Plastic in agricultural soils - A global risk for groundwater systems and drinking water supplies? - A review

Vertical Distribution and Multi-Source Pathways of Microplastics in Agricultural Soils: A Study of Typical Irrigation Areas in the Upper Yellow River Basin

Agricultural production inputs, irrigation water and atmospheric deposition are the primary sources of microplastics (MPs) in farmland soils. Irrigation exacerbates the vertical migration of MPs from surface soils to deeper aquifer, posing significant ecological and healthy risks to groundwater. However, most studies focused upon surface soils, with limited effort on the spatial distribution and influencing factors of MPs. This study compared forest and grassland soils in the upper Yellow River region, analyzed the vertical distribution of MPs across six soil layers (0-100 cm) under border and drip irrigation patterns. Additionally, the specific composition of MPs in atmospheric source in 1-year settling period, irrigation water, fertilizers, and seed coatings was investigated. The results showed that MPs were detected in all 0-100 cm soil layers, with significantly higher abundance in farmland soils (5,688.8 ± 609.38 items/kg) than in forest (2,387.05 ± 152.47 items/kg) and grassland (669.64 ± 131.83 items/kg) soils. The MPs abundance in farmland increased with prolonged plastic film mulching. Overall, MPs abundance decreased with soil depth, but accumulation occurred at 20-30 cm due to tillage and irrigation. The MPs abundance in the border-irrigated farmland (5,688.79 ± 1,497.11 items/kg) was twice that in the drip-irrigated farmland (2,744.44 ± 996.93 items/kg), indicating that border irrigation intensifies surface soil contamination and accelerates MPs migration to the deeper layers. The primary MPs components in farmland soils were PVC, PU, CPE, ACR, PE, EVA, FKM, PET and PTFE. PVC and PU mainly originated from fertilizers, seed coatings, irrigation water, and atmospheric deposition, while CPE, PI, PLA, and PSF were likely derived from the irrigation water and atmospheric deposition. In conclusion, the soil MPs mainly originated from atmospheric source, irrigation water and agricultural inputs. The MPs distribution was influenced by tillage intensity and irrigation practices. These findings provided a better understanding of the MPs distribution patterns and influencing factors, thereby aiding in development of effective pollution control strategies.

Explorations in the dark continent: Did microplastics and microfibres get here before us?

Microplastic and microfibre pollution is a global concern, however, karst areas remain understudied. Because of their properties, these anthropogenic microparticles are particularly hazardous, and easily transportable, reaching also remote areas. The underground world, called also dark continent, is a treasure of information, and remained the last frontier of terrestrial exploration: many parts of the underground world have not yet been accessed. In the hypogeal environments, pollution is closely linked to the connections between surface and subterranean habitats, the hydrodynamics of the aquifer, geology, and local environmental conditions. This study aims to investigate, for the first time, the presence of microplastics and microfibres in unexplored caves, revealing how human activity could indirectly impact even the uncontaminated environments of the dark continent. Together with speleologists, we collected and investigated sediment samples from unexplored caves of the Abruzzo Region, Italy. Examined anthropogenic microparticles were counted and characterized by composition, size, shape, fluorescence, and colour, via microscopy and spectroscopy. Microplastic concentrations resulted low or absent, moreover, natural and regenerated microfibres ones were higher. Fibre-shape was the most common. Most of the microparticles were clear and fluorescent under UV light. Pollution sources in this area likely include atmospheric deposition, nearby human activities, roads, and garbage. These results highlight anthropogenic microparticle pollution exists in unexplored karst caves, which could impact subterranean habitats, species, and water resources. Given the link between surface and underground karst environments, more monitoring and protection are needed. This work encourages speleologists to collect samples during explorations too, as these rarely studied environments offer crucial insights into karst systems, potential threats, and conservation needs. Future long-term studies will clarify pollutant sources, transport, and effects on ecosystems.

Co-occurrence of multiple contaminants: Unentangling adsorption behaviour in agricultural soils

The co-occurrence of pesticides, pharmaceuticals, and MPs has resulted in combined toxicity and high risks to ecosystems and human health. However, understanding on the interactions among co-occurring pollutants in soils remains limited. This study focused on adsorption behaviour of a pesticide mixture (chlorpyrifos (CPF), pendimethalin (PDM) and pyraclostrobin (PCS)) in three soils (sandy soil (S1), loamy soil (S2), and silt soil (S3)) to examine the absorption behaviour of pesticides in the presence of the pharmaceutical compound albendazole (ALB) and starch-based microplastics (MPs). The results showed that ALB significantly decreased (p < 0.05) the adsorption of CPF, PDM, and PCS by 29 %-41 % in S1. The adsorption of CPF (+20 %) and PCS (+101 %) in S2 were significantly enhanced but PDM (-22 %) adsorption was inhibited by ALB. ALB also significantly (p < 0.05) promoted CPF and PCS adsorption in S3 by 39 % and 120 %, respectively, but did not change PDM adsorption. In soil-MP matrices, ALB significantly reduced the adsorption of CPF (-25 %), PDM (-26 %), and PCS (-21 %) in the S1-MP matrix, but no significant change in the S2 and S3-MP matrices was observed. Moreover, MPs significantly (p < 0.05) increased the adsorption of the pesticide mixture by 120-730 %, but reduced ALB adsorption by 11-24 % in soils. Further, regardless of ALB presence, correlation analysis suggested that Kd of pesticides showed positive correlations (p < 0.01) to soil organic matter, specific surface area, and clay content in soil matrices without MP-contamination, while no significant positive correlation between Kd of pesticides and soil properties was observed in soil-MPs matrices. This study indicates that co-occurring pollutants could alter the adsorption behaviour of pesticides in soil and thereby affect their bioavailability and mobility in the soil ecosystem. Further study is urgently needed to assess the ecotoxicity of co-occurring multi-contaminants, as well as their potential transport to other environmental compartments.

Microplastic exposure reduces seed germination in a coastal plant

Plastic contamination presents major environmental threats through its degradation into micro-sized particles that are harmful to a variety of organisms, including plants. Among terrestrial habitats, coastal dunes are likely some of the most plastic-polluted, but very few studies thus far have examined microplastic effects on wild plants native to this habitat. Moreover, current research on microplastics has limited environmental relevancy due to the common use of homogenously shaped un-weathered microplastics in exceeding concentrations. Our research examined the effects of microplastics from biodegradable and non-biodegradable origin, in their pristine (raw) and weathered form, at a concentration of 106 particles per ml, on the native coastal plant Cutandia maritima. We first synthesized engineered microplastics of high environmental relevancy from bulk plastic products. Then, we exposed C. maritima plants to the microplastics in the soil. While no effect was found on the plants following chronic exposure to all microplastic types, weathered plastic reduced seed germination after exposure of the mother plants, suggesting epigenetic modifications might have an effect at the embryo stage. In contrast, direct exposure of microplastics, specifically polylactic acid, facilitated seeds germination. Our results highlight the importance of studying the effects of microplastic on seed germination and raise the ongoing ecological consequences of environmental microplastic coastal contamination, which should be taken into account in regulatory and environmental assessments.

Microplastic pollution of thermal waters in Kütahya, Turkey

Microplastics (MPs) are emerging pollutants in aquatic systems, but their presence in groundwater, particularly thermal waters, is understudied. This study investigates the prevalence and characteristics of MPs in the thermal waters of Kütahya, Turkey, marking the first such exploration in the country and globally in thermal groundwater systems. Twenty-one samples (3 L each) were collected across nine regions and filtered using GF/C filters (0.45-µm pore size). Microscopic examination and μ-Raman spectroscopy revealed an average MP concentration of 0.85 ± 0.71 MPs/L (850 MPs/m3), with the highest at ST-8 (4.88 ± 2.98 MPs/L). Fibers (50%), fragments (39.8%), and films (10.2%) were identified, with polyethylene (22.2%) being the most common polymer type. Variability in MP abundance across stations suggests multiple contamination sources, including agricultural runoff, anthropogenic activities, and material used in water transport infrastructure. The findings indicate low-level MP contamination in thermal groundwater systems, which could influence both ecological health and human activities relying on these waters, such as thermal tourism and greenhouse irrigation. This pioneering study highlights the necessity for integrated waste management policies to mitigate MP pollution and underscores the role of thermal waters in understanding the transport dynamics of MPs in groundwater systems.

