Preparation of amine-functionalized lignins for the selective adsorption of Methylene blue and Congo red

Facile synthesis of iminated lignin for enhanced free radical and lead ion scavenging capabilities

Kraft lignin (KL) holds significant potential as a renewable resource for the development of innovative materials that are currently not fully utilized. In this study, a novel iminated lignin (IL) was synthesized by grafting primary amine lignin (N-KL) onto salicylaldehyde. The effects of the dosage and reaction temperature on the nitrogen content of N-KL were evaluated. The maximum nitrogen content in N-KL reached to 3.32 %. Characterization by spectroscopy techniques (FT-IR, XPS, and NMR), elemental analysis, and gel permeation chromatography confirmed the imination of lignin. Additionally, the antioxidant activity of the lignin samples was investigated using the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging ability. Moreover, the DPPH radical scavenging capacity of IL-6 (IC50 = 38.6 ± 3.9 μg/mL) was close to that of commercial antioxidant butylated hydroxytoluene (BHT) (IC50 = 37.7 ± 4.5 μg/mL). Furthermore, the adsorption equilibrium results indicated that IL-6 had a maximum uptake of 115.6 mg/g Pb2+, which was 3.2-fold higher than that of KL. Kinetic adsorption experiments suggested that IL-6 adsorption follows a pseudo-second-order model. Therefore, the synthesized iminated lignin is a promising candidate for the development of environmentally friendly materials with applications as an antioxidant and lead-ion adsorbent.

The Synthesis of Amino-Acid-Anchored Two-Dimensional Silicoaluminophosphates and Congo Red Adsorption Application

Two-dimensional (2D) materials with nanometer thickness have the advantage of a large specific surface area and excellent surface accessibility. They have great potential for adsorption, catalysis, and many other applications. 2D zeolitic silicoaluminophosphates (SAPOs) can be synthesized through a dual structure directing agent (SDA) strategy. But the materials have been primarily used in their organic-free form. In this work, we demonstrate that the same synthesis strategy is effective for developing amino-acid-anchored 2D SAPOs through a one-step synthesis. Because of the addition of amino acids, the surficial amino and carboxylic groups serve as active sites for adsorption and catalysis. Congo red adsorption is used to evaluate the potential of using the organic functional groups as active adsorption sites. The 2D SAPO materials have demonstrated excellent Congo red removal efficiency with close to complete removal for certain concentrations. The effects of the amino acid concentration and hydrothermal synthesis time on material morphology development will be discussed. Thorough characterization by SEM, TEM, FTIR, XRD, and nitrogen adsorption has been done to reveal the properties of the amino-acid-anchored 2D SAPOs.

Selective adsorption of Cr(VI) by nitrogen-doped hydrothermal carbon in binary system

Selective adsorption of heavy metal ions from industrial effluent is important for healthy ecosystem development. However, the selective adsorption of heavy metal pollutants by biochar using lignin as raw material is still a challenge. In this paper, the lignin carbon material (N-BLC) was synthesized by a one-step hydrothermal carbonization method using paper black liquor (BL) as raw material and triethylene diamine (TEDA) as nitrogen source. N-BLC (2:1) showed excellent selectivity for Cr(VI) in the binary system, and the adsorption amounts of Cr(VI) in the binary system were all greater than 150 mg/g, but the adsorption amounts of Ca(II), Mg(II), and Zn(II) were only 19.3, 25.5, and 6.3 mg/g, respectively. The separation factor (SF) for Cr(VI) adsorption was as high as 120.0. Meanwhile, FTIR, elemental analysis and XPS proved that the surface of N-BLC (2:1) contained many N- and O- containing groups which were favorable for the removal of Cr(VI). The adsorption of N-BLC (2:1) followed the Langmuir model and its maximum theoretical adsorption amount was 618.4 mg/g. After 5th recycling, the adsorption amount of Cr(VI) by N-BLC (2:1) decreased about 15%, showing a good regeneration ability. Therefore, N-BLC (2:1) is a highly efficient, selective and reusable Cr(VI) adsorbent with wide application prospects.

Microwave synthesis of amino-functionalized MCM-41 from coal gasification fine slag for efficient bidirectional adsorption of anionic and cationic dyes

Coal based solid waste has been recognized as a sustainable raw material for the preparation of high added value materials for wastewater treatment. In this paper, a preparation route was designed for the rapid, efficient, and low-cost preparation of MCM-41 zeolite using coal gasification fine slag as raw material. Functionalization modification of MCM-41 was carried out by grafting amino groups on its surface to improve its application performance. Moreover, the prepared functionalized material is used for bidirectional adsorption of anionic and cationic dyes. The experimental results indicate that MCM-41 zeolite with highly ordered pore structure was rapidly prepared using the advantages of fast heating and strong permeability of microwave synthesis method, with a specific surface area of up to 862.03 m2/g. Amine functionalized MCM-41 exhibits strong adsorption capacity for both cationic and anionic dyes, with maximum adsorption capacities for methylene blue and Congo red being 292.40 mg/g and 354.61 mg/g, respectively. The study of adsorption kinetics and adsorption mechanism indicate that the adsorption process is mainly controlled through chemical adsorption, including electrostatic attraction, hydrogen bonding, and π-π interactions. The results of this study will provide useful references for the use of coal based solid waste to prepare functional materials for the treatment of organic wastewater.

