Remediation approaches for polycyclic aromatic hydrocarbons (PAHs) contaminated soils: Technological constraints, emerging trends and future directions

Impact of PAHs compounds on air quality in Maragheh city: Probabilistic risk assessment and source apportionment

This study explores the concentrations and spatial distribution of polycyclic aromatic hydrocarbons (PAHs) in the ambient air of Maragheh city, Iran, while evaluating their potential health implications. PAHs levels were examined in PAHs-bound to particulate matter samples collected from diverse locations across the city. The results showed that in all sampling points, there was contamination by PAHs. The mean total PAHs concentration was 11.5 ng.m-3, with Benzo[a]pyrene (BaP) emerging as the predominant compound. Comparative analysis with other cities revealed relatively lower BaP levels in Maragheh, yet surpassing WHO guidelines in 92 % of samples. Spatial assessment heightened pollution in areas characterized by heavy traffic and industrial operations. Based on PCA analysis, it appears that 74 % of PAHs compounds originate from vehicle emissions, 13 % from the combustion of petroleum, and 6 % from a possible petroleum source. Health risk appraisal uncovered escalated carcinogenic and mutagenic hazards, especially among children. While risks remained below USEPA thresholds, ongoing monitoring and targeted interventions are advised to mitigate PAHs pollution in Maragheh and similar urban locales. Future endeavors should prioritize source elucidation, health impact assessments, and public awareness initiatives to safeguard community well-being.

SIP-metagenomics reveals key drivers of rhizospheric Benzo[a]pyrene bioremediation via bioaugmentation with indigenous soil microbes

Rhizoremediation and bioaugmentation have proven effective in promoting benzo[a]pyrene (BaP) degradation in contaminated soils. However, the mechanism underlying bioaugmented rhizospheric BaP degradation with native microbes is poorly understood. In this study, an indigenous BaP degrader (Stenotrophomonas BaP-1) isolated from petroleum-contaminated soil was introduced into ryegrass rhizosphere to investigate the relationship between indigenous degraders and rhizospheric BaP degradation. Stable isotope probing and 16S rRNA gene amplicon sequencing subsequently revealed 15 BaP degraders, 8 of which were directly associated with BaP degradation including Bradyrhizobium and Streptomyces. Bioaugmentation with strain BaP-1 significantly enhanced rhizospheric BaP degradation and shaped the microbial community structure. A correlation of BaP degraders, BaP degradation efficiency, and functional genes identified active degraders and genes encoding polycyclic aromatic hydrocarbon-ring hydroxylating dioxygenase (PAH-RHD) genes as the primary drivers of rhizospheric BaP degradation. Furthermore, strain BaP-1 was shown to not only engage in BaP metabolism but also to increase the abundance of other BaP degraders and PAH-RHD genes, resulting in enhanced rhizospheric BaP degradation. Metagenomic and correlation analyses indicated a significant positive relationship between glyoxylate and dicarboxylate metabolism and BaP degradation, suggesting a role for these pathways in rhizospheric BaP biodegradation. By identifying BaP degraders and characterizing their metabolic characteristics within intricate microbial communities, our study offers valuable insights into the mechanisms of bioaugmented rhizoremediation with indigenous bacteria for high-molecular-weight PAHs in petroleum-contaminated soils.

Impact of arsenic and PAHs compound contamination on microorganisms in coking sites: From a community to individual perspective

Arsenic (As) and polycyclic aromatic hydrocarbons (PAHs) are highly toxic, carcinogenic and teratogenic, and are commonly found in soils of industrial sites such as coking plants. They exert environmental stresses on soil microorganisms, but their compounding effects have not been systematically studied. Exploring the effects of compound contamination on microbial communities, species and genes is important for revealing the ecological damage caused by compound contamination and offering scientific insights into soil remediation strategies. In this study, we selected soil samples from 0 to 100 cm depth of a coking site with As, PAHs and compound contamination. We investigated the compound effects of As and PAHs on microbial communities by combining high-throughput sequencing, metagenomic sequencing and genome assembly. Compared with single contamination, compound contamination reduced the microbial community diversity by 10.68%-12.07% and reduced the community richness by 8.39%-18.61%. The compound contamination decreased 32.41%-46.02% of microbial PAHs metabolic gene abundance, 11.36%-19.25% of cell membrane transport gene abundance and 12.62%-57.77% of cell motility gene abundance. Xanthobacteraceae, the biomarker for compound contaminated soils, harbors arsenic reduction genes and PAHs degradation pathways of naphthalene, benzo [a]pyrene, fluorene, anthracene, and phenanthrene. Its broad metabolic capabilities, encompassing sulfur metabolism and quorum sensing, facilitate the acquisition of energy and nutrients, thereby conferring ecological niche advantages in compound contaminated environments. This study underscores the significant impacts of As and PAHs on the composition and function of microbial communities, thereby enriching our understanding of their combined effects and providing insights for the remediation of compound contaminated sites.

Non-phytoremediation and phytoremediation technologies of integrated remediation for water and soil heavy metal pollution: A comprehensive review

Since the 1980s, there has been increasing concern over heavy metal pollution remediation. However, most research focused on the individual remediation technologies for heavy metal pollutants in either soil or water. Considering the potential migration of these pollutants, it is necessary to explore effective integrated remediation technologies for soil and water heavy metals. This review thoroughly examines non-phytoremediation technologies likes physical, chemical, and microbial remediation, as well as green remediation approaches involving terrestrial and aquatic phytoremediation. Non-phytoremediation technologies suffer from disadvantages like high costs, secondary pollution risks, and susceptibility to environmental factors. Conversely, phytoremediation technologies have gained significant attention due to their sustainable and environmentally friendly nature. Enhancements through chelating agents, biochar, microorganisms, and genetic engineering have demonstrated improved phytoremediation remediation efficiency. However, it is essential to address the environmental and ecological risks that may arise from the prolonged utilization of these materials and technologies. Lastly, this paper presents an overview of integrated remediation approaches for addressing heavy metal contamination in groundwater-soil-surface water systems and discusses the reasons for the research gaps and future directions. This paper offers valuable insights for comprehensive solutions to heavy metal pollution in water and soil, promoting integrated remediation and sustainable development.

Mechanistic insight into the effects of interaction between biochar and soil with different properties on phenanthrene sorption

Soil composition varies considerably in nature, so it is vital to investigate the mechanism of the effect of various soil parameters on biochar sorption capacity. In this study, two biochars (W4 and W7) were derived from wheat straw at temperatures of 400 and 700 °C and were incubated with three different soils. Changes in biochar surface features by aging in the soils and the consequent impact on phenanthrene sorption were examined. The results showed that the effect of adding biochar on phenanthrene sorption capacity (Koc) varied by soil. When biochar was freshly mixed with soil, the Koc value in soil with higher clay content was more dramatically altered by biochar, which is due to clay particles adhering to the biochar surface. Moreover, the Koc value was significantly decreased by the addition of W4 but increased by the addition of W7 in general. After aging, most of the Koc value decreased. The greatest decrease in Koc value was observed in biochar and soil composed with the highest clay content for W4 (24-63%), as well as soil composed with the highest organic matter content for W7 (46-64%). This is because the surface polarity and micropores of biochar dropped the most rapidly in these mixes, resulting in a significant decrease in hydrophobic and pore-filling properties. The results revealed that the impact of biochar-soil interactions on phenanthrene sorption is related to not only biochar properties but also soil clay particles, soil organic matter content and pH. The findings of the study can be utilized to assess the efficacy of biochar application in soil remediation for various features.

Effects of biodegradable microplastics coexistence with biochars produced at low and high temperatures on bacterial community structure and phenanthrene degradation in soil

The increasing use of biodegradable plastics may result in more serious pollution of microplastics which often coexist with biochar in soil, this will affect how organic pollutants move and transform in the soil. This work investigated the effect of biodegradable polybutylene adipate-co-terephthalate (PBAT) coexistence with biochars produced at temperatures of 400 and 700 °C (W4 and W7) on soil bacterial communities and phenanthrene degradation. The results showed that coexistence of PBAT and biochar paticles greatly boosted the relative abundance of Nocardioides while decreased the relative abundance of Sphingomonas as compared to soils with a single addition of PBAT or biochar. Changes in soil Eh values were the most influential factor in bacterial communities (more than 40% contribution). The degradation ratio of phenanthrene when PBAT coexisted with W7 (39.6 ± 3.6%) was not significantly different from the treatment with a single W7 addition (35.0 ± 2.3%, P＞0.05), and was related to phenanthrene degradation in the adsorbed state of W7 in soil. In contrast, the degradation ratio of phenanthrene in PBAT coexisting with W4 (35.1 ± 3.5%) was intermediate between that of single PBAT (49.8 ± 0.9%) and W4 (13.7 ± 5.8%) treatments. This was primarily due to changes in the experiment's initial bioavailable phenanthrene content. Furthermore, after the introduction of earthworms, phenanthrene degradation ratio in coexistence treatments were very similar to that described above in the absence of earthworms. Except for two treatments that contain W7, phenanthrene degradation ratio in the other treatments was increased by the presence of earthworms (up to 23%), which is related to the enhanced relative abundance of polycyclic aromatic hydrocarbon-degraders. Our findings indicated that PBAT coexistence with high-temperature or low-temperature biochar had a completely different impact on bacterial communities and phenanthrene degradation in soil.

