Simultaneous removal of multiple polycyclic aromatic hydrocarbons (PAHs) from urban stormwater using low-cost agricultural/industrial byproducts as sorbents

MOF-derived porous carbon microspheres Ni@C-acid as solid-phase microextraction coating for extraction of polycyclic aromatic hydrocarbons from tea infusions

The improvement of the stability and adsorption properties of materials on targets in sample pre-treatment has long been an objective. Extensive efforts have been made to achieve this goal. In this work, metal-organic framework Ni-MOF precursors were first synthesized by solvothermal method using polyvinylpyrrolidone (PVP) as an ideal templating agent, stabiliser and nanoparticle dispersant. After carbonization and acid washing, the nanoporous carbon microspheres material (Ni@C-acid) was obtained. Compared with the material without acid treatment (Ni@C), the specific surface area, pore volume, adsorption performance of Ni@C-acid were increased. Thanks to its excellent characteristics (high stability, abundant benzene rings), Ni@C-acid was used as fiber coatings in headspace solid-phase microextraction (HS-SPME) technology for extraction and preconcentration of polycyclic aromatic hydrocarbons (PAHs) prior to gas chromatography-flame ionization detector (GC-FID) analysis. The experimental parameters of extraction temperature, extraction time, agitation speed, desorption temperature, desorption time and sodium chloride (NaCl) concentration were studied. Under optimal experimental conditions, the wide linear range (0.01-30 ng mL-1), the good correlation coefficient (0.9916-0.9984), the low detection limit (0.003-0.011 ng mL-1), and the high enrichment factor (5273-13793) were obtained. The established method was successfully used for the detection of trace PAHs in actual tea infusions samples and satisfied recoveries ranging from 80.94-118.62 % were achieved. The present work provides a simple method for the preparation of highly stable and adsorbable porous carbon microsphere materials with potential applications in the extraction of environmental pollutants.

Predicting the bioavailability of polycyclic aromatic hydrocarbons in rhizosphere soil using a new novel in situ solid-phase microextraction technique

In situ measurement of the bioavailability of organic pollutants in soil is crucial for understanding their environmental behavior and assessing health risks. Due to the high heterogeneity of soil, microscale determination is crucial for achieving high accuracy, but few methods are available. In this study, microsized probes coated with polydimethylsiloxane (PDMS) were used to measure the bioavailability of polycyclic aromatic hydrocarbons (PAHs) in soil in situ. The concentrations of PAHs enriched by the PDMS-coated probes correlated well with the results of bioassays using earthworms (R2 = 0.92-0.99) and ryegrass roots (R2 = 0.92-0.99). Compared with other chemical extraction methods, such as n-butanol extraction, the proposed method has advantages such as in situ operation, microvolume analysis, and negligible interference to the soil environment. In the soil rhizosphere zone, PAHs bioavailability decreased in the following order: rhizosphere > near-rhizosphere > far-rhizosphere. The bioavailability of PAHs in soil amended with biochar was also successfully characterized by the proposed method. Thus, this study developed an in situ and microscale method to predict the bioavailability of organic pollutants in contaminated soils and provides new insight into migration and transformation processes in rhizosphere soil.

Remediation of polycyclic aromatic hydrocarbons polluted soil by biochar loaded humic acid activating persulfate: performance, process and mechanisms

The remediation for polycyclic aromatic hydrocarbons contaminated soil with cost-effective method has received significant public concern, a composite material, therefore, been fabricated by loading humic acid into biochar in this study to activate persulfate for naphthalene, pyrene and benzo(a)pyrene remediation. Experimental results proved the hypothesis that biochar loaded humic acid combined both advantages of individual materials in polycyclic aromatic hydrocarbons adsorption and persulfate activation, achieved synergistic performance in naphthalene, pyrene and benzo(a)pyrene removal from aqueous solution with efficiency reached at 98.2%, 99.3% and 90.1%, respectively. In addition, degradation played a crucial role in polycyclic aromatic hydrocarbons remediation, converting polycyclic aromatic hydrocarbons into less toxic intermediates through radicals of ·SO4-, ·OH, ·O2-, and 1O2 generated from persulfate activation process. Despite pH fluctuation and interfering ions inhibited remediation efficiency in some extent, the excellent performances of composite material in two field soil samples (76.7% and 91.9%) highlighted its potential in large-scale remediation.

Examining diverse remediation mechanisms of biochar in soil contaminated with polycyclic aromatic hydrocarbon (PAH) of various ring structures: A global meta-analysis

Biochar is a widely recognized solution for addressing polycyclic aromatic hydrocarbon (PAH) contamination. However, it is unclear how the different physicochemical properties of PAHs affect remediation mechanisms, thereby affecting the remediation efficiency of biochar. In this study, a meta-analysis of 56 studies with 2236 observations was conducted to quantify the contributions of the preparation parameters and physicochemical properties of biochar, soil properties, and application measures to remediation efficiency. The research results revealed that PAH contents in the contaminated soil were significantly reduced by an average of 24.99 % after the application of biochar. Random Forest analysis identified feedstock, biochar SSA, soil pH, and rate of biochar application to be the most critical factors among the four categories. The reduction of PAH contents in the contaminated soil first decreased from 37.61 % to 17.44 % and then increased to 40.29 % with an increase in the number of aromatic rings from 2 to 6. Our study results suggest that biochar prepared from bio-waste at low temperatures could be favorable for reducing the content of NAP in soil. Wood-derived biochar pyrolyzed at a relatively high temperature is recommended for remediation of soil contaminated with PAHs with 5 or 6 aromatic rings. Our study provides a new perspective and an optimized strategy for the remediation of PAH-contaminated soils with biochar.

