On glucose diffusivity of tissue engineering membranes and scaffolds

Characterization of Decellularized Plant Leaf as an Emerging Biomaterial Platform

Decellularized plants have emerged as promising biomaterials for cell culture and tissue engineering applications due to their distinct material characteristics. This study explores the biochemical, mechanical, and structural properties of decellularized leaves that make them useful as biomaterials for cell culture. Five monocot leaf species were decellularized via alkali treatment, resulting in the effective removal of DNA and proteins. The Van Soest method was used to quantitatively evaluate the changes in cellulose, hemicellulose, and lignin content during decellularization. Tensile tests revealed considerable variations in mechanical strength depending on the plant species, the decellularization state, and the direction of applied mechanical force. Decellularized monocot leaves exhibited a notable reduction in mechanical strength and anisotropic properties depending on the leaf orientation. Imaging revealed inherent microgrooves on the epidermis of the monocot leaves. Permeability studies, including water uptake and biomolecule transport through decellularized leaves, confirmed excellent water uptake capability but limited biomolecule transport. Lastly, the plants were enzymatically degradable using typical plant enzymes, which were minimally cytotoxic to mammalian cells. Taken together, the features of decellularized plant leaves characterized in this study suggest ways in which they can be useful in cell culture and tissue engineering applications.

Design and development of in-vitro co-culture device for studying cellular crosstalk in varied tissue microenvironment

Despite of being in different microenvironment, breast cancer cells influence the bone cells and persuade cancer metastasis from breast to bone. Multiple co-culture approaches have been explored to study paracrine signaling between these cells and to study the progression of cancer. However, lack of native tissue microenvironment remains a major bottleneck in existing co-culture technologies. Therefore, in the present study, a tumorigenic and an osteogenic microenvironment have been sutured together to create a multi-cellular environment and has been appraised to study cancer progression in bone tissue. The PCL-polystyrene and PCL-collagen fibrous scaffolds were characterized for tumorigenic and osteogenic potential induction on MDA-MB-231 and MC3T3-E1 cells respectively. Diffusion ability of crystal violet, glucose, and bovine serum albumin across the membrane were used to access the potential paracrine interaction facilitated by device. While in co-cultured condition, MDA-MB-231 cells showed EMT phenotype along with secretion of TNFα and PTHrP which lower down the expression of osteogenic markers including alkaline phosphatase, RUNX2, Osteocalcin and Osteoprotegerin. The cancer progression in bone microenvironment demonstrated the role and necessity of creating multiple tissue microenvironment and its contribution in studying multicellular disease progression and therapeutics.

Design, synthesis and biological evaluation of glucose metabolism inhibitors as anticancer agents

Compared to normal cells, tumour cells exhibit an upregulation of glucose transporters and an increased rate of glycolytic activity. In previous research, we successfully identified a promising hit compound BH10 through a rigorous screening process, which demonstrates a potent capacity for inhibiting cancer cell proliferation by targeting glucose metabolism. In the current study, we identify Kelch-like ECH-associated protein 1 (Keap1) as a potential protein target of BH10via avidin pull-down assays with biotinylated-BH10. Subsequently, we present a comprehensive analysis of a series of BH10 analogues characterized by the incorporation of a naphthoimidazole scaffold and the introduction of a triazole ring with diverse terminal functional groups. Notably, compound 4d has emerged as the most potent candidate, exhibiting better anti-cancer activities against HEC1A cancer cells with an IC50 of 2.60 μM, an extended biological half-life, and an improved pharmacokinetic profile (compared to BH10) in mice.

Computational model of the cancer necrotic core formation in a tumor-on-a-chip device

The mechanisms underlying the formation of necrotic regions within avascular tumors are complex and poorly understood. In this paper, we investigate the formation of a necrotic core in a 3D tumor cell culture within a microfluidic device, considering oxygen, nutrients, and the microenvironment acidification by means of a computational-mathematical model. Our objective is to simulate cell processes, including proliferation and death inside a microfluidic device, according to the microenvironmental conditions. We employed approximation utilizing finite element models taking into account glucose, oxygen, and hydrogen ions diffusion, consumption and production, as well as cell proliferation, migration and death, addressing how tumor cells evolve under different conditions. The resulting mathematical model was examined under different scenarios, being capable of reproducing cell death and proliferation under different cell concentrations, and the formation of a necrotic core, in good agreement with experimental data reported in the literature. This approach not only advances our fundamental understanding of necrotic core formation but also provides a robust computational platform to study personalized therapeutic strategies, offering an important tool in cancer research and treatment design.

