Adhesive and tough hydrogels promoted by quaternary chitosan for strain sensor

Highly stretchable, adhesive and conductive hydrogel for flexible and stable bioelectrocatalytic sensing layer of enzyme-based amperometric glucose biosensor

Highly stretchable, adhesive and conductive triblock hydrogel was synthesized and utilized as a flexible and stable bioelectrocatalytic sensing layer of enzyme-based amperometric glucose biosensor. The hydrogel was prepared through one-pot polymerization of 2-acrylamido-2-methyl-1-propanesulfonic acid, methacrylamide, and hydroxyethyl methacrylate. The physical and chemical properties of the hydrogel were characterized with X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and electrochemical techniques. Glucose oxidase (GOx) and chitosan (CTS) embedded hydrogel was drop-coated on glassy carbon electrode (GCE) and screen printed graphite electrode (SPGE). The resulting GOx/CTS/hydrogel-GCE and GOx/CTS/hydrogel-SPGE exhibited excellent mediated bioelectrocatalytic oxidation current for glucose. The calibration curve of glucose by the GOx/CTS/hydrogel-GCE showed the linear range from 0.25 to 15 mM with the sensitivity of 27.0 µA mM-1 cm-2. This GOx/CTS/hydrogel-based sensing layer coated on the SPGE was stable against bending, and the response to glucose was almost same irrespective of the bending angles (0, 30, 60, and 90 degree). In addition, the response to glucose was not interfered by various organic and inorganic interfering species, allowed to detect glucose in goat serum. Furthermore, the GOx/CTS/hydrogel-GCE kept its original activity of 99.64 % during 30 days' storage under dry state in refrigerator.

Dopamine-conjugated hyaluronic acid hydrogel interpenetrated by genipin crosslinked quaternary ammonium chitosan for potential biomedical adhesives applications

Multifunctional hydrogel adhesives have emerged as promising candidates for advanced biomedical applications, particularly in surgical suture alternatives, hemostatic management, and regenerative wound care. This study developed an interpenetrating polymer network (IPN) hydrogel adhesive system through the synergistic integration of dopamine-functionalized hyaluronic acid (HA-DA) and genipin-crosslinked quaternary ammonium chitosan (QCS). The successful preparation of HA-DA and QCS was confirmed via 1H nuclear magnetic resonance (1H NMR) and Fourier transform infrared (FT-IR) analysis. The fabricated hydrogel adhesives exhibited the interconnected microstructure, suitable mechanical strength, and elastic solid properties. Additionally, the hydrogel adhesives exhibited expected self-healing abilities and injectability. The hydrogels displayed strong adhesion on different matrix and tissues. The quaternary ammonium group pendants in the hydrogel network result in the excellent antibacterial activity of hydrogels against Escherichia coli and Staphylococcus aureus. Furthermore, hemolysis test, fluorescence images, CCK-8 assay, and wound scratch assay demonstrated that the hydrogel adhesives possessed good hemocompatibility, biocompatibility, and cell migration ability. These multifunctional characteristics, combining structural integrity, rapid self-repair, surgical-grade adhesion, antimicrobial protection, hemocompatibility, and cytocompatibility, establish this IPN hydrogel as a promising candidate for biomedical adhesives.

Hydrogel-Based Continuum Soft Robots

This paper comprehensively reviews the latest advances in hydrogel-based continuum soft robots. Hydrogels exhibit exceptional flexibility and adaptability compared to traditional robots reliant on rigid structures, making them ideal as biomimetic robotic skins and platforms for constructing highly accurate, real-time responsive sensory interfaces. The article systematically summarizes recent research developments across several key dimensions, including application domains, fabrication methods, actuator technologies, and sensing mechanisms. From an application perspective, developments span healthcare, manufacturing, and agriculture. Regarding fabrication techniques, the paper extensively explores crosslinking methods, additive manufacturing, microfluidics, and other related processes. Additionally, the article categorizes and thoroughly discusses various hydrogel-based actuators responsive to solute/solvent variations, pH, chemical reactions, temperature, light, magnetic fields, electric fields, hydraulic/electro-osmotic stimuli, and humidity. It also details the strategies for designing and implementing diverse sensors, including strain, pressure, humidity, conductive, magnetic, thermal, gas, optical, and multimodal sensors. Finally, the paper offers an in-depth discussion of the prospective applications of hydrogel-based continuum soft robots, particularly emphasizing their potential in medical and industrial fields. Concluding remarks include a forward-looking outlook highlighting future challenges and promising research directions.

A highly stretchable, self-healing, self-adhesive polyacrylic acid/chitosan multifunctional composite hydrogel for flexible strain sensors

Conductive hydrogels have emerged as excellent candidates for the design and construction of flexible wearable sensors and have attracted great attention in the field of wearable sensors. However, there are still serious challenges to integrating high stretchability, self-healing, self-adhesion, excellent sensing properties, and good biocompatibility into hydrogel wearable devices through easy and green strategies. In this paper, multifunctional conductive hydrogels (PCGB) with good biocompatibility, high tensile (1694 % strain), self-adhesive, and self-healing properties were fabricated by incorporating boric acid (BA) and glucose (Glu) simultaneously into polyacrylic acid (PAA) and chitosan (CS) polymer networks using a simple one-pot polymerization method. Furthermore, the hydrogel strain sensor constructed from the PCGB assembly had great sensing property including high sensitivity (GF = 5.7), durability and stability (5000 cycles). The hydrogel strain sensor was applied to the detection of human motion, which exhibited accurate detection behavior for both large-scale motions and small activities. A strategy to design and fabricate multifunctional conductive hydrogels integrating high stretchability, self-healing, self-adhesion and good biocompatibility was provided, and the multifunctional conductive hydrogels broadened the application of hydrogel-based wearable sensor.

