Effects of antibiotics and heavy metals on denitrification in shallow eutrophic lakes

Effects of arsenic and trace metals on bacterial denitrification process from estuarine sediments and associated nitrous oxide emission

Coastal ecosystems currently face significant challenges due to nutrient enrichment and trace metal contamination. However, the effects of arsenic (As) and other trace metals (copper, lead, zinc, cadmium, mercury) on denitrification processes and nitrous oxide (N2O) emissions in estuarine sediments remain poorly understood. Here, we examined the influence of As and other trace metals on denitrification and N2O emissions in a single denitrifying strain, Marinobacter sp. MSD-1, isolated from metal-contaminated estuarine sediments based on its As(III)-oxidizing and denitrifying abilities and functional microbial composition. The results showed that As did not significantly affect the denitrification or N2O emission of MSD-1. However, Cd(II) at concentrations of 5-10 mg/L significantly induced the accumulation of N2O, while not significantly affecting the reduction of nitrate (NO3-) and nitrite (NO2-). The presence of As(III) further inhibited the N2O reduction under Cd exposure, but it had no significant effect on the N2O reduction after exposure to other trace metals. A negative correlation was observed between N2O reductase (NO2R) activity and N2O emissions, indicating that Cd(II) inhibits the reduction process of N2O mainly by suppressing the activity of NO2R. This study highlights the detrimental effects of cadmium on microbial denitrification and subsequent emissions of the greenhouse gas N2O, thereby improving our understanding of how estuarine and coastal ecosystems respond and adapt to trace metal pollution.

Two-stage continuous cultivation of microalgae overexpressing cytochrome P450 improves nitrogen and antibiotics removal from livestock and poultry wastewater

Improper treatment of livestock and poultry wastewater (LPWW) rich in ammonium nitrogen (NH4-N) and antibiotics leads to eutrophication, and contributes to the risk of creating drug-resistant pathogens. The design-build-test-learn strategy was used to engineer a continuous process using Chlorella vulgaris to remove NH4-N and antibiotics. The optimized system removed NH4-N at a rate of 306 mg/L/d, degraded 99 % of lincomycin, and reduced the hydraulic retention time to 4 days. The physiological, metabolic, and genetic mechanisms used by microalgae to tolerate LPWW, remove NH4-N, and degrade antibiotics were elucidated. A new cytochrome P450 enzyme important for NH4-N and antibiotic removal was identified. Finally, application of synthetic biology improved the NH4-N removal rate to 470 mg/L/d, which is the highest removal rate using microalgae reported to date. This research contributes to the mechanistic understanding of wastewater detoxification by microalgae, and the goal of achieving a circular bioeconomy for nutrient and water recycling.

Photodegradation of ciprofloxacin and its interaction with Cu(II) in different water matrices: Insight into degradation pathways

Co-contamination of ciprofloxacin (CIP) and Cu(II) is common in marine aquaculture water. However, the transmission and transformation of these substances in natural water matrices are often overlooked. This study sought to assess the impact of Cu(II) on CIP degradation in distilled (DI) and simulated (SI) mariculture water, as well as to develop a relationship between Cu(II), CIP, and its degradation products. First, complexation assays and analog computations revealed that Cu (II) forms complexes by binding to the oxygen atoms of the carbonyl (C=O) and carboxyl (COOH) groups in the CIP molecule. Second, photodegradation experiments showed that Cu(II) significantly hindered the degradation effect of CIP in DI water, while Cu(II) did not significantly hinder the degradation of CIP in SI water. Furthermore, the effect of Cu(II) on the degradation mechanism of CIP was determined by combining quenching and EPR experiments, Materials Studio software calculations, and UPLC-MS results. It was demonstrated that Cu(II) enhanced the production of singlet oxygen (1O2), hydroxyl radicals (•OH), and superoxide radicals (•O2-) in DI water. In the presence of Cu(II), CIP undergoes hydroxylation and decarbonylation reactions, forming hydroxylated and nitroxylated products. Additionally, direct defluorination and cleavage of the piperazine ring occur, followed by complexation reactions with Cu(II). However, in SI water, the production of 1O2 depends on the indirect action of Cu(II) and the excited state transformation of organic matter. Experimental evidence has shown that CIP can create intermediate compounds that include O-O peroxide rings, with or without the presence of Cu(II). When Cu(II) is present, the cyclopropyl group of the CIP molecule is more prone to transformation and so degradation. Finally, the toxicity assessment results indicated that both Cu(II) and SI water increased the toxicity of the degradation products.

