Degradation effect of ultraviolet-induced advanced oxidation of chlorine, chlorine dioxide, and hydrogen peroxide and its impact on coagulation of extracellular organic matter produced by Microcystis aeruginosa

Advanced oxidation processes for synchronizing harmful microcystis blooms control with algal metabolites removal: From the laboratory to practical applications

Harmful algal blooms (HABs) in freshwater systems have become a global epidemic, leading to a series of problems related to cyanobacterial outbreaks and toxicity. Studies are needed to improve the technology used for the simultaneous removal of harmful cyanobacteria and algal metabolites. In this review, widely reported advanced oxidation processes (AOPs) strategies for removing major species Microcystis aeruginosa (M. aeruginosa) and microcystins (MCs) were screened through bibliometrics, such as photocatalysis, activated persulfate, H2O2, Ozone oxidation, ultrasonic oxidation, and electrochemical oxidation, etc. AOPs generate kinds of reactive oxygen species (ROS) to inactivate cyanobacteria and degrade cyanotoxins. A series of responses occurs in algal cells to resist the damaging effects of ROS generated by AOPs. Specifically, we reviewed laboratory research, mechanisms, practical applications, and challenges of HABs treatments in AOPs. Problems common to these technologies include the impact of algal response and metabolites, and environmental factors. This information provides guidance for future research on the removal of harmful cyanobacteria and treatment of algal metabolites using AOPs.

Process analysis of microplastic aging during the photochemical oxidation process and its effect on the adsorption behavior of dissolved organic matter

Information on microplastics (MPs) interactions with dissolved organic matter (DOM) is essential for understanding their environmental impacts. However, research is scarce regarding the adsorption behavior of DOM with different characteristics onto pristine and aged MPs. This research thus investigates MPs aging behavior accelerated by UV/Persulfate and UV/chlorine oxidation processes and the adsorption behavior of organic matter with low-specific ultraviolet absorbance (L-SUVA) and high-SUVA (H-SUVA) characteristics. MPs were degraded by UV/Cl and UV/Persulfate for 30 days. Changes in thermal properties, surface morphology, and chemistry were studied using different analytical techniques. The adsorption behavior was assessed by adsorption kinetic and isotherm study. After oxidation, the surface of the MPs showed a significant increase in the oxygen-containing functional groups, contact angle, surface roughness, and surface energy, and a decrease in crystallinity. The oxidation effect follows the order of UV/Cl > UV/Persulfate. The kinetic and equilibrium data of H-SUVA adsorption on pristine and aged MPs well-fitted the pseudo-second-order and Langmuir model. In contrast, L-SUVA well-fitted the pseudo-first-order and Freundlich model. The adsorption capacity (qm) increased in the following orders: 8.11 > 5.87>4.29 mg g-1 for H-SUVA and 19.81 > 6.662>5.315 mg g-1 for L-SUVA by MPs aged with UV/Cl, UV/Persulfate and pristine MPs, respectively. The larger the surface damage of MPs, the greater the adsorption affinity of DOM. The result was attributed to the physical adsorption process, hydrophobic interactions, electrostatic, hydrogen, and halogen bonding. These findings are beneficial to provide new insights involving the adsorption behavior and interaction mechanisms of DOM onto MPs for the environmental risk assessment.

Facile one-step preparation of Co and Ce doped TiO2 in visible light PMS activation for PAHs degradation

In this work, Co and Ce doped TiO₂ (CoCeTi) with low content of Co and Ce was successfully prepared by a facile one-step sol-gel solvothermal process for activating Peroxymonosulfate (PMS) to degrade Polycyclic aromatic hydrocarbons (PAHs). The phenanthrene degradation rate was 98.2% effectively in 15 min by CoCeTi (50.0 mg/L) activation PMS (0.50 mmol/L) under visible light. SO₄^•-, O₂^•-, h⁺ and ¹O₂ were verified as the dominant reactive species for PAHs degradation. The collective effect of CoCeTi, PMS and visible light irradiation has been discussed. The possible phenanthrene degradation pathway was proposed through intermediates analysis. CoCeTi composed of Co₃O₄, CeO₂ and TiO₂ was confirmed. Outstandingly, CoCeTi/PMS/visible light system has very low cobalt (0.036 mg/L) and cerium (0.27 mg/L) leaching. Due to CoCeTi having good activated PMS properties and other excellent characteristics, it has potential application for PAHs or other organic pollutants degradation.

