Removal of a cationic dye from aqueous solutions by adsorption onto bentonite clay

Investigation of the efficacy of Alhagi maurorum plant powder for Janus Green B dye removal from wastewater

The growth of industrial activities, has led to a significant increase in the influx of color pollutants into the environment. Phytoremediation can play a crucial role in enhancing wastewater quality. Accordingly, this study sought to evaluate the effectiveness of Alhagi maurorum plant powder in removing Janus Green B (JGB) dye from aqueous solutions. The adsorbent's properties were characterized through Fourier-transform infrared spectroscopy. The study examined various parameters, including initial dye concentration (20-110 mg/L), adsorbent dosage (0.002-0.02 g), solution pH (2-10), and contact time (5-50 min). The experiments revealed that the maximum dye removal efficiency, 99.51%, was achieved under optimal conditions: pH 7, a contact time of 20 min, an adsorbent dosage of 0.01 g, and an initial dye concentration of 90 mg/L. The adsorption of JGB onto the adsorbent followed the Langmuir isotherm model, with a maximum adsorption capacity of 90.909 mg/g. The kinetic results supported a pseudo-second-order model for the adsorption process, with an R2 value of 0.9999. The calculated Gibbs free energy changes (ΔG°) at temperatures of 288, 298, 308, 318, and 328 K were found to be -5354.28, -5993.61, -6439.66, -7026.51, and -7932.05 kJ/mol, respectively, indicating the spontaneity of the adsorption process.

Linear and nonlinear regression modelling of industrial dye adsorption using nanocellulose@chitosan nanocomposite beads

Nanocellulose@chitosan (nc@ch) composite beads were prepared via coagulation technique for the elimination of malachite green dye from aqueous solution. As malachite green dye is highly used in textile industries for dyeing purpose which after usage shows fatal effects to the ecosystems and human beings also. In this study the formulated nanocellulose@chitosan composite beads were characterized by Particle size analysis (PSA), Field emission scanning electron microscopy (FESEM), Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis were done to evaluate nanoparticles size distribution, morphological behaviour, functional group entities and degree of crystallinity of prepared beads. The nanocomposite beads adsorption performance was investigated for malachite green (MG) dye and BET analysis were also recorded to know about porous behaviour of the nanocomposite beads. Maximum removal of malachite green (MG) dye was found to be 72.0 mg/g for 100 ppm initial dye concentration. For accurate observations linear and non-linear modelling was done to know about the best-fitted adsorption model during the removal mechanism of dye molecules, on evaluating it has been observed that Langmuir isotherm and Freundlich isotherm show best-fitted observation in the case of linear and non-linear isotherm respectively (R2 = 0.96 & R2 = 0.957). In the case of kinetic linear models, the data was well fitted with pseudo-second-order showing chemosorption mechanism (R2 = 0.999), and in the case of non-linear kinetic model pseudo first order showed good fit showing physisorption mechanism during adsorption (R2 = 0.999). The thermodynamic study showed positive values for ΔH° and ΔS° throughout the adsorption process respectively, implying an endothermic behaviour. In view of cost effectiveness, desorption or regeneration study was done and it was showed that after the 5th cycle, the removal tendency had decreased from 48 to 38 % for 20-100 ppm dye solution accordingly. Thus, nanocomposite beads prepared by the coagulation method seem to be a suitable candidate for dye removal from synthetic wastewater and may have potential to be used in small scale textile industries for real wastewater treatment.

Design and synthesis of LDH nano composite functionalized with trimesic acid and its environmental application in adsorbing organic dyes indigo carmine and methylene blue

This work designed and prepared an organic-inorganic nanocomposite using layered double hydroxide (LDH) inorganic substrate and trimesic acid (TMA) as chelating agent. Subsequently, the synthesized organic-inorganic nanocomposite was assessed using multiple identification methods, including FTIR, EDX, XRD, TGA, and FESEM, and the outcomes demonstrated that the intended structure was successfully prepared. Also, in order to investigate the efficiency of the Mg-Al LDH-TMA nanocomposite as an efficient nano adsorbent, it was used for removal of indigo carmine (IC) and methylene blue (MB) from aqueous solutions. This synthetic nanocomposite showed a high adsorption capacity. The efficiency of the produced nanocomposite in the adsorption of selected dyes was investigated with the help of batch adsorption studies performed in a variety of experimental settings, including dye concentration, adsorbent dose, pH, adsorption temperature and contact time. Furthermore, the produced Mg-Al LDH-TMA nanocomposite exhibits strong stability and can be recycled and reused five times in a row, which is well consistent with the principles of green chemistry.

Preparation magnetic graphene oxide/diethylenetriamine composite for removal of methylene blue from aqueous solutions

Graphene oxide (GO) and its derivatives have several applications in many areas such as environmental and energy materials, water treatment and biomedical technologies. Because of having various polar groups on its surface, GO is considered as an excellent adsorbent. However, for many applications such as adsorption of pollution from aqueous solutions, chemical functionalization of graphene oxide is often a necessary requirement. In the present study, a new composite from graphene oxide, diethylenetriamine (DETA) and silica coated MnFe2O4 nanoparticles (GO/DETA/MnFe2O4@SiO2) was prepared. The structure, thermal stability and magnetic properties of the composite were studied by FT-IR, XRD, SEM, EDS, VSM and TGA spectroscopic methods. The prepared composite showed magnetic property with a saturation magnetization of 3.0 emu/g. The adsorption properties of GO/DETA/MnFe2O4@SiO2 composite for methylene blue (MB) in aqueous solution were studied using batch method. The effects of important parameters on the surface adsorption process of MB, including pH, contact time, adsorbent dosage and initial dye concentration were investigated. The adsorption isotherm was in accordance with Langmuir model showing surface homogeneity of the adsorbent. According to the Langmuir analysis, the maximum adsorption capacity (qm) of GO/DETA/MnFe2O4@SiO2 composite for MB was found to be 243.91 mg/g. The kinetic studies showed that the adsorption was pseudo first-order process. In addition, the thermodynamic studies indicated the adsorption was spontaneous and endothermic process.

