A review on the contribution of electron flow in electroactive wetlands: Electricity generation and enhanced wastewater treatment

Improvement of biotic nitrate reduction in constructed photoautotrophic biofilm-soil microbial fuel cells

The biotic nitrate reduction rate in freshwater ecosystems is typically constrained by the scarcity of carbon sources. In this study, 'two-chambers' - 'two-electrodes' photoautotrophic biofilm-soil microbial fuel cells (P-SMFC) was developed to accelerate nitrate reduction by activating in situ electron donors that originated from the soil organic carbon (SOC). The nitrate reduction rate of P-SMFC (0.1341 d-1) improved by ∼ 1.6 times on the 28th day compared to the control photoautotrophic biofilm. The relative abundance of electroactive bacterium increased in the P-SMFC and this bacterium contributed to obtain electrons from SOC. Biochar amendment decreased the resistivity of P-SMFC, increased the electron transferring efficiency, and mitigated anodic acidification, which continuously facilitated the thriving of putative electroactive bacterium and promoted current generation. The results from physiological and ecological tests revealed that the cathodic photoautotrophic biofilm produced more extracellular protein, increased the relative abundance of Lachnospiraceae, Magnetospirillaceae, Pseudomonadaceae, and Sphingomonadaceae, and improved the activity of nitrate reductase and ATPase. Correspondingly, P-SMFC in the presence of biochar achieved the highest reaction rate constant for nitrate reduction (kobs) (0.2092 d-1) which was 2.4 times higher than the control photoautotrophic biofilm. This study provided a new strategy to vitalize in situ carbon sources in paddy soil for nitrate reduction by the construction of P-SMFC.

Saturated constructed wetland-microbial fuel cell system and effect on dissolved oxygen gradient, electricity generation and ammonium removal

The aim of this work was to assess effect of saturated constructed wetland-Microbial fuel cell system on dissolved oxygen gradient, electricity generation and ammonium removal. Two laboratory-scale systems, one planted with Schoenoplectus californicus (SCW1-MFC) and other without plant (SCW2-MFC), were fed discontinuously with synthetic wastewater over 90 days. Both systems were operated at different organic loading rate (12 and 28 g COD/m2d) and ammonium loading rate (1.6 and 3.0 g NH4+- N/m2 d) under open circuit and close circuit mode. The results indicate that between lower and upper zones of wetlands the average values were in the range of 1.22 ± 0.32 to 1.39 ± 0.27 mg O2/L in SCW1-MFC and 1.28 ± 0.24 to 1.56 ± 0.31 mg O2/L in SCW2-MFC. The effect of operating mode (closed and open circuit) and vegetation on DO was not significant (p > 0.05). Chemical oxygen demand (COD) removal efficiencies, fluctuated between 90 and 95% in the SCW1-MFC and 82 and 94% in the SCW2-MFC system. Regarding NH4+- N, removal efficiencies were above 85% in both systems reaching values maximus 98%. The maximum power density generated was 4 and 10 mW/m2 in SCW1-MFC, while SCW2-MFC recorded the highest values (12 and 22 mW/m2).

Electrogenic engineered flow through tri-phasic wetland system for azo dye treatment: Microbial dynamics and functional metagenomics

Electrogenic engineered flow through tri-phasic wetland (EEFW) system based on nature-based ecological principles was studied by integrating successive biological microenvironments. The potential mechanism of the plant root-based microbial community and its functional diversity with the influence of plant-microbe-electrode synergism towards dye degradation was evaluated. The EEFW system was operated at three varied dye loads of 10, 25 and 50 mg L-1, where the results from the cumulative outlets revealed a maximum dye removal efficiency of 96%, 96.5% and 93%, respectively. Microbial community analysis depicted synergistic dependence on the plant-microbe-electrode interactions, influencing their functional diversity and metabolism towards detoxification of pollutants. The core microbial taxa enriched against the microenvironment variation were mostly associated with carbon and dye removal viz., Desulfomonile tiedjei and Rhodopseudomonas palustris in Tank 1 and Chloroflexi bacterium and Steroidobacter denitrificans in Tank 2. The degradation of polycyclic aromatic hydrocarbons, chloroalkane/chloroalkene, nitrotoluene, bisphenol, caprolactam and 1,1,1-trichloro-2,2-bis(4-chlorophenyl) ethane (DDT) were observed to be predominant in Tank 1. EEFW system could be one of the option for utilizing nature-based processes for the treatment of wastewater by self-induced bioelectrogenesis to augment process efficiency.