Development of Short Jute Fiber-Reinforced Thermoplastic Pre-Preg Tapes

Jute fibers are renewable, light, and strong, allowing them to be considered as attractive materials in composite manufacturing. In the present work, a simple and effective method for preparing continuous pre-preg tapes from short jute fiber bundles (without twist) is developed and its application in winding forming is evaluated. Linear low-density polyethylene film (LLDPE) with good flexibility and weather resistance was used as the thermoplastic matrix; jute fiber bundles were first spread parallel to each other on an LLDPE film and then rolled up to form a pre-roll. The pre-roll enclosing fiber bundles was hot-pressed in a designed mold to form a pre-preg tape, where the fiber bundles were more parallel to the tape than the fibers in twine. Although the untwisted structure exhibited a lower tensile strength for the fiber bundle, it could be processed into a continuous pre-preg with higher tensile strength than the jute twine-impregnated pre-preg. This is based on the good impregnation of the short fiber bundle and its unidirectional, uniform strengthening in the continuous pre-preg. The tensile strength and modulus of the fiber bundle-reinforced pre-preg increased by 16.70% and 257.14%, respectively, compared with jute twine-reinforced pre-preg (within the fiber proportion of 40.wt%). When applied to winding, the fiber bundle-reinforced pre-preg showed advantages of interlayer fusion, surface flatness, and ring stiffness. In contrast, the twisted continuous structure did not retain its advantage in pre-preg. The development of pre-preg tapes by discontinuous fibers might be a good way for utilizing natural fibers in the field of green engineering due to its diverse secondary processing.

Toxicity of Polystyrene Microplastics with Cadmium on the Digestive System of Rana zhenhaiensis Tadpoles

Microplastics pollution in freshwater systems is attracting increasing attention. However, our knowledge of its combined toxicity with heavy metals is scarce. In this study, Rana zhenhaiensis was used as the model animal to study the combined poisoning mechanism of cadmium or microplastics on the digestive systems of tadpoles in freshwater. Results showed that the exposure to cadmium and polystyrene increased the mortality and metamorphosis rate of R. zhenhaiensis tadpoles, and delayed their growth and development. Cadmium was detected in the livers and intestines, while polystyrene mainly accumulated in the gills and intestines of tadpoles. The individual exposure of cadmium or polystyrene can cause pathological damage to liver tissue, induce oxidative stress in liver, and change gene expression. Cadmium co-exposure with polystyrene can reduce the cadmium accumulation in the liver. While polystyrene can slightly increase cadmium accumulation in the intestine. Exposure to cadmium and polystyrene altered the abundance and community structure of intestinal microbiota, and polystyrene increased the dysregulation of the gut microbiome. In this study, the combined exposure of microplastics and cadmium had a negative impact on R. zhenhaiensis tadpoles, but the introduction of microplastics on the toxicity of cadmium on the tadpoles needs further investigation, due to the different characteristics of microplastics.

Effect of microplastic on sorption, toxicity, and mineralization of 2,4-dichlorophenoxyacetic acid ionic liquids

Recently, there has been significant focus on microplastics in the environment, especially regarding their role in sorption-desorption processes of emerging contaminants, impacting pollutant migration between aquatic and terrestrial ecosystems. Notably, the newest pollutants in such environments are the herbicide formulations known as ionic liquids (ILs), which integrate the structure of classic herbicidal anion with surface-active cations acting as an adjuvant. In our study, we synthesized herbicidal ILs by combining 2,4-D anion with cetyltrimethylammonium [CTA] and didecyldimethylammonium [DDA] cations. We investigated whether ILs and the mixture of salts, when exposed to polyethylene (PE) microplastics, differ in properties. We analyzed their sorption on defined PE particles, evaluated toxicity on Pseudomonas putida KT2440 using trans/cis ratio of unsaturated fatty acids, and assessed biodegradability with OECD 301F standard test. Results indicate IL cations and anions behave as distinct entities, questioning IL synthesis feasibility. Hydrophobic adjuvants were found to adsorb onto PE microplastic surfaces (5-60% [CTA] > [DDA]), posing potential threats of surface-active xenobiotic accumulation. This highlights the need to explore microplastics' role as sorbents of hazardous adjuvants in agriculture, potentially competing with humic acids and affecting xenobiotic bioavailability. Consequently, xenobiotics may persist longer in the environment, facilitated by microplastic mobility between aquatic and terrestrial ecosystems. KEY POINTS: • Microplastics act as sorbents, accumulating xenobiotics and limiting biodegradation. • Sorption of surfactant cations on microplastics reduces soil bacteria toxicity. • Research confirms independent action of ions from ionic liquids in the environment.

Microplastics in the soil-water-food nexus: Inclusive insight into global research findings

Nuisance imposed by biotic and abiotic stressors on diverse agroecosystems remains an area of focus for the scientific fraternity. However, emerging contaminants such as microplastics (MP) have imposed additional dimension (alone or in combinations with other stressors) in agroecosystems and keep escalating the challenges to achieve sustainability. MP are recognized as persistent anthropogenic contaminants, fetch global attention due to their unique chemical features that keeps themselves unresponsive to the decaying process. This review has been theorized to assess the current research trends (along with possible gap areas), widespread use of MP, enhancement of the harshness of heavy metals (HMs), complex interactions with physico-chemical constituents of arable soil, accumulation in the edible parts of field crops, dairy products, and other sources to penetrate the food web. So far, the available review articles are oriented to a certain aspect of MP and lack a totality when considered from in soil-water-food perspective. In short, a comprehensive perspective of the adverse effects of MP on human health has been assessed. Moreover, an agro-techno-socio-health prospective-oriented critical assessment of policies and remedial measures linked with MP has provided an extra edge over other similar articles in influential future courses of research.

Synergistic effects between microplastics and glyphosate on honey bee larvae

Microplastic (MPs) pollution has emerged as a global ecological concern, however, the impact of MPs exposure, particularly in conjunction with other pollutants such as glyphosate (GLY) on honey bee remains unknown. This study investigated the effects of exposure to different concentrations of MPs and their combination with GLY on honey bee larvae development, or during the larvae period, regulation of major detoxification, antioxidant and immune genes, and oxidative stress biomarkers. Results revealed that combined exposure to MPs and GLY decreased larvae survivorship and weight, while exposure to MPs alone showed no significant differences. Both MPs and GLY alone downregulated the defensin-1 gene, but only combined exposure with GLY downregulated the hymenoptaecin gene and increased catalase enzyme activity. The data suggest a synergistic effect of MPs and GLY, leading to immunosuppression and reduced larvae survival and weight. These findings highlight potential risks of two prevalent environmental pollutants on honey bee health.

Identification of Pristine and Protein Corona Coated Micro- and Nanoplastic Particles with a Colorimetric Sensor Array

A colorimetric sensor array has been developed to differentiate various micro- and nanoplastic particles (MNPs), both pristine and those coated with a protein corona, in buffered water. This array utilizes five distinct cross-reactive chemo-responsive dyes, which exhibit changes in visible optical absorbance upon interaction with MNPs. Although no single dye responds exclusively to either pristine or protein-corona-coated MNPs, the collective shifts in color across all dyes create a unique molecular fingerprint for each type of MNP. This method demonstrates high sensitivity, capable of detecting MNPs of various sizes (50 nm, 100 nm, and 2 μm) and differentiating them from controls at concentrations as low as 10 ng/mL using standard chemometric techniques, ensuring accurate results without error. Additionally, the method can effectively distinguish between pristine and protein-corona-coated polystyrene MNPs. This colorimetric approach offers a rapid, cost-effective, and accurate method for monitoring MNP pollution and assessing their prior interactions with biological systems.

Full-chain analysis on emerging contaminants in soil: Source, migration and remediation

Emerging contaminants (ECs) are gaining attention due to their prevalence and potential negative impacts on the environment and human health. This paper provides a comprehensive review of the status and trends of soil pollution caused by ECs, focusing on their sources, migration pathways, and environmental implications. Significant ECs, including plastics, synthetic polymers, pharmaceuticals, personal care products, plasticizers, and flame retardants, are identified due to their widespread use and toxicity. Their presence in soil is attributed to agricultural activities, urban waste, and wastewater irrigation. The review explores both horizontal and vertical migration pathways, with factors such as soil type, organic matter content, and moisture levels influencing their distribution. Understanding the behavior of ECs in soil is critical to mitigating their long-term risks and developing effective soil remediation strategies. The paper also examines the advantages and disadvantages of in situ and ex situ treatment approaches for ECs, highlighting optimal physical, chemical, and biological treatment conditions. These findings provide a fundamental basis for addressing the challenges and governance of soil pollution induced by ECs.

