Comparison of cobalt and manganese in the chemistry of water oxidation

Synthesis, structural characterization, and DFT investigation of a mixed-valence Co(iii)/Co(ii) complex stabilized by supramolecular interactions

A dinuclear mixed-valence cobalt(iii/ii) complex, [(DMSO)(SCN)CoIIILCoII(NCS)2(OH2)]·DMF, has been synthesized and structurally characterized by elemental analysis, spectroscopy, and single-crystal X-ray diffraction. The structure reveals a hexa-coordinated cobalt(iii) center in an octahedral geometry and a penta-coordinated cobalt(ii) center adopting a square pyramidal geometry. To support the oxidation state assignment, a spin density analysis was carried out, confirming spin localization on the cobalt(ii) center. Additionally, a comprehensive DFT study was performed to evaluate key supramolecular interactions in the solid state. Theoretical analysis of selected assemblies using molecular electrostatic potential (MEP) mapping, QTAIM, and NCIplot methods reveals the energetic and directional features of dominant hydrogen bonds, including NH⋯S and OH⋯O interactions. The substantial interaction energies (up to -31.4 kcal mol-1) and topological descriptors underscore the structure-directing role of these noncovalent contacts in the formation of one-dimensional supramolecular chains.

Identification, Characterization, and Electronic Structures of Interconvertible Cobalt-Oxygen TAML Intermediates

The reaction of Li[(TAML)CoIII]·3H2O (TAML = tetraamido macrocyclic tetraanionic ligand) with iodosylbenzene at 253 K in acetone in the presence of redox-innocent metal ions (Sc(OTf)3 and Y(OTf)3) or triflic acid affords a blue species 1, which is converted reversibly to a green species 2 upon cooling to 193 K. The electronic structures of 1 and 2 have been determined by combining advanced spectroscopic techniques (X-band electron paramagnetic resonance (EPR), electron nuclear double resonance (ENDOR), X-ray absorption spectroscopy/extended X-ray absorption fine structure (XAS/EXAFS), and magnetic circular dichroism (MCD)) with ab initio theoretical studies. Complex 1 is best represented as an S = 1/2 [(Sol)(TAML•+)CoIII---OH(LA)]- species (LA = Lewis/Brønsted acid and Sol = solvent), where an S = 1 Co(III) center is antiferromagnetically coupled to S = 1/2 TAML•+, which represents a one-electron oxidized TAML ligand. In contrast, complex 2, also with an S = 1/2 ground state, is found to be multiconfigurational with contributions of both the resonance forms [(H-TAML)CoIV═O(LA)]- and [(H-TAML•+)CoIII═O(LA)]-; H-TAML and H-TAML•+ represent the protonated forms of TAML and TAML•+ ligands, respectively. Thus, the interconversion of 1 and 2 is associated with a LA-associated tautomerization event, whereby H+ shifts from the terminal -OH group to TAML•+ with the concomitant formation of a terminal cobalt-oxo species possessing both singlet (SCo = 0) Co(III) and doublet (SCo = 1/2) Co(IV) characters. The reactivities of 1 and 2 at different temperatures have been investigated in oxygen atom transfer (OAT) and hydrogen atom transfer (HAT) reactions to compare the activation enthalpies and entropies of 1 and 2.

Research on engineered electrocatalysts for efficient water splitting: a comprehensive review

Water electrolysis plays an interesting role toward hydrogen generation for overcoming global environmental crisis and solving the energy storage problem. However, there is still a deficiency of efficient electrocatalysts to overcome sluggish kinetics for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Great efforts have been employed to produce potential catalysts with low overpotential, rapid kinetics, and excellent stability for HER and OER. At present, hydrogen economy is driven by electrocatalysts with excellent characteristics; thus, systematic design strategy has become the driving force to exploit earth-abundant transition metal-based electrocatalysts toward H₂ economy. In this review, the recent progress on newer materials including metals, alloys, and transition metal oxides (manganese oxides, cobalt oxides, nickel oxides, PBA-derived metal oxides, and metal complexes) as photocatalysts/electrocatalysts has been overviewed together with some methodologies for efficient water splitting. Metal-organic framework (MOF)-based electrocatalysts have been highly exploited owing to their interesting functionalities. The photovoltaic-electrocatalytic (PV-EC) process focused on harvesting high solar-to-hydrogen efficiency (STH) among various solar energy conversion as well as storage systems. Electrocatalysts/photocatalysts with high efficiency have become an urgent need for overall water splitting. Also, cutting-edge achievements in the fabrication of electrocatalysts along with theoretical consideration have been discussed.

