Source, occurrence, distribution, fate, and implications of microplastic pollutants in freshwater on environment: A critical review and way forward

A cost-effective and efficient fluorescence staining agent for the identification of microplastics in environmental samples and zebrafish (Danio rerio)

Microplastics (MPs) are recognized as a significant environmental hazardous material. Therefore, identifying and tracking microplastics are crucial to understand their harmfulness. Herein, we introduce (Z)-N'-(pyren-1-ylmethylene)pyrazine-2-carbohydrazide (PPC) as a cost-effective and efficient fluorescence staining agent. Unique properties of PPC, including aggregation-induced emission (AIE) and solvatochromism, were verified by spectroscopic studies and theoretical calculations. PPC selectively stained eight types of MPs with green fluorescence in water/tetrahydrofuran (THF) solution (97/3, v/v). Interestingly, only polyurethane (PU) was selectively stained both in green and blue channel using 50 % ethanol (EtOH) treatment. Moreover, with 30 % EtOH treatment, PU and polyethylene terephthalate (PET) were distinctly stained in the blue channel, highlighting their selective fluorescence. These results suggested that changes in solvent polarity induced by different EtOH amounts might alter the binding strength between PPC and MPs, resulting in varying fluorescence responses. In addition, the adsorption interaction of PPC to MPs was proposed, based on thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and non-covalent interaction (NCI) analysis. PPC could identify MPs without any influence in the size, aging and pH difference. Successfully, PPC could stain eight types of MPs and selectively PU and PET in artificial environmental samples like seawater, river water and soil. Moreover, PPC-labeled MPs could be tracked in biological system such as Danio rerio (zebrafish) to monitor the transit and accumulation of MPs. These results underscore the potential of PPC for efficient detection of MPs in environmental and biological systems.

Dual impacts of elevated pCO2 on the ecological effects induced by microplastics and nanoplastics: A study with Chlamydomonas reinhardtii

Aquatic organisms face increased complexity and severity when exposed to the combined stressors of climate change and micro- and nanoplastics (MNPs), as opposed to facing these stressors individually. This study examined the effects and underlying mechanisms of elevated pCO2, which leads to freshwater acidification, as well as amino-modified polystyrene MNPs (PS-NH2 MNPs) of varying sizes (5 μm, 300 nm, 80 nm), on Chlamydomonas reinhardtii under both individual and combined conditions. The results showed a size-dependent toxicity of PS MNPs, with the smaller nanoparticles (80 nm) causing greater toxic inhibition than the larger microparticles (5 μm and 300 nm), primarily attributed to oxidative stress-related cellular damage. In contrast, freshwater acidification (FA) appeared to promote the growth of C. reinhardtii, possibly by upregulating transcripts associated with energy metabolism. However, when C. reinhardtii was exposed to both FA and MNPs simultaneously, distinct toxic effects were observed. The co-exposure to FA and NPs induced the most severe oxidative stress, implying the greatest energetic cost. This stress resulted in the downregulation of pathways involved in fatty acid biosynthesis and protein folding, ultimately causing significant damage to cellular structure and function. The increased energy from the upregulation of the TCA cycle was mainly allocated for DNA damage repair and cell division, which induced an energy deficit necessary for stress resistance. In contrast, during co-exposure to FA and MPs, energy was redirected towards DNA replication and the synthesis of anti-stress substances, facilitating recovery and promoting growth. Our study highlighted the decisive influence of climate change and particle size in assessing the ecological effects and risks associated with MNPs.

Toxicity of microplastics polystyrene to freshwater planarians and the alleviative effects of anthocyanins

It is impossible to overlook the effects of microplastics (MPs) on aquatic organisms as they continuously accumulate in water environment. Freshwater planarians, which exist in the benthic zone of water bodies and come into contact with the deposited MPs particles, provide a highly representative model for studying the effects of MPs on aquatic organisms. Anthocyanins (ANTs) have gained significant popularity in recent years for their diverse health benefits. In the current study, the median lethal concentration (LC50) of polystyrene (PS) to planarian Dugesia japonica was determined for the first time. Based on this, multiple toxic effects of single PS and PS in combination with ANTs on planarians were explored. The results showed that PS exposure disrupted the redox homeostasis and induced oxidative damage in planarians. Also, PS stress affected the neuromorphology, aggravated cell apoptosis in planarians probably by altering neural gene expressions as well as promoting the expression of apoptosis-related genes while inhibiting stem cell marker genes. In addition, the results also suggested that co-exposure of ANTs could effectively alleviate the toxicity of PS on planarians. Particularly, long-term environmentally relevant concentration PS exposure exhibited a higher propensity for inducing toxicity on planarians than short-term high concentration acute exposure, indicating that the harm of environmental MPs to humans and wildlife exposed to them should not be underestimated. Therefore, considering the recently rising and rapid development of ecotoxicomics, more in-depth research on the toxicity mechanism of environmentally relevant concentration PS-MPs to freshwater planarians from multi-omics levels will be our future work.

Plastic debris exposure and effects in rivers: Boundaries for efficient ecological risk assessment

Until recently, plastic pollution research was focused on the marine environments, and attention was given to terrestrial and freshwater environments latter. This discussion paper aims to put forward crucial questions on issues that limit our ability to conduct reliable plastic ecological risk assessments in rivers. Previous studies highlighted the widespread presence of plastics in rivers, but the sources and levels of exposure remained matters of debate. Field measurements have been carried out on the concentration and composition of plastics in rivers, but greater homogeneity in the choice of plastic sizes, particularly for microplastics by following the recent ISO international standard nomenclature, is needed for better comparison between studies. The development of additional relevant sampling strategies that are suited to the specific characteristics of riverine environments is also needed. Similarly, we encourage the systematic real-time monitoring of environmental conditions (e.g., topology of the sampling section of the river, hydrology, volumetric flux and velocity, suspended matters concentration) to better understand the origin of variability in plastic concentrations in rivers. Furthermore, ingestion of microplastics by freshwater organisms has been demonstrated under laboratory conditions, but the long-term effects of continuous microplastic exposure in organisms are less well understood. This discussion paper encourages an integrative view of the issues involved in assessing plastic exposure and its effects on biota, in order to improve our ability to carry out relevant ecological risk assessments in river environments.