Coupling effects of aureomycin and zinc ion on nitrification process and nitrification enzymes during the biological nitrogen removal

Aureomycin and Zinc ion (Zn2+) are common antibiotics and heavy metals that exist in livestock wastewater. The coupling effects of Aureomycin and Zn2+ on the nitrification process and nitrification function enzymes are crucial for controlling nitrogen removal in livestock wastewater. However, rare studies were focused on the coupling effects of Aureomycin and Zn2+ on nitrification. This study employed a direct equipartition ray method to investigate the coupling effects of Aureomycin and Zn2+ on nitrification. The results suggested three different ratios of Aureomycin and Zn2+ affected nitrification performance differently. Ratio 1 and Ratio 2 exhibited a promotion effect with low concentrations and an inhibition effect with high concentrations on nitrification performance. The critical concentration for Ratio 1 and Ratio 2 were 5.00 mg L-1 and 1.90 mg L-1, respectively. Ratio 3 exhibited both time-dependent and concentration-dependent inhibitory effects on nitrification performance. The maximum inhibitory efficiency on nitrification performance was 90.0%, with a concentration of 34.5 mg L-1 at 96.0 h. The effects of binary mixture on nitrogen removal performance were attributed to the effects of binary mixture on nitrite oxidase activity. The qualitative evaluation of the concentration addition model and independent action model indicated Aureomycin and Zn2+ showed a synergistic effect with strong concentration-dependent and time-dependent in the whole concentration area. The synergistic effect of Aureomycin and Zn2+ on nitrite oxidase activity mainly depended on the concentration of Aureomycin. This study offers new insights into the effects of antibiotics and heavy metals on the biological nitrogen removal process.

Distinct roles of biochar and pyrite substrates in enhancing nutrient and heavy metals removal in intermittent-aerated constructed wetlands: Performances and mechanism

Constructed wetlands have been widely employed as a cost-effective and environmentally friendly alternative for treating primary and secondary sewage effluents. In this study, biochar and pyrite were utilized as electron donor substrates in intermittent-aerated vertical flow constructed wetlands to strengthen the nutrient and heavy metals removal simultaneously, and the response of nutrient reduction and microbial community to heavy metals stress was also explored. The results indicated that biochar addition exhibited a better nitrogen removal, while pyrite addition greatly promoted the phosphorus removal. Moreover, the high removal efficiencies of Cu2+, Pb2+ and Cd2+ (above 90%) except for Zn2+ were obtained in each system. However, the exposure of heavy metals decreased phosphorus removal while had little effect on nitrogen removal. The influent load and intermittent aeration implementation led to a significant shift in microbial community structures, but microbial biodiversity and abundance decreased under the exposure of heavy metals. Particularly, Thiobacillus and Ferritrophicum, associated with sulfur autotrophic denitrification and iron autotrophic denitrification, were more abundant in pyrite-based wetland systems.

Effects of antibiotics on microbial nitrogen cycling and N2O emissions: A review

Sulfonamides, quinolones, tetracyclines, and macrolides are the most prevalent classes of antibiotics used in both medical treatment and agriculture. The misuse of antibiotics leads to their extensive dissemination in the environment. These antibiotics can modify the structure and functionality of microbial communities, consequently impacting microbial-mediated nitrogen cycling processes including nitrification, denitrification, and anammox. They can change the relative abundance of nirK/norB contributing to the emission of nitrous oxide, a potent greenhouse gas. This review provides a comprehensive examination of the presence of these four antibiotic classes across different environmental matrices and synthesizes current knowledge of their effects on the nitrogen cycle, including the underlying mechanisms. Such an overview is crucial for understanding the ecological impacts of antibiotics and for guiding future research directions. The presence of antibiotics in the environment varies widely, with significant differences in concentration and type across various settings. We conducted a comprehensive review of over 70 research articles that compare various aspects including processes, antibiotics, concentration ranges, microbial sources, experimental methods, and mechanisms of influence. Antibiotics can either inhibit, have no effect, or even stimulate nitrification, denitrification, and anammox, depending on the experimental conditions. The influence of antibiotics on the nitrogen cycle is characterized by dose-dependent responses, primarily inhibiting nitrification, denitrification, and anammox. This is achieved through alterations in microbial community composition and diversity, carbon source utilization, enzyme activities, electron transfer chain function, and the abundance of specific functional enzymes and antibiotic resistance genes. These alterations can lead to diminished removal of reactive nitrogen and heightened nitrous oxide emissions, potentially exacerbating the greenhouse effect and related environmental issues. Future research should consider diverse reaction mechanisms and expand the scope to investigate the combined effects of multiple antibiotics, as well as their interactions with heavy metals and other chemicals or organisms.