Role of biochar pyrolysis temperature on intracellular and extracellular biodegradation of biochar-adsorbed organic compounds

Immobilizing organic pollutants by adsorption of biochar in farmland soil is a cost-effective remediation method for contaminated soil. As the adsorption capacity of biochar is limited, biodegradation of biochar-adsorbed organic pollutants was a potential way to regenerate biochars and maintain the adsorption performance of biochars to lower the cost. It could be affected by the biochar pyrolysis temperature, but was not evaluated yet. In this study, biodegradation of adsorbed phenanthrene on a series of biochars with pyrolysis temperatures from 150 to 700 °C by Sphingobium yanoikuyae B1 was investigated using batch experiments of biodegradation kinetics at 30 °C, to explore the role of biochar pyrolysis temperature on biodegradation of biochar-adsorbed organic compounds. It was observed that 37.5-47.9% of adsorbed phenanthrene on moderate temperature-pyrolyzed biochars produced at 400 and 500 °C were biodegraded, less than that on high temperature-pyrolyzed biochars produced at ≥600 °C (48.8-60.8%) and low temperature-pyrolyzed biochars produced at ≤300 °C (63.4-92.5%). Phenanthrene adsorbed largely on the low temperature-pyrolyzed biochars by partition mechanism and thus is easily desorbed to water for a dominated intracellular biodegradation. On the high temperature-pyrolyzed biochars, phenanthrene is adsorbed largely by pore-filling mechanism and thus less desorbed to water for intracellular biodegradation. However, high temperature-pyrolyzed biochars can promote microbes to produce siderophore, H2O2 and thus release extracellular •OH for a dominated degradation of adsorbed phenanthrene by Fenton-like reaction. With the increase of biochar pyrolysis temperature, desorption and consequently the intracellular biodegradation of adsorbed phenanthrene on biochars decreased, while the secretion of siderophore and H2O2 by microbes on biochars increased to produce more extracellular •OH for degradation by Fenton-like reaction. The results could provide deep insights into the role of biochar pyrolysis temperature on biodegradation of biochar-adsorbed organic compounds, and optimize the selection of biochar with higher adsorption performance and easier regeneration for soil remediation.

Are volatile methylsiloxanes in downcycled tire microplastics? Levels and human exposure estimation in synthetic turf football fields

Downcycled rubber, derived from end-of-life tires (ELTs), is frequently applied as crumb rubber (CR) as infill of synthetic turf in sports facilities. This practice has been questioned in recent years as numerous studies have reported the presence of potentially hazardous chemicals in this material. CR particles fall into the category of microplastics (MPs), making them possible vectors for emerging micropollutants. A preliminary study where volatile methylsiloxanes (VMSs) were found in CR originated the hypothesis that VMSs are present in this material worldwide. Consequently, the present work evaluates for the first time the levels and trends of seven VMSs in CR from synthetic turf football fields, while attempting to identify the main sources and impacts of these chemicals. A total of 135 CR samples and 12 other of alternative materials were analyzed, employing an ultrasound-assisted dispersive solid-phase extraction followed by gas chromatography-mass spectrometry (GC-MS), and the presence of VMSs was confirmed in all samples, in total concentrations ranging from 1.60 to 5089 ng.g-1. The levels were higher in commercial CR (before field application), a reflection of the use of VMS-containing additives in tire production and/or the degradation of silicone polymers employed in vehicles. The VMSs generally decreased over time on the turf, as expected given their volatile nature and the wearing of the material. Finally, the human exposure doses to VMSs in CR (by dermal absorption and ingestion) for people in contact with synthetic turf in football fields were negligible (maximum total exposure of 20.5 ng.kgBW-1.year-1) in comparison with the European Chemicals Agency (ECHA) reference doses: 1.35 × 109 ng.kgBW-1.year-1 for D4 and 1.83 × 109 ng.kgBW-1.year-1 for D5. Nevertheless, more knowledge on exposure through inhalation and the combined effects of all substances is necessary to provide further corroboration. This work proved the presence of VMSs in CR from ELTs, another family of chemical of concern to take into account when studying MPs as vectors of other contaminants.

Activated biochar derived from Enteromorpha with high specific surface area for efficient removal of phenanthrene: Experiments, mechanism and DFT calculations

Conversion of solid marine waste into innovative nanomaterials has been successfully developed for removing organic pollutants from aqueous solutions. In this study, activated biochar (HTST) was successfully synthesized using a straightforward three-step method involving pretreatment, carbonization, and chemical regulation. Multiple characterization techniques revealed the presence of abundant three-dimensional hierarchical porous structures in the samples, along with amorphous and active functional group structures such as -COOH, -OH, -NHR, -CC, and C-O. Notably, the prepared sample exhibited a remarkable specific surface area (SBET) of 3284.52 m2/g, which was close to 1700 times larger than that of the raw biomass. Additionally, the highest removal efficiency could reach approximately 100% under neutral condition, while the adsorption capacity even achieved up to 782.37 mg/g within 2 h at room temperature. Calculations simulation not only highlighted the significance of the π-π conjugation between sample and pollutant molecules, but deeply explored the bonding interaction of active functional groups on the surface, whereas adsorption energies of different configurations had the following order: ΔE(-NHR) = 0.75194674 eV > ΔE(-OH) = 0.72502369 > ΔE(-COOH) = 0.71488135 > ΔE(-CC-) = 0.53852269 eV. Moreover, the adsorption activities for the optimized configuration were further analyzed based on the LUMO-HOMO energy gap and electric distribution. This work presents a viable synthesis method for low-cost nanomaterials and offers new insights into the exceptional adsorption properties of advanced adsorbents for wastewater treatment.

Evaluation of sorbent amendments used with stormwater management practices to remove contaminants: Impacts of rainfall intensity and antecedent dry periods

For a comprehensive evaluation of the suitability and efficiency of soil amendments in bioretention systems, it is crucial to investigate the capability of amendments for simultaneously serving three important functions under intermittent and variable flow conditions: removing a wide range of contaminants, supporting plant health, and maintaining media infiltration rate. However, most studies have not considered these important factors and conditions simultaneously, which may overestimate or underestimate the bioretention performance. In this study, a long-term vegetated column study was conducted to investigate the ability of various sorbent amendments- coconut coir fiber (CCF), blast furnace slag (BFS), and waste tire crumb rubber (WTCR) -for removal of metals, nutrients, and polycyclic aromatic hydrocarbons (PAHs) from stormwater. The experiments were performed under intermittent flow conditions considering different runoff intensities and antecedent dry periods (ADP). The long-term effect of bioretention usage on plant health and media infiltration rate was also investigated. All amended and unamended columns were able to remove >99 % of influent metals, except Cu, over the 7-month experiment period with different rain intensities and dry periods; modest effluent Cu concentrations occurred with higher rainfall. The performance of different media for removing PAHs such as naphthalene and acenaphthylene varied with the rain intensity. The BFS-amended media had high phosphate removal capacity (>90 %) under tested conditions. In all columns, nitrate removal was notably affected by changes in stormwater intensity and ADP, with high nitrate removal during heavy rainfall. Over the entire experiment, all media had good infiltration rate within the locally acceptable range (1-25 cm/h). The high iron and aluminum contents of BFS adversely affected the plant health in BFS-amended media. Overall, this study identifies the opportunities and challenges associated with the usage of bioretention amendments, and improves awareness among bioretention designers to consider seasonal effect on the performance of bioretention systems.