Traversing the prevalence of microplastics in soil-agro ecosystems: Origin, occurrence, and pollutants synergies

The ubiquity of plastics in modern life has made them a significant environmental concern and a marker of the Anthropocene era. The degradation of plastics results in the formation of microplastics (MPs), which measure 5 mm or less. The coexistence of MPs with other pollutants found in sludge, water treatment plant effluents, surface water, and groundwater, shapes the environmental landscape together. Despite extensive investigation, the long-term implications of MPs in soils remain uncertain, underscoring the importance of delving into their transportation and interactions with soil biota and other contaminants. The present article provides a comprehensive overview of MPs contamination in soil, encompassing its sources, prevalence, features, and interactions with soil flora and fauna, heavy metals, and organic compounds. The sources of MPs in soil agroecosystems are mulching, composting, littering, sewage sludge, irrigation water, and fertilizer application. The concentration of MPs reported in plastic mulch, littering, and sewage sludge is 503 ± 2760 items per kg-1, 4483 ± 2315 MPs/kg, and 11,100 ± 570 per/kg. The transport of MPs in soil agroecosystems is due to their horizontal and vertical migration including biotic and abiotic mobility. The article also highlighted the analytical process, which includes sampling planning, collection, purification, extraction, and identification techniques of MPs in soil agroecosystems. The mechanism in the interaction of MPs and organic pollutants includes surface adsorption or adhesion cation bridging, hydrogen bonding, charge transfer, ligand exchange, van der Waals interactions, and ion exchange.

The problem of anthropogenic microfibres in karst systems: Assessment of water and submerged sediments

A new worrying micropollutant threathens natural environments: the microfibres (MFs). Natural, regenerated and synthetic MFs have been detected in different environments, as well as in organisms. While synthetic MFs are generally detected in microplastic analyses, natural and regenerated MFs are not taken into account, or are wrongly considered plastics. They are generally considered biodegradable even if their degradation processes in ecosystems are poorly known. Their potential faster degradation could release toxic compounds, and their characteristics could led to a long-term accumulation in the environment. Understanding their dangerousness and the possible impact they could have on ecosystems is fundamental for environment conservation. We collected and investigated water and submerged sediment samples in different caves and springs of the Classical Karst Region (NE Italy), rich in protected habitats and species. MFs were analysed via microscopy and spectroscopy. MFs were found in all samples, highlighting pollution in surface and subterranean habitats of the karst system. MF concentration was higher in submerged sediments respect to waters, highlighting an accumulation of MFs over time. Big microfibres were less abundant, and MF amount increased with the decrease in the considered size. More than 80% of fibres were fluorescent under UV light. Fluorescent MFs were especially transparent, while non-fluorescent ones were mainly black and blue. Most MFs were cellulosic, and synthetic MFs represent only 15-22%, highlighting a significant gap between the MF composition detected in natural environments and the global production of synthetic textiles in recent times. Synthetic MFs were more abundant in waters. Our results improve the knowledge on micropollutants in karst environments, laying the foundations for future research. MF pollution monitoring in karst areas must become a priority for species protection, habitat conservation, and waters management, improving analyses on a larger number of aquatic environments, taking into account the ecological connections between surface and subterranean habitats.

Groundwater systems under siege: The silent invasion of microplastics and cock-tails worldwide

Microplastics (MPs) contamination is one of the significant escalating environmental concerns worldwide, and this stems from the increasing production and unlawful disposal of plastic materials. Regretfully, the synthesis of plastic materials is expected to triple in the upcoming years. Nevertheless, MPs pollution in marine, aquatic, and terrestrial settings has received much attention, unlike in groundwater systems. This study exhaustively reviewed varying degrees of recent publications in various search engines and provided a detailed state of current knowledge and research progress vis-à-vis MPs and cock-tail pollution in groundwater systems. Evidently, groundwater sources are severely contaminated as a result of growing anthropogenic activities and vertical movement of MPs and cock-tails from the atmospheric, terrestrial, and aquatic environments, however, fewer researchers have fixated their attention on estimating the occurrence of MPs in groundwater resources, while sufficient information regarding their sources, sampling methods, abundance, transport pathways, fate, modeling techniques, appropriate and adequate data, sorption properties, separation from other environmental media, toxicity, and remedial measures are extensively lacking. In addition, MPs may combine with other toxic emerging contaminants to improve migration and toxicity; however, no research has been conducted to fully understand cock-tail migration mechanisms and impacts in groundwater systems. Over time, groundwater may be regarded as the primary sink for MPs, if effective actions are neglected. Overall, this study detected a lack of concern and innumerable voids in this field; hence, vital and nascent research gaps were identified for immediate, advanced, and interdisciplinary research investigations.

Global area boom for greenhouse cultivation revealed by satellite mapping

Greenhouse cultivation has been expanding rapidly in recent years, yet little knowledge exists on its global extent and expansion. Using commercial and freely available satellite data combined with artificial intelligence techniques, we present a global assessment of greenhouse cultivation coverage and map 1.3 million hectares of greenhouse infrastructures in 2019, a much larger extent than previously estimated. Our analysis includes both large (61%) and small-scale (39%) greenhouse infrastructures. Examining the temporal development of the 65 largest clusters (>1,500 ha), we show a recent upsurge in greenhouse cultivation in the Global South since the 2000s, including a dramatic increase in China, accounting for 60% of the global coverage. We emphasize the potential of greenhouse infrastructures to enhance food security but raise awareness of the uncertain environmental and social implications that may arise from this expansion. We further highlight the gap in spatio-temporal datasets for supporting future research agendas on this critical topic.

Microplastics/nanoplastics in porous media: Key factors controlling their transport and retention behaviors

Till now, microplastics/nano-plastics(M/NPs) have received a lot of attention as emerging contaminant. As a typical but complex porous medium, soil is not only a large reservoir of M/NPs but also a gateway for M/NPs to enter groundwater. Therefore, the review of the factors controlling the transport behavior of M/NPs in porous media can provide important guidance for the risk assessment of M/NPs in soil and groundwater. In this study, the key factors controlling the transport behavior of M/NPs in porous media are systematically divided into three groups: (1) nature of M/NPs affecting M/NPs transport in porous media, (2) nature of flow affecting M/NPs transport in porous media, (3) nature of porous media affecting M/NPs transport. In each group, the specific control factors for M/NPs transport in porous media are discussed in detail. In addition to the above factors, some substances (colloids or pollutants) present in natural porous media (such as soil or sediments) will co-transport with M/NPs and affect its mobility. According to the different properties of co-transported substances, the mechanism of promoting or inhibiting the migration behavior of M/NPs in porous media was discussed. Finally, the limitations and future research directions of M/NPs transport in porous media are pointed out. This review can provide a useful reference for predicting the transport of M/NPs in natural porous media.

Microplastics derived from plastic mulch films and their carrier function effect on the environmental risk of pesticides

Plastic film mulching can maintain soil water and heat conditions, promote plant growth and thus generate considerable economic benefits in agriculture. However, as they age, these plastics degrade and form microplastics (MPs). Additionally, pesticides are widely utilized to control organisms that harm plants, and they can ultimately enter and remain in the environment after use. Pesticides can also be sorbed by MPs, and the sorption kinetics and isotherms explain the three stages of pesticide sorption: rapid sorption, slow sorption and sorption equilibrium. In this process, hydrophobic and partition interactions, electrostatic interactions and valence bond interactions are the main sorption mechanisms. Additionally, small MPs, biodegradable MPs and aged conventional MPs often exhibit stronger pesticide sorption capacity. As environmental conditions change, especially in simulated biological media, pesticides can desorb from MPs. The utilization of pesticides by environmental microorganisms is the main factor controlling the degradation rate of pesticides in the presence of MPs. Pesticide sorption by MPs and size effects of MPs on pesticides are related to the internal exposure level of biological pesticides and changes in pesticide toxicity in the presence of MPs. Most studies have suggested that MPs exacerbate the toxicological effects of pesticides on sentinel species. Hence, the environmental risks of pesticides are altered by MPs and the carrier function of MPs. Based on this, research on the affinity between MPs and various pesticides should be systematically conducted. During agricultural production, pesticides should be cautiously selected and used plastic film to ensure human health and ecological security.

Plastics in the environment in the context of UV radiation, climate change and the Montreal Protocol: UNEP Environmental Effects Assessment Panel, Update 2023

This Assessment Update by the Environmental Effects Assessment Panel (EEAP) of the United Nations Environment Programme (UNEP) considers the interactive effects of solar UV radiation, global warming, and other weathering factors on plastics. The Assessment illustrates the significance of solar UV radiation in decreasing the durability of plastic materials, degradation of plastic debris, formation of micro- and nanoplastic particles and accompanying leaching of potential toxic compounds. Micro- and nanoplastics have been found in all ecosystems, the atmosphere, and in humans. While the potential biological risks are not yet well-established, the widespread and increasing occurrence of plastic pollution is reason for continuing research and monitoring. Plastic debris persists after its intended life in soils, water bodies and the atmosphere as well as in living organisms. To counteract accumulation of plastics in the environment, the lifetime of novel plastics or plastic alternatives should better match the functional life of products, with eventual breakdown releasing harmless substances to the environment.