Assessment of microplastics and heavy metal contamination in surficial sediments of Pasig River, Philippines during wet season

This study investigates the contamination of microplastics (MPs) and heavy metals in surficial sediments of the Pasig River, Philippines, during the wet season. This season, marked by heightened rainfall, runoff, and stormwater flow, potentially enhances the dispersion and accumulation of pollutants, leading to elevated pollution levels. MPs and heavy metals pose significant threats to aquatic ecosystems and human health, and their accumulation in river sediments warrants urgent attention. Samples were collected from multiple sites along the river, focusing on sediment composition, to analyze MP abundance and heavy metal concentrations. Results revealed high concentrations of MPs, predominantly polyester, polyethylene and acrylonitrile-butadiene copolymer, and heavy metals which were significantly higher in urbanized areas. MPs were found at all sampling locations, ranging from 2700 to 28,250 particles per kilogram of sediments. Heavy metals in the sediments varied, with concentrations of Cd (<0.003 mg/kg), Pb (3.09-50.48 mg/kg), Zn (53.37-175.74 mg/kg), and Fe (11,629-25,687 mg/kg), in the order Fe > Zn > Pb > Cd. According to the Hong Kong-Interim Sediment Quality Values criteria, the sediments were not contaminated by Cd, Pb, and Zn. Correlations between MP abundance and metals were found to be moderate for Pb and Zn but low for Fe, suggesting complex pollution dynamics. These findings emphasize the need for comprehensive monitoring and targeted waste management strategies to address MPs and heavy metal pollution, particularly during the wet season. Identifying MPs polymer types and their possible pollution sources provides valuable data to mitigate sediment contamination and protect aquatic ecosystems and human health.

Comparison of different fragmentation techniques for the production of true-to-life microplastics

Microplastics are small plastic particles found widely in the environment, posing significant challenges as diverse environmental contaminants. Their pervasive presence and potential impacts on ecosystems and human health underscore the importance of research in this field. However, working with microplastics in the laboratory and field can be challenging due to the difficulty in creating particles that are similar to those found in the environment. The advancement of research in this area is, therefore, dependent on the availability of reference materials or representative test materials that can simulate real-world conditions. One of the biggest challenges in creating more relevant test microplastics is investigating processes that can mimic as close as possible the environmental counterpart. To tackle this challenge, we have explored three distinct cryogenic grinding techniques for generating microplastics on a laboratory scale (ultracentrifugal mill, immersion blender, mixer mill). The resulting products were examined, and the advantages and limitations of the technologies were analyzed to gain deeper insights into the correlation between the various techniques utilized and the distinctive characteristics of the "true-to-life" microplastics produced. This allows us to tailor the production of test materials to the specific research questions they are intended to address. Furthermore, by understanding the characteristics of true-to-life microplastics, we can gain insights into their behavior under various environmental conditions. This knowledge can help in developing better methods for detecting and monitoring microplastics in the environment, as well as developing more effective mitigation strategies to reduce their impact.

Investigation of microplastic pollution index in the urban surface water: A case study in west Godavari district, Andhra Pradesh, India

Microplastics (MPs) are a growing environmental issue because of their widespread prevalence and their long-term effects on ecosystems and human health. Global studies have identified MPs in various aquatic environments, such as lake, rivers, estuaries, wastewater, and oceans. Although most MPs originate from urban surface water sources, the specific intensity, characteristics, and associated risk assessments remain unclear. This study focuses on west Godavari region of India, specifically analyzing MPs in surface water samples Godavari River and two water treatment plants (WTPs). A total of 330 MPs found in the surface water and 121 MPs in theWTP. In surface water, MPs were predominantly blue and transparent fibers, with the majority measuring less than 500 μm in size. Conversely, at the WTP, larger MPs, primarily in blue fiber form and exceeding 3000 μm, were observed. Additionally, μ-Raman spectroscopy analysis identified the presence of various polymers, including PP, PVC, PC, Nylon, and PET, among others. The risks associated with MPs, including their concentration and chemical composition, were assessed across all sample types using various indices such as Contamination Factor (CFi), Pollution Load Index (PLI), Polymer Risk Index (H), Potential Ecological Risk Index (RI), and Estimated Intake (EI) (daily, annually, and lifetime). The risk assessment revealed that the type of polymer poses a greater risk of MP pollution than the concentrations of MPs themselves. These findings provide critical insights into MP contamination patterns and risks, emphasizing the need for targeted mitigation strategies in this region.

Microplastic and nanoplastic pollution: Assessing translocation, impact, and mitigation strategies in marine ecosystems

