Novel nanohydrogel based on itaconic acid grafted tragacanth gum for controlled release of ampicillin

Advances in preparation and application of antibacterial hydrogels

Bacterial infections, especially those caused by drug-resistant bacteria, have seriously threatened human life and health. There is urgent to develop new antibacterial agents to reduce the problem of antibiotics. Biomedical materials with good antimicrobial properties have been widely used in antibacterial applications. Among them, hydrogels have become the focus of research in the field of biomedical materials due to their unique three-dimensional network structure, high hydrophilicity, and good biocompatibility. In this review, the latest research progresses about hydrogels in recent years were summarized, mainly including the preparation methods of hydrogels and their antibacterial applications. According to their different antibacterial mechanisms, several representative antibacterial hydrogels were introduced, such as antibiotics loaded hydrogels, antibiotic-free hydrogels including metal-based hydrogels, antibacterial peptide and antibacterial polymers, stimuli-responsive smart hydrogels, and light-mediated hydrogels. In addition, we also discussed the applications and challenges of antibacterial hydrogels in biomedicine, which are expected to provide new directions and ideas for the application of hydrogels in clinical antibacterial therapy.

From Plants to Wound Dressing and Transdermal Delivery of Bioactive Compounds

Transdermal delivery devices and wound dressing materials are constantly improved and upgraded with the aim of enhancing their beneficial effects, biocompatibility, biodegradability, and cost effectiveness. Therefore, researchers in the field have shown an increasing interest in using natural compounds as constituents for such systems. Plants, as an important source of so-called "natural products" with an enormous variety and structural diversity that still exceeds the capacity of present-day sciences to define or even discover them, have been part of medicine since ancient times. However, their benefits are just at the beginning of being fully exploited in modern dermal and transdermal delivery systems. Thus, plant-based primary compounds, with or without biological activity, contained in gums and mucilages, traditionally used as gelling and texturing agents in the food industry, are now being explored as valuable and cost-effective natural components in the biomedical field. Their biodegradability, biocompatibility, and non-toxicity compensate for local availability and compositional variations. Also, secondary metabolites, classified based on their chemical structure, are being intensively investigated for their wide pharmacological and toxicological effects. Their impact on medicine is highlighted in detail through the most recent reported studies. Innovative isolation and purification techniques, new drug delivery devices and systems, and advanced evaluation procedures are presented.

Swelling induced mechanically tough starch-agar based hydrogel as a control release drug vehicle for wound dressing applications

In recent years, polysaccharide-based hydrogels have received increased attention due to their inherent biodegradability, biocompatibility, and non-toxicity. The feasibility of using polysaccharides for the synthesis of hydrogels is dependent on their noteworthy mechanical strength and cell compatibility, which are required for practical applications, especially for biomedical uses. In this study, we demonstrate a facile synthetic route for the construction of a mechanically tough, biocompatible, and biodegradable hydrogel using polysaccharides such as starch and agar. A synthetic monomer-free hydrogel was synthesized using epichlorohydrin as a cross-linker, and a mechanical strength of 9.49 ± 1.29-6.16 ± 0.37 MPa was achieved. The introduction of agar into the hydrogel resulted in agar dose-dependent swelling-induced mechanical strength. Moreover, along with incredible mechanical strength, the hydrogel also exhibited prominent cell viability against human embryonic kidney cells. In addition, the hydrogel showed good encapsulation efficiency for antibacterial drugs like ciprofloxacin hydrochloride hydrate, with controlled releasing ability over a sustained period. The antibacterial activity of the encapsulated drug was observed against Staphylococcus aureus and Bacillus subtilis bacterial strains. Thus, the studied hydrogel with loaded drug exhibited all the required qualities to be utilized as a promising candidate in wound dressing applications.

Self-cross-linked starch/chitosan hydrogel as a biocompatible vehicle for controlled release of drug

A facile one-pot approach was adopted to prepare a polysaccharide-based hydrogel of oxidized starch (OS)-chitosan. The synthetic monomer-free, eco-friendly hydrogel was prepared in an aqueous solution and employed for controlled drug release application. The starch was first oxidized under mild conditions to prepare its bialdehydic derivative. Subsequently, the amino group-containing a modified polysaccharide, "chitosan" was introduced on the backbone of OS via a dynamic Schiff-base reaction. The bio-based hydrogel was obtained via a one-pot in-situ reaction, where functionalized starch acts as a macro-cross-linker that contributes structural stability and integrity to the hydrogel. The introduction of chitosan contributes stimuli-responsive properties and thus pH-sensitive swelling behavior was obtained. The hydrogel showed its potential as a pH-dependent controlled drug release system and a maximum of 29 h sustained release period was observed for ampicillin sodium salt drug. In vitro studies confirmed that the prepared drug-loaded hydrogels showed excellent antibacterial ability. Most importantly, the hydrogel could find potential use in the biomedical field due to its facile reaction conditions, biocompatibility along with the controlled releasing ability of the encapsulated drug.