Microplastic pollution calls for urgent investigations in stygobiont habitats: A case study from Classical karst

Microplastic pollution in karst systems is still poorly studied, despite the presence of protected species and habitats, and important water reserves. Vulnerable key species hosted in these habitats could consume or assimilate microplastics, which can irreversibly damage management efforts, and thus ecosystems functionality. This can be particularly true for subterranean water habitats where microplastic pollution effects on wildlife management programs are not considered. The aim of this study is to provide a case study from the Classical Karst Region, which hosts peculiar habitats and key species protected at European level, such as the olm Proteus anguinus. As this area has been deeply exploited and modified over time, and is adjacent to highways, roads and railways, which could contribute to pollution within the karst system, threatening the ecosystems, it provides a perfect model system. In this study we collected and investigated water and sediment samples from aquatic environments of surface and subterranean habitats hosting several subterranean environment-adapted organisms. Examined particles were counted and characterized by size, color and shape via visual identification under a microscope, with and without UV light. Furthermore, spectroscopic analyses were carried out in order to identify microplastics typology. Microplastics were found in all examined habitats. In water, microplastics concentration ranged from 37 to 86 items/L, in sediments from 776 to 2064 items/kg. Fibre-shape was the main present, followed by fragments and beads, suggesting multiple sources of pollution, especially textile products. Most of the particles were fluorescent under UV light and were mainly transparent, while not-fluorescent ones were especially black, blue or brown. Samples contained especially polyesters and copolymers. These results highlight intense MP pollution in karst areas, with significant impacts on water quality, and potential effects on subterranean environment-dwelling species. We stress the importance of monitoring pollution in these critical environments for biodiversity and habitat conservation: monitoring in karst areas must become a priority for habitat and species protection, and water resources management, improving analyses on a larger number of aquatic surface and subterranean habitats.

Selective enrichment of virulence factor genes in the plastisphere under antibiotic and heavy metal pressures

The growing accumulation of plastic waste in the environment has created novel habitats known as the "plastisphere", where microorganisms can thrive. Concerns are rising about the potential for pathogenic microorganisms to proliferate in the plastisphere, posing risks to human health. However, our knowledge regarding the virulence and pathogenic potential of these microorganisms in the plastisphere remains limited. This study quantified the abundance of virulence factor genes (VFGs) in the plastisphere and its surrounding environments (water and soil) to better assess pathogenic risks. Our findings revealed a selective enrichment of VFGs in the plastisphere, which were attributed to the specific microbial community assembled. The presence of arsenic and ciprofloxacin in the plastisphere exerted additional co-selective pressures, intensifying the enrichment of VFGs. Notably, VFGs that encoded multiple functions or enhanced the survival of host microorganisms (e.g., encoding adherence functions) tended to accumulate in the plastisphere. These versatile and environmentally adaptable VFGs are more likely to be favored by bacteria in the environment, warranting increased attention in future investigations due to their potential for widespread dissemination. In terms of virulence and pathogenicity, this research offers new insights into evaluating pathogen-related risks in the plastisphere.

Assessment of the occurrence and interaction between pesticides and plastic litter from vineyard plots

In this research, aged plastic fragments collected from vineyards were characterized in terms of composition, residues of pesticides, and their potential to exchange these compounds with the aquatic media. To this end, we employed the qualitative and quantitative information provided by complementary analytical techniques, including chromatography, organic and inorganic mass spectrometry, infrared spectroscopy and electronic microscopy. Debris of weathered plastics were identified as polypropylene and polyethylene, containing different types of additives, from organic UV stabilizers to inorganic fillers, such as calcium salts. Regardless of polymer type, plastic litter collected from vineyards contained residues of pesticides, and particularly of fungicides, with total concentrations in the range of values from 114 ng g-1 to 76.4 μg g-1. Data obtained under different extraction conditions suggested that a fraction of these compounds was absorbed in aged polymers, penetrating inside the material. The parallel analysis of plastic litter and vineyard soils reflected higher pesticide residues in the former matrix. Furthermore, several fungicides, considered as labile in vineyard soils (i.e. zoxamide and folpet), were those showing the highest levels in plastic litter. Simulated sorption-desorption studies, with plastic debris in contact with surface water, demonstrated the higher affinity of aged materials by moderately polar pesticides than their new counterparts. For the first time, the manuscript highlights the presence of plastic litter in vineyards soils, reflecting the accumulation of several fungicides in this matrix, in some cases, with a different stability pattern to that observed in the soil from same vineyards.

Physical characteristics of microplastic particles and potential for global atmospheric transport: A meta-analysis

Recent interest in microplastic pollution of natural environments has brought forth samples which confirm the pollutant's omnipresence in a variety of ecosystems. This includes locations furthest removed from human activity. Atmospheric transport and deposition are suspected as the primary transport pathway to these remote locations. The factors most influential on participation in atmospheric transport are yet to be determined. This meta-analysis aims to identify patterns that exist between physical characteristics of microplastic particles and their potential for atmospheric transport. Our review addresses the following questions: Which characteristics of microplastic particles promote atmospheric transport and deposition into remote regions, and how significant are these factors in determining distance transported from their sources? This article analyzes commonly reported physical attributes-- shape, polymer composition and color-- from studies in urban and remote areas. The analysis of 68 studies, composed of data from 2078 samples, shows higher occurrence of microplastic particles in remote samples with fiber shapes, polyester compositions, and red, blue, and transparent colors. This meta-analysis is the first to identify patterns between physical properties of microplastic particles and extent of their participation in atmospheric transport to global remote locations.

Connecting the Dots: Livestock Animals as Missing Links in the Chain of Microplastic Contamination and Human Health

Plastic pollution is a global diffuse threat, especially considering its fragmentation into microplastics (MPs) and nanoplastics (NPs). Since the contamination of the aquatic environment is already well studied, most studies have now focused on the soil. Moreover, the number of studies on the exposure routes and toxic effects of MNPs in humans is continuously increasing. Although MNPs can cause inflammation, cytotoxicity, genotoxicity and immune toxicity in livestock animals, which can accumulate ingested/inhaled plastic particles and transfer them to humans through the food chain, research on this topic is still lacking. In considering farm animals as the missing link between soil/plant contamination and human health effects, this paper aims to describe their importance as carriers and vectors of MNP contamination. As research on this topic is in its early stages, there is no standard method to quantify the amount and the characteristics of MNPs in different matrices. Therefore, the creation of a common database where researchers can report data on MNP characteristics and quantification methods could be helpful for both method standardization and the future training of an AI tool for predicting the most abundant/dangerous polymer(s), thus supporting policy decisions to reduce plastic pollution and perfectly fitting with One Health principles.

Microplastics meet invasive plants: Unraveling the ecological hazards to agroecosystems

The objective of this study was to assess the combined impact of environmental microplastic pollution and biological invasion which represent critical global eco-environmental challenges. The invasion of Solidago canadensis L. and soil microplastic contamination in the agroecosystem pose severe hazards to soil and plant ecology and human health. Oryza sativa L. (rice) was examined after individual and combined exposure to Solidago canadensis L. invasion (SI) and soil polyethylene microplastic contamination (MPc). Comparing the individual and combination treatments to the control, leaf biomass decreased, with varying changes in carbon, nitrogen, and phosphorus. Antioxidant enzyme activity and reactive oxygen species levels were significantly reduced following SI exposure and increased following the combined treatment (SI × MP). In contrast, ascorbate peroxidase and catalase activities were reduced after the combined treatment. Due to the confluence of various abiotic stressors, the combined treatment had a higher impact on leaf metabolites than the singular SI and MPc treatments. However, in comparison, the combined treatment significantly influenced the metabolic profile. In conclusion, the interaction between SI and MPc resulted in significant metabolic alterations. These changes were characterized by shifts in metabolite pools influenced by antioxidant enzyme activities and nutrient content, ultimately enhancing defense mechanisms within rice crops. Consequently, these stressors threaten the food safety, sustainability, and agricultural output of crops. The co-exposure of invasive plants and microplastics sheds light on the bio-ecological risks associated with microplastics in staple foods and offers valuable insights into the phytotoxicity of invasive plants in the presence of polyethylene microplastics.

Nano- and micro-plastic transport in soil and groundwater environments: Sources, behaviors, theories, and models

With the increasing use of plastics, nano- and micro-plastic (NMP) pollution has become a hot topic in the scientific community. Ubiquitous NMPs, as emerging contaminants, are becoming a global issue owing to their persistence and potential toxicity. Compared with studies of marine and freshwater environments, investigations into the sources, transport properties, and fate of NMPs in soil and groundwater environments remain at a primary stage. Hence, the promotion of such research is critically important. Here, we integrate existing information and recent advancements to compile a comprehensive evaluation of the sources and transport properties of NMPs in soil and groundwater environments. We first provide a systematic description of the various sources and transport behaviors of NMPs. We then discuss the theories (e.g., clean-bed filtration and Derjaguin-Landau-Verwey-Overbeek theories) and models (e.g., single-site and dual-site kinetic retention and transport models) of NMP transport through saturated porous media. Finally, we outline the potential limitations of current research and suggest directions for future research. Overall, this review intends to assimilate and outline current knowledge and provide a useful reference frame to determine the sources and transport properties of NMPs in soil and groundwater environments.