Effective removal of malachite green oxalate from aqueous solution using Newbouldia laevis husk/MWCNTs nanocomposite: equilibrium, kinetics, and thermodynamics

The discharge of colored effluent into water bodies is a big concern; hence, the current work was designed to fabricate a superior nanocomposite (NBM) using the Newbouldia laevis husk (NB) and functionalized multiwalled carbon nanotubes (f-MWCNTs) for the adsorption of malachite green oxalate (MGO). Brunauer-Emmett-Teller (BET) surface analysis was used to assess the specific surface area of NB (0.7699 m2 g-1) and NBM (94.006 m2 g-1). Fourier transform infrared spectroscopy (FTIR) was employed to determine the chemical moieties on the surface of the adsorbent. Field emission scanning electron microscopy (FESEM) and thermogravimetric analysis (TGA) were used to analyze the surface morphology and the thermal behavior of the adsorbents. Essential factors of the adsorption process were investigated, and it was revealed that pH 6.0, adsorbent dose of 0.05 g, contact time 80 min, concentration of 100 mg dm-3 and maximum adsorption capacity of 35.78 mg g-1 (NB) and 69.97 mg g-1 (NBM) were the optimal parameters. The NB and NBM adsorption processes followed a pseudo-first-order kinetic model. The exothermic and endothermic adsorptive processes were noticed to be the best descriptions of MGO elimination by NB and NBM, respectively. The uptake of MGO by NB and NBM was best described by models of Freundlich and Langmuir isotherms. Besides, NBM demonstrated uptake efficiency that is >80% after the fourth adsorption/desorption cycle. As a result, NBM has a wide range of possible uses in environmental remediation.

New Transition Metal Coordination Polymers Derived from 2-(3,5-Dicarboxyphenyl)-6-carboxybenzimidazole as Photocatalysts for Dye and Antibiotic Decomposition

Coordination polymers (CPs) are an assorted class of coordination complexes that are gaining attention for the safe and sustainable removal of organic dyes from wastewater discharge by either adsorption or photocatalytic degradation. Herein, three different coordination polymers with compositions [Ni(HL)(H2O)2·1.9H2O] (1), [Mn3(HL)(L)(μ3-OH)(H2O)(phen)2·2H2O] (2), and [Cd(HL)4(H2O)]·H2O (3) (H3L = 2-(3,5-dicarboxyphenyl)-6-carboxybenzimidazole; phen = 1,10-phenanthroline) have been synthesized and characterized spectroscopically and by single crystal X-ray diffraction. Single crystal X-ray diffraction results indicated that 1 forms a 2D layer-like framework, while 2 exhibits a 3-connected net with the Schläfli symbol of (44.6), and 3 displays a 3D supramolecular network in which two adjacent 2D layers are held by π···π interactions. All three compounds have been used as photocatalysts to catalyze the photodegradation of antibiotic dinitrozole (DTZ) and rhodamine B (RhB). The photocatalytic results suggested that the Mn-based CP 2 exhibited better photodecomposition of DTZ (91.1%) and RhB (95.0%) than the other two CPs in the time span of 45 min. The observed photocatalytic mechanisms have been addressed using Hirshfeld surface analyses.

A 'green' adsorbent: effect of chemical modification of biosorbents on the adsorption of methylene blue and malachite green

The dyes methylene blue and malachite green were adsorbed onto the as-prepared and chemically-modified biosorbents obtained from the mesocarp of crushed calabash (Lagenaria siceraria). The aim was to investigate the adsorption capacity of the natural biosorbent, neutralized biosorbent (0.1 mol L-1 NaOH, followed by 0.1 mol L-1 HCl), acid biosorbent (0.1 mol L-1 HCl) and basic biosorbent (0.1 mol L-1 NaOH). The maximum adsorption capacities for methylene blue were, in ascending order: 11.37 mg g-1 for acid biomass < 11.87 mg g-1 for basic biomass < 16.55 mg g-1 for neutralized biomass < 18.83 mg g-1 for natural biomass. In ascending order, for malachite green the maximum adsorption capacities were: 12.80 mg g-1 for basic biomass < 13.31 mg g-1 for acid biomass < 18.74 mg g-1 for natural biomass < 19.67 mg g-1 for neutralized biomass. A comparison of the thermodynamic parameters Gibbs free energy, enthalpy and entropy obtained for the natural biosorbent with those obtained for the chemically-modified biosorbents indicated that the chemical modification proposed led to a change in the materials. The removal capacity, the Freundlich isotherms and the pH of the biosorbents underwent changes with the chemical modification carried out, promoting a novel approach for the use of this biosorbent.

A carbon dot-based clay nanocomposite for efficient heavy metal removal

Carbon dots and their derivatives with fascinating photoluminescence properties have recently attracted tremendous scientific attention. This work describes the preparation of novel fluorescent bentonite clay (B), modified with carbon dot nanomaterials (CDs), and its usage as a lead removal platform. The CDs were prepared using a hydrothermal method from graphitic waste which served as the carbon source material. The as-obtained CDs were found to be fluorescent, being spherical in shape, positively charged, and smaller than 5 nm. Encouraged by their structure and photoluminescence features, they were used as surface modifiers to make fluorescent bentonite nanocomposites. Bentonite was used as a negatively charged model of aluminosilicate and reacted with the positively charged CDs. XRD, FTIR, XPS, and fluorescence analysis were used to characterize the prepared materials. The results indicate that the CDs intercalated inside the bentonite matrix were stable with excellent optical properties over time. They were finally used as an efficient hybrid platform for lead removal with a removal efficiency of 95% under light conditions, at room temperature, in an alkaline medium, and after only 10 min of reaction, compared to 70% under dark conditions. The pseudo-second-order kinetics and Langmuir isotherm models were better fitted to describe the adsorption process. The maximum adsorption capacity was equal to 400 mg g-1 toward Pb(ii) removal, at room temperature and pH = 8, under light conditions. To summarize, we have designed UV light stimuli responsive carbon dot-intercalated clay with high Pb(ii) adsorption capacity and long-term stability.

Deep remediation of As(III) in water by La-Ce bimetal oxide modified carbon framework

Arsenic contamination of groundwater harms the health of millions of people, especially As(III), which is extremely toxic and difficult to remediate. Herein, we fabricated a reliable La-Ce binary oxide-anchored carbon framework foam (La-Ce/CFF) adsorbent for As(III) deep removal. Its open 3D macroporous structure ensures fast adsorption kinetic. The incorporation of an appropriate amount of La could enhance the affinity of La-Ce/CFF for As(III). The adsorption capacity of La-Ce₁₀/CFF reached 40.01 mg/g. It could purify the As(III) concentrations to drinking standard level (< 10 μg/L) over the pH ranges 3-10. It also possessed excellent anti-interference ability to the interfering ions. In addition, it worked reliably in the simulated As(III)-contaminated groundwater and river water. La-Ce₁₀/CFF could easily apply in fixed-bed, and La-Ce₁₀/CFF (1 g) packed column could purify 4580 BV (36.0 L) of As(III)-contaminated groundwater. When further considering the excellent reusability of La-Ce₁₀/CFF, it is a promising and reliable adsorbent for As(III) deep remediation.