Guar gum, a low-cost sustainable biopolymer, for wastewater treatment: A review

Rapid population growth and the resultant pollution of freshwater resources have created a water stress condition reducing the availability of safe and affordable water. Guar gum, a biocompatible macromolecule obtained from the endosperm of the seeds of Cyamopsis tetragonolobus, is a fascinating raw material for multifunctional adsorbents. This review assembled the work conducted by various researchers over the past few decades and discussed the structure, properties, and different modifications methods employed to develop versatile guar gum-based adsorbent. The paper also summarized the recent progress of guar gum-based nanocomposites for the remediation of multiple hazardous substances such as organic dyes, toxic heavy metal ions, oil-water separation as well as inhibiting the growth of bacterial pathogens. Thus, the important contribution of guar gum composites to safeguard the water quality is highlighted which will overcome the limitations and streamline the future course of innovative research.

Sustainable Downstream Separation of Itaconic Acid Using Carbon-Based Adsorbents

Separation of itaconic acid from aqueous solution has been explored using various carbon-based adsorbents obtained from the pyrolysis and KOH activation of coconut shell biomass. The best preparation conditions to obtain a tailored adsorbent for itaconic acid purification were identified via a Taguchi experimental design, where its adsorption properties were maximized. The best activated carbon was obtained via coconut shell pyrolysis at 750 °C for 4 h plus an activation with 0.1 KOH and a final treatment at 800 °C for 2 h. This adsorbent showed an adsorption capacity of 4.31 mmol/g at 20 °C and pH 3 with a surface area of 466 m2/g. Itaconic acid separation was exothermic and pH-dependent where electrostatic forces and hydrogen bonding were the main adsorption interactions. Calculated adsorption rate constants for itaconic acid adsorption were 0.44–1.20 h-1. Results of adsorbent characterization analysis indicated the presence of a crystallization of itaconic acid molecules onto the activated carbon surface where 3–4 molecules could interact to form the clusters. This organic acid was recovered from the adsorbent surface via desorption with water or ethanol, thus facilitating its final purification. The best activated carbon obtained in this study is a promising alternative to perform sustainable and energy-efficient downstream separation and purification of itaconic acid produced via fermentation.

Comparative Study of Polysaccharide-Based Hydrogels: Rheological and Texture Properties and Ibuprofen Release

Polysaccharides are attractive gelling agents in pharmacy due to their safety, biocompatibility, biodegradability, relatively easy way of preparation, and low price. Due to their variable physical-chemical properties, polysaccharides have potentialities to be used for designing new drug delivery systems for controlled drug release. In this comparative study, rheological and texture properties as well as the in vitro release of model drug ibuprofen (IBU) with 11 polysaccharide-based hydrogels were investigated. The in vitro release of IBU significantly differed between (i) neutral (hydroxy/alkylcelluloses), (ii) anionic (carboxyalkylcellulose and its sodium salt, tragacanth, carrageenan, xanthan gum), and (iii) cationic (chitosans) hydrogels due to different contribution of provided interactions and viscosity within the hydrogel groups. The drug release kinetics of each hydrogel system was evaluated for five kinetic models. Several combinations of cationic hydrogels with neutral or anionic ones were performed to illustrate possibilities of providing modified IBU release profiles. In this context, chitosan was presented as an effective modifier of diffusion profiles for negatively charged drugs formulated into combined polymeric systems, providing their prolonged release. The most appropriate hydrogel for the topical application (i.e., providing favorable rheological and texture properties along with the highest drug release) was selected from a studied series of polysaccharide-based hydrogels.

