Chitosan-based drug delivery systems: From synthesis strategy to osteomyelitis treatment - A review

Dual-Loaded Chitosan-Based Nanoparticles: A Novel approach for treating polymicrobial osteomyelitis

Developing innovative approaches to target osteomyelitis caused by polymicrobial infections remains a significant therapeutic challenge. In this study, monodispersed chitosan nanoparticles co-loaded with antibacterial (minocycline) and antifungal (voriconazole) agents were successfully prepared. Minocycline presented higher encapsulation efficiency as compared to voriconazole. Thermostability analysis suggested interactions between the co-loaded drugs within the dual-delivery system, potentially limiting voriconazole release. The dual-loaded chitosan nanoparticles exhibited significant in vitro anti-biofilm activity, achieving up to a 90% reduction in polymicrobial biofilms of S. aureus and C. albicans. Additionally, the nanoparticles showed cytocompatibility with a human osteoblast cell line. These findings highlight the potential of this dual-delivery chitosan-based nanoparticle system to address a critical gap in osteomyelitis treatment by targeting both bacterial and fungal pathogens.

Chitosan-exosome synergy: Advanced cell-free scaffold approaches for bone tissue engineering

Bone regeneration and repair, which are hampered by fractures, bone diseases, and trauma, require innovative therapeutic strategies in the field of regenerative medicine. Conventional treatments, such as the use of autologous and allogeneic bone grafts and metal implants, are the primary modalities for bone augmentation in clinical practice; however, they exhibit various limitations. To overcome these limitations, new paradigms, such as exosome-based therapies using chitosan scaffolds, exhibit significant potential for bone tissue engineering. Exosomes, which serve as cell-free therapeutic agents, promote immunomodulation, angiogenesis, and osteogenesis. Moreover, the distinct structural and functional properties of chitosan facilitate efficient exosome loading and sustained release, exerting localized and prolonged regenerative effects crucial for bone repair. Advanced scaffold modification and exosome mimetic integration are other innovative strategies to promote osteogenesis and vascularized bone regeneration. Focusing on these novel approaches, this review highlights chitosan-exosome scaffolds as transformative platforms for bone tissue engineering, providing new avenues for effective and targeted bone regeneration and repair.

Antibacterial and osteogenic properties of chitosan-polyethylene glycol nanofibre-coated 3D printed scaffold with vancomycin and insulin-like growth factor-1 release for bone repair

3D printing, as a layer-by-layer manufacturing technique, enables the customization of tissue engineering scaffolds. Surface modification of biomaterials is a beneficial approach to enhance the interaction with living cells and tissues. In this research, a polylactic acid/polyethylene glycol scaffold containing 30 % bredigite nanoparticles (PLA/PEG/B) was fabricated utilizing fused deposition modeling (FDM) 3D printing. To modify the surface properties and facilitate the loading and release of therapeutics, the scaffold was coated with chitosan-polyethylene glycol (CS-PEG) nanofibers incorporating vancomycin (V) and insulin-like growth factor-1 (IGF1). The characterization was conducted using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The results demonstrated that the release of V (93.43 %) and IGF1 (95.86 %) from the fabricated scaffolds persisted for 28 days in a phosphate-buffered saline (PBS) solution. The release of V resulted in antibacterial activity against Staphylococcus aureus (S. aureus), forming an inhibition zone of 21.16 mm. Additionally, it was demonstrated that the release of IGF1 could counteract the adverse effect of V release on cell behavior, and enhance the adhesion and proliferation of MG63 cells. Preclinical in vivo studies conducted on a rat calvarial defect model validated that the bone repair was fully completed in the group treated with the fabricated scaffold within 8 weeks. Consequently, the scaffold designed in this study can serve as a versatile scaffold for achieving perfect repair of craniofacial defects.

Chitosan as a Plurivalent Biopolymer in Nanodelivery Systems

(1) Background: This review study will delve into the potential of chitosan nanoparticles (NPs) as adaptable carriers for targeted drug delivery in different therapeutic areas. Chitosan is a biopolymer derived from chitin that has attracted interest in drug delivery applications because of its high biocompatibility and biodegradability. (2) Methods: A comprehensive literature review was conducted by following a careful systematized protocol for searching databases like PubMed, Google Scholar and ScienceDirect. (3) Results: Chitosan NPs are good drug delivery vehicles, notably for cancer. Studies reveal that doxorubicin-loaded chitosan NPs dramatically enhance toxicity to tumor cells compared to free medicines, yielding tumor suppression rates of up to 60%. Researchers found that chemotherapeutics had an 85% encapsulation efficiency (EE), lowering systemic toxicity. Magnetic and pH-responsive chitosan NPs boost drug accumulation by 63% and apoptosis by 54%. Chitosan also boosts medication retention in the lungs by 2.3×, per pulmonary delivery trials. Chitosan NPs also boost ocular medication bioavailability by 3× and improve nasal absorption by 30%, crossing the blood-brain barrier. For bone regeneration, chitosan scaffolds enhance bone mineral density by 46%, facilitating osteogenesis and healing. (4) Conclusions: NPs made of chitosan provide a solid foundation for improving drug delivery systems; yet there are still issues with material variability, scalability, and meeting regulatory requirements that need fixing. Research into combination treatments, ways to increase their specificity, and ways to optimize these NPs offers promising prospects for the creation of novel therapeutic approaches with the potential to improve patient outcomes.

Current developments and prospects of the antibiotic delivery systems

Antibiotics have remained the cornerstone for the treatment of bacterial infections ever since their discovery in the twentieth century. The uproar over antibiotic resistance among bacteria arising from genome plasticity and biofilm development has rendered current antibiotic therapies ineffective, urging the development of innovative therapeutic approaches. The development of antibiotic resistance among bacteria has further heightened the clinical failure of antibiotic therapy, which is often linked to its low bioavailability, side effects, and poor penetration and accumulation at the site of infection. In this review, we highlight the potential use of siderophores, antibodies, cell-penetrating peptides, antimicrobial peptides, bacteriophages, and nanoparticles to smuggle antibiotics across impermeable biological membranes to achieve therapeutically relevant concentrations of antibiotics and combat antimicrobial resistance (AMR). We will discuss the general mechanisms via which each delivery system functions and how it can be tailored to deliver antibiotics against the paradigm of mechanisms underlying antibiotic resistance.

The role of metal nanocarriers, liposomes and chitosan-based nanoparticles in diabetic retinopathy treatment: A review study

Diabetic Retinopathy (DR) is a significant and progressive eye complication associated with diabetes mellitus, leading to potential vision loss. The pathophysiology of DR involves complex neurovascular changes due to prolonged hyperglycemia, resulting in microangiopathy and neurodegeneration. Current treatment modalities come with limitations such as low bioavailability of therapeutic agents, risk of side effects, and surgical complications. Consequently, the prevention and management of DR, particularly in its advanced stages, present ongoing challenges. This review investigates recent advancements in nanotechnology as a novel approach to enhance the treatment of DR. A comprehensive literature review of recent studies focusing on nanocarriers for drug delivery in DR treatment and an analysis of their efficacy compared to traditional methods was conducted for this study. The findings indicate that nanotechnology can significantly enhance the bioavailability of therapeutic agents while minimizing systemic exposure and associated side effects. The novelty of this study lies in its focus on the intersection of nanotechnology and ophthalmology, exploring innovative solutions that extend beyond existing literature on DR treatments. By highlighting recent advancements in this field, the study paves the way for future research aimed at developing more effective therapeutic strategies for managing DR.

