BN-embedded aromatics for optoelectronic applications

Frozen-Pair-Type pCCD-Based Methods and Their Double Ionization Variants to Predict Properties of Prototypical BN-Doped Light Emitters

Novel, robust, computationally efficient, and reliable theoretical methods are indispensable for the large-scale modeling of desired molecular properties. One such example is the orbital optimized pair coupled-cluster doubles (oo-pCCD) ansatz and its various CC extensions, which range from closed-shell ground- and excited-state models to open-shell variants. Specifically, the ionization-potential equation-of-motion frozen-pair (IP-EOM-fp)CC methods proved to be competitive with standard CC-type methods for modeling the ionization potentials of organic electronics. In this work, we extend the existing IP-EOM-pCCD-based methods to their double ionization potential (DIP) variants, resulting in various DIP-EOM-fpCC models, including up to double excitations. These methods open the way to reach open-shell singlet, triplet, and quintet states using various pCCD reference functions. Their accuracy is tested for the singlet-triplet gaps of the ortho-, meta-, and para-benzynes. Then, the most accurate models are applied to study the effects of boron and nitrogen doping on designing prototypical naphthalene-based donors and acceptors. Our results demonstrate consistent and reliable outcomes with standard methods and available experimental data. Most importantly, fpCC-type methods show slightly better performance than DIP-EOM-CCSD for strongly-correlated cases and similar performance for systems dominated by dynamical correlation when determining singlet-triplet gaps.

A Modular Approach Toward BN-Embedded Terrylene Diimides

This work presents the first example of heteroatoms embedded terrylene diimides (TDIs), which were synthesized from the BN-embedded imide building block in a modular manner. Through the control of the amount and orientations of the BN unit(s), the manipulation of dipole moments of the obtained BN-embedded terrylene diimides (BN-TDIs) was achieved, which in turn extended the fluorescence of BN-TDIs to near infrared region. The structures of BN-TDIs were established via single crystal X-ray diffractions. Stronger carbonyl-π interactions were observed for BN-TDIs in their crystal structures compared with that of TDI, which could be utilized in the construction of supramolecular architectures. The organic thin film transistors based on BN-TDIs were also fabricated. BN-TDI-S showcased higher electron mobilities than that of TDI, indicating the potential of BN-TDIs as promising n-type organic semiconductors.

BN-embedded aromatic hydrocarbons: synthesis, functionalization and applications

Substituting CC double bonds with B-N bonds in polycyclic aromatic hydrocarbons (PAHs) has emerged as a promising approach to advance and diversify organic functional materials. This structural modification not only imparts unique electronic and optical properties, but also enhances chemical stability, thereby opening new avenues for material design and applications. However, the widespread adoption of BN-fused aromatic hydrocarbons in practical applications is still in its nascent phase. This constraint stems primarily from the challenges in precisely tailoring molecular structures to optimize photophysical and electronic properties, thereby influencing their efficacy in targeted applications. Consequently, a comprehensive evaluation of historical, current, and prospective developments in BN-fused aromatic hydrocarbons is deemed essential. This review offers an in-depth overview of recent advancements in BN-fused aromatic hydrocarbons, focusing on synthetic strategies, fundamental properties, and emerging applications. Additionally, we elucidate the pivotal role of computational chemistry in directing the design, discovery, and optimization of these materials. Our objective is to foster interdisciplinary collaboration and stimulate innovative approaches to fully harness the potential of azaborinine chemistry across various fields, including organic optoelectronics, biomedicine, and related disciplines.

Synthesis, Structure, and Properties of Two Planar BN-Benzofluorenes

Two planar BN doped benzofluorenes (BN-BkF and BN-BjF) were synthesized separately through palladium-catalyzed intramolecular C-C or C-N coupling reactions. The structures of both BN-BkF and BN-BjF are unambiguously confirmed by X-ray crystallographic analysis. Moreover, the BN unit doping leads to a much lower HOMO level and higher LUMO level as compared to their carbon analogues BkF and BjF. In comparison to BkF and BjF, both BN-BkF and BN-BjF exhibit blue shifts in their ultraviolet-visible (UV-vis) absorption and fluorescence emission spectra. Furthermore, halogenation of BN-BkF and BN-BjF afforded monohalogenated BN-benzofluorenes in good yields. These monohalogenated BN-benzofluorenes can serve as convenient intermediates for palladium-catalyzed coupling reactions to yield a series of functionalized BN-benzofluorene derivatives. The UV-vis absorption and emission spectroscopies in dichloromethane of these BN-benzofluorene derivatives were studied, and the photophysics of these compounds exhibited a high degree of substituent dependency.

Polycyclic Aromatic Hydrocarbons with a Boron-Doped Zigzag/Armchair Topology: A Boron-Edging Strategy for Organic Narrowband Emitters

Control over molecular topologies and/or heteroatom doping of polycyclic aromatic hydrocarbons (PAHs) may alter their electronic structures and achieve desirable physical properties. Herein, this work challenges boron-doping and edge-transformation of π-extended PAHs. We successfully synthesized a series of large-size PAHs featuring a boron-doped zigzag/armchair edge topology through one-pot multifold Scholl cyclization reaction. Two of them possess the desired C3-symmetric and unexpected unsymmetrical C54B3 nanographene frameworks, respectively, thus illustrating triply boron-edging manipulations of hexa-peri-hexabenzocoronene. Detailed studies reveal that such boron-doped edge topology significantly inhibits their excited-state molecular vibrations and thereby produces narrowband emission characteristics. The full width at half maximum (FWHM) values of their fluorescence spectra are as small as 12-18 nm, which have never been observed for pristine boron-doped π-system and are among the smallest values reported for organic emitters. Their solution-processed organic light-emitting diodes (OLEDs) display extremely narrowband electroluminescence, and additionally, the obtained FWHM of only 23 nm represents the narrowest one reported for red OLEDs.