An electrochemical sensor based on electrodeposited methylene blue on a carbon nanotube decorated hydrogel for the detection of ascorbic acid

In this study, a self-assembled electrochemical sensor was prepared by coating with a carbon nanotube (CNT) decorated hydrogel (HG) combined with electrodeposition of methylene blue (MB), and then used for the detection of ascorbic acid (AA). The three-dimensional network of HG has the advantages of large electroactive surface area, rapid diffusion and electron transfer rate, strong adhesive ability and stabilization of the polymerized MB. The MB provides high electrocatalytic activity and works as an electron transfer mediator to facilitate the oxidation of AA. The successful synthesis of the hydrogel and the preparation of the sensor are confirmed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The layer-by-layer assembly was identified by AFM with the heights of 22.1 nm and 186.8 nm for the hydrogel and MB layers, respectively. Under the optimal conditions, the sensor has a linear range of 0.1 mM to 10 mM and a detection limit of 0.05 mM. What's more, the prepared sensor also exhibits good stability (current retention of 91.22% after 100 cycles for testing 0.25 mM AA), excellent anti-interference ability, good reproducibility (RSD of 4.26% for five independent experiments), excellent operational stability (RSD of 1.66% for 30 consecutive AA additions), fast response time (<4 s) and shows satisfactory results in the detection of AA in vitamin C tablets.

Self-healing, piezoresistive and temperature responsive behaviour of chitosan/polyacrylic acid dynamic hydrogels

Flexible electronics have introduced new challenges for efficient human-machine interactions. Hydrogels have emerged as prominent materials for electronic wearable applications due to their exceptional mechanical deformability and lightweight characteristics combined in some cases with conductive properties, and softness. Additionally, bio-interphases require multisensory response to stress, strain, temperature, and self-healing capacity. To mimic these properties, this work developed interpenetrated hydrogel networks composed of chitosan (CHI) and polyacrylic acid (PAA), combined with Fe (III) ions and varying amounts of NMBA (0-0.25 %), to achieve tailored conductivity (0.8-2.5 mS/cm), self-healing, self-standing and mechanical properties (E = 11.7-110 Pa and fracture strain = 64.9-1923 %) suitable for strain sensor applications. The results revealed a significant influence of the restrictive effect on the mobility of uncrosslinked chain segments, caused by Fe ions and NMBA, on the piezoresistance (GF 2.1-1.3) and self-healing capability of the gels. Interestingly, a transparent/turbid transition, driven by microphase separation that is characteristic of systems with high dynamic interactions, was encountered for the first time in these hydrogels. This transition was analyzed in relation to external temperature, water content, pH, and the influence of Fe ions and NMBA. The simultaneous sensitivity of these materials to temperature and pH, along with their piezoresistive and self-healing behaviour, can be highly valuable for multifunctional sensors in a wide range of applications.

Fabrication of anti-freezing and self-healing hydrogel sensors based on carboxymethyl guar gum and poly(ionic liquid)

As classical soft materials, conductive hydrogels have attracted wide attention in the field of strain sensors due to their unique flexibility and conductivity. However, there are still challenges in developing conductive hydrogels with comprehensive mechanical strength, self-healing ability and sensitive sensing properties. In this paper, a novel PAV/CMGG hydrogel was prepared by a simple one-pot method through the introduction of 1-vinyl-3-butylimidazolium bromide (VBIMBr), acrylic acid (AA), carboxymethyl guar gum (CMGG) and AlCl3. The coordination bond between Al3+ and -COO- groups on PAA and CMGG, the hydrogen bond between PAA and CMGG, and the electrostatic interaction between [VBIM]+ and -COO- endow the hydrogel with good mechanical properties, self-recovery ability, fatigue resistance and great self-healing properties. PAV/CMGG hydrogel had good conductivity of 2.31 S/m which could successfully light up the bulb. The hydrogel as the strain sensor had not only a wide strain sensing capability (strain ranging from 0 to 800 %), but also a high strain sensitivity (gauge factor (GF) = 28.50 for the strain ranging from 600 to 800 %). This study can provide inspiration for the construction of new high-performance flexible sensors.

Applied research and recent advances in the development of flexible sensing hydrogels from cellulose: A review

Flexible wearable smart sensing materials have gained immense momentum, and biomass-based hydrogel sensors for renewable and biologically safe wearable sensors have attracted significant attention in order to meet the growing demand for sustainability and ecological friendliness. Cellulose has been widely used in the field of biomass-based hydrogel sensing materials, being the most abundant biomass material in nature. This review mainly focuses on the types of cellulose hydrogels, the preparation methods and their applications in smart flexible sensing materials. The structure-functional properties-application relationship of cellulose hydrogels and the applications of various cellulose hydrogels in flexible sensing are described in detail. Then it focuses on the methods and mechanisms of cellulose hydrogel flexible sensors preparation, and then summarizes the research of cellulose hydrogel sensors for different types of stimulus response mechanisms to pressure, pH, biomolecules, ions, temperature, humidity, and light. The applications of cellulose hydrogels as flexible sensing materials in biomedical sensing, smart wearable and environmental monitoring are further summarized. Finally, the future development trend of cellulose hydrogels is briefly introduced and the future development of cellulose hydrogel sensing materials is envisioned.

A Self-Healing and Sweat-Chargeable Hydrogel Electrolyte for All-in-One Flexible Supercapacitors

Flexible solid-state supercapacitors (SCs) with hydrogel as an electrolyte and separator combine the advantages of wearability and energy storage and exhibit a broad application prospect in wearable energy textiles. However, irreversible electrolyte damage and unstable electrode-electrolyte interfaces during mechanical deformations remain bottlenecks in realizing truly wearable applications. Herein, poly(acrylic acid) (PAA)-Fe hydrogels were prepared through a simple thermal polymerization strategy. The dynamic reversible metal coordination bonds between Fe3+ and carboxylic acids confers the hydrogels with excellent self-healing properties. As expected, the prepared hydrogels exhibited superior mechanical strength (tensile stress of 45.80 kPa), ionic conductivity (0.076 S cm-1), and self-healing properties. Subsequently, the SCs were constructed using composite hydrogel electrodes (MnO2@CC embedded in the PAA-Fe hydrogels) as symmetrical electrodes (marked as MSCs). The reversible metal coordination bonds between composite hydrogel electrodes formed an ultrastable electrode/electrolyte interface in the all-in-one MSCs, thus revealing excellent mechanical durability. The all-in-one MSCs delivered a remarkable specific capacitance (30.98 F g-1 at 0.2 A g-1), excellent cyclic stability (87.24% after 5000 cycles), outstanding mechanical deformation stability, and impressive electrochemical output stability after self-healing (capacitance retention of 85.34% after five cycles of cutting/self-healing). It is noteworthy that the all-in-one MSCs employed NaCl as an electrolyte, which can be obtained from human sweat. As a proof of the self-charged concept, the all-in-one MSCs can be reused in sweat, whose capacitance was maintained at 90.05% of the initial state after three repetitions. This work is expected to shine light into the design of all-in-one and fabric-based SCs and the development of wearable energy textiles.