The race between classical microbial fuel cells, sediment-microbial fuel cells, plant-microbial fuel cells, and constructed wetlands-microbial fuel cells: Applications and technology readiness level

Microbial fuel cell (MFC) is an interesting technology capable of converting the chemical energy stored in organics to electricity. It has raised high hopes among researchers and end users as the world continues to face climate change, water, energy, and land crisis. This review aims to discuss the journey of continuously progressing MFC technology from the lab to the field so far. It evaluates the historical development of MFC, and the emergence of different variants of MFC or MFC-associated other technologies such as sediment-microbial fuel cell (S-MFC), plant-microbial fuel cell (P-MFC), and integrated constructed wetlands-microbial fuel cell (CW-MFC). This review has assessed primary applications and challenges to overcome existing limitations for commercialization of these technologies. In addition, it further illustrates the design and potential applications of S-MFC, P-MFC, and CW-MFC. Lastly, the maturity and readiness of MFC, S-MFC, P-MFC, and CW-MFC for real-world implementation were assessed by multicriteria-based assessment. Wastewater treatment efficiency, bioelectricity generation efficiency, energy demand, cost investment, and scale-up potential were mainly considered as key criteria. Other sustainability criteria, such as life cycle and environmental impact assessments were also evaluated.

Methane emission reduction oriented extracellular electron transfer and bioremediation of sediment microbial fuel cell: A review

Sediment is the internal and external source of water environment pollution, so sediment remediation is the premise of water body purification. Sediment microbial fuel cell (SMFC) can remove the organic pollutants in sediment by electroactive microorganisms, compete with methanogens for electrons, and realize resource recycling, methane emission inhibiting and energy recovering. Due to these characteristics, SMFC have attracted wide attention for sediment remediation. In this paper, we comprehensively summarized the recent advances of SMFC in the following areas: (1) The advantages and disadvantages of current applied sediment remediation technologies; (2) The basic principles and influencing factors of SMFC; (3) The application of SMFC for pollutant removal, phosphorus transformation and remote monitoring and power supply; (4) Enhancement strategies for SMFC in sediments remediation such as SMFC coupled with constructed wetland, aquatic plant and iron-based reaction. Finally, we have summarized the drawback of SMFC and discuss the future development directions of applying SMFC for sediment bioremediation.

Transformation from biofiltration unit to hybrid constructed wetland-microbial fuel cell: Improvement of wastewater treatment performance and energy recovery

This study aimed to compare the performance of biofiltration, constructed wetland, and constructed wetland microbial fuel cell (CW-MFC). The transformation from a biofiltration unit to a hybrid CW-MFC was demonstrated with the advantages of improvement of wastewater treatment while generating electricity simultaneously. The introduction of plants to the upper region of the bioreactor enhanced the DO level by 0.8 mg/L, ammonium removal by 5 %, and COD removal by 1 %. The integration of electrodes and external circuits stimulated the degradation rate of organic matter in the anodic region (1 % without aeration and 3 % with aeration) and produced 5.13 mW/m³ of maximum power density. Artificial aeration improved the nitrification efficiency by 38 % and further removed the residual COD to an efficiency of 99 %. The maximum power density was also increased by 3.2 times (16.71 mW/m³) with the aid of aeration. In treating higher organic loading wastewater (3M), the maximum power density showed a significant increment to 78.01 mW/m³ (4.6-fold) and the COD removal efficiency was 98 %. The ohmic overpotential dominated the proportion of total loss (67-91 %), which could be ascribed to the low ionic conductivity. The reduction in activation and concentration loss contributed to the lower internal resistance with the additional aeration and higher organic loading. Overall, the transformation from biofiltration to a hybrid CW-MFC system is worthwhile since the systems quite resemble while CW-MFC could improve the wastewater treatment as well as recover energy from the treated wastewater.

Insights into the decolorization of mono and diazo dyes in single and binary dyes containing wastewater and electricity generation in up-flow constructed wetland coupled microbial fuel cell