The effect of the number of SO3- groups on the adsorption of anionic dyes by the synthesized hydroxyapatite/Mg-Al LDH nanocomposite

In this study, a new nanocomposite of hydroxyapatite (HA)/Mg-Al layered double hydroxide (LDH) was successfully formed via a facile co-precipitation method and applied to adsorb three anionic dyes of alizarin red S (ARS), Congo red (CR), and reactive red 120 (RR120) differing in the number of SO3- groups from aqueous solution. Based on a combination of characterization analysis and adsorption experiments, HA/Mg-Al LDH nanocomposite showed better adsorption performance than HA and Mg-Al LDH. Using XRD and TEM analyses, the crystallinity and the presence of nanoparticles were confirmed. According to the SEM investigation, the Mg-Al LDH layers in the nanocomposite structure were delaminated, while HA nanorods were formed at the surface of Mg-Al LDH nanoparticles. The higher BET surface area of the novel HA/Mg-Al LDH nanocomposite compared to HA and Mg-Al LDH provided its superior adsorption performance. Considering an effective amount of adsorbent dosage, pH 5 was selected as the optimum pH for each of the three dye solutions. According to the results from the study of contact time and initial concentration, the pseudo-second-order kinetic (R2 = 0.9987, 0.9951, and 0.9922) and Langmuir isotherm (R2 = 0.9873, 0.9956, and 0.9727) best fitted the data for ARS, CR, and RR120, respectively. Anionic dyes with different numbers of SO3- groups demonstrated distinct adsorption mechanisms for HA and Mg-Al LDH nanoparticles, indicating that the adsorption capacity is influenced by the number of SO3- groups, with HA/Mg-Al LDH nanocomposite offering superior performance toward dyes with higher numbers of SO3- groups. Furthermore, ΔH° less than 40 kJ/mol, positive ΔS°, and negative ΔG° accompanied by the mechanism clarifying show physical spontaneous adsorption without an external source of energy and increase the randomness of the process during the adsorption, respectively. Finally, the regeneration study demonstrated that the nanocomposite could be utilized for multiple adsorption-desorption cycles, proposing the HA/Mg-Al LDH as an economically and environmentally friendly adsorbent in the adsorption of anionic dyes in water treatment processes.

Effective adsorption of As(V) from aqueous solution by quaternary ammonium and Zn2+ decorated lignin-based sorbent

Arsenic poses a serious harm to the natural environment and human health. Lignin decorated with quaternary ammonium and metal ion can effectively adsorb arsenic from aqueous solution. Zn2+/quaternary ammonium lignin was synthesized by quaternization and metallization from lignin with 3-Chloro-2-hydroxypropyl trimethylammonium chloride and ZnCl2. The morphology, functional groups and chemical compositions of adsorbent were identified by SEM-EDS, FTIR and XRD. The effects such as pH, initial As(V) concentration, contact time and adsorbent dosage on the adsorption capacity were investigated in batch system. The adsorption mechanism was explored by SEM-EDS, FTIR and XPS. It was shown that the adsorbent was rough and contained a large amount of quaternary ammonium and Zn2+. Zn2+/quaternary ammonium lignin exhibited much strong affinity towards As(V) with the maximum adsorption capacity of 70.38 mg·g-1 at 25 °C, oscillation rate of 180 r·min-1, pH of 5, initial As(V) concentration of 100 mg·L-1, contact time of 30 min and 1 g·L-1 Zn2+/quaternary ammonium lignin. The adsorption could be well described by Langmuir model and quasi-second-order kinetic model, indicating the monolayer homogeneous chemisorption nature. As(V) was adsorbed through electrostatic attraction of Zn2+ and ion exchange between H2AsO4- and Cl-.

Eco-friendly regeneration of lignin with acidic deep eutectic solvent for adsorption of pollutant dyes for water cleanup

In this study, a simple and eco-friendly method was used to treat alkaline lignin with an acidic deep eutectic solvent (DES) to obtain regenerated lignin for the efficient adsorption of pollutant dyes from aqueous environment. Based on the yield and adsorption capacity of the sorbent for these dyes, conditions such as the type and concentration of DES component, solid-to-liquid ratio, reaction time, and temperature were optimized. By characterizing and comparing alkali lignin with regenerated lignin, a series of reactions were demonstrated to occur during the DES treatment process. The performance and mechanism of methylene blue and rhodamine B adsorption on regenerated lignin were studied systematically, and the maximum adsorbed amounts were 348.29 and 551.05 mg/g at 323 K, respectively. This study provides a new strategy for the green preparation of functionalized lignin and its use in the water pollutant treatment.