Microvascular network based on the Hilbert curve for nutrient transport in thick tissue

To address the uneven nutrient distribution within three-dimensional (3D) tissue models and organoids currently used in medical research, this study introduces a microvascular network based on the Hilbert curve. Our aim was to develop innovative solutions for enhancing nutrient supply in thick tissue models in vitro. By using 3D bioprinting, we engineered microvascular networks of varying Hilbert orders and validated their efficacy in enhancing nutrient uniformity through numerical simulations and experiments. These networks facilitated broader and more uniform nutrient distribution throughout the thick tissue models, particularly the 2° Hilbert microvascular structure, which occupies less space and significantly reduces regions of cellular death. Furthermore, we explored the potential of assembling larger tissue constructs using the 2° Hilbert microvascular network, showcasing its applicability in constructing large-scale biological models. The findings suggest that the 2° Hilbert microvascular structure is particularly effective in ensuring adequate nutrient delivery, thus enhancing the viability and functionality of large-volume tissue models. These innovations hold significant promise for advancing the fields of tissue engineering and regenerative medicine by improving nutrient delivery to in vitro thick tissue block models. This provides a robust foundation for future in vitro research and clinical applications, potentially leading to more effective treatments and interventions in the medical field. The development of these microvascular networks represents a crucial step forward in overcoming the limitations of current 3D tissue models and organoids, paving the way for more sophisticated and reliable biomedical research tools.

A novel on-a-chip system with a 3D-bioinspired gut mucus suitable to investigate bacterial endotoxins dynamics

The possible pathogenic impact of pro-inflammatory molecules produced by the gut microbiota is one of the hypotheses considered at the basis of the biomolecular dialogue governing the microbiota-gut-brain axis. Among these molecules, lipopolysaccharides (LPS) produced by Gram-negative gut microbiota strains may have a potential key role due to their toxic effects in both the gut and the brain. In this work, we engineered a new dynamic fluidic system, the MINERVA device (MI-device), with the potential to advance the current knowledge of the biological mechanisms regulating the microbiota-gut molecular crosstalk. The MI-device supported the growth of bacteria that are part of the intestinal microbiota under dynamic conditions within a 3D moving mucus model, with features comparable to the physiological conditions (storage modulus of 80 ± 19 Pa, network mesh size of 41 ± 3 nm), without affecting their viability (∼ 109 bacteria/mL). The integration of a fluidically optimized and user-friendly design with a bioinspired microenvironment enabled the sterile extraction and quantification of the LPS produced within the mucus by bacteria (from 423 ± 34 ng/mL to 1785 ± 91 ng/mL). Compatibility with commercially available Transwell-like inserts allows the user to precisely control the transport phenomena that occur between the two chambers by selecting the pore density of the insert membrane without changing the design of the system. The MI-device is able to provide the flow of sterile medium enriched with LPS directly produced by bacteria, opening up the possibility of studying the effects of bacteria-derived molecules on cells in depth, as well as the assessment and characterization of their effects in a physiological or pathological scenario.

Bioinspired in vitro intestinal mucus model for 3D-dynamic culture of bacteria

The intestinal mucus is a biological barrier that supports the intestinal microbiota growth and filters molecules. To perform these functions, mucus possesses optimized microstructure and viscoelastic properties and it is steadily replenished thus flowing along the gut. The available in vitro intestinal mucus models are useful tools in investigating the microbiota-human cells interaction, and are used as matrices for bacterial culture or as static component of microfluidic devices like gut-on-chips. The aim of this work is to engineer an in vitro mucus models (I-Bac3Gel) addressing in a single system physiological viscoelastic properties (i.e., 2-200 Pa), 3D structure and suitability for dynamic bacterial culture. Homogeneously crosslinked alginate hydrogels are optimized in composition to obtain target viscoelastic and microstructural properties. Then, rheological tests are exploited to assess a priori the hydrogels capability to withstand the flow dynamic condition. We experimentally assess the suitability of I-Bac3Gels in the evolving field of microfluidics by applying a dynamic flow to a bacterial-loaded mucus model and by monitoring E. coli growth and survival. The engineered models represent a step forward in the modelling of the mucus, since they can answer to different urgent needs such as a 3D structure, bioinspired properties and compatibility with dynamic system.