Low-energy high-rate flotation technology for reduction of organic matter and disinfection by-products formation potential: A pilot-scale study

Despite operating complexity and high energy costs associated with its operation and maintenance, dissolved air flotation (DAF) is widely used in drinking water treatment processes. Recently, the focus has shifted to designing and developing DAF with high surface loading rates. This research compares the performance of pilot-scale high-rate DAF and low-energy high-rate flash-pressurized flotation (FPF) based on the removal behavior of natural organic matter, different molecular weight size fractions, and the formation potential of disinfection by-products. For a surface-loading rate of 30 m/h, the residual dissolved organic matter (DOC) concentrations in treated samples from high-rate DAF and FPF were 1.35 ± 0.02 (30.25 ± 0.15% removal) mg/L and 1.37 ± 0.03 (29.12 ± 1.72% removal) mg/L, respectively. In contrast, the removal of high-molecular-weight fractions, i.e., biopolymers and humic substances, showed similar removal performance for both treatment processes but not for building blocks. The removal rates were 27.10% and 6.64% for high-rate DAF and FPF, respectively. The formation potential of trihalomethanes/DOC for high-rate DAF with reaction times of 1, 3, 6, and 9 days 14.12 ± 0.18, 17.84 ± 0.22, 23.04 ± 0.29, and 29.73 ± 0.37 μg/mg C, respectively, and 16.83 ± 0.34, 22.69 ± 0.46, 27.08 ± 0.55, and 28.54 ± 0.58 for high-rate FPF. In the case of haloacetonitriles/dissolved organic nitrogen-humic substances and chloral hydrate/DOC, there were no significant differences. Thus, low-energy high-rate FPF with a reduction of energy of 55% provides an alternative to high-rate DAF.

Combined Effect of NZVI and H2O2 on the Cyanobacterium Microcystis aeruginosa: Performance and Mechanism

In order to eliminate the harmful cyanobacterium Microcystis aeruginosa and the algal organic matters (AOMs) produced by M. aeruginosa, the combined process of nanoscale zero-valent iron (NZVI) and hydrogen peroxide (H₂O₂) has been carried out, and the removal mechanism has also been clarified. As the initial cyanobacterial cell concentration is 1.0 (±0.05) × 10⁵ cells·mL^-1, all the treatments of NZVI, H₂O₂, and NZVI/H₂O₂ have inhibition effects on both the Chl a contents and photosynthetic pigments, with the Chl a removal efficiency of 47.3%, 80.5%, and 90.7% on the 5th day, respectively; moreover, the variation of ζ potential is proportional to that of the Chl a removal efficiency. The malondialdehyde content and superoxide dismutase activity are firstly increased and ultimately decreased to mitigate the oxidative stress under all the treatments. Compared with NZVI treatment alone, the oxidation of the H₂O₂ and NZVI/H₂O₂ processes can effectively destroy the antioxidant enzyme system and then inactivate the cyanobacterial cells, which further leads to the release of photosynthetic pigments and intracellular organic matters (IOM); in addition, the IOM removal efficiency (in terms of TOC) is 61.3% and 54.1% for the H₂O₂ and NZVI/H₂O₂ processes, respectively. Although NZVI is much more effective for extracellular organic matters (EOM) removal, it is less effective for IOM removal. The results of the three-dimensional EEM fluorescence spectra analysis further confirm that both H₂O₂ and NZVI/H₂O₂ have the ability to remove fluorescent substances from EOM and IOM, due to the oxidation mechanism; while NZVI has no removal effect for the fluorescent substances from EOM, it can remove part of fluorescent substances from IOM due to the agglomeration. All the results demonstrate that the NZVI/H₂O₂ process is a highly effective and applicable technology for the removal of M. aeruginosa and AOMs.