Facile construction of lignin-based network composite hydrogel for efficient adsorption of methylene blue from wastewater

Adsorption method is an effective approach to treat wastewater containing methylene blue. Herein, a cost-effective and eco-friendly lignin-based network composite hydrogel adsorbent (PAA@SML) was constructed by using polyacrylic acid (PAA) to crosslink with sulfomethylated lignin (SML) via free radical polymerization for adsorption of methylene blue (MB) from wastewater. The constructed PAA@SML-0.2 exhibited remarkable adsorption performance towards removal of MB, with a maximum theoretical adsorption capacity of 777.1 mg·g-1. The improved efficiency can be attributed to the well-established network structure and abundant hydrophilic functional groups present in the adsorbent, promoting the interaction between methylene blue (MB) molecules and the adsorption sites of the adsorbent. The adsorption process of the adsorbent for MB followed the pseudo-second-order kinetic and the Langmuir isotherm models, which illustrated the adsorption process attributed to monolayer chemisorption. Mechanism investigation confirmed that the adsorption of MB by PAA@SML-0.2 primarily relied on hydrogen bonding and electrostatic interactions. Moreover, the recyclability test demonstrated excellent regeneration usability and stability of PAA@SML-0.2, and the adsorption capacity maintained above 74.0 % after five cycles. This constructed lignin-based network composite hydrogel is considered to have great potential in the treatment of organic dye in wastewater.

Preparation and characterization of zwitterion-substituted lignin/Nafion composite membranes

In this study, a novel zwitterion-substituted lignin (ZL) containing amino and sulfonic acid groups was synthesized, and ZL/Nafion composite membranes were fabricated as proton exchange membranes. Kraft lignin was modified using an aminosilane and 1,3-propanesultone via a continuous grafting reaction to provide zwitterionic moieties. Chemical structural analyses confirmed the successful introduction of the zwitterion moiety into lignin. In particular, the surface charge of ZL is positive in an acidic medium and negative in a basic medium, suggesting that ZL is a zwitterionic material. ZL was incorporated into a Nafion membrane to enhance its ion exchange capacity, thermal stability, and hydrophilicity. The proton conductivity of ZL/Nafion 0.5 %, 151.0 mS/cm, was 55.3 % higher than that of unmodified ML (methanol-soluble lignin)/Nafion 0.5 % (97.2 mS/cm), indicating that the zwitterion moiety of ZL enhances the proton transport ability. In addition, oxidative stability evaluation confirmed that ZL/Nafion 2 % was chemically more durable than pure Nafion. This confirmed that using lignin as a membrane additive yielded positive results in terms of chemical durability and oxidation stability in Nafion. Therefore, ZL is expected to be utilized as a multifunctional additive and exhibits the potential for fuel cell applications.

Preparation of amphoteric double network hydrogels based on low methoxy pectin: Adsorption kinetics and removal of anionic and cationic dyes

The objective of this research was to devise a functional hydrogel was synthesized using pectin (PE), acrylic acid (AA), dimethyldiallyl ammonium chloride (DC), and polyvinyl alcohol (PVA), designed to adsorb both cationic and anionic dyes concurrently. The low methoxy pectin formed double network hydrogel through chemical and physical crosslinking with AA and PVA respectively. DC is combined into the hydrogel system through copolymerization reaction. Analysis of hydrogel's physicochemical properties was conducted using techniques such as infrared spectroscopy, texture analysis, thermogravimetry, and scanning electron microscopy. Dyes adsorption studies showed that the LP/AA/DC/PVA-2 hydrogel, prepared at the molar ratio of AA to DC of 1:2, exhibited higher adsorption efficiency for methylene blue (MB) and Congo red (CR). Kinetics and isotherms studies indicated that the adsorption behavior conformed to the pseudo-second-order kinetic model and Langmuir isotherm model. By the Langmuir isotherm fitting, the maximum adsorption capacities of MB and CR by LP/AA/DC/PVA-2 were recorded to be 222.65 mg/g and 316.46 mg/g, respectively. The adsorption mechanism is dominated by the hydrogen bonding and electrostatic interactions. Further, the adsorption and desorption experiments demonstrated that LP/AA/DC/PVA-2 hydrogel have excellent reusability.

Efficient adsorption of azo anionic dye Congo Red by micro-nano metal-organic framework MIL-68(Fe) and MIL-68(Fe)/chitosan composite sponge: Preparation, characterization and adsorption performance