A gelatin-based ionogel with anti-swelling properties for underwater human physiological signal detection

A hydrogel is an ideal matrix material for flexible electronic devices, electronic skin and health detection devices due to its outstanding flexibility and stretchability. However, hydrogel-based flexible electronic devices swell once they are placed in a high humidity or underwater environment. The swelling behavior could damage the internal structure of hydrogels, ultimately leading to the reduction or complete loss of mechanical properties, electrical conductivity and sensing function. In order to resolve the above problems, a double network ionogel with remarkable anti-swelling behavior, stretchability and conductive properties was prepared. The ionogel consisted of gelatin (G) and copolymerization of acrylic acid (AA), 2-hydroxyethyl methacrylate (HEMA), butyl acrylate (BA), dimethylaminoethyl methacrylate maleate (D) and N,N'-methylene-bis-acrylamide (MBAA). Due to the dense crosslinking network and hydrophobic interaction, the ionogel exhibited remarkable anti-swelling properties (7.64% of the 30-day equilibrium swelling ratio in deionized water). D and MBAA were simultaneously introduced into the ionogel system as cross-linking agents to provide a large number of cross-linking points, improving the cross-linking density of the ionogel. Importantly, the introduction of D avoided ionic leakage by free radical copolymerization. Furthermore, the ionogel maintained stable mechanical properties and conductivity after being submerged in deionized water owing to remarkable anti-swelling performance. The mechanical properties of the ionogel retained 89.75% of the initial mechanical properties after a 5-day immersion in deionized water. Therefore, this ionogel could be employed as an underwater flexible wearable sensor for high humidity or underwater motion monitoring.

Biomimetic zwitterionic copolymerized chitosan as an articular lubricant

Restoration of the lubrication functions of articular cartilage is an effective treatment to alleviate the progression of osteoarthritis (OA). Herein, we fabricated chitosan-block-poly(sulfobetaine methacrylate) (CS-b-pSBMA) copolymer via a free radical polymerization of sulfobetaine methacrylate onto activated chitosan segment, structurally mimicking the lubricating biomolecules on cartilage. The successful copolymerization of CS-b-pSBMA was verified by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and 1H nuclear magnetic resonance. Friction test confirmed that the CS-b-pSBMA copolymer could achieve an excellent lubrication effect on artificial joint materials such as Ti6Al4V alloy with a coefficient of friction as low as 0.008, and on OA-simulated cartilage, better than the conventional lubricant hyaluronic acid, and the adsorption effect of lubricant on cartilage surface was proved by a fluorescence labeling experiment. In addition, CS-b-pSBMA lubricant possessed an outstanding stability, which can withstand enzymatic degradation and even a long-term storage up to 4 weeks. In vitro studies showed that CS-b-pSBMA lubricant had a favorable antibacterial activity and good biocompatibility. In vivo studies confirmed that the CS-b-pSBMA lubricant was stable and could alleviate the degradation process of cartilage in OA mice. This biomimetic lubricant is a promising articular joint lubricant for the treatment of OA and cartilage restoration.

Antibacterial conductive polyacrylamide/quaternary ammonium chitosan hydrogel for electromagnetic interference shielding and strain sensing

The utilization of biomass-based conductive polymer hydrogels in wearable electronics holds great promise for advancing performance and sustainability. An interpenetrating network of polyacrylamide/2-hydroxypropyltrimethyl ammonium chloride chitosan (PAM/HACC) was firstly obtained through thermal-initiation polymerization of AM monomers in the presence of HACC. The positively charged groups on HACC provide strong electrostatic interactions and hydrogen bonding with the PAM polymer chains, leading to improved mechanical strength and stability of the hydrogel network. Subsequently, the PAM/HACC networks served as the skeletons for the in-situ polymerization of polypyrrole (PPy), and then the resulting conductive hydrogel demonstrated stable electromagnetic shielding performance (40 dB), high sensitivity for strain sensing (gauge factor = 2.56). Moreover, the incorporation of quaternary ammonium chitosan into PAM hydrogels enhances their antimicrobial activity, making them more suitable for applications in bacterial contamination or low-temperature environments. This conductive hydrogel, with its versatility and excellent mechanical properties, shows great potential in applications such as electronic skin and flexible/wearable electronics.

Using chitosan nanofibers to simultaneously improve the toughness and sensing performance of chitosan-based ionic conductive hydrogels

Conductive hydrogels, especially polysaccharide-based ionic conductive hydrogels, have received increasing interest in the field of wearable sensors due to their similarity to human skin. Nevertheless, it is still a challenging task to simultaneously prepare a self-healed and adhesive conductive hydrogel with good toughness, temperature tolerance and high sensing performance, especially with high sensitivity and a low detection limit. Herein, we developed a new strategy to improve the toughness and sensing performance of a multifunctional conductive hydrogel by simultaneously using dissolved chitosan (CS) and solid chitosan nanofibers (CSFs) to induce the formation of hierarchical polymeric networks in the hydrogel. The tensile strength and elongation at break of the hydrogel could be improved from 70.3 kPa and 1005 % to 173.9 kPa and 1477 %, respectively, simply by introducing CSFs to the hydrogel, and its self-healing, adhesive and antibacterial properties were effectively retained. When serving as a resistive sensing material, the introduction of CSFs increased the gauge factor of the hydrogel-based strain sensor from 8.25 to 14.27. Moreover, the hydrogel-based strain sensor showed an ultralow detection limit of 0.2 %, excellent durability and stability (1000 cycles) and could be used to detect various human activities. In addition, the hydrogel prepared by using a water-glycerol binary solvent system showed temperature-tolerant performance and possessed adequate sensitivity when serving as a resistive sensing material. Therefore, this work provides a new way to prepare multifunctional conductive hydrogels with good toughness, sensing performance and temperature tolerance to expand the application range of hydrogel-based strain sensors.