Current knowledge of vertebral osteomyelitis: a review

PURPOSE

As life expectancy increases worldwide, the elderly population in every country is growing in both the size and proportion. This review aims to provide a comprehensive overview of the microbiology, clinical presentation, diagnostic strategies, and therapeutic approaches to vertebral osteomyelitis, summarizing the latest evidence to guide effective treatment.

METHODS

A comprehensive literature search was conducted using the Medline and Embase databases to identify relevant studies on vertebral osteomyelitis. The search included the following keywords: "vertebral osteomyelitis," "spinal infection," "discitis," "spondylitis," " spondylodiscitis," and "spinal epidural abscess." Both retrospective and prospective studies, case series, and reviews were considered.

RESULTS

This condition is commonly caused by bacteria such as Staphylococcus aureus or gram-negative bacilli, but can also be caused by other pathogens like fungi and parasites. The onset of vertebral osteomyelitis is insidious, with low specificity in clinical manifestations, often making early diagnosis difficult. Delayed or inadequate treatment may lead to sepsis, permanent neurological damage, or even death. Treatment strategies emphasize the importance of identifying the causative pathogen to guide effective antimicrobial therapy. Current consensus does not advocate for empirical antibiotic treatment unless patients exhibit signs of neurological impairment or severe sepsis. Severe cases involving neurological paralysis, spinal instability, or sepsis may require surgical intervention.

CONCLUSION

Vertebral osteomyelitis requires prompt diagnosis and treatment for a good prognosis. Delayed diagnosis and treatment can lead to permanent neurological deficits or death. Identifying the causative organism is crucial for guiding appropriate antimicrobial therapy. In addition to conservative and surgical treatments, local drug delivery systems offer new approaches to managing spinal osteomyelitis.

Chitosan-Based Hydrogels as Antibacterial/Antioxidant/Anti-Inflammation Multifunctional Dressings for Chronic Wound Healing

Due to repeated microbial infection, persistent inflammation, excessive oxidative stress, and cell dysfunction, chronic wounds are difficult to heal, posing a serious threat to public health. Therefore, developing multifunctional wound dressings that can regulate the complex microenvironment of chronic wounds and enhance cellular function holds great significance. Recently, chitosan has emerged as a promising biopolymer for wound healing due to its excellent biocompatibility, biodegradability, and versatile bioactivity. The aim of this review is to provide a comprehensive understanding of the mechanisms of delayed chronic wound healing and discuss the healing-promoting properties of chitosan and its derivatives, such as good biocompatibility, antibacterial activity, hemostatic capacity, and the ability to promote tissue regeneration. On this basis, the potential applications of chitosan-based hydrogels are summarized in chronic wound healing, including providing a suitable microenvironment, eliminating bacterial infections, promoting hemostasis, inhibiting chronic inflammation, alleviating oxidative stress, and promoting tissue regeneration. In addition, the concerns and perspectives for the clinical application of chitosan-based hydrogels are also discussed.

Recent developments in the biomedical and anticancer applications of chitosan derivatives

Chitosan is a natural polymer derived from chitin. It has significant applications in various fields due to its unique physicochemical properties, biocompatibility, and biodegradability. These important properties of chitosan make it an attractive candidate for various anti-cancer activities and biomedical applications, including tissue engineering. This review emphasizes the latest literature on anticancer applications of chitosan derivatives and in-depth study of biomedical applications. This review highlights the importance of biomedical applications and anti-cancer activities like breast, liver, colon, gastric, melanoma, colorectal, cervical, oral, and lymphoma cancer. Currently, there is a notable absence of recent reviews that comprehensively address these aspects such as Alejandro Elizalde-Cárdenas, et al. 2024, focuses only on Biomedical applications of Cs and its derivatives (Elizalde-Cárdenas et al., 2024). Jingxian Ding, et al. 2022 discussed the applications of Cs in some Cancer treatments (Mabrouk et al., 2024). However, our article aims to provide a comprehensive overview of the latest advancements in Cs derivatives in both fields. This manuscript is designed with proper diagrams, flow sheets and summarized tables to enhance the understanding of the reader. It also highlights recent advancements in the development of various chitosan derivatives, offering a comprehensive perspective for researchers and practitioners to further progress in biomedical and anticancer technologies.

3D chitosan/hydroxyapatite scaffolds containing mesoporous SiO2-HA particles: A new step to healing bone defects

Biocompatible scaffolds with high mechanical strengths that contain biodegradable components could boost bone regeneration compared with nondegradable bone repair materials. In this study, porous chitosan (CS)/hydroxyapatite (HA) scaffolds containing mesoporous SiO2-HA particles were fabricated through the freeze-drying process. According to field emission scanning electron microscopy (FESEM) results, combining mesoporous SiO2-HA particles in CS/HA scaffolds led to a uniform porous structure. It decreased pore sizes from 320 ± 1.1 μm to 145 ± 1.4 μm. Moreover, the compressive strength value of this scaffold was 25 ± 1.2 MPa. The in-vitro approaches exhibited good sarcoma osteogenic cell line (SAOS-2) adhesion, spreading, and proliferation, indicating that the scaffolds provided a suitable environment for cell cultivation. Also, in-vivo analyses in implanted defect sites of rats proved that the CS/HA/mesoporous SiO2-HA scaffolds could promote bone regeneration via enhancing osteoconduction and meliorating the expression of osteogenesis gene to 19.31 (about 5-fold higher compared to the control group) by exposing them to the bone-like precursors. Further, this scaffold's new bone formation percentage was equal to 90 % after 21 days post-surgery. Therefore, incorporating mesoporous SiO2-HA particles into CS/HA scaffolds can suggest a new future tissue engineering and regeneration strategy.

Techniques and applications in 3D bioprinting with chitosan bio-inks for drug delivery: A review

Three-dimensional bioprinting leverages computer-aided design to construct tissues and organs with specialized bioinks. A notable biomaterial for this purpose is chitosan, a natural polysaccharide sourced from crustacean exoskeletons. Chitosan's biocompatibility, biodegradability, non-toxicity, and ability to promote cell adhesion and proliferation make it an excellent component for bioinks. Initially, the rheological properties of chitosan presented challenges for its use in bioprinting. Enhancements in its printability and stability were achieved by integrating it with other natural or synthetic polymers, facilitating its successful application in bioprinting. Chitosan-based bioinks are particularly promising for controlled drug delivery. Incorporating pharmaceuticals directly into the bioink enables the printed structures to serve as localized, sustained-release systems. This approach offers multiple advantages, including precise drug delivery to targeted disease sites, increased therapeutic efficiency, and reduced systemic side effects. Moreover, bioprinting allows for the customization of drug delivery mechanisms to meet individual patient requirements. Although there have been considerable advancements, the use of chitosan-based bioinks in drug delivery is still an emerging field. This review highlights chitosan's essential role in both systemic and localized drug delivery, underscoring its significance and discussing ongoing trends in its application for pharmaceutical purposes.