Near-infrared phosphorescence in a ruthenium(II) complex equipped with a pyridyl-1,2-azaborine ligand

The 4-methyl-2-(pyridin-2-yl)-2,1-borazaronaphthalene molecule Hazab-py has been successfully used, for the first time, as a ligand in a ruthenium(II) polypyridine complex A (with the formula [Ru(dtbbpy)2(azab-py)]+, where dtbbpy = 4,4'-di-tert-butyl-2,2'-bipyridine). This compound was characterized by NMR spectroscopy and high-resolution mass spectrometry (MS), and its electrochemical and photophysical properties were fully investigated and compared to those of its homoleptic analogue [Ru(dtbbpy)3]2+ (B), an archetypical mono-cationic cyclometalated complex C (with the formula [Ru(dtbbpy)2(ppy)]+, where Hppy = 2-phenylpyridine), and the more structurally similar analogue [Ru(dtbbpy)2(naft-py)]+ (D), where the B-N unit of the azaborine ligand is replaced by a standard CC one, resulting in the 2-(naphthalen-2-yl)pyridine ligand (Hnaft-py). The presence of the novel 1,2-azaborine ligand induces a 0.51 V decrease in the redox gap of complex A, compared to that of B, leading to electrochemical and photophysical properties that resemble those of C and D. Accordingly, the azaborine complex displays an emission band extending up to the near infrared region of the spectrum (with the maximum at 765 nm in room-temperature acetonitrile solution), arising from a triplet metal-to-ligand charge-transfer (3MLCT) state. As in the case of other mono-cationic cyclometalated ruthenium(II) complexes, A shows modest photoluminescence quantum yields (PLQYs), but higher PLQYs when compared to those of its direct CC analogue D (e.g., PLQY = 0.6 vs. 0.1% in a PMMA matrix at 298 K). Density functional theory (DFT) calculations were used to provide complete rationalization of the electronic properties of all the complexes and to identify lower-lying metal-centred triplets (3MC), responsible for the low PLQYs of such an azaborine-based ruthenium(II) complex.

Heterocoronenes Containing Pyridine and 1,2-Azaborine Units

Several coronenes containing pyridine and azaborine units have been readily prepared and structurally confirmed by X-ray crystallographic analysis. The codoping results in interesting findings and properties such as the first observation of BN-H---NPy hydrogen bonds in crystals of BN-PAHs, short π-π stacking distances, lowered HOMO-LUMO levels, narrow band gap, and unique dual response to fluoride ion and proton in solution.

N-Directed Two-Fold Bromoboration of Diynes Enables Access to Brominated BN-Embedded PAHs

N-directed 2-fold bromoboration reactions of diynes with BBr3 have been developed, allowing the access to novel internally BN-doped polycyclic aromatic hydrocarbons from readily available precursors under mild conditions. Computational investigations identified three potential reaction mechanisms, each involving either BBr3 or [BBr4]-, with low activation barriers (ΔG‡ < 16 kcal/mol) for all pathways. The resulting brominated products can be further functionalized through various cross-coupling protocols, enabling the synthesis of highly luminescent emitters with quantum yield exceeding 90.

Peripheral Fusion of Carbon-Based Aromatic Rings to B4N4-Heteropentalene Leading to Close π-Stacking in the Solid State

π-Electronic molecules with a BN-heterocyclic and carbon-based aromatic hybrid ring system (h-CBN) are interesting in that they potentially exhibit synergistic properties arising from the two different π-systems. Here we report the synthesis and properties of a h-CBN-type molecule (1) having a bicyclic B4N4-heteropentalene core fused with extended aromatic rings. This molecule exhibits excellent chemical stability despite the absence of bulky substituents for kinetic protection, which in turn provides effective stacking of the π-system upon crystallization. Depending on the crystallization solvent, 1 forms two polymorphs, i. e., the α- and β-phases. While both phases have one-dimensional columnar structures, the π-stacking geometries associated with the transfer integrals of the frontier orbitals are different, resulting in a twofold difference in the electrical conducting properties. We also found that upon thermal vacuum deposition, 1 gives an amorphous film, which serves as a host material for a red phosphorescent OLED device (maximum external quantum efficiency: 15.5 and 13.3 % at 0.1 and 2.5 mA, respectively).

Syntheses, Geometric and Electronic Structures of Inorganic Cumulenes

Molecular chains of two-coordinate carbon atoms (cumulenes) have long been targeted, due to interest in the electronic structure and applications of extended π-systems, and their relationship to the carbon allotrope, carbyne. While formal (isoelectronic) B═N for C═C substitution has been employed in two-dimensional (2-D) materials, unsaturated one-dimensional all-inorganic "molecular wires" are unknown. Here, we report high-yielding synthetic approaches to heterocumulenes containing a five-atom BNBNB chain, the geometric structure of which can be modified by choice of end group. The diamido-capped system is bent at the 2-/4-positions, and natural resonance theory calculations reveal significant contributions from B═N(:)-B≡N-B resonance forms featuring a lone pair at N (consistent with observed N-centered nucleophilicity). Molecular modification to generate a linear system best described by a B═N═B═N═B resonance structure involves chemical transformation of the capping groups (using B(C5F5)3) to enhance their π-acidity and conjugate the N-lone pairs.