The widespread presence of plastic debris in marine ecosystems was first highlighted as a serious concern in the United Nations Convention on the Law of the Sea (UNCLOS) and the 1972 London Convention. This realization identified plastic pollution as one of the major global environmental issues. Majorities of plastic debris are neither recycled nor incinerated, as a result, it eventually makes its way into lakes, rivers, and oceans. Analysis of water and sediment worldwide indicates that microplastics and nanoplastic are ubiquitous in soils, freshwater, and marine ecosystems. Microplastic and nanoplastics are distributed throughout marine environments via processes such as biofouling and chemical leaching, contaminating both pelagic and benthic species. Despite growing recognition of the hazards posed by microplastics and nanoplastics, regulatory efforts remain hampered by limited understanding of their broader ecological impacts, particularly how diverse factors translate into population declines and ecosystem disruptions. This review examines the pathways of microplastic and nanoplastic pollution, their interactions with other environmental stressors such as climate change and chemical pollution, and their effects on marine food webs. The review highlights the urgent need for further research into the behavior and fate of nanoplastics, which are the degradation product of microplastics, owing to their nano size they pose additional risks, unique properties, and potential for widespread ecological impacts. Studies have demonstrated that smaller microplastics and nanoplastics, particularly nanoplastics, are more toxic than larger microplastics. Additionally, microplastics and nanoplastics serve as vectors for contaminants such as heavy metals, exacerbating their toxicity. They also translocate through marine food chains, posing potential health risks. While evidence of their impact continues to grow, the chronic toxicity of microplastics and nanoplastics remains poorly understood, emphasizing the need for further research, particularly at the cellular level, to fully understand their effects on marine ecosystems and human health. This review also concludes with a call for standardized measurement methods, effective mitigation strategies, and enhanced international cooperation to combat this escalating threat. Future research should prioritize the complex interactions between microplastics and nanoplastics, other pollutants, and marine ecosystems, with the ultimate goal of developing holistic approaches to manage and mitigate the impact of plastic pollution. PRACTITIONER POINTS: Microplastic/nanoplastic translocate through marine food webs, affecting species and human health. Nanoplastics are more toxic than microplastics, exacerbating environmental risks. Nanoplastic aggregation influences their distribution and ecological interactions. Future research should focus on nanoplastic behavior, transport, and toxicity.

Hazard assessment of airborne and foodborne biodegradable polyhydroxyalkanoates microplastics and non-biodegradable polypropylene microplastics

Microplastics (MP) are ubiquitous in the environment, and are toxic to various living organisms. Proper application of biodegradable plastics may alleviate the hazards of conventional non-biodegradable plastics. In the current study, multi-omics analyses were performed to compare the biodegradable polyhydroxyalkanoates (PHA) and non-biodegradable polypropylene (PP) MP for their toxicity on mouse liver and lung. Airborne PHA MP induced nasal microbiome dysbiosis, pulmonary microbiome alteration, pulmonary and serum metabolome disruption, and hepatic transcriptome disturbances, resulting in mild pulmonary toxicity. By contrast, airborne PP MP caused greater alterations in nasal and pulmonary microbiome, pulmonary and serum metabolome, and hepatic transcriptome, resulting in pulmonary and hepatic toxicity. Both foodborne PHA and PP MP caused intestinal microbiome dysbiosis, while foodborne PHA MP caused slighter intestinal and serum metabolome disruption, hepatic transcriptome disturbances and hepatotoxicity (e.g., lower serum aspartate aminotransferase and alanine aminotransferase) compared to foodborne PP MP. Some potential differential biomarkers were determined between PP and PHA MP exposures, i.e., nasal Allobaculum and pulmonary Alloprevotella for airborne PHA; nasal Lactobacillus and pulmonary Acinetobacter for airborne PP; intestinal Faecalibacterium for foodborne PHA; and intestinal unclassified_Erysipelatoclostridiaceae for foodborne PP. The results show that PHA MP can induce less pulmonary and hepatic toxicity compared to PP MP, suggesting PHA is a potential substitution for PP. The findings can benefit the hazard assessment of airborne and foodborne PHA and PP MP.

The combined effects of microplastics and their additives on mangrove system: From the sinks to the sources of carbon

Mangrove ecosystems, a type of blue carbon ecosystems (BCEs), are vital to the global carbon cycle. However, the combined effects of microplastics (MPs) and plastic additives on carbon sequestration (CS) in mangroves remain unclear. Here, we comprehensively review the sources, occurrence, and environmental behaviors of MPs and representative plastic additives in mangrove ecosystems, including flame retardants, such as polybrominated diphenyl ethers (PBDEs), and plasticizers, such as phthalate esters (PAEs). Mangrove ecosystems have a complex influence on the behaviors of MPs and additives. Under the action of natural and unnatural factors, these pollutants exhibit complex behaviors including migration, interception, deposition and transformation, that are closely linked to those of particulate carbon, particularly carbon sequestration processes. MPs and additives hinder the CS function of mangroves by harming the growth of flora and fauna, influencing microbial nitrogen and sulfur cycles, and enhancing the degradation of organic matter in the sediment. The increasing accumulation and widespread occurrence of MPs and additives will greatly influence the carbon cycle. Future work is encouraged on systematic investigation of new alternatives to plastics and additives, and research methods to uncover the impact mechanisms of MPs and additives on BCEs. The developments of management measures and engineering technologies are also required to enhance pollutant control and mangrove CS.

Pollution status of microplastics in the sediments of warm monomictic Dal lake, India: Abundance, composition, and risk assessment

This report presents the first investigation of microplastic (MP) contamination in the shoreline sediments of Dal Lake, Jammu and Kashmir, India. The MP concentrations ranged from 503 to 3154 MP/kg, with a notable seasonal variation. The highest concentrations of microplastics occurred in the Spring, ranging from 467 to 3445 MP/kg. Microplastics were identified using optical microscopy, Fourier Transform Infrared spectroscopy, and thermogravimetric analysis. Polymer analysis revealed that the Gagribal basin was contaminated with polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC), polyamide (PA), and polyethylene terephthalate (PET). In contrast, the Nigeen basin mainly comprises PE, PP, and PS. The significantly elevated Polymer Hazard Index (PHI) values, exceeding 1000 in the Gagribal basin, were attributed to the presence of PVC. Sediment quality was assessed using Pollution Load Index (PLI), Potential Ecological Risk Index (PERI), and PHI. Health risk metrics, such as estimated daily intake (EDI) and microplastic carcinogenic risks (MPCR), were also evaluated. There is a positive correlation between microplastic abundance and total organic carbon (TOC), total phosphorus (TP), and total nitrogen (TN). The Nigeen basin, characterized by a higher proportion of less hazardous polymers like PP, exhibited greater TOC levels due to enhanced microbial degradation of microplastics. Conversely, the Gagribal basin, with its higher presence of toxic polymers like PVC, had lower TOC levels, likely due to these compounds' inhibition of microbial activity. This study provides crucial insight into the spatial distribution and ecological impact of MPs in Dal Lake, setting the stage for future research on their effects on aquatic ecosystems.