Micro-nano metal-organic framework (MIL-68(Fe)) for efficient adsorption of azo anionic dye Congo red (CR) was successfully prepared by one-step hydrothermal method under acidic environment. And a MIL-68(Fe)/chitosan composite sponge (MIL-68(Fe)/CS) was prepared under the coating of chitosan (CS). After comparing the performance of MIL-68(Fe) and MIL-68(Fe)/CS, we focus on exploring MIL-68(Fe)/CS. It ensured the CR removal efficiency while reaching the adsorption equilibrium faster than MIL-68(Fe), and solved the defect that the powder was difficult to be stripped by water after adsorption. The physicochemical properties and surface morphology of the adsorbent were characterized by SEM, FTIR, XRD, TGA, BET, and Zeta potential. The effects of pH, contact time, adsorbent dosage, initial solution concentration and temperature on the adsorption performance of the adsorbent were systematically analyzed. The pseudo-second-order model and the Sips model were most consistent for the adsorption process, indicating that the adsorption process of MIL-68(Fe)/chitosan composite sponge on CR is a complex physicochemical process. The removal rates of CR by MIL-68(Fe) and MIL-68(Fe)/chitosan composite sponge reached the maximum values of 99.55 % and 99.51 % at 318 K, respectively. And the maximum adsorption capacity of CR by MIL-68(Fe)/chitosan composite sponge at 318 K was 1184.16 mg·g-1. After six cycles of adsorption and desorption, the removal rate of CR was still higher than 80 %. The synergistic effects of π-π stacking, electrostatic interactions, hydrogen bonding and pore filling have important effects on CR removal.

Polyvinyl Alcohol-Citric Acid: A New Material for Green and Efficient Removal of Cationic Dye Wastewater

The citric acid (CA) cross-linked polyvinyl alcohol (PVA) adsorbent, PVA-CA, was efficiently synthesized and its application to the removal of dyes in water, particularly the cationic dye, methylene blue (MB), was thoroughly investigated. The morphologies and physiochemical characteristics of PVA-CA were fully characterized by SEM, FT-IR, XRD, TGA, BET, and XPS. The effects of contact time, adsorbent dosage, MB concentration, solution pH, and temperature on the adsorption performance were compared using controllable methods. The maximum adsorption capacity of PVA-CA was 709.86 mg g-1 and the removal rate remained high through several adsorption-desorption cycles, demonstrating that such a composite absorbent has a good adsorption performance and recoverability. Further analysis by the density functional theory (DFT) showed that van der Waals interactions, electrostatic interactions and hydrogen bonding interactions between PVA-CA and MB played significant roles in the adsorption mechanism.

Adsorption of methyl orange from aqueous solution with lignin-modified metal-organic frameworks: Selective adsorption and high adsorption capacity

The lignin-based metal-organic framework (UIO-g-NL) was prepared by a Schiff base reaction of aminated lignin and the zirconium cluster-based MOF (UIO-66-NH2) as an adsorbent of methyl orange (MO). The results showed that UIO-g-NL maintained the original crystal structure and aminated lignin was successfully introduced after functionalization. UIO-g-NL selectively adsorbed MO from a mixed solution 50 mg/L MO and 50 mg/L methylene blue (MB), with an adsorption efficiency of nearly 100%. In a mixed solution 250 mg/L MB and 250 mg/L MO, UIO-g-NL adsorbed both dyes with 1120.70 mg/g for MB and 961.54 mg/g for MO. Hydrogen bonding, π-π and NH-π interactions, and electrostatic attraction contribute to the MO adsorption by UIO-g-NL. In the MO/MB mixture, MO adsorption by UIO-g-NL follows the pseudo-second-order kinetic and Freundlich isotherm models, which is an endothermic, spontaneous, and feasible adsorption process. Furthermore, the MO adsorption efficiency of UIO-g-NL remained high (>90%) after six re-use cycles.

Adsorption of methyl orange dye by SiO2 mesoporous nanoparticles: adsorption kinetics and eco-toxicity assessment in Zea mays sprout and Artemia salina

Herein, we prepared the silica nanoparticles (SiO2 NPs) by a modified Stober's method for methyl orange (MO) removal. The SiO2 NPs were found to be spherical with a zeta size of 152.5 d. nm, a PDI of 0.377, and a zeta potential of -5.59 mV. The effect of different parameters (initial dye concentration, reaction time, temperature, and pH) on the adsorption of MO by SiO2 NPs was determined. The adsorption pattern of SiO2 NPs was highly fitted with the Langmuir, Freundlich, Redlich-Peteroen, and Temkin isotherm models. The highest adsorption rate was recorded at 69.40 mg/g of SiO2 NPs. Furthermore, the toxic effect of before and after removal of MO in aqueous solution was tested in terms of phytotoxicity and acute toxicity. The SiO2 NPs treated MO dye solution were not exhibited significant toxicity to corn seeds and Artemia salina. These results indicated that SiO2 NPs can be used for the adsorption of MO.

"Functional connector" strategy on tunable organo-vermiculites: The superb adsorption towards Congo Red

With the increasingly worldwide concentration of environmental pollution, exploiting cost-effective adsorbents has been a research hotspot. Here we introduce novel "functional connector" amide-containing gemini surfactants (LDAB, LDAPP, LDAMP and LDABP) and apply to modify Na-vermiculite (Na-Vt) for Congo red (CR) removal. Chain amide as the functional connector in the modifier, increases 6.9 times of CR uptake than traditional organo-Vts, which is further enhanced by tunning the functional group of modifier spacers. Superb uptake of CR on organo-Vts reaches 1214.05, 1375.47 and 1449.80 mg/g, and the removal efficiencies achieve 80.94%, 91.70% and 96.65% on LDAB-Vt, LDAPP-Vt and LDAMP-Vt, respectively. Notably, the maximum experimental adsorption capacity of LDAPP-Vt is 1759.64 mg/g. These experimental values are among the highest reported CR adsorbents. A combination experimental and theoretical analysis is conducted to unveil the structure-adsorptivity relationship: (i) Adsorptivity enhancement of organo-Vts is more effectively by regulating functional chains than the functional spacer. (ii) para-substituted aromatic spacers own the best adsorptive configuration and strongest stability for π-π interaction. (iii) π-π interaction provided by isolated aromatic ring is stronger than biphenyl, whose steric hindrance depresses the adsorptivity. Results in this study not only explain a new "functional connector" strategy to Vt-based adsorbents, but also provide a practical designing strategy for organic adsorbents characterized with high uptake capacity.