Enhancing polycyclic aromatic hydrocarbon soil remediation in cold climates using immobilized low-temperature-resistant mixed microorganisms

Polycyclic aromatic hydrocarbons (PAHs), widespread organic pollutants, significantly impact human health and environmental integrity. Recent approaches to ameliorate PAH-contaminated soils, particularly in cold environments, have been insufficient. This study investigates the use of immobilized low-temperature-resistant mixed microorganisms (LTRMM) for enhancing the degradation of PAHs in soils from coke plants and the Shenfu irrigation area. Our results demonstrate that treatment with immobilized mixed microorganisms (MC-HS) is more effective than treatments with free bacteria (H-S) and control (CK). Specifically, the degradation rates in the MC-HS1 treatment were 10.10 %-41.13 % higher than those in the coking plant soil treated with CK1 and H-S1. Similarly, in the Shenfu irrigation area soil, MC-HS2 showed improvements of 6.00 % to 52.56 % over CK2 and H-S2. A kinetic model was used to analyze the enhanced degradation capabilities, revealing that the half-life of PAHs under the immobilized mixed microorganism treatment (T3) was significantly shorter compared to the free bacteria (T2) and control treatments (T1). These findings suggest that employing immobilized LTRMM could significantly improve the remediation efficiency of PAH-contaminated soils in cold climates.

An Assessment of Polycyclic Aromatic Hydrocarbons Using Estimation Programs

In the environment, the class of chemicals known as polycyclic aromatic hydrocarbons (PAHs) behave somewhat differently. This review covers situations where PAHs can be 'labile' and where they can be persistent. The in-silico prediction of toxicity and the properties of selected 29 PAHs were estimated using programs developed by the U.S. Environmental Protection Agency (EPA), such as the Estimation Programs Interface (E.P.I.) and the Toxicity Estimation Software Tool (version 5.1.2) (TEST), with online software such as SwissADME and SwissDock. TEST was used to estimate the LC50 of the fathead minnow (with a range of 14.53 mg/L for 1-indanone and 2.14 × 10-2 mg/L for cyclopenta[c,d]pyrene), the LC50 of Daphnia magna (with a range of 14.95 mg/L for 1-indanone and 7.53 × 10-2 mg/L for coronene), the IGC50 of Tetrahymena pyriformis (with a range of 66.14 mg/L for 1-indanone and 0.36 mg/L for coronene), the bioconcentration factor (8.36 for 1,2-acenaphthylenedione and 910.1 for coronene), the developmental toxicity (0.30 (-) for 1,2-acenaphthylenedione and 0.82 (+) for 4-hydroxy-9-fluorenone), and the mutagenicity (0.25 (-) for 2-methyl-9-fluorenone and 1.09 (+) for coronene). The carbon chain and molecular weight have a significant effect on the properties of PAHs. Overall, it was found that PAHs with a lower molecular weight (LMW) have a higher water solubility and LC50 value and a smaller LogKow value, whereas the opposite is true for heavier PAHs, with TEST predicting that PAHs with an MW of over 168.2 g/mol, with a few exceptions, are mutagenic. Hence, LMW PAHs have a higher potential to be in the environment but are less toxic.

Bioremediation of PAHs-contaminated site in a full-scale biopiling system with immobilized enzymes: Removal efficiency and microbial communities

Bioremediation of PAHs-contaminated soil by immobilized enzymes is a promising technology. Nevertheless, the practical implementation of highly efficient enzymatic remediation remains confined to laboratory settings, with limited experience in full-scale applications. In this study, the extracellular enzymes from white rot fungi are fully applied to treat sites contaminated with PAHs by combining a new hydrogel microenvironment and a biopiling system. The full-scale project was conducted on silty loam soil contaminated with PAHs. In line with China's guidelines for construction land, 7 out of the 12 PAHs identified are considered to be a threat to the soil quality of construction sites, with benzo[a]pyrene levels reaching 1.50 mg kg-1, surpassing the acceptable limit of 0.55 mg kg-1 for the first type of land. After 7 days of remediation, the benzo[a]pyrene level decreased from 1.50 mg kg-1 to 0.51 mg kg-1, reaching the remediation standard of Class I screening values, with a removal rate of 66%. Microbiomes were utilized to assess the microbial biodiversity and structure analyses for PAHs biodegradation. The remediation enhanced the abundance of dominant bacterium (Marinobacter, Pseudomonas, and Truepera) and fugin (Thielavia, Neocosmospora, and Scedosporium). The research offers further insights into the exploration of soil remediation on the full-scale of the immobilized enzyme and biopiling technology.

DNA stable isotope probing reveals the impact of trophic interactions on bioaugmentation of soils with different pollution histories

BACKGROUND

Bioaugmentation is considered a sustainable and cost-effective methodology to recover contaminated environments, but its outcome is highly variable. Predation is a key top-down control mechanism affecting inoculum establishment, however, its effects on this process have received little attention. This study focused on the impact of trophic interactions on bioaugmentation success in two soils with different pollution exposure histories. We inoculated a 13C-labelled pollutant-degrading consortium in these soils and tracked the fate of the labelled biomass through stable isotope probing (SIP) of DNA. We identified active bacterial and eukaryotic inoculum-biomass consumers through amplicon sequencing of 16S rRNA and 18S rRNA genes coupled to a novel enrichment factor calculation.

RESULTS

Inoculation effectively increased PAH removal in the short-term, but not in the long-term polluted soil. A decrease in the relative abundance of the inoculated genera was observed already on day 15 in the long-term polluted soil, while growth of these genera was observed in the short-term polluted soil, indicating establishment of the inoculum. In both soils, eukaryotic genera dominated as early incorporators of 13C-labelled biomass, while bacteria incorporated the labelled biomass at the end of the incubation period, probably through cross-feeding. We also found different successional patterns between the two soils. In the short-term polluted soil, Cercozoa and Fungi genera predominated as early incorporators, whereas Ciliophora, Ochrophyta and Amoebozoa were the predominant genera in the long-term polluted soil.

CONCLUSION

Our results showed differences in the inoculum establishment and predator community responses, affecting bioaugmentation efficiency. This highlights the need to further study predation effects on inoculum survival to increase the applicability of inoculation-based technologies. Video Abstract.

Metabolic engineering of Pseudomonas bharatica CSV86T to degrade Carbaryl (1-naphthyl-N-methylcarbamate) via the salicylate-catechol route

Pseudomonas bharatica CSV86T displays the unique property of preferential utilization of aromatic compounds over simple carbon sources like glucose and glycerol and their co-metabolism with organic acids. Well-characterized growth conditions, aromatic compound metabolic pathways and their regulation, genome sequence, and advantageous eco-physiological traits (indole acetic acid production, alginate production, fusaric acid resistance, organic sulfur utilization, and siderophore production) make it an ideal host for metabolic engineering. Strain CSV86T was engineered for Carbaryl (1-naphthyl-N-methylcarbamate) degradation via salicylate-catechol route by expression of a Carbaryl hydrolase (CH) and a 1-naphthol 2-hydroxylase (1NH). Additionally, the engineered strain exhibited faster growth on Carbaryl upon expression of the McbT protein (encoded by the mcbT gene, a part of Carbaryl degradation upper operon of Pseudomonas sp. C5pp). Bioinformatic analyses predict McbT to be an outer membrane protein, and Carbaryl-dependent expression suggests its probable role in Carbaryl uptake. Enzyme activity and protein analyses suggested periplasmic localization of CH (carrying transmembrane domain plus signal peptide sequence at the N-terminus) and 1NH, enabling compartmentalization of the pathway. Enzyme activity, whole-cell oxygen uptake, spent media analyses, and qPCR results suggest that the engineered strain preferentially utilizes Carbaryl over glucose. The plasmid-encoded degradation property was stable for 75-90 generations even in the absence of selection pressure (kanamycin or Carbaryl). These results indicate the utility of P. bharatica CSV86T as a potential host for engineering various aromatic compound degradation pathways.IMPORTANCEThe current study describes engineering of Carbaryl metabolic pathway in Pseudomonas bharatica CSV86T. Carbaryl, a naphthalene-derived carbamate pesticide, is known to act as an endocrine disruptor, mutagen, cytotoxin, and carcinogen. Removal of xenobiotics from the environment using bioremediation faces challenges, such as slow degradation rates, instability of the degradation phenotype, and presence of simple carbon sources in the environment. The engineered CSV86-MEC2 overcomes these disadvantages as Carbaryl was degraded preferentially over glucose. Furthermore, the plasmid-borne degradation phenotype is stable, and presence of glucose and organic acids does not repress Carbaryl metabolism in the strain. The study suggests the role of outer membrane protein McbT in Carbaryl transport. This work highlights the suitability of P. bharatica CSV86T as an ideal host for engineering aromatic pollutant degradation pathways.