Microplastic pollution in the groundwater under a bedrock island in the South China sea

Groundwater is the only freshwater resource on islands. Research on microplastic pollution in groundwater on islands is scarce. This study is the first to explore microplastic pollution in the groundwater under a bedrock island (Dawanshan Island) located in the South China Sea. The influence of hydrogeological factors on the distribution, source, and ageing features of microplastics in the groundwater were investigated. Despite the small scale of industrial and agricultural activities on the island, the amount of microplastics in the groundwater ranged from 34 to 64 particles/L, with over 80% of the microplastics being polyester fibres with diameters smaller than 2 mm, which is comparable to those in coastal cities. These microplastics were originated from inland plastic usage, rather than from the surrounding sea, which was confirmed by the lack of seawater intrusion on the island. Owing to the low permeability of granite, microplastics were mainly distributed in the water of the loose layer of porous sediment, and their quantity decreased with depth. In addition, the abundance of microplastics in pore groundwater increased with an increase in the velocity of groundwater flow. The severity of microplastic pollution in the groundwater increased with an increase and decrease in the content of total dissolved solids and dissolved oxygen, respectively. The microplastics originated from plastic waste disposed of on the island, rather than from seawater intrusion. Also, through groundwater infiltration into exposed soil at recharge areas, artificial wells at residential areas, and water exchange with surface water at valley areas. Microplastics buried in the groundwater aged faster along the migration path of the groundwater. These microplastics threaten the safety of people and plants on the island through exposure resulting from the extraction of groundwater for irrigation, while they endanger marine life through submarine groundwater discharge.

Combined effects of bacteria and antibiotics on surface properties and transport of nanoplastics in porous media

Currently, research on the individual effects of bacteria and antibiotics on the transport of nanoplastics (NPs) in porous media is in its infancy, while research on their combined effect is absent. It is well known that bacteria and antibiotics also interact with each other, so this synergistic transport of bacteria, antibiotics, and NPs in porous media must be very interesting. For exploring this aspect, we investigated the individual and combined effects of bacteria and antibiotics on the transport of polystyrene NPs (PS-NPs) in saturated porous media. Hydrophobicity, roughness, and the Derjaguin-Landau-Verwey-Overbeek (DLVO) interaction energy were measured and calculated. The PS-NPs' transport in porous media was fitted using a mathematical model. Enhanced roughness and size of PS-NPs with increased bacterial concentration dominated and inhibited the PS-NPs' transport in porous media, although the hydrophilicity of PS-NPs and the energy barrier between PS-NPs and porous media were also increased. An increase in antibiotic concentration reduced the energy barrier between PS-NPs and porous media, thereby decreasing the PS-NPs' transport. Combined effects of bacteria and antibiotics on the PS-NPs' transport were complex and distinct from individual effects, but the mechanisms were clear. Roughness and hydrophilicity of PS-NPs and the DLVO interaction energy between PS-NPs and porous media together influenced this process. In the presence of bacteria, antibiotics could alter the bacterial surface roughness by altering bacterial extracellular polymeric substances, and thus alter the PS-NPs' surface roughness, thereby affecting the PS-NPs' transport in porous media. When antibiotics were present, enhanced bacterial concentration increased the PS-NPs' hydrophilicity and the energy barrier between PS-NPs and porous media, thus promoting the PS-NPs' transport. The findings of this study provided a theoretical basis for clarifying the transport of NPs in porous media under complex environments, facilitating a reduction in environmental pollution of NPs.

Transport of polystyrene nanoplastics in porous media: Combined effects of two co-existing substances

Both surfactants and natural organic matters (NOMs) are substances commonly found in aqueous environments, and their effects on the transport of nanoplastics that is gradually gaining widespread attention in porous media are currently in their infancy, while their combined effects are absent. We investigated innovatively the combined effect of surfactants and NOMs on the transport of polystyrene nanoplastics (PS-NPs) in saturated porous media. Adsorption tests of surfactants and NOMs onto PS-NPs, adsorption tests of PS-NPs onto quartz sand, and transport tests of PS-NPs in saturated quartz sand were conducted. Hydrophobicity and Derjaguin-Landau-Verwey-Overbeek (DLVO) interaction energy were measured and calculated. A mathematical model was employed to fit the transport of PS-NPs in porous media. It was found that the effects and action mechanisms of cationic cetyl trimethylammonium bromide (CTAB) and anionic sodium dodecylbenzene sulfonate (SDBS) on the transport of PS-NPs in porous media were distinct. In the presence of CTAB, 1 mg/L humic acid (HA) and 10 mg/L sodium alginate (SA) could promote aggregation of PS-NPs by decreasing the absolute zeta potential of PS-NPs, and reducing the energy barrier between PS-NPs and porous media and increasing the blocking and straining, thus inhibiting the transport of PS-NPs. In the presence of SDBS, SA and HA could improve the adsorption of SDBS onto PS-NPs by bridging and increasing adsorption sites, thus increasing the hydrophilicity of PS-NPs and improving the transport of PS-NPs. Whether or not NOMs were present, the transport of PS-NPs in porous media was mainly governed by the DLVO interaction energy in the presence of cationic surfactants and by hydrophobicity in the presence of anionic surfactants. This innovative observation has led to an understanding on the environmental behaviour of nanoplastics in porous media under complex environments.

Microplastic characteristics and microplastic-heavy metal synergistic contamination in agricultural soil under different cultivation modes in Chengdu, China

Microplastics have significant implications for global ecosystems. The microplastic distribution, types, sources, and quantified microplastic-heavy metal synergistic pollution in agricultural soil in Chengdu, China were analyzed. The microplastics were detected in all soil samples collected from 103 sites, with concentrations ranging from 1333 to 15067 particle kg-1. The abundance of microplastics in grassland (12,667 ± 3394 particle kg-1) was more than twice higher than that in open field, vegetable field, orchard, and woodland. The main morphological types of microplastics included fibers, films, and granules (all "3-Dimensional" microplastics), with the colors red, blue, and transparent. Granular and fiber microplastics were predominantly in particles < 500 mm, while film microplastics were uniformly distributed at all sizes. The plastic compositions were mainly polypropylene and polyethylene plastics, accounting for 20.73% and 27.90% of the soil microplastic, respectively. Agricultural plastic applications and irrigation water were the sources of soil microplastics. The concentration of Cd, Cr, and Cu in the microplastics was strongly correlated with the corresponding concentration in the soils (p < 0.01), and the microplastic-heavy metal synergistic pollution might deteriorate the soil environment. The results of soil TOC measurements were influenced by microplastics in the soil. The results provide important data for the characteristics of microplastics in the agroecosystem.

Fast Depolymerization of PET Bottle Mediated by Microwave Pre-Treatment and An Engineered PETase

Recycling plastics is the key to reaching a sustainable materials economy. Biocatalytic degradation of plastics shows great promise by allowing selective depolymerization of man-made materials into constituent building blocks under mild aqueous conditions. However, insoluble plastics have polymer chains that can reside in different conformations and show compact secondary structures that offer low accessibility for initiating the depolymerization reaction by enzymes. In this work, we overcome these shortcomings by microwave irradiation as a pre-treatment process to deliver powders of polyethylene terephthalate (PET) particles suitable for subsequent biotechnology-assisted plastic degradation by previously generated engineered enzymes. An optimized microwave step resulted in 1400 times higher integral of released terephthalic acid (TPA) from high-performance liquid chromatography (HPLC), compared to original untreated PET bottle. Biocatalytic plastic hydrolysis of substrates originating from PET bottles responded to 78 % yield conversion from 2 h microwave pretreatment and 1 h enzymatic reaction at 30 °C. The increase in activity stems from enhanced substrate accessibility from the microwave step, followed by the administration of designer enzymes capable of accommodating oligomers and shorter chains released in a productive conformation.

Hydrodynamics and effect of velocity on particle filtration due to bridging in water-saturated porous media using CFD-DEM simulation

Particle bridging owing to the confinement of the pore structure affects the transport and retention of particles in porous media. Particle motion driven by gravities were well investigated, whose filtration is mainly affected by the ratio of the particle diameter to the pore throat size of the medium. However, particles whose motions are driven by the fluid is essential to be investigated for particle separation from the carrying fluid. In this study, the motion of particles was driven by the liquid when passing through a water-saturated porous medium. The fluid-particle flow in a porous medium was modeled using computational fluid dynamics-discrete element method. The motion of particles in the slurry was traced in the porous medium, which enabled particle clogging to be directly precited by the interaction between the particles and pore surfaces by assessing the exact location of each particle. The pressure and flow field of the liquid were investigated, and the variation in flow path owing to particle clogging was predicted. The hydrodynamic study also showed that the Stokes number and particle concentration determined the particle clogging at the pore throats of the porous medium. Increasing the fluid velocity of particles such that the Stokes number was almost equal to 1 increased the separation efficiency of particles. Further increasing the fluid velocity reduced the residence time, which reduced the separation efficiency of the particles.