Preparation of DES lignin-chitosan aerogel and its adsorption performance for dyes, catechin and epicatechin

Herein, DES lignin was obtained by pretreatment of grapevine with a deep eutectic solvent (ChCl-LA). A novel chitosan-DES lignin composite aerogel material (CS-LIG aerogel) was prepared to adsorb methylene blue (MB), Congo red (CR), catechin (C), and epicatechin (EC). The CS-LIG aerogel was systematically characterized by modern technological instruments. It was demonstrated that the DES lignin was successfully incorporated and had an important effect on the morphological structure and adsorption of dyes and natural products in the aerogel. The adsorption kinetic models for both adsorbed CR and MB are pseudo-second-order models. Adsorption isotherms followed Langmuir for the adsorption of CR and Freundlich for the adsorption of MB. The π-π interaction and hydrogen bonding of DES lignin aromatic groups in CS-LIG aerogels were responsible for the adsorption of C and EC with 86.42 % and 90.85 % removal rates, respectively. This study opens a new avenue for the high-value utilization of DES lignin and the preparation of chitosan-based composites for the adsorption of dyes and purification of natural products.

Hydrothermal Synthesis of a Technical Lignin-Based Nanotube for the Efficient and Selective Removal of Cr(VI) from Aqueous Solution

Aminated lignin (AL) was obtained by modifying technical lignin (TL) with the Mannich reaction, and aminated lignin-based titanate nanotubes (AL-TiNTs) were successfully prepared based on the AL by a facile hydrothermal synthesis method. The characterization of AL-TiNTs showed that a Ti-O bond was introduced into the AL, and the layered and nanotubular structure was formed in the fabrication of the nanotubes. Results showed that the specific surface area increased significantly from 5.9 m2/g (TL) to 188.51 m2/g (AL-TiNTs), indicating the successful modification of TL. The AL-TiNTs quickly adsorbed 86.22% of Cr(VI) in 10 min, with 99.80% removal efficiency after equilibration. Under visible light, AL-TiNTs adsorbed and reduced Cr(VI) in one step, the Cr(III) production rate was 29.76%, and the amount of total chromium (Cr) removal by AL-TiNTs was 90.0 mg/g. AL-TiNTs showed excellent adsorption capacities of Zn2+ (63.78 mg/g), Cd2+ (59.20 mg/g), and Cu2+ (66.35 mg/g). After four cycles, the adsorption capacity of AL-TiNTs still exceeded 40 mg/g. AL-TiNTs showed a high Cr(VI) removal efficiency of 95.86% in simulated wastewater, suggesting a promising practical application in heavy metal removal from wastewater.

Efficient and Selective Adsorption of Cationic Dye Malachite Green by Kiwi-Peel-Based Biosorbents

In this study, pristine kiwi peel (KP) and nitric acid modified kiwi peel (NA-KP) based adsorbents were prepared and evaluated for selective removal of cationic dye. The morphology and chemical structure of KP and NA-KP were fully characterized and compared, and results showed nitric acid modification introduced more functional groups. Moreover, the adsorption kinetics and isotherms of malachite green (MG) by KP and NA-KP were investigated and discussed. The results showed that the adsorption process of MG onto KP followed a pseudo-second-order kinetic model and the Langmuir isotherm model, while the adsorption process of MG onto NA-KP followed a pseudo-first-order kinetic model and the Freundlich isotherm model. Notably, the Langmuir maximum adsorption capacity of NA-KP was 580.61 mg g^-1, which was superior to that of KP (297.15 mg g^-1). Furthermore, thermodynamic studies demonstrated the feasible, spontaneous, and endothermic nature of the adsorption process of MG by NA-KP. Importantly, NA-KP showed superior selectivity to KP towards cationic dye MG against anionic dye methyl orange (MO). When the molar ratio of MG/MO was 1:1, the separation factor (α_MG/MO) of NA-KP was 698.10, which was 5.93 times of KP. In addition, hydrogen bonding, π-π interactions, and electrostatic interaction played important roles during the MG adsorption process by NA-KP. This work provided a low-cost, eco-friendly, and efficient option for the selective removal of cationic dye from dyeing wastewater.