Progress of Research on Conductive Hydrogels in Flexible Wearable Sensors

Conductive hydrogels, characterized by their excellent conductivity and flexibility, have attracted widespread attention and research in the field of flexible wearable sensors. This paper reviews the application progress, related challenges, and future prospects of conductive hydrogels in flexible wearable sensors. Initially, the basic properties and classifications of conductive hydrogels are introduced. Subsequently, this paper discusses in detail the specific applications of conductive hydrogels in different sensor applications, such as motion detection, medical diagnostics, electronic skin, and human-computer interactions. Finally, the application prospects and challenges are summarized. Overall, the exceptional performance and multifunctionality of conductive hydrogels make them one of the most important materials for future wearable technologies. However, further research and innovation are needed to overcome the challenges faced and to realize the wider application of conductive hydrogels in flexible sensors.

Conductive and Eco-friendly Biomaterials-based Hydrogels for Noninvasive Epidermal Sensors: A Review

As noninvasive wearable electronic devices, epidermal sensors enable continuous, real-time, and remote monitoring of various human physiological parameters. Conductive biomaterials-based hydrogels as sensor matrix materials have good biocompatibility, biodegradability, and efficient stimulus response capabilities and are widely applied in motion monitoring, healthcare, and human-machine interaction. However, biomass hydrogel-based epidermal sensing devices still need excellent mechanical properties, prolonged stability, multifunctionality, and extensive practicality. Therefore, this paper reviews the common biomass hydrogel materials for epidermal sensing (proteins, polysaccharides, polyphenols, etc.) and the various types of noninvasive sensing devices (strain/pressure sensors, temperature sensors, glucose sensors, electrocardiograms, etc.). Moreover, this review focuses on the strategies of scholars to enhance sensor properties, such as strength, conductivity, stability, adhesion, and self-healing ability. This work will guide the preparation and optimization of high-performance biomaterials-based hydrogel epidermal sensors.

Fabrication of a tough, long-lasting adhesive hydrogel patch via the synergy of interfacial entanglement and adhesion group densification

Adhesive hydrogels (AHs) are considered ideal materials for flexible sensors. However, the lack of effective energy dissipation networks and sparse surface polar groups in AHs lead to poor mechanical properties and interfacial adhesion, which limit their practical application. Herein, a tough, long-lasting adhesive and highly conductive nanocomposite hydrogel (PACPH) was fabricated via the synergy of interfacial entanglement and adhesion group densification. PACPH was obtained by the in situ polymerization of highly carboxylated cellulose nanocrystals (SCNCPA, surface pre-grafted polyacrylic acid chains, C-COOH = 11.5 mmol g-1) with the acrylic acid precursor. The unique tacticity of SCNCPA provides strong interface entanglement and multiple hydrogen bonds with the PACPH network, which further increases the energy dissipated during SCNCPA displacements, and enhances the mechanical properties of PACPH (tensile strength = 1.45 MPa, modulus = 332 kPa, and fracture toughness = 13.2 MJ m-3). Meanwhile, SCNCPA increases the density of surface polar groups in PAPCH and also acts as an anchor point to improve the adhesion strength (>2-3 times) of PACPH on various substrates. The combination of excellent mechanical, adhesive, and conductive properties of the PAPCH-integrated patches enables long-term monitoring of human daily activities and electrocardiogram (ECG) signals, verifying that PAPCH is a promising material platform for the further development of flexible sensors and other health management devices.

Polysaccharide-based hydrogels for medical devices, implants and tissue engineering: A review

Hydrogels are highly biocompatible biomaterials composed of crosslinked three-dimensional networks of hydrophilic polymers. Owing to their natural origin, polysaccharide-based hydrogels (PBHs) possess low toxicity, high biocompatibility and demonstrate in vivo biodegradability, making them great candidates for use in various biomedical devices, implants, and tissue engineering. In addition, many polysaccharides also show additional biological activities such as antimicrobial, anticoagulant, antioxidant, immunomodulatory, hemostatic, and anti-inflammatory, which can provide additional therapeutic benefits. The porous nature of PBHs allows for the immobilization of antibodies, aptamers, enzymes and other molecules on their surface, or within their matrix, potentiating their use in biosensor devices. Specific polysaccharides can be used to produce transparent hydrogels, which have been used widely to fabricate ocular implants. The ability of PBHs to encapsulate drugs and other actives has been utilized for making neural implants and coatings for cardiovascular devices (stents, pacemakers and venous catheters) and urinary catheters. Their high water-absorption capacity has been exploited to make superabsorbent diapers and sanitary napkins. The barrier property and mechanical strength of PBHs has been used to develop gels and films as anti-adhesive formulations for the prevention of post-operative adhesion. Finally, by virtue of their ability to mimic various body tissues, they have been explored as scaffolds and bio-inks for tissue engineering of a wide variety of organs. These applications have been described in detail, in this review.

Multimodal and flexible hydrogel-based sensors for respiratory monitoring and posture recognition

The accurate monitoring of respiratory events and human motion states holds paramount importance in the realm of health surveillance and disease prognostication. An exquisitely precise, multifaceted, portable, and environmentally resilient sensor designed for health monitoring would undeniably be of utmost desirability, despite its persisting as a formidable challenge. Here, we propose a breath monitoring and posture recognition system that utilizes hydrogel electrolytes based on polyvinyl alcohol, sodium alginate, and starch, suitable for supercapacitors and multimodal wearable sensors. The multimodal smart sensors can independently detect mechanical and thermal changes through the output signals of capacitance and resistance, respectively. Moreover, we have cultivated an artificial neural network to achieve a finger-pressing posture recognition accuracy of up to 99.259%. Our hydrogel sensors have also been successfully employed in the diagnosis of obstructive sleep apnea syndrome. The flexible electronic device derived from this study exhibit a plethora of functionalities, thereby affording a novel perspective for the design and fabrication of advanced flexible electronic contrivances that find applications across diverse domains such as medicine and virtual reality.

Functional adhesive hydrogels for biological interfaces

Hydrogel adhesives are extensively employed in biological interfaces such as epidermal flexible electronics, tissue engineering, and implanted device. The development of functional hydrogel adhesives is a critical, yet challenging task since combining two or more attributes that seem incompatible into one adhesive hydrogel without sacrificing the hydrogel's pristine capabilities. In this Review, we highlight current developments in the fabrication of functional adhesive hydrogels, which are suitable for a variety of application scenarios, particularly those that occur underwater or on tissue/organ surface conditions. The design strategies for a multifunctional adhesive hydrogel with desirable properties including underwater adhesion, self-healing, good biocompatibility, electrical conductivity, and anti-swelling are discussed comprehensively. We then discuss the challenges faced by adhesive hydrogels, as well as their potential applications in biological interfaces. Adhesive hydrogels are the star building blocks of bio-interface materials for individualized healthcare and other bioengineering areas.

