Adsorption kinetics and aggregation for three classes of carbonaceous adsorbents in the presence of natural organic matter

Impact of Natural Organic Matter Competition on the Adsorptive Removal of Acetochlor and Metolachlor from Low-Specific UV Absorbance Surface Waters

Although activated carbon adsorption is a very promising process for the removal of organic compounds from surface waters, the removal performance for nonionic pesticides could be adversely affected by co-occurring natural organic matter. Natural organic matter can compete with pesticides during the adsorption process, and the size of natural organic matter affects the removal of pesticides, as low-molecular-weight organics directly compete for adsorbent sites with pesticides. This study aims to investigate the competitive impact of low-molecular-weight organics on the adsorptive removal of acetochlor and metolachlor by four commercial powdered activated carbons. The adsorption features of selected powdered activated carbons were evaluated in surface water samples collected from the influent stream of the filtration process having 2.75 mg/L organic matter and 0.87 L/mg-m specific UV absorbance. The adsorption kinetics and capacities were examined by employing pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetic models and modified Freundlich and Langmuir isotherm models to the experimental data. The competitive removal of acetochlor and metolachlor in the presence of natural organic matter was evaluated for varied powdered activated carbon dosages on the basis of UV and specific UV absorbance values of adsorbed organic matter. The adsorption data were well represented by the modified Freundlich isotherm, as well as pseudo-second-order kinetics. The maximum organic matter adsorption capacities of the modified Freundlich isotherm were observed to be 120.6 and 127.2 mg/g by Norit SX Ultra and 99.5 and 100.6 mg/g by AC Puriss for acetochlor- and metolachlor-containing water samples, respectively. Among the four powdered activated carbons, Norit SX Ultra and AC Puriss provided the highest natural organic matter removal performances with 76 and 72% and 71 and 65% for acetochlor- and metolachlor-containing samples, respectively. Similarly, Norit SX Ultra and AC Puriss were very effective for adsorbing aromatic organics with higher than 80% specific UV absorbance removal efficiency. Metolachlor was almost completely removed by higher than 98% by Norit SX Ultra, Norit SX F Cat, and AC Puriss, even at low adsorbent dosages. However, an adsorbent dose of 100 mg/L and above should be added for all powdered activated carbons, except for Norit SX F Cat, for achieving an acetochlor removal performance of higher than 98%. The competition between low-molecular-weight organics (low-specific UV absorbance) and acetochlor and metolachlor was more apparent at low adsorbent dosages (10-75 mg/L).

Opportunities for in situ electro-regeneration of organic contaminant-laden carbonaceous adsorbents

Adsorptive separation technologies have proven to be effective on organic contaminant removal in aqueous water. However, the breakthrough of contaminants is inevitable and can be at relatively low bed volumes, which makes the regeneration of spent adsorbents an urgent need. Electrochemically induced regeneration processes are given special attention and may provide ease of operation through in situ regeneration avoiding (i) removal and transport adsorbents, and (ii) avoiding use of hazardous chemicals (i.e., organic solvents, acids, or bases). Therefore, this review article critically evaluates the fundamental aspects of in situ electro-regeneration for spent carbons, and later discusses specific examples related to the treatment of emerging contaminants (such as per- and polyfluoroalkyl substances or PFAS). The fundamental concepts of electrochemically driven processes are comprehensively defined and addressed in terms of (i) adsorbent characteristics, (ii) contaminant properties, (iii) adsorption/regeneration driving operational parameters and conditions, and (iv) the competitive effects of water matrices. Additionally, future research needs and challenges to enhance understanding of in situ electro-regeneration applications for organic contaminants (specifically PFAS)-laden adsorbents are identified and outlined as a future key perspective.