Fabrication of a corn stalk derived cellulose-based bio-adsorbent to remove Congo red from wastewater: Investigation on its ultra-high adsorption performance and mechanism

A cellulose-based bio-absorbent with various and plenty of amino groups was successfully prepared from corn stalk to achieve quantitative removal of Congo red from wastewater with wide pH values (5 ≤ pH ≤ 10). The maximum removal amount was 8.0 mmol·g^-1 (5572 mg·g^-1) under pH = 6.0 and 45 °C, which was obviously higher than reported absorbents. Investigation on dynamic adsorption and recyclability in authentic wastewater found that the removal efficiency of Congo red was >98 % within 180 min and decreased slightly in industrial water after five cycles, denoting this adsorbent with great potential for environmental application. The characterization results proved that 7.58 mmol·g^-1 of different amino groups (-NH₂, -NH- and -NR₂) were introduced on adsorbent surface by two steps of modification and were the major functional groups for adsorption of Congo red. The inferred adsorption mechanism revealed that Congo red could be adsorbed equivalently on the amino groups by strong electrostatic interactions or hydrogen bonds. Different amino groups played different roles in adsorption due to great differences in protonation ability in 5 ≤ pH ≤ 10. The study was expected to high-efficiently remove Congo red from acidic or alkaline wastewater, and offered an alternative strategy for biowaste treatment of corn stalks in a high value-added manner.

Facile synthesis of amino-functionalized magnetic materials for efficient enrichment of anionic metabolites from biological samples

The analysis of biological samples is often affected by the background matrix. Proper sample preparation is a critical step in the analytical procedure for complex samples. In this study, a simple and efficient enrichment strategy based on Amino-functionalized Polymer-Magnetic MicroParticles (NH₂-PMMPs) with coral-like porous structures was developed to enable the detection of 320 anionic metabolites, providing detailed coverage of phosphorylation metabolism. Among them, 102 polar phosphate metabolites including nucleotides, cyclic nucleotides, sugar nucleotides, phosphate sugars, and phosphates, were enriched and identified from serum, tissues, and cells. Furthermore, the detection of 34 previously unknown polar phosphate metabolites in serum samples demonstrates the advantages of this efficient enrichment method for mass spectrometric analysis. The limit of detections (LODs) were between 0.02 and 4 nmol/L for most anionic metabolites and its high sensitivity enabled the detection of 36 polar anion metabolites from 10 cell equivalent samples. This study has provided a promising tool for the efficient enrichment and analysis of anionic metabolites in biological samples with high sensitivity and broad coverage, facilitating the knowledge of the phosphorylation processes of life.

Influence of structure and functional group of modified kraft lignin on adsorption behavior of dye

Utilization of kraft lignin to produce bio-based adsorptive material for effective dye adsorption from industrial wastewater is essential to fulfilling the significant environmental protection needs. Lignin is the most abundant byproduct material with a chemical structure containing various functional groups. However, the complicated chemical structure makes it somewhat hydrophobic and incompatible, which limits its direct application as an adsorption material. Chemical modification is a common way to enhance lignin properties. In this work, the kraft lignin was modified through direct amination using Mannich reaction and oxidization followed by amination as new route of lignin modification. The prepared lignins, including aminated lignin (AL), oxidized lignin (OL), and aminated-oxidized lignin (AOL), as well as unmodified kraft lignin, were analyzed by Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), elemental analysis and ¹H-nuclear magnetic resonance measurements (¹HNMR). The adsorption behaviors of modified lignins for the malachite green in aqueous solution were investigated well and discussed, as well as the adsorption kinetics and thermodynamic equations. Compared with other aminated lignin (AL), the AOL displayed a high adsorption capacity of 99.1 % dye removal, due to its more effective functional groups. The change in structure and functional groups on the lignin molecules during oxidation and amination had no effect on its adsorption mechanisms. The adsorption process of malachite green on different kinds of lignin belongs to endothermic chemical adsorption, which mainly consists of monolayer adsorption. The modification of lignin through oxidation followed by amination process, afforded kraft lignin a broad potential application in the field of wastewater treatment.

Lignin/sodium alginate hydrogel for efficient removal of methylene blue

In this work, a class of bio-based hydrogels (LN-NH-SA hydrogel) were prepared from aminated lignin and sodium alginate. The physical and chemical properties of the LN-NH-SA hydrogel were fully characterized using field emission scanning electron microscopy, thermogravimetric analysis, fourier transform infrared spectroscopy, N₂ adsorption-desorption isotherms, and other techniques. LN-NH-SA hydrogels were tested for the adsorption of dyes (methyl orange and methylene blue). The LN-NH-SA@3 hydrogel showed better adsorption efficiency for MB with a maximum adsorption capacity of 388.81 mg·g^-1, a bio-based adsorbent with a high adsorption capacity. The adsorption process followed the pseudo-second-order model and fitted to the Freundlich isotherm equation. More importantly, LN-NH-SA@3 hydrogel maintained 87.64 % adsorption efficiency after 5 cycles. Overall, the proposed hydrogel with environmentally friendly and low cost is promising for the absorption of dye contamination.