Trends and progress in application of cobalt-based materials in catalytic, electrocatalytic, photocatalytic, and photoelectrocatalytic water splitting

There has been a growing interest in water oxidation in recent two decades. Along with that, remarkable discovery of formation of a mysterious catalyst layer upon application of an anodic potential of 1.13 V vs. standard hydrogen electrode (SHE) to an inert indium tin oxide electrode immersed in phosphate buffer containing Co^(II) ions by Nocera et.al, has greatly attracted researchers interest. These researches have oriented in two directions; one focuses on obtaining better understanding of the reported mysterious catalyst layer, further modification, and improved performance, and the second approach is about designing coordination complexes of cobalt and investigating their properties toward the application in water splitting. Although there have been critical debates on true catalysts that are responsible for water oxidation in homogeneous systems of coordination complexes of cobalt, and the case is not totally closed, in this short review, our focus will be mainly on recent major progress and developments in the design and the application of cobalt oxide-based materials in catalytic, electrocatalytic, photocatalytic, and photoelectrocatalytic water oxidation reaction, which have been reported since pioneering report of Nocera in 2008 (Kanan Matthew and Nocera Daniel in Science 321:1072-1075, 2008).

Synthesis and characterization of a lactose-based biosurfactant by a novel nanodendritic catalyst and evaluating its efficacy as an emulsifier in a food emulsion system

Nonionic lactose fatty acid esters are a class of synthetic biosurfactants with various uses in the food, pharmaceutical, personal care, and cosmetic industries. The objective of this research was the preparation and full characterization of a series of novel metallic encapsulated magnetic core/dendrimer shell composites as catalysts (CoII/MnII G2.0L1/2@SCMBNP) and their use in the chemo- and regioselective synthesis of a biosurfactant for the first time. Surface-active properties (such as contact angle (CA), surface tension (SFT), interfacial tension (IFT), critical micelle concentration (CMC), hydrophilic-lipophilic balance (HLB), foamability (FA) & foam stability (FS), emulsion ability (EmA) & emulsion stability (EmS), surface excess (Γ) and free energy of adsorption (ΔG) were also determined for all synthesized biosurfactants. In comparison to other works, these results suggested that the synthesized lactose fatty acid esters have potential application as synthetic emulsifiers featuring surface properties and are comparable with Ryoto sugar ester L-1695 (sucrose laurate) & Tween-20 (polysorbate 20) as industrial emulsifiers. The optimized conditions for biosurfactant syntheses are 8 days at 2 : 1 molar ratio of lactose sugar to lauric acid at 50 °C. Lactose ester as a biosurfactant exhibited a decrease of SFT & IFT and was able to stabilize a 20% soybean O/W emulsion. Furthermore, high conversion & yield, excellent chemo- and regioselectivity, and high operational stability over 5 runs were achieved for CoII/MnII-G2.0L1/2@SCMBNP, indicating the suitable efficiency of the catalytic process.

Facile water oxidation by dinuclear mixed-valence CoIII/CoII complexes: the role of coordinated water

Rational design of a catalyst using earth abundant transition metals that can facilitate the smooth O-O bond formation is crucial for developing efficient water oxidation catalysts. The coordination environment around the metal ion of the catalyst plays a pivotal role in this context. We have chosen dinuclear mixed-valence Co^IIICo^II complexes of the general formula of [Co^IIICo^II(LH₂)₂(X)(H₂O)] (X = OAc or Cl) which bear a coordinated water molecule in the primary coordination sphere. We anticipated that the water molecule in the primary sphere can take part in the proton coupled electron transfer (PCET) mechanism which can accelerate the facile formation of the O-O bond under strong alkaline conditions (1 M NaOH). To understand the role of the coordinated water molecule we have generated an analogous complex, [Co^IIICo^II(LH₂)₂(o-vanillin)] (o-vanillin = 2-hydroxy-3-methoxybenzaldehyde), without coordinated water. Interestingly, we have found that the water coordinated complexes show better oxygen evolution reaction (OER) activity and stability.