Bioremediation of n-alkanes, polycyclic aromatic hydrocarbons, and heavy metals from wastewater using seaweeds

The removal of n-alkanes, polycyclic aromatic hydrocarbons, and heavy metals from wastewater using three dried seaweeds Ulva intestinalis Linnaeus (green alga), Sargassum latifolium (Turner) C.Agardh (brown alga), and Corallina officinalis Kützing (red alga) has been shown to evaluate their potential usage as inexpensive adsorbents. Under natural environmental conditions, numerous analytical methods, including zeta potential, energy dispersive X-ray spectroscopy (EDX), SEM, and FT-IR, are used in this study. The results showed that n-alkanes and polycyclic aromatic hydrocarbons adsorption increased with increasing contact time for all three selected algae, with a large removal observed after 15 days, while the optimal contact time for heavy metal removal was 3 h. S. latifolium dry biomass had more potential as bioadsorbent, followed by C. officinalis and then U. intestinalis. S. latifolium attained removal percentages of 65.14%, 72.50%, and 78.92% for light n-alkanes, heavy n-alkanes, and polycyclic aromatic hydrocarbons (PAHs), respectively, after 15 days. Furthermore, it achieved removal percentages of 94.14, 92.62, 89.54, 87.54, 82.76, 80.95, 77.78, 73.02, and 71.62% for Mg, Zn, Cu, Fe, Cr, Pb, Cd, Mn, and Ni, respectively, after 3 h. Carboxyl and hydroxyl from FTIR analysis took part in wastewater treatment. The zeta potentials revealed that algal cells have a negatively charged surface, and the cell surface of S. latifolium has a more negative surface charge than U. intestinalis and C. officinalis. Our study suggests that seaweeds could play an important role in wastewater treatment and thus help as an economical, effective, and ecofriendly bioremediation system for ecological health and life protection.

Analysis of polycyclic aromatic hydrocarbons (PAHs) and their derivatives in biochar treated stormwater

Polycyclic aromatic hydrocarbons (PAHs), oxygenated PAHs (oxy-PAHs) and nitrogen heterocyclic polycyclic aromatic compounds (N-PACs) are persistent and semi-volatile organic compounds primarily formed due to incomplete combustion of organic material or, in the case of the derivatives, through transformation reactions of PAHs. Their presence in the environment is ubiquitous and many of them have been proven carcinogenic, teratogenic, and mutagenic. These toxic pollutants can therefore pose a threat to both ecosystem and human health and urges for remediation strategies for PAHs and derivatives from water bodies. Biochar is a carbon-rich material resulting from the pyrolysis of biomass resulting in a very porous matter with high surface area for an enhanced interaction with chemicals. This makes biochar a promising alternative for filtering micropollutants from contaminated aquatic bodies. In this work, a previously developed and validated methodology for the analysis of PAHs, oxy-PAHs and N-PACs in surface water samples was adapted for its utilization in biochar treated stormwater with special emphasis on scaling down the solid-phase extraction as well as including an additional filtering step for the removal of particulate matter in the media.•Optimized extraction method for PAHs, oxy-PAHs and N-PACs from stormwater treated with biochar.•Biochar strongly impacts the stormwater matrix and, therefore, additional steps are required in the extraction methodology.•Solid-phase extraction combined with GC-MS have been used to analyse PAHs, oxy-PAHs and N-PACs in stormwater treated with biochar.

Benchmarking biochar with activated carbon for immobilizing leachable PAH and heterocyclic PAH in contaminated soils

Remediation of residually contaminated soils remains a widespread problem. Biochar can immobilize polycyclic aromatic hydrocarbons (PAH). However, studies on its ability to immobilize PAH and N, S, and O substituted PAH (hetero-PAH) in real soils, and benchmarking with commercial activated carbon are missing. Here, we compared the ability of pristine biochar (BC), steam-activated biochar (SABC), and commercial activated carbon (AC) to immobilize PAH and hetero-PAH. The three carbons were tested on soils from four different contaminated sites in Austria. Different amendment rates (w/w) of the carbons were investigated (BC: 1.0, 2.5, and 5%; SABC: 0.5, 1.0, and 2.0%; AC: 1%) in batch experiments to cover meaningful ranges in relation to their performance. SABC performed better than AC, removing at least 80% PAH with the lowest application rate of 0.5%, and achieving a complete removal at an application rate of 1.0%. BC performed slightly worse but still acceptable in residually contaminated soils (40 and 100% removal at 1 and 5% amendment, respectively). The ability of BC and SABC to immobilize PAH decreased as the PAH-molar volume increased. PAH with three or more rings were preferentially removed by AC compared to SABC or BC. This can be explained by the difference in pore size distribution of the carbons which could limit the accessibility of PAH and hetero-PAH to reach sorption sites for π- π electron donor-acceptor interactions, which drive PAH and hetero-PAH sorption to carbons. Column percolation tests confirmed the results obtained in batch tests, indicating, that decisions for soil remediation can be derived from simpler batch experiments. In soil samples with 1% BC, a reduction of over 90% in the total concentration of PAH in the leached water was observed. Overall, BC and SABC were demonstrated to be valid substitutes for AC for stabilizing residually contaminated soils.