The effect of dissolved natural organic matter on adsorption of phenolic compounds on suspended sediments

Phenolic compounds have caused different degrees of negative impacts in aquatic environment. Amino acids, humic acids and carbohydrates are the three dominant types of dissolved natural organic matter (DNOM) in natural water bodies. In this research, the influences of dissolved natural organic matter (DNOM) on the adsorption behaviors of phenol, 2,4-dichlorophenol (DCP) and 2,4,6-trichlorophenol (TCP) in Weihe River suspended sediment were studied by using DL-alanine, fulvic acid and glucose as the representatives of the three types of DNOM. The results of batch adsorption experiments showed that, without DNOM, Langmuir and Freundlich had good fitting effects on the three phenolic compounds and their maximum adsorption capacities were 21.580, 27.768 and 24.758 mg/kg respectively. The presence of amino acids increased adsorption capacities of the phenol and TCP on suspended sediments by approximately 13.84% and 11.56% respectively. The existence of fulvic acid and glucose positively affected the adsorption of phenol, DCP and TCP on suspended sediment. The isothermal adsorption in the coexistence of different DNOM were more consistent with the nonlinear adsorption. Other influence factors including pH, ionic strength and temperature can influence the adsorption behavior to different extents. The impact of dissolved natural organic matter (DNOM) on adsorption should be fully considered when mastering environmental migration and transformation behaviors of phenolic compounds in water-sediments environment.

Occurrence, toxic effects, and mitigation of pesticides as emerging environmental pollutants using robust nanomaterials - A review

Increasing demand of food and agriculture is leading us towards the increasing use and introduction of pesticides to the environment. The upright increase of pesticides in water and associated adverse effects have become a great point of concern to develop proficient methods for their mitigation from water. Various different methods have been traditionally employed for this purpose. Recently, nanotechnology has turned out to be the field of prodigious interest for this purpose, and various specific methods were developed and employed to remove pesticides from water. In this study, nanotechnological methods such as adsorption and degradation have been thoroughly discussed along with their applications and limitations where different types of nanoparticles, nanocomposites, nanotubes, and nanomembranes have played a vital role. However, in this study the most commonly adopted method of adsorption is considered to be the better technique due to its low cost, efficiency, and ease of operation. The adsorption kinetic models were described to explain the efficiency of the nano-adrsorbants in order to evaluate the mass transfer processes. However, various degradation methodologies including photocatalysis and catalytic reduction have also been elaborated. Numerous robust metal, metal oxide and functionalized magnetic nanomaterials have been emphasized, categorized, and compared for the removal of pesticides from water. Additionally, current challenges faced by researchers and future directions have also been provided.

A critical review on the role of abiotic factors on the transformation, environmental identity and toxicity of engineered nanomaterials in aquatic environment

Engineered nanomaterials (ENMs) are at the forefront of many technological breakthroughs in science and engineering. The extensive use of ENMs in several consumer products has resulted in their release to the aquatic environment. ENMs entering the aquatic ecosystem undergo a dynamic transformation as they interact with organic and inorganic constituents present in aquatic environment, specifically abiotic factors such as NOM and clay minerals, and attain an environmental identity. Thus, a greater understanding of ENM-abiotic factors interactions is required for an improved risk assessment and sustainable management of ENMs contamination in the aquatic environment. This review integrates fundamental aspects of ENMs transformation in aquatic environment as impacted by abiotic factors, and delineates the recent advances in bioavailability and ecotoxicity of ENMs in relation to risk assessment for ENMs-contaminated aquatic ecosystem. It specifically discusses the mechanism of transformation of different ENMs (metals, metal oxides and carbon based nanomaterials) following their interaction with the two most common abiotic factors NOM and clay minerals present within the aquatic ecosystem. The review critically discusses the impact of these mechanisms on the altered ecotoxicity of ENMs including the impact of such transformation at the genomic level. Finally, it identifies the gaps in our current understanding of the role of abiotic factors on the transformation of ENMs and paves the way for the future research areas.