A tetranuclear cobalt(ii) phosphate possessing a D4R core: an efficient water oxidation catalyst

The reaction of Co(OAc)2·4H2O with a sterically hindered phosphate ester, LH2, afforded a tetranuclear complex, [CoII(L)(CH3CN)]4·5CH3CN (1) [LH2 = 2,6-(diphenylmethyl)-4-isopropyl-phenyl phosphate]. The molecular structure of 1 reveals that it is a tetranuclear assembly where the Co(ii) centers are present in the alternate corners of a cube. The four Co(ii) centers are held together by four di-anionic [L]2- ligands. The fourth coordination site on Co(ii) is taken by an acetonitrile ligand. Changing the Co(ii) precursor from Co(OAc)2·4H2O to Co(NO3)2·6H2O afforded a mononuclear complex [CoII(LH)2(CH3CN)2(MeOH)2](MeOH)2 (2). In 2, the Co(ii) centre is surrounded by two monoanionic [LH]- ligands and a pair of methanol and acetonitrile solvents in a six-coordinate arrangement. 1 has been found to be an efficient catalyst for electrochemical water oxidation under highly basic conditions while the mononuclear analogue, 2, does not respond to electrochemical water oxidation. The tetranuclear catalyst has excellent electrochemical stability and longevity, as established by chronoamperometry and >1000 cycle durability tests under highly alkaline conditions. Excellent current densities of 1 and 10 mA cm-2 were achieved with overpotentials of 354 and 452 mV respectively. The turnover frequency of this catalyst was calculated to be 5.23 s-1 with an excellent faradaic efficiency of 97%, indicating the selective oxygen evolution reaction (OER) occurring with the aid of this catalyst. A mechanistic insight into the higher activity of complex 1 towards the OER compared to that of complex 2 is also provided using density functional theory based calculations.

Evolution of metal organic frameworks as electrocatalysts for water oxidation

The development of metal organic framework based water oxidation catalysts is discussed here in connection with various design strategies.

Evaluation of contaminants spreading from sludge piles, applying geochemical fractionation and attenuation of concentrations model in a tropical reservoir

Drinking water production may generate significant amounts of sludge, which may be contaminated with various metals. For the first time, the mobility/lability of contaminants from two water treatment sludge piles in the Juturnaíba Reservoir was evaluated by applying two geochemical approaches: sequential extractions and attenuation of concentrations model. Both procedures were applied to evaluate the mobility/lability of Al, Cr, Cu, Fe, Mn, and Zn on samples collected in the sludge piles and in the neighborhood of both water treatment plants. The results show that aluminum presents considerably higher concentrations in the sediments close to the sludge piles, with more labile phases; however, the attenuation of concentrations model indicates little spreading of this contaminant in the reservoir. Manganese was shown to be severely depleted in the sludge, indicating that it can be leached away, due to the reducing conditions of the pile. The other elements showed low concentrations and were shown not to affect the concentrations in the reservoir. While the geochemical fractionation indicates the possibility of dissolution to the water column, the attenuation of concentrations model gives information on the spatial dispersion of the contaminants, constituting interesting complementary approaches.

A Cu2Se-Cu2O film electrodeposited on titanium foil as a highly active and stable electrocatalyst for the oxygen evolution reaction

Many nonprecious metal-selenide-based materials have been reported as electrocatalysts with high activity for the oxygen evolution reaction (OER). Herein, a hybrid catalyst film composed of Cu2Se and Cu2O nanoparticles directly grown on Ti foil (Cu2Se-Cu2O/TF) was prepared through a simple and fast cathodic electrodeposition method. Surprisingly, this electrode required a relatively low overpotential of 465 mV to achieve a catalytic current density of 10 mA cm-2 for the OER in 0.2 M carbonate buffer (pH = 11.0). Furthermore, a long-term constant current electrolysis test confirmed the high durability of the Cu2Se-Cu2O/TF anode at a current density of 10 mA cm-2 over 20 h. The XRD, TEM and XPS analysis of the sample after the OER indicated that a CuO protective layer formed on the surface of the Cu2Se-Cu2O catalyst, which effectively suppressed further oxidation of the Cu2Se-Cu2O catalyst during the OER and resulted in sustained catalytic oxidation of water.

Electrochemical water oxidation using a copper complex

This study highlights the importance of proton coupled electron transfer (PCET) during electrochemical-driven water oxidation catalysis employing a copper complex.