Phenanthrene sorption studies on coffee waste- and diatomaceous earth-based adsorbents, and adsorbent regeneration with cold atmospheric plasma

Phenanthrene (PHE) is a polycyclic aromatic hydrocarbon categorized as a high priority organic pollutant being toxic for the ecosystem and human health, and its sorption on natural organic or inorganic substances seems a well-promising method for its removal from water streams. The goals of the present work are (i) to assess the capacity of low-cost adsorbents fabricated by treating coffee wastes and diatomaceous earth to remove PHE from water; (ii) to elucidate the role of the pore structure on PHE sorption dynamics; and (iii) to assess the potential to regenerate adsorbents loaded with PHE, by using the novel technology of cold atmospheric plasma (CAP). Diatomaceous earth (DE) and DE pre-treated with sodium hydroxide (NaOH) or phosphoric acid (H₃PO₄) were chosen as inorganic adsorbents. Coffee waste (CW) and activated carbons (AC) produced from its pyrolysis at 800 °C (CWAC), either untreated (CWAC-800) or pre-treated with NaOH (CWAC-NaOH-800) and H₃PO₄ (CWAC-H₃PO₄-800), were chosen as organic adsorbents. The adsorbents were characterized with nitrogen adsorption-desorption isotherms, attenuated total reflectance-Fourier transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, and mercury intrusion porosimetry. Based on the PHE sorption capacity and pore structure/surface characteristics, the CWAC-NaOH-800 was chosen as the most efficient adsorbent for further equilibrium and kinetic sorption studies. The multi-compartment model was used to describe the PHE sorption dynamics in CWAC-NaOH-800 by accounting for the pore/surface diffusion and instantaneous sorption. The CWAC-NaOH-800 exhibited remarkable values for (i) the specific surface area (S_BET = 676.5 m²/g) and meso- and micro-pore volume determined by nitrogen sorption (V_LN2 = 0.415 cm³/g); (ii) the macro- and meso-pore volume determined by mercury intrusion porosimetry (V_MIP = 3.134 cm³/g); and (iii) the maximum PHE sorption capacity (q_max = 142 mg/g). The percentage of adsorbent recovery after its regeneration with CAP was found to be ~ 35%. From the simulation of sorption dynamics, it was found that at early times, the sorption kinetics is governed by the film diffusion towards the external surface of grains, but at late times, most of the adsorbed mass is transferred primarily to meso-/macro-pores via diffusion, and secondarily to micro-porosity via surface diffusion. Based on the adsorbent characteristics, effect of pH on sorption efficiency, and numerical analysis of sorption dynamics, it was concluded that probably the dominant adsorption mechanism is the π-π interactions between hydrophobic PHE aromatic rings and CWAC-NaOH-800 graphene layers. The high PHE removal efficiency of CWAC-NaOH-800, the successful interpretation of sorption dynamics with the multi-compartment model, and the potential to regenerate PHE-loaded adsorbents with the green and economic technology of CAP motivate a strategy for testing CWACs towards the adsorption of other PAHs, application of adsorbents to real wastewaters, and scaling-up to pilot units.

Autochthonous bioaugmentation accelerates phenanthrene degradation in acclimated soil

Bioaugmentation helps to obtain a microbiome capable of remediating polycyclic aromatic hydrocarbons (PAHs). In this study, acclimation of microorganisms to soil supplemented with phenanthrene (PHE) led to enrichment with PAH-degraders, including those in Actinobacteriota and in the genera Streptomyces, Rhodococcus, Nocardioides, Sphingomonas, and Mycobacterium. Aqueous (28 °C, pH 6.5) and soil cultures inoculated with PHE-acclimated soil showed a high PHE (ca. 50 mg L^-1) degradation efficiency. The PHE degradation kinetics in aqueous and soil incubations fitted to the Gompertz equation and the first-order kinetic equation, respectively. Indigenous microorganisms adapted to PHE in their environment, and this increased their capacity to degrade PHE. The effect of co-contaminants and pathway intermediates on PHE degradation showed that the degradation of PHE improved in the presence of diesel while being hindered by lubricant oil, catechol, salicylic and phthalic acid. Our findings provide theoretical and practical support for bioremediationof PAHs in the environment.

Adsorption of aqueous Pb(II) using non-devulcanized and devulcanized tyre rubber powder: a comparative study

This study aimed to compare the adsorption of Pb(II) ions from an aqueous solution using non-devulcanized (NTR) and devulcanized tyre rubber (DTR) powder. Both types of rubber particles were prepared from used truck tyres, with DTR processed through mechano-chemical devulcanization. The adsorption experiments were conducted using 100-200 µm particles, with adsorbent doses ranging from 5 to 15 g/L. Effects of adsorbent dose, initial metal concentration and contact time were investigated. Characterization of both adsorbents was done using SEM-EDS, FTIR, and XRD analysis. Different adsorption isotherm and kinetic models were used to analyse the adsorption mechanisms. The results of the study showed that DTR was significantly more efficient at adsorbing Pb(II) compared to NTR. The maximum adsorption capacities estimated from the Langmuir equation were 75.1 mg/g and 6.61 mg/g for DTR and NTR, respectively. Among the kinetic models tested, pseudo 2nd order kinetic model was found to be the most suitable for tyre rubber adsorbents. The optimal dose and contact time were found to be 5 g/L and 120 min, respectively, for both adsorbents. The superior performance of DTR in Pb(II) adsorption was attributed to the change in the surface morphology of the rubber during the devulcanization process, resulting in increased surface roughness. The adsorption of Pb(II) was accompanied by the leaching of Zn from both types of rubber, suggesting that an ion exchange mechanism might be involved in the adsorption process. In conclusion, devulcanization appears to be a viable method for improving the adsorption properties of tyre rubber.