Activated hedgehog and insulin ligands by decreased transcriptional factor DAF-16 mediate transgenerational nanoplastic toxicity in Caenorhabditis elegans

In Caenorhabditis elegans, transcriptional factor DAF-16 in insulin signaling pathway played important role in regulating transgenerational nanoplastic toxicity. Activation of insulin signals mediated transgenerational toxicity of polystyrene nanoparticle (PS-NP) by inhibiting DAF-16. Among identified germline ligands, expression of wrt-3 encoding hedgehog ligand was increased by RNAi of daf-16 in PS-NP exposed C. elegans. In PS-NP exposed C. elegans, expressions of 4 other germline hedgehog ligand genes and 10 hedgehog receptor genes were increased by daf-16 RNAi. Among these candidate genes, expressions of hedgehog ligand genes (grl-15, grl-16, qua-1, and wrt-1) and hedgehog receptor genes (ptr-23, scp-1, ptd-2, and ncr-1) could be increased by PS-NP (1-100 μg/L), and their transgenerational expressions were observed after PS-NP exposure. RNAi of grl-15, grl-16, qua-1, wrt-1, ptr-23, scp-1, ptd-2, and ncr-1 caused resistance to transgenerational PS-NP toxicity. In nematodes exposed to PS-NPs, RNAi of wrt-3, grl-15, grl-16, qua-1, and wrt-1 at parental generation (P0-G) inhibited expressions of ptr-23, scp-1, ptd-2, and ncr-1 in their offspring. Moreover, we observed increased expressions of insulin peptides genes (ins-3, ins-39, and daf-28) in PS-NP exposed daf-16(RNAi) nematodes, suggesting formation of feedback loop. We raise the molecular basis for formation of toxicity on multiple generations after nanoplastic exposure at P0-G.

Bioaccumulation and biochemical impact of polyethylene terephthalate microplastics in Cipangopaludina chinensis: Tissue-specific analysis and homeostasis disruption

Microplastics are a novel pollutant that adversely affect freshwater benthic organisms. However, few studies have investigated the mechanism underlying the bioaccumulation and the toxicity of microplastics. In this study, microplastics bioaccumulation of wild Cipangopaludina chinensis in the Songhua River were utilized, and a 28-day aquatic toxicity test was performed to determine the effects of exposure to polyethylene terephthalate (PET), the bioaccumulation of PET, and changes in multiple biomarkers in the muscle, gill, and kidney tissues. The concentration pattern of microplastics was as follows: kidney tissue > muscle tissue > gill tissue. Microplastic ingestion caused AChE inhibition led to significant increases in redox and energy metabolism indicators. Furthermore, the IBR analysis presented a "response-resistance-breakdown" process, indicating that Cipangopaludina chinensis possessed resistance with time (D14 and D21) and concentration (0.10 mg/L and 1.00 mg/L) thresholds. Tissue sensitivity to microplastics was ranked as gill > muscle > kidney, which was the opposite order of microplastic accumulation. These findings implied that less sensitive tissues stored a larger amount of pollutants, suggesting a reduction in tissue sensitivity to microplastics with higher microplastic occurrence rates. This study provides new insights into biological resistance to pollutant stress, warranting further investigation into the underlying mechanisms.

Recycle or Not? An Exploration of Microplastic Generation During Plastic Processing via a Local Case Study

Microplastic (MP), an emerging pollutant, has been identified as a critical target in tackling plastic pollution. Although a plethora of studies have explored MP generation from various sources, limited attention has been paid to plastic processing. This study investigated MP (10 μm-5 mm) generation in virgin and waste plastic extrusion processing. MPs at a density of 2.13 × 105-9.79 × 107 (approximately 0.01-10.85 g) were generated when processing 1 t of plastic. Feedstock sources, polymer types, and pelletizing techniques were found to influence the process. With a moderate weight (270.58-527.34 t) but enormous amount (1.34 × 1016-2.63 × 1016) of MPs generated globally in 2022, plastic processing is an underestimated but vital source of MPs, emphasizing the need for MP inspection and appropriate removal technologies in the industry, especially for virgin plastic processing and water ring pelletizing. Further simulation indicated that up to 84.35% of MPs could be removed using commonly available materials in the investigated plastic processing facility, with a higher removal efficiency for larger-sized particles. In this regard, plastic recycling was superior to virgin plastic processing with fewer and larger-sized MPs generated, which could facilitate MP removal and should be fostered.