Direct Synthesis of Two Inorganic Catalysts on Carbon Fibres for the Electrocatalytic Oxidation of Water

Two electrodes for anodic water oxidation made by direct synthesis of inorganic catalysts onto conductive carbon fibre sheets are evaluated. As catalysts two Co- and Sb-containing phases were tested, that is, Co₃ Sb₄ O₆ F₆ and the new compound CoSbO₄ . The compounds express large differences in their morphology: CoSbO₄ grows as thin needles whereas Co₃ Sb₄ O₆ F₆ grows as larger facetted crystals. Despite the smaller surface area the latter compound shows a better catalytic performance. When the compound Co₃ Sb₄ O₆ F₆ was used it gave a low increase of +0.028 mV h^-1 at an overpotential of η=472 mV after 10 h and a stability of +0.48 mV h^-1 at an overpotential of η=488 mV after 60 h. The leakages of Co and Sb were negligible and only <0.001 at % Co and approximately 0.02 at % Sb were detected in the electrolyte.

Adjusting the Crystallinity of Mesoporous Spinel CoGa2O4 for Efficient Water Oxidation

Effective and stable electrocatalysts (ECs) are of great importance for the modification of semiconductor (SC) photoanodes, to achieve efficient photoelectrochemical (PEC) water splitting. Herein we demonstrate that the low-crystallinity mesoporous spinel CoGa2O4 oxygen evolution catalyst (OEC), exhibiting excellent bulk electrocatalytic stability and activity for oxygen-evolving reaction (OER), obviously improved water oxidization on a-Fe2O3 photoanode. Low crystallinity not only balances the stability and activity for ECs themselves but facilitates formation of adjustable Schottky junctions between ECs and SCs. Those would contribute to surface state passivation and photogenerated hole extraction, leading to lower onset potential and larger photocurrent. Thus, our finding suggests that low crystallinity could serve as a beneficial feature of ECs to achieve efficient PEC water splitting, owing to its preponderant tendency for the improvement of interface reaction kinetics.

A self-assembled, multicomponent water oxidation device

Langmuir-Blodgett (LB) and drop-cast (DC) films prepared from [Ru(1)3][PF6]2 and Co4POM (1= 4,4'-bis((n)nonyl)-2,2'-bipyridine, Co4POM = K10[Co4(H2O)2(α-PW9O34)2]) have been evaluated as water oxidation catalysts and their electrocatalytic performances are reported; DC films evolve more O2 per unit area than LB films and the catalyst is stable on an FTO surface for ≈500-600 minutes.

A transition metal oxofluoride offering advantages in electrocatalysis and potential use in applications

The recently described solid solution (Co,Ni,Mn)₃Sb₄O₆F₆has proved stable and efficient as a catalyst for electrocatalytic water oxidation. The end component Co₃Sb₄O₆F₆was found to be most efficient, maintaining a current density ofj= 10 mA cm⁻²at an overpotential of 443 mV with good capability. At this current density, O₂and H₂were produced in the ratio 1 : 2 without loss of faradaic current against a Pt-cathode. A morphological change in the crystallite surface was observed after 0.5 h, however, even after 64.5 h, the overall shape and size of the small crystallites were unaffected and the electrolyte contained only 0.02 at% Co. It was also possible to conclude fromin situEXAFS measurements that the coordination around Co did not change. The oxofluorides express both hydrophilic and hydrophobic surface sites, incorporate a flexible metalloid element and offer the possibility of a mechanism that differs from other inorganic catalytic pathways previously described.

Ultrafine CoP Nanoparticles Supported on Carbon Nanotubes as Highly Active Electrocatalyst for Both Oxygen and Hydrogen Evolution in Basic Media

The development of low-cost and highly active electrocatalysts for two half reactions: H2 and O2 evolution reactions (HER and OER), is still a huge challenge to realize water splitting. Herein, we report that CoP nanoparticles (NPs) can act as a bifunctional catalyst for both HER and OER. Particularly, ultrafine CoP NPs decorated on N-doped multiwalled carbon nanotube (MWCNT) exhibit remarkable catalytic performance for OER in 0.1 M NaOH aqueous solution, with a low onset overpotential of 290 mV, a Tafel slope of 50 mV dec(-1), an overpotential (η) of 330 mV at 10 mA cm(-2), and approximately 100% Faradaic efficiency, paralleling the performance of state-of-the-art Co-based OER catalysts including Co3O4, CoSe2, and Co-Pi. The hybrid catalyst is capable of maintaining a high catalytic current density for at least 10 h without any loss of catalytic activity. Meanwhile, the noble-metal-free catalyst also shows good activity and duarability for HER under the same basic condition.