Analysis of the Adsorption Behavior of Phenanthrene on Microplastics Based on Two-Dimensional Correlation Spectroscopy

Microplastics (MPs), an emerging pollutant, widely co-occur with polycyclic aromatic hydrocarbons (PAHs) in the environment. Therefore, the interaction between MPs and PAHs has been the focus of much attention in recent years. In this study, three types of MPs, i.e., polypropylene, polystyrene, and poly(vinyl chloride), with the same main chain were selected as the adsorbents, with phenanthrene (PHE) as the representative PAHs. The adsorption mechanisms were explored from the perspective of the molecular spectral level using a combination of Fourier transform infrared spectroscopy (FT-IR) with a two-dimensional correlation technique. The adsorption kinetics results showed that the adsorption of PHE on the three MPs was dominated by chemisorption. However, the FT-IR analysis results indicated that no new covalent bond was created during the adsorption process. Based on the above research, a generalized two-dimensional (2D) correlation spectral technique was employed to investigate the sequence of functional group changes during the adsorption process for different MPs. Furthermore, the hybrid 2D correlation spectral technique explored the effect of side groups attached to the main chain molecules of MPs on adsorption. The results showed that for all three MPs, the functional groups in the side chain have a higher affinity for PHE, which is due to their higher hydrophobicity. This study provides a feasible way to analyze the adsorption of pollutants on MPs, and the results are important for understanding the adsorption interaction between PAHs and MPs in the aquatic environment.

Anthracene-Induced Alterations in Liverwort Architecture In Vitro: Potential for Bioindication of Environmental Pollution

Polycyclic aromatic hydrocarbons (PAHs) are widespread globally, primarily due to long-term anthropogenic pollution sources. Since PAHs tend to accumulate in soil sediments, liverwort plants, such as Lunularia cruciata, are susceptible to their adverse effects, making them good models for bioindicators. The aim of this study was to probe the impact of anthracene, a three-ring linear PAH, on the growth parameters of L. cruciata and the relationship established with the internalization of the pollutant throughout the phenology of the plant. Intrinsic plant responses, isolated from external factors, were assessed in vitro. L. cruciata absorbed anthracene from the culture medium, and its bioaccumulation was monitored throughout the entire process, from the gemma germination stage to the development of the adult plant, over a total period of 60 days. Consequently, plants exposed to concentrations higher than 50 μM anthracene, decreased the growth area of the thallus, the biomass and number of tips. Moreover, anthracene also impinged on plant symmetry. This concentration represented the maximum limit of bioaccumulation in the tissues. This study provides the first evidence that architectural variables in liverwort plants are suitable parameters for their use as bioindicators of PAHs.

Polycyclic aromatic hydrocarbons content of food, water and vegetables and associated cancer risk assessment in Southern Nigeria

The polycyclic aromatic hydrocarbon content of water (four surface water, six underground water (borehole water), seven sachet water), barbecued food and their fresh equivalents (barbecued beef, fish, plantain, pork, yam, chicken, chevon, potato, corn), oil (three palm oil, nine vegetable oil), and fresh vegetable samples (water leaf, bitter leaf, cabbage, carrot, cucumber, pumpkin, garlic, ginger, green leaf, Gnetum Africana, onion, pepper) were determined by GC-MS analysis. The current study also determined the estimated lifetime cancer risk from ingesting polycyclic aromatic hydrocarbon-contaminated food. The polycyclic aromatic hydrocarbon content of water, oil, vegetable, and food samples were within the United States Environmental Protection Agency/World Health Organization safe limits. The naphthalene, benzo(b)fluoranthene, and benzo(k)fluoranthene levels in surface water were significantly higher than in borehole samples (P = 0.000, 0.047, 0.047). Vegetable oils had higher anthracene and chrysene compared to palm oil (P = 0.023 and 0.032). Significant variations were observed in levels of naphthalene, acenaphthylene, phenanthrene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, and dibenzo(a,h)anthracene among the barbecued and fresh food samples (P <0.05). Barbecued pork, potato, and corn had significantly higher naphthalene compared to their fresh equivalents (P = 0.002, 0.017, and <0.001). Consumption of barbecued food and surface water may be associated with higher exposure risk to polycyclic aromatic hydrocarbons which may predispose to increased cancer health risk. The current work explores in depth the concentration of polycyclic aromatic hydrocarbons in different dietary categories that pose direct risk to humans via direct consumption. These findings add knowledge to support future considerations for human health.

Mechanistic Implications of the Varying Susceptibility of PAHs to Pyro-Catalytic Treatment as a Function of Their Ionization Potential and Hydrophobicity

Transition metal catalysts in soil constituents (e.g., clays) can significantly decrease the pyrolytic treatment temperature and energy requirements for efficient removal of polycyclic aromatic hydrocarbons (PAHs) and, thus, lead to more sustainable remediation of contaminated soils. However, the catalytic mechanism and its rate-limiting steps are not fully understood. Here, we show that PAHs with lower ionization potential (IP) are more easily removed by pyro-catalytic treatment when deposited onto Fe-enriched bentonite (1.8% wt. ion-exchanged content). We used four PAHs with decreasing IP: naphthalene > pyrene > benz(a)anthracene > benzo(g,h,i)perylene. Density functional theory (DFT) calculations showed that lower IP results in stronger PAH adsorption to Fe(III) sites and easier transfer of π-bond electrons from the aromatic ring to Fe(III) at the onset of pyrolysis. We postulate that the formation of aromatic radicals via this direct electron transfer (DET) mechanism is the initiation step of a cascade of aromatic polymerization reactions that eventually convert PAHs to a non-toxic and fertility-preserving char, as we demonstrated earlier. However, IP is inversely correlated with PAH hydrophobicity (log Kow), which may limit access to the Fe(III) catalytic sites (and thus DET) if it increases PAH sorption to soil OM. Thus, ensuring adequate contact between sorbed PAHs and the catalytic reaction centers represents an engineering challenge to achieve faster remediation with a lower carbon footprint via pyro-catalytic treatment.

Ecological and human health impact assessments based on long-term monitoring of soil PAHs near a coal-fired power plant

The combustion of coal in power plants releases significant amounts of polycyclic aromatic hydrocarbons (PAHs), which are highly toxic and carcinogenic. This study assesses the ecological and human health impacts of PAHs contamination from a coal-fired power plant over 8 years. The monitoring site selection considered the distance from the power plant and the prevailing wind direction in the investigated area. The results reveal that, during the monitoring period, PAH levels increased on average by 43%, 61%, and 37% in the zone of the prevailing wind direction, in the area proximate to the power plant, and the zone distant from it, respectively. The site, which has a radius of 4.5 km in the prevailing wind direction, exhibited the highest ecological and human health impacts. Additionally, a strong correlation was observed between environmental and human health impacts, depending on the distance from the power plant, particularly in areas with the prevailing wind direction. These insights contribute to a comprehensive understanding of the intricate dynamics linking power plant emissions, PAHs contamination, and their far-reaching consequences on the environment and human health.

Fulvic acid enhancing pyrene biodegradation by immobilized Stenotrophomonas maltophilia: Effect and mechanism

Immobilization technology is a promising way to improve effectiveness and stability of microbial remediation for polycyclic aromatic hydrocarbons (PAHs), in which carrier material is one of key factors restricting removal efficiency. In this study, fulvic acid-wheat straw biochar (FA/WS) composites were applied for immobilization of an efficient PAHs degrading bacterium Stenotrophomonas maltophilia (SPM). FA/WS&SPM showed superior degradation capacity than free bacteria and biochar-immobilized bacteria, with the removal efficiency of pyrene (20 mg L-1) reaching 90.5 % (7 days). Transcriptome analysis revealed that FA in the carrier materials can promote transportation and degradation of pyrene, and cell growth, as well as inhibit cell apoptosis. Enzyme activity and degradation products detection showed that SPM utilized both phthalic acid and salicylic acid metabolic pathways to degrade pyrene. Practicality of FA/WS&SPM for different kinds of PAHs remediation had been verified in contaminated soil, demonstrating a great potential in the field of PAHs polluted sites remediation.

Polycyclic aromatic hydrocarbon: underpinning the contribution of specialist microbial species to contaminant mitigation in the soil

The persistence of PAHs poses a significant challenge for conventional remediation approaches, necessitating the exploration of alternative, sustainable strategies for their mitigation. This review underscores the vital role of specialized microbial species (nitrogen-fixing, phosphate-solubilizing, and biosurfactant-producing bacteria) in tackling the environmental impact of polycyclic aromatic hydrocarbons (PAHs). These resistant compounds demand innovative remediation strategies. The study explores microbial metabolic capabilities for converting complex PAHs into less harmful byproducts, ensuring sustainable mitigation. Synthesizing literature from 2016 to 2023, it covers PAH characteristics, sources, and associated risks. Degradation mechanisms by bacteria and fungi, key species, and enzymatic processes are examined. Nitrogen-fixing and phosphate-solubilizing bacteria contributions in symbiotic relationships with plants are highlighted. Biosurfactant-producing bacteria enhance PAH solubility, expanding microbial accessibility for degradation. Cutting-edge trends in omics technologies, synthetic biology, genetic engineering, and nano-remediation offer promising avenues. Recommendations emphasize genetic regulation, field-scale studies, sustainability assessments, interdisciplinary collaboration, and knowledge dissemination. These insights pave the way for innovative, sustainable PAH-contaminated environment restoration.