Study on the operation performance and floc adhesion mechanism of dissolved air flotation equipment

As a critical air dissolving system, the performance of air flotation equipment directly determines the adhesion efficiency and pollutant removal efficiency of air flotation processes. The factors affecting the performance of air flotation equipment and the relationships between equipment performance and pollution removal efficiency were studied. The results show that when the dissolved gas pressure was 0.4 MPa and the air intake rate was 24 mL/min, the dissolved gas efficiency of the equipment reached its highest value of 55%, the average particle size of bubbles was maintained at 24 µm, and the dissolved oxygen (DO) content significantly increased. When the dissolved gas pressure was 0.4 MPa, the air intake rate was 24 mL/min, and the coagulant dose was 6 mg/L; the removal rates for turbidity, chlorophyll-a, total organic carbon (TOC), and UV absorbance at 254 nm (UV₂₅₄) reached 95.76%, 96.41%, 34.21%, and 65.96%, respectively. The degree of pollutant removal was positively correlated with changes to the equipment performance parameters. Microbubbles (MBs) showed good removal of high-molecular weight, strongly hydrophobic organic matter and showed some removal of the trihalomethane formation potential (THMFP) of the water. The removal mechanism mainly depended on the hydrophobic interactions of the MBs with algae and organic matter. The flocs and MBs collided and adhered to form air-entrained flocs. The separation of air-entrained flocs depended on the relationship between the surface load and the rising velocity. The surface load has to be lower than the rising velocity of the minimum air-entrained flocs to ensure good effluent outcomes.

Challenges in Environmental Science/Engineering and fate and innovative treatment/remediation of emerging pollutants

Solid waste Management: There are two articles in this section. Shi et al. (2021) investigated the unbalanced status and multidimensional influences of municipal solid waste management in Africa. It was identified that economic growth, urbanization and geographical location are the most critical factors influencing the unbalanced statue of MSW management in Africa.

Effect of Al hydrates on minimization of disinfection-by-products precursors by coagulation with intensified pre-oxidation towards cyanobacteria-laden water

Pre-oxidation is warranted to improve cyanobacteria removal and minimize disinfection by-products (DBPs) precursors for subsequent coagulation with polyaluminum chloride (PACl) in drinking water treatment. However, the reduction in DBP precursors strongly depends on the Al hydrates for PACl coagulation. This study aimed to investigate the effects of intensified NaOCl and ClO₂ pre-oxidation on the removal of Microcystis aeruginosa (MA) and the corresponding halogenated DBP precursors by PACl coagulation with different Al hydrates. Two PACl coagulants, namely PACl-W with 51% monomeric Al and PACl-H with 71% polymeric Al, were used for FlocCAM jar test. The results have shown that the reductions in MA cell and algogenic organic matter (AOM) are more pronounced by sweep flocculation in PACl-W coagulation coupled with NaOCl pre-oxidation. In contrast, ClO₂ pre-oxidation with PACl-H coagulation outperforms the floc formation and the reduction in each fluorescent DOM substance, especially for humic acid-like (HAL) substances reduction in response to charge neutralization. Regardless of pre-oxidation approach, PACl-H coagulation exhibits a superior reduction in carbonaceous DBP formation potential (C-DBPFP) comparative PACl-W coagulation, especially for intensified pre-oxidation (Cl₂:DOC = 3:1). Intensified NaOCl pre-oxidation is effective to enhance DBPFP reduction in a similar way to ClO₂ oxidation by coagulation with both PACl coagulants. In addition, it clearly demonstrates that the halogenated DBP precursors are well-correlated with UV₂₅₄ absorbance on the basis of principal component analysis (PCA) inference. It is concluded that intensified NaOCl pre-oxidation is an alternative approach to ClO₂ pre-oxidation for the minimization of DBP precursors in oxidation-coagulation processes for cyanobacteria-laden water treatment.