Copper-Intercalated Birnessite as a Water Oxidation Catalyst

We report a synthetic method to increase the catalytic activity of birnessite toward water oxidation by intercalating copper in the interlayer region of the layered manganese oxide. Intercalation of copper, verified by XRD, XPS, ICP, and Raman spectroscopy, was accomplished by exposing a suspension of birnessite to a Cu(+)-bearing precursor molecule that underwent disproportionation in solution to yield Cu(0) and Cu(2+). Electrocatalytic studies showed that the Cu-modified birnessite exhibited an overpotential for water oxidation of ∼490 mV (at 10 mA/cm(2)) and a Tafel slope of 126 mV/decade compared to ∼700 mV (at 10 mA/cm(2)) and 240 mV/decade, respectively, for birnessite without copper. Impedance spectroscopy results suggested that the charge transfer resistivity of the Cu-modified sample was significantly lower than Cu-free birnessite, suggesting that Cu in the interlayer increased the conductivity of birnessite leading to an enhancement of water oxidation kinetics. Density functional theory calculations show that the intercalation of Cu(0) into a layered MnO2 model structure led to a change of the electronic properties of the material from a semiconductor to a metallic-like structure. This conclusion from computation is in general agreement with the aforementioned impedance spectroscopy results. X-ray photoelectron spectroscopy (XPS) showed that Cu(0) coexisted with Cu(2+) in the prepared Cu-modified birnessite. Control experiments using birnessite that was decorated with only Cu(2+) showed a reduction in water oxidation kinetics, further emphasizing the importance of Cu(0) for the increased activity of birnessite. The introduction of Cu(0) into the birnessite structure also increased the stability of the electrocatalyst. At a working current of 2 mA, the Cu-modified birnessite took ∼3 times longer for the overpotential for water oxdiation to increase by 100 mV compared to when Cu was not present in the birnessite.

Reversible adapting layer produces robust single-crystal electrocatalyst for oxygen evolution

Electrochemically converting water into oxygen/hydrogen gas is ideal for high-density renewable energy storage in which robust electrocatalysts for efficient oxygen evolution play crucial roles. To date, however, electrocatalysts with long-term stability have remained elusive. Here we report that single-crystal Co₃O₄ nanocube underlay with a thin CoO layer results in a high-performance and high-stability electrocatalyst in oxygen evolution reaction. An in situ X-ray diffraction method is developed to observe a strong correlation between the initialization of the oxygen evolution and the formation of active metal oxyhydroxide phase. The lattice of skin layer adapts to the structure of the active phase, which enables a reversible facile structural change that facilitates the chemical reactions without breaking the scaffold of the electrocatalysts. The single-crystal nanocube electrode exhibits stable, continuous oxygen evolution for >1,000 h. This robust stability is attributed to the complementary nature of defect-free single-crystal electrocatalyst and the reversible adapting layer.

There is extensive research into water-oxidation electrocatalysts which exhibit long-term stability. Here, the authors report a single-crystal cobalt oxide electrocatalyst displaying high activity and stability, and develop an in situ X-ray diffraction method to probe the structure–activity relationship.

Impact of Electrocatalyst Activity and Ion Permeability on Water-Splitting Photoanodes

Electrocatalyst (EC)-modified semiconductor (SC) photoelectrodes are key elements of solar water-splitting systems. The SC|EC interface affects the composite photoelectrode behavior but is poorly understood. We uncover the role of EC activity and SC|EC interface properties using a range of metal (Ni, Fe, Ni-Fe, Co, Ir) oxide or (oxy)hydroxide ECs deposited on model single-crystal n-TiO2 photoanodes. The impedance and photoelectrochemical response of the system was nearly independent of EC oxygen evolution activity if the catalyst was deposited electrochemically as an ion-permeable (oxy)hydroxide or hydrous oxide. When dense oxides (e.g., ion-impermeable) ECs were used, the response depended strongly on the EC. These data demonstrate that the EC and SC interface structures are more important than the EC activity in determining the composite photoanode response, confirming recent SC|EC interface simulations for ion-permeable ECs. These results thus inform the design of high-performance water-oxidizing photoanodes with direct SC|EC interfaces.