Highly efficient porous magnetic polydopamine/copper phosphate with three-dimensional hierarchical nanoflower morphology as a selective platform for recombinant proteins separation

The separation and purification of recombinant pharmaceutical proteins is a fundamental and challenging step in the biotechnology industry. Hierarchical nanostructures with unique features and high stability can be used as efficient adsorbents. In this study, hierarchical magnetic polydopamine-copper phosphate nanoflowers (Cu-PDA MNFs) were synthesized as high-performance magnetic adsorbents in a simple and low-cost method based on green chemistry. The prepared hybrid Cu-PDA MNFs revealed great performance for separating pure recombinant human growth hormone (rhGH) and the rhGH acquired from recombinant Pichia pastoris yeast fermentation. The analysis confirmed that Cu-PDA MNFs exhibited a high adsorption capacity of 257.4 mg rhGH g^-1 Cu-PDA MNFs and a fast adsorption rate for approaching the adsorption equilibrium within less than 30 min with a recovery efficiency of 74% of rhGH from the real sample. In addition, recycling tests demonstrated the stability and recyclability of Cu-PDA MNFs for at least six cycles with almost constant adsorption capacity and no toxicity. Based on these results, Cu-PDA MNFs could be considered as a promising candidate for separation and purification of rhGH. This work presents a new approach to using organic-inorganic nanoflowers as the hierarchical nanostructure for purification of pharmaceutical proteins with high performance.

Adsorption modeling of organic compounds (OCs) by carbon nanotubes (CNTs): role of OC and CNT properties on the linear solvation energy relationship

This study evaluated a comprehensive database for the adsorption of polar and nonpolar organic compounds (OCs) by carbon nanotubes (CNTs) and to use the linear solvation energy relationship (LSER) technique for developing predictive adsorption models of OCs by multi-walled carbon nanotubes (MWCNTs) and single-walled carbon nanotubes (SWCNTs). The results showed that coefficient of determinations (R²) values for all compounds are higher variability in the 200 g/mol molecular weight cutoff (74-99%). When the molecular weight cutoff of all OCs is higher than 200 g/mol, the trend of their R² values is decreased (less than 70%). Among all adsorbate descriptor coefficients, V and B terms are the most significant descriptors (p-values ≤ 0.05) in LSER equations for adsorption of low molecular weight polar and nonpolar OCs by both CNTs. Besides, K_OW normalization of all K_d values did not have significant impact on the regression of the LSER model, indicating that hydrophobic interactions are not sole mechanism for the adsorption of OCs on CNTs. Lastly, SWCNTs exhibited higher polar OCs uptake than MWCNTs, which was attributed to more polar surface of SWCNTs as suggested by its high oxygen content (%10).

A critical review on the interactions of microplastics with heavy metals: Mechanism and their combined effect on organisms and humans

Although individual toxicity of microplastics (MPs) to organism has been widely studied, limited knowledge is available on the interactions between heavy metals and MPs, as well as potential biological impacts from their combinations. The interaction between MPs and heavy metals may alter their environmental behaviors, bioavailability and potential toxicity, leading to ecological risks. In this paper, an overview of different sources of heavy metals on MPs is provided. Then the recent achievements in adsorption isotherms, adsorption kinetics and interaction mechanism between MPs and heavy metals are discussed. Besides, the factors that influence the adsorption of heavy metals on MPs such as polymer properties, chemical properties of heavy metals, and other environmental factors are also considered. Furthermore, potential combined toxic effects from MPs and heavy metals on organisms and human health are further summarized.

Characterization of dissolved organic matter for understanding the adsorption on nanomaterials in aquatic environment: A review

Nanomaterials (NMs) have received tremendous attention as emerging adsorbents for environmental applications. The ever-increasing release into aquatic systems and the potential use in water treatment processes heighten the likelihood of the interactions of NMs with aquatic dissolved organic matter (DOM). Once DOM is adsorbed on NMs, it substantially modifies the surface properties, thus altering the fate and transport of NMs, as well as their toxic effects on (micro)organisms in natural and engineered systems. The environmental consequences of DOM-NMs interaction have been widely studied in the literature. In contrast, a comprehensive understanding of DOM-NM complexes, particularly regarding the controlling factors, is still lacking, and its significance has been largely overlooked. This gap in the knowledge mainly arises from the complex and heterogeneous structures of the DOM, which prompts the urgent need to further characterize the DOM properties to deepen the understanding associated with the adsorption processes on NMs. This review aims to provide in-depth insights into the complex DOM adsorption behavior onto NMs, whether they are metal- or carbon-based materials. First, we summarize the up-to-date analytical methods to characterize the DOM to unravel the underlying adsorption mechanisms. Second, the key DOM characteristics governing the adsorption processes are discussed. Next, the environmental factors, such as the nature of adsorbents and solution chemistry, affecting the DOM-NM interactions, are identified and discussed. Finally, future studies are recommended to fully understand the chemical traits of DOM upon its adsorption onto NMs.