Investigation of interfacial adsorption between microplastics and methylparaben in aqueous solution

Microplastics and parabens are considered to be a global contaminants, especially in the aquatic ecosystem. The interfacial interaction between four types of microplastics including polystyrene, polyethylene, polyethylene terephthalate, and polyvinyl chloride, and methylparaben were investigated in this study. The results showed that molecular layer dominates the adsorption, with the rate significantly affected by both internal diffusion and external diffusion. Among the four types, polystyrene and polyvinyl chloride showed the smallest and biggest adsorption capability, with the values were 0.656 and 1.269 mg g^-1, respectively. For the adsorption capability, smaller particle size and higher pH value possessed positive effects. However, the existence of metal ions could inhibit the adsorption process, except for a weak promotion at low salinity. Physical adsorption effects, such as electrostatic interaction, hydrogen bond formation, and covalent bond formation, had been identified that dominated the adsorption. This finding could be served as a speculative foundation for the further study of the toxicity, migration, and ecological risk assessment of microplastics in aquatic ecosystem.

Preparation and characterization of low-cost adsorbents for the efficient removal of malachite green using response surface modeling and reusability studies

Malachite green used in textile and dyeing industries is a common persistent pollutant in wastewater and the environment causing major hazards to human health and aquatic organisms. In this study, the response surface methodology was applied to optimize the adsorptive removal of malachite green using nano-bentonite, MgO-impregnated clay, and Mucor sp. composites. The nano materials and Mucor sp. composite were characterized by FTIR, SEM and X-ray diffractometry. According to the obtained results, nano-bentonite exhibits a maximum MG adsorption efficiency of 98.6% at 35 °C, pH 7.0, 60 min contact time, 1.0 g/L adsorbent dosage, and 50 mg/L initial MG concentration. On the other hand, the maximum efficiency for MG adsorption on MgO-impregnated clay of 97.04% is observed at pH 9.0, 60 min contact time, 0.7 g/L adsorbent dosage, and 50 mg/L initial MG concentration. The Malachite green (MG) adsorption isotherm on MgO-impregnated clay corresponded with the Freundlich isotherm, with a correlation coefficient (R²) of 0.982. However, the Langmuir adsorption isotherm was a superior fit for nano-bentonite (R² = 0.992). The adsorption activities of nano-bentonite and MgO-impregnated clay were fitted into a pseudo-second-order kinetic model with R² of 0.996 and 0.995, respectively. Additionally, despite being recycled numerous times, the adsorbent maintained its high structural stability and removal effectiveness for nano-bentonite (94.5-86%) and MgO-impregnated clay (92-83%).

Competitive adsorption mechanisms of pigments in sugarcane juice on starch-based magnetic nanocomposites

The pigments in sugarcane result the crystallised sucrose appears unsatisfactorily yellow. In this study, cationic tapioca starch (CTS)-functionalized magnetic nanoparticles (CTS@Fe₃O₄) were synthesized and used as adsorbents for the removal of undesirable pigments. The adsorption properties of CTS@Fe₃O₄ were investigated by a sugarcane juice colorant model consisting of caffeic acid (CA), gallic acid (GA) and melanoidin (ME). The equilibrium adsorption capacities of CTS@Fe₃O₄ for CA, GA, and ME were 185, 160 and 580 mg g^-1 at the optimal conditions (60, 60 and 180 mg L^-1 initial concentrations, respectively; 0.3 mg mL^-1 CTS@Fe₃O₄ dosage, 313 K temperature, and pH value of 7). The adsorption process was described well by second-order kinetic and Langmuir isotherm models with a high fitting correlation coefficient approaching 1, suggesting that the pigments formed a surface monolayer with a homogenously distributed adsorption energy and was mainly dominated by chemisorption. The thermodynamic parameters (Gibbs free energy <0, enthalpy >0, and entropy >0) revealed that the adsorption process was endothermic and spontaneous. For the binary system, the competitive adsorption between pigments was primarily antagonistic. The speed of adsorption was the main factor affecting competitive adsorption, and the additional adsorption force reduced the effects of coexisting adsorbates.

Highly porous organoclay-supported bimetal-organic framework (CoNi-MOF/OC) composite with efficient and selective adsorption of organic dyes

Herein, a highly porous bimetal-organic framework (bi-MOF) based on cobalt and nickel was successfully in situ grown on organoclay (OC) clusters by solvothermal method. Accordingly, the hierarchical porous CoNi-MOF/OC composite with a superior specific surface area of 2046 m²/g and a large pore volume of 0.763 cm³/g was obtained, which facilitated the adsorption of organic dyes. A morphological study using scanning electron microscopy indicated the formation of uniform bi-MOF crystals on the OC plates. Furthermore, the single- and multi-dye adsorption assays were implemented to precisely evaluate the adsorption capacity and selectivity of CoNi-MOF/OC composite to anionic and cationic dyes. The results revealed a high adsorption capacity of 58.61 mg/g at an adsorbent content of 15 mg, initial dye concentration of 20 ppm, and contact time of 25 min for MB, which is superior to several existing clay-based adsorbents. The adsorption kinetics study showed that the adsorption of cationic and anionic dyes onto the CoNi-MOF/OC composite followed the pseudo-second-order kinetic model. Interestingly, the regeneration study showed appropriate reusability and stability of the CoNi-MOF/OC composite for the removal of organic dyes with an almost unchanged structure after four regeneration cycles. The results of this study provide new insights for the rational design and fabrication of next-generation clay-based adsorbent by combining the synergistic advantages of bi-MOF with superior specific surface area and pore volume with organoclay composition and structure.

Amino-Functionalized Cellulose Nanofiber/Lignosulfonate New Aerogel Adsorbent for the Removal of Dyes and Heavy Metals from Wastewater

Due to the increasingly widespread water pollutants and the high cost of treatment methods, there is a demand for new, inexpensive, renewable, and biodegradable adsorbent materials for the purification of wastewater contaminants. In this study, a new biocomposite aerogel (Amf-CNF/LS) was prepared using a chemically cross-linking method between the amino-functionalized cellulose nanofibers (Amf-CNF) and lignosulfonates (LS). The physical and chemical properties of the prepared aerogel were investigated using several techniques including elemental analysis, scanning electron microscopy (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), and N₂ adsorption-desorption analysis. The Amf-CNF/LS aerogel was then applied for the removal of methylene blue (MB), rhodamine B dye (RhB), and the heavy metal cadmium ion (Cd²⁺) from synthetic wastewater solutions. The adsorption parameters controlling the adsorption process including the pH, contact time, adsorbent dosage, and adsorbate concen-tration were optimized. High adsorption kinetics and isotherms were observed, with the adsorption isotherms of the Amf-CNF/LS aerogel fitting the Langmuir model with maximum adsorption capacities of 170.94, 147.28, and 129.87 mg/g for MB, RhB, and Cd²⁺, respectively. These results show that Amf-CNF/LS aerogel is a promising green and inexpensive adsorbent for MB, RhB, and Cd²⁺ removal from wastewater.