Innovations in lymph node targeting nanocarriers

Lymph nodes are secondary lymphoid tissues in the body that facilitate the co-mingling of immune cells to enable and regulate the adaptive immune response. They are also tissues implicated in a variety of diseases, including but not limited to malignancy. The ability to access lymph nodes is thus attractive for a variety of therapeutic and diagnostic applications. As nanotechnologies are now well established for their potential in translational biomedical applications, their high relevance to applications that involve lymph nodes is highlighted. Herein, established paradigms of nanocarrier design to enable delivery to lymph nodes are discussed, considering the unique lymph node tissue structure as well as lymphatic system physiology. The influence of delivery mechanism on how nanocarrier systems distribute to different compartments and cells that reside within lymph nodes is also elaborated. Finally, current advanced nanoparticle technologies that have been developed to enable lymph node delivery are discussed.

3D-Reactive printing of engineered alginate inks

Alginate is a common component of bioinks due to its well-described ionic crosslinking mechanism and tunable viscoelastic properties. Extrusion-based 3D-printing of alginate inks requires additives, such as gelatin and Pluronic, pre- or post-printing crosslinking processes and/or coextrusion with crosslinkers. In this work, we aim to develop a different printing approach for alginate-based inks, introducing 3D-reactive printing. Indeed, the control over the crosslinking kinetics and the printing time allowed printing different inks while maintaining their final composition unaltered to identify a suitable formulation in terms of printability. Alginate solutions were crosslinked with insoluble calcium salts (CaCO₃) inducing a dynamic modification of their microstructure and viscoelastic properties over time. The monitoring of fiber printability and internal microstructure, at different time points of ink gelation, was performed by means of a well-defined set of rheological tests to obtain a priori ink properties for the a posteriori 3D-printing process. This new perspective allowed 3D-reactive printing of alginate fibers with predetermined properties, without involving post-extrusion crosslinking steps and additives.

Effects of Scaffold Pore Morphologies on Glucose Transport Limitations in Hollow Fibre Membrane Bioreactor for Bone Tissue Engineering: Experiments and Numerical Modelling

In the current research, three electrospun polycaprolactone (PCL) scaffolds with different pore morphology induced by changing the electrospinning parameters, spinning time and rate, have been prepared in order to provide a fundamental understanding on the effects pore morphology have on nutrient transport behaviour in hollow fibre membrane bioreactor (HFMB). After determining the porosity of the scaffolds, they were investigated for glucose diffusivity using cell culture media (CCM) and distilled water in a diffusion cell at 37 °C. The scanning electron microscope (SEM) images of the microstructure of the scaffolds were analysed further using ImageJ software to determine the porosity and glucose diffusivity. A Krogh cylinder model was used to determine the glucose transport profile with dimensionless variables within the HFMB. The paper discusses the roles of various dimensionless numbers (e.g., Péclet and Damköhler numbers) and non-dimensional groups of variables (e.g., non-dimensional fibre radius) on determining glucose concentration profiles, especially in the scaffold region. A negative linear relationship between glucose diffusivities across PCL scaffolds and the minimum glucose concentrations (i.e., concentration on the outer fibre edge on the outlet side (at z = 1 and r = 3.2) was also found. It was shown that the efficiency of glucose consumption improves with scaffolds of higher diffusivities. The results of this study are expected to help in optimizing designs of HFMB as well as carry out more accurate up scaling analyses for the bioreactor.

Finite Element Analysis of Glucose Diffusivity in Cellulose Nanofibril Peripheral Nerve Conduits

Peripheral neuropathy arising from physical trauma is estimated to afflict 20 million people in the United States alone. In one common surgical intervention, neural conduits are placed over the nerve stumps to bridge the gap and create a microenvironment conducive to regeneration. It has been proposed that a biocompatible material such as cellulose nanofiber may serve as a viable conduit material, providing a non-inflammatory and mechanically stable system. Preliminary studies have shown that cellulose nanofiber conduits successfully aid neural regeneration and further, that the dimensions of the conduit relative to the nerve gap have an impact on efficacy in murine models. It has been hypothesized that the reliance of regeneration upon the physical dimensions of the conduit may be related to modified modes of diffusion and/or distances of key cellular nutrients and waste metabolites to/from the injury site. The present work investigates the concentration profile of glucose within the conduit via finite element analysis as a function of the physical dimensions of the conduit. It was determined that the magnitude of glucose diffusion was greater through the conduit walls than through the luminal space between the nerve and the inner wall of the conduit, and that as such radial diffusion is dominant over axial diffusion.