The difference between tire wear particles and polyethylene microplastics in stormwater filtration systems: Perspectives from aging process, conventional pollutants removal and microbial communities

Tire wear particles (TWPs) in stormwater runoff have been widely detected and were generally classified into microplastics (MPs). TWPs and conventional MPs can be intercepted and accumulated in stormwater filtration systems, but their impacts on filtration, adsorption and microbial degradation processes of conventional pollutants (organic matters, nitrate and ammonium) have not been clarified. TWPs are different from MPs in surface feature, chemical components, adsorption ability and leaching of additives, which might lead to their different impacts on conventional pollutants removal. In this study, five different levels of aged polyethylene MPs (PEMPs) and aged TWPs contamination in stormwater filtration systems were simulated using thirty-three filtration columns. Results showed that ultraviolet aging treatment was less influential for the aging of TWPs than that of PEMPs, the specific surface area of aged PEMPs (1.603 m2/g) was over two times of unaged TWPs (0.728 m2/g) in the same size. Aged PEMPs and aged TWPs had different impacts on conventional pollutants removal performance and microbial communities, and the difference might be enlarged with exposure duration. The intensified aged PEMPs contamination generally promoted conventional pollutants removal, whereas aged TWPs showed an opposite trend. Mild contamination (0.01% and 0.1%, wt%) of aged PEMP/TWPs was beneficial to the richness and diversity of microbial communities, whereas higher contamination of aged PEMPs/TWPs was harmful. Aged PEMPs and TWPs had different impact on microbial community structure. Overall, the study found that TWPs were more detrimental than PEMPs in filtration systems. The research underscores the need for more comprehensive investigation into the occurrence, effects and management strategies of TWPs, as well as the importance of distinguishing between TWPs and MPs in future studies.

On the nature and sources of microplastics (MPs) and microrubbers (MRs) in urban snow

This work reports a characterization of microplastics (MPs) and microrubbers (MRs) such as color, size, shape, and the chemical composition in snowfall in central Iran (Qom) at five sites. Identification of MPs and MRs involved using a stereo microscope to evaluate physical characteristics such as thickness, shininess, hardness, and reaction to a hot needle. HYSPLIT trajectory and end-member microplastic (PM) mixing models are used to determine the contribution of local and remote sources to MPs. The mean (±SD) abundance of MPs and MRs is 23.8 ± 15.87 (MP/L) and 1.26 ± 1.16 (MR/L), respectively, whereas the mean (±SD) abundance of MPs and MRs is 30.7 ± 19.36 (MP/m2) and 1.58 ± 1.39 (MR/m2), respectively. The frequency of MP colors in order are: black (63.8%) > red (12.8%) > blue (11 %) > white (9.1%) > green (2.1%) > yellow (1.3%). About 71.6% and 3.6% of the identified MPs are 250-500 μm and >1000 μm, respectively. Snow samples contain different identified polymers such as polyethylene terephthalate (PET), nylon, viscose, polypropylene (PP), polyethylene (PE), polystyrene (PS), and polyvinyl chloride (PVC). Analysis reveals that 90% of Qom city's snowy day winds come from local sources. The high MP levels in are due to human activities from local origins according to end-member MP mixing model. Further study is needed to understand the potential impacts of MPs and MRs on ecosystems and human health.

Micro/nano plastics in the urinary system: Pathways, mechanisms, and health risks

Micro/Nano plastics (MNPs) pollutants are widespread in the environment, raising significant concerns about their biosafety. Emerging studies indicate that the urinary system is a primary accumulation site for MNPs, leading to severe tissue and functional damage. This review aims to summarize recent research on the potential hazards that MNPs may pose to the urinary system, highlighting the mechanisms of toxicity and the current state of knowledge. Studies have shown that MNPs enter the human body through drinking water, the food chain, inhalation, and skin contact. They may penetrate the bloodstream via the digestive, respiratory, and skin systems, subsequently dispersing to various organs, including the urinary system. The potential accumulation of MNPs in the urinary system might induce cellular oxidative stress, inflammation, apoptosis, autophagy, the "intestine-kidney axis", and other possible toxic mechanisms. These processes could disrupt kidney metabolic functions and promote tissue fibrosis, thereby potentially increasing the risk of urinary system diseases. Despite ongoing research, the understanding of MNPs' impact on the urinary system remains limited. Therefore, this review provides a comprehensive overview of MNPs' potential toxicity mechanisms in the urinary system, highlights key challenges, and outlines future research directions. It offers a theoretical basis for the development of effective protective measures and policies.

Microplastics in ecosystems: Critical review of occurrence, distribution, toxicity, fate, transport, and advances in experimental and computational studies in surface and subsurface water

Microplastics (MPs), particles under 5 mm, pervade water, soil, sediment, and air due to increased plastic production and improper disposal, posing global environmental and health risks. Examining their distribution, quantities, fate, and transport is crucial for effective management. Several studies have explored MPs' sources, distribution, transport, and biological impacts, primarily focusing on the marine environment. However, there is a need for a comprehensive review of all environmental systems together for enhanced pollution control. This review critically examines the occurrence, distribution, fate, and transport of MPs in the following environments: freshwater, marine, and terrestrial ecosystems. The concentration of MPs is highly variable in the environment, ranging from negligible to significant amounts (0.003-519.223 items/liter in water and 0-18,000 items/kg dry weight sediment, respectively). Predominantly, these MPs manifest as fibers and fragments, with primary polymer types including polypropylene, polystyrene, polyethylene, and polyethylene terephthalate. A complex interplay of natural and anthropogenic actions, including wastewater treatment plant discharges, precipitation, stormwater runoff, inadequate plastic waste management, and biosolid applications, influences MPs' presence and distribution. Our critical synthesis of existing literature underscores the significance of factors such as wind, water flow rates, settling velocities, wave characteristics, plastic morphology, density, and size in determining MPs' transport dynamics in surface and subsurface waters. Furthermore, this review identifies research gaps, both in experimental and simulation, and outlines pivotal avenues for future exploration in the realm of MPs.