Recent advances on chitosan/hyaluronic acid-based stimuli-responsive hydrogels and composites for cancer treatment: A comprehensive review

Cancer, as leading cause of death, has a high rate of mortality worldwide. Although there is a wide variety of conventional approaches for the treatment of cancer (such as surgery and chemotherapy), they have considerable drawbacks in terms of practicality, treatment efficiency, and cost-effectiveness. Therefore, there is a fundamental requirement for the development of safe and efficient treatment modalities based on breakthrough technologies to suppress cancer. Chitosan (CS) and hyaluronic acid (HA) polysaccharides, as FDA-approved biomaterials for some biomedical applications, are potential biopolymers for the efficient treatment of cancer. CS and HA have high biocompatibility, bioavailability, biodegradability, and immunomodulatory function which guarantee their safety and non-toxicity. CS-/HA-based hydrogels (HGs)/composites stand out for their potential anticancer function, versatile preparation and modification, ease of administration, controlled/sustained drug release, and active and passive drug internalization into target cells which is crucial for efficient treatment of cancer compared with conventional treatment approaches. These HGs/composites can respond to external (magnetic, ultrasound, light, and thermal) and internal (pH, enzyme, redox, and ROS) stimuli as well which further paves the way to their manipulation, targeted drug delivery, practicality, and efficient treatment. The above-mentioned properties of CS-/HA-based HGs/composites are unique and practical in cancer treatment which can ignore the deficiencies of conventional approaches. The present manuscript comprehensively highlights the advances in the practical application of stimuli-responsive HGs/composites based on CS/HA polysaccharides.

Unveiling the potential of chitosan-coated lipid nanoparticles in drug delivery for management of critical illness: a review

Chitosan (CT), a natural, cationic, chemically stable molecule, biocompatible, biodegradable, nontoxic, polysaccharide derived from the deacetylation of chitin, has very uniquely surfaced as a material of promise for drug delivery and biomedical applications. For the oral, ocular, cutaneous, pulmonary, and nose-to-brain routes, CT-coated nanoparticles (CTCNPs) have numerous advantages, consisting of improved controlled drug release, physicochemical stability, improved cell and tissue interactions, and increased bioavailability and efficacy of the active ingredient. CTCNPs have a broad range of therapeutic properties including anticancer, antiviral, antifungal, anti-inflammatory, antibacterial properties, treating neurological disorders, and other diseases. This has led to substantial research into the many potential uses of CT as a drug delivery vehicle. CT has also been employed in a wide range of biomedical processes, including bone and cartilage tissue regeneration, ocular tissue regeneration, periodontal tissue regeneration, heart tissue regeneration, and wound healing. Additionally, CT has been used in cosmeceutical, bioimaging, immunization, and gene transfer applications. CT exhibits a number of biological activities, which are the basis for its remarkable potential for use as a drug delivery vehicle, and these activities are covered in detail in this article. The alterations applied to CT to obtain the necessary properties have been described.

3D printing processes in precise drug delivery for personalized medicine

With the advent of personalized medicine, the drug delivery system will be changed significantly. The development of personalized medicine needs the support of many technologies, among which three-dimensional printing (3DP) technology is a novel formulation-preparing process that creates 3D objects by depositing printing materials layer-by-layer based on the computer-aided design method. Compared with traditional pharmaceutical processes, 3DP produces complex drug combinations, personalized dosage, and flexible shape and structure of dosage forms (DFs) on demand. In the future, personalized 3DP drugs may supplement and even replace their traditional counterpart. We systematically introduce the applications of 3DP technologies in the pharmaceutical industry and summarize the virtues and shortcomings of each technique. The release behaviors and control mechanisms of the pharmaceutical DFs with desired structures are also analyzed. Finally, the benefits, challenges, and prospects of 3DP technology to the pharmaceutical industry are discussed.

Unveiling the potentials of hydrophilic and hydrophobic polymers in microparticle systems: Opportunities and challenges in processing techniques

Conventional drug delivery systems are associated with various shortcomings, including low bioavailability and limited control over release. Biodegradable polymeric microparticles have emerged as versatile carriers in drug delivery systems addressing all these challenges. This comprehensive review explores the dynamic landscape of microparticles, considering the role of hydrophilic and hydrophobic materials. Within the continuously evolving domain of microparticle preparation methods, this review offers valuable insights into the latest advancements and addresses the factors influencing microencapsulation, which is pivotal for harnessing the full potential of microparticles. Exploration of the latest research in this dynamic field unlocks the possibilities of optimizing microencapsulation techniques to produce microparticles of desired characteristics and properties for different applications, which can help contribute to the ongoing evolution in the field of pharmaceutical science.

A Smart Bacteria-Capture-Killing Vector for Effectively Treating Osteomyelitis Through Synergy Under Microwave Therapy

Osteomyelitis caused by deep tissue infections is difficult to cure through phototherapy due to the poor penetration depth of the light. Herein, Cu/C/Fe3O4-COOH nanorod composites (Cu/C/Fe3O4-COOH) with nanoscale tip convex structures are successfully fabricated as a microwave-responsive smart bacteria-capture-killing vector. Cu/C/Fe3O4-COOH exhibited excellent magnetic targeting and bacteria-capturing ability due to its magnetism and high selectivity affinity to the amino groups on the surface of Staphylococcus aureus (S. aureus). Under microwave irradiation, Cu/C/Fe3O4-COOH efficiently treated S. aureus-infected osteomyelitis through the synergistic effects of microwave thermal therapy, microwave dynamic therapy, and copper ion therapy. It is calculated the electric field intensity in various regions of Cu/C/Fe3O4-COOH under microwave irradiation, demonstrating that it obtained the highest electric field intensity on the surface of copper nanoparticles of Cu/C/Fe3O4-COOH due to its high-curvature tips and metallic properties. This led to copper nanoparticles attracted more charged particles compared with other areas in Cu/C/Fe3O4-COOH. These charges are easier to escape from the high curvature surface of Cu/C/Fe3O4-COOH, and captured by adsorbed oxygen, resulting in the generation of reactive oxygen species. The Cu/C/Fe3O4-COOH designed in this study is expected to provide insight into the treatment of deep tissue infections under the irradiation of microwave.

Nanoparticle-Based Drug Delivery Systems for Enhancing Bone Regeneration

The treatment of bone defects has been a long-standing challenge in clinical practice. Among the various bone tissue engineering approaches, there has been substantial progress in the development of drug delivery systems based on functional drugs and appropriate carrier materials owing to technological advances in recent years. A large number of materials based on functional nanocarriers have been developed and applied to improve the complex osteogenic microenvironment, including for promoting osteogenic activity, inhibiting osteoclast activity, and exerting certain antibacterial effects. This Review discusses the physicochemical properties, drug loading mechanisms, advantages and disadvantages of nanoparticles (NPs) used for constructing drug delivery systems. In addition, we provide an overview of the osteogenic microenvironment regulation mechanism of drug delivery systems based on nanoparticle (NP) carriers and the construction strategies of drug delivery systems. Finally, the advantages and disadvantages of NP carriers are summarized along with their prospects and future research trends in bone tissue engineering. This Review thus provides advanced strategies for the design and application of drug delivery systems based on NPs in the treatment of bone defects.

Carboxymethyl chitosan-N-alkylimine derivatives: Synthesis, characterization and use for preservation of symbiotic biofertilizer bacteria on chickpea seeds

A series of carboxymethyl chitosan-N-alkylimine derivatives with side chain length of 4 to 10 carbons (CMCS-n, n = 4, 6, 8, 10) was prepared in a one-step solvent-free synthesis using Schiff base chemistry. The modified polysaccharides were characterized by their spectral, thermal and physical properties. The prepared polymers demonstrated an ability to spontaneous self-assembly with a clear correlation between critical aggregation concentration and the chain length of the alkyl substituent. N-alkylimine-CMCS derivatives were found to deliver hydrophobic (curcumin) and hydrophilic (ascorbic acid) active agents in unfavorable environments of water and oil, respectively. Then, N-alkylimine-CMCS derivatives were used as a platform for the delivery of symbiotic gram-positive bacteria Bacillus subtilis CJ onto chickpea seeds. These bacteria demonstrated a significantly higher survival rate (106 CFU/mL) in dried CMCS-6 derivative film than in other films tested. The seeds treated with N-alkylimine-CMCS coatings that contained B. subtilis CJ demonstrated up to 100-fold increase of this bacterial population on the seedlings in comparison to the pristine CMCS.