Adsorption of dyestuff by nano copper oxide coated alkali metakaoline geopolymer in monolith and powder forms: Kinetics, isotherms and microstructural analysis

To remove contaminants and pollutants from wastewater systems, adsorbents are widely used. Geopolymers offer a convenient alternative as adsorbents in the wastewater treatment system as they are low-cost, environmentally friendly, and safer. A new adsorbent material prepared by coating nano copper oxide on the surface of alkali-activated metakaolin showed a higher ability to remove methylene blue (MB) dye from wastewater, thus making them attractive in dye removal applications. First, nano copper oxide was prepared by sol gel method and metakaolin geopolymer was produced using sodium silicate solution having a Ms value of 1.1 (M). Afterwards, nano copper oxide (MC) was coated on the surface of the geopolymer. The ability of MB dye to bind to both pristine (M^p, MC^p) and powder forms (M^pr, MC^pr) of the geopolymer was evaluated. X-ray diffraction revealed that the halo found at 27.40°-31.077° (2θvalue) in both samples related to amorphous gel's composition and the major peaks of copper oxide in MC^pr were sited at a 2θ value of 35.45° and 38.88°.The dye removal efficiency can be inferred from the increased adsorption capacity of 11.9 mg/g (M^p) and 14.4 mg/g (MC^p) for the monolith form and 81.43 mg/g (M^pr) and 87.82 mg/g (MC^pr) for the powder form. The adsorption of reused active sites was 73% for M^pr and 83% for MC^pr up to the fifth cycle after regeneration by heat treatment at 400 °C. The models that best suited the adsorption data were pseudo-second-order and Freundlich isotherms, which indicated possible chemisorption with intra-particle diffusion. Furthermore, the binding energy is shifted to lower value in XPS spectra due to dye adsorption arising from electrostatic attraction. A higher electron density is formed due to interaction with an equal contribution of silanol Si-O-H and Si-O-Na/Cu(O1s). The adsorbents are effective over a wide pH range and their improved recycling capability increases their applications for a wide range of uses.

Composite Materials Based on a Zr4+ MOF and Aluminosilicates for the Simultaneous Removal of Cationic and Anionic Dyes from Aqueous Media

Environmental pollution has been a reality for many decades, with its contamination intensifying daily due to rapid urbanization and the ever-increasing world population. Dyes, and especially synthetic ones, constitute a category of pollutants that not only affect the quality of water but also exhibit high toxicity toward living organisms. This study was thoroughly planned to explore the removal of two toxic dyes, namely the methylene blue (MB) and methyl orange (MO) compounds from contaminated aqueous media. For this purpose, we designed and synthesized two new composite materials based on ammonium-functionalized Zr⁴⁺ MOF (MOR-1 or UiO-66-NH₃⁺) and naturally occurring sorbents, such as bentonite and clinoptilolite. The composite materials displayed exceptional sorption capability toward both MB⁺ and MO^- ions. A key finding of this study was the high efficiency of the composite materials to simultaneously remove MB⁺ and MO^- under continuous flow conditions, also showing regeneration capability and reusability, thus providing an alternative to well-known mixed bed resins.

Determination of the Ni(II) Ions Sorption Mechanism on Dowex PSR2 and Dowex PSR3 Ion Exchangers Based on Spectroscopic Studies

This paper estimates the suitability of the strongly basic anion exchangers, Dowex PSR2 and Dowex PSR3, as sorbents of nickel ions in aqueous solutions. These actions are aimed at searching for new solutions due to the growing discharge of nickel into wastewaters, primarily due to its addition to steel. The nickel sorption experiments were conducted under static conditions and resulted in the optimization of pH, phase contact time, initial solution concentration, and temperature. The next step was to calculate the kinetic, isothermal, and thermodynamic parameters. Moreover, the ion exchangers were characterized by means of Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and CHN elemental analysis. It was found that the sorption process was most effective at pH 6 after 240 min and at the temperature of 293 K. The values of the thermodynamic parameters revealed that the adsorption was exothermic and spontaneous. The physicochemical analyses combined with the experimental research enabled determination of the sorption mechanism of Ni(II) ions.

Insights on applications of bentonite clays for the removal of dyes and heavy metals from wastewater: a review

In recent decades, increased industrial, agricultural, and domestic activities have resulted in the release of various pollutants into the aquatic systems, which require a reliable and environmentally friendly method to remove them. Adsorption is one of the most cost-effective and sustainable wastewater treatment techniques. A plethora of low-cost bio-based adsorbents have been developed worldwide so far to supplant activated carbon and its high processing costs. Bentonite clays (BCs), whether in natural or modified form, have gained enormous potential in wastewater treatment and have been used successfully as a novel and cost-effective bio-sorbent for removing organic and inorganic pollutants from the liquid suspension. It has become a sustainable solution for wastewater treatment due to its variety of surface and structural properties, superior chemical stability, high capacity for cation exchange, elevated surface area due to its layered structure, non-toxicity, abundance, low cost, and high adsorption capacity compared to other clays. This review encompasses comprehensive literature about various modification techniques and adsorption mechanisms of BCs concerning dyes and heavy metal removal from wastewater. A critical overview of different parameters for optimizing adsorption capacity and regeneration via the desorption technique has also been presented here. Finally, a conclusion has been drawn with some future research recommendations based on technological challenges encountered in industrializing these materials.

Application of dye saturated clay adsorbent from dyeing wastewater as textile printing pigment

Background

Adsorption by cheap materials (like clay and activated carbon) is one of the most effective methods for treating dye wastewaters, especially for cationic dyes. Although activated carbon has a black residue, the unique nanostructure of clay adsorbs dye molecules between its layers and produces a colored sludge. Dye intercalated clays were also introduced as possible coloring pigments. This work tries to combine the wastewater treatment and hybrid pigment production processes so that the remaining sludge of the process can be used as a printing pigment.

Results

Bentonite clay was examined for treating real dye wastewater from the textile industry containing four cationic dyes. The adsorption mechanism of all dyes was studied individually, and the results show that bentonite has a minimum adsorption capacity of 467 mg/g for Basic Red 46 dye based on the Langmuir model. The adsorption process decreased the turbidity by about 86% and reduced the total dissolved solids (TDS) and chemical oxygen demand (COD) of wastewater. The produced hybrid showed a nano‐layer structure according to the field emission scanning electron microscopy (FESEM). Differential thermal analysis (DTA) shows that the thermal stability of the pigment improved by about 30 °C compared to the pristine dye. Fourier transform infrared (FTIR) and thermogravimetric analysis (TGA) showed that the dye: bentonite ratio should be adjusted at a medium level to control the hydrophilicity of the hybrid and improve its miscibility in binders.