Microplastics in water resources: Global pollution circle, possible technological solutions, legislations, and future horizon

Beneath the surface of our ecosystems, microplastics (MPs) silently loom as a significant threat. These minuscule pollutants, invisible to the naked eye, wreak havoc on living organisms and disrupt the delicate balance of our environment. As we delve into a trove of data and reports, a troubling narrative unfolds: MPs pose a grave risk to both health and food chains with their diverse compositions and chemical characteristics. Nevertheless, the peril extends further. MPs infiltrate the environment and intertwine with other pollutants. Worldwide, microplastic levels fluctuate dramatically, ranging from 0.001 to 140 particles.m-3 in water and 0.2 to 8766 particles.g-1 in sediment, painting a stark picture of pervasive pollution. Coastal and marine ecosystems bear the brunt, with each organism laden with thousands of microplastic particles. MPs possess a remarkable ability to absorb a plethora of contaminants, and their environmental behavior is influenced by factors such as molecular weight and pH. Reported adsorption capacities of MPs vary greatly, spanning from 0.001 to 12,700 μg·g-1. These distressing figures serve as a clarion call, demanding immediate action and heightened environmental consciousness. Legislation, innovation, and sustainable practices stand as indispensable defenses against this encroaching menace. Grasping the intricate interplay between microplastics and pollutants is paramount, guiding us toward effective mitigation strategies and preserving our health ecosystems.

Can microplastic contamination affect the wing morphology and wingbeat frequency of Aedes aegypti (Diptera: Culicidae) mosquitoes?

Microplastics (MPs) are increasingly widespread in the environment, which raises questions about their potential effects at different biological levels. It is essential to assess the impacts on biodiversity, and it is also crucial to understand whether the presence of MPs can interfere with the biological traits of species of relevance in public health. Considering that the life-history traits of mosquitoes, such as size and the wingbeat frequency (WBF), are related to its vector competence, here, we study the effects of 106 particles L-1 (as expected concentration of MPs on the environment, using the polyethylene type) on WBF, as well as wing morphology, testing the Culicidae species found across all continents, Aedes aegypti, as an indicator. Results show that larvae survival and development were not affected by the tested concentration of MP. Geometric morphometrics showed some asymmetry in female mosquito wings, which were also smaller for individuals reared in MP suspension. As for WBF, results did not indicate any significant differences between females. Male mosquitoes, however, showed alterations in WBF and wing morphology, suggesting possible sex-specific reactions to microplastic exposure. Also, the combination of morphological parameters analyzed as covariates (wing centroid size and body weight) did not significantly affect WBF for both female and male mosquitoes. Overall, this study shows an inaugural investigation of the effects of MP on wing size and WBF on Ae. aegypti, shedding light on these parameters tested for a current pollution issue and its impact on a virus vector.

Polylactic acid microplastics cause transgenerational reproductive toxicity associated with activation of insulin and hedgehog ligands in C. elegans

As a member of biodegradable plastics, exposure risk of polylactic acid microplastic (PLA-MP) has received attention recently. Toxicity of PLA-MP at parental generation (P0-G) has been observed in some organisms; however, its possible transgenerational toxicity and underlying mechanisms remain unclear. In Caenorhabditis elegans, 10 and 100 μg/L PLA-MP resulted in transgenerational inhibition in reproductive capacity and transgenerational damage on gonad development. Meanwhile, transgenerational increase in germline apoptosis was detected after PLA-MP exposure at P0-G, which was associated with transgenerational dysregulation in expressions of genes governing apoptosis (ced-3, ced-4, egl-1, and ced-9) and DNA damage related genes (cep-1, mrt-2, hus-1, and clk-2). Among secreted ligand genes, PLA-MP exposure induced transgenerational increase in expression of ins-39 and wrt-3, and RNAi of ins-39 and wrt-3 inhibited germline apoptosis in PLA-MP exposed nematodes. Additionally, PLA-MP caused transgenerational increase in expression of met-2 and set-6 encoding histone methylation transferases, and germline apoptosis induced by PLA-MP could be suppressed by RNAi of met-2 and set-6. Dysregulated expressions of some apoptosis and DNA damage related genes caused by PLA-MP were reversed by RNAi of ins-39, wrt-3, met-2, and set-6. Moreover, in PLA-MP exposed animals, expression of ins-39 and wrt-3 could be further inhibited by RNAi of met-2 and set-6. Therefore, PLA-MP potentially induced reproductive toxicity across multiple generations, which was under the control of MET-2 and SET-6 activated ligands of INS-39 and WRT-3.

A critical review of microplastics in aquatic ecosystems: Degradation mechanisms and removing strategies

Plastic waste discarded into aquatic environments gradually degrades into smaller fragments, known as microplastics (MPs), which range in size from 0.05 to 5 mm. The ubiquity of MPs poses a significant threat to aquatic ecosystems and, by extension, human health, as these particles are ingested by various marine organisms including zooplankton, crustaceans, and fish, eventually entering the human food chain. This contamination threatens the entire ecological balance, encompassing food safety and the health of aquatic systems. Consequently, developing effective MP removal technologies has emerged as a critical area of research. Here, we summarize the mechanisms and recently reported strategies for removing MPs from aquatic ecosystems. Strategies combining physical and chemical pretreatments with microbial degradation have shown promise in decomposing MPs. Microorganisms such as bacteria, fungi, algae, and specific enzymes are being leveraged in MP remediation efforts. Recent advancements have focused on innovative methods such as membrane bioreactors, synthetic biology, organosilane-based techniques, biofilm-mediated remediation, and nanomaterial-enabled strategies, with nano-enabled technologies demonstrating substantial potential to enhance MP removal efficiency. This review aims to stimulate further innovation in effective MP removal methods, promoting environmental and social well-being.