Incorporating mesoporous SiO2-HA particles into chitosan/hydroxyapatite scaffolds: A comprehensive evaluation of bioactivity and biocompatibility

In this work, composite scaffolds with various composition ratios of chitosan (CS), hydroxyapatite (HA), and mesoporous SiO2 particles co-synthesized with hydroxyapatite (SiO2-HA) were fabricated via the freeze-drying method for bone tissue engineering applications. Morphological studies showed that adding mesoporous particles resulted in a structure with a more uniformly porous geometry, subsequently leading to reduced biodegradation rates and water absorption in the scaffolds. The bioactivity results showed the introduction of mesoporous particles notably enhanced the coverage of the scaffold surface with apatite films. Moreover, biocompatibility assessments using sarcoma osteogenic cell line (SAOS-2) highlighted mesoporous particles' positive impact on cell adhesion and growth. The fluorescence images showed spindle-shaped cells with a greater number and normal cell nuclei for the scaffolds containing mesoporous SiO2-HA particles. The MTT cytotoxicity results indicated that the scaffolds containing mesoporous particles showed approximately 25 % higher cell survival more than single chitosan-based ones. What is more, the mesoporous-containing scaffolds occurred to have the best alkaline phosphatase test (ALP) activity among all scaffolds. It is important to add that CS/HA/mesoporous SiO2-HA scaffolds including SAOS-2 cells showed no sign of either early or late apoptosis. These findings affirm the potential of CS/HA/mesoporous SiO2-HA scaffolds as promising implants for bone tissue engineering.

Chitosan as a promising materials for the construction of nanocarriers for diabetic retinopathy: an updated review

Diabetic retinopathy (DR) is a condition that causes swelling of the blood vessels of the retina and leaks blood and fluids. It is the most severe form of diabetic eye disease. It causes vision loss in its advanced stage. Diabetic retinopathy is responsible for causing 26% of blindness. Very insufficient therapies are accessible for the treatment of DR. As compared to the conventional therapies, there should be enhanced research on the controlled release, shorter duration, and cost-effective therapy of diabetic retinopathy. The expansion of advanced nanocarriers-based drug delivery systems has been now employed to exploit as well as regulate the transport of many therapeutic agents to target sites via the increase in penetration or the extension of the duration of contact employing production by enclosing as well as distributing tiny molecules in nanostructured formulation. Various polymers have been utilized for the manufacturing of these nanostructured formulations. Chitosan possesses incredible biological and chemical properties, that have led to its extensive use in pharmaceutical and biomedical applications. Chitosan has been used in many studies because of its enhanced mucoadhesiveness and non-toxicity. Multiple studies have used chitosan as the best candidate for manufacturing nanocarriers and treating diabetic retinopathy. Numerous nanocarriers have been formulated by using chitosan such as nanostructured lipid carriers, solid lipid nanoparticles, liposomes, and dendrimers for treating diabetic retinopathy. This current review elaborates on the recent advancements of chitosan as a promising approach for the manufacturing of nanocarriers that can be used for treating diabetic retinopathy.

Effect of zinc oxide micro- and nanoparticles on cytotoxicity, antimicrobial activity and mechanical properties of apatite-polymer osteoplastic material

This work is devoted to the comparison of the physical and biological properties of synthesized osteoplastic composites with an experimentally determined content (375 μg/g) of the micro (ZnOMPs) and nano (ZnONPs) particles, immobilized in Hydroxyapatite-Alginate-Chitosan matrix (HA-Alg-CS). ZnONPs show pronounced antimicrobial activity against E.coli ATCC 25922 and S. aureus ATCC 25923, while ZnOMPs only in the CS presence. Composites containing ZnONPs/MPs do not have a toxic effect on bone-forming cells - osteoblasts, preserving their ability to biomineralization. ZnOMPs and ZnONPs to varying degrees, but significantly affect composites' swelling, porosity, shape stability, and prolong vitamin D3 release for 120h, compared to Control. Composites do not demonstrate unwanted "burst release." ZnONPs/MPs increase Youngs' modulus of the HA-Alg matrix, namely 348 → 419 MPa (ZnOMPs), 348 → 646 MPa (ZnONPs), and weaken the plastic (irreversible) deformations. The compressive strength of HA-Alg and HA-Alg/CS matrixes containing ZnONPs (178 MPa and 251 MPa, respectively) is in the range of values for native cortical bone (170-193 MPa). Biocompatibility and lack of toxic effect give both composites a perspective for osteoplastic application, but composites doped with ZnONPs are more attractive.

Chitosan and hyaluronic acid-based nanocarriers for advanced cancer therapy and intervention

Cancer has become a major public health issue leading to one of the foremost causes of morbidity and death in the world. Despite the current advances in diagnosis using modern technologies and treatment via surgery or chemo- and radio-therapies, severe side effects or after-effects limit the application of these treatment modalities. Novel drug delivery systems have shown the potential to deliver chemotherapeutics directly to cancer cells, thus minimizing unnecessary exposure to healthy cells. Concurrently, to circumvent difficulties associated with conventional deliveries of cancer therapeutics, natural polysaccharides have gained attention for the fabrication of such deliveries owing to biocompatibility, low toxicity, and biodegradability. It has been exhibited that natural polysaccharides can deliver high therapeutic concentrations of the entrapped drug to the target cells by sustained and targeted release. Considering the immense potential of natural polymers, the present work focuses on naturally generated biopolymer carriers based on chitosan and hyaluronic acid. This review delineated on the role of chitosan and its derivation from renewable resources as a biocompatible, biodegradable, nonimmunogenic material with notable antitumor activity as a drug delivery carrier in oncotherapy. Moreover, hyaluronic acid, itself by its structure or when linked with other molecules contributes to developing promising pharmaceutical delivery systems to setback the restrictions related to conventional cancer treatment.

Biomaterials for Drug Delivery and Human Applications

Biomaterials embody a groundbreaking paradigm shift in the field of drug delivery and human applications. Their versatility and adaptability have not only enriched therapeutic outcomes but also significantly reduced the burden of adverse effects. This work serves as a comprehensive overview of biomaterials, with a particular emphasis on their pivotal role in drug delivery, classifying them in terms of their biobased, biodegradable, and biocompatible nature, and highlighting their characteristics and advantages. The examination also delves into the extensive array of applications for biomaterials in drug delivery, encompassing diverse medical fields such as cancer therapy, cardiovascular diseases, neurological disorders, and vaccination. This work also explores the actual challenges within this domain, including potential toxicity and the complexity of manufacturing processes. These challenges emphasize the necessity for thorough research and the continuous development of regulatory frameworks. The second aim of this review is to navigate through the compelling terrain of recent advances and prospects in biomaterials, envisioning a healthcare landscape where they empower precise, targeted, and personalized drug delivery. The potential for biomaterials to transform healthcare is staggering, as they promise treatments tailored to individual patient needs, offering hope for improved therapeutic efficacy, fewer side effects, and a brighter future for medical practice.