The treatment of single and binary azo dyes, as well as the effect of the circuit connection, aeration, and plant on the performance of UFCW-MFC, were explored in this study. The decolorization efficiency of Remazol Yellow FG (RY) (single dye: 98.2 %; binary dye: 92.3 %) was higher than Reactive Black 5 (RB5) (single: 92.3 %; binary: 86.7 %), which could be due to monoazo dye (RY) requiring fewer electrons to break the azo bond compared to the diazo dye (RB5). In contrast, the higher decolorization rate of RB5 in binary dye indicated the removal rate was affected by the electron-withdrawing groups in the dye structure. The closed circuit enhanced about 2% of color and 4% of COD removal. Aeration improved the COD removal by 6%, which could be contributed by the mineralization of intermediates. The toxicity of azo dyes was reduced by 11-26% and the degradation pathways were proposed. The dye removal by the plants was increased with a higher contact time. RB5 was more favorable to be uptook by the plant as RB5 holds a higher partial positive charge. 127.39 (RY), 125.82 (RB5), and 58.66 mW/m³ (binary) of maximum power density were generated. The lower power production in treating the binary dye could be due to more electrons being utilized for the degradation of higher dye concentration. Overall, the UFCW-MFC operated in a closed circuit, aerated, and planted conditions achieved the optimum performance in treating binary azo dyes containing wastewater (dye: 87-92%; COD: 91%) compared to the other conditions (dye: 83-92%; COD: 78-87%).

Effects of the bioelectrochemical technique on methane emission and energy recovery in constructed wetlands (CWs) and related biological mechanisms

In this study, effects of bioelectrochemical technique on methane emission and energy recovery, and related mechanism underlying microbial competition were investigated. The results showed that running MFC was beneficial in reducing CH₄ emissions and promoting COD removal rates, regardless of whether the plant roots were located at the anode or the cathode. CH₄ emission was significantly higher in open-circuit reactors (6.2 mg m^-2 h^-1) than in closed-circuit reactors (3.1 mg m^-2 h^-1). Plant roots at the cathode had the highest electricity generation and the lowest CH4 emissions. The highest power generation (0.49 V, 0.33 w m^-3) and the lowest CH₄ emissions (2.3 mg m^-2 h^-1) were observed in the reactors where Typha orientalis was planted with plant roots at the cathode. The role of plants in strengthening electron acceptor was greater than that of plant rhizodeposits in strengthening electron donors. Real-time quantitative PCR (q-PCR) and correlation analysis indicated that the mcrA genes and CH₄ emissions were positively correlated (r = 0.98, p < 0.01), while no significant relationship between CH₄ emissions and pmoA genes was observed. Illumina sequencing revealed that more abundant exoelectrogens and denitrifying bacteria were observed when plant roots were located in cathodes. Strictly acetotrophic archae (Methanosaetaceae) were likely the main electron donor competitors with exoelectrogens. The results showed that the location of both plant species and plant roots at the electrode played an important role in CH₄ control and electricity generation. Therefore, it is necessary to strengthen plant configuration to reduce CH₄ emissions, to promote sustainable development of wastewater treatment.

Effects of electroconductive materials on treatment performance and microbial community structure in biofilter systems with silicone tubings

Biofilter systems coupling with microbial electrochemical technology can enhance the removal performance of pollutants. In this study, two types of coke (PK-A and PK-LSN) were used as electroconductive substrates in biofilter systems with silicone tubings. The results showed that the silicone tubings were beneficial for removing NH₄⁺-N. The PK-A systems reached removal efficiencies up to 83.5-85.3% for NH₄⁺-N without aeration. Compared to gravel systems, significantly higher removal efficiencies of NO₃^--N (84.8-95.4%) were obtained in coke systems, and better removal of PO₄^3--P (91.9-95.7%) was also simultaneously achieved in PK-A systems. Redundancy analysis (RDA) indicated that the better performances of coke systems rely on the functions of both electroactive (Trichococcus and Sulfurovum) and non-electroactive bacteria (Clostridium_sensu_stricto_1, Propionicicella, and Acinetobacter). These findings highlight the important contribution of silicone tubings to oxygen supply and provide useful guidance for the application of coke in composite matrix systems.

Insights into the fate of antibiotics in constructed wetland systems: Removal performance and mechanisms

Antibiotics have been recognized as emerging contaminants that are widely distributed and accumulated in aquatic environment, posing a risk to ecosystem at trace level. Constructed wetlands (CWs) have been regarded as a sustainable and cost-effective alternative for efficient elimination of antibiotics. This review summarizes the removal of 5 categories of widely used antibiotics in CWs, and discusses the roles of the key components in CW system, i.e., substrate, macrophytes, and microorganisms, in removing antibiotics. Overall, the vertical subsurface flow CWs have proven to perform better in terms of antibiotic removal (>78%) compared to other single CWs. The adsorption behavior of antibiotics in wetland substrates is determined by the physicochemical properties of antibiotics, substrate configuration and operating parameters. The effects of wetland plants on antibiotic removal mainly include direct (e.g., plant uptake and degradation) and indirect (e.g., rhizosphere processes) manners. The possible interactions between microorganisms and antibiotics include biosorption, bioaccumulation and biodegradation. The potential strategies for further enhancement of the antibiotic removal performance in CWs included optimizing operation parameters, innovating substrate, strengthening microbial activity, and integrating with other treatment technologies. Taken together, this review provides useful information for facilitating the development of feasible, innovative and intensive antibiotic removal technologies in CWs, as well as enhancing the economic viability and ecological sustainability.