Synthesis of gum tragacanth-grafted pentapolymer hydrogels for As(III) exclusion: Roles of microwaves, RSM optimization, and DFT studies

Microwave assisted homogeneous heating, selectivity in radical formation, and the faster polymerization facilitate the synthesis, structures, properties, and the higher branching associated stability of multifunctional multipolymers. Thus, the optimum gum tragacanth (GMTR)-grafted pentapolymer hydrogel/ HG2 was synthesized from three monomers, i.e., cis-butenedioic acid (cBDA), N-hydroxymethylacryalamide (NHMAm), and 2-(methacryloyloxy)ethanol (MAOE), and in situ generated 2-(3-((hydroxymethyl)amino)-3-oxopropoxy)ethyl-2-methylbutanoate (CM1) and 2-hydroxyethyl 3-(N-(hydroxymethyl)-2-methylbutanamido)-2-methylpropanoate (CM2) comonomers through microwave assisted facile polymerization in aqueous medium. Here, twenty-one GMTR-grafted-[cBDA-co-CM1-co-NHMAm-co-CM2-co-MAOE/ HG1] hydrogels were prepared by using variable amounts of synthesis parameters, of which the optimum HG2 was chosen for the scale-up repetitive As(III)-exclusion. RSM was used to measure the optimum power-temperature-time of microwave irradiation. The structures of HG1, HG2, and As(III)-adsorbed HG2/ As(III)-HG2, in situ anchored comonomers, GMTR-grafting, reusability, thermostability, and surface phenomena were comprehended by XPS, NMR, UV-vis, FTIR, TG, XRD, DLS, and SEM analyses; pH_PZC; network parameters; and thermodynamic variables. The geometries, electronic structures, and variable coordinations of As(III) with HG2 were investigated through DFT studies of HG2 and As(OH)₃-HG2. The highest exclusion efficiency of 25 mg HG2 within 5-100 mg L^-1 As(III) and at 298 K was 192.91 mg g^-1, which was significantly higher than that of HG1.

Scale-up one-pot synthesis of waste collagen and apple pomace pectin incorporated pentapolymer biocomposites: Roles of waste collagen for elevations of properties and unary/ ternary removals of Ti(IV), As(V), and V(V)

Herein, hazardous solid particulate waste collagenic fibers (SWCFs) of leather industries were incorporated into apple pomace pectin (APPN)-grafted-pentapolymer, i.e., APPN-g-[sodium 2-methylidenebutanedioate(SMBD)-co-N-((3-(isopropylamino)-3-oxopropoxy) methyl) butyramide (CM1)-co-N-(hydroxymethyl)prop-2-enamide (NHMPE)-co-N-(hydroxymethyl)-4-(N-isopropylbutyramido)butanamide (CM2)-co-N-(propan-2-yl)prop-2-enamide NPYPE)/ PENP1], i.e., APPN-g-PENP1/ PENP2, prepared via one-pot facile polymerization of APPN and synthetic monomers, i.e., SMBD, NHMPE, and NPYPE, in aqueous medium, to fabricate an optimum multifunctional hybrid biocomposite adsorbent/ HCOM3. In PENP1, PENP2, and HCOM3, fourth/ CM1 and fifth/ CM2 multifunctional comonomers were anchored in situ. The structures of PENP1, PENP2, HCOM3, CM1, CM2, and metal-ion adsorbed HCOM3; APPN-grafting; SWCF incorporation; and surface properties were analyzed through NMR, XPS, FTIR, XRD, and SEM. The elevated adsorption efficiencies (AEs), reusability, thermostability, swelling, network durability, and crosslink density of HCOM3 were attributed to variable functionalities of SWCF/ APPN, explored by DLS and TGA, swelling, network, and thermodynamic parameters. Compared to SWCF, APPN, PENP1, and PENP2, the elevated AEs and reusability compelled HCOM3 as more suitable for scalable waste management. The maximum AEs, i.e., 171.79, 180.47, and 177.27 mg g^-1, for Ti(IV), As(V), and V(V) at pH_op = 7.0, 3.0, and 5.0, respectively, within 5-100 mg L^-1 and at 298 K for 25 mg HCOM3 deteriorated during ternary adsorption by the antagonistic effects.