Improving chitosan performance in the simultaneous adsorption of multiple polycyclic aromatic hydrocarbons by oligo(β-pinene) incorporation

The occurrence of persistent organic pollutants in aquatic bodies, namely polycyclic aromatic hydrocarbons (PAHs), has been increasingly detected. The presence of such contaminants represents a serious threat to human health due to their toxicity. Therefore, aiming to provide a novel and efficient alternative for PAHs' removal from water, the present study assesses the effect of oligo(β-pinene) blended with chitosan for the adsorption of these pollutants. Oligo(β-pinene) with phenyl end-groups was synthesized by organocatalyzed atom transfer radical polymerization (O-ATRP) and incorporated in different concentrations (6, 12, and 18 %) to chitosan films. The oligo(β-pinene) loading in the chitosan matrix impressively improved this polysaccharide adsorption capacity. The formulation containing 12 % of oligomer demonstrated a contaminant removal performance three times higher (298.82 %) than pure chitosan during only 1 h of the decontamination process. Adsorption isotherms showed an improved uptake of PAHs with the increase of the contaminants' concentration in the aqueous media due to the formation of a higher concentration gradient. Additionally, a comprehensive characterization of oligo(β-pinene)/chitosan formulation was performed to provide a better understanding of the interactions between the components of the blends. Overall, it was concluded that oligo(β-pinene)/chitosan blends can be used as a high-performance and sustainable alternative for PAHs removal.

Removal, migration, and distribution of naphthalene in bioretention facilities: the influences of particulate matter

Particulate matter (PM), as an important carrier of carrying and transporting runoff pollutants, can significantly affect the behavior and removal efficiency of pollutants in bioretention facilities. In order to control the pollution caused by naphthalene in bioretention facilities, the removal efficiency and migration characteristics of naphthalene were systematically investigated under the influences of PM. The results showed that the removal efficiency of naphthalene was 74 ~ 97% in bioretention facilities under the influences of PM. With the higher concentration, the lower rainfall return period, and the longer antecedent drying period, the removal efficiency of naphthalene in each medium layer were higher. Furthermore, the PM could increase the naphthalene adsorption capacity onto medium in the first 10 cm depth, which showed more than 80% removal efficiency and lower mobility of naphthalene. The removal efficiency of naphthalene was significantly higher (90 ~ 97%), when the particle size and concentration of PM were 0 ~ 45 μm and 500 mg/L, respectively. This study investigated the important role of PM for naphthalene removal in bioretention facilities, and provided effective guidelines for runoff pollution control, design of stormwater facilities, and assessment risk of naphthalene.

The chromosome-level genome and key genes associated with mud-dwelling behavior and adaptations of hypoxia and noxious environments in loach (Misgurnus anguillicaudatus)

BACKGROUND

The loach (Misgurnus anguillicaudatus), the most widely distributed species of the family Cobitidae, displays a mud-dwelling behavior and intestinal air-breathing, inhabiting the muddy bottom of extensive freshwater habitats. However, lack of high-quality reference genome seriously limits the interpretation of the genetic basis of specialized adaptations of the loach to the adverse environments including but not limited to the extreme water temperature, hypoxic and noxious mud environment.

RESULTS

This study generated a 1.10-Gb high-quality, chromosome-anchored genome assembly, with a contig N50 of 3.83 Mb. Multiple comparative genomic analyses found that proto-oncogene c-Fos (fos), a regulator of bone development, is positively selected in loach. Knockout of fos (ID: Mis0086400.1) led to severe osteopetrosis and movement difficulties, combined with the comparison results of bone mineral density, supporting the hypothesis that fos is associated with loach mud-dwelling behavior. Based on genomic and transcriptomic analysis, we identified two key elements involved in the intestinal air-breathing of loach: a novel gene (ID: mis0158000.1) and heat shock protein beta-1 (hspb1). The flavin-containing monooxygenase 5 (fmo5) genes, central to xenobiotic metabolism, undergone expansion in loach and were identified as differentially expressed genes in a drug stress trial. A fmo5^-/- (ID: Mis0185930.1) loach displayed liver and intestine injury, indicating the importance of this gene to the adaptation of the loach to the noxious mud.

CONCLUSIONS

Our work provides valuable insights into the genetic basis of biological adaptation to adverse environments.

Biochar and fungi as bioretention amendments for bacteria and PAH removal from stormwater

Bioretention has been widely used to mitigate hydrologic impacts of stormwater runoff and is increasingly being relied upon to treat chemical and biological pollutants transported by stormwater. Despite this reliance, we still lack an understanding of treatment performance for certain organic and biological contaminants which may interact with biotic and abiotic components of bioretention systems. We evaluated the treatment of fecal indicator bacteria (FIB) and polycyclic aromatic hydrocarbons (PAHs) in stormwater runoff by bioretention. We compared treatment performance by Washington's standard bioretention mix of 60% sand: 40% compost (by volume), and by three other mixtures amended with biochar, fungi (Stropharia rugosoannulata), or both. All bioretention columns were conditioned with clean water and then dosed with collected roadway runoff at a rate equivalent to a 6 month, 24 h storm in this region during 8 events over a 14-month period. Effluents for each column were analyzed for 23 PAHs, Escherichia coli, fecal coliform, dissolved organic carbon (DOC), and total suspended solids (TSS). The fate and transport of PAHs within the bioretention columns was tracked by measuring soil PAHs in media cores taken from the columns. ΣPAH were almost completely removed by all treatments across all storms, with removal rates ranging from 97 to 100% for 94 out of 96 samples. Compost appeared to be a source of PAHs in bioretention media, as biochar-amended media initially contained half the ΣPAHs as treatments with the standard 60:40 sand:compost mixture. We observed a net loss of ΣPAHs (19-73%) in bioretention media across the study, which could not be explained by PAHs in the effluent, suggesting that bioremediation by microbes and/or plants attenuated media PAHs. E. coli and fecal coliform were exported in the first dosing event, but all columns achieved some treatment in subsequent dosing events. Overall, these findings suggest that PAHs in stormwater can be remediated with bioretention, are unlikely to accumulate in bioretention media, and that biochar amendments can improve the treatment of E. coli.