Uncovering structure-activity relationships in manganese-oxide-based heterogeneous catalysts for efficient water oxidation

Artificial photosynthesis by harvesting solar light into chemical energy could solve the problems of energy conversion and storage in a sustainable way. In nature, CO2 and H2 O are transformed into carbohydrates by photosynthesis to store the solar energy in chemical bonds and water is oxidized to O2 in the oxygen-evolving center (OEC) of photosystem II (PS II). The OEC contains CaMn4 O5 cluster in which the metals are interconnected through oxido bridges. Inspired by biological systems, manganese-oxide-based catalysts have been synthesized and explored for water oxidation. Structural, functional modeling, and design of the materials have prevailed over the years to achieve an effective and stable catalyst system for water oxidation. Structural flexibility with eg(1) configuration of Mn(III) , mixed valency in manganese, and higher surface area are the main requirements to attain higher efficiency. This Minireview discusses the most recent progress in heterogeneous manganese-oxide-based catalysts for efficient chemical, photochemical, and electrochemical water oxidation as well as the structural requirements for the catalyst to perform actively.

Enhancing catalytic activity by narrowing local energy gaps--X-ray studies of a manganese water oxidation catalyst

Changes in the local electronic structure of the Mn 3d orbitals of a Mn catalyst derived from a dinuclear Mn(III) complex during the water oxidation cycle were investigated ex situ by X-ray absorption spectroscopy (XAS) and resonant inelastic X-ray scattering (RIXS) analyses. Detailed information about the Mn 3d orbitals, especially the local HOMO-LUMO gap on Mn sites revealed by RIXS analyses, indicated that the enhancement in catalytic activity (water oxidation) originated from the narrowing of the local HOMO-LUMO gap when electrical voltage and visible light illumination were applied simultaneously to the Mn catalytic system.

Metal-free organic sensitizers for use in water-splitting dye-sensitized photoelectrochemical cells

Solar fuel generation requires the efficient capture and conversion of visible light. In both natural and artificial systems, molecular sensitizers can be tuned to capture, convert, and transfer visible light energy. We demonstrate that a series of metal-free porphyrins can drive photoelectrochemical water splitting under broadband and red light (λ > 590 nm) illumination in a dye-sensitized TiO2 solar cell. We report the synthesis, spectral, and electrochemical properties of the sensitizers. Despite slow recombination of photoinjected electrons with oxidized porphyrins, photocurrents are low because of low injection yields and slow electron self-exchange between oxidized porphyrins. The free-base porphyrins are stable under conditions of water photoelectrolysis and in some cases photovoltages in excess of 1 V are observed.

Cobalt-manganese-based spinels as multifunctional materials that unify catalytic water oxidation and oxygen reduction reactions

Recently, there has been much interest in the design and development of affordable and highly efficient oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) catalysts that can resolve the pivotal issues that concern solar fuels, fuel cells, and rechargeable metal-air batteries. Here we present the synthesis and application of porous CoMn2 O4 and MnCo2 O4 spinel microspheres as highly efficient multifunctional catalysts that unify the electrochemical OER with oxidant-driven and photocatalytic water oxidation as well as the ORR. The porous materials were prepared by the thermal degradation of the respective carbonate precursors at 400 °C. The as-prepared spinels display excellent performances in electrochemical OER for the cubic MnCo2 O4 phase in comparison to the tetragonal CoMn2 O4 material in an alkaline medium. Moreover, the oxidant-driven and photocatalytic water oxidations were performed and they exhibited a similar trend in activity to that of the electrochemical OER. Remarkably, the situation is reversed in ORR catalysis, that is, the oxygen reduction activity and stability of the tetragonal CoMn2 O4 catalyst outperformed that of cubic MnCo2 O4 and rivals that of benchmark Pt catalysts. The superior catalytic performance and the remarkable stability of the unifying materials are attributed to their unique porous and robust microspherical morphology and the intrinsic structural features of the spinels. Moreover, the facile access to these high-performance materials enables a reliable and cost-effective production on a large scale for industrial applications.