Lignin microparticles-reinforced cellulose filter paper for simultaneous removal of emulsified oils and dyes

The presence of multiple pollutants in wastewater, often with complex interactions, poses a significant challenge for conventional membranes to effectively remove multiple pollutants simultaneously. Herein, a lignin microparticles-reinforced cellulose filter paper (FP@AL-LS-DA) was fabricated via an aldol condensation between lignin and cellulose filter paper and cross-linking with dopamine hydrochloride (DA), which showed desired rejection of oil-in-water emulsions and dyes. Characterizations revealed that the addition of lignin and DA effectively narrowed the pore size (from 4.45 μm to 2.01 μm) and enhanced the rigidity and stability of the cellulose filter paper, thus making it not easily damaged in the water environment and showing excellent tolerance to strong acid and high-salt environments. The oil-in-water emulsions removal efficiency was higher than 99 % even after ten times usage, and the oil flux was kept stable at 52.54 L·m^-2·h^-1, indicating that FP@AL-LS-DA had outstanding reusability and stability. Remarkably, FP@AL-LS-DA showed excellent removal efficiency (>99 %) for complex pollutants containing dyes and oil-in-water emulsions. In this work, we demonstrate a lignin microparticles-reinforced cellulose filter paper that is simple to prepare and can efficiently separate oil-in-water emulsions and remove dyes.

A magnetically recyclable lignin-based bio-adsorbent for efficient removal of Congo red from aqueous solution

It has been always attractive to design a sustainable bio-derived adsorbent based on industrial waste lignin for removing organic dyes from water. However, existing adsorbent strategies often lead to the difficulties in adsorbent separation and recycling. Herein, we report a novel magnetically recyclable bio-adsorbent of Mg(OH)₂/Fe₃O₄/PEI functionalized enzymatic lignin (EL) composite (EL-PEI@Fe₃O₄-Mg) for removing Congo red (CR) by Mannish reaction and hydrolysis-precipitation. The Mg(OH)₂ and PEI functionalized EL on the surface act as active sites for the removal of CR, while the Fe₃O₄ allows for the easy separation under the help of a magnet. As-obtained EL-PEI@Fe₃O₄-Mg forms flower-like spheres and has a relatively lager surface area of 24.8 m² g^-1 which is 6 times that of EL. The EL-PEI@Fe₃O₄-Mg exhibits a relatively high CR adsorption capacity of 74.7 mg g^-1 which is 15 times that of EL when initial concentration is around 100 mg L^-1. And it can be easily separated from water by applying an external magnetic field. Moreover, EL-PEI@Fe₃O₄-Mg shows an excellent anti-interference capability according to the results of pH values and salt ions influences. Importantly, EL-PEI@Fe₃O₄-Mg possesses a good reusability and a removal efficiency of 92 % for CR remains after five consecutive cycles. It is illustrated that electrostatic attraction, π-π interaction and hydrogen binding are primary mechanisms for the removal of CR onto EL-PEI@Fe₃O₄-Mg. This work provides a novel sustainable strategy for the development of highly efficient, easy separable, recyclability bio-derived adsorbents for removing organic dyes, boosting the efficient utilization of industrial waste lignin.

Eco-friendly and facile preparation of chitosan-based biofilms of novel acetoacetylated lignin for antioxidant and UV-shielding properties

The development of eco-friendly, sustainable, biodegradable, and biocompatible green biopolymer composites is becoming increasingly important. In this study, acetoacetylated lignin (ATL) was obtained via an eco-friendly, facile one-step synthesis reaction, and chitosan (CS)-containing ATL films (CSL) were prepared. The chemical structural analysis of ATL confirmed that the acetoacetyl groups were successfully grafted onto kraft lignin (KL). ATL with adequate acetoacetyl groups exhibited enhanced molecular weight and antioxidant and ultraviolet (UV)-shielding properties. In particular, ATL, with a half maximal inhibitory concentration (IC₅₀) of 23.8 μg·mL^-1, exhibited superior antioxidant activity than butylated hydroxytoluene (38.3 μg·mL^-1) and KL (50.0 μg·mL^-1). When ATL was incorporated into the CS solution to prepare biofilms, the antioxidant activity, UV-shielding property, water resistance, and thermal stability of the CSL greatly improved. Notably, the UV-A and UV-B shielding properties of the 2 % CSL were 130 % and 78 % higher than those of the pure CS film, respectively. Therefore, ATL designed with lignin-derived multifunctional properties has potential applications as an antioxidant and UV-shielding bio-additive and shows significant prospects in food packaging and biomedical applications.

Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study

Multifunctional lignin bio-based adsorbent, b-LMS, was obtained via inverse copolymerization in the suspension of acryloyl modified kraft lignin (K_fL-AA) and bio-based trimethylolpropane triacrylate (bio-TMPTA). Morphological and structural characterization of K_fL-AA and b-LMS was performed using BET, FTIR, Raman, NMR, TGA, SEM, and XPS techniques. The b-LMS microspheres with 253 ± 42 μm diameters, 69.4 m² g^-1 surface area, and 59% porosity efficiently adsorb Malachite Green (MG), Tartrazine (T), and Methyl Red (MR) dye. The influence of pH, pollutant concentration, temperature, and time on the removal efficiency was studied in a batch mode. Favorable and spontaneous processes with high adsorption capacities e.g. 116.8 mg g^-1 for MG, 86.8 mg g^-1 for T, and 68.6 mg g^-1 for MR indicate the significant adsorptive potential of b-LMS. Results from diffusional and single mass transfer resistance studies indicate that pore diffusion is a rate-limiting step. Theoretical calculations confirmed a higher affinity of b-LMS to cationic dye MG compared with an anionic and neutral one, i.e. T and MR, respectively. The data fitting from a flow system, using semi-empirical equations and Pore Surface Diffusion Modelling (PSDM) provided breakthrough point determination. The results from the desorption and competitive adsorption study proved the exceptional performance of b-LMS. Moreover, sulfation of b-LMS, i.e.production of b-LMS-OSO₃H, introduced high-affinity sulfate groups with respect to cationic dye and cations. Developed methodology implements the principle of sustainable development and offers concept whose results contribute to the minimization of environmental pollution.

Synthesis and Characterization of Thermally Stable Lignosulfonamides

Lignin, a highly aromatic macromolecule building plant cells, and cellulose are two of the most commonly occurring natural polymers. Lignosulfonate is a grade of technical lignin, obtained as a by-product in the paper and wood pulping industries, a result of the used lignin isolation method, i.e., sulfite process. In this work, sodium lignosulfonate is used as a starting material to manufacture sulfonamide derivatives of lignin in a two-step modification procedure. Since this direction of the lignin modification is rather rarely investigated and discussed, it makes a good starting point to expand the state of knowledge and explore the properties of lignosulfonamides. Materials obtained after modification underwent characterization by FTIR, SS-NMR, WAXD, SEM, and TGA. Spectroscopic measurements confirmed the incorporation of dihexylamine into the lignin structure and the formation of lignosulfonamide. The crystalline structure of the material was not affected by the modification procedure, as evidenced by the WAXD, with only minute morphological changes of the surface visible on the SEM imaging. The obtained materials were characterized by improved parameters of thermal stability in relation to the raw material. As-prepared sulfonamide lignin derivatives with a potential application as a filler in biopolymeric composites may become a new class of functional, value-added, sustainable additives.

Effective Removal of Methylene Blue on EuVO4/g-C3N4 Mesoporous Nanosheets via Coupling Adsorption and Photocatalysis

In this study, we first manufactured ultrathin g-C₃N₄ (CN) nanosheets by thermal etching and ultrasonic techniques. Then, EuVO₄ (EV) nanoparticles were loaded onto CN nanosheets to form EuVO₄/g-C₃N₄ heterojunctions (EVCs). The ultrathin and porous structure of the EVCs increased the specific surface area and reaction active sites. The formation of the heterostructure extended visible light absorption and accelerated the separation of charge carriers. These two factors were advantageous to promote the synergistic effect of adsorption and photocatalysis, and ultimately enhanced the adsorption capability and photocatalytic removal efficiency of methylene blue (MB). EVC-2 (2 wt% of EV) exhibited the highest adsorption and photocatalytic performance. Almost 100% of MB was eliminated via the adsorption–photocatalysis synergistic process over EVC-2. The MB adsorption capability of EVC-2 was 6.2 times that of CN, and the zero-orderreaction rate constant was 5 times that of CN. The MB adsorption on EVC-2 followed the pseudo second-order kinetics model and the adsorption isotherm data complied with the Langmuir isotherm model. The photocatalytic degradation data of MB on EVC-2 obeyed the zero-order kinetics equation in 0–10 min and abided by the first-order kinetics equation for10–30 min. This study provided a promising EVC heterojunctions with superior synergetic effect of adsorption and photocatalysis for the potential application in wastewater treatment.

Synergistic Treatment of Congo Red Dye with Heat Treated Low Rank Coal and Micro-Nano Bubbles

In this study, the adsorption method and micro-nano bubble (MNB) technology were combined to improve the efficiency of organic pollutant removal from dye wastewater. The adsorption properties of Congo red (CR) on raw coal and semi-coke (SC) with and without MNBs were studied. The mesoporosity of the coal strongly increased after the heat treatment, which was conducive to the adsorption of macromolecular organics, such as CR, and the specific surface area increased greatly from 2.787 m²/g to 80.512 m²/g. MNBs could improve the adsorption of both raw coal and SC under different pH levels, temperatures and dosages. With the use of MNBs, the adsorption capacity of SC reached 169.49 mg/g, which was much larger than that of the raw coal at 15.75 mg/g. The MNBs effectively reduced the adsorption time from 240 to 20 min. In addition, the MNBs could ensure the adsorbent maintained a good adsorption effect across a wide pH range. The removal rate was above 90% in an acidic environment and above 70% in an alkaline environment. MBs can effectively improve the rate of adsorption of pollutants by adsorbents. SC was obtained from low-rank coal through a rapid one-step heating treatment and was used as a kind of cheap adsorbent. The method is thus simple and easy to implement in the industrial context and has the potential for industrial promotion.