Heteroatom-Promoted Polyhexagonal Saddle-Shaped Molecular Structures and their Supramolecular Coassembly with C60

Molecules with curved architecture can exhibit unique optoelectronic properties due to the concave-convex π-surface. However, synthesizing negatively curved saddle-shaped aromatic systems has been challenging due to the internal structural strain. Herein, we report the facile synthesis of two polyhexagonal molecular systems, 1 and 2, with saddle shape geometry by judiciously varying the aromatic moiety, avoiding the harsh synthetic methods as that of heptagonal aromatic saddle systems. The unique geometry preferences of B, N, and S furnish suitable curvature to the molecules, featuring saddle shape. The saddle geometry also enables them to interact with fullerene C60 , and the supramolecular interactions of fullerene C60 with 1 and 2 modify their optoelectronic properties. Crystal structure analysis reveals that 1, with a small π-surface, forms a double columnar array of fullerenes in the solid state. In contrast, 2 with a large π-surface produces a supramolecular capsule entrapping two discrete fullerenes. The intermolecular interactions between B, N, S, and the aryl-π surface of the host and C60 guest are the stabilizing factors for creating these supramolecular structures. Comprehensive computational, optical, and Raman spectroscopic studies establish the charge transfer interactions between B-N doped heterocycle host and fullerene C60 guest.

Orienting Group Directed Cascade Borylation for Efficient One-Shot Synthesis of 1,4-BN-Doped Polycyclic Aromatic Hydrocarbons as Narrowband Organic Emitters

1,4-BN-doped polycyclic aromatic hydrocarbons (PAHs) have emerged as very promising emitters in organic light-emitting diodes (OLEDs) due to their narrowband emission spectra that may find application in high-definition displays. While considerable research has focused on investigating the properties of these materials, less attention has been placed on their synthetic methodology. Here we developed an efficient synthetic method for 1,4-BN-doped PAHs, which enables sustainable production of narrowband organic emitting materials. By strategically introducing substituents, such as methyl, tert-butyl, phenyl, and chloride, at the C5 position of the 1,3-benzenediamine substrates, we achieved remarkable regioselective borylation in the para-position of the substituted moiety. This approach facilitated the synthesis of a diverse range of 1,4-BN-doped PAHs emitters with good yields and exceptional regioselectivity. The synthetic method demonstrated excellent scalability for large-scale production and enabled late-stage transformation of the borylated products. Mechanistic investigations provided valuable insights into the pivotal roles of electron effect and steric hindrance effect in achieving highly efficient regioselective borylation. Moreover, the outstanding device performance of the synthesized compounds 10 b and 6 z, underscores the practicality and significance of the developed method.

From propenolysis to enyne metathesis: tools for expedited assembly of 4a,8a-azaboranaphthalene and extended polycycles with embedded BN

The synthesis of BN-containing molecules, which have an interesting isosteric relationship to their parent all-C cores, has drawn a great deal of attention as an avenue to alter and tune molecular function. Nevertheless, many cores with embedded BN are still hard to synthesize, and thus, further effort is required in this direction. Herein, we present an integrated approach to BN-containing polycycles rooted in an exceptionally clean B-N condensation of amines with a tri-allylborane. Having released propene as the only byproduct, the resulting BN precursors are seamlessly telescoped into BN-containing polycyclic cores via a set of additional methodologies, either developed here ad-hoc or applied for the first time for the synthesis of BN-cycles. As the "sharpening stone" of the process, BN-embedded naphthalene, which has previously only been obtained in low yield, can now be synthesized efficiently through propenolysis, ring-closing metathesis and a new high-yielding aromatization. As a more advanced application, an analogously obtained BN-containing bis-enyne is readily converted to BN-containing non-aromatic tetra-, penta- and hexacyclic structures via ring-closing enyne metathesis, followed by the Diels-Alder cycloaddition. The resulting air-sensitive structures are easily handled by preventive hydration (quaternization) of their B-N bridge; reverting this hydration restores the original Bsp2-Nsp2 structure. In the future, these structures may pave the way to BN-anthracenes and other π-extended BN-arenes.

Synthesis and characterization of azaborepin radicals in solid neon through boron-mediated C-N bond cleavage of pyridine

The reactivity of pyridine is a complex topic due to its unique electronic structure. The reactions of atomic boron with pyridine molecules in solid neon have been investigated using matrix isolation infrared absorption spectroscopy. Three products (marked as A, B, and C) were observed and characterized through 10B, D and 15N isotopic substitution pyridine regents as well as quantum chemical calculations. In the reaction, the ground-state boron atom can attack the lone pair electrons of the nitrogen atom in the pyridine molecule, resulting in the formation of a 1-boropyridinyl radical (A). Alternatively, addition to the aromatic π-system of pyridine can occur in a [1,4] type, leading to the formation of a B[η2(1,4)-C5H5N] complex (B). Under UV-visible light (280 < λ < 580 nm) irradiation, these two compounds can further undergo photo-isomerization to form BN-embedded seven-membered azaborepin compounds (C). The observation of species A, B, and the subsequent photo-isomerization to species C is consistent with theoretical predictions, indicating that these reactions are kinetically favorable. This research provides valuable insights into the future design and synthesis of corresponding BN heterocyclic derivatives.

Assessing the Role of BN-Embedding Position in B2N2-Perylenes

Incorporating heteroatoms can effectively modulate the molecular optoelectronic properties. However, the fundamental understanding of BN doping effects in BN-embedded polycyclic aromatic hydrocarbons (PAHs) is underexplored, lacking rational guidelines to modulate the electronic structures through BN units for advanced materials. Herein, a concise synthesis of novel B2N2-perylenes with BN doped at the bay area is achieved to systematically explore the doping effect of BN position on the photophysical properties of PAHs. The shift of BN position in B2N2-perylenes alters the π electron conjugation, aromaticity and molecular rigidness significantly, achieving substantially higher electron transition abilities than those with BN doped in the nodal plane. It is further clarified that BN position dominates the photophysical properties over BN orientation. The revealed guideline here may apply generally to novel BN-PAHs, and aid the advancement of BN-PAHs with highly-emissive performance.