Promoting the denitrification process by heavy metals in Liaohe Estuary sediment

The impact of heavy metal ions on the biodenitrification process remains unknown, which is the key to understand the nitrogen cycle in estuarine areas. Here, denitrification rate and the abundance of five denitrifying enzyme genes (narG, nirK, napA, norB and nosZ) in Liaohe Estuary sediments were examined, and the community structure of nirK denitrifying bacteria was also analyzed. The results demonstrate a significant positive correlation between heavy metal content (Cu2+, Zn2+, and Cr) and the denitrification rate, and the abundance of napA/norB (periplasmic nitrate reductase and nitric-oxide reductase) in sediments. The dominant narG denitrifiers were Pseudomonas, Hydrogenophaga, and Serratia known to be tolerant to heavy metal pollution. Sediment particle size, NO3-, NO2-, Zn2+, and Cd2+ were the key factors influencing the denitrifying community structure. These findings suggest that heavy metals may enhance the aerobic denitrification process in sediments and mitigate the adverse effects of high dissolved oxygen levels.

Removal of sulfamethoxazole and Cu, Cd compound pollution by arbuscular mycorrhizal fungi enhanced vertical flow constructed wetlands

The combined pollution of antibiotics and heavy metals (HMs) has a serious impact on the water ecological environment. Previous researches mainly focused on the removal of antibiotics or HMs as single pollutants, with limited investigation into the treatment efficiencies and underlying mechanisms associated with their co-occurring pollution. In this study, 16 micro vertical flow constructed wetlands (MVFCWs) were constructed to treat composite wastewater consisting of sulfamethoxazole (SMX), copper (Cu) and cadmium (Cd), involving two different inoculation treatments (arbuscular mycorrhizal fungi (AMF) inoculated and uninoculated) and eight kinds of pollutant exposure (Control Check (CK), SMX, Cu, Cd, SMX + Cu, SMX + Cd, Cu + Cd, SMX + Cu + Cd). The findings of this study demonstrated that the inoculation of AMF in MVFCWs resulted in removal efficiencies of SMX, Cu, and Cd ranging from 18.70% to 80.52%, 75.18% to 96.61%, and 40.50% to 89.23%, respectively. Cu and CuCd promoted the degradation of SMX in the early stage and inhibited the degradation of SMX in the later stage. Cd did not demonstrate a comparable promotive impact on SMX degradation, and its addition hindered Cu removal. However, comparatively, the presence of Cu exerted a more pronounced inhibitory effect on Cd removal. Furthermore, the addition of Cu augmented the abundances of Proteobacteria, Bacteroidetes (at the phylum level) and Rhodobacter, Lacunisphaera and Flavobacterium (at the genus level), and Cu exposure showed a substantially stronger influence on the microbial community than that of Cd and SMX. AMF might confer protection to plants against HMs and antibiotics by enriching Nakamurella and Lacunisphaera. These findings proved that AMF-C. indica MVFCW was a promising system, and the inoculation of AMF effectively enhanced the simultaneous removal of compound pollution.