Multifunctional acetylated distarch phosphate based conducting hydrogel with high stretchability, ultralow hysteresis and fast response for wearable strain sensors

The rapid development of flexible sensors has greatly increased the demand for high-performance hydrogels. However, it remains a challenge to fabricate flexible hydrogel sensors with high stretching, low hysteresis, excellent adhesion, good conductivity, sensing characteristics and bacteriostatic function in a simple way. Herein, a highly conducting double network hydrogel is presented by incorporating lithium chloride (LiCl) into the hydrogel consisting of poly (2-acrylamide-2-methylpropanesulfonic acid/acrylamide/acrylic acid) (3A) network and acetylated distarch phosphate (ADSP). The addition of ADSP not only formed hydrogen bonds with 3A to improve the toughness of the hydrogel but also plays the role of "physical cross-linking" in 3A by "anchoring" the polymer molecular chains together. Tuning the composition of the hydrogel allows the attainment of the best functions, such as high stretchability (∼770 %), ultralow hysteresis (2.2 %, ε = 100 %), excellent electrical conductivity (2.9 S/m), strain sensitivity (GF = 3.0 at 200-500 % strain) and fast response (96 ms). Based on the above performance, the 3A/ADSP/LiCl hydrogel strain sensor can repeatedly and stably detect and monitor large-scale human movements and subtle sensing signals. In addition, the 3A/ADSP/LiCl hydrogel shows a good biocompatibility and bacteriostatic ability. This work provides an effective strategy for constructing the conductive hydrogels for wearable devices and flexible sensors.

Tailoring the Swelling-Shrinkable Behavior of Hydrogels for Biomedical Applications

Hydrogels with tailor-made swelling-shrinkable properties have aroused considerable interest in numerous biomedical domains. For example, as swelling is a key issue for blood and wound extrudates absorption, the transference of nutrients and metabolites, as well as drug diffusion and release, hydrogels with high swelling capacity have been widely applicated in full-thickness skin wound healing and tissue regeneration, and drug delivery. Nevertheless, in the fields of tissue adhesives and internal soft-tissue wound healing, and bioelectronics, non-swelling hydrogels play very important functions owing to their stable macroscopic dimension and physical performance in physiological environment. Moreover, the negative swelling behavior (i.e., shrinkage) of hydrogels can be exploited to drive noninvasive wound closure, and achieve resolution enhancement of hydrogel scaffolds. In addition, it can help push out the entrapped drugs, thus promote drug release. However, there still has not been a general review of the constructions and biomedical applications of hydrogels from the viewpoint of swelling-shrinkable properties. Therefore, this review summarizes the tactics employed so far in tailoring the swelling-shrinkable properties of hydrogels and their biomedical applications. And a relatively comprehensive understanding of the current progress and future challenge of the hydrogels with different swelling-shrinkable features is provided for potential clinical translations.

Preparation and properties of lignin-based dual network hydrogel and its application in sensing

Ionic conductive hydrogels prepared from various biological macromolecules are ideal materials for the manufacture of human motion sensors from the perspective of resource regeneration and environmental sustainability. However, it is now difficult to develop conductive hydrogels including excellent self-healing and mechanical properties, mainly due to their inherent trade-off between dynamic cross-linked healing and stable cross-linked mechanical strength. In this work, alkali lignin-Polyvinyl alcohol-polyacrylic acid double network conductive hydrogels with high mechanical strength and good self-healing properties were prepared. We formed the primary network structure by hydrogen bonding interaction between polyvinyl alcohol, alkali lignin and polyacrylic acid, and the secondary network structure by coordination interaction with polyacrylic acid through the addition of Fe3+. The added lignin acts as a dynamic linkage bridge in a porous network mediated by multiple ligand bonds, imparting superior mechanical properties to the hydrogels. The relationships between the alkali lignin and iron ion dosage and the comprehensive properties of hydrogels (adhesion, antibacterial, self-healing, electrical conductivity and mechanical properties) were studied in detail. On this basis, the hydrogels explored the role of lignin in the regulation of hydrogels properties and revealed the self-healing and conductive mechanism.

Self-healing liquid metal hydrogel for human-computer interaction and infrared camouflage

Due to their mechanical flexibility, conductive hydrogels have been widely investigated in the fields of flexible electronics and soft robots, but their non-negligible disadvantages, such as poor toughness and limited self-healing, severally restrict their practical application. Herein, gallium indium alloy (EGaIn) is utilized to initiate the polymerization and simultaneously serve as flexible fillers to construct a super-stretchable and self-healing liquid metal/polyvinyl alcohol/p(acrylamide-co-octadecyl methacrylate) (liquid metal/PVA/P(AAm-co-SMA)) double network hydrogel (LM hydrogel). The synergistic effect of the rigid PVA microcrystal network and the ductile P(AAm-co-SMA) hydrophobic network, together with the ionic coordination and hydrogen bonds between polymer networks (multiple physical cross-links), endow the LM hydrogel with excellent super-stretchability (2000%), toughness (3.00 MJ m-3), notch resistance, and self-healing property (healing efficiency > 99% at 25 °C after 24 h). The LM hydrogel exhibits sensitive strain sensing behavior, allowing human-computer interaction to achieve motion recognition and health monitoring. Significantly, owing to the excellent photothermal effect and low infrared emissivity of EGaIn, the LM hydrogel reveals great potential in infrared camouflage. The work of self-healing conductive liquid metal hydrogels will promote the research and practical application of hydrogels and liquid metal in intelligent devices and military fields.

High-Performing Conductive Hydrogels for Wearable Applications

Conductive hydrogels have gained significant attention for their extensive applications in healthcare monitoring, wearable sensors, electronic devices, soft robotics, energy storage, and human-machine interfaces. To address the limitations of conductive hydrogels, researchers are focused on enhancing properties such as sensitivity, mechanical strength, electrical performance at low temperatures, stability, antibacterial properties, and conductivity. Composite materials, including nanoparticles, nanowires, polymers, and ionic liquids, are incorporated to improve the conductivity and mechanical strength. Biocompatibility and biosafety are emphasized for safe integration with biological tissues. Conductive hydrogels exhibit unique properties such as stretchability, self-healing, wet adhesion, anti-freezing, transparency, UV-shielding, and adjustable mechanical properties, making them suitable for specific applications. Researchers aim to develop multifunctional hydrogels with antibacterial characteristics, self-healing capabilities, transparency, UV-shielding, gas-sensing, and strain-sensitivity.