N-Heterocycle-Editing to Access Fused-BN-Heterocycles via Ring-Opening/C-H Borylation/Reductive C-B Bond Formation

Skeletal editing of N-heterocycles has recently received considerable attention, and the introduction of boron atom into heterocycles often results in positive property changes. However, direct enlargement of N-heterocycles through boron atom insertion is rarely reported in the literature. Here, we report a N-heterocyclic editing reaction through the combination boron atom insertion and C-H borylation, accessing the fused-BN-heterocycles. The synthetic potential of this chemistry was demonstrated by substrate scope and late-stage diversification of products.

Precise synthesis of BN embedded perylene diimide oligomers for fast-charging and long-life potassium-organic batteries

Replacing the C[double bond, length as m-dash]C bond with an isoelectronic BN unit is an effective strategy to tune the optoelectronic properties of polycyclic aromatic hydrocarbons (PAHs). However, precise control of the BN orientations in large PAH systems is still a synthetic challenge. Herein, we demonstrate a facile approach for the synthesis of BN embedded perylene diimide (PDI) nanoribbons, and the polarization orientations of the BN unit were precisely regulated in the two PDI trimers. These BN doped PDI oligomers show great potential as organic cathodes for potassium-ion batteries (PIBs). In particular, trans-PTCDI3BN exhibits great improvement in voltage potential, reversible capacities (ca. 130 mA h g-1), superior rate performance (19 s to 69% of the maximum capacity) and ultralong cyclic stability (nearly no capacity decay over 30 000 cycles), which are among those of state-of-the-art organic-based cathodes. Our synthetic approach stands as an effective way to access large PAHs with precisely controlled BN orientations, and the BN doping strategy provides useful insight into the development of organic electrode materials for secondary batteries.

Organoboron-based multiple-resonance emitters: synthesis, structure-property correlations, and prospects

Boron-based multiple-resonance (MR) emitters exhibit the advantages of narrowband emission, high absolute photoluminescence quantum yield, thermally activated delayed fluorescence (TADF), and sufficient stability during the operation of organic light-emitting diodes (OLEDs). Thus, such MR emitters have been widely applied as blue emitters in triplet-triplet-annihilation-driven fluorescent devices used in smartphones and televisions. Moreover, they hold great promise as TADF or terminal emitters in TADF-assisted fluorescence or phosphor-sensitised fluorescent OLEDs. Herein we comprehensively review organoboron-based MR emitters based on their synthetic strategies, clarify structure-photophysical property correlations, and provide design guidelines and future development prospects.

A Combination of B- and N-Doped π-Systems Enabling Systematic Tuning of Electronic Structures and Properties

Doping heteroatoms into polycyclic aromatic hydrocarbons (PAHs) may alter their structures and thereby physical properties. This study reports the construction of B/N-codoped PAHs via combining the B- and N-doped π-systems. Two π-extended B/N-codoped PAHs were synthesized through the Mallory photoreaction. Both feature a C48 BN2 π-skeleton, which is assembled by linearly fusing three substructures including B-doped and sp2 -hybridized N-doped π-moieties and one pyrene unit. In comparison to the pristine B-doped analog, their intramolecular charge transfer (ICT) states are distinctly modulated by the fused N-doped π-system and the further incorporated cyano group, leading to their tunable optical properties, as revealed by detailed theoretical and experimental analysis. Furthermore, these three molecules have sufficient Lewis acidity and can coordinate with Lewis base to form Lewis acid-base adducts, and notably, such intermolecular complexation can further dynamically modulate their ICT transitions and thereby photophysical properties, such as producing blue, green and red fluorescence.

Palladium-Catalyzed Atroposelective Kinetic C-H Olefination and Allylation for the Synthesis of C-B Axial Chirality

The direct C-H functionalization of 1,2-benzazaborines, especially asymmetric version, remains a great challenge. Here we report a palladium-catalyzed enantioselective C-H olefination and allylation reactions of 1,2-benzazaborines. This asymmetric approach is a kinetic resolution (KR), providing various C-B axially chiral 2-aryl-1,2-benzazaborines and 3-substituted 2-aryl-1,2-benzazaborines in generally high yields with excellent enantioselectivities (selectivity (S) factor up to 354). The synthetic potential of this reaction is showcased by late-stage modification of complex molecules, scale-up reaction, and applications.

Solvatochromic and Aggregation-Induced Emission Active Nitrophenyl-Substituted Pyrrolidinone-Fused-1,2-Azaborine with a Pre-Twisted Molecular Geometry

Boron-nitrogen-containing heterocycles with extended conjugated π-systems such as polycyclic aromatic 1,2-azaborines, hold the fascination of organic chemists due to their unique optoelectronic properties. However, the majority of polycyclic aromatic 1,2-azaborines aggregate at high concentrations or in the solid-state, resulting in aggregation-caused quenching (ACQ) of emission. This practical limitation poses significant challenges for polycyclic aromatic 1,2-azaborines' use in many applications. Additionally, only a few solvatochromic polycyclic aromatic 1,2-azaborines have been reported and they all display minimal solvatochromism. Therefore, the scope of available polycyclic 1,2-azaborines needs to be expanded to include those displaying fluorescence at high concentration and in the solid-state as well as those that exhibit significant changes in emission intensity in various solvents due to different polarities. To address the ACQ issue, we evaluate the effect of a pre-twisted molecular geometry on the optoelectronic properties of polycyclic aromatic 1,2-azaborines. Specifically, three phenyl-substituted pyrrolidinone-fused 1,2-azaborines (PFAs) with similar structures and functionalized with diverse electronic moieties (-H, -NO2, -CN, referred to as PFA 1, 2, and 3, respectively) were experimentally and computationally studied. Interestingly, PFA 2 displays two distinct emission properties: 1) solvatochromism, in which its emission and quantum yields are tunable with respect to solvent polarity, and 2) fluorescence that can be completely "turned off" and "turned on" via aggregation-induced emission (AIE). This report provides the first example of a polycyclic aromatic 1,2-azaborine that displays both AIE and solvatochromism properties in a single BN-substituted backbone. According to time-dependent density function theory (TD-DFT) calculations, the fluorescence properties of PFA 2 can be explained by the presence of a low-lying n-π* charge transfer state inaccessible to PFA 1 or PFA 3. These findings will help in the design of future polycyclic aromatic 1,2-azaborines that are solvatochromic and AIE-active as well as in understanding how molecular geometry affects these compounds' optoelectronic properties.