Microbial community and gene dynamics response to high concentrations of gadolinium and sulfamethoxazole in biological nitrogen removal system

The impact of high antibiotic and heavy metal pollution levels on biological nitrogen removal in wastewater treatment plants (WWTPs) remains poorly understood, posing a global concern regarding the issue spread of antibiotic resistance induced by these contaminants. Herein, we investigated the effects of gadolinium (Gd) and sulfamethoxazole (SMX), commonly found in medical wastewater, on biological nitrogen removal systems and microbial characteristics, and the fate of antibiotic resistance genes (ARGs), metal resistance genes (MRGs), and mobile genetic elements (MGEs). Our findings indicated that high SMX and Gd(III) concentrations adversely affected nitrification and denitrification, with Gd(III) exerting a strong inhibitory effect on microbial activity. Metagenomic analysis revealed that high SMX and Gd(III) concentrations could reduce microbial diversity, with Thauera and Pseudomonas emerging as dominant genera across all samples. While the relative abundance of most ARGs decreased under single Gd(III) stress, MRGs increased, and nitrification functional genes were inhibited. Conversely, combined SMX and Gd(III) pollution increased the relative abundance of intl1. Correlation analysis revealed that most genera could host ARGs and MRGs, indicating co-selection and competition between these resistance genes. However, most denitrifying functional genes exhibited a positive correlation with MRGs. Overall, our study provides novel insights into the impact of high concentrations of antibiotics and heavy metal pollution in WWTPs, and laying the groundwork for the spread and proliferation of resistance genes under combined SMX and Gd pollution.

Distribution and relationship of antibiotics, heavy metals and resistance genes in the upstream of Hanjiang River Basin in Shiyan, China

The upstream basin of Hanjiang River is an important water source for the middle route of China's South-to-North Water Diversion Project. The quality of water and soil in the Hanjiang River have enormous biological and environmental impacts, and resistant genetic contamination has emerged, but only few studies are concerned the correlation between heavy metals and metal resistance genes (MRGs). In this study, 8 antibiotics and 19 heavy metals were analyzed, the results showed that the highest antibiotic content was tetracycline, with mean concentrations of 43.201 µg/kg and 0.022 µg/L. Mn was the highest heavy metal in soil with a content of 1408.284 µg/kg, and in water was Zn with a content of 10.611 µg/L. We found that the most abundant antibiotic resistance genes (ARGs) and metal resistance genes (MRGs) in the study area were bacA and arsT genes, coding for resistance mechanisms to bacitracin and arsenic, respectively. The data showed that heavy metals had a greater impact on antibiotic resistance genes than antibiotics, and the correlation between resistance genes was significantly positive. This work expands our understanding of the correlations of antibiotics, heavy metals, and resistance genes in the Hanjiang River, indicating that more attention should be paid to the effects of resistance genes and the quality of water.

Occurrence, distribution and their correlation with different parameters of antibiotics and antibiotic resistance genes in lakes of China: A review

The exposure of antibiotics and antibiotic resistance genes (ARGs) as potential threats to the environment has raised global concern. This study provides discussion on the emergence and distribution of antibiotics and ARGs in lakes. The correlation of critical water quality parameters with antibiotics and ARGs are evaluated along with their integrative potential ecological risk. Sulfonamides (∼67.18 ng/L) and quinolones (∼77.62 ng/L) were the dominant antibiotics distributed in the aqueous phase, while the quinolones and tetracyclines were the primary contamination factors in the sediment phase. The temporal and spatial distribution revealed that the antibiotic concentrations were significantly lower in summer than other seasons and the lakes in Hebei and Jiangsu provinces exhibited the highest antibiotic pollution. The detection frequency and relative abundance of sul1 gene have been the highest among all detected ARGs. Moreover, ARGs in lakes were driven by several factors, with bacterial communities and mobile genetic elements that prevailed the positive distribution of ARGs. Antibiotics have been identified as critical factors in inducing the propagation of ARGs, which could be further enhanced by chemical contaminants (e.g., heavy metals and nutrients). Involving the risk assessment strategies, research attention should be paid on three antibiotics (ofloxacin, sulfamethoxazole and erythromycin) to strengthen the policy and management of Baiyangdian Lake and East Dongting Lake. This review analysis will provide in-depth understanding to the researchers and policy-makers in formulation of strategies for remediation of antibiotic contamination in the lakes.