Effect of liming on polycyclic aromatic hydrocarbons leaching from hydrocarbon-contaminated tectogenic industriosol

Soil stabilization/solidification is commonly employed remediation method for contaminated soils. Until now, limited attention has been given to the application of quicklime in polycyclic aromatic hydrocarbons (PAHs) contaminated soil. We treated a tectogenic industriosol spiked with 50 mg kg-1 of four PAHs (12.5 mg kg-1 each of fluorene (FLU), phenanthrene (PHE), fluoranthene (FLT) and pyrene (PYR)) using three different liming agents at 1% (w:w): quicklime (CaO), hydrated lime (Ca(OH)2) and carbonate calcium (CaCO3). All treated samples were leached in water at a solid-liquid ratio of 10, with subsequent analysis of leached soil and leachates for PAHs content. Results revealed that the addition of liming agents led to a reduction in FLU and PHE concentrations in treated soil by 6.81 ± 2.47% and 28.88 ± 4.18%, respectively, compared to a not-treated sol. However, no significant impact was observed on the 4-cycles PAHs (FLT and PYR). The addition of liming agents also significantly decreased the amount of PAHs in the leachate, by 100% for FLU and PHE, and by 74.9 ± 17.5% and 72.3 ± 34.8%, for FLT and PYR, respectively, compared to not limed soil. Among the liming agents, quicklime was the most effective in reducing the amount of 4 cycles PAHs in the leachate. Various mechanisms, such as encapsulation, volatilization and oxidation could contribute to this observed reduction. Quicklime treatment at a concentration of 1% w:w in PAHs-contaminated soil emerges as a promising technique to effectively reduce PAHs concentration in soils and mitigate PAHs mobility through leaching. This study also sheds light on the possibility to limit CO2 emissions and resources exploitation to assure the remediation process, thereby enhancing its overall environmental sustainability.

Microplastics and PAHs mixed contamination: An in-depth review on the sources, co-occurrence, and fate in marine ecosystems

Microplastics (MPs) and polycyclic aromatic hydrocarbons (PAHs) are toxic contaminants that have been found in marine ecosystems. This review aims to explore the sources and mechanisms of PAHs and MPs mixed contamination in marine environments. Understanding the released sources of PAHs and MPs is crucial for proposing appropriate regulations on the release of these contaminants. Additionally, the mechanisms of co-occurrence and the role of MPs in distributing PAHs in marine ecosystems were investigated in detail. Moreover, the chemical affinity between PAHs and MPs was proposed, highlighting the potential mechanisms that lead to their persistence in marine ecosystems. Moreover, we delve into the various factors influencing the co-occurrence, chemical affinity, and distribution of mixed contaminants in marine ecosystems. These factors, including environmental characteristics, MPs properties, PAHs molecular weight and hydrophobicity, and microbial interactions, were critically examined. The co-contamination raises concerns about the potential synergistic effects on their degradation and toxicity. Interesting, few studies have reported the enhanced photodegradation and biodegradation of contaminants under mixed contamination compared to their individual remediation. However, currently, the remediation strategies reported for PAHs and MPs mixed contamination are scarce and limited. While there have been some initiatives to remove PAHs and MPs individually, there is a lack of research specifically targeting the removal of mixed contaminants. This deficiency highlights the need for further investigation and the development of effective remediation approaches for the efficient remediation of PAHs and MPs from marine ecosystems.

Melamine-based hyper-cross-linked resin for efficient removal of total petroleum hydrocarbons (C10-C32) from aqueous solutions

Petroleum hydrocarbons (PHCs) are produced from industrial discharges, storage leakages, accidental spills, and operational failures. The hazardous nature of PHCs causes serious health risks and threatens the entire aquatic habitat. In this research work, the investigation of the removal of total petroleum hydrocarbons (TPHs) from the contaminated water is carried out utilizing a novel hypercross-linked resin, MAICY, which is generated by condensation of commercially available precursors. The chemical structures of MAICY have been examined extensively by FESEM, FT-IR, solid (CP-MAS) 13C-NMR, and TGA. A comprehensive analysis for adsorption parameters of TPHs has been performed, and different models such as Langmuir and Freundlich isotherms have been employed where the Freundlich isotherm was found to be the best fit for removal of THPs (R2= 0.9991). The results revealed that the performance of MAICY for the adsorption of TPHs from contaminated water gives a maximum adsorption capacity (qe) of 146 mg.g-1. The results of various parameters hinted that the contact time (0.25-4 h), the dosage of adsorbent (0.17 g/L), pH (7), and concentration of TPHs (26.5 mg/L) have controlled the overall adsorptive performance. Moreover, the kinetic data of qe(expt.) and qe(calc.) for adsorption of TPHs disclosed the regression values (R2) for pseudo-first order (R2= 0.9921) and pseudo-second order (R2= 0.9891). Additionally, based on CHI factor (X2) error estimations, the data was shown to be more consistent with pseudo-first-order kinetics. Moreover, MAICY demonstrated excellent reusability and recycling properties for up to four consecutive adsorption-desorption cycles.

Machine learning models for predicting thermal desorption remediation of soils contaminated with polycyclic aromatic hydrocarbons

Among various remediation methods for organic-contaminated soil, thermal desorption stands out due to its broad treatment range and high efficiency. Nonetheless, analyzing the contribution of factors in complex soil remediation systems and deducing the results under multiple conditions are challenging, given the complexities arising from diverse soil properties, heating conditions, and contaminant types. Machine learning (ML) methods serve as a powerful analytical tool that can extract meaningful insights from datasets and reveal hidden relationships. Due to insufficient research on soil thermal desorption for remediation of organic sites using ML methods, this study took organic pollutants represented by polycyclic aromatic hydrocarbons (PAHs) as the research object and sorted out a comprehensive data set containing >700 data points on the thermal desorption of soil contaminated with PAHs from published literature. Several ML models, including artificial neural network (ANN), random forest (RF), and support vector regression (SVR), were applied. Model optimization and regression fitting centered on soil remediation efficiency, with feature importance analysis conducted on soil and contaminant properties and heating conditions. This approach enabled the quantitative evaluation and prediction of thermal desorption remediation effects on soil contaminated with PAHs. Results indicated that ML models, particularly the RF model (R2 = 0.90), exhibited high accuracy in predicting remediation efficiency. The hierarchical significance of the features within the RF model is elucidated as follows: heating conditions account for 52 %, contaminant properties for 28 %, and soil properties for 20 % of the model's predictive power. A comprehensive analysis suggests that practical applications should emphasize heating conditions for efficient soil remediation. This research provides a crucial reference for optimizing and implementing thermal desorption in the quest for more efficient and reliable soil remediation strategies.

Novel enzymes for biodegradation of polycyclic aromatic hydrocarbons identified by metagenomics and functional analysis in short-term soil microcosm experiments

Polycyclic aromatic hydrocarbons (PAHs) are highly toxic, carcinogenic substances. On soils contaminated with PAHs, crop cultivation, animal husbandry and even the survival of microflora in the soil are greatly perturbed, depending on the degree of contamination. Most microorganisms cannot tolerate PAH-contaminated soils, however, some microbial strains can adapt to these harsh conditions and survive on contaminated soils. Analysis of the metagenomes of contaminated environmental samples may lead to discovery of PAH-degrading enzymes suitable for green biotechnology methodologies ranging from biocatalysis to pollution control. In the present study, our goal was to apply a metagenomic data search to identify efficient novel enzymes in remediation of PAH-contaminated soils. The metagenomic hits were further analyzed using a set of bioinformatics tools to select protein sequences predicted to encode well-folded soluble enzymes. Three novel enzymes (two dioxygenases and one peroxidase) were cloned and used in soil remediation microcosms experiments. The experimental design of the present study aimed at evaluating the effectiveness of the novel enzymes on short-term PAH degradation in the soil microcosmos model. The novel enzymes were found to be efficient for degradation of naphthalene and phenanthrene. Adding the inorganic oxidant CaO2 further increased the degrading potential of the novel enzymes for anthracene and pyrene. We conclude that metagenome mining paired with bioinformatic predictions, structural modelling and functional assays constitutes a powerful approach towards novel enzymes for soil remediation.

A systematic review of polycyclic aromatic hydrocarbon pollution: A combined bibliometric and mechanistic analysis of research trend toward an environmentally friendly solution

Pollution caused by polycyclic aromatic hydrocarbons (PAHs) is a significant concern. This concern has become more problematic given the rapid modification of PAHs in the environment during co-contamination to form substituted PAHs. This review aims to integrate bibliometric analysis with a rigorous study of mechanistic insights, resulting in a more comprehensive knowledge of evolving research trends on PAH remediation. The results show that research in this field has progressed over the years and peaked in 2022, potentially due to the redirection of resources toward emerging pollutants, hinting at the dynamic nature of environmental research priorities. During this year, 158,147 documents were published, representing 7 % of the total publications in the field between 2000 and 2023. The different remediation methods used for PAH remediation were identified and compared. Bioremediation, having >90 % removal efficiency, has been revealed to be the best technique because it is cost-effective and easy to operate at large scale in situ and ex-situ. The current challenges in PAH remediation have been detailed and discussed. Implementing innovative and sustainable technologies that target pollutant removal and valuable compound recovery is necessary to build a more robust future for water management.