An antibacterial nanoclay- and chitosan-based quad composite with controlled drug release for infected skin wound healing

Microbial infections of surgical sites and other wounds represent a major impediment for patients. Multifunctional low-cost dressings promoting tissue reparation while preventing infections are of great interest to medical professionals. Here, clay-based laponite nanodiscs (LAP) were loaded with the antibacterial drug kanamycin (KANA) before being embedded into a poly(lactic-co-glycolic acid) (PLGA) membrane and coated with the biopolymer chitosan (CS). Results indicated that these biocompatible materials combined the excellent capacity of LAP for controlled drug release with the mechanical robustness of PLGA and the antibacterial properties of CS as well as its hydrophilicity to form a composite highly suitable as an infection-preventing wound dressing. In vitro, PLGA/LAP/KANA/CS released drugs in a sustainable manner over 30 d, completely inhibited the growth of infectious bacteria, prompted the adhesion fibroblasts, and accelerated their proliferation 1.3 times. In vivo, the composite enabled the fast healing of infected full-thickness skin wounds with a 96.19 % contraction after 14 d. During the healing process, PLGA/LAP/KANA/CS stimulated re-epithelization, reduced inflammation, and promoted both angiogenesis and the formation of dense collagen fibers with an excellent final collagen volume ratio of 89.27 %. Thus, multifunctional PLGA/LAP/KANA/CS made of low-cost components demonstrated its potential for the treatment of infected skin wounds.

An injectable carboxymethyl chitosan hydrogel scaffold formed via coordination bond for antibacterial and osteogenesis in osteomyelitis

The intricate, hostile, and diverse nature of osteomyelitis (OM) poses a challenge for complete bacterial eradication and osteogenesis promotion via conventional treatment. Recently, functional hydrogels exhibiting antibacterial and osteogenic properties emerge as a promising avenue for OM wound healing in clinical practice. However, the preparation procedures and associated costs on cytokine and cell therapies for certain functional hydrogels can be complex and prohibitively expensive. In our research, a hybrid hydrogel dressing has been formulated utilizing carboxymethyl chitosan (CMCS) as the base material, and designed with inherent antibacterial, adhesion, proliferation, and differentiation characteristics, showing promise as a candidate for eradicating infection and promoting bone regeneration. The hybrid hydrogel is composed of interconnected networks of Fe3+-induced self-assembled CMCS and the antibacterial drug ciprofloxacin (CIP), resulting in excellent injectability and moldability. Notably, the CMCS/Fe3+/CIP hybrid hydrogel is capable of regulating antibacterial responses and stimulating osteogenesis in infected microenvironments without additional additives. This injectable antibacterial and osteogenic-promoting hydrogel establish a high-potential platform for low-cost, safe and effective treatment of OM by expediting the initial stages of infected bone wound repair.

Injectable Self-Harden Antibiofilm Bioceramic Cement for Minimally Invasive Surgery

There is an urgent demand for antibacterial bone grafts in clinics. Worryingly, the misuse and overuse of antibiotics accelerate the emergence of drug-resistant bacteria. Therefore, this study prepared a novel injectable bioceramic cement without antibiotics (FS-BCS), which showed good antibacterial properties by loading iron and strontium onto a matrix composed of brushite and calcium sulfate. The setting time, injectability, microstructure, antibacterial properties, anti-biofilm properties, and cytocompatibility of the novel bioceramic cement were evaluated thoroughly. The results showed that the material was highly injectable and antiwashout. The antibacterial tests revealed that FS-BCS inhibited the growth of 99.9% E. coli and S. aureus separately in the broth due to the synergistic effect of strontium and iron. Simultaneously, crystal violet and fluorescent staining tests revealed that the material could significantly inhibit the formation of E. coli and S. aureus biofilms. In addition, the co-incorporation of iron and strontium promoted the proliferation and migration of osteoblasts. Therefore, FS-BCS has good application potential in antibiotic-free anti-infection bone grafting using minimally invasive surgery.

pH-sensitive biosystem based on laponite RD/chitosan/polyvinyl alcohol hydrogels for controlled delivery of curcumin to breast cancer cells

In this study, a pH-responsive hydrogels based on laponite rapid dispersion (Lap®)/chitosan (CS)/polyvinyl alcohol (PVA) designed and was used for controlled delivery of the anticancer drug curcumin (CUR). First, it was accomplished by dissolving CUR in Lap® dispersion under the influence of the pH of the environment. Then, in the presence of Lap®CUR cross-linking was incorporated between CS and PVA polymers. The structural features of Lap®CUR/CS@PVA hydrogels are characterized using FT-IR, XRD, SEM/EDS, TEM, TGA, Zeta potential, and XPS. The in vitro drug release profiles confirmed a pH-responsive controlled release of CUR in acidic pH for all hydrogels. During 12 h, the cumulative release of CUR from Lap®CUR/0.1CS@PVA hydrogel was 27.9% and 12.3%, at pH 5.5 and 7.4, respectively. While during three days the release rate reached 48.5% and 18.5%. The CUR release kinetic from hydrogels also suggests that the kinetic data well fitted to the Korsmeyer-Peppas, diffusion-controlled and Fickian diffusion. Furthermore, in vitro cytotoxicity and DAPI staining study clearly illustrated that Lap®CUR/0.1CS@PVA hydrogel had lower cytotoxicity than CUR against MDA-MB 231 cancer cells, which confirmed the controlled release of drug through hydrogels. Meanwhile, in vitro hemolysis, antioxidant and antibacterial tests revealed that the prepared hydrogels have good blood compatibility, excellent antioxidant properties, and antibacterial activity. Based on the obtained results, the designed hydrogels could be potentially applied as pH-controlled drug delivery systems for cancer therapy.

TEMPO-oxidized nanofibrillated cellulose as potential carrier for sustained antibacterial delivery

Designing a suitable, cost-effective nanocarrier with an ability to capture and deliver antibiotics for restricting microbial spread remains an unmet need. A simple two-stepped strategy involving citric acid-induced hydrolysis of cellulose pulp (NFC) followed by TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical) mediated oxidation to obtain carboxylated nano fibrillated cellulose (TNFC-5) with high carboxyl content (1.12 mmol/g) has been explored. TNFC-5 so obtained was able to capture remarkable extent of antibiotics (drug loading (DL) > 40 % and entrapment efficiency (EE) >80 %) irrespective of their hydrophilicity as in, triclosan (hydrophobic) and ampicillin sodium (hydrophilic). In silico molecular docking study revealed the excess carboxyl content in nanocellulose imparted the strongest binding affinity to antibiotics via H-bonding. A slower and sustained release of triclosan was observed for TNFC-5 than that of NFC, reiterating the enhanced binding efficiency of the drugs with TNFC-5. Well-dispersed triclosan loaded TNFC-5 displayed sustained antibacterial activity against Escherichia coli and Staphylococcus aureus up to one week. Thus, TNFC-5 has been demonstrated as a green, cheap, and eco-friendly alternative to the other biodegradable nanocarriers for carrying antibiotics with high DL and EE, thereby reducing the wastage of expensive drugs while ensuring a sustained antibacterial effect. Our study established that the drug loaded nanofibers (TNFC-5) might act as a promising candidate to penetrate through biofilm for treating serious bacterial infections by retarding their growth and eventually eradicating bacterial colonies.