Nanoplastic at environmentally relevant concentrations induces toxicity across multiple generations associated with inhibition in germline G protein-coupled receptor CED-1 in Caenorhabditis elegans

Nanoplastics at environmentally relevant concentrations (ERCs) could cause transgenerational toxicity on organisms. Caenorhabditis elegans is an important model for the study of transgenerational toxicology of pollutants. Nevertheless, the underlying mechanisms for the control of transgenerational nanoplastic toxicity by germline signals remain largely unclear. In C. elegans, exposure to 1-100 μg/L polystyrene nanoparticle (PS-NP) decreased expression of germline ced-1 encoding a G protein-coupled receptor at parental generation (P0-G). After PS-NP exposure at P0-G, transgenerational decrease in germline ced-1 expression could be detected. Meanwhile, the susceptibility to transgenerational PS-NP toxicity was observed in ced-1(RNAi) animals. After PS-NP exposure at P0-G, germline RNAi of ced-1 increased expressions of met-2 and set-6 encoding histone methylation transferases. The susceptibility of ced-1(RNAi) to transgenerational PS-NP toxicity could be inhibited by RNAi of met-2 and set-6. Moreover, in PS-NP exposed met-2(RNAi) and set-6(RNAi) nematodes, expressions of ins-39, wrt-3, and/or efn-3 encoding secreted ligands were decreased. Therefore, our results demonstrated that inhibition in germline CED-1 mediated the toxicity induction of nanoplastics at ERCs across multiple generations in nematodes.

Membrane filter removal in FTIR spectra through dictionary learning for exploring explainable environmental microplastic analysis

Microplastic analysis is a crucial step for locating the environmental contamination sources and controlling plastic contamination. A popular tool like Fourier transform infrared (FTIR) spectroscopy is capable of identifying plastic types and can be carried out through a variety of containers. Unfortunately, sample collection from water sources like rivers usually involves filtration so the measurements inevitably include the membrane filter that also has its own FTIR characteristic bands. Furthermore, when plastic particles are small, the membrane filter's spectrum may overwhelm the desired plastics' spectrum. In this study, we proposed a novel preprocessing method based on the dictionary learning technique for decomposing the variations within the acquired FTIR spectra and capturing the membrane filter's characteristic bands for the effective removal of these unwanted signals. We break down the plastic analysis task into two subtasks - membrane filter removal and plastic classification - to increase the explainability of the method. In the experiments, our method demonstrates a 1.5-fold improvement compared with baseline, and yields comparable results compared to other state-of-the-art methods such as UNet when applied to noisy spectra with low signal-to-noise ratio (SNR), but offers explainability, a crucial quality that is missing in other state-of-the-art methods. The limitations of the method are studied by testing against generated spectra with different levels of noise, with SNR ranging from 0 to - 30dB, as well as samples collected from the lab. The components/atoms learned from the dictionary learning technique are also scrutinized to describe the explainability and demonstrate the effectiveness of our proposed method in practical applications.

Microplastic pollution in surface sediments of Coromandel coastline, South-East Coast, India: Diversity index, carbonyl index, pollution load index, risk fraction and MPs inventory

The investigation along the Coromandel coastline of South-east India focused on assessing microplastics abundance using Simpson's diversity index (DIMP), Degradation-carbonyl index (DgCIMP), Pollution load index (PLIMP) and Ecological risk fraction (RfMP). These indices evaluated the dissemination and transportation of MPs across a 1076 km stretch divided into five zones from Chennai to Kanyakumari. During the wet season, average microplastics abundance (101 ± 36.6 items/kg dw) was lower compared to the dry season (143 ± 56.2 items/kg dw). Notably, 54% and 45% of microplastics were found in the 0.1-0.5 mm size range, with 45% and 64% being colored microplastics, and 80% and 71% being fibers during the wet and dry seasons respectively. Micro-Fourier-transform infrared spectroscopy (μFTIR) analysis showed rayon (34%) and PE (64%) dominance in ports and estuaries during both seasons. Kottaipattinam Port exhibited higher diversity indices (DIMPsh=0.56,DIMPsz=0.66,DIMPco=0.50andDIMPpo=0.65) compared to other zones, with an overall diversity index IDIMP of 0.57. Notably, among the DgCIMP values (n = 96), only 12 fell within the moderate photo-chemical oxidation range (0.16-0.35), while the majority (n = 60) surpassed 0.35 indicating higher oxidation levels, with some (n = 24) exceeding 0.50, signifying extreme oxidation. PLIMP revealed that 42% of sampling stations had very low to negligible MP contamination levels in ports and estuaries. However, ecological risk fraction RfMP values ranged from 10.2 to 13,670, with 27% of values exceeding 1500, indicating higher coastal ecological risk in 13 sampling stations.

Exposure to polyethylene microplastics exacerbate inflammatory bowel disease tightly associated with intestinal gut microflora

Polyethylene microplastics (PE MPs) have sparked widespread concern about their possible health implications because of their abundance, pervasiveness in the environment and in our daily life. Multiple investigations have shown that a high dosage of PE MPs may adversely impact gastrointestinal health. In tandem with the rising prevalence of Inflammatory bowel disease (IBD) in recent decades, global plastic manufacturing has risen to more than 300 million tons per year, resulting in a build-up of plastic by-products such as PE MPs in our surroundings. We have explored current advancements in the effect PE MPs on IBD in this review. Furthermore, we compared and summarized the detrimental roles of PE MPs in gut microbiota of different organisms viz., earthworms, super worm's larvae, yellow mealworms, brine shrimp, spring tails, tilapia, gilt-head bream, crucian carp, zebrafish, juvenile yellow perch, European sea bass, c57BL/6 mice and human. According to this review, PE MPs played a significant role in decreasing the diversity of gut microbiota of above-mentioned species which leads to the development of IBD and causes severe intestinal inflammation. Finally, we pinpoint significant scientific gaps, such as the movement of such hazardous PE MPs and the accompanying microbial ecosystems and propose prospective research directions.