PAH bioremediation with Rhodococcus rhodochrous ATCC 21198: Impact of cell immobilization and surfactant use on PAH treatment and post-remediation toxicity

Polycyclic aromatic hydrocarbons (PAHs) are prevalent environmental contaminants that are harmful to ecological and human health. Bioremediation is a promising technique for remediating PAHs in the environment, however bioremediation often results in the accumulation of toxic PAH metabolites. The objectives of this research were to demonstrate the cometabolic treatment of a mixture of PAHs by a pure bacterial culture, Rhodococcus rhodochrous ATCC 21198, and investigate PAH metabolites and toxicity. Additionally, the surfactant Tween ® 80 and cell immobilization techniques were used to enhance bioremediation. Total PAH removal ranged from 70-95% for fluorene, 44-89% for phenanthrene, 86-97% for anthracene, and 6.5-78% for pyrene. Maximum removal was achieved with immobilized cells in the presence of Tween ® 80. Investigation of PAH metabolites produced by 21198 revealed a complex mixture of hydroxylated compounds, quinones, and ring-fission products. Toxicity appeared to increase after bioremediation, manifesting as mortality and developmental effects in embryonic zebrafish. 21198's ability to rapidly transform PAHs of a variety of molecular structures and sizes suggests that 21198 can be a valuable microorganism for catalyzing PAH remediation. However, implementing further treatment processes to address toxic PAH metabolites should be pursued to help lower post-remediation toxicity in future studies.

Metabolomics perspectives of the ecotoxicological risks of polycyclic aromatic hydrocarbons: A scoping review

Polycyclic Aromatic Hydrocarbons (PAHs) represent persistent environmental pollutants ubiquitously distributed in the environment. Their presence alongside various other contaminants gives rise to intricate interactions, culminating in profound deleterious consequences. The combination effects of different PAH mixtures on biota remains a relatively unexplored domain. Recent studies have harnessed the exceptional sensitivity of metabolomic techniques to unveil the significant ecotoxicological perils of PAH pollution confronting both human populations and ecosystems. This article furnishes a comprehensive overview of current literature focused on the metabolic repercussions stemming from exposure to complex mixtures of PAHs or PAH-pollution sources using metabolomics approaches. These insights are obtained through a wide range of models, including in vitro assessments, animal studies, investigations on human subjects, botanical specimens, and soil environments. The findings underscore that PAH mixtures induce cellular stress responses and systemic effects, leading to metabolic dysregulations in amino acids, carbohydrates, lipids, and other key metabolites (e.g., organic acids, purines), with specific variations observed based on the organism and PAH compounds involved. Additionally, the ecological consequences of PAH pollutants on plant and soil microbial responses are emphasized, revealing significant changes in stress-related metabolites and nutrient cycling in soil ecosystems. The complex interplay of various PAHs and their metabolic effects on several models, as elucidated through metabolomics, highlight the urgency of further research and the need for comprehensive strategies to mitigate the risks posed by these widespread environmental pollutants.

Sulfur-containing iron carbon nanocomposites activate persulfate for combined chemical oxidation and microbial remediation of petroleum-polluted soil

In this study, sulfur-containing iron carbon nanocomposites (S@Fe-CN) were synthesized by calcining iron-loaded biomass and utilized to activate persulfate (PS) for the combined chemical oxidation and microbial remediation of petroleum-polluted soil. The highest removal efficiency of total petroleum hydrocarbons (TPHs) was achieved at 0.2% of activator, 1% of PS and 1:1 soil-water ratio. The EPR and quenching experiments demonstrated that the degradation of TPHs was caused by the combination of 1O2,·OH, SO4·-, and O2·-. In the S@Fe-CN activated PS (S@Fe-CN/PS) system, the degradation of TPHs underwent two phases: chemical oxidation (days 0 to 3) and microbial degradation (days 3 to 28), with kinetic constants consistent with the pseudo-first-order kinetics of chemical and microbial remediation, respectively. In the S@Fe-CN/PS system, soil enzyme activities decreased and then increased, indicating that microbial activities were restored after chemical oxidation under the protection of the activators. The microbial community analysis showed that the S@Fe-CN/PS group affected the abundance and structure of microorganisms, with the relative abundance of TPH-degrading bacteria increased after 28 days. Moreover, S@Fe-CN/PS enhanced the microbial interactions and mitigated microbial competition, thereby improving the ability of indigenous microorganisms to degrade TPHs.

Revitalizing contaminated lands: A state-of-the-art review on the remediation of mine-tailings using phytoremediation and genomic approaches

The mining industry has historically served as a critical reservoir of essential raw materials driving global economic progress. Nevertheless, the consequential by-product known as mine tailings has consistently produced a substantial footprint of environmental contamination. With annual discharges of mine tailings surpassing 10 billion tons globally, the need for effective remediation strategies is more pressing than ever as traditional physical and chemical remediation techniques are hindered by their high costs and limited efficacy. Phytoremediation utilizing plants for remediation of polluted soil has developed as a promising and eco-friendly approach to addressing mine tailings contamination. Furthermore, sequencing of genomic DNA and transcribed RNA extracted from mine tailings presents a pivotal opportunity to provide critical supporting insights for activities directed towards the reconstruction of ecosystem functions on contaminated lands. This review explores the growing prominence of phytoremediation and metagenomics as an ecologically sustainable techniques for rehabilitating mine-tailings. The present study envisages that plant species such as Solidago chilensis, Festuca arundinacea, Lolium perenne, Polygonum capitatum, Pennisetum purpureum, Maireana brevifolia, Prosopis tamarugo etc. could be utilized for the remediation of mine-tailings. Furthermore, a critical evaluation of the organic and inorganic ammendments that optimize conditions for the remediation of mine tailings is also provided. The focus of this review extends to the exploration of environmental genomics to characterize microbial communities in mining sites. By delving into the multifaceted dimensions of phytoremediation and genomics for mine tailings, this study contributes to the ongoing efforts to revitalize contaminated lands for a sustainable and environmentally friendly future.

A combination of microbial electrolysis cells and bioaugmentation can effectively treat synthetic wastewater containing polycyclic aromatic hydrocarbon

The anaerobic biodegradation of polycyclic aromatic hydrocarbons (PAHs) is challenging due to its toxic effect on the microbes. Microbial electrolysis cells (MECs), with their excellent characteristics of anodic and cathodic biofilms, can be a viable way to enhance the biodegradation of PAHs. This work assessed different cathode materials (carbon brush and nickel foam) combined with bioaugmentation on typical PAHs-naphthalene biodegradation and analyzed the inhibition amendment mechanism of microbial biofilms in MECs. Compared with the control, the degradation efficiency of naphthalene with the nickel foam cathode supplied with bioaugmentation dosage realized a maximum removal rate of 94.5 ± 3.2%. The highest daily recovered methane yield (227 ± 2 mL/gCOD) was also found in the nickel foam cathode supplied with bioaugmentation. Moreover, the microbial analysis demonstrated the significant switch of predominant PAH-degrading microorganisms from Pseudomonas in control to norank_f_Prolixibacteraceae in MECs. Furthermore, hydrogentrophic methanogenesis prevailed in MEC reactors, which is responsible for methane production. This study proved that MEC combined with bioaugmentation could effectively alleviate the inhibition of PAH, with the nickel foam cathode obtaining the fastest recovery rate in terms of methane yield.

A novel mycelial pellet applied to remove polycyclic aromatic hydrocarbons: High adsorption performance & its mechanisms

Mycelial pellets formed by Penicillium thomii ZJJ were applied as efficient biosorbents for the removal of polycyclic aromatic hydrocarbons (PAHs), which are a type of ubiquitous harmful hydrophobic pollutants. The live mycelial pellets were able to remove 93.48 % of pyrene at a concentration of 100 mg/L within 48 h, demonstrating a maximum adsorption capacity of 285.63 mg/g. Meanwhile, the heat-killed one also achieved a removal rate of 65.01 %. Among the six typical PAHs (pyrene, phenanthrene, fluorene, anthracene, fluoranthene, benzo[a]pyrene), the mycelial pellets preferentially adsorbed the high molecular weight PAHs, which also have higher toxicity, resulting in higher removal efficiency. The experimental results showed that the biosorption of mycelial pellets was mainly a spontaneous physical adsorption process that occurred as a monolayer on a homogeneous surface, with mass transfer being the key rate-limiting step. The main adsorption sites on the surface of mycelia were carboxyl and N-containing groups. Extracellular polymeric substances (EPS) produced by mycelial pellets could enhance adsorption, and its coupling with dead mycelia could achieve basically the same removal effect to that of living one. It can be concluded that biosorption by mycelial pellets occurred due to the influence of electrostatic and hydrophobic interactions, consisting of five steps. Furthermore, the potential applicability of mycelial pellets has been investigated considering diverse factors. The mycelia showed high environmental tolerance, which could effectively remove pyrene across a wide range of pH and salt concentration. And pellets diameters and humic acid concentration had a significant effect on microbial adsorption effect. Based on a cost-effectiveness analysis, mycelium pellets were found to be a low-cost adsorbent. The research outcomes facilitate a thorough comprehension of the adsorption process of pyrene by mycelial pellets and their relevant applications, proposing a cost-effective method without potential environmental issues (heat-killed mycelial pellets plus EPS) to removal PAHs.