Bioretention soil capacity for removing nutrients, metals, and polycyclic aromatic hydrocarbons; roles of co-contaminants, pH, salinity and dissolved organic carbon

Conventional bioretention soil media (BSM: e.g., loamy sand) is employed in infiltration-based stormwater management practices, but concerns exist on its limited sorption capacity. However, limited quantitative data is available, particularly considering the wide range of contaminants and water quality conditions that occur in stormwater. This study utilized batch tests to investigate the capability of conventional BSM for simultaneous removal of three nutrients (ammonium, nitrate, and phosphate), six metals (Cd, Cr, Cu, Ni, Pb and Zn), and four polycyclic aromatic hydrocarbons (PAHs: naphthalene, acenaphthylene, phenanthrene, and pyrene) from synthetic stormwater. Moreover, the effects of co-contaminants and different stormwater chemistry parameters (pH, salinity, and dissolved organic carbon (DOC)) on BSM sorption capacity were investigated. BSM was not effective for nutrients removal; however, it had good removal efficiency for metals such as Cu, Pb, and Cr which are less soluble at neutral pH values compared to metals such as Ni, Cd and Zn. Moreover, BSM was effective for removing PAHs with higher hydrophobicity such as pyrene and phenanthrene. Metals sorption capacity of BSM was greater at higher pH, lower salinity and DOC; however, the sorption capacity of BSM for PAHs was not sensitive to stormwater chemistry parameters. However, competitive sorption had a notable effect on low molecular weight PAHs, Cd, and Ni. This study provides a quantitative evaluation of the BSM performance and compares the sorption capacity to potential sorptive amendments used in stormwater management. While select sorbent amendments out-performed the BSM, this was not universal and was contaminant specific; careful consideration of water quality enhancement goals and solution chemistry are required in selecting a sorbent. Overall, this study identifies the possible limitations in BSM compositions and factors that may adversely affect BSM sorption capacity, and finally describes options to enhance BSM performance and recommendations for future research.

Biochar for the removal of contaminants from soil and water: a review

Biochar shows significant potential to serve as a globally applicable material to remediate water and soil owing to the extensive availability of feedstocks and conducive physio-chemical surface characteristics. This review aims to highlight biochar production technologies, characteristics of biochar, and the latest advancements in immobilizing and eliminating heavy metal ions and organic pollutants in soil and water. Pyrolysis temperature, heat transfer rate, residence time, and type of feedstock are critical influential parameters. Biochar’s efficacy in managing contaminants relies on the pore size distribution, surface groups, and ion-exchange capacity. The molecular composition and physical architecture of biochar may be crucial when practically applied to water and soil. In general, biochar produced at relatively high pyrolysis temperatures can effectively manage organic pollutants via increasing surface area, hydrophobicity and microporosity. Biochar generated at lower temperatures is deemed to be more suitable for removing polar organic and inorganic pollutants through oxygen-containing functional groups, precipitation and electrostatic attraction. This review also presents the existing obstacles and future research direction related to biochar-based materials in immobilizing organic contaminants and heavy metal ions in effluents and soil.

Graphical Abstract

Facile one-step preparation of Co and Ce doped TiO2 in visible light PMS activation for PAHs degradation

In this work, Co and Ce doped TiO₂ (CoCeTi) with low content of Co and Ce was successfully prepared by a facile one-step sol-gel solvothermal process for activating Peroxymonosulfate (PMS) to degrade Polycyclic aromatic hydrocarbons (PAHs). The phenanthrene degradation rate was 98.2% effectively in 15 min by CoCeTi (50.0 mg/L) activation PMS (0.50 mmol/L) under visible light. SO₄^•-, O₂^•-, h⁺ and ¹O₂ were verified as the dominant reactive species for PAHs degradation. The collective effect of CoCeTi, PMS and visible light irradiation has been discussed. The possible phenanthrene degradation pathway was proposed through intermediates analysis. CoCeTi composed of Co₃O₄, CeO₂ and TiO₂ was confirmed. Outstandingly, CoCeTi/PMS/visible light system has very low cobalt (0.036 mg/L) and cerium (0.27 mg/L) leaching. Due to CoCeTi having good activated PMS properties and other excellent characteristics, it has potential application for PAHs or other organic pollutants degradation.

The simultaneous removal of co-contaminants pyrene and Cu (II) from aqueous solutions by Fe/Mn bimetallic functionalized mesoporous silica

In recent years, the co-contamination of heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) has attracted more and more attention, and finding efficient and coordinated removal method has been the hot focus. In this study, Fe/Mn-SBA15 bimetallic mesoporous silica adsorbent (Fe/Mn-SBA15) was prepared by hydrothermal method with the functional groups Fe and Mn simultaneously doped into the framework structure of SBA15. Fe/Mn-SBA15 was systematically characterized by XRD, TEM, and BET and used in removal of typical PAHs-pyrene and heavy metal-Cu (II) from aqueous solutions simultaneously. The single and binary adsorption behaviors were studied by kinetics, isotherm, pH, and ionic strength. The results showed that the functional groups of Fe and Mn were successfully loaded into the structure of SBA15 and the prepared adsorbent was still a typical mesoporous adsorbent. The adsorption of pyrene and Cu (II) onto Fe/Mn-SBA15 was fast and the adsorption equilibrium was achieved in 100 min. The Langmuir model fitted the adsorption isotherm better and the maximum adsorption capacities for pyrene and Cu (II) were 120 mg/g and 10.52 mg/g, respectively. The increase of ionic strength could enhance and decrease the adsorption capacity of pyrene and Cu (II), which may be attributed to salting-out effect and potassium competitive. With the increase of pH values, the negative charge on the surface of the adsorbent increased, resulting in the decrease and increase of adsorption capacity of pyrene and Cu (II) onto Fe/Mn-SBA15. In addition, Fe/Mn-SBA15 was found to have a synergistic effect on the adsorption of pyrene and Cu (II). This result is mainly due to the formation of hydration complex by pyrene-Cu (II) through cation-π interaction, which increases the adsorption capacity by occupying each other's adsorption sites of adsorbent. This study provides a new method for the synergistic removal of PAHs and HMs from aqueous solutions.

Ground tire rubber functionalization as a promising approach for the production of sustainable adsorbents of environmental pollutants

Waste tires management and further utilization are currently one of the biggest concerns regarding the environment and human health protection. At present, shredding, grinding, or pulverization of waste tires are the most popular options for industrial recycling. Although many solutions for ground tire rubber (GTR) applications were checked and verified so far, their further implementation at an industrial scale is still very limited. In this brief review work, ground tire rubber functionalization strategies as a promising approach for the production of sustainable adsorbents of environmental pollutants were presented and discussed. Our findings indicate that suitable functionalization of GTR significantly improves adsorption capacity or selectivity of prepared GTR-based adsorbents. However, it should be mentioned that most of the performed research based on multi-step and time-consuming protocols of GTR functionalization is performed usually in the presence of solvents, which results in very low efficiency and as a consequence high-cost and limited applications. Current research trends showed that reactive extrusion can be considered as efficient, solvent-free, and pro-ecological alternative for commonly investigated periodic methods of GTR functionalization. This work shows that reactive extrusion is a promising method for further development of GTR-based adsorbents dedicated to environmental pollutants.