Conclusion

The produced pigment was printed on cotton fabric with a desirable visual color appearance and showed acceptable rubbing and light fastnesses. The result indicates that wastewater sludge from this adsorption process could be applicable as an industrial pigment. © 2022 Society of Chemical Industry (SCI).

Natural and recycled materials for sustainable membrane modification: Recent trends and prospects

Despite water being critical for human survival, its uneven distribution, and exposure to countless sources of pollution make water shortages increasingly urgent. Membrane technology offers an efficient solution for alleviating the water shortage impact. The selectivity and permeability of membranes can be improved by incorporating additives of different nature and size scales. However, with the vast debate about the environmental and economic feasibility of the common nanoscale materials in water treatment applications, we can infer that there is a long way before the first industrial nanocomposite membrane is commercialized. This stumbling block has motivated the scientific community to search for alternative modification routes and/or materials with sustainable features. Herein, we present a pragmatic review merging the concept of sustainability, nanotechnology, and membrane technology through the application of natural additives (e.g., Clays, Arabic Gum, zeolite, lignin, Aquaporin), recycled additives (e.g., Biochar, fly ash), and recycled waste (e.g., Polyethylene Terephthalate, recycled polystyrene) for polymeric membrane synthesis and modification. Imparted features on polymeric membranes, induced by the presence of sustainable natural and waste-based materials, are scrutinized. In addition, the strategies harnessed to eliminate the hurdles associated with the application of these nano and micro size additives for composite membranes modification are elaborated. The expanding research efforts devoted recently to membrane sustainability and the prospects for these materials are discussed. The findings of the investigations reported in this work indicate that the application of natural and waste-based additives for composite membrane fabrication/modification is a nascent research area that deserves the attention of both research and industry.

In-situ hydrothermal synthesis of CNT decorated by nano ZnS/CuO for simultaneous removal of acid food dyes from binary water samples

The zinc sulfide/copper oxide-carbon nanotube nanocomposite (ZnS/CuO-CNT) was fabricated by using an in-situ hydrothermal synthesis method and was used for simultaneous ultrasound-assisted adsorptive removal of a binary mixture of ponceau 4R (P4R) and tartrazine (TA) acid food dyes from contaminated water. The as-synthesized ZnS/CuO-CNT was described by FESEM, XRD, FTIR, BET, and zeta potential analysis. The results included nested network morphology, high purity with the crystalline structure, oxygen-containing functional groups, mesoporous/micropores texture with cumulate interspace, specific surface area of 106.54 m2 g-1, and zero-point charge (pHzpc) of 5.3. In adsorption experiments, the simultaneous effect of main independent variables, including solution pH, adsorbent dosage, concentration of each dye, temperature, and sonication time on the removal efficiency of dyes was studied systematically using the central composite design (CCD) method based on response surface methodology (RSM). Also, the second-order multivariate equation was presented to determine the relationship between the removal efficiencies of P4R and AT dyes and six independent effective variables. The high correlation coefficient (R2 ≥ 0.99), significant p-value (P < 0.0001), and non-significant lack-of-fit (P > 0.05) showed the high accuracy, and validity of the proposed model to predict the removal efficiency of P4R and TA acid food dyes. The experimental removal efficiency for P4R and TA dyes was found to be 98.45 ± 2.54, and 99.21 ± 2.23, respectively. Also, the Langmuir maximum adsorption capacity for P4R and TA dyes was determined to be 190.1 mg g-1 and 183.5 mg g-1, respectively. Finally, the adsorbent's reusability was tested for six periods and could be reused repeatedly without significant reduction in adsorption performance.

Synthesis and application of AuNi@AC nano adsorbents for the removal of Maxilon Blue 5G azo dye from aquatic mediums

In this research, gold-nicel supported on activated carbon (AC) nanoadsorbent (AuNi@AC) synthesized by following a series of physicochemical procedures was prepared for the removal of Maxilon Blue 5G (MB) which is a cationic textile dye. Experimental studies based on parameters specifically pH, contact time, nano catalytic adsorbent particle, initial MB dye concentration and temperature effect were conducted in aqueous solutions in a batch system. AuNi@AC nanoadsorbents (NAs) reached the equilibrium in 30 min under optimum conditions in adsorption of the dye. The pseudo-first, second-order, and intra-particle diffusion models were tested to evaluate a the experimental results. Adsorption kinetics were found to be represented by the pseudo-second-order model, and the maximum adsorption capacity (q_max.) was calculated to be 542.90 mg/g (or 2.041 mmol/g). The synthesized magnetic AuNi@AC nanoadsorbent showed a high-efficiency reusability effect of about 64% after five reuse runs. Also, thermodynamic function parameters such as activation energy (Ea), Gibbs free energy (ΔG *), and entropy (ΔS *) were investigated in the sorption study. After all evaluation of data, it was concluded that the novel AuNi@AC nanoadsorbent could be considered as an effective support material for the removal of various organic pollutants in aquation solution especially for the removal of MB.

Synergistic Treatment of Congo Red Dye with Heat Treated Low Rank Coal and Micro-Nano Bubbles

In this study, the adsorption method and micro-nano bubble (MNB) technology were combined to improve the efficiency of organic pollutant removal from dye wastewater. The adsorption properties of Congo red (CR) on raw coal and semi-coke (SC) with and without MNBs were studied. The mesoporosity of the coal strongly increased after the heat treatment, which was conducive to the adsorption of macromolecular organics, such as CR, and the specific surface area increased greatly from 2.787 m²/g to 80.512 m²/g. MNBs could improve the adsorption of both raw coal and SC under different pH levels, temperatures and dosages. With the use of MNBs, the adsorption capacity of SC reached 169.49 mg/g, which was much larger than that of the raw coal at 15.75 mg/g. The MNBs effectively reduced the adsorption time from 240 to 20 min. In addition, the MNBs could ensure the adsorbent maintained a good adsorption effect across a wide pH range. The removal rate was above 90% in an acidic environment and above 70% in an alkaline environment. MBs can effectively improve the rate of adsorption of pollutants by adsorbents. SC was obtained from low-rank coal through a rapid one-step heating treatment and was used as a kind of cheap adsorbent. The method is thus simple and easy to implement in the industrial context and has the potential for industrial promotion.