Diradical B/N-Doped Polycyclic Hydrocarbons

Heterocyclic diradicaloids with atom-precise control over open-shell nature are promising materials for organic electronics and spintronics. Herein, we disclose quinoidal π-extension of a B/N-heterocycle for generating B/N-type organic diradicaloids. Two quinoidal π-extended B/N-doped polycyclic hydrocarbons that feature fusion of the B/N-heterocycle motif with the antiaromatic s-indacene or dicyclopenta[b,g]naphthalene core were synthesized. This quinoidal π-extension and B/N-heterocycle leads to their open-shell electronic nature, which stands in contrast to the multiple-resonance effect of conventional B/N-type emitters. These B/N-type diradicaloids have modulated (anti)aromaticity and enhanced diradical characters comparing with the all-carbon analogues, as well as intriguing properties, such as magnetic activities, narrow energy gaps and highly red-shifted absorptions. This study thus opens the new space for both of B/N-doped polycyclic π-systems and heterocyclic diradicaloids.

Synthesis and Properties of B4 N4 -Heteropentalenes Fused with Polycyclic Hydrocarbons

Hybrid molecules of π-conjugated carbon rings and BN-heterocyclic rings (h-CBNs) fused with each other have been a rare class of compounds due to the limited availability of their synthetic methods. Here we report the synthesis of new h-CBNs featuring a B₄ N₄ -heteropentalene core and polycyclic aromatic hydrocarbon wings. Using 1,2-azaborinine derivatives as a building block, we developed a rational synthetic protocol that allows the formation of a B₄ N₄ ring in a stepwise manner, resulting in the fully fused ABA-type triblock molecules. Thus, three derivatives of 1 bearing naphthalene (1_Naph ), anthracene (1_Anth ), or phenanthrene (1_Phen ) wings fused with the B₄ N₄ core were synthesized and characterized. Among them, 1_Phen , which displays the highest triplet-state energy, was found to serve a host material for phosphorescent OLED devices, for which a maximum external quantum efficiency of 13.7 % was recorded. These findings may promote the synthesis of various types of h-CBNs aiming at new properties arising from the synergy of two different π-electronic systems.

Incorporation of a Boron-Nitrogen Covalent Bond Improves the Charge-Transport and Charge-Transfer Characteristics of Organoboron Small-Molecule Acceptors for Organic Solar Cells

An organoboron small-molecular acceptor (OSMA) M_B←N containing a boron-nitrogen coordination bond (B←N) exhibits good light absorption in organic solar cells (OSCs). In this work, based on M_B←N, OSMA M_B-N, with the incorporation of a boron-nitrogen covalent bond (B-N), was designed. We have systematically investigated the charge-transport properties and interfacial charge-transfer characteristics of M_B-N, along with M_B←N, using the density functional theory (DFT) and the time-dependent density functional theory (TD-DFT). Theoretical calculations show that M_B-N can simultaneously boost the open-circuit voltage (from 0.78 V to 0.85 V) and the short-circuit current due to its high-lying lowest unoccupied molecular orbital and the reduced energy gap. Moreover, its large dipole shortens stacking and greatly enhances electron mobility by up to 5.91 × 10^-3 cm²·V^-1·s^-1. Notably, the excellent interfacial properties of PTB7-Th/M_B-N, owing to more charge transfer states generated through the direct excitation process and the intermolecular electric field mechanism, are expected to improve OSCs performance. Together with the excellent properties of M_B-N, we demonstrate a new OSMA and develop a new organoboron building block with B-N units. The computations also shed light on the structure-property relationships and provide in-depth theoretical guidance for the application of organoboron photovoltaic materials.

Synthetic Doping of Acenaphthylene through BN/CC Isosterism and a Direct Comparison with BN-Acenaphthene

Boron/nitrogen-doped acenaphthylenes, a new class of BN-doped cyclopenta-fused polycyclic aromatic hydrocarbons, were synthesized via indole-directed C-H borylation. The reference molecule BN-acenaphthene was also synthesized in a similar manner. Both BN-acenaphthylene and BN-acenaphthene were unequivocally characterized by single-crystal X-ray analysis. The aromaticities of each ring in BN-acenaphthylenes were quantified by experimental and theoretical methods. Moreover, doping the BN unit into acenaphthylene can increase the LUMO level and decrease the HOMO level, resulting in wider HOMO-LUMO energy gaps. Furthermore, regioselective bromination of BN-acenaphthylene (B-Mes) afforded monobrominated BN-acenaphthylene in good yield. Subsequently, cross-coupling of brominated BN-acenaphthylene gave a series of BN-acenaphthylene derivatives. In addition, the photophysical properties of these BN-acenaphthylene derivatives can be fine-tuned by the substituents on the BN-acenaphthylene scaffold.

Synthesis of BN-Polyarenes by a Mild Borylative Cyclization Cascade

Reaction of BCl₃ with suitably substituted o-alkynylanilines promotes a cascade reaction in which BN-polycyclic compounds are obtained via the formation of two new cycles and three new bonds in a single operational step. The reaction is highly efficient and takes place at room temperature, providing a very mild and straightforward strategy for the preparation of BN-aromatic compounds, which can be further transformed into a variety of BN-PAHs with different polycyclic cores and substituents.