Preparation and characterization of pH-sensitive chitosan/starch/MoS2 nanocomposite for control release of curcumin macromolecules drug delivery; application in the breast cancer treatment

In this work, chitosan (CS), Starch (S), and Molybdenum Disulfide (MoS2) were combined to create a nanocarrier that was utilized to treat breast cancer using the MCF-7 cell line. To analyze the features of the nanocarrier, Fourier-transform infrared spectroscopy (FTIR) and X-Ray diffraction (XRD) tests were performed, respectively, to discover physical interactions and chemical bonding. Field emission scanning electron microscopy (FE-SEM), Dynamic light scattering (DLS), and zeta potential analyses were performed and reported to determine the structural characteristics and morphology of nanoparticles, size distribution, and surface charge of nanocarriers, respectively. The average size of the nanocomposite was measured at around 279 nm, and the surface charge of the nanocarrier was determined to be +86.31 mV. The entrapment and drug loading efficiency of nanocarriers were 87.25 % and 46.5 %, respectively, which is an acceptable value. The kinetics and release mode of the drug were investigated, and it was found that the synthesized nanocarrier was sensitive to pH and that its release was stable. The amount of the nanocarriers' toxicity and cell death were evaluated using MTT tests and flow cytometry, respectively. In the present study, the nanocarrier was wholly nontoxic and had anticancer properties against the MCF-7 cell line. This nanocarrier is very important due to its non-toxicity and sensitivity to pH and can be used in drug delivery and medical applications.

3D and 4D printing hydroxyapatite-based scaffolds for bone tissue engineering and regeneration

The osseous tissue can be classified as a nanocomposite that encompasses a complex interweaving of organic and inorganic matrices. This intricate amalgamation consists of a collagen component and a mineral phase that are intricately arranged to form elaborate and perforated configurations. Hydroxyapatite, whether synthesized artificially or obtained from natural sources, has garnered considerable attention as a composite material in the field of bone tissue engineering due to its striking resemblance to bone in terms of structure and characteristics. Hydroxyapatite (HA) constitutes the predominant ceramic biomaterial for biomedical applications due to its ability to replicate the mineral composition of vertebrate bone. Nonetheless, it is noteworthy that the present biomimetic substance exhibits unfavorable mechanical characteristics, characterized by insufficient tensile and compressive strength, thus rendering it unsuitable for effective employment in the field of bone tissue engineering. Due to its beneficial attributes, hydroxyapatite (HA) is frequently employed in conjunction with various polymers and crosslinkers as composites to enhance mechanical properties and overall efficacy of implantable biomaterials engineered. The restoration of skeletal defects through the use of customized replacements is an effective way to replace damaged or lost bone structures. This method not only restores the bones' original functions but also reinstates their initial aesthetic appearance. The utilization of hydroxyapatite-polymer composites within 3D-printed grafts necessitates meticulous optimization of both mechanical and biological properties, in order to ensure their suitability for employment in medical devices. The utilization of 3D-printing technology represents an innovative approach in the manufacturing of HA-based scaffolds, which offers advantageous prospects for personalized bone regeneration. The expeditious prototyping method, with emphasis on the application of 3D printing, presents a viable approach in the development of bespoke prosthetic implants, grounded on healthcare data sets. 4D printing approach is an evolved form of 3D printing that utilizes programmable materials capable of altering the intended shape of printed structures, contingent upon single or dual stimulating factors. These factors include aspects such as pH level, temperature, humidity, crosslinking degree, and leaching factors.

Recent advances in cellulose, pectin, carrageenan and alginate-based oral drug delivery systems

Polymers-based drug delivery systems constitute one of the highly explored thrust areas in the field of the medicinal and pharmaceutical industries. In the past years, the properties of polymers have been modified in context to their solubility, release kinetics, targeted action site, absorption, and therapeutic efficacy. Despite the availability of diverse synthetic polymers for the bioavailability enhancement of drugs, the use of natural polymers is still highly recommended due to their easy availability, accessibility, and non-toxicity. The aim of the review is to provide the available literature of the last five years on oral drug delivery systems based on four natural polymers i.e., cellulose, pectin, carrageenan, and alginate in a concise and tabulated manner. In this review, most of the information is in tabulated form to provide easy accessibility to the reader. The data related to active pharmaceutical ingredients and supported components in different formulations of the mentioned polymers have been made available.

Manufacturing methods, properties, and potential applications in bone tissue regeneration of hydroxyapatite-chitosan biocomposites: A review

Hydroxyapatite (HA) and chitosan (CS) biopolymer are the major materials investigated for biomedical purposes. Both of these components play an important role in the orthopedic field as bone substitutes or drug release systems. Used separately, the hydroxyapatite is quite fragile, while CS mechanical strength is very weak. Therefore, a combination of HA and CS polymer is used, which provides excellent mechanical performance with high biocompatibility and biomimetic capacity. Moreover, the porous structure and reactivity of the hydroxyapatite-chitosan (HA-CS) composite allow their application not only as a bone repair but also as a drug delivery system providing controlled drug release directly to the bone site. These features make biomimetic HA-CS composite a subject of interest for many researchers. Through this review, we provide the important recent achievements in the development of HA-CS composites, focusing on manufacturing techniques, conventional and novel three-dimensional bioprinting technology, and physicochemical and biological properties. The drug delivery properties and the most relevant biomedical applications of the HA-CS composite scaffolds are also presented. Finally, alternative approaches are proposed to develop HA composites with the aim to improve their physicochemical, mechanical, and biological properties.

Smart pH- and Temperature-Sensitive Micelles Based on Chitosan Grafted with Fatty Acids to Increase the Efficiency and Selectivity of Doxorubicin and Its Adjuvant Regarding the Tumor Cells

The main factors that determine the low effectiveness of chemotherapy are the low target bioavailability of antitumor drugs and the efflux process. In attempts to overcome this problem, several approaches are proposed here. Firstly, the development of polymeric micellar systems based on chitosan grafted by fatty acids (different types to optimize their properties), which, on the one hand, increase the solubility and bioavailability of cytostatics and, on the other hand, effectively interact with tumor cells due to the polycationic properties of chitosan, allowing for more effective penetration of cytostatic drugs into the cells. Secondly, the use of adjuvants-synergists of cytostatics (such as eugenol) included in the same micellar formulation-that selectively enhance the accumulation and retention of cytostatics in the tumor cells. pH- and temperature-sensitive polymeric micelles developed show high entrapment efficiency for both cytostatics and eugenol (EG) >60% and release the drug in a prolonged manner for 40 h in a weakly acidic medium corresponding to the microenvironment of tumors. In a slightly alkaline environment, the drug circulates longer (more than 60 h). The thermal sensitivity of micelles is realized due to an increase in the molecular mobility of chitosan, which undergoes a phase transition at 32-37 °C. The effect of the cytostatic drug doxorubicin (Dox) on cancerous A549 cells and model healthy cells of human embryonic renal epithelium (HEK293T) was studied by FTIR spectroscopy and fluorescence microscopy. Micellar Dox penetrates into cancer cells 2-3 times more efficiently when using EG adjuvant, which inhibits efflux, as demonstrated by a significant increase in the ratio of intra- and extracellular concentrations of the cytostatic. However, here it is worth remembering about healthy cells that they should not be damaged: according to changes in the FTIR and fluorescence spectra, the penetration of Dox into HEK293T when using micelles in combination with EG is reduced by 20-30% compared to a simple cytostatic. Thus, experimental developments of combined micellar cytostatic drugs have been proposed to increase the effectiveness of cancer treatment and overcome multiple drug resistance.