Structural characteristics of sediment humins from South Korean lakes and their phenanthrene binding compared to other carbon sources

Sediment humins are extremely important for binding hydrophobic organic contaminants in rivers and lakes. Nonetheless, little is known about their structure and binding. We, therefore, examined the structure and phenanthrene sorption affinity of sediment humin samples upstream, midstream, and downstream from two artificial lakes in South Korea by using the elemental ¹³C-NMR analysis, Freundlich model, and Langmuir model. The characteristics and phenanthrene sorption affinity of sediment humins were also compared with those of sediment humic acids from similar origins as well as soil humins/humic acids in South Korea from previous studies by using principal component analysis. In both lakes, downstream sediment humins exhibited lower N/C, O/C, and (N + O)/C ratios, lower internal oxidation, and higher aliphaticity due to the presence of long-chain aliphatic compounds generated during anaerobic decomposition. The principal component analysis results also showed that C,H-alkyl, O-alkyl, and polar organic carbon contents were significantly different when comparing the up-mid stream and downstream sediment samples in Daecheong Lake. In addition, midstream sediment humin in Andong Lake presented higher C,H-alkyl and lower polar organic carbon contents compared to those of up-downstream samples. In both lakes, the sorption coefficient and adsorption isotherm linearity were positively correlated with the C,H-alkyl content and negatively correlated with the O-aryl content. Similar to C,H-alkyl and POC, C,H-alkyl, and (N + O)/C had an extremely high correlation coefficient when predicting the sorption coefficient (Freundlich model) and the maximum adsorption capacity (Langmuir model) of sediment humins. Sediment humins had higher C,H-alkyl contents and lower sorption coefficients than those of sediment humic acids and soil humins/humic acids. These findings provide key information for monitoring water quality and polycyclic aromatic hydrocarbon contamination in South Korean lake sediments.

Environmental Consequences of Rubber Crumb Application: Soil and Water Pollution

End-of-life tires are utilized for various purposes, including sports pitches and playground surfaces. However, several substances used at the manufacture of tires can be a source of concerns related to human health or environment’s adverse effects. In this context, it is necessary to map whether this approach has the desired effect in a broader relation. While the negative effects on human health were investigated thoroughly and legislation is currently being revisited, the impact on aquatic or soil organisms has not been sufficiently studied. The present study deals with the exposure of freshwater and soil organisms to rubber crumb using the analysis of heavy metal and polycyclic aromatic hydrocarbon concentrations. The obtained results refer to substantial concerns related to freshwater contamination specifically, since the increased concentrations of zinc (7 mg·L⁻¹) and polycyclic aromatic hydrocarbons (58 mg·kg⁻¹) inhibit the growth of freshwater organisms, Desmodesmus subspicatus, and Lemna minor in particular. The performed test with soil organisms points to substantial concerns associated with the mortality of earthworms as well. The acquired knowledge can be perceived as a roadmap to a consistent approach in the implementation of the circular economy, which brings with it a number of so far insufficiently described problems.

Adsorption mechanism of polycyclic aromatic hydrocarbons using wood waste-derived biochar

The polycyclic aromatic hydrocarbons (PAHs) have been attracted increasing attentions due to their carcinogenicity and teratogenicity. Adsorption is widely considered one of the most potential technologies for PAHs removal. In this study, we prepared two kinds of oxygen-rich biochar derived from waste wood to investigate the PAHs adsorption performance, and the molecular simulation was used to build the 16 priority PAHs, 23 nitrated PAHs, 9 oxygenated PAHs adsorption model. The surface adsorption performance of oxygen-rich biochar significantly depends on the pyrolysis conditions. The main out-comings demonstrated that the adsorption of naphthalene (C₁₀H₈) molecules first occurred, and the optimal adsorption positions of oxygen-rich biochar strongly adhered to functional groups of carboxyl and hydroxyl. Moreover, benzene ring, -COOH, and -CH₃ of biochar were the main adsorbed functional groups for PAHs adsorption. The oxygen-rich biochar had the targeted-adsorption effect on PAHs removal especially symmetrical PAHs, and the targeted-adsorption mechanism was finally proposed. The research is beneficial to guide the removal of PAHs from polluted water and mitigate the environmental pollution caused by biomass waste mismanagement, simultaneously.

Competitive sorption of Cd, Cr, Cu, Ni, Pb and Zn from stormwater runoff by five low-cost sorbents; Effects of co-contaminants, humic acid, salinity and pH

For a comprehensive estimation of metals removal by sorbents in stormwater systems, it is essential to evaluate the impacts of co-contaminants. However, most studies consider only metals (single or multiple), which may overestimate performance. This study employed a batch method to investigate the performance of five low-cost sorbents - coconut coir fiber (CCF), blast furnace slag (BFS), waste tire crumb rubber (WTCR), biochar (BC), and iron coated biochar (FeBC) - for simultaneous removal of Cd, Cr, Cu, Ni, Pb and Zn from simulated stormwater (SSW) containing other contaminants (nutrients and polycyclic aromatic hydrocarbons). BFS and CCF demonstrated the highest sorption capacity of all metals (> 95% removal) in all systems (single and multi-contaminant). However, the presence of other contaminants in solution reduced metals removal for other sorbents, as follows (highest to lowest removal): single-metal > multi-metal > multi-contaminant solutions, and removal efficiency ranking among metals was generally Cr~Cu~Pb > Ni > Cd > Zn. Humic acid (HA) negatively affected the metal sorption, likely due to the formation of soluble HA-metal complexes; NaCl concentration did not impact removal, but alkaline pH improved removal. These findings indicate that sorbents need to be tested under realistic stormwater solution chemistry including co-contaminants to appropriately characterize performance prior to implementation.