Nickel ferrite nanoenabled graphene oxide (NiFe2O4@GO) as photoactive nanocomposites for water treatment

Nanocomposite materials can enhance the capabilities of water treatment processes such as photocatalysis. In this work, novel light-driven nanocatalysts were synthesized by using nickel ferrite (NiFe₂O₄) to nanoenable graphene oxide (GO) substrates. GO is an emerging 2D nanomaterial with high conductivity and adsorption properties. Moreover, the electric properties of GO improve photocatalytic performance by promoting charge carrier separation. Results of the characterization of the nickel ferrite nanoenabled graphene oxide (NiFe₂O₄@GO) nanocomposites demonstrate that homogeneous and stable photocatalysts were produced. The as-synthesized nanocatalysts enabled complete decolorization of the colored water matrix in short irradiation times of 150 min using minimal catalyst loading at 0.5 g L^-1. The selective hook and destroy mechanism reduced the competitive effect of co-existing ions in solution. Furthermore, the use of specific scavengers helped to elucidate the degradation mechanisms of organic dye methylene blue by NiFe₂O₄@GO nanocomposites.

Magnetic solid phase extraction of heterocyclic aromatic hydrocarbons from environmental water samples with multiwalled carbon nanotube modified magnetic polyamido-amine dendrimers prior to gas chromatography-triple quadrupole mass spectrometer

Present study described a sensitive and efficient method for determination of heterocyclic aromatic hydrocarbons using multiwalled carbon nanotubes modified magnetic polyamido-amine dendrimers (MNPs@PAMAM-Gn@MWCNTs) as adsorbent for magnetic solid-phase extraction (MSPE) coupled with gas chromatography-triple quadrupole mass spectrometer (GC-MS/MS). Some pivotal parameters including PAMAM generation, adsorbent dosage, adsorption time, elution time and volume, pH and humic acid concentration were investigated to achieve the best adsorption efficiencies. Under the optimal conditions, 7-methylquinoline, dibenzothiophene and carbazole had good linearity in the concentration range of 0.005-20 μg L ^- 1, 9-methylcarbazole, 4-methyldibenzothiophene and 4,6-dimethyl dibenzothiophene had good linearity in the concentration range of 0.001-20 μg L ^- 1. All the correlation coefficients were higher than 0.996. The detection limits of the targets were in the range of 2.2 × 10^-4-1.8 × 10^-3 μg L ^- 1 with precisions less than 8.28% (n = 6). The enrichment factors were in the range of 141-147. The spiked recoveries were in the range of 87.0%-115.1% (n = 3). These results indicated that the method could be a reliable alternative tool for monitoring trace heterocyclic aromatic hydrocarbons in environmental water samples.

Rapid uptake of atrazine from aqueous phase by thermally activated MCM-41

This study was designed to prepare an adsorbent without any complex modification process for the removal of atrazine (AZN) from aqueous phase. Thus, Mobil composition of matter No. 41 (MCM-41) was synthesized and modified by physical activation at high temperature (650 °C). The synthesized adsorbent was tested by XRD, SEM, EDX, FT-IR and BET to confirm the successful synthesis as well as effectiveness for the adsorption of AZN. The average particle size of prepared material was found to be about 500 nm, while the BET calculations showed that adsorbent was porous with a specific surface area of 25.9 m²/g. Later, it was used in batch removal studies of AZN for which, it showed a high adsorption capacity of 89.99 (mg/g). The pH of 6, temperature of 313 K was found to be the optimized conditions for the maximum removal of AZN. Of the four kinetic models studied, the pseudo-first-order yielded a superior fit in comparison with the other three models. The results indicated that the five linearized adsorption equilibrium isotherm models (Langmuir, Freundlich, Dubinin-Radushkevich, Temkin and Harkins-Jura models) closely correlate the AZN adsorption removal process with Pearson correlation coefficient (R²) values of 0.9955, 0.8551, 0.8736, 0.8913 and 0.7253, respectively. The energy functions obtained by thermodynamic analysis suggested that the AZN sorption follows a non-spontaneous and endothermic path.