Gum Tragacanth (GT): A Versatile Biocompatible Material beyond Borders

The use of naturally occurring materials in biomedicine has been increasingly attracting the researchers’ interest and, in this regard, gum tragacanth (GT) is recently showing great promise as a therapeutic substance in tissue engineering and regenerative medicine. As a polysaccharide, GT can be easily extracted from the stems and branches of various species of Astragalus. This anionic polymer is known to be a biodegradable, non-allergenic, non-toxic, and non-carcinogenic material. The stability against microbial, heat and acid degradation has made GT an attractive material not only in industrial settings (e.g., food packaging) but also in biomedical approaches (e.g., drug delivery). Over time, GT has been shown to be a useful reagent in the formation and stabilization of metal nanoparticles in the context of green chemistry. With the advent of tissue engineering, GT has also been utilized for the fabrication of three-dimensional (3D) scaffolds applied for both hard and soft tissue healing strategies. However, more research is needed for defining GT applicability in the future of biomedical engineering. On this object, the present review aims to provide a state-of-the-art overview of GT in biomedicine and tries to open new horizons in the field based on its inherent characteristics.

Synthesis, characterization and fabrication of sodium carboxymethyl-okra-gum-grafted-polymethacrylamide into sustained release tablet matrix

The objective of the present study was to modify okra gum (Abelmoschus esculentus) by carboxymethylation and subsequent graft-copolymerization, characterize and fabricate into sustained-release tablet matrix. Firstly, okra gum was carboxymethylated using sodium hydroxide and monochloroacetic acid followed by grafting with polymethacrylamide employing synergistic combination of free-radical-initiator and microwave-irradiation. The FTIR, NMR, elemental analysis and viscosity study corroborate the formation of sodium-carboxymethyl-okra gum-grafted-polymethacrylamide copolymer (SCMOG-g-PMA). The maximum degree of carboxymethyl-substitution (DCS) and % grafting (%G) were found to be 0.604 ± 0.011 and 644.1, respectively. Water-uptake-capacity was found to increase by 3.5 fold. The tablet formulation of diclofenac sodium with SCMOG-g-PMA (DCS 0.604 and 423.4% G) showed to exhibit excellent sustained-release capacity with 90% drug-release at 11.7 h and similarity-factor of 72.0. The toxicity and biodegradability study also exhibited the bio-compatible and biodegradable nature of the copolymer, which might make the copolymer suitable for sustained-release drug delivery systems as smart semi-synthetic biopolymer.

Biologically active PET/polysaccharide-based nanofibers post-treated with selenium/Tragacanth Gum nanobiocomposites

Polysaccharide-based nanofibers from Tragacanth Gum (TG) and polyethylene terephthalate (PET) were post-treated with selenium nanoparticles (Se NPs) and also stabilized with TG (SeNPs/TG). DLS, FE-SEM, EDX, TEM, and XRD were employed to verify the synthesis of Se NPs. The relatively narrow size distribution of SeNPs/TG showed through TEM and DLS investigations comparing with Se NPs. The Se NPs formation with and without TG was studied with FTIR confirmed the final stabilized solution due to the bonded hydroxyl groups of TG with Se NPs. Also, a relatively higher antioxidant reported on SeNPs/TG at 0.5-5 mg/mL using DPPH scavenging ability. The Se NPs and SeNPs/TG solutions specified remarkable inhibition against Staphylococcus aureus and Candida albicans; however, no significant antibacterial activities observed on the treated nanofibers. Finally, the uniform migration of fibroblast cells in wound healing of the treated nanofibers with SeNPs/TG proved the value of the products in medical applications.

Microwave-Assisted Rapid Synthesis of Reduced Graphene Oxide-Based Gum Tragacanth Hydrogel Nanocomposite for Heavy Metal Ions Adsorption