Synthesis, Characterization, Properties, and Biomedical Application of Chitosan-Based Hydrogels

The prospective applications of chitosan-based hydrogels (CBHs), a category of biocompatible and biodegradable materials, in biomedical disciplines such as tissue engineering, wound healing, drug delivery, and biosensing have garnered great interest. The synthesis and characterization processes used to create CBHs play a significant role in determining their characteristics and effectiveness. The qualities of CBHs might be greatly influenced by tailoring the manufacturing method to get certain traits, including porosity, swelling, mechanical strength, and bioactivity. Additionally, characterization methods aid in gaining access to the microstructures and properties of CBHs. Herein, this review provides a comprehensive assessment of the state-of-the-art with a focus on the affiliation between particular properties and domains in biomedicine. Moreover, this review highlights the beneficial properties and wide application of stimuli-responsive CBHs. The main obstacles and prospects for the future of CBH development for biomedical applications are also covered in this review.

Antimicrobial and Mechanical Properties of Ag@Ti3C2Tx-Modified PVA Composite Hydrogels Enhanced with Quaternary Ammonium Chitosan

Polyvinyl alcohol (PVA) is a polymeric material with good biocompatibility, excellent hydrophilicity, and a large number of hydroxyl groups. However, due to its insufficient mechanical properties and poor inhibition of bacteria, it has a lack of applications in wound dressings, stent materials, and other fields. In this study, a simple method was used to prepare composite gel materials: Ag@MXene-HACC-PVA hydrogels with a double-network structure were prepared using an acetal reaction. Due to the double cross-linked interaction, the hydrogel has good mechanical properties and is resistant to swelling. The adhesion and bacterial inhibition were enhanced due to the addition of HACC. In addition, the strain sensing properties of this conductive hydrogel were stable, and the GF (specification factor) was 1.7617 at 40-90% strain. Therefore, the dual-network hydrogel with excellent sensing properties, adhesion properties, antibacterial properties, and cytocompatibility has potential applications in biomedical materials, especially as a tissue engineering repair material.

Highly Adhesive, Stretchable, and Antifreezing Hydrogel with Excellent Mechanical Properties for Sensitive Motion Sensors and Temperature-/Humidity-Driven Actuators

Conductive hydrogels as flexible wearable devices have attracted considerable attention due to their mechanical flexibility and intelligent sensing. How to endow more and better performance, such as high self-adhesion, stretchability, and wide application temperature range for traditional hydrogels and flexible sensors is a challenge. Herein, a stretchable, self-adhesive, and antifreezing conductive hydrogel with multiple networks and excellent mechanical properties was prepared by a two-step method for its application in sensitive motion sensors and temperature-/humidity-driven actuators. First, quaternary chitosan (QCS) was introduced into the network of an acrylamide (AM) and 1-vinyl imidazole (VI) copolymer initiated by UV-photoinitiated radical polymerization. Then, the double-network hydrogel was immersed in a FeCl₃ solution to fabricate the P(AAm-co-VI)/QCS-Fe³⁺ ionic hydrogel with multiple physical networks. The properties of the hydrogel were controllable and adjustable. The toughness of the ionic hydrogel could reach up to 654.4 kJ/m³, the fracture strength could reach 253.1 kPa, and the compressive strength reached 8.4 MPa at an 80% compression strain. The multiple physical networks improved the mechanical properties and the quick resilience of the hydrogel. A large amount of FeCl₃ in the network greatly enhanced the ionic conductivity. Meanwhile, hydrogen bonds with water molecules inhibit the formation of ice crystals between zero water molecules and enhance the freezing resistance of P(Aam-co-VI)/QCS hydrogels. The active group on the QCS chain provided adhesiveness to various substrates for hydrogels. The P(AAm-co-VI)/QCS-Fe³⁺ hydrogel-based sensor showed high sensitivity, which can detect human movement and pulse, with a gauge factor of 2.37. Finally, due to the different dehydration rates of the P(AAm-co-VI)/QCS-Fe³⁺ and P(AAm-co-VI)/QCS hydrogel, a double-layer temperature/humidity-driven actuator was fabricated, expanding the application of conductive hydrogels.

Chitosan-based high-strength supramolecular hydrogels for 3D bioprinting

The loss of tissues and organs is a major challenge for biomedicine, and the emerging 3D bioprinting technology has brought the dawn for the development of tissue engineering and regenerative medicine. Chitosan-based supramolecular hydrogels, as novel biomaterials, are considered as ideal materials for 3D bioprinting due to their unique dynamic reversibility and fantastic biological properties. Although chitosan-based supramolecular hydrogels have wonderful biological properties, the mechanical properties are still under early exploration. This paper aims to provide some inspirations for researchers to further explore. In this review, common 3D bioprinting techniques and the properties required for bioink for 3D bioprinting are firstly described. Then, several strategies to enhance the mechanical properties of chitosan hydrogels are introduced from the perspectives of both materials and supramolecular binding motifs. Finally, current challenges and future opportunities in this field are discussed. The combination of chitosan-based supramolecular hydrogels and 3D bioprinting will hold promise for developing novel biomedical implants.

A hydrogel sensor driven by sodium carboxymethyl starch with synergistic enhancement of toughness and conductivity

Conductive hydrogels are potential materials for fabricating wearable strain sensors owing to their excellent mechanical properties and high conductivity. However, it is a challenge to simultaneously enhance the mechanical properties and conductivity of hydrogels. Herein, a simple strategy was proposed for concurrently enhancing the mechanical properties and conductivity of the wearable hydrogel sensors by introducing carboxymethyl starch sodium (CMS). The introduction of CMS not only dramatically enhanced the mechanical performance of the hydrogel due to hydrogen bonding and electrostatic interaction, but also improved the conductivity of the hydrogel owing to the existence of sodium ions. As a result, the hydrogel sensors with excellent durability and stability could repeatedly detect and distinguish various human activities, including walking, chewing and speaking. Meanwhile, multiple sensors are also assembled into a 3D sensor array for detecting the three-dimensional distribution of stress and strain. Moreover, the peaks of EMG signals and the waveforms of ECG signals could be recorded because the hydrogel sensor presented super sensitivity and fast response. Therefore, the multifunctional hydrogel presented remarkable potential for applications in human medical diagnosis, health monitoring and artificial intelligence.