PO-containing dibenzopentaarenes: facile synthesis, structures and optoelectronic properties

Incorporation of heteroatoms into polyarenes has been developed as an effective approach to alter their intrinsic structures and properties. Herein, we designed and synthesized two PO-containing dibenzopentaarene isomers (5a and 5b) and studied their structures and properties, along with those of dibenzopentaarenes containing six-membered Si- and B-heterocycles (3 and 4). These heterocyclic polyarenes have similar frameworks to well-known heptazethrene, and thus can be regarded as members of the heteroatom-doped zethrene system. The heterocycles greatly affect not only the molecular and packing structures but also the electronic structures and properties. Notably, while compounds 3 and 4 adopt almost planar geometries, 5a possesses a clearly curved conformation, leading to its brick-type slipped and dense π-π stacking mode. Moreover, the electron-withdrawing PO groups endow 5a and 5b with simultaneously lowered lowest unoccupied molecular orbital (LUMO)/highest occupied molecular orbital (HOMO) levels, whereas the p-π conjugation of the B atoms in 4 leads to its smaller energy gap and thus remarkably red-shifted absorption and fluorescence bands by over 80 nm, though all of these molecules possess similar closed-shell structures. This study thus deepens the understanding of heteroatom-doping effects, which may be expanded to develop other heteroatom-doped zethrene materials.

The Rise of 1,4-BN-Heteroarenes: Synthesis, Properties, and Applications

BN-heteroarenes, which employ both boron and nitrogen in aromatic hydrocarbons, have gained great attention in the fields of organic chemistry and materials science. Nevertheless, the extensive studies on BN-heteroarenes are largely limited to 1,2-azaborine-based compounds with B-N covalent bonds, whereas 1,3- and 1,4-BN-heteroarenes are relatively rare due to their greater challenge in the synthesis. Recently, significant progresses have been achieved in the synthesis and applications of BN-heteroarenes featuring 1,4-azaborines, especially driven by their significant potential as multiresonant thermally activated delayed fluorescence (MR-TADF) materials. Therefore, it is timely to review these advances from the chemistry perspective. This review summarizes the synthetic methods and recent achievements of 1,4-azaborine-based BN-heteroarenes and discusses their unique properties and potential applications of this emerging class of materials, highlighting the value of 1,4-BN-heteroarenes beyond MR-TADF materials. It is hoped that this review would stimulate the conversation and cooperation between chemists who are interested in azaborine chemistry and materials scientists working in the fields of organic optoelectronics, metal catalysis, and carbon-based nanoscience etc.

Dipole Effect of BN-Doped Tetrathienonaphthalene on Photo-Physical Properties and Lewis Acidity of the D-π-A Derivatives

Dimesitylboryl-acceptor (A) and diarylamine-donor (D) substituents are introduced at α positions of BN-doped tetrathienonaphthalene in the same and opposite directions of the B-N bond, namely, B-BN-N and N-BN-B, in order to demonstrate how the substitution patterns influence the photophysical properties. The photophysical and electrochemical properties of these D-π-A molecules have been investigated in detail, aided by UV-vis absorption and fluorescence spectroscopy as well as cyclic voltammetry. We find that both B-BN-N and N-BN-B show the typical intramolecular charge transfer emission. N-BN-B exhibits strong fluorescence with a narrower band gap and stronger Lewis acidity than that of B-BN-N. DFT calculations help give a reasonable explanation that subtle differences in the electronic structure of the host skeleton could also influence the substituents and feed back this effect to the entire molecule.

Accessing Boron-Doped Pentaphene Analogues from 12-Boradibenzofluorene

Borole-doped polycyclic aromatic hydrocarbons (PAHs) have garnered attention in recent years due to their attractive photophysical properties and potential utility in electronic devices. In this work, a borole-doped PAH, 12-boradibenzofluorene, is synthesized and formal intermolecular nitrene and oxygen atom insertion reactions were employed to access 1,2-azaborine- and 1,2-oxaborine-containing analogues of the carbonaceous PAH pentaphene. Iodosobenzene is established as a versatile reagent for oxygen atom insertion reactions into a variety of borole species to access 1,2-oxaborine systems.

Synthesis, Characterization, and Properties of BN-Fluoranthenes

Boron/nitrogen-doped fluoranthenes, a new class of BN-doped cyclopenta-fused polycyclic aromatic hydrocarbons, were synthesized via pyrrolic-type nitrogen directed C-H borylation. Regioselective bromination of BN-fluoranthene (3a) gave mono- and dibrominated BN-fluoranthenes. The halogenated BN-fluoranthene (3b) can undergo various of further cross-coupling reactions to deliver a series of BN-fluoranthenes. Moreover, incorporating BN unit in to fluoranthene resulted in a wider HOMO-LUMO energy gaps. The aromaticities of the BN-fluoranthene (3a) were quantified by experimental and computational studies.

Planar Tetraindolodipleiadiene via Zirconium-Promoted Intramolecular Indolyl C4-H Homocoupling

A novel N-rimmed PAH molecule containing a dipleiadiene core (TIDP) was designed and synthesized from indole, wherein a ZrCl₄-promoted intramolecular C4-H homocoupling reaction of the indole moieties was the key approach. TIDP exhibited a nearly full planar structure and antiaromaticity of the two embedded heptagonal rings. The extremely stable radical cation TIDP^•+·PF₆^- was isolated quantitatively by oxidation with AgPF₆.