Nylon mesh-based 3D scaffolds for the adherent culture of neural stem/progenitor cells

We developed novel scaffolds for the adherent culture of neural stem/progenitor cells on the woven mesh. Nylon mesh (NM) is an inert material for cell adhesion. We prepared polyacrylic acid-grafted nylon mesh (PAA-NM) by graft polymerization method using gamma-irradiation. Matrigel was covalently immobilized to the carboxyl groups in PAA-NM by chemical conjugation using 1-ethyl-3-(3-dimethylamino propyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS) to prepare the Matrigel-immobilized PAA-grafted nylon mesh (M-PAA-NM). Cell adhesion property of mouse neural stem/progenitor cells (NSPCs) between the NM, PAA-NM, and M-PAA-NM was different from each other. The neurosphere-like clusters of NSPCs were weakly bound to NM and PAA-NM without spreading. The NSPCs were firmly adhered to, spread, and covered the surface of M-PAA-NM. We evaluated the state of differentiation by quantitative reverse transcriptase-polymerase chain reaction (RT-PCR) and immnocytochemistry. A neuronal marker β III tubulin, a glial marker glial fibrillary acidic protein (GFAP) and a mature glial marker S100β were expressed at a low level in the cultured cells while immature NSPCs marker Nestin and Sox2 were slightly lower without significant statistical difference. We concluded that the M-PAA-NM is a good substrate for adherent culture of NSPCs without triggering their cell differentiation, and also provides the maintenance of their growth with fewer passages in comparison with the conventional suspension culture of NSPCs in neurospheres.

The application of three-dimensional cell culture in clinical medicine

Three-dimensional cell culture technology is a novel cell culture technology, which can simulate the growth state of cells in vivo by scaffolds or special devices. Cells can form tissues or organs in vitro. It combines some advantages of traditional cell experiments and animal model experiments. Because of its advantages, it is widely used in clinical medical research, including research on stem cell differentiation, research on cell behavior, migration and invasion, study on microenvironment, study on drug sensitivity and radio-sensitivity of tumor cells, etc. In this paper, the evolution and classification of three-dimensional cell culture are reviewed, also the advantages and shortages are compared. The application of three-dimensional cell culture in clinical medicine are summarized to provide an insight into translational medicine.

Scale and structure dependent solute diffusivity within microporous tissue engineering scaffolds

Diffusion of nutrients to cells cultured within three-dimensional scaffolds is fundamental for cell survival during development of the tissue construct, when no vasculature is present to aid transport. Significant efforts have been made to characterize the effect of structure on solute diffusivity in nanoporous hydrogels, yet a similar thorough characterization has not been attempted for microporous scaffolds. Here, we make use of freeze-dried collagen scaffolds, possessing pore sizes in the range 150-250 μm and isotropic or aligned morphology, to study the diffusivity of fluorescent dextran molecules. Fluorescence recovery after photobleaching is used to measure the self diffusivity of the solutes within single pores, while Fickian diffusion over scales larger than the pore size is studied by assessing the solute concentration profile within the materials over time. We show that, not only do the morphological parameters of the scaffolds significantly affect the diffusivity of the solutes, but also that the assessment of such diffusivity depends on the length scale of diffusion of the molecules under investigation, with the resulting diffusion coefficients being differently affected by the scaffold structure. The results provided can guide the design of scaffolds with tailored diffusivity and nutrient concentration profiles.

Spatiotemporal pattern of glucose in a microfluidic device depend on the porosity and permeability of the medium: A finite element study

BACKGROUND

Glucose plays an important role as a source of nutrients and influence cellular processes such as differentiation, proliferation and migration. In vitro models based on microfluidic devices represent an alternative to study several biological processes in a more reproducible and controllable method compared to in vivo models. Glucose concentration across a microfluidic chip and its behavior in experimental conditions is not completely understood.

OBJECTIVE

This paper investigated the spatiotemporal distribution of glucose across the hydrogel inside a microfluidic chip. The influence of different parameters, boundary and initial conditions of experiments on glucose concentration was studied.

METHODS

A finite element model using a two dimensional geometry was developed. With this model, patterns of glucose concentration were investigated for different combinations of flow rate of culture medium, permeability and porosity of the medium. Patterns were also studied for two hydrogels made of collagen type I and fibrin with different initial and boundary conditions for pressure and glucose concentration.