Examining diverse remediation mechanisms of biochar in soil contaminated with polycyclic aromatic hydrocarbon (PAH) of various ring structures: A global meta-analysis

Biochar is a widely recognized solution for addressing polycyclic aromatic hydrocarbon (PAH) contamination. However, it is unclear how the different physicochemical properties of PAHs affect remediation mechanisms, thereby affecting the remediation efficiency of biochar. In this study, a meta-analysis of 56 studies with 2236 observations was conducted to quantify the contributions of the preparation parameters and physicochemical properties of biochar, soil properties, and application measures to remediation efficiency. The research results revealed that PAH contents in the contaminated soil were significantly reduced by an average of 24.99 % after the application of biochar. Random Forest analysis identified feedstock, biochar SSA, soil pH, and rate of biochar application to be the most critical factors among the four categories. The reduction of PAH contents in the contaminated soil first decreased from 37.61 % to 17.44 % and then increased to 40.29 % with an increase in the number of aromatic rings from 2 to 6. Our study results suggest that biochar prepared from bio-waste at low temperatures could be favorable for reducing the content of NAP in soil. Wood-derived biochar pyrolyzed at a relatively high temperature is recommended for remediation of soil contaminated with PAHs with 5 or 6 aromatic rings. Our study provides a new perspective and an optimized strategy for the remediation of PAH-contaminated soils with biochar.

Formation and biotoxicity of environmentally persistent free radicals in steelworks soil under thermal treatment

Thermal treatment are commonly used to address organic contaminated soils. In particular, the pyrolysis of organic substances can result in the creation of environmentally persistent free radicals (EPFRs). We investigated a steelworks site in Chongqing (China) to observe changes in EPFRs before and after thermal treatment. Our findings revealed that the EPFRs were carbon-centered radicals with a g-factor < 2.0030 and a spin density ranging from n.d.-5.23 × 1015 spins/mg. The formation of EPFRs was driving by polycyclic aromatic hydrocarbons (PAHs), Mn, Cu, and total organic carbon (TOC). Following the thermal treatment, the spin densities of EPFRs increased by a factor of 0.25 to 1.81, with maximum levels reached at 300 °C. High molecular weight PAHs exhibited high heat capacity, enabling the generation of more EPFRs. The thermal decay of EPFRs occurred in two stages, with the shortest 1/e lifetime lasting up to 16.8 h. Raising the temperature or prolonging time can significantly reduce EPFRs levels. Thermal treatment increased the generation of EPFRs, hydroxyl radicals (•OH) and superoxide radical (•O2-), leading to a decrease in bacterial luminescence. Specifically, •OH contributed to approximately 73% of the B. brilliantus inhibition. Our results highlight that the thermal treatment significantly enhance EPFRs concentrations, and the treated soil remained ecologically risky. The knowledge of the formation of EPFRs and their biotoxicity is shedding new light on the thermal treatment risk management.

Degradation of pyrene by Xanthobacteraceae bacterium strain S3 isolated from the rhizosphere sediment of Vallisneria natans: active conditions, metabolite identification, and proposed pathways

Polycyclic aromatic hydrocarbons (PAHs) were typical environmental contaminants that accumulated continuously in sediment. Microbial degradation is the main way of PAH degradation in the natural environment. Therefore, expanding the available pool of microbial resources and investigating the molecular degrading mechanisms of PAHs are critical to the efficient control of PAH-polluted sites. Here, a strain (identified as Xanthobacteraceae bacterium) with the ability to degrade pyrene was screened from the rhizosphere sediment of Vallisneria natans. Response surface analysis showed that the strain could degrade pyrene at pH 5-7, NaCl addition 0-1.5%, and temperature 25-40 °C, and the maximum pyrene degradation (~ 95.4%) was obtained under the optimum conditions (pH 7.0, temperature 28.5 °C, and NaCl-free addition) after 72 h. Also, it was observed that the effect of temperature on the degradation ratio was the most significant. Furthermore, eighteen metabolites were identified by mass spectrometry, among which (2Z)-2-hydroxy-3-(4-oxo-4H-phenalen-3-yl) prop-2-enoic acid, 7-(carboxymethyl)-8-formyl-1-naphthyl acetic acid, phthalic acid, naphthalene-1,2-diol, and phenol were the main metabolites. And the degradation pathway of pyrene was proposed, suggesting that pyrene undergoes initial ortho-cleavage under the catalysis of metapyrocatechase to form (2Z)-2-hydroxy-3-(4-oxo-4H-phenalen-3-yl) prop-2-enoic acid. Subsequently, this intermediate was progressively oxidized and degraded to phthalic acid or phenol, which could enter the tricarboxylic acid cycle. Furthermore, the pyrene biodegradation by the strain followed the first-order kinetic model and the degradation rate changed from fast to slow, with the rate remaining mostly slow in the later stages. The slow biodegradation rate was probably caused by a significant amount of phenol accumulation in the initial stage of degradation, which resulted in a decrease in bacterial activity or death.

Predicting thermal desorption efficiency of PAHs in contaminated sites based on an optimized machine learning approach

Thermal desorption (TD) remediation of polycyclic aromatic hydrocarbon (PAH)-contaminated sites is known for its high energy consumption and cost implications. The key to solving this issue lies in analyzing the PAHs desorption process, defining remediation endpoints, and developing prediction models to prevent excessive remediation. Establishing an accurate prediction model for remediation efficiency, which involves a systematic consideration of soil properties, TD parameters, and PAH characteristics, poses a significant challenge. This study employed a machine learning approach for predicting the remediation efficiency based on batch experiment results. The results revealed that the extreme gradient boosting (XGB) model yielded the most accurate predictions (R2 = 0.9832). The importance of features in the prediction process was quantified. A model optimization scheme was proposed, which involved integrating features based on their relevance, importance, and partial dependence. This integration not only reduced the number of input features but also enhanced prediction accuracy (R2 = 0.9867) without eliminating any features. The optimized XGB model was validated using soils from sites, demonstrating a prediction error of less than 30%. The optimized XGB model aids in identifying the most optimal conditions for thermal desorption to maximize the remediation efficiency of PAH-contaminated sites under relative cost and energy-saving conditions.

Comparative life-cycle sustainability assessment of centralized and decentralized remediation strategies at the city level

Remediation of contaminated soil at industrial sites has become a challenge and an opportunity for sustainable urban land use, considering the substantial secondary impacts resulting from remediation activities. The design of soil remediation strategies for multi-site remediation from a regional perspective is of great significance for cities with a large number of brownfields. Centralized and decentralized facilities have been studied in different environmental fields, yet limited research has focused on centralized soil remediation, specifically the treatment of contaminated soil from different sites through the construction of shared soil treatment facilities. This study proposes a framework for comparing centralized and decentralized strategies for contaminated soil remediation based on the integration of life-cycle sustainability assessment and multi-objective optimization. With Zhuzhou, an industrial city in China, serving as an example, results show that after optimization, the centralized scenario can reduce total environmental impacts by 25 %-41 %. In addition, the centralized scenario can reduce economic costs by 27 %-39 %, saving up to 176 million USD. The advantages of the centralized soil remediation strategy include: (1) increased use of soil washing, (2) reduced use of off-site disposal, and (3) reduced construction and efficient utilization of soil treatment facilities. In conclusion, the centralized strategy is relatively suitable for cities or areas with a large number of medium or small-sized contaminated sites. The built framework can quantitatively evaluate multiple sites soil remediation at both the city and individual site level, allowing for a straightforward and objective comparison with the optimal remediation design.

Composting municipal solid waste and animal manure in response to the current fertilizer crisis - a recent review

The dynamic price increases of fertilizers and the generation of organic waste are currently global issues. The growth of the population has led to increased production of solid municipal waste and a higher demand for food. Food production is inherently related to agriculture and, to achieve higher yields, it is necessary to replenish the soil with essential minerals. A synergistic approach that addresses both problems is the implementation of the composting process, which aligns with the principles of a circular economy. Food waste, green waste, paper waste, cardboard waste, and animal manure are promising feedstock materials for the extraction of valuable compounds. This review discusses key factors that influence the composting process and compares them with the input materials' parameters. It also considers methods for optimizing the process, such as the use of biochar and inoculation, which result in the production of the final product in a significantly shorter time and at lower financial costs. The applications of composts produced from various materials are described along with associated risks. In addition, innovative composting technologies are presented.

Microstructure-dependent CO2-responsive microemulsions for deep-cleaning of oil-contaminated soils

CO2-responsive microemulsion (ME) is considered a promising candidate for deep-cleaning and oil recovery from oil-contaminated soils. Understanding the responsive nature of different microstructures (i.e., oil-in-water (O/W), bicontinuous (B.C.) and water-in-oil (W/O)) is essential for unlocking the potential and mechanisms of CO2-responsive emulsions in complex multiphase systems and providing comprehensive guidance for remediation of oil-contaminated soils. Herein, the responsiveness of microstructures of ME to CO2 trigger was investigated using experimental designs and coarse-grained molecular dynamic simulations. MEs were formed for the first time by a weakly associated pseudo-Gemini surfactant of indigenous organic acids (naphthenic acids, NAs are a class of natural surface-active molecules in crude oil) and tetraethylenepentamine (TEPA) through fine tuning of co-solvent of dodecyl benzene sulfonic acid (DBSA) and butanol. The O/W ME exhibited an optimal CO2-responsive character due to easier proton migration in the continuous aqueous phase and more pronounced dependence of configuration on deprotonated NA ions. Conversely, the ME with W/O microstructure exhibited a weak to none responsive characteristic, most likely attributed to its high viscosity and strong oil-NA interactions. The O/W ME also showed superior cleaning efficiency and oil recovery from oil-contaminated soils. The results from this study provide insights for the design of CO2-responsive MEs with desired performance and guidance for choosing the favorable operating conditions in various industrial applications, such as oily solid waste treatment, enhanced oil recovery (EOR), and pipeline transportation. The insights from this work allow more efficient and tailored design of switchable MEs for manufacturing advanced responsive materials in various industrial sectors and formulation of household products.