Synergy of Adsorption and Plasmonic Photocatalysis in the Au-CeO2 Nanosystem: Experimental Validation and Plasmonic Modeling

Adsorption-mediated water treatment leaves adsorbents as secondary pollutants in the environment. However, photocatalysis aids in decomposing the contaminant into its nontoxic forms. In this context, we demonstrate an adsorption-photocatalysis pairing in Au-CeO₂ nanocomposites for a total methylene blue (MB) removal from water. We synthesized Au-CeO₂ through the citrate (cit) reduction method at different Au loading and studied its adsorption capacity with kinetics and thermodynamic models. We observe that the high adsorption capacity of Au-CeO₂ is primarily because of the presence of Ce³⁺ states in CeO₂ and citrate ligands on Au NPs. The Ce³⁺ states interact and transfer their electrons to supported Au NPs, rendering a negative charge over Au. The negatively charged Au surface and the carboxyl (-COO^-) group of citrate ligands mediate an electrostatic interaction/adsorption of cationic MB. The total removal of MB is expedited under white light and lasers. A control experiment with Au NPs shows less adsorption-photocatalysis. The size of Au NPs and Au-CeO₂ interfacial interaction is responsible for the surface plasmon resonance spectral position at 550-600 nm. Linear sweep voltammetry (LSV) and plasmonic field simulation show surface plasmon-driven photocatalysis in Au-CeO₂. LSV shows a 3-fold higher photocurrent density in Au-CeO₂ than colloidal Au NPs under white light. The simulated electric field intensity in Au-CeO₂ is maximum at SPR excitation and the closest interfacial separation (d = 0 nm). The plasmon-driven photocatalysis in colloidal Au NPs is mainly due to the interaction of hot electrons with the adsorbed MB molecule. Notably, near-field light concentration, hot electrons, and interfacial charge separation are responsible for excellent MB removal in the Au-CeO₂ nanosystem. The total MB removal through adsorption-photocatalysis pairing is 99.3% (Au-CeO₂), 30.7% (Au NPs), and 13% (CeO₂).

Bentonite-based sodium alginate/ dextrin cross-linked poly (acrylic acid) hydrogel nanohybrids for facile removal of paraquat herbicide from aqueous solutions

Removal of hazardous herbicides from the aqueous solution is critical for overcoming health-related issues across the wider population. In the current work, we have prepared sodium alginate (SAlg), dextrin, and acrylic acid (AA) based cross-linked hydrogels, composed of bentonite incorporated in the biocompatible hydrogel matrix. This hydrogel composite can remove highly toxic herbicide paraquat (PQ). As-synthesised hydrogel (SAlg/dextrin-cl-PAA) and hydrogel composite (SAlg/dextrin-cl-PAA/bentonite) were further analysed by infra-red spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and thermogravimetric analysis (TGA/DSC). For the first time, PQ adsorption onto sodium and dextrin-based hydrogel was also evaluated. The measured highest removal capacities were 76.923 and 90.909 mg g^-1 for the SAlg/dextrin-cl-PAA and SAlg/dextrin-cl-PAA/bentonite, respectively. Pseudo-second-order (PSO) and Langmuir isotherm models have shown to be best suited for accurately describing the adsorption mechanism. A thermodynamics study verified that the adsorption of PQ on adsorbents is spontaneous, favourable and exothermic. Moreover, reusability analysis shows that the adsorbents possess good reproducibility even after six successive cycles. The adsorption results demonstrate that the synthesised adsorbents are very efficient for removing herbicides (PQ) from wastewater.

Carbon fibres as potential bone implants with controlled doxorubicin release

This work presents the structural characterisation of carbon fibres obtained from the carbonization of flax tow at 400°C (CFs400°C) and 1000°C (CFs1000°C) and the thermodynamic and kinetic studies of adsorption of Doxorubicin (Dox) on the fibres. The characteristic of carbon fibres and their drug adsorption and removal mechanism were investigated and compared with that of natural flax tow. All fibres were fully characterized by scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), specific surface area analysis and Boehm titration. The results demonstrated the highest adsorption properties of CFs400°C at 323 K (q_max = 275 mg g⁻¹). The kinetic data followed the pseudo-second-order kinetic model more closely, whereas the Dubinin–Radushkevich model suitably described isotherms for all fibres. Calculated parameters revealed that the adsorption process of Dox ions is spontaneous and mainly followed by physisorption and a pore-filling mechanism. The removal efficiency for carbon fibres is low due to the effect of pore-blocking and hydrophobic hydration. However, presented fibres can be treated with a base for further chemical surface modification, increasing the adsorption capacity and controlling the release tendency.

A new cotton functionalized with iron(III) trimer-like metal framework as an effective strategy for the adsorption of triarylmethane dye: An insight into the dye adsorption processes

A new Cotton@Fe-BTC composite formed by Fe-BTC (BTC-H3: trimesic acid) metal framework (Fe-BTC MOF loading as high 38 wt %) supported by cellulose fiber is synthesized in aqueous media using a simple and green preparation method, described for the first time in this manuscript. This new strategy relies on the synergetic effect of the pure cellulose and MOFs frameworks resulting in hybrid nanofibers of MOFs@cellulose composite. A complete characterization of the composite material reveals its structural similarity to MIL-100(Fe), a Fe-BTC material. The Cotton@Fe-BTC composite potential use as an eco-friendly and low-cost adsorbent was evaluated for its adsorptive performance for the removal of dye belonging to the triarylmethane dye family (Malachite Green (MQ), Brilliant Green (BG), Pararosaniline (PR), Basic Fuchsine (BF), Crystal Violet (CV), Methyl Green (Met-G), Victoria Blue B (VB), Acid Fuchsin (AF) and Aniline Blue (AB)) in aqueous solution. The fast kinetics and high dye removal efficiencies (>90%) obtained in aqueous solutions. The structure of Cotton@Fe-BTC network, contributed to the remarkable adsorption properties towards a variety of triphenylmethanedye. The interparticle studies showed two main steps in the dye adsorption processes, with the exception of AF and BG. The equilibrium adsorption capacities qe (mg/g) follow the order: AF (3.64) Collapse

Key Words

• Adsorption
• Fe-BTC
• Natural cotton
• Solvation/desolvation penalty processes
• Triphenylmetane dye
• Water

Collapse

MESH Headings Collapse

Grants Collapse

Affiliation(s)

J.E. Conde-González Departamento de Química, Unidad Departamental de Química Analítica, Facultad de Ciencias, Universidad de La Laguna, Tenerife, Spain
P. Lorenzo-Luis Inorganic Chemistry Area, Section of Chemistry Faculty of Science, Tenerife, Spain Instituto Universitario de Bio-Orgánica “Antonio González”, University of La Laguna, Tenerife, Spain
V. Salvadó Department de Química, Facultat de Ciències, Universitat de Girona, C/ M Aurèlia Capmany, 69, 17003 Girona, Spain
J. Havel Department of Chemistry, Faculty of Science, Masaryk University, Kamenice 5/A14, 625 00 Brno, Czech Republic
E.M. Peña-Méndez Departamento de Química, Unidad Departamental de Química Analítica, Facultad de Ciencias, Universidad de La Laguna, Tenerife, Spain