Recent advances in the biological treatment of wastewater rich in emerging pollutants produced by pharmaceutical industrial discharges

Pharmaceuticals and personal care products present potential risks to human health and the environment. In particular, wastewater treatment plants often detect emerging pollutants that disrupt biological treatment. The activated sludge process is a traditional biological method with a lower capital cost and limited operating requirements than more advanced treatment methods. In addition, the membrane bioreactor combines a membrane module and a bioreactor, widely used as an advanced method for treating pharmaceutical wastewater with good pollution performance. Indeed, the fouling of the membrane remains a major problem in this process. In addition, anaerobic membrane bioreactors can treat complex pharmaceutical waste while recovering energy and producing nutrient-rich wastewater for irrigation. Wastewater characterizations have shown that wastewater's high organic matter content facilitates the selection of low-cost, low-nutrient, low-surface-area, and effective anaerobic methods for drug degradation and reduces pollution. However, to improve the biological treatment, researchers have turned to hybrid processes in which all physical, chemical, and biological treatment methods are integrated to remove various emerging contaminants effectively. Hybrid systems can generate bioenergy, which helps reduce the operating costs of the pharmaceutical waste treatment system. To find the most effective treatment technique for our research, this work lists the different biological treatment techniques cited in the literature, such as activated sludge, membrane bioreactor, anaerobic treatment, and hybrid treatment, combining physicochemical and biological techniques.

Usage of antibiotics in aquaculture and the impact on coastal waters

For decades, coastal marine ecosystems have been threatened by a wide range of anthropogenic pollutants. Recently, there has been increasing concern about the accumulation and impacts of antibiotic compounds on marine ecosystems. However, information regarding the accumulation of antibiotics and the impacts they may have on microbial communities in coastal water bodies and on human health is sparse in literature. Antibiotics from aquacultures are constantly discharged into marine environments via rivers. Large rivers transport tons of antibiotics every year into coastal waters, e.g., 12 tons of sulfonamide by the river Mekong. Here, we discuss a potential influence of such imported antibiotics on bacterial communities in coastal waters. Potential accumulation of antibiotics in the uppermost surface layer of aquatic ecosystems, the so-called sea surface microlayer (SML), is of interest. Because of the ability of the SML to accumulate anthropogenic pollutants, it may serve as a pool for antibiotics and correspondingly also for resistant organisms. Also, due to its biofilm-like structure, the SML could serve as a hotspot for horizontal gene transfer, speeding up the spread of antibiotic resistant strains to encompassing marine environments. The emergence of antibiotic resistant bacteria is a global threat and scientists projected that it could pave the way for the next pandemic that could ravage the world in the next decades. For this reason, it is time to focus research on understanding and minimizing the impact of antibiotics on the sustainability of coastal waters and on the health of humans who depend on coastal resources for food and recreational purposes. Also, knowledge about antibiotics in the SML is necessary to understand the effects they are likely to have on bacterial abundance, diversity, and metabolic activities in coastal water bodies.

Biomimetic multifunctional hybrid sponge via enzymatic cross-linking to accelerate infected burn wound healing

Preparing sponge dressings with stable wet adhesion remains difficult in wound repair, especially in burn wounds with bleeding and large amounts of exudate. In this work, a multifunctional hybrid sponge dressing (DHGT+PHMB+TiO₂NPs) with good wet adhesion was developed by combining biomimetic and enzymatic cross-linking reactions. The sponge dressing matrix (DHGT) was prepared by tyrosinase-catalyzed cross-linking of dopamine-modified hyaluronic acid (DOPA-HA) and gelatin. The multifunctional hybrid sponge dressing was obtained by loading polyhexamethylene biguanide (PHMB) and titanium dioxide nanoparticles (TiO₂NPs) onto the DHGT matrix. The newly developed sponge dressing exhibited high mechanical properties, good wet adhesion, antibacterial activity, reactive oxygen species (ROS) scavenging, biocompatibility, and excellent hemostasis ability. In vivo studies showed that the multifunctional hybrid sponge dressing could significantly accelerate the healing of infected full-thickness burn wounds by inhibiting bacterial growth, accelerating skin tissue reepithelialization, collagen deposition, and angiogenesis, as well as regulating the expression of inflammatory factors and cytokines.