High-Strength, Conductive, Antifouling, and Antibacterial Hydrogels for Wearable Strain Sensors

Conductive hydrogels have shown great potential in the field of flexible strain sensors. However, their application is greatly limited due to the poor antifouling and low mechanical strength. Unfortunately, it is still a challenge to improve these two distinct properties simultaneously. Herein, a hydrogel with high strength, good conductivity, and excellent antifouling and antibacterial properties was prepared through the synergistic effect of physical and chemical cross-linking. First, acrylic acid (AA), acrylamide (AM), and 2-methacryloyloxyethyl phosphorylcholine (MPC) monomers were polymerized in the presence of chitosan chains to form the hydrogel. Then, the prepared hydrogel was immersed in a ferric ion solution to further strengthen the hydrogel through ion coordination. The obtained CS-P(AM-MPC-AA_0.2)-Fe_0.1³⁺ hydrogel showed outstanding tensile strength (1.03 MPa), excellent stretchability (1075%), good toughness (7.03 MJ/m³), and fatigue resistance. The CS-P(AM-MPC-AA_0.2)-Fe_0.1³⁺ hydrogel also demonstrated good ion conductivity (0.42 S/m) and excellent antifouling and antibacterial properties. In addition, the strain sensor constructed by the CS-P(AM-MPC-AA_0.2)-Fe_0.1³⁺ hydrogel showed high sensitivity and good stability. This work presented a facile method to construct a zwitterionic hydrogel with high-strength, conductive, antifouling, and antibacterial properties, which suggested a promising gel platform for flexible wearable sensors.

Dual-emission fluorescent nanoprobe based on Ag nanoclusters for sensitive detection of Cu(II)

Noble metal nanoclusters have attracted much attention because of their excellent fluorescence properties. In this work, we demonstrated a dual-emission fluorescent nanocomposite based on silver nanoclusters. First, we synthesized positively charged His-AgNCs, which emits intense blue light, and then Ag nanoclusters with stable red emission were synthesized using DHLA as the ligand. Thus a dual-emission fluorescent nanoprobe was successfully obtained through electrostatic self-assembly, with the advantages of good water solubility and excellent stability. Based on the intensity ratio of the two emission peaks, the nanoprobe can be used for selective and sensitive detection of copper ions, and presents a good linear relationship within a certain concentration range. In addition, we also designed a polymer film, and our dual-emission nanoprobe was successfully loaded onto it, which means that the visual detection of copper ions is possible. This indicates that our dual-emission fluorescent nanoprobe has potential application prospects in environmental analysis, medical diagnosis, biological detection, etc.

Chitosan-enhanced nonswelling hydrogel with stable mechanical properties for long-lasting underwater sensing

Existing anti-swelling hydrogels with poor mechanical strength restrict their underwater human monitoring as wearable electronic sensing equipment. Herein, a nonswelling double network (DN) hydrogel with strong self-recoverability (97.22%) was developed by adding chitosan (CS) to poly(acrylic acid-2-methoxyethyl acrylate)-Fe³⁺ [P(AA-MEA)-Fe] network. Owing to the introduction of CS, the hydrogel displayed excellent nonswelling properties under aqueous solutions (pH = 1, 4 and 7), physiological saline, seawater, dodecane, n-hexane and chloroform. Besides, CS improved mechanical properties of hydrogel through non-covalent network (large stretchability of 1199%, tensile strength of 0.462 MPa and toughness of 2.01 MJ/m³). Surprisingly, the hydrogel still reached the extensibility (1072%) and tensile stress (0.467 MPa) even after immersing in water for 7 days. Fabricating hydrogel as flexible strain sensor, periodic real-time signals of human movements (e.g., joint actions and electronic skin touching) were accurately monitored under the water and seawater. The nonswelling P(AA-MEA)-CS-Fe hydrogel shows huge potential in underwater sensing.

Structure and properties of chitosan/sodium dodecyl sulfate composite films

In this study, we investigated the effect of sodium dodecyl sulfate (SDS) content on the structure and properties of chitosan films. It is found that the binding of SDS to chitosan was realized through the interactions between -SO4 - and -NH3 +, forming an ionically cross-linked film. Structural analysis revealed that the crystallization was greatly hindered by introducing SDS. With an increase of SDS content, the glass transition temperatures (T g) of chitosan films increased due to the formation of crosslinks. Compared to pure chitosan film, the composite films had lower content of moisture and possessed better thermal stability. In addition, the mechanical properties of the as-obtained composite films were closely related to the content of SDS, and were significantly improved in the biopolymer films with moderate SDS content. These results indicate that the microstructure as well as properties of the chitosan films can be regulated by adding SDS.

Muscle-Inspired Anisotropic Hydrogel Strain Sensors

Hydrogel strain sensors have attracted tremendous attention in medical monitoring, flexible wearable devices, and human-machine interfaces. However, traditional hydrogels exhibit isotropic sensing performance based on their isotropic structure. Therefore, it is challenging to fabricate a hydrogel with an anisotropic structure similar to human tissues for achieving anisotropic sensing characteristics. Herein, we proposed a simple and effective method for preparing anisotropic poly(vinyl alcohol) (PVA) conductive hydrogels, which demonstrated anisotropic mechanical properties and anisotropic ion conductivity. The anisotropic hydrogel was successfully constructed through first thermal stretching and then directional freezing. The mechanical strength of hydrogels along the parallel stretching direction (stress of 1596 kPa and toughness of 3.69 MJ/m³) was higher than that of the hydrogels along the vertical stretching direction (stress of 883.1 kPa and toughness of 1.96 MJ/m³). Moreover, the hydrogel showed anisotropic conductivity on the advantage of the different ion channels. The prepared hydrogel sensor exhibited anisotropic sensing for multidirectional stress in the strain range from 0.5 to 100%. The gauge factors (GF) parallel to the stretching direction were greater than the GF vertical to the stretching direction. The anisotropic hydrogel sensors are expected to have broad application prospects in flexible wearable devices and medical monitoring.