Biochar-based bioretention systems for removal of chemical and microbial pollutants from stormwater: A critical review

Biochar has been increasingly used as a filter medium in engineered low impact development systems (e.g., bioretention systems) for decontamination of urban stormwater and management of hydrology. This review paper critically analyzes the performance of biochar-based biofiltration systems for removal of chemical and microbial pollutants present in urban runoff. Biochar-amended biofiltration systems efficiently remove diverse pollutants such as total nitrogen (32 - 61%), total phosphorus: (45 - 94%), heavy metals (27 - 100%), organics (54 - 100%) and microbial pollutants (log₁₀ removal: 0.78 - 4.23) from urban runoff. The variation of biofiltration performance is due to changes in biochar characteristics, the abundance of dissolved organic matter and/or stormwater chemistry. The dominant mechanisms responsible for removal of chemical pollutants are sorption, ion exchange and/or biotransformation, whereas filtration/straining is the major mechanism for bacteria removal. The pseudo-second order and Langmuir isotherm are the best models that describe the kinetics and chemical equilibrium of pollutants, respectively. This critical review provides the fundamental scientific knowledge for designing highly efficient biochar-based bioretention systems for removal of diverse pollutants from urban stormwater. The key knowledge gaps that should be addressed in future research include long-term field-scale bioretention study, development of novel methods for filter media regeneration/reuse, and dynamics of filter media microbial communities.

Impact of pyrene (polycyclic aromatic hydrocarbons) pollutant on metabolites and lipid induction in microalgae Chlorella sorokiniana (UUIND6) to produce renewable biodiesel

Pyrene (polycyclic aromatic hydrocarbon), an anthropogenic organic pollutant prevalent in various ecological units, receives more attention for bioremediation and energy transformation using microalgae. In this study, we have used pyrene pollutant (50-500 ppm) to evaluate the half-maximal inhibitory concentrations (IC₅₀) of Chlorella sorokiniana and the impact on metabolites as well as the induction of lipid biosynthesis to produce renewable biodiesel. Pyrene concentration at 230 ppm (IC₅₀) caused half-maximum inhibition for the 96 h incubation. The harvest in the stationary stage (day 16) for C. sorokiniana revealed a biomass generation of 449 ± 7 mg L^-1 and 444 ± 8 mg L^-1 dcw in the control medium and pyrene IC₅₀ medium, respectively. An insignificant decline in biomass generation (1.2%) was observed due to the stress effect of the pyrene IC₅₀ medium on metabolic biosynthesis. Although contrary to biomass generation, IC₅₀ of pyrene assisted to induce lipid biosynthesis in C. sorokiniana. The improvement in lipid biosynthesis was observed as ~24% higher in pyrene IC₅₀ compared to the control medium. The chemical composition of the microalgae biomass, metabolites, and lipids was examined using FTIR spectra. The extracted lipid was transesterified to produce biodiesel via methanolic-H₂SO₄ catalysis. The renewable biodiesel obtained was evaluated using FTIR and ¹H NMR spectra. The transformation efficiency of the lipid of C. sorokiniana in biodiesel was calculated as ~81%. This research offers the incentive in lipid biosynthesis in microalgae cells using pyrene for the production of renewable and sustainable ecological biofuels along with bioremediation of pyrene.

Copper and Zinc Removal Efficiency of Two Reactive Filter Media Treating Motorway Runoff—Model for Service Life Estimation

The predominant techniques used for road runoff treatment are sedimentation and filtration. In filtration systems, the ability of the media to adsorb the contaminants is a finite process. Consequently, construction, operation and maintenance managers of such systems should know in advance the service life, i.e., when the used medium should be replaced, and associated costs of operation and maintenance. A batch experiment followed by a packed bed reactor (PBR) experiment addressed the kinetics of the studied media argon oxygen decarburization slag (AOD) and Polonite, followed by the development of a 1D-model to describe the change of concentration of Cu and Zn within time. The batch test results showed that Cu and Zn adsorption followed the Freundlich isotherms for AOD and Polonite. Those results coupled with the linear driving force model and the developed model resulted in good agreement between the PBR results and the simulation. The model was capable to predict (i), the service life at the hydraulic load of 0.18 m/h for AOD (Cu: 395 d; Zn: 479 d) and Polonite (Cu: 445 d; Zn: 910 d), to show (ii) the profile concentration in the PBR within time and the gradient of the concentration along the height of the reactor.

Advanced materials for immobilization of purple phototrophic bacteria in bioremediation of oil-polluted wastewater

Oil pollution which results from industrial activities, especially oil and gas industry, has become a serious issue. Cinder beats (CB), coconut fiber (CF) and polyurethane foam (PUF) are promising immobilization carriers for crude oil biodegradation because they are inexpensive, nontoxic, and non-polluting. The present investigation was aimed to evaluate this advanced technology and compare the efficiency of these immobilization carriers on supporting purple phototrophic bacterial (PPB) strains in hydrocarbon biodegradation of crude oil contaminated seawater. The surface of these biocarriers was supplemented with crude oil polluted seawater and immobilized by PPB strains, Rhodopseudomonas sp. DD4, DQ41 and FO2. Through scanning electron microscopy (SEM), the bacterial cells were shown to colonize and attach strongly to these biocarriers. The bacteria-driven carrier systems degraded over 84.2% supplemented single polycyclic aromatic hydrocarbons (PAHs). The aliphatic and aromatic components in crude oil that treated with carrier-immobilized consortia were degraded remarkably after 14 day-incubation. Among the three biocarriers, removal of the crude oil by CF-bacteria system was the highest (nearly 100%), followed by PUF-bacteria (89.5%) and CB-bacteria (86.3%) with the initial crude oil concentration was 20 g/L. Efficiency of crude oil removal by CB-bacteria and PUF-bacteria were 86.3 and 89.5%, respectively. Till now, the studies on crude oil degradation by mixture species biofilms formed by PPB on different carriers are limited. The present study showed that the biocarriers of an oil-degrading consortium could be made up of waste materials that are cheap and eco-friendly as well as augment the biodegradation of oil-contaminated seawater.