A Review of Biodegradable Plastics: Chemistry, Applications, Properties, and Future Research Needs

Environmental concerns over waste plastics' effect on the environment are leading to the creation of biodegradable plastics. Biodegradable plastics may serve as a promising approach to manage the issue of environmental accumulation of plastic waste in the ocean and soil. Biodegradable plastics are the type of polymers that can be degraded by microorganisms into small molecules (e.g., H2O, CO2, and CH4). However, there are misconceptions surrounding biodegradable plastics. For example, the term "biodegradable" on product labeling can be misconstrued by the public to imply that the product will degrade under any environmental conditions. Such misleading information leads to consumer encouragement of excessive consumption of certain goods and increased littering of products labeled as "biodegradable". This review not only provides a comprehensive overview of the state-of-the-art biodegradable plastics but also clarifies the definitions and various terms associated with biodegradable plastics, including oxo-degradable plastics, enzyme-mediated plastics, and biodegradation agents. Analytical techniques and standard test methods to evaluate the biodegradability of polymeric materials in alignment with international standards are summarized. The review summarizes the properties and industrial applications of previously developed biodegradable plastics and then discusses how biomass-derived monomers can create new types of biodegradable polymers by utilizing their unique chemical properties from oxygen-containing functional groups. The terminology and methodologies covered in the paper provide a perspective on directions for the design of new biodegradable polymers that possess not only advanced performance for practical applications but also environmental benefits.

Lipid Corona Formation on Micro- and Nanoplastic Particles Modulates Uptake and Toxicity in A549 Cells

Plastic waste is a global issue leaving no continents unaffected. In the environment, ultraviolet radiation and shear forces in water and land contribute to generating micro- and nanoplastic particles (MNPP), which organisms can easily take up. Plastic particles enter the human food chain, and the accumulation of particles within the human body is expected. Crossing epithelial barriers and cellular uptake of MNPP involves the interaction of plastic particles with lipids. To this end, we generated unilamellar vesicles from POPC (1-palmitoyl-2-oleoyl-glycero-3-phosphocholine) and POPS (1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-L-serine) and incubated them with pristine, carboxylated, or aminated polystyrene spheres (about 1 µm in diameter) to generate lipid coronas around the particles. Lipid coronas enhanced the average particle sizes and partially changed the MNPP zeta potential and polydispersity. In addition, lipid coronas led to significantly enhanced uptake of MNPP particles but not their cytotoxicity, as determined by flow cytometry. Finally, adding proteins to lipid corona nanoparticles further modified MNPP uptake by reducing the uptake kinetics, especially in pristine and carboxylated plastic samples. In conclusion, our study demonstrates for the first time the impact of different types of lipids on differently charged MNPP particles and the biological consequences of such modifications to better understand the potential hazards of plastic exposure.

Biobased, Macro-, and Nanoscale Fungicide Delivery Approaches for Plant Fungi Control

In this report, two polymeric matrix systems at macro and nanoscales were prepared for efficacious fungicide delivery. The macroscale delivery systems used millimeter-scale, spherical beads composed of cellulose nanocrystals and poly(lactic acid). The nanoscale delivery system involved micelle-type nanoparticles, composed of methoxylated sucrose soyate polyols. Sclerotinia sclerotiorum (Lib.), a destructive fungus affecting high-value industrial crops, was used as a model pathogen against which the efficacy of these polymeric formulations was demonstrated. Commercial fungicides are applied on plants frequently to overcome the transmission of fungal infection. However, fungicides alone do not persist on the plants for a prolonged period due to environmental factors such as rain and airflow. There is a need to apply fungicides multiple times. As such, standard application practices generate a significant environmental footprint due to fungicide accumulation in soil and runoff in surface water. Thus, approaches are needed that can either increase the efficacy of commercially active fungicides or prolong their residence time on plants for sustained antifungal coverage. Using azoxystrobin (AZ) as a model fungicide and canola as a model crop host, we hypothesized that the AZ-loaded macroscale beads, when placed in contact with plants, will act as a depot to release the fungicide at a controlled rate to protect plants against fungal infection. The nanoparticle-based fungicide delivery approach, on the other hand, can be realized via spray or foliar applications. The release rate of AZ from macro- and nanoscale systems was evaluated and analyzed using different kinetic models to understand the mechanism of AZ delivery. We observed that, for macroscopic beads, porosity, tortuosity, and surface roughness governed the efficiency of AZ delivery, and for nanoparticles, contact angle and surface adhesion energy were directing the efficacy of the encapsulated fungicide. The technology reported here can also be translated to a wide variety of industrial crops for fungal protection. The strength of this study is the possibility of using completely plant-derived, biodegradable/compostable additive materials for controlled agrochemical delivery formulations, which will contribute to reducing the frequency of fungicide applications and the potential accumulation of formulation components in soil and water.

Formation, behavior, properties and impact of micro- and nanoplastics on agricultural soil ecosystems (A Review)

Micro and nanoplastics (MPs and NPs, respectively) in agricultural soil ecosystems represent a pervasive global environmental concern, posing risks to soil biota, hence soil health and food security. This review provides a comprehensive and current summary of the literature on sources and properties of MNPs in agricultural ecosystems, methodology for the isolation and characterization of MNPs recovered from soil, MNP surrogate materials that mimic the size and properties of soil-borne MNPs, and transport of MNPs through the soil matrix. Furthermore, this review elucidates the impacts and risks of agricultural MNPs on crops and soil microorganisms and fauna. A significant source of MPs in soil is plasticulture, involving the use of mulch films and other plastic-based implements to provide several agronomic benefits for specialty crop production, while other sources of MPs include irrigation water and fertilizer. Long-term studies are needed to address current knowledge gaps of formation, soil surface and subsurface transport, and environmental impacts of MNPs, including for MNPs derived from biodegradable mulch films, which, although ultimately undergoing complete mineralization, will reside in soil for several months. Because of the complexity and variability of agricultural soil ecosystems and the difficulty in recovering MNPs from soil, a deeper understanding is needed for the fundamental relationships between MPs, NPs, soil biota and microbiota, including ecotoxicological effects of MNPs on earthworms, soil-dwelling invertebrates, and beneficial soil microorganisms, and soil geochemical attributes. In addition, the geometry, size distribution, fundamental and chemical properties, and concentration of MNPs contained in soils are required to develop surrogate MNP reference materials that can be used across laboratories for conducting fundamental laboratory studies.

Distinctive adsorption and desorption behaviors of temporal and post-treatment heavy metals by iron nanoparticles in the presence of microplastics

There are increasing concerns about microplastic (MP) pollution in the natural environment. Consequently, numerous physicochemical and toxicological studies have been conducted on the effects of MPs. However, few studies have concerned the potential impact of MPs on contaminated site remediation. We herein investigated the influence of MPs on the temporary and post heavy metal removal by iron nanoparticles, including pristine and sulfurized nano zero-valent irons (nZVI and S-nZVI). MPs inhibited adsorption of most heavy metals during the treatment of iron nanoparticles, and facilitated their desorption, such as Pb (II) from nZVI and Zn (II) from S-nZVI. However, such effects presented by MPs was usually less than those by dissolved oxygen (DO). Most desorption cases are irrelevant to the reduced formats of heavy metals involving redox reactions, such as Cu (I) or Cr (III), suggesting that the influence of MPs on metals are limited to those binding with iron nanoparticles through surface complexation or electrostatic interaction. As another common factor, natural organic matter (NOM) had almost no influence on the heavy metal desorption. These insights shed lights for enhanced remediation of heavy metals by nZVI/S-NZVI in the presence of MPs.