Fabrication of adhesive hydrogels based on poly (acrylic acid) and modified hyaluronic acid

Hydrogel wound dressings with good flexibility and adhesiveness to resist deformation during wound movement are urgently needed in clinical application. In this work, the hydrogels based on poly (acrylic acid) and N-hydroxysuccinimide grafted hyaluronic acid (PAA/HA_-NHS) with good elasticity and adhesiveness were prepared by chemical cross-linking and hydrogen bonding. The elastic and adhesive properties within the PAA hydrogels could reach a balance by adjusting the concentration of potassium persulfate (KPS) and N, N'-methylenebisacrylamide (MBA). Subsequently, HA_-NHS was incorporated into the PAA hydrogel system. The mechanical test revealed that the elongation at break and interfacial toughness of the PAA/HA_-NHS hydrogels could reach 265.79 ± 21.93% and 52.88 ± 3.51 J/m², respectively. In addition, the hydrogels possess a connected porous network and well water absorption ability (with porosity of 51.90 ± 0.11% and swelling ratio in wet state of 122.17 ± 2.78%). In vitro experiment demonstrates that the PAA/HA_-NHS hydrogels exhibit nontoxic and cell in-adhesive properties. The PAA/HA_-NHS hydrogels could cover the wound spots directly, stretch with the skin movement and gently remove from the wound tissue due to the suitable adhesiveness and poor cell adhesion. In conclusion, the PAA/HA_-NHS hydrogels show great application value in the field of wound dressing.

Self-Healing Mechanism and Conductivity of the Hydrogel Flexible Sensors: A Review

Sensors are devices that can capture changes in environmental parameters and convert them into electrical signals to output, which are widely used in all aspects of life. Flexible sensors, sensors made of flexible materials, not only overcome the limitations of the environment on detection devices but also expand the application of sensors in human health and biomedicine. Conductivity and flexibility are the most important parameters for flexible sensors, and hydrogels are currently considered to be an ideal matrix material due to their excellent flexibility and biocompatibility. In particular, compared with flexible sensors based on elastomers with a high modulus, the hydrogel sensor has better stretchability and can be tightly attached to the surface of objects. However, for hydrogel sensors, a poor mechanical lifetime is always an issue. To address this challenge, a self-healing hydrogel has been proposed. Currently, a large number of studies on the self-healing property have been performed, and numerous exciting results have been obtained, but there are few detailed reviews focusing on the self-healing mechanism and conductivity of hydrogel flexible sensors. This paper presents an overview of self-healing hydrogel flexible sensors, focusing on their self-healing mechanism and conductivity. Moreover, the advantages and disadvantages of different types of sensors have been summarized and discussed. Finally, the key issues and challenges for self-healing flexible sensors are also identified and discussed along with recommendations for the future.

Advances in multifunctional chitosan-based self-healing hydrogels for biomedical applications

Multifunctional self-healing hydrogels have recently attracted considerable interest in biomedical applications owing to their diverse properties, including self-healing, adhesion, conduction, antibacterial, and stimulus-response, which can meet various application requirements, ranging from wound dressings and delivery vehicles to the production of scaffolds for tissue repair and regeneration. As a natural polycationic polysaccharide with good biocompatibility, chitosan is widely used in hydrogel formation as there are many amino and hydroxyl groups along the chains that can actively participate in various physical effects and chemical reactions, which enable it to construct self-healing hydrogels and fulfill multiple functions. In this review, the formation of chitosan-based self-healing hydrogels and the related self-healing mechanism are summarized, including Schiff base, metal coordination, ionic and hydrogen bonds, hydrophobic and host-guest interactions, with a focus on the strategies for their multi-functionalization. In the last section, the applications of the chitosan-based self-healing hydrogels in the fields of wound dressings, delivery vehicles, scaffolds, and biological sensors are discussed. Overall, it is highly expected that this review could provide an insight into the prospective development of multifunctional self-healing hydrogels for biomedical applications.

A Surface-Confined Gradient Conductive Network Strategy for Transparent Strain Sensors toward Full-Range Monitoring

The development of transparent and flexible sensors suitable for the full-range monitoring of human activities is highly desirable, yet presents a daunting challenge due to the need for a combination of properties such as high stretchability, high sensitivity, and good linearity. Gradient structures are commonly found in many biological systems and exhibit excellent mechanical properties. Here, we report a novel surface-confined gradient conductive network (SGN) strategy to construct conductive polymer hydrogel-based stain sensors (CHSS). This CHSS showed an ultrahigh stretchability of 4000% strain, transparency above 90% at a wavelength of 600 nm, as well as skin-like Young's modulus of 40 kPa. Impressively, the sensitivity was improved to 3.0 and outstanding linear sensing performance was achieved simultaneously in the ultrawide range of 0% to 4000% strain with a high R-square value of 0.994. With the help of SGN strategy, this CHSS was able to monitor both large-scale and small-scale human motions and activities. This SGN strategy can open a new avenue for the development of novel flexible strain sensors with excellent mechanical, transparent, and sensing performance for full-range monitoring of human activities.

Hemostatic and antibacterial PVA/Kaolin composite sponges loaded with penicillin-streptomycin for wound dressing applications

Hemorrhage is the major hindrance over the wound healing, which triggers microbial infections and might provoke traumatic death. Herein, new hemostatic and antibacterial PVA/Kaolin composite sponges were crosslinked using a freeze-thawing approach and boosted by penicillin-streptomycin (Pen-Strep). Physicochemical characteristics of developed membranes were analyzed adopting Fourier transformed infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), a thermal gravimetric analyzer (TGA), and differential scanning calorimetry (DSC). Furthermore, the impacts of kaolin concentrations on porosity, swelling behavior, gel fraction, and degradation of the membranes were investigated. SEM analyses revealed a spongy-like structure of hydrogels associated with high dispersion of kaolin inside PVA matrix. The thermal characteristics of PVA/Kaolin were significantly ameliorated compared to the prime PVA. Moreover, the results exhibited significant variations of swelling performance, surface roughness and pore capacity due to the alterations of kaolin contents. Besides, the adhesive strength ability was manifestly enhanced for PVA-K0.1 sponge. Biomedical evaluations including antibacterial activity, blood clotting index and thrombogenicity of the membranes were studied. The contact of PVA/Kaolin to blood revealed notable augmentation in blood clotting. Furthermore, the incorporation of kaolin into PVA presented mild diminution in antibacterial activities. Moreover, PVA/Kaolin composites illustrated no cellular toxicity towards fibroblast cells. These remarkable features substantiate that the PVA-K0.1 sponge could be applied as a multifunctional wound dressing.