Anti-COVID-19 Credentials of Chitosan Composites and Derivatives: Future Scope?

Chitosan derivatives and composites are the next generation polymers for biomedical applications. With their humble origins from the second most abundant naturally available polymer chitin, chitosan is currently one of the most promising polymer systems, with wide biological applications. This current review gives a bird's eye view of the antimicrobial applications of chitosan composites and derivatives. The antiviral activity and the mechanisms behind the inhibitory activity of these components have been reviewed. Specifically, the anti-COVID-19 aspects of chitosan composites and their derivatives have been compiled from the existing scattered reports and presented. Defeating COVID-19 is the battle of this century, and the chitosan derivative-based combat strategies naturally become very attractive. The challenges ahead and future recommendations have been addressed.

Dual-stimuli responsive skin-core structural fibers with an in situ crosslinked alginate ester for hydrophobic drug delivery

To solve the problems of low bioavailability and low intestinal release efficiency of curcumin as a hydrophobic drug in the treatment of diabetes, a novel alginate ester/Antarctic krill protein/2-formylphenylboronic acid (AE/AKP/2-FPBA) skin-core structural fiber with pH and glucose stimulation responsiveness was prepared by an acid-catalyzed polyol in situ crosslinked phase separation method as a drug delivery system. The reaction mechanism and apparent morphology of the fiber were studied. The controlled release ability of the fiber in simulated liquids was evaluated. AE targeted the release of curcumin by pH stimulation; the release amount in the simulated colonic fluid reached 100%, while the release amount in the simulated digestive fluid was less than 12%. 2-FPBA controlled the release rate of curcumin by glucose stimulation, which increases with the increase of 2-FPBA content. Moreover, the cytotoxicity test confirmed that the skin-core structural fiber was non-toxic. These results suggest that skin-core structural fibers have great potential as curcumin delivery systems.

A Novel Electrochemical Sensor Based on an Environmentally Friendly Synthesis of Magnetic Chitosan Nanocomposite Carbon Paste Electrode for the Determination of Diclofenac to Control Inflammation

A simple and eco-friendly electrochemical sensor for the anti-inflammatory diclofenac (DIC) was developed in a chitosan nanocomposite carbon paste electrode (M-Chs NC/CPE). The M-Chs NC/CPE was characterized with FTIR, XRD, SEM, and TEM for the size, surface area, and morphology. The produced electrode showed a high electrocatalytic activity to use the DIC in 0.1 M of the BR buffer (pH 3.0). The effect of scanning speed and pH on the DIC oxidation peak suggests that the DIC electrode process has a typical diffusion characteristic with two electrons and two protons. Furthermore, the peak current linearly proportional to the DIC concentration ranged from 0.025 M to 4.0 M with the correlation coefficient (r2). The sensitivity, limit of detection (LOD; 3σ), and the limit of quantification (LOQ; 10σ) were 0.993, 9.6 µA/µM cm², 0.007 µM, and 0.024 µM, respectively. In the end, the proposed sensor enables the reliable and sensitive detection of DIC in biological and pharmaceutical samples.

Recent Advances in Chitosan-Based Applications-A Review

Chitosan derived from chitin gas gathered much interest as a biopolymer due to its known and possible broad applications. Chitin is a nitrogen-enriched polymer abundantly present in the exoskeletons of arthropods, cell walls of fungi, green algae, and microorganisms, radulae and beaks of molluscs and cephalopods, etc. Chitosan is a promising candidate for a wide variety of applications due to its macromolecular structure and its unique biological and physiological properties, including solubility, biocompatibility, biodegradability, and reactivity. Chitosan and its derivatives have been known to be applicable in medicine, pharmaceuticals, food, cosmetics, agriculture, the textile and paper industries, the energy industry, and industrial sustainability. More specifically, their use in drug delivery, dentistry, ophthalmology, wound dressing, cell encapsulation, bioimaging, tissue engineering, food packaging, gelling and coating, food additives and preservatives, active biopolymeric nanofilms, nutraceuticals, skin and hair care, preventing abiotic stress in flora, increasing water availability in plants, controlled release fertilizers, dye-sensitised solar cells, wastewater and sludge treatment, and metal extraction. The merits and demerits associated with the use of chitosan derivatives in the above applications are elucidated, and finally, the key challenges and future perspectives are discussed in detail.

Applications of chitosan-based biomaterials: From preparation to spinal cord injury neuroprosthetic treatment

Spinal cord injury (SCI)-related disabilities are a serious problem in the modern society. Further, the treatment of SCI is highly challenging and is urgently required in clinical practice. Research on nerve tissue engineering is an emerging approach for improving the treatment outcomes of SCI. Chitosan (CS) is a cationic polysaccharide derived from natural biomaterials. Chitosan has been found to exhibit excellent biological properties, such as nontoxicity, biocompatibility, biodegradation, and antibacterial activity. Recently, chitosan-based biomaterials have attracted significant attention for SCI repair in nerve tissue engineering applications. These studies revealed that chitosan-based biomaterials have various functions and mechanisms to promote SCI repair, such as promoting neural cell growth, guiding nerve tissue regeneration, delivering nerve growth factors, and as a vector for gene therapy. Chitosan-based biomaterials have proven to have excellent potential for the treatment of SCI. This review aims to introduce the recent advances in chitosan-based biomaterials for SCI treatment and to highlight the prospects for further application.

Chitosan or Cyclodextrin Grafted with Oleic Acid Self-Assemble into Stabilized Polymeric Micelles with Potential of Drug Carriers

Polymeric micelles combining the advantages of biocompatible poly- and oligosaccharides with classical micellar amphiphilic systems represent a promising class of drug carriers. In this work, micelles based on chitosan (or cyclodextrin) and oleic acid with various modification degrees were synthesized-the most optimal grafting degree is 15-30% in terms of CMC. According to NTA data, micelles have a hydrodynamic diameter of the main fraction of 60-100 nm. The inclusion of the antibacterial agents: moxifloxacin or rifampicin in micelles was studied by FTIR spectroscopy and fluorescence spectroscopy using a pyrene label (using monomer-excimer approach). When aromatic molecules are incorporated into micelles, the absorption bands of C-H bonds of the fatty tails of micelles shift towards smaller wavenumbers, indicating a stabilization of the micelles structure, and the microenvironment of the drug molecule changes according to the low frequencies shift and intensity changes in oscillation frequencies of 1450 cm^-1 corresponding to aromatic fragment. Loading of moxifloxacin and rifampicin into micelles leads to a change in the fluorescent properties: a shift of the maximum of fluorescence emission to the long-wavelength region and an increase in the fluorescence anisotropy due to a drastic increase in the hydrodynamic volume of the fluorophore-containing rotating fragment. Using the pyrene label, the critical micelle concentrations were determined: from 4 to 30 nM depending on the polymer composition. Micellar systems enhance the effect of the antibiotic by increasing the penetration into bacterial cells and storing the drug in a protective coat. As a part of the supramolecular structure, the antibiotic remains active for more than four days, while in free form, the activity decreases after two days. In pharmacokinetic experiments, in vivo moxifloxacin in micellar systems show 1.7 times more efficiency compared to free form; moreover, two times higher maximal concentration in the blood is achieved. The advantage of polymer micellar systems in comparison with simple cyclodextrins and chitosan, which do not so significantly contribute to the antibacterial and pharmacokinetic parameters, was shown. Thus, polymeric micelles are one of the key approaches to improving the effectiveness of antibacterial drugs and solving the problems of resistant bacterial infections and multidrug resistance.