Concise Synthesis of BN-Dibenzo[f,k]tetraphenes with Different BN Substitution Positions and Direct Comparison with Their Carbonaceous Analogue

Two types of "parental" BN-dibenzo[f,k]tetraphenes (BNDBT-1 and BNDBT-2) have been synthesized via a transition-metal-catalyzed tandem cross-coupling reaction as key steps. Both BNDBT-1 and BNDBT-2 are fully characterized; one of them is unambiguously confirmed by a single X-ray crystal structure. Compared to its all-carbon analogue DBT, BNDBT-1 and BNDBT-2 exhibit a higher highest occupied molecular orbital (HOMO) and lower lowest unoccupied molecular orbital (LUMO) energy, while the BN doping position slightly influences the HOMO and LUMO energies of BNDBT-1 and BNDBT-2. Both BNDBT-1 and BNDBT-2 exhibit red-shifted absorption and emission spectra and higher emission efficiencies, as compared to their carbonaceous analogue DBT. Moreover, organic light emitting diodes were fabricated using BNDBT-1 and BNDBT-2 as emitters, demonstrating their potential applications.

Aggregation caused quenching to aggregation induced emission transformation: a precise tuning based on BN-doped polycyclic aromatic hydrocarbons toward subcellular organelle specific imaging

Polycyclic aromatic hydrocarbons (PAHs) with boron–nitrogen (BN) moieties have attracted tremendous interest due to their intriguing electronic and optoelectronic properties. However, most of the BN-fused π-systems reported to date are difficult to modify and exhibit traditional aggregation-caused quenching (ACQ) characteristics. This phenomenon greatly limits their scope of application. Thus, continuing efforts to seek novel, structurally distinct and functionally diverse structures are highly desirable. Herein, we proposed a one-stone-two-birds strategy including simultaneous exploration of reactivity and tuning of the optical and electronic properties for BN-containing π-skeletons through flexible regioselective functionalization engineering. In this way, three novel functionalized BN luminogens (DPA-BN-BFT, MeO-DPA-BN-BFT and DMA-DPA-BN-BFT) with similar structures were obtained. Intriguingly, DPA-BN-BFT, MeO-DPA-BN-BFT and DMA-DPA-BN-BFT exhibit completely different emission behaviors. Fluorogens DPA-BN-BFT and MeO-DPA-BN-BFT exhibit a typical ACQ effect; in sharp contrast, DMA-DPA-BN-BFT possesses a prominent aggregation induced emission (AIE) effect. To the best of our knowledge, this is the first report to integrate ACQ and AIE properties into one BN aromatic backbone with subtle modified structures. Comprehensive analysis of the crystal structure and theoretical calculations reveal that relatively large twisting angles, multiple intermolecular interactions and tight crystal packing modes endow DMA-DPA-BN-BFT with strong AIE behavior. More importantly, cell imaging demonstrated that luminescent materials DPA-BN-BFT and DMA-DPA-BN-BFT can highly selectively and sensitively detect lipid droplets (LDs) in living MCF-7 cells. Overall, this work provides a new viewpoint of the rational design and synthesis of advanced BN–polycyclic aromatics with AIE features and triggers the discovery of new functions and properties of azaborine chemistry.

A one-stone-two-birds strategy including simultaneous exploration of reactivity and tuning of the optical and electronic properties for BN-fused polycyclic aromatics through flexible regioselective functionalization engineering is presented.

BN-Substitution in Dithienylpyrenes Prevents Excimer Formation in Solution and in the Solid State

Boron-nitrogen substitutions in polycyclic aromatic hydrocarbons (PAHs) have a strong impact on the optical properties of the molecules due to a significantly more heterogeneous electron distribution. However, besides these single-molecule properties, the observed optical properties of PAHs critically depend on the degree of intermolecular interactions such as π-π-stacking, dipolar interactions, or the formation of dimers in the excited state. Pyrene is the most prominent example showing the latter as it exhibits a broadened and strongly bathochromically shifted emission band at high concentrations in solution compared to the respective monomers. In the solid state, the impact of intermolecular interactions is even higher as it determines the crystal packing crucially. In this work, a thiophene-flanked BN-pyrene (BNP) was synthesized and compared with its all-carbon analogue (CCP) in solution and in the solid state by means of crystallography, NMR spectroscopy, UV-vis spectroscopy, and photoluminescence (PL) spectroscopy. In solution, PL spectroscopy revealed the solvent-dependent presence of excimers of CCP at high concentrations. In contrast, no excimers were found in BNP. Clear differences were also observed in the single-crystal packing motifs. While CCP revealed overlapped pyrene planes with centroid distances in the range of classical π-stacking interactions, the BNP scaffolds were displaced and significantly more spatially separated.

Bright Luminescence by Combining Chiral [2.2]Paracyclophane with a Boron-Nitrogen-Doped Polyaromatic Hydrocarbon Building Block

Novel BN-doped compounds based on chiral, tetrasubstituted [2.2]paracyclophane and NBN-benzo[f,g]tetracene were synthesized by Sonogashira-Hagihara coupling. Conjugated ethynyl linkers allow electronic communication between the π-electron systems through-bond, whereas through-space interactions are provided by strong π-π overlap between the pairs of NBN-building blocks. Excellent optical and chiroptical properties in racemic and enantiopure conditions were measured, with molar absorption coefficients up to ϵ=2.04×105  M-1  cm-1 , fluorescence quantum yields up to ΦPL =0.70, and intense, mirror-image electronic circular dichroism and circularly polarized luminescence signals of the magnitude of 10-3 for the absorption and luminescence dissymmetry factors. Computed glum,calcd. values match the experimental ones. Electroanalytical data show both oxidation and reduction of the ethynyl-linked tetra-NBN-substituted paracyclophane, with an overlap of two redox processes for oxidation leading to a diradical dication.