Mechanism of Fe-C micro-electrolysis substrate to improve the performance of CW-MFC with different factors: Insights of microbes and metabolic function

Constructed wetland-microbial fuel cell (CW-MFC) is a novel technology for wastewater treatment with electrical generation. This work proposed a Fe-C micro-electrolysis substrate (Fe-C) with biomass modified ceramsite to enhance pollutants removal and electricity generation. The key influencing factors were revealed, and the COD, NH₄⁺-N, and TP removal efficiency was respectively increased by 10.2, 8.1 and 8.78% with 76% higher power output at optimal conditions (e.g. OLR 52.5 g/(m².d), HRT 48 h, and aeration rate 800 mL/min). Fe-C based substrates improved the microenvironments in CW-MFC, including dissolved oxygen (DO) and oxidation-reduction potential (ORP) lowering and electron transfer facilitation. These contributed to the enrichment of critical microorganisms and metabolic activities. The abundance of functional bacteria (i.e. Geobacter, Thauera and Dechloromonas) were evidently increased. Additionally, the energy metabolism and other functional genes encoding cytochrome c (ccoN), nitrite reductase (nirD) and phosphate transporter (pstA) were all stimulated.

Interrelation between macrophytes roots and cathode in constructed wetland-microbial fuel cells: Further evidence

As an essential component in constructed wetland-microbial fuel cells (CW-MFC) system, the macrophytes play multiple roles in bioelectricity generation and decontaminants performance. However, the interrelation between macrophytes roots and cathode has not been fully investigated despite the fact that plant cultivation strategy is a critical issue in practice. For the first time, this study was designed to explore the interaction between macrophytes and cathode in CW-MFC by planting Cyperus altrnlifolius at relatively different positions from the cathode. The results showed that plants exhibited higher bioelectricity generation and dramatically improved pollution removal, as well as the improved richness and diversity of cathode microbes. More significantly, the relative locations between the plant roots and the cathode could lead to different cathode working patterns, while the optimal cathode pattern "plant root-assisted bio- & air-cathode" was formed when the plant roots are directly placed on the air-cathode layer in CW-MFC. The insight into the plant root and cathode relationship lies in whether the "multi-function cathode" can be established. This study contributes to increase the knowledge regarding the presence and behavior of plant roots and cathode throughout a CW-MFC system.

Performance optimization and microbial community evaluation for domestic wastewater treatment in a constructed wetland-microbial fuel cell

Constructed wetland-microbial fuel cell system (CW-MFC), an attractive technology still under study, has shown to improve domestic wastewater treatment efficiency and generate bioelectricity. This work investigated the effect of multiple factors on the performance optimization for the pollutants removal and bioelectricity production compared to a traditional CW, including influent chemical oxygen demand (COD) concentration, hydraulic retention time (HRT) and external resistance. The results showed that the optimal operating conditions of COD concentration, HRT and external resistance for CW-MFC were 200 mg/L, 24 h and 1000 Ω, respectively. The average COD, NH₄⁺-N, NO₃^--N and TP removal efficiencies were 6.06%, 3.85%, 3.68% and 3.68% higher than these in CW system, respectively. Meanwhile, the maximum output voltage and power density of CW-MFC were 388 ± 12 mV and 107.54 mW/m³. In addition, the microbial community analysis indicated that the pollution removal and bioelectricity generation might benefit from the gradual enrichment of electroactive bacteria (Tolumonas) and denitrifying bacteria (Denitratisoma, Methylotenera and Sulfuritales). The findings can provide the optimum operation parameters and mechanism insight for the performance of CW-MFC systems.