Collapse

Integrated experimental and theoretical insights for Malachite Green Dye adsorption from wastewater using low cost adsorbent

Water pollution is one of the problems that threaten humanity, and to confront it with only experimental procedures is not enough. It is necessary to integrate both practical methods and theoretical calculations to achieve decontamination with the most accurate interpretation. Hence, discussing the experimental mechanism study of Malachite Green (MG) dye adsorption with the help of the application of density functional theory (DFT) calculations is the main goal of this article. The experimental results affirmed that the preparation of γ-Al₂O₃ by precipitation method using (NH₄)₂CO₃ improved the porosity, the surface capability, and the adsorbent capacities (q_max = 210 mg/g) at optimum condition compared with the previous studies. Kinetic and equilibrium studies showed that the adsorption follows the pseudo-second-order model and Freundlich isotherm model, respectively. Also, the calculated and observed thermodynamic parameters exerted positive values of ΔH° and ΔS°, which translates into an endothermic process with increasing disorder of the system. Theoretical calculations at DFT- B3LYP/6-31G (d,P) level of theory were calculated to show the selectivity of using the cationic form of MG in the experimental measurements to find the interaction mechanism. The electronic structure and intramolecular charge transfer of MG, its cationic form and the complex of MG-Al were investigated theoretically at the B3LYP/6-31 G (d,p) level of theory. The equilibrium geometries of MG, its cationic form and the complex of MG-Al were determined, and it was found that these geometries are non-planar. The E_HOMO and E_LUMO energies can be used to calculate the global properties; chemical hardness (η), softness (S) and electronegativity (χ). The calculated non-linear optical parameters (NLO) of the studied compounds, the electronic dipole moment (μ), first-order hyperpolarizability (β), the hyper-Rayleigh scattering (β_HRS) and the depolarization ratio (DR), showed promising optical properties. Finally, the computational and the experimental results indicated that the adsorption efficiency of MG from wastewater was directly associated with the dye electrophilicity power.

Development of a Novel Adsorbent Prepared from Dredging Sediment for Effective Removal of Dye in Aqueous Solutions

This study proposed a novel and low-cost adsorbent prepared from dredging sediment (DSD) for effective removal of dye in aqueous solutions. The adsorption efficiency and behavior of the DSD adsorbent toward the crystal violet (CV), a cationic dye, were investigated via batch experiments. The results showed that DSD samples contain mainly clay minerals (illite and kaolinite) and other mineral phases. In addition, DSD is a mesoporous material (Vmesopore = 94.4%), and it exhibits a relatively high surface area (~39.1 m2/g). Adsorption experiments showed that the solution’s pH slightly affects the adsorption process, and a pH of 11 gave a maximum capacity of 27.2 mg/g. The kinetic data of CV dye adsorption is well described by the pseudo–second-order and the Avrami models. The Langmuir and Liu isotherm models provide the best fit for the adsorption equilibrium data. The monolayer adsorption capacity of Langmuir reached 183.6, 198.0, and 243.6 mg/g at 293, 308, and 323 K, respectively. It was also found that the adsorption process was spontaneous (−ΔG°), exothermic (−∆H°), and increased the randomness (+∆S°) during the adsorption operation. The primary mechanisms in CV dye adsorption were ion exchange and pore filling, whereas electrostatic attraction was a minor contribution. In addition, three steps involving intraparticle diffusion occur at the same time to control the adsorption process. The results of this study highlight the excellent efficiency of DSD material as an ecofriendly sorbent for toxic dyes from water media.

Effects of the Surface Charge Density of Clay Minerals on Surface-Fixation Induced Emission of Acridinium Derivatives

Surface-fixation induced emission is a fluorescence enhancement phenomenon, which is expressed when dye molecules satisfy a specific adsorption condition on the anionic clay surface. The photophysical behaviors of two types of cationic acridinium derivatives [10-methylacridinium perchlorate (Acr+) and 10-methyl-9-phenylacridinium perchlorate (PhAcr+)] on the synthetic saponites with different anionic charge densities were investigated. Under the suitable conditions, the fluorescence quantum yield (Φf) of PhAcr+ was enhanced 22.3 times by the complex formation with saponite compared to that in water without saponite. As the inter-negative charge distance of saponite increased from 1.04 to 1.54 nm, the Φf of PhAcr+ increased 1.25 times. In addition, the increase in the negative charge distance caused the increase in the integral value of the extinction coefficient and the radiative deactivation rate constant (k f) and the decrease in the nonradiative deactivation rate constant. It should be noted that the 2.3 times increase in k f is the highest among the reported values for the effect of clay. From these results, it was concluded that the photophysical properties of dyes can be modulated by changing the charge density of clay minerals.

Removal of perfluorooctanoic acid (PFOA) from aqueous solution by amino-functionalized graphene oxide (AGO) aerogels: Influencing factors, kinetics, isotherms, and thermodynamic studies

Perfluorooctanoic acid (PFOA) is an emerging organic pollutant that has become ubiquitous in waterways and is difficult to be removed from wastewater using traditional treatment methods. In this study, amino-functionalized graphene oxide (AGO) aerogels were prepared as a potential remediation tool for water contaminated by PFOA. The structure of the prepared absorbent material was characterized by Fourier transform infrared spectroscopy, Raman spectroscopy, scanning electron microscope, and X-ray diffraction. The use of various adsorption times, temperatures, solution pH, and absorbent amount were investigated to determine optimum conditions for PFOA adsorption. Adsorption kinetics and thermodynamics of the absorbent were analyzed as well. AGO aerogels exhibited a high adsorption capacity of PFOA (1575 mg∙g^-1) and high removal efficiency (99.95%) in a solution containing 10 mg PFOA L^-1, likely due to the interconnected porous microstructures and amino groups of the AGO aerogels. The adsorption kinetics and isotherm of PFOA were well-fitted using pseudo-second-order and the Freundlich modelling. The adsorption mechanism of PFOA onto AGO aerogels followed spontaneous, exothermic, and physical processes. This study shows the potential of this material to remove PFOA from PFOA-contaminated waters effectively by providing insight into the understanding of the adsorption mechanisms of PFOA onto AGO aerogels.