High-resolution mass spectrometry-based non-targeted metabolomics reveals toxicity of naphthalene on tall fescue and intrinsic molecular mechanisms

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous at relatively high concentrations by atmospheric deposition, and they are threatening to the environment. In this study, the toxicity of naphthalene on tall fescue and its potential responding mechanism was first studied by integrating approaches. Tall fescue seedlings were exposed to 0, 20, and 100 mg L-1 naphthalene in a hydroponic environment for 9 days, and toxic effects were observed by the studies of general physiological studies, chlorophyll fluorescence, and root morphology. Additionally, Ultra Performance Liquid Chromatography - Electrospray Ionization - High-Resolution Mass Spectrometry (UPLC-ESI-HRMS) was used to depict metabolic profiles of tall fescue under different exposure durations of naphthalene, and the intrinsic molecular mechanism of tall fescue resistance to abiotic stresses. Tall fescue shoots were more sensitive to the toxicity of naphthalene than roots. Low-level exposure to naphthalene inhibited the electron transport from the oxygen-evolving complex (OEC) to D1 protein in tall fescue shoots but induced the growth of roots. Naphthalene induced metabolic change of tall fescue roots in 12 h, and tall fescue roots maintained the level of sphingolipids after long-term exposure to naphthalene, which may play important roles in plant resistance to abiotic stresses.

Physical removal of PAXHs from highly contaminated soil by density differentiation: studying the effectiveness on the molecular level

Contaminated soils from industrial sites, such as for coal mining or manufactured gas production, can contain polycyclic aromatic hydrocarbons (PAHs) with a concentration higher than 10 000 mg kg-1, which require an integrated approach for remediation. A physical treatment by separating organic contaminants from soil materials using the density difference could lower the cost for the upcoming chemical and/or biological treatment. In our study, a highly PAH contaminated soil was separated in a 39% (w/w) calcium chloride solution (ρ = 1.4 g cm-3) via stirring, aeration or ultrasonication. Both first and second methods could separate soil materials from organic particles efficiently. The light fraction comprised around 10% of the total soil weight but 80% of solvent extractable organics (SEO). Optical and transmission electron microscopic analysis showed the light fraction, which consisted of mainly black solid aggregates (BSA), differed strongly from soil materials. Additionally, the original contaminated soil, its light and heavy fractions and the corresponding water phase together with the manually separated BSA were analyzed on the molecular level using ultrahigh resolution mass spectrometry (HRMS) with different atmospheric pressure ionization (API) methods, such as electrospray (ESI) and atmospheric pressure photo ionization (APPI). Results showed that SEO, which were primarily associated with BSA and successfully separated through physical method, contained mainly condensed aromatic ring structures of pure hydrocarbons and nitrogen heterocycles with low oxygen content.

Remediation of heavily PAHs-contaminated soil with high mineral content from a coking plant using surfactant-enhanced soil washing

This study investigated the effectiveness of various surfactants at different concentrations in removing high concentrations of polycyclic aromatic hydrocarbons (PAHs) from soil with high mineral content, focusing on the impact of surfactant treatment on the mobility of the residual PAHs in soil. The results revealed that the cationic surfactant (CTMAB) inhibited removal of PAHs in the whole tested concentration range of 0.1-8 g/L. In contrast, the non-ionic and anionic surfactants (Triton X-100 and SDBS) significantly enhanced removal of PAHs as their amendment concentrations reached 2 g/L and above. Triton X-100 exhibited steadily increased efficacy with increasing amendment concentrations and maintained favorable solubilization capability when continuously amended, making it the preferable choice for remediating PAHs-contaminated soil. Surfactant and water washing processes altered soil physicochemical properties by removing some clay minerals (e.g., faujasite) and organic matter that can bind or sequester PAHs, potentially increasing their extractability and bioavailability in the washed soil, thereby posing higher ecological risks compared to the original one. Although soil washing decreased retention of the remaining PAHs in soil, it did not significantly impact PAHs release from soil by flowing water. These findings provide insights into the long-term effectiveness and ecological impacts of surfactant-enhanced washing as a potential remediation technique for PAHs-contaminated soil.

Analysis of Petrogenic Hydrocarbons in Plant Tissues: A Simple GC-MS-Based Protocol to Distinguish Biogenic Hydrocarbons from Diesel-Derived Compounds

Diesel contamination of farming soils is of great concern because hydrocarbons are toxic to all forms of life and can potentially enter the food web through crops or plants used for remediation. Data on plant ability to uptake, translocate and accumulate diesel-derived compounds are controversial not only due to the probable diverse attitude of plant species but also because of the lack of a reliable method with which to distinguish petrogenic from biogenic compounds in plant tissues. The purpose of this study was to set up a GC-MS-based protocol enabling the determination of diesel-derived hydrocarbons in plants grown in contaminated soil for assessing human and ecological risks, predicting phytoremediation effectiveness and biomass disposal. To this end, two plant species, Vicia sativa L. and Secale cereale L., belonging to two diverse vascular plant families, were used as plant models. They were grown in soil spiked with increasing concentrations of diesel fuel, and the produced biomass was used to set up the hydrocarbon extraction and GC-MSD analysis. The developed protocol was also applied to the analysis of Typha latifolia L. plants, belonging to a different botanical family and grown in a long-time and highly contaminated natural soil. Results showed the possibility of distinguishing diesel-derived compounds from biogenic hydrocarbons in most terrestrial vascular plants, just considering the total diesel compounds in the n-alkanes carbon range C10-C26, where the interference of biogenic compounds is negligible. Diesel hydrocarbons quantification in plant tissues was strongly correlated (0.92 < r2 < 0.99) to the concentration of diesel in spiked soils, suggesting a general ability of the considered plant species to adsorb and translocate relatively low amounts of diesel hydrocarbons and the reliability of the developed protocol.

Impact of organic matter on transformation during thermal remediation of pyrene-contaminated substrates

Thermal remediation (TR) is a broadly applicable technology that is effective at removing volatile and semi-volatile contaminants from soil. However, TR can be costly and inefficient in practice, with underlying removal and transformation mechanisms poorly understood. To better understand the role organic matter plays in removal, a series of experiments was performed with a humic substance, humic modified silica, and a natural soil in the presence of pyrene from 100 to 500 °C and compared to prior experiments using pure minerals. Detection of by-products confirmed that pyrene was removed by transformation in addition to volatilization. Oxidation via hydroxyl radical formation and reductive hydrogenation were both indicated as possible reaction mechanisms promoted by organic matter. Because the presence of bulk water did not impact the extent of pyrene degradation or transformation, it is hypothesized that hydroxyl radicals were produced from soil organic matter functional groups, such as carboxyl and phenol groups, and possibly bound water at elevated temperatures in dry experiments. Additionally, the average oxidation state of carbon in detected by-products increased with temperature in experiments with humic modified silica and soil but not humic substance alone, though the extent of degradation did not significantly change. This shift in oxidation state may indicate that attachment of organic matter to another surface may increase interaction between reactive species. The results of this study show that contaminant transformation in soils during TR significantly contributes to removal, even at temperatures lower than those used in traditional treatment. This information will help to guide the design and operation of TR systems, potentially reducing energy requirements and highlighting the necessity of testing for transformation by-products.

Microbes and microbial strategies in carcinogenic polycyclic aromatic hydrocarbons remediation: a systematic review

Degradation, detoxification, or removal of the omnipresent polycyclic aromatic hydrocarbons (PAHs) from the ecosphere as well as their prevention from entering into food chain has never appeared simple. In this context, cost-effective, eco-friendly, and sustainable solutions like microbe-mediated strategies have been adopted worldwide. With this connection, measures have been taken by multifarious modes of microbial remedial strategies, i.e., enzymatic degradation, biofilm and biosurfactant production, application of biochar-immobilized microbes, lactic acid bacteria, rhizospheric-phyllospheric-endophytic microorganisms, genetically engineered microorganisms, and bioelectrochemical techniques like microbial fuel cell. In this review, a nine-way directional approach which is based on the microbial resources reported over the last couple of decades has been described. Fungi were found to be the most dominant taxa among the CPAH-degrading microbial community constituting 52.2%, while bacteria, algae, and yeasts occupied 37.4%, 9.1%, and 1.3%, respectively. In addition to these, category-wise CPAH degrading efficiencies of each microbial taxon, consortium-based applications, CPAH degradation-related molecular tools, and factors affecting CPAH degradation are the other important aspects of this review in light of their appropriate selection and application in the PAH-contaminated environment for better human-health management in order to achieve a sustainable ecosystem.