Enhanced removal of heavy metals and metalloids by constructed wetlands: A review of approaches and mechanisms

Constructed wetlands (CWs) are increasingly employed to remediate heavy metal and metalloid (HMM)-polluted water. However, the disadvantages of HMM removal by conventional CWs (without enhancement), such as an unstable and unpredictable removal efficiency, hinder the reliability of this technology. The objective of this study was to review research on enhanced CWs for HMM removal. In particular, we performed a bibliometric analysis to evaluate research trends, critical literature, and keyword evolution in recent years. Subsequently, we reviewed various enhanced approaches for the application of CWs for the removal of HMMs, including the use of improved substrates, aquatic macrophytes, microorganisms, bioelectrochemical coupling systems, hybrid CW, external additives, and operation parameters. Furthermore, the main mechanisms underlying HMM removal by these approaches are summarized. Our review clearly reveals that research on the remediation of HMM-polluted water via CW technology is receiving increased attention, with no apparent trends in topics. The selection of appropriate enhanced approaches or operation parameters as well as methodological improvements should be based on the dominant environmental conditions of the CW column and removal mechanisms for the targeted HMMs. Based on the established literature, several suggestions are proposed to guide the optimization of the design and operation of efficient CWs for the treatment of HMM-polluted water.

Insight into the organic matter degradation enhancement in the bioelectrochemically-assisted sludge treatment wetland: Transformation of the organic matter and microbial community evolution

Sludge treatment wetland (STW) has been widely used to dewater and mineralize the various sludge, but the low degradation ability of organic matter can limit its application. Bioelectrochemistry has been proven to accelerate the degradation of organic compounds and recover bioenergy from the sludge. In this study, a bioelectrochemical-assisted sludge treatment wetland (BE-STW) system was constructed to determine the most common types of degraded organic matter and the functional bacterial community. It was found that the bioelectrochemistry process contributed to a further removal of the total chemical oxygen demand (TCOD) by 19% (±0.6) and the additional soluble chemical oxygen demand (SCOD) value was 64.10% (±0.63), with a voltage output of 0.961 V and a power density of 0.351 W/m³. The hydrophilic and hydrophobic acid fractions of the sludge were preferentially removed in BE-STW. The tryptophan-like protein and fulvic acid-like substances were totally removed, whereas, the hydrolysis of aromatic organic compounds in the neutral and hydrophobic acid fractions was enhanced. Also, the enrichment of Longilinea and Methylophilus improved the hydrolysis of organic matter. Moreover, the high relative abundance of Thauera, Dechloromonas, and Syntrophorhabdus could accelerate the degradation of aromatic compounds in the BE-STW system. The bacteria from the genus Geobacter was predominantly detected (2.48%) in the anodic biofilm on BE-STW. The results showed that bioelectrochemistry could improve the sludge stabilization degree in STW, accelerate the organic matter degradation and hydrolysis efficiency, and harvest bioelectricity, simultaneously. This technology can provide a new pathway to increase the efficiency of the traditional STW systems.

Insight into the performance discrepancy of GAC and CAC as air-cathode materials in constructed wetland-microbial fuel cell system

Constructed wetland-microbial fuel cell (CW-MFC) has exhibited the performance discrepancy between using granular activated carbon (GAC) and columnar activated carbon (CAC) as air-cathode materials. No doubt, this is linked with electrochemical performance and decontaminants characteristics in the CW-MFC system. To provide insight into this performance discrepancy, three CW-MFCs were designed with different carbon-material to construct varied shapes of air-cathodes. The results showed that the ring-shaped cathode filled with GAC yielded a highest voltage of 458 mV with maximum power density of 13.71 mW m^-2 and >90% COD removal in the CW-MFC system. The electrochemical characteristics and the electron transport system activity (ETSA) are the driven force to bring the GAC a better electron transportation and oxygen reduction reaction (ORR). This will help elucidating underlying mechanisms of different activated carbon for air-cathode and thus promote its large application.

A review on recent advancements in bioenergy production using microbial fuel cells

The generation of energy and its efficient use in industries and agriculture are critical to any country's growth. A country like India, which is still developing, faces a major challenge in terms of generating adequate electricity. With the current crisis and environmental concerns, the government must look past carbon-based energy sources and into long-term energy sources. Microbial fuel cells (MFCs) are a form of technology that can be used to both treat wastewater and generate electricity on a large scale. Researchers play a critical role in making this technology practical and effective enough to be implemented. However, since the charge of building microbial fuel cells is superior than the cost of fossil fuels, it is unlikely that power production will continually be aggressive with existing energy generation approaches. However, improvements in power densities and lower material expenses could render microbial fuel cells a viable option for energy making in the future. Following a thorough literature review, the analysis resumes the role of micro-organisms and substrates in the anode chamber. Microbial fuel cells are discussed in terms of their forms, materials, mechanism, and activity. This analysis discusses the various factors that influence microbial fuel cells, as well as contemporary challenges and applications in the development of sustainable electrical power.