Reduced graphene oxide (RGO) was synthesized in this research via Tour's method for the use of filler in the hydrogel matrix. The copolymerization of N,N-dimethylacrylamide (DMA) onto the gum tragacanth (GT) was carried out to develop gum tragacanth-cl-N,N-dimethylacrylamide (GT-cl-poly(DMA)) hydrogel using N,N'-methylenebisacrylamide (NMBA) and potassium persulfate (KPS) as cross-linker and initiator correspondingly. The various GT-cl-poly(DMA) hydrogel synthesis parameters were optimized to achieve maximum swelling of GT-cl-poly(DMA) hydrogel. The optimized GT-cl-poly(DMA) hydrogel was then filled with RGO to form reduced graphene oxide incorporated gum tragacanth-cl-N,N-dimethylacrylamide (GT-cl-poly(DMA)/RGO) hydrogel composite. The synthesized samples were used for competent adsorption of Hg²⁺ and Cr⁶⁺ ions. Fourier transform infrared, X-ray powder diffraction, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy were used to characterize the gum tragacanth-cl-N,N-dimethylacrylamide hydrogel and reduced graphene oxide incorporated gum tragacanth-cl-N,N-dimethylacrylamide hydrogel composite. The experiments of adsorption-desorption cycles for Hg²⁺ and Cr⁶⁺ ions were carried out to perform the reusability of gum tragacanth-cl-N,N-dimethylacrylamide hydrogel and reduced graphene oxide incorporated gum tragacanth-cl-N,N-dimethylacrylamide hydrogel composite. From these two samples, reduced graphene oxide incorporated gum tragacanth-cl-N,N-dimethylacrylamide exhibited high adsorption ability. The Hg²⁺ and Cr⁶⁺ ions adsorption by gum tragacanth-cl-N,N-dimethylacrylamide and reduced graphene oxide incorporated gum tragacanth-cl-N,N-dimethylacrylamide were best suited for pseudo-second-order kinetics and Langmuir isotherm. The reported maximum Hg²⁺ and Cr⁶⁺ ions adsorption capacities were 666.6 mg g^-1 and 473.9 mg g^-1 respectively.

Synthesis of chemically cross-linked hydrogel films based on basil seed (Ocimum basilicum L.) mucilage for wound dressing drug delivery applications

The present study aims toward the preparation of pH-sensitive hydrogel films based on basil seed mucilage (OBM) biopolymer as a novel drug delivery system for wound dressing. Various contents of polyvinyl alcohol (PVA), glutaraldehyde (GA) as cross-linker, and glycerol as a plasticizer were incorporated to have an optimal combination of softness and resilience. OBM hydrogel films characterized by FT-IR, thermogravimetric analysis (TGA), morphological analysis by scanning electron microscope (SEM) and their physical properties were discussed on the reportage of the results of several tests: rheology, mechanical tests (stress at maximum load and Young's modulus), O₂ permeability and water vapor permeability, gel fraction, water retention capacity and swelling degree measurements. The best results for this work were Mu-Gly2, which has the acceptable swelling degree and gel fraction leading to functional water retention capacity, as well as the selected formulations, which were non-toxic and biocompatible according to the result of cytotoxicity test. The optimized formulations of films were used for loading of Tetracycline hydrochloride (TH) as a model drug, and the release studies showed better results at pH = 8.5 and pH = 7.4 rather than acidic pH.

Biomass-Derived Production of Itaconic Acid as a Building Block in Specialty Polymers

Biomass, the only source of renewable organic carbon on Earth, offers an efficient substrate for bio-based organic acid production as an alternative to the leading petrochemical industry based on non-renewable resources. Itaconic acid (IA) is one of the most important organic acids that can be obtained from lignocellulose biomass. IA, a 5-C dicarboxylic acid, is a promising platform chemical with extensive applications; therefore, it is included in the top 12 building block chemicals by the US Department of Energy. Biotechnologically, IA production can take place through fermentation with fungi like Aspergillus terreus and Ustilago maydis strains or with metabolically engineered bacteria like Escherichia coli and Corynebacterium glutamicum. Bio-based IA represents a feasible substitute for petrochemically produced acrylic acid, paints, varnishes, biodegradable polymers, and other different organic compounds. IA and its derivatives, due to their trifunctional structure, support the synthesis of a wide range of innovative polymers through crosslinking, with applications in special hydrogels for water decontamination, targeted drug delivery (especially in cancer treatment), smart nanohydrogels in food applications, coatings, and elastomers. The present review summarizes the latest research regarding major IA production pathways, metabolic engineering procedures, and the synthesis and applications of novel polymeric materials.

Recent progress in the industrial and biomedical applications of tragacanth gum: A review

Natural polymers have distinct advantages over synthetic polymers because of their abundance, biocompatibility, and biodegradability. Tragacanth gum, an anionic polysaccharide, is a natural polymer which is derived from renewable sources. As a biomaterial, tragacanth gum has been used in industrial settings such as food packaging and water treatment, as well as in the biomedical field as drug carriers and for wound healing purposes. The present review provides an overview on the state-of-the-art in the field of tragacanth gum applications. The structure, properties, cytotoxicity, and degradability as well as the recent advances in industrial and biomedical applications of tragacanth gum are reviewed to offer a backdrop for future research.