Laccase as a useful assistant for maize to accelerate the phenanthrene degradation in soil

Polycyclic aromatic hydrocarbon (PAH) pollution has attracted much attention due to their wide distribution in soil environment and serious harm to human health. In order to establish an efficient and eco-friendly technology for remediation of PAH-contaminated soil, phytoremediation utilizing maize assisted with enzyme remediation was explored in this study. The results showed that the participation of laccase could promote the degradation of phenanthrene (PHE) from soil and significantly reduce the accumulation of PHE in maize. The degradation efficiency of PHE in soil could reach 77.19% under laccase-assisted maize remediation treatment, while the accumulation of PHE in maize roots and leaves decreased by 41.23% and 74.63%, respectively, compared to that without laccase treatment, after 24 days of maize cultivation. Moreover, it was found that laccase addition shifted the soil microbial community structure and promoted the relative abundance of some PAH degrading bacteria, such as Pseudomonas and Sphingomonas. In addition, the activities of some enzymes that were involved in PAH degradation process and soil nutrient cycle increased with the treatment of laccase enzyme. Above all, the addition of laccase could not only improve the removal efficiency of PHE in soil, but also alter the soil environment and reduce the accumulation of PHE in maize. This study provided new perspective for exploring the efficiency of the laccase-assisted maize in the remediation of contaminated soil, evaluating the way for reducing the risk of secondary pollution of plants in the phytoremediation process.

The role of microplastics in the process of laccase-assisted phytoremediation of phenanthrene-contaminated soil

Polycyclic aromatic hydrocarbons (PAHs) are highly toxic organic pollutants widely distributed in terrestrial environments and laccase was considered as an effective enzyme in PAHs bioremediation. However, laccase-assisted phytoremediation of PAHs-contaminated soil has not been reported. Moreover, the overuse of plastic films in agriculture greatly increased the risk of co-existence of PAHs and microplastics in soil. Microplastics can adsorb hydrophobic organics, thus altering the bioavailability of PAHs and ultimately affecting the removal of PAHs from soil. Therefore, this study aimed to evaluate the efficiency of laccase-assisted maize (Zea mays L.) in the remediation of phenanthrene (PHE)-contaminated soil and investigate the effect of microplastics on this remediation process. The results showed that the combined application of laccase and maize achieved a removal efficiency of 83.47 % for soil PHE, and laccase significantly reduced the accumulation of PHE in maize. However, microplastics significantly inhibited the removal of soil PHE (10.88 %) and reduced the translocation factor of PHE in maize (87.72 %), in comparison with PHE + L treatment. Moreover, microplastics reduced the laccase activity and the relative abundance of some PAHs-degrading bacteria in soil. This study provided an idea for evaluating the feasibility of the laccase-assisted plants in the remediation of PAHs-contaminated soil, paving the way for reducing the risk of secondary pollution in the process of phytoremediation.

Microalgae mediated bioremediation of polycyclic aromatic hydrocarbons: Strategies, advancement and regulations

Polycyclic aromatic hydrocarbons (PAHs) are pervasive in the atmosphere and are one of the emerging pollutants that cause harmful effects in living systems. There are some natural and anthropogenic sources that can produce PAHs in an uncontrolled way. Several health hazards associated with PAHs like abnormality in the reproductive system, endocrine system as well as immune system have been explained. The mutagenic or carcinogenic effects of hydrocarbons in living systems including algae, vertebrates and invertebrates have been discussed. For controlling PAHs, biodegradation has been suggested as an effective and eco-friendly process. Microalgae-based biosorption and biodegradation resulted in the removal of toxic contaminants. Microalgae both in unialgal form and in consortium (with bacteria or fungi) performed good results in bioaccumulation and biodegradation. In the present review, we highlighted the general information about the PAHs, conventional versus advanced technology for removal. In addition microalgae based removal and toxicity is discussed. Furthermore this work provides an idea on modern scientific applications like genetic and metabolic engineering, nanomaterials-based technologies, artificial neural network (ANN), machine learning (ML) etc. As rapid and effective methods for bioremediation of PAHs. With several pros and cons, biological treatments using microalgae are found to be better for PAH removal than any other conventional technologies.

Polycyclic Aromatic Hydrocarbons (PAHs) in aquatic ecosystem exposed to the 2020 Baghjan oil spill in upper Assam, India: Short-term toxicity and ecological risk assessment

This study focuses on the short-term contamination and associated risks arising from the release of Polycyclic Aromatic Hydrocarbons (PAHs) due to the 2020 Baghjan oil blowout in upper Assam, India. Shortly after the Baghjan oil blowout, samples were collected from water, sediment, and fish species and examined for PAHs contents. The results of the analysis revealed ΣPAHs concentrations ranged between 0.21-691.31 μg L-1 (water); 37.6-395.8 μg Kg-1 (sediment); 104.3-7829.6 μg Kg-1 (fish). The prevalence of 3-4 ring low molecular weight PAHs compounds in water (87.17%), sediment (100%), and fish samples (93.17%) validate the petrogenic source of origin (oil spill). The geographic vicinity of the oil blowout is rich in wildlife; thus, leading to a significant mass mortality of several eco-sensitive species like fish, plants, microbes, reptiles, amphibians, birds and mammals including the Gangetic River dolphin. The initial ecological risk assessment suggested moderate to high-risk values (RQ >1) of majority PAHs concerning fish, daphnia, and algae species. This study highlights the need for recognizing the potential for short-term exposure to local species. To safeguard local ecosystems from potential future environmental disasters, it is imperative for the government to adopt a precautionary strategy.

Optimisation of PAHs biodegradation by Klebsiella pneumonia and Pseudomonas aeruginosa through response surface methodology

Response Surface Methodology (RSM) with Box-Behnken Design (BBD) is used to optimise the Phenanthrene (PHE) degradation process by Klebsiella pneumoniae (K bacteria) and Pseudomonas aeruginosa (P bacteria). Wherein substrate concentration, temperature, and pH at three levels are used as independent variables, and degradation rate of PHE as dependent variables (response). The statistical analysis, via ANOVA, shows coefficient of determination R2 as 0.9848 with significant P value 0.0001 fitting in second-order quadratic regression model for PAHs removal by Klebsiella pneumonia, and R2 as 0.9847 with significant P value 0.0001 by P bacteria. According to the model analysis, temperature (P < 0.0006) is the most influential factor for PHE degradation efficiency by K bacteria, while pH (P < 0.0001) is the most influential factor for PHE degradation by P bacteria. The predicted optimum parameters for K bacteria, namely, temperature, substrate concentration, and pH are found to be 34.00℃, 50.80 mg/L, and 7.50, respectively, and those for P bacteria are 33.30℃, 52.70 mg/L, and 7.20, respectively. At these optimum conditions, the observed PHE removal rates by two bacteria are found to be 83.36% ± 2.1% and 81.23% ± 1.6% in validation experiments, respectively. Thus RSM can optimise the biodegradation conditions of both bacteria for PHE.

Surfactant-enhanced anoxic degradation of polycyclic aromatic hydrocarbons (PAHs) in aged subsurface soil at high temperature (60 °C)

Thermally enhanced anoxic biodegradation is emerging as a promising method for removing PAHs from subsurface soil. However, some PAHs still remain in soil following remediation with thermally enhanced anoxic degradation due to low bioavailability of these residual PAHs. The effects of five surfactants (Tween 80, TX 100, Brij 30, SDS, and SDBS) on the desorption of PAHs, anoxic degradation of PAHs, and native bacteria in soil at high temperature (60 °C) were evaluated in this study. The desorption of PAHs in soil increased as surfactant concentration increased. Low doses of surfactants (0.08%, w/w) enhanced the growth of potential PAHs degrading bacteria and promoted the anoxic degradation of PAHs, whereas high doses of surfactants (0.3%-0.8%, w/w) displayed the opposite effect, and the degree of inhibition increased with increasing surfactant concentration. The results also indicated that the inhibitory effect of anionic surfactants (SDS and SDBS) on microbial growth and PAHs degradation is stronger than that of nonionic surfactants (Tween 80, TX 100 and Brij 30) at the same concentration. These results suggest a feasible way of enhancing the anoxic degradation of PAHs in soil where heat cannot be effectively utilized when in situ thermal desorption (ISTD) technology is used.

Bioremediation of polycyclic aromatic hydrocarbons contaminated soils: recent progress, perspectives and challenges

The life of all creatures is supported directly or indirectly by soil, which is a significant environmental matrix. The soil has been polluted partly due to increased human activities and population growth, releasing several foreign substances and persistent contaminants. When toxic substances like polycyclic aromatic hydrocarbons (PAHs) are disposed of, the characteristics of the soil are changed, microbial biodiversity is impacted, and items are destroyed. Because of the mutagenicity, carcinogenicity, and toxicity of petroleum hydrocarbons, the restoration and cleanup of PAH-polluted areas represent a severe technological and environmental challenge for long-term growth and development. Although there are several ways to clean up PAH-contaminated soils, much attention is paid to intriguing bacteria, fungus, and their enzymes. Various factors influence PAH breakdown, including pH, temperature, airflow, moisture level, nutrient availability, and degrading microbial populations. This review discusses how PAHs affect soil characteristics and shows that secondary metabolite and carbon dioxide decomposition are produced due to microbial breakdown processes. Furthermore, the advantages of bioremediation strategies were assessed for correct evaluation and considered dependable on each legislative and scientific research level, as analyzed in this review.