Sustainable Adsorption Method for the Remediation of Crystal Violet Dye Using Nutraceutical Industrial Fenugreek Seed Spent

Nutraceutical industrial fenugreek seed spent (NIFGS), a relatively low-cost material abundantly available with little toxicity is used in crystal violet (CV) dye remediation from aqueous media and reported in the present study. To access the adsorption capacity, the factors affecting it are kinetics and the equilibrium thermodynamics. All the experiments were designed at approximately pH 7. The adsorption isotherm model proposed by Langmuir fits better than the Freundlich isotherm model. Kinetic studies data confirm the pseudo-second order model. It is evident from thermodynamic parameter values that the process of adsorption is endothermic, physical and dynamic. The process optimization of independent variables that influence adsorption was carried out using response surface methodology (RSM) through bi-level fractional factorial experimental design (FEED). The analysis of variance (ANOVA) was implemented to investigate the combined effect of parameters influencing adsorption. The possibilities of using dye-adsorbed NIFGS (“sludge”) for the fabrication of the composites using plastic waste are suggested.

The role of soils in the disposition, sequestration and decontamination of environmental contaminants

Soil serves as both a 'source' and 'sink' for contaminants. As a source, contaminants are derived from both 'geogenic' and 'anthropogenic' origins. Typically, while some of the inorganic contaminants including potentially toxic elements are derived from geogenic origin (e.g. arsenic and selenium) through weathering of parent materials, the majority of organic (e.g. pesticides and microplastics) as well as inorganic (e.g. lead, cadmium) contaminants are derived from anthropogenic origin. As a sink, soil plays a critical role in the transformation of these contaminants and their subsequent transfer to environmental compartments, including groundwater (e.g. pesticides), surface water (phosphate and nitrate), ocean (e.g. microplastics) and atmosphere (e.g. nitrous oxide emission). A complex transformation process of contaminants in soil involving adsorption, precipitation, redox reactions and biodegradation control the mobility, bioavailability and environmental toxicity of these contaminants. Soil also plays a major role in the decontamination of contaminants, and the 'cleaning' action of soil is controlled primarily by the physico-chemical interactions of contaminants with various soil components, and the biochemical transformations facilitated by soil microorganisms. In this article, we examine the geogenic and anthropogenic sources of contaminants reaching the soil, and discuss the role of soil in the sequestration and decontamination of contaminants in relation to various physico-chemical and microbial transformation reactions of contaminants with various soil components. Finally, we propose future actions that would help to maintain the role of soils in protecting the environment from contaminants and delivering sustainable development goals. This article is part of the theme issue 'The role of soils in delivering Nature's Contributions to People'.

Sorptive removal of methylene blue from water by magnetic multi-walled carbon nanotube composites

In the present study, five magnetic multi-walled carbon nanotubes (MMWCNTs) with different diameters were prepared and their performance on the sorptive removal of methylene blue (MB) from water was investigated. Transmission electron microscope, scanning electron microscope, Fourier transform infrared spectrometer, X-ray diffraction, and vibrating sample magnetometer confirm that the surface of these MMWCNTs has been decorated by Fe₃O₄ nanoparticles, which renders the MMWCNTs superparamagnetic. Thus, these MMWCNTs can be easily separated from water after the adsorption. During the adsorption process, pH slightly affected the removal efficiency of MB and the adsorption performed better under weak alkaline conditions. Adsorption kinetics followed the pseudo-second-order kinetic model well, and the Dubinin-Radushkevich model fitted the isotherms best. The maximum adsorption capacity for MB reached 204.2 mg/g, and the values decreased with increasing diameters of MMWCNTs due to decreasing specific surface areas. The thermodynamics parameters indicated the spontaneous and exothermic nature of the adsorption. The reusability test showed that MMWCNTs could be used for 6 cycles without significant loss of the adsorption capacity. And common ions (K⁺, Na⁺, Ca²⁺ and Al³⁺) and SDS in water did not show greatly effects on the removal efficiency of MB. Hence, MMWCNTs prepared in this study could be promising adsorbents for dyes removal from wastewater.

Zeolite NaP1 Functionalization for the Sorption of Metal Complexes with Biodegradable N-(1,2-dicarboxyethyl)-D,L-aspartic Acid

The possibility of application of chitosan-modified zeolite as sorbent for Cu(II), Zn(II), Mn(II), and Fe(III) ions and their mixtures in the presence of N-(1,2-dicarboxyethyl)-D,L-aspartic acid, IDHA) under different experimental conditions were investigated. Chitosan-modified zeolite belongs to the group of biodegradable complexing agents used in fertilizer production. NaP1CS as a carrier forms a barrier to the spontaneous release of the fertilizer into soil. The obtained materials were characterized by Fourier transform infrared spectroscopy (FTIR); surface area determination (ASAP); scanning electron microscopy (SEM-EDS); X-ray fluorescence (XRF); X-ray diffraction (XRD); and carbon, hydrogen, and nitrogen (CHN), as well as thermogravimetric (TGA) methods. The concentrations of Cu(II), Zn(II), Mn(II), and Fe(III) complexes with IDHA varied from 5-20 mg/dm³ for Cu(II), 10-40 mg/dm³ for Fe(III), 20-80 mg/dm³ for Mn(II), and 10-40 mg/dm³ for Zn(II), respectively; pH value (3-6), time (1-120 min), and temperature (293-333 K) on the sorption efficiency were tested. The Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin adsorption models were applied to describe experimental data. The pH 5 proved to be appropriate for adsorption. The pseudo-second order and Langmuir models were consistent with the experimental data. The thermodynamic parameters indicate that adsorption is spontaneous and endothermic. The highest desorption percentage was achieved using the HCl solution, therefore, proving that method can be used to design slow-release fertilizers.

Adsorption of Methyl Orange from Aqueous Solution Using PVOH Composite Films Cross-Linked by Glutaraldehyde and Reinforced with Modified α-MnO2

A poly(vinyl alcohol) (PVOH) composite cross-linked with glutaraldehyde (GL) containing α-MnO₂ modified with stearic acid (ST) was fabricated as an efficient sorbent for capturing methyl orange (MO) dye from the water system. We investigated the factors affecting MO adsorption in detail. The adsorption process showed a high dependence on the pH value. The highest removal efficiency (96.5%) was obtained at pH 2. The adsorption isotherm study indicated that the linear Freundlich isotherm was a more appropriate model for the adsorption process. The adsorption kinetics study revealed that the adsorption data matched with a nonlinear pseudo-first-order model. Physical adsorption interactions, including electrostatic interactions, hydrogen bonds, and dipole-dipole forces, play dominant roles in this process. Thermodynamic investigations confirmed that MO adsorption was spontaneous and exothermic with physical interactions. The outcomes demonstrated that the cross-linked PVOH-GL/α-MnO₂-ST composite could be a hopeful sorbent for the efficient uptake of MO molecules from polluted waters.