"Spine Surgery" of Perylene Diimides with Covalent B-N Bonds toward Electron-Deficient BN-Embedded Polycyclic Aromatic Hydrocarbons

BN-embedded polycyclic aromatic hydrocarbons (PAHs) with unique optoelectronic properties are underdeveloped relative to their carbonaceous counterparts due to the lack of suitable and facile synthetic methods. Moreover, the dearth of electron-deficient BN-embedded PAHs further hinders their application in organic electronics. Here we present the first facile synthesis of novel perylene diimide derivatives (B₂N₂-PDIs) featuring n-type B-N covalent bonds. The structures of these compounds are fully confirmed through the detailed characterizations with NMR, MS, and X-ray crystallography. Further investigation shows that the introduction of BN units significantly modifies the photophysical and electronic properties of these B₂N₂-PDIs and is further understood with the aid of theoretical calculations. Compared with the parent perylene diimides (PDIs), B₂N₂-PDIs exhibit deeper highest occupied molecular orbital energy levels, new absorption peaks in the high-energy region, hypsochromic shift of absorption and emission maxima, and decrement of photoluminescent quantum yields. Single-crystal field-effect transistors based on B₂N₂-PDIs showcase an electron mobility up to 0.35 cm² V^-1 s^-1, demonstrating their potential application in optoelectronic materials.

The rapid construction of bis-BN dipyrrolyl[a,j]anthracenes and a direct comparison with a carbonaceous analogue

A series of bis-BN dipyrrolyl[a,j]anthracenes and a representative carbonaceous analogue have been synthesized. We studied the optical properties and OLED applications of these BN-PAHs and compared them with the carbonaceous counterpart.

1,10a-Dihydro-1-aza-10a-boraphenanthrene and 6a,7-Dihydro-7-aza-6a-boratetraphene: Two New Fluorescent BN-PAHs

Previously unknown 1,10a-dihydro-1-aza-10a-boraphenanthrene and 6a,7-dihydro-7-aza-6a-boratetraphene have been efficiently synthesized. Bromination of these BN-PAHs proceeds with complete regioselectivity, resulting in the formation of different substituted derivatives via cross-coupling reactions. These compounds exhibit rather high fluorescence quantum yields (up to ϕ_F = 0.80).

An Air- and Water-Stable B4 N4 -Heteropentalene Serving as a Host Material for a Phosphorescent OLED

Replacement of the carbon-carbon bonds of antiaromatic compounds with polar boron-nitrogen bonds often provides isoelectronic BN compounds with excellent thermodynamic stability and interesting photophysical properties. By this element-substitution strategy, we synthesized a new B₄ N₄ -heteropentalene derivative, 1, which is fully substituted with mesityl groups. Owing to kinetic protection by the sterically bulky substituents, 1 is remarkably stable toward air and even water. Single-crystal X-ray analysis of 1 revealed the bonding characteristics of the B₄ N₄ -heteropentalene structure. In a glassy matrix, 1 emitted short-wavelength phosphorescence with an onset at 350 nm, indicating that the triplet energy is substantially high. DFT calculations reasonably explained the ground- and excited-state electronic structures of 1 as well as its emission properties. Motivated by the high-energy triplet state of 1, we used it as a host material to fabricate a phosphorescent organic light-emitting diode with an external quantum efficiency of 15 %.

Parent B2 N2 -Perylenes with Different BN Orientations

Introducing BN units into polycyclic aromatic hydrocarbons expands the chemical space of conjugated materials with novel properties. However, it is challenging to achieve accurate synthesis of BN-PAHs with specific BN positions and orientations. Here, three new parent B₂ N₂ -perylenes with different BN orientations are synthesized with BN-naphthalene as the building block, providing systematic insight into the effects of BN incorporation with different orientations on the structure, (anti)aromaticity, crystal packing and photophysical properties. The intermolecular dipole-dipole interaction shortens the π-π stacking distance. The crystal structure, (anti)aromaticity, and photophysical properties vary with the change of BN orientation. The revealed BN doping effects may provide a guideline for the synthesis of BN-PAHs with specific stacking structures, and the synthetic strategy employed here can be extended toward the synthesis of larger BN-embedded PAHs with adjustable BN patterns.

BN/BO-Ullazines and Bis-BO-Ullazines: Effect of BO Doping on Aromaticity and Optoelectronic Properties

We have achieved substitutional doping of ullazine with either two BO units or with one BO unit and one BN unit. The synthesis of these B-doped ullazines is straightforward, using demethylation and borylative cyclization as the key steps. Ullazine cores of both BN/BO-ullazines (2) and bis-BO-ullazines (3) are very close to being planar. Their electronic and photophysical properties were investigated by ultraviolet-visible, fluorescence spectroscopy, cyclic voltammetry, and density functional theory calculations.

Demonstrating the Impact of the Adsorbate Orientation on the Charge Transfer at Organic-Metal Interfaces

Charge-transfer processes at molecule-metal interfaces play a key role in tuning the charge injection properties in organic-based devices and thus, ultimately, the device performance. Here, the metal's work function and the adsorbate's electron affinity are the key factors that govern the electron transfer at the organic/metal interface. In our combined experimental and theoretical work, we demonstrate that the adsorbate's orientation may also be decisive for the charge transfer. By thermal cycloreversion of diheptacene isomers, we manage to produce highly oriented monolayers of the rodlike, electron-acceptor molecule heptacene on a Cu(110) surface with molecules oriented either along or perpendicular to the close-packed metal rows. This is confirmed by scanning tunneling microscopy (STM) images as well as by angle-resolved ultraviolet photoemission spectroscopy (ARUPS). By utilizing photoemission tomography momentum maps, we show that the lowest unoccupied molecular orbital (LUMO) is fully occupied and also, the LUMO + 1 gets significantly filled when heptacene is oriented along the Cu rows. Conversely, for perpendicularly aligned heptacene, the molecular energy levels are shifted significantly toward the Fermi energy, preventing charge transfer to the LUMO + 1. These findings are fully confirmed by our density functional calculations and demonstrate the possibility to tune the charge transfer and level alignment at organic-metal interfaces through the adjustable molecular alignment.