Tertiary Wastewater Treatment Processes Can Be a Double-Edged Sword for Water Quality Improvement in View of Mitigating Antimicrobial Resistance and Pathogenicity

Despite the high removal efficiency for chemical pollutants by tertiary wastewater treatment processes (TWTPs), there is no definite conclusion in terms of microbial risk mitigation yet. This study utilized metagenomic approaches to reveal the alterations of antibiotic resistance genes (ARGs), virulence factor genes (VFGs), their co-occurrence, and potential hosts during multiple TWTPs. Results showed that the TWTPs reduced chemical pollutants in wastewater, but the denitrifying biofilter (DB) significantly increased the absolute abundances of selected antibiotic-resistant bacteria and ARGs, and simultaneously elevated the relative abundances of ARGs and VFGs through the enrichment of multidrug resistance and offensive genes, respectively. Moreover, the co-occurrence of ARGs and VFGs (e.g., bacA-tapW, mexF-adeG) was only identified after the DB treatment and all carried by Pseudomonas. Then, the ultraviolet and constructed wetland treatment showed good complementarity for microbial risk reduction through mitigating antibiotic resistance and pathogenicity. Network and binning analyses showed that the shift of key operational taxonomic units affiliating to Pseudomonas and Acinetobacter may contribute to the dynamic changes of ARGs and VFGs during the TWTPs. Overall, this study sheds new light on how the TWTPs affect the antibiotic resistome and VFG profiles and what TWTPs should be selected for microbial risk mitigation.

Current Concentrations of Zn, Cu, and As in Piggery Wastewater Compromise Nutrient Removals in Microalgae–Bacteria Photobioreactors Due to Altered Microbial Communities

Simple Summary

Photobioreactor systems based on consortia of microalgae and bacteria are a promising, efficient and sustainable alternative for treatment of wastewaters with high nitrogen content, such as piggery wastewater. In these biological systems, microorganisms play a key role in wastewater treatment by degradation of organic matter and accumulation of nutrients into the generated biomass. However, these wastewaters often contain high concentrations of zinc, copper and arsenic, which can severely affect the activity and growth of microorganisms, and so, the wastewater treatment performance. This article studies the effect of high concentrations of zinc, copper and arsenic on microbial communities, specifically microalgae and bacteria, in photobioreactors treating piggery wastewater, with the aim of elucidating their impact on wastewater treatment performance. For this purpose, the growth of microalgae and the composition and structure of bacterial communities exposed to these pollutants were studied. The performance of the reactors was also evaluated by determining the removal of nutrients, zinc, copper and arsenic. The results showed that high concentrations of zinc, copper and arsenic in piggery wastewater significantly affect the microbiome of the reactors without recovery after exposure to these contaminants, resulting in poorer performance of the reactors and compromising the environmental and health impact of treated effluents.

Abstract

The treatment of pig manure is a major environmental issue, and photobioreactors containing consortia of microalgae and bacteria have proven to be a promising and sustainable treatment alternative. This work studies the effect of Cu, Zn and As, three toxic elements frequently present in piggery wastewater, on the performance and microbiome of photobioreactors. After dopage with Zn (100 mg/L), Cu (100 mg/L), and As (500 µg/L), the high biomass uptake of Zn (69–81%) and Cu (81–83%) decreased the carbon removal in the photobioreactors, inhibited the growth of Chlorella sp., and affected heterotrophic bacterial populations. The biomass As uptake result was low (19%) and actually promoted microalgae growth. The presence of Cu and As decreased nitrogen removal, reducing the abundance of denitrifying bacterial populations. The results showed that metal(loid)s significantly affected 24 bacterial genera and that they did not recover after exposure. Therefore, this study makes an important contribution on the impact of the presence of metal(loid)s in piggery wastewater that compromises the overall performance of PBRs, and so, the environmental and health impact of treated effluents.

Recent Trends in Biosensors for Environmental Quality Monitoring

The monitoring of environmental pollution requires fast, reliable, cost-effective and small devices. This need explains the recent trends in the development of biosensing devices for pollutant detection. The present review aims to summarize the newest trends regarding the use of biosensors to detect environmental contaminants. Enzyme, whole cell, antibody, aptamer, and DNA-based biosensors and biomimetic sensors are discussed. We summarize their applicability to the detection of various pollutants and mention their constructive characteristics. Several detection principles are used in biosensor design: amperometry, conductometry, luminescence, etc. They differ in terms of rapidity, sensitivity, profitability, and design. Each one is characterized by specific selectivity and detection limits depending on the sensitive element. Mimetic biosensors are slowly gaining attention from researchers and users due to their advantages compared with classical ones. Further studies are necessary for the development of robust biosensing devices that can successfully be used for the detection of pollutants from complex matrices without prior sample preparation.