Electrochemically mediated precipitation of phosphate minerals for phosphorus removal and recovery: Progress and perspective

Phosphorus (P) is an essential element for the growth and reproduction of organisms. Unfortunately, the natural P cycle has been broken by the overexploitation of P ores and the associated discharge of P into water bodies, which may trigger the eutrophication of water bodies in the short term and possible P shortage soon. Consequently, technologies emerged to recover P from wastewater to mitigate pollution and exploit secondary P resources. Electrochemically induced phosphate precipitation has the merit of achieving P recovery without dosing additional chemicals via creating a localized high pH environment near the cathode. We critically reviewed the development of electrochemically induced precipitation systems toward P removal and recovery over the past ten years. We summarized and discussed the effects of pH, current density, electrode configuration, and water matrix on the performance of electrochemical systems. Next to ortho P, we identified the potential and illustrated the mechanism of electrochemical P removal and recovery from non-ortho P compounds by combined anodic or anode-mediated oxidation and cathodic reduction (precipitation). Furthermore, we assessed the economic feasibility of electrochemical methods and concluded that they are more suitable for treating acidic P-rich waste streams. Despite promising potentials and significant progress in recent years, the application of electrochemical systems toward P recovery at a larger scale requires further research and development. Future work should focus on evaluating the system's performance under long-term operation, developing an automatic process for harvesting P deposits, and performing a detailed economic and life-cycle assessment.

Microbial activity enhancement in constructed wetlands operated as bioelectrochemical systems

Treatment wetlands (TW) operated as bioelectrochemical systems (BES-TW) provide a higher degree of treatment than conventional TW. Yet, the fundamental processes or mechanisms for the envisaged better performance of BES-TW over conventional TW remains poorly understood. This work aimed to determine to which extent microbial activity enhancement could be the reason behind this treatment performance increase. To this purpose, pilot-scale horizontal sub-surface flow BES-TW operated under three different configurations were continuously fed with real urban wastewater. BES-TW were evaluated for COD and ammonia removal efficiency, and two techniques of microbial activity assessment were applied. Configurations, tested in duplicate, were: control TWs without electrodes (C-TW), TWs operated as microbial fuel cells (MFC-TW), and TWs operated as microbial electrolysis cells (MEC-TW). Microbial activity was assessed by measuring the enzymatic activity (EA) (FDA hydrolysis technique) and the aerobic activity (AA) (estimated through respirometry). Results showed that BES-TW outperformed C-TW in terms of both microbial activity enhancement and contaminants removal efficiency, especially in the case of MEC-TW. More precisely, this configuration showed an average improvement of 17%, and 56% in COD removal and EA efficiencies, respectively, compared to C-TW. Regarding AA activity, although MEC-TW seemed to outperform the rest of the configurations, differences were not statistically significant. This work demonstrates that TWs operated as BES increase the overall enzymatic activity of the treatment bed and this, in turn, is the leading cause to a higher degree of treatment performance.

Recent advances in polymeric nanostructured ion selective membranes for biomedical applications

Nano structured ion-selective membranes (ISMs) are very attractive materials for a wide range of sensing and ion separation applications. The present review focuses on the design principles of various ISMs; nanostructured and ionophore/ion acceptor doped ISMs, and their use in biomedical engineering. Applications of ISMs in the biomedical field have been well-known for more than half a century in potentiometric analysis of biological fluids and pharmaceutical products. However, the emergence of nanotechnology and sophisticated sensing methods assisted in miniaturising ion-selective electrodes to needle-like sensors that can be designed in the form of implantable or wearable devices (smartwatch, tattoo, sweatband, fabric patch) for health monitoring. This article provides a critical review of recent advances in miniaturization, sensing and construction of new devices over last decade (2011-2021). The designing of tunable ISM with biomimetic artificial ion channels offered intensive opportunities and innovative clinical analysis applications, including precise biosensing, controlled drug delivery and early disease diagnosis. This paper will also address the future perspective on potential applications and challenges in the widespread use of ISM for clinical use. Finally, this review details some recommendations and future directions to improve the accuracy and robustness of ISMs for biomedical applications.