RESULTS

Porosity influenced significantly on the chemical gradients generated when interstitial fluid flow was null or neglectable. A difference in concentration lower than 15% was obtained at the input of microchamber and after 90 min, when porosity changed from 0.5 to 0.99. In addition, no significant effects of modifications in permeability were observed. Regarding the collagen and fibrin matrices, in the presence of a pressure gradient of 40 Pa, the permeability significantly influenced on the concentration gradients generated.

CONCLUSIONS

Porosity influences importantly on patterns when diffusion is the main transport mechanism. Permeability is the most influencing parameter when a fluid flow is present. Common insertion rates of culture medium does not significantly modify the patterns of glucose inside the chips. Thus, new experiments must consider the impact of such parameters on the distribution and the time span that nutrients occupy the medium. To better contribute with experimental trials, other studies involving cell-cell and cell-extracellular matrix interactions, and different chip geometries should be developed. The results of the present work could assist to develop specific systems for experimentation, to design new experiments and to improve the analysis of the obtained results.

Agent-based model of multicellular tumor spheroid evolution including cell metabolism

Computational models aiming at the spatio-temporal description of cancer evolution are a suitable framework for testing biological hypotheses from experimental data, and generating new ones. Building on our recent work (J. Theor. Biol. 389, 146 (2016)) we develop a 3D agent-based model, capable of tracking hundreds of thousands of interacting cells, over time scales ranging from seconds to years. Cell dynamics is driven by a Monte Carlo solver, incorporating partial differential equations to describe chemical pathways and the activation/repression of "genes", leading to the up- or down-regulation of specific cell markers. Each cell-agent of different kind (stem, cancer, stromal etc.) runs through its cycle, undergoes division, can exit to a dormant, senescent, necrotic state, or apoptosis, according to the inputs from its systemic network. The basic network at this stage describes glucose/oxygen/ATP cycling, and can be readily extended to cancer-cell specific markers. Eventual accumulation of chemical/radiation damage to each cell's DNA is described by a Markov chain of internal states, and by a damage-repair network, whose evolution is linked to the cell systemic network. Aimed at a direct comparison with experiments of tumorsphere growth from stem cells, the present model will allow to quantitatively study the role of transcription factors involved in the reprogramming and variable radio-resistance of simulated cancer-stem cells, evolving in a realistic computer simulation of a growing multicellular tumorsphere.

Biocompatibility Assessment of Conducting PANI/Chitosan Nanofibers for Wound Healing Applications

As electroactive polymers have recently presented potential in applications in the tissue engineering and biomedical field, this study is aiming at the fabrication of composite nanofibrous membranes containing conducting polyaniline and at the evaluation of their biocompatibility. For that purpose, conducting polyaniline–chitosan (PANI/CS) defect free nanofibres of different ratios (1:3; 3:5 and 1:1) were produced with the electrospinning method. They were characterized as for their morphology, hydrophilicity and electrical conductivity. The membranes were then evaluated for their cellular biocompatibility in terms of cell attachment, morphology and cell proliferation. The effect of the PANI content on the membrane properties is discussed. Increase in PANI content resulted in membranes with higher hydrophobicity and higher electrical conductivity. It was found that none of the membranes showed any toxic effects on osteoblasts and fibroblasts, and that they all supported cell attachment and growth, even to a greater extent than tissue culture plastic. The membrane with the PANI/CS ratio 1:3 supports better cell attachment and proliferation for both cell lines due to a synergistic effect of hydrophilicity retention due to the high chitosan content and the conductivity that PANI introduced to the membrane.

Glucose diffusivity in cell-seeded tissue engineering scaffolds

OBJECTIVE

To determine the effective glucose diffusion coefficient in cell-seeded porous scaffolds to understand the importance of nutrient diffusion in tissue engineering bioreactors.

RESULTS

Cell growth changed the morphological structure of the scaffolds decreasing the effective pore space and, inevitably, decreasing the effective glucose diffusivity in the chosen scaffolds, namely, collagen, poly(L-lactide) and poly(caprolactone) scaffolds from 3.7 × 10(-9) to 3.2 × 10(-9) m(2)/s, 1.4 × 10(-10) to 9.1 × 10(-11) m(2)/s and 1.8 × 10(-10) to 1.3 × 10(-10) m(2)/s, respectively.

CONCLUSIONS

The presence of cells over time during cell culture reduces the mobility of glucose. The results can predict the glucose concentration profiles in thick engineered tissues.