Current research progress of local drug delivery systems based on biodegradable polymers in treating chronic osteomyelitis

Chronic osteomyelitis is one of the most challenging diseases in orthopedic treatment. It is usually treated with intravenous antibiotics and debridement in clinical practice, which also brings systemic drug side effects and bone defects. The local drug delivery system of antibiotics has the characteristics of targeted slow release to the lesion site, replacing systemic antibiotics and reducing the toxic and side effects of drugs. It can also increase the local drug concentration, achieve sound bacteriostatic effects, and promote bone healing and formation. Currently, PMMA beads are used in treating chronic osteomyelitis at home and abroad, but the chain beads need to be removed after a second operation, inconveniences patients. Biodegradable materials have been extensively studied as optimal options for antibiotic encapsulation and delivery, bringing new hope for treating chronic osteomyelitis. This article reviews the research progress of local drug delivery systems based on biodegradable polymers, including natural and synthetic ones, in treating chronic osteomyelitis.

In Vivo Evaluation of the Anti-Schistosomal Potential of Ginger-Loaded Chitosan Nanoparticles on Schistosoma mansoni: Histopathological, Ultrastructural, and Immunological Changes

Chemotherapy is the most widely advocated method of Schistosome control. However, repeated chemotherapy leads to the emergence of drug-resistant Schistosoma strains. Therefore, efforts to find alternative drugs, especially those of natural origin, have risen globally. Nanoparticles (NPs) have received special interest as efficient drug delivery systems. This work aimed to investigate the anti-schistosomal potential of Zingiber officinale (ginger, Zingiberaceae)-loaded chitosan nanoparticles (GCsNPs) on Schistosoma mansoni experimentally infected mice that were exposed to 80 ± 10 cercariae/mouse. The study groups are: (G1) negative control; (G2) positive control; (G3) praziquantel in a dose of 500 mg/kg/day for two consecutive days; (G4) ginger in a dose of 500 mg/kg treated; (G5) chitosan nanoparticles in a dose 3 mg/kg (G6) GCsNPs in a dose 250 mg/kg; and (G7) GCsNPs in a dose 500 mg/kg. The anti-schistosome potential was assessed using histopathological scanning electron microscopically and immunological parameters. The results showed that there was a significant decrease in cellular granuloma count (p < 0.05) and granuloma diameter (p < 0.001) in all infected treated mice groups, in comparison to the infected non-treated group with the highest reduction in both G3 and G7. SEM of S. mansoni adult worm recovered from G3 showed mild edema of oral and ventral suckers with some peeling and blebs around them, while that recovered from G7 showed abnormal oedematous oral and retracted ventral sucker, edema of the tegument, rupture of many tubercles with vacuolation and complete loss of spines. All infected treated mice groups, in comparison to positive control G2, showed a significant reduction in IL-4, IL-10, and TNF-α levels (p-value < 0.001), especially groups G6 and G7 (p-value < 0.05); both G6 and G7 values were nearer to the normal that indicated recovery of the liver tissue.

Mannosylated Polymeric Ligands for Targeted Delivery of Antibacterials and Their Adjuvants to Macrophages for the Enhancement of the Drug Efficiency

Bacterial infections and especially resistant strains of pathogens localized in macrophages and granulomas are intractable diseases that pose a threat to millions of people. In this paper, the theoretical and experimental foundations for solving this problem are proposed due to two key aspects. The first is the use of a three-component polymer system for delivering fluoroquinolones to macrophages due to high-affinity interaction with mannose receptors (CD206). Cytometry assay determined that 95.5% macrophage-like cells were FITC-positive after adding high-affine to CD206 trimannoside conjugate HPCD-PEI1.8-triMan, and 61.7% were FITC-positive after adding medium-affine ligand with linear mannose label HPCD-PEI1.8-Man. The second aspect is the use of adjuvants, which are synergists for antibiotics. Using FTIR and NMR spectroscopy, it was shown that molecular containers, namely mannosylated polyethyleneimines (PEIs) and cyclodextrins (CDs), load moxifloxacin (MF) with dissociation constants of the order of 10-4-10-6 M; moreover, due to prolonged release and adsorption on the cell membrane, they enhance the effect of MF. Using CLSM, it was shown that eugenol (EG) increases the penetration of doxorubicin (Dox) into cells by an order of magnitude due to the creation of defects in the bacterial wall and the inhibition of efflux proteins. Fluorescence spectroscopy showed that 0.5% EG penetrates into bacteria and inhibits efflux proteins, which makes it possible to increase the maximum concentration of the antibiotic by 60% and maintain it for several hours until the pathogens are completely neutralized. Regulation of efflux is a possible way to overcome multiple drug resistance of both pathogens and cancer cells.

Preparation and characterization of vaccarin, hypaphorine and chitosan nanoparticles and their promoting effects on chronic wounds healing

Chronic wounds have become an important factor hindering human health, affecting tens of millions of people worldwide, especially diabetic wounds. Based on the antibacterial properties of chitosan, the angiogenesis promoting effect of vaccarin (VAC) and the anti-inflammatory effect of hypaphorine (HYP), nanoparticles with high bioavailability were prepared. VAC, HYP and chitosan nanoparticles (VAC + HYP-NPS) were used to the treatment of chronic wounds. Transmission electron microscopy (TEM) images showed the nanoparticles were spherical. ZetaPALS showed the potential of nanoparticles were -12.8 ± 5.53 mV and the size were 166.8 ± 29.95 nm. Methyl thiazolyl tetrazolium (MTT) assay showed that VAC + HYP-NPS had no toxicity and the biocompatibility was satisfactory. In the treatment of chronic wounds in diabetic rats, VAC + HYP-NPS significantly promoted the re-epithelialization of chronic wounds and accelerated the healing of chronic wounds. In the process of chronic wounds healing, VAC + HYP-NPS played the antibacterial effect of chitosan, the angiogenic effect of VAC and the anti-inflammatory effect of HYP, and finally promoted the chronic wounds healing. Overall, the developed VAC + HYP-NPS have potential application in chronic wounds healing. In view of the complexity of the causes of chronic wounds, multi-target drug administration may be an effective way to treat chronic wounds.

Titanium Surfaces Modified with Graphene Oxide/Gelatin Composite Coatings for Enhanced Antibacterial Properties and Biological Activities

Titanium alloys have been widely used in orthopedic implants due to their excellent physicochemical properties and good biocompatibility. However, in practice, titanium implants may fail to integrate or develop an implant-centered infection. Because of its excellent mechanical properties, bone integrability, biocompatibility, antibacterial properties, and so on, graphene oxide is increasingly being used in the preparation of composite biomaterials. The percutaneous titanium implants are used as the research object in this project. To solve the integration of implant and tissue, a graphene oxide/gelatin (GO/gel) composite coating was used to optimize the implant surface. Bacterial and cell experiments were used to investigate the antimicrobial activity, biocompatibility, and regulation of macrophage polarization of GO/gel-modified titanium. According to our findings, GO/gel-modified titanium has a good bacteriostatic effect against Staphylococcus aureus. On the modified surface, L929 cells proliferated well and showed no cytotoxicity. Simultaneously, the GO/gel-modified titanium surface could inhibit macrophage adhesion and spread in the early stage of culture and showed a more obvious inflammatory decline in the late stage of culture. These findings implied that GO/gel-modified titanium is advantageous for resistant bacteria and tissue remolding.