One-dimensional graphene for efficient aqueous heavy metal adsorption: Rapid removal of arsenic and mercury ions by graphene oxide nanoribbons (GONRs)

There is a knowledge gap for the application of one-dimensional graphene in the adsorption process. Our hypothesis was based on the fact that graphene oxide nanoribbons (GONRs) as one-dimensional graphene with more desired edges and specific surface area than other carbonaceous nanomaterials have more oxygen containing functional groups (active sites) on their edges and basal planes and therefore are more capable in adsorption of pollutants. In this regard, we synthesized GONRs by unzipping of multi-walled carbon nanotubes (MWCNTs) and investigated the adsorption behavior of GONRs by ultrasonic-assisted adsorptive removal of As(V) and Hg(II) ions from aqueous solution. The obtained results showed that As(V) ions are more favorably adsorbed onto the GONRs than Hg(II) ions and with increasing initial As(V) and Hg(II) ions concentration to 300 ppm, the equilibrium adsorption uptake of the synthesized GONRs increases to 155.61 and 33.02 mg/g for As(V) and Hg(II) ions, respectively through a rapid separation process in just 12 min. Also, three kinetic models and Freundlich and Langmuir adsorption isotherms were applied to evaluate the obtained experimental results. Our findings highlight the potential application of GONRs as one-dimensional graphene adsorbent with more desired edges than MWCNTs and graphene oxide (GO) and high adsorption capacity for selective removal of heavy metals.

Adsorption kinetic models: Physical meanings, applications, and solving methods

Adsorption technology has been widely applied in water and wastewater treatment, due to its low cost and high efficiency. The adsorption kinetic models have been used to evaluate the performance of the adsorbent and to investigate the adsorption mass transfer mechanisms. However, the physical meanings and the solving methods of the kinetic models have not been well established. The proper interpretation of the physical meanings and the standard solving methods for the adsorption kinetic models are very important for the applications of the kinetic models. This paper mainly focused on the physical meanings, applications, as well as the solving methods of 16 adsorption kinetic models. Firstly, the mathematical derivations, physical meanings and applications of the adsorption reaction models, the empirical models, the diffusion models, and the models for adsorption onto active sites were analyzed and discussed in detail. Secondly, the model validity evaluation equations were summarized based on literature. Thirdly, a convenient user interface (UI) for solving the kinetic models was developed based on Excel software and provided in supplementary information, which is helpful for readers to simulate the adsorption kinetic process.

Effect of molecular structure on the adsorption affinity of sulfonamides onto CNTs: Batch experiments and DFT calculations

In order to investigate the adsorption behaviors of sulfonamides onto hydroxylated multi - walled carbon nanotubes (CNTs) with a porous structure and large specific surface area, six typical sulfonamides including sulfanilamide (SAM), sulfamerazine (SMR), sulfadimethoxine (SMX), sulfadiazine (SDZ), sulfamethazine (SMT) and sulfametoxydiazine (SMD) were selected to be adsorbed respectively on CNTs, and in the same time the structural parameters of the six sulfonamides molecules were calculated according to the density functional theory (DFT). Based upon above mentioned experiments and the structural parameters, the quantitative correlation between the structural parameters of sulfonamides molecules and their adsorption affinity (e.g. adsorption capacity and adsorption rate constant) onto CNTs was established, respectively. The adsorption data of sulfonamides fitted well with the pseudo - second - order kinetic model and the Langmuir isotherm model. The order of both pseudo - second - order kinetic constant and maximum adsorption capacity of the six sulfonamides were SAM < SMR < SMX < SDZ < SMT < SMD. The frontier molecular orbital energy (E_HOMO) and dipole moment (μ) could be used as indicators for the adsorption affinity of sulfonamides onto CNTs. Accordingly, the possible adsorption mechanism was proposed.