Influence of applied potential on treatment performance and clogging behaviour of hybrid constructed wetland-microbial electrochemical technologies

A two-stage hybrid Constructed Wetland (CW) integrated with a microbial fuel cell (MFC), and microbial electrolysis cell (MEC) has been assessed for treatment performance and clogging assessment and further compared with CW. The CW-MEC was operated with applied potential to the working electrode and compared with the performance of naturally adapted redox potential of the CW-MFC system. A complex synthetic municipal wastewater was used during the study, which was composed of trace metals, organics, inorganics, and dye. The study demonstrated that providing a constant potential to the working electrode in CW-MEC has resulted in high treatment performance and reduced sludge generation. The maximum chemical oxygen demand (COD), ammonium (NH₄⁺), and phosphate (PO₄^3-) removal achieved during treatment by CW-MEC at 24 h hydraulic retention time was 89 ± 6%, 72 ± 6% and 93 ± 2%, respectively. ICP-MS results indicated that trace metal removals were also higher in CW-MEC than in CW alone (p < 0.05). At the end of the experiment, significant volumetric change (total volume of the microcosm) occurred in CW (1.3 L), which indicates high sludge generation, whereas it was lesser in CW-MEC (0.3 L) and in CW-MFC (0.5 L). Further, Energy Dispersive X-ray (EDX) spectroscopy results indicated low levels of metal precipitation in the CW-MEC system. Based on the Shannon diversity index, the CW-MEC was assessed to be characterised by high species richness and diversity. The observations from this study indicate that the applied potential at the working electrode has a significant impact on treatment performance and clogging behaviour of the system.

Improving the outcomes from electroactive constructed wetlands by mixing wastewaters from different beverage-processing industries

Denitrification in electroactive constructed wetland (EW) systems is constrained by the carbon source and the carbon/nitrogen (C/N) ratio (the COD/TN ratio). In this study, wastewater with a high C/N from a brewery was added to wastewater with a low C/N (dairy wastewater) in an EW system, and the pollutant removal, bioelectricity generation, transformations of dissolved organic matter, and microbial community structures were evaluated. The results showed that the average removal rates of ammonium nitrogen, total nitrogen, and chemical oxygen demand from the wastewater mixture were 6.40%, 46.44%, and 23.85% higher than those from the wastewater with a low C/N, respectively. Dissimilatory nitrate reduction to ammonium was effectively inhibited, and the NH₄⁺-N removal was 25.52% higher, when the wastewater mixture was used instead of the high C/N wastewater. Similarly, the output voltage was significantly increased, and the internal resistance of the device was reduced, for the wastewater mixture. The structure of the microbial community improved, the relative abundance of electrochemically active bacteria was higher, and the protein-like and humic-like components were lower, in the mixture treatment than in the individual treatment. The results show that the nitrogen removal and biopower generation improved in an EW system when high C/N wastewater was used as the carbon source.

Interrelation between sulphur and conductive materials and its impact on ammonium and organic pollutants removal in electroactive wetlands

This investigation is the first of its kind to evaluate the interrelation of sulphate (SO₄^2-) with conductive materials as well as their individual and synergetic effects on the removal of ammonium and organic pollutants in electroactive wetlands, also known as constructed wetland (CW) - microbial fuel cell (MFC). The role of MFC components in CW was investigated to treat the sulphate containing wastewater under a long-term operation without any toxicity build-up in the system. A comparative study was also performed between CW-MFC and CW, where sulphate containing wastewater (S-replete) and without sulphate wastewater (S-deplete) was assessed. The S-replete showed high NH₄⁺ removal than the S-deplete, and the requesnce of removal was: CW-MFC-replete>CW-MFC-deplete>CW-replete>CW-deplete. The chemical oxygen demand (COD) removal was high in the case of CW-MFC-replete, and the sequence of removal was CW-MFC-replete>CW-MFC-deplete>CW-deplete>CW-replete. X-ray photon spectroscopic study indicates 0.84% sulphur accumulation in CW-MFC-replete and 2.49% in CW-replete, indicating high sulphur precipitation in CW without the MFC component. The high relative abundance of class Deltaproteobacteria (7.3%) in CW-MFC-replete along with increased microbial diversity (Shannon index=3.5) rationalise the symbiosis of sulphate reducing/oxidising microbes and its impact on the treatment performance and electrochemical activity.

The Role of Wetland Plants on Wastewater Treatment and Electricity Generation in Constructed Wetland Coupled with Microbial Fuel Cell

CWMFC is a novel technology that has been used for almost a decade for concurrent wastewater treatment and electricity generation in varying scopes of domestic, municipal, and industrial applications since its implementation in 2012. Its advantage of low-cost enhanced wastewater treatment and sustainable bioelectricity generation has gained considerable attention. Nevertheless, the overall efficiency of this novel technology is inclined by several operating factors and configuration strands, such as pH, sewage composition, organic loading, electrode material, filter media, electrogens, hydraulic retention time, and macrophytes. Here, we investigate the effect of the wetland plant component on the overall performance of CWMFCs. The macrophyte’s involvement in the oxygen input, nutrient uptake, and direct degradation of pollutants for the required treatment effect and bioelectricity production are discussed in more detail. The review identifies and compares planted and unplanted CWMFC with their efficiency on COD removal and electricity generation based on previous and recent studies.