Recycled polyvinyl chloride microplastics: investigation of environmentally relevant concentrations on toxicity in adult zebrafish

Recycled polyvinyl chloride (PVC) microplastics have been detected in the aquatic environment. These recycled microparticles contain chemicals that are released into the environment reaching different organisms. Although the problem of the presence of recycled PVC microparticles in the environment is evident, the toxicological consequences of this contaminant to exposed organisms remains to be better determined. The aim of this study was to investigate the toxicity attributed to exposure to environmentally relevant concentrations of recycled PVC microplastics in adult zebrafish (Danio rerio). The experimental groups were: negative control, vehicle control, positive control, and recycled microplastics (20 ± 5 μm) at 5, 10 or 20 μg/L. Zebrafish (D. rerio) were exposed to respective treatments for 96 hr. Locomotion and oxidative status parameters were measured and mortality recorded. The positive control group presented increased mortality rates and decreased locomotor activity. Animals from the vehicle group did not show marked differences. Finally, no significant disturbances were found in survival rate, locomotion pattern and oxidative status of animals exposed to recycled PVC microparticles at 5, 10 or 20 μg/L. Taken together our results suggest that recycled PVC microplastics in this particle size range do not appear to exert harmful effects on exposed adult D. rerio. However, these results need to be carefully observed due to limitations including size of particle and duration of exposure parameters that might affect ecological consequences. It is suggested that additional studies applying other particles sizes and chronic exposure are needed to more comprehensively verify the toxicity of the contaminant investigated here.

Microplastics in caves: A new threat in the most famous geo-heritage in the world. Analysis and comparison of Italian show caves deposits

Microplastic pollution represent a worldwide concern, however, in karst areas is still largely unknown, especially in underground environments. Caves are the most important geological heritage worldwide, rich in speleothems, unique ecosystems custodians of important drinking water reserves, and a significant economic resource. Thank to their relatively stable environmental conditions, they can preserve information for a long time such as paleontological/archaeological remains, however, these characteristics make caves vulnerable environments too, easily damaged by climate variations and pollution. To increase the current knowledge of microplastic pollution, the deposits of different Italian show caves were investigated, improving the method for microplastic separation. Microplastic were identified and characterised using MUPL automated software, observed with and without UV light under a microscope, and verified under μFTIR-ATR, highlighting the importance of combine different methods. Microplastics were present in sediments of all examined caves, and were always greater along the tourist route (an average of 4300 items/kg) than the speleological areas (an average of 2570 items/kg). Microplastics less than 1 mm dominated the samples and the amount increased with the decrease in the size considered. Fibre-shaped dominated the samples and 74% particles was fluorescent under UV light. Analysed sediment samples contained especially polyesters and polyolefins. Our results highlight the presence of microplastic pollution in show caves, giving useful information to assess risks posed by microplastics in show caves and emphasizing the importance of pollutants monitoring in underground environments to define strategies for the conservation and management of caves and natural resources.

First insight into microplastic groundwater pollution in Latin America: the case of a coastal aquifer in Northwest Mexico

Microplastics have been studied on biota and other environmental domains, such as soils. Despite the importance of groundwater as a resource for millions of people worldwide as drinking water and personal hygiene, domestic, agricultural, mining, and industrial purposes, there are very few studies concerning microplastics in this domain around the world. We present the first study in Latin America addressing this topic. Six capped boreholes were analyzed in terms of abundance, concentration, and chemical characterization, at three different depths, from a coastal aquifer in Northwest Mexico. This aquifer is highly permeable and affected by anthropogenic activities. A total of 330 microplastics were found in the eighteen samples. In terms of concentration, the interval ranged from 10 to 34 particles/L, with an average of 18.3 particles/L. Four synthetic polymers were identified: isotactic polypropylene (iPP), hydroxyethylcellulose (HEC), carboxylated polyvinyl chloride (PVC), and low-density polyethylene (LDPE); with iPP being the most abundant (55.8%) in each borehole. Agriculture activities and septic outflows are considered the potential regional sources of these contaminants into the aquifer. Three possible transport pathways to the aquifer are suggested: (1) marine intrusion, (2) marsh intrusion, and (3) infiltration through the soil. More research about the occurrence, concentration, and distribution of the different kinds of microplastics in groundwater is needed to have a better understanding of the behavior and health risks to organisms, including human beings.

Improving the Detectability of Microplastics in River Waters by Single Particle Inductively Coupled Plasma Mass Spectrometry

Detection of microplastics in environmental samples requires fast, sensitive and selective analytical techniques, both in terms of the size of the microparticles and their concentration. Single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) allows the detection of plastic particles down to ca. 1 µm and down to concentrations of 100 particles per mL. In SP-ICP-MS, detection of carbon-containing particles is hampered by the presence of other forms of carbon (carbonates, organic matter, microorganisms…). An acidic pre-treatment of river water samples with 10% (v/v) nitric acid for 24 h allowed the reduction of the presence of dissolved carbon to ultrapure water levels and the digestion of potential microorganisms in the samples, recovering polystyrene microparticles up to 80%. Carbon-containing particles were detected in most of the samples analysed from Spanish and French Pyrenean rivers. The presence of microplastics in these samples was confirmed by Raman microscopy and their morphology was defined by electron microscopy combined with energy-dispersive X-ray spectroscopy. The developed SP-ICP-MS method is suitable for the rapid screening of river waters for the presence of microplastics, which can then be analysed by inherently slower but more selective techniques (e.g., Raman microscopy).

Influences of input concentration, media particle size, metal cation valence, and ionic concentration on the transport, long-term release, and particle breakage of polyvinyl chloride nanoplastics in saturated porous media

The environmental impact of nanoplastics has gradually attracted widespread attention; however, nanoplastics of polyvinyl chloride, one of the most commonly used plastics, have not yet been studied. In this study, we investigated the transport, long-term release behavior, and particle fracture of polyvinyl chloride nanoplastics (PVC NPs) in saturated quartz sand with different metal cations, ionic concentrations, input concentrations, and sand grain sizes by determining breakthrough, long-term release, and particle size distribution curves. The breakthrough curves and retention profiles were simulated by a mathematical model. The transport of PVC NPs increased with increased input concentration and sand grain size, which could be predicted by the Derjaguin-Landau-Verwey-Overbeek (DLVO) and colloid filtration theories. Increased ionic concentration and metal cation valence could restrain the transport of PVC NPs in saturated quartz sand owing to the decreased energy barrier between PVC NPs and sand grains. The total released amount of PVC NPs in the long-term release tests with different experimental conditions ranged from 3.91 to 21.95%. Increased sand grain size and decreased metal cation valence and ionic concentration resulted in an increased released amount of retained PVC NPs in saturated quartz sand, indicating increased release ability and mobility. The particle fracture results indicated that the PVC NPs were not broken down during long-term release under the experimental conditions of this research. This opens up a completely new and meaningful study of whether nanoplastics are broken down into smaller nanoplastics during their long-term release under various conditions.

Assessment of cryogenic pretreatment for simulating environmental weathering in the formation of surrogate micro- and nanoplastics from agricultural mulch film

Microplastics (MPs) and nanoplastics (NPs) from mulch films and other plastic materials employed in vegetable and small fruit production pose a major threat to agricultural ecosystems. For conducting controlled studies on MPs' and NPs' (MNPs') ecotoxicity to soil organisms and plants and fate and transport in soil, surrogate MNPs are required that mimic MNPs that form in agricultural fields. We have developed a procedure to prepare MPs from plastic films or pellets using mechanical milling and sieving, and conversion of the resultant MPs into NPs through wet grinding, both steps of which mimic the degradation and fragmentation of plastics in nature. The major goal of this study was to determine if cryogenic exposure of two biodegradable mulch films effectively mimics the embrittlement caused by environmental weathering in terms of the dimensional, thermal, chemical, and biodegradability properties of the formed MNPs. We found differences in size, surface charge, thermal and chemical properties, and biodegradability in soil between MNPs prepared from cryogenically treated vs. environmentally weathered films, related to the photochemical reactions occurring in the environment that were not mimicked by cryogenic treatment, such as depolymerization and cross-link formation. We also investigated the size reduction process for NPs and found that the size distribution was bimodal, with populations centered at 50 nm and 150-300 nm, and as the size reduction process progressed, the former subpopulation's proportion increased. The biodegradability of MPs in soil was greater than for NPs, a counter-intuitive trend since greater surface area exposure for NPs would increase biodegradability. The result isassociated with differences in surface and chemical properties and to minor components that are readily leached out during the formation of NPs. In summary, the use of weathered plastics as feedstock would likely produce MNPs that are more realistic than cryogenically-treated unweathered films for use in experimental studies.

Prevalence and implications of microplastics in potable water system: An update

Synthetic plastics, which are lightweight, durable, elastic, mouldable, cheap, and hydrophobic, were originally invented for human convenience. However, their non-biodegradability and continuous accumulation at an alarming rate as well as subsequent conversion into micro/nano plastic scale structures via mechanical and physio-chemical degradation pose significant threats to living beings, organisms, and the environment. Various minuscule forms of plastics detected in water, soil, and air are making their passage into living cells. High temperature and ambient humidity increase the degradation potential of plastic polymers photo-catalytically under sunlight or UV-B radiations. Microplastics (MPs) of polyethylene terephthalate, polyethylene, polystyrene, polypropylene, and polyvinyl chloride have been detected in bottled water. These microplastics are entering into the food chain cycle, causing serious harm to all living organisms. MPs entering into the food chain are usually inert in nature, possessing different sizes and shapes. Once they enter a cell or tissue, it causes mechanical damage, induces inflammation, disturbs metabolism, and even lead to necrosis. Various generation routes, types, impacts, identification, and treatment of microplastics entering the water bodies and getting associated with various pollutants are discussed in this review. It emphasizes potential detection techniques like pyrolysis, gas chromatography-mass spectrometry (GC-MS), micro-Raman spectroscopy, and fourier transform infrared spectroscopy (FT IR) spectroscopy for microplastics from water samples.