Simultaneous enhancement of treatment performance and energy recovery using pyrite as anodic filling material in constructed wetland coupled with microbial fuel cells

Constructed wetland coupled with microbial fuel cells (CW-MFCs) are a promising technology for sustainable wastewater treatment. However, the performance of CW-MFCs has long been constrained by the limited size of its anode. In this study, we developed an alternative CW-MFC configuration that uses inexpensive natural conductive pyrite as an anodic filling material (PyAno) to extend the electroactive scope of the anode. As a result, the PyAno configuration significantly facilitated the removal of chemical oxygen demand, ammonium nitrogen, total nitrogen, and total phosphorus. Meanwhile, the PyAno increased the maximum power density by 52.7% as compared to that of the quartz sand control. Further, a typical exoelectrogen Geobacter was found enriched in the anodic zone of PyAno, indicating that the electroactive scope was extended by conductive pyrite. In addition, a substantial electron donating potential was observed for the anodic filling material of PyAno, which explained the higher electricity output. Meanwhile, a higher dissimilatory iron reducing potential was observed for the anodic sediment of PyAno, demonstrating the integrity of an iron redox cycling in the system and its promotive effect for the wastewater treatment. Together, these results implied that the PyAno CW-MFCs can be a competitive technology to enhance wastewater treatment and energy recovery simultaneously.

Review of Fiber Optical Sensors and Its Importance in Sewer Corrosion Factor Analysis

Adverse effects of wastewater on the hygiene of human and circumstances is a major issue in society. Appropriate refining systems with high efficiency is required to treat the wastewater. Sewage treatment plant plays a major and important role in conserving incredible nature of the environment. Microbiologically Induced Corrosion (MIC) is an important phenomenon in sewage structures which causes the deterioration of infrastructures. Huge capital has been spent and efforts have been made on wastewater treatment infrastructure to increase operating efficiency and reliability of compliance. The investments in reimbursement and maintenance of sewer structures upsurge with an increase in the rate of MIC. The focus of this review is to describe MIC in sewer structure and the factors influencing the corrosion such as the generation of Sulfuric acid (H2SO4), Relative Humidity (RH), pH of the concrete structure and temperature. Modern developments in the design of Fiber Optical Sensors (FOSs) for observing the parameters including pH, Hydrogen Sulfide (H2S), RH and temperature will be discussed.

Mapping the field of constructed wetland-microbial fuel cell: A review and bibliometric analysis

The embedding microbial fuel cell (MFC) into constructed wetlands (CW) to form CW-MFC bears the potential to obtain bioelectricity and a clean environment. In this study, a bibliometric analysis using VOSviewer based on Web of Science data was conducted to provide an overview by tracing the development footprint of this technology. The countries, institutions, authors, key terms, and keywords were tracked and corresponding mapping was generated. From 2012 to September 2020, 442 authors from 129 organizations in 26 countries published 135 publications in 42 journals with total citation of 3139 times were found. The key terms analysis showed four clusters: bioelectricity generation performance, mechanism study, refractory pollutants removal, and enhanced conventional contaminants removal. Further research themes include exploring the biochemical properties of electrochemically active bacteria, emerging contaminants removal, effective bioelectricity harvest and the use, and biosensor development as well as scaling-up for real field application. The bibliometric results provide valuable references and information on potential research directions for future studies.

An algal assisted constructed wetland-microbial fuel cell integrated with sand filter for efficient wastewater treatment and electricity production

In this study we report on a three-stage design of algal assisted constructed wetland -microbial fuel cell incorporated sand filter for efficient treatment of wastewater and bioelectricity generation, simulating a core of it. It aims for the complete removal of organic matter and other inorganic pollutants such as NO₃^-, NH₄⁺ and PO₄^3-. The conductive material equipped anode region of constructed wetland (CW) performed better for organic removal, and the system efficiently removed COD up to 96.37 ± 2.6%. The algal biomass passively aerated the cathode region and resulted in efficient removal of 85.14 ± 10.73% of NH₄⁺ and 69.03 ± 10.14% of PO₄^3-. The additional sand filter provided anaerobic situation favorable for removal of NO₃^- up to 68.41 ± 7.63%. The maximum power and current densities achieved in the system were 33.14 mW m^-3 and 235.0 mA m^-3, respectively.