An analytical framework on the leaching potential of veterinary pharmaceuticals: A case study for the Netherlands

Veterinary pharmaceuticals (VPs) residues may end up on the soil via manure, and from there can be transported to groundwater due to leaching. In this study an analytical framework to estimate the leaching potential of VPs at the national scale is presented. This approach takes soil-applied VPs concentrations, soil-hydraulic and soil-chemical properties, groundwater levels, sorption and degradation of VPs into account. For six commonly soil-applied VPs in the Netherlands, we assess quantities leached to groundwater and their spatial distribution, as well as the relative importance of processes that drive leaching. Our results for VPs Oxytetracycline, Doxycycline, and Ivermectin indicate that maximum quantities that may leach to groundwater are very low, i.e. ≪1 μg/ha, hence spatial differences are not investigated. For VPs Sulfadiazine and Flubendazole we identify a few regions that are potentially prone to leaching, with leached quantities higher than 1 μg/ha. Leaching patterns of these two VPs are dominated by soil properties and groundwater levels rather than soil-applied quantities. For Dexamethasone, even though applied on the soil in much lower concentrations compared to other investigated VPs, spatially widespread leaching to groundwater is found, with leached quantities higher than 1 μg/ha. Due to the leaching affinity of Dexamethasone, variations in the soil-applied amounts have significant influence on the quantities leached to groundwater. Dexamethasone is highlighted as important for the future environmental risk assessment efforts. This study has shown that the leaching potential of VPs is not determined by one single parameter, but by a combination of parameters. This combination also depends on the compound investigated.

Preliminary investigations of microplastic pollution in karst systems, from surface watercourses to cave waters

Microplastic pollution in different environments has increasingly been documented in detail in recent times, but it is still poorly studied in caves and karst aquifers. To deepen the knowledge of microplastic pollution, for karst environment protection and conservation purposes, we collected and investigated different water samples from a karst area of Italy, considering connected surface and cave waters. Microplastics were extracted from water samples by filtration and subjected to organic matter removal with 15% hydrogen peroxide solution. Microplastics on filters were counted and characterised (size, colour, shape) via visual identification under a microscope, with and without UV light, exploiting fluorescence given by fluorescent whitening additives contained in plastic materials. Finally, spectroscopic analyses were carried out on 10% of the microplastics observed on each filter. The concentration of microplastics in cave waters varied from 12 to 54 items/L, with a mean value of 28 items/L. In the surface water of a tributary, it was of 23 items/L, and in the downstream, it was 29 items/L. Fibres represented the most abundant shape (95.1%) in the karst system waters, and most microplastics (82.9%) were smaller than 1 mm. The majority of the microplastics were fluorescent under UV light (84.8%), and most fluorescent particles were transparent (46%). However, black microplastics (68%) were more common among the non-fluorescent ones. Polyethylene (51.7%) was the main type of microplastics found in the karst system waters. Our results show the presence of microplastics in karst systems and provide useful information for future research. Karst aquifers are open systems, subjected to possible contamination by surface pollutants. Microplastics in karst systems can be consumed by animals, damage ecosystems and contaminate water resources; surface karst areas and underground environments should therefore be monitored and protected, especially regarding the management of water resources. To further understand the sources and transport of microplastics within a karst system, analyses on a greater range of surface and subterranean waters throughout the world are required.

Microplastics contamination in groundwater of a drinking-water source area, northern China

Although the contamination of microplastics (MPs) in groundwater has been anticipated, their occurrence, distribution, and composition require further understanding. In this study, the occurrence and distributions of MPs were investigated in shallow groundwater from an important water source district in Tianjin city of northern China. The abundance, the physical morphology, the chemical composition, and the potential correlations of the determined MPs with human activities were thoroughly characterized. MPs were determined from all ten sampling sites with the abundance ranged between 17.0 ± 2.16 to 44.0 ± 1.63 n/L, revealing the ubiquitous existed MPs contamination. Based on the physical categorization, fiber (44.74%) was the most abundant shape, while blue (31.02%) and transparent (26.09%) were the most prevalent colors. The dominant size of MPs was smaller than 200 μm which accounted for 73.10%. A total of seven types of MPs were determined with polyethylene, polyethylene terephthalate, and polystyrene as the main types, of which, polypropylene showed strong positive correlations with polystyrene, indicating the possible similar sources of them. Besides, the determined MPs in groundwater were greater in areas with the high population density and strong population activity, indicating their high correlation with human activity. The study highlighted the presence of MPs in groundwater of drinking water source in northern China and provided useful information for evaluating the potential ecological effects on water quality safety and human health brought by MPs.

State of knowledge and future research needs on microplastics in groundwater

Microplastics (MPs) are widespread in aquatic and soil environments. This study targets the issue of MPs' transfer from soil to groundwater. Scientific papers were collected and analyzed using a text-mining approach that classifies text segments. This allowed the identification of four research topics and the organization of the results into a summarizing table. Those four topics are sources of groundwater MPs, main types of MPs (physico-chemical properties, polymer units, shapes, and size), human exposure (mainly drinking water), and potential environmental and human effects. Compared to the research of MP on aquatic or soil compartments, scientific data on MP in groundwater are less substantial. Current results show a divergence due to differences in context (alluvial aquifer, fractured rock aquifer, karst aquifer, etc), collecting, sampling, and analytical methods. This divergence requires further research with standardized analytic protocols and reference materials. The associated research gaps were identified by using the same approach. The following five topics emerged: (1) the transfer of MPs from soil to underground, (2) the contribution of groundwater to drinking water microplastic pollution, (3) the interaction with other contaminants, (4) the human and environmental effects, and (5) the protective and remediation solutions.

High-yield and nitrogen self-doped hierarchical porous carbon from polyurethane foam for high-performance supercapacitors

Confronted with the environmental pollution and energy crisis issues, upcycling of waste plastics for energy-storage applications has attracted broad interest. Polyurethane (PUR) is a potential candidate for the preparation of N-doped carbon materials. However, its low carbon yield limits the utilization of PUR waste. In this study, PUR foam was converted into N-doped hierarchical porous carbon (NHPC) through an autogenic atmosphere pyrolysis (AAP)-KOH activation approach. An ultra-high carbon yield of 55.0% was achieved through AAP, which is more than 17 times the carbon yield of conventional pyrolysis of PUR. AAP converted 83.2% of C and 61.0% of N in PUR into derived carbon material. The high conversion rate and self-doping effect can increase the environmental and economic benefits of this approach. KOH activation significantly increased the specific surface area of carbon materials to 2057 m² g^-1 and incorporated hierarchical porous structure and O-containing functional groups to the carbon materials. The obtained NHPCs were applied to improve the performance of supercapacitors. The electrochemical measurement revealed that NHPCs exhibited a high specific capacitance of 342 F g^-1 (133 F cm^-3) at 0.5 A g^-1, low resistance, and outstanding cycling stability. The energy density and power density of the supercapacitor were improved to 11.3 W h kg^-1 and 250 W kg^-1, respectively. This research developed a possible solution to plastic pollution and energy shortage.

Occurrence status of microplastics in main agricultural areas of Xinjiang Uygur Autonomous Region, China

A large number of plastic products are used in the process of agricultural production, and the recycling efficiency is low, which leads to the production of a large number of microplastics. Therefore, the microplastic contamination in agricultural areas requires being investigated urgently. In addition, the occurrence characteristics of microplastics are also different in agricultural areas with various land use modes. In this study, the main agricultural areas in Xinjiang are taken as the research object. The abundance of microplastics in the main agricultural areas in Xinjiang ranges from 288 to 1452 items/kg. The shape of microplastics is mainly bulks, and white microplastics account for the highest proportion, and the majority of their sizes are less than 0.5 mm. The risk assessment results show that the contamination risk index of microplastics in this area is 108.92 and the risk level is grade III. The research shows that there is little difference in the abundance of microplastics between paddy field and garden land, which may be because there are few sources of microplastics in the land of these two utilization modes, and the potential pollution sources are similar, such as the atmospheric deposition of microplastics, the falling of fibers on people's clothes during farming, and the agricultural use of sludge. This study can provide a reference for further study on the existing circumstances of microplastics in agricultural areas.