ZIF-8 functionalized S-tapered fiber-optic sensor for polystyrene nanoplastics detection by electrostatic adsorption

Microplastic (MP) residues in marine have become an increasingly serious environmental pollution issue, and in recent years the detection of MPs in marine started to attract worldwide research interests. Optical-fiber-based environmental sensors have been extensively employed for their several merits such as high sensitivity, pressure resistance, compactness and ease of constructing communication networks. However, fiber-optic refractive index sensors are not specifically developed for distinguishing MPs from other inorganic particles suspended in water. In this paper, an metal-organic framework (MOF) ZIF-8 functionalized S-tapered fiber (STF) sensor is proposed for specific detection of polystyrene nanoplastics (PSNPs) in aqueous environment. ZIF-8 coordination nanoporous polymers with different film thickness were immobilized over the surface of the fabricated STF structure based on self-growth technique and yielding a large surface area over the sensor surface. High sensitivity detection can be achieved by converting the concentration perturbation of PSNPs into evanescent waves over the ZIF-8 functionalized STF surface through the strong electrostatic adsorption effect and π-π stacking, while the fabricated sensor is insensitive to gravels with silica as the primary component in water. It is found that the proposed detector with 18 film layers achieves a sensitivity up to 114.1353nm/%(w/v) for the PSNPs concentration range of 0.01 %(w/v) to 0.08 %(w/v).

Comparison of Transgenerational Neurotoxicity between Pristine and Amino-Modified Nanoplastics in C. elegans

Increasing evidence has suggested that nanoplastic pollution has become a global concern. More importantly, transgenerational toxicity can be induced by nanoplastics at predicted environmentally relevant doses (ERDs). Considering that amino modification could increase nanoplastic toxicity, we compared transgenerational neurotoxicity between pristine polystyrene nanoparticle (PS-NP) and amino-modified PS-NP (NH2-PS-NP) in Caenorhabditis elegans. At 0.1-10 μg/L, NH2-PS-NP caused more severe transgenerational toxicity on locomotion and neuronal development. Accompanied with a difference in transgenerational neuronal damage, compared to PS-NP (10 μg/L), NH2-PS-NP (10 μg/L) induced more severe transgenerational activation of mec-4, crt-1, itr-1, and tra-3, which are required for the induction of neurodegeneration. Moreover, NH2-PS-NP (10 μg/L) caused more severe transgenerational inhibition in expressions of mpk-1, jnk-1, dbl-1, and daf-7 than PS-NP (10 μg/L), and RNA interference (RNAi) of these genes conferred susceptibility to the toxicity of PS-NP and NH2-PS-NP on locomotion and neuronal development. NH2-PS-NP (10 μg/L) further caused more severe transgenerational activation of germline ligand genes (ins-3, ins-39, daf-28, lin-44, egl-17, efn-3, and lag-2) than PS-NP (10 μg/L), and RNAi of these ligand genes caused resistance to the toxicity of PS-NP and NH2-PS-NP on locomotion and neuronal development. Our results highlighted more severe exposure risk of amino-modified nanoplastics at ERDs in causing transgenerational neurotoxicity in organisms.

Pollution of Beach Sands of the Ob River (Western Siberia) with Microplastics and Persistent Organic Pollutants

Microplastics (MPs) in aquatic environments can be associated with various substances, including persistent organic pollutants, which add to the problem of plastic ecotoxicity. The abundance of 1-5 mm microplastics and concentrations of particle-adsorbed organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) in sandy sediments from three beaches in recreational areas along the upper Ob River in Western Siberia were assessed. MP pollution levels in the Ob River beach sands ranged from 24 ± 20.7 to 104 ± 46.2 items m-2 or, in terms of mass concentration, from 0.26 ± 0.21 to 1.22 ± 0.39 mg m-2. The average abundance of MP particles reached 0.67 ± 0.58 items kg-1 or 8.22 ± 6.13 μg kg-1 in the studied sediments. MP concentrations were significantly higher in number (p < 0.05) and mass (p < 0.01) at the riverbank site downstream of the Novosibirsk wastewater treatment plant (WWTP) outfall compared to these at the upstream and more distant beaches. Most MPs (70-100%) were represented by irregularly shaped fragments. The polymer composition of MPs varied between sites, with a general predominance of polyethylene (PE). The study revealed associations of MPs with PCBs and OCPs not previously detected in the riverbed and beach sediments, suggesting that these substances are circulating in the Ob River basin. Although MP concentrations were higher downstream of the WWTP, the maximum levels of particle-associated OCPs were observed in the beach sands of the site farthest from the urban agglomeration. The pesticides γ-HCH, 4,4-DDT, and 4,4-DDE were detected on MPs at relatively low concentrations. PCBs were more abundant in the studied samples, including 118 dioxin-like congener. The results obtained indicate that the Ob River is susceptible to plastic and persistent organic pollutant (POP) contamination and serve as a starting point for further studies and practical solutions to the problem.

Microplastic pollution and ecological risk assessment of a pond ecosystem

Microplastic (MP) pollution has been observed in various ecosystems as a result of the rapid increase in plastic production over the past half-century. Nevertheless, the extent of MP pollution in different ecosystems, particularly in freshwater ecosystems, has not been well-studied, and there are limited investigations on this particular topic, specifically in Türkiye. Here, we quantify the occurrence and distribution of MPs in surface water samples collected from Topçu Pond (Türkiye) for the first time. Water samples were collected at five stations and filtered (30 L for each station) through stacked stainless steel sieves (5 mm, 328 µm, and 61 µm mesh size) with a diameter of 30 cm. The abundance, size, color, shape, and type of collected debris samples were analyzed after the wet peroxide oxidation process. MP particles were observed in all samples at an average abundance of 2.4 MPs/L. The most abundant MP size class and type were 0-999 µm and fiber respectively. On the other hand, prevalent colors were black and colorless in general. According to the Raman analysis results, the identified MP derivatives were polypropylene (40%), polyamide (30%), ethylene acrylic acid (20%), and polyvinylchloride (10%). Moreover, the pollution load index (PLI) index was used to determine the pollution status. PLI values were determined as 1.91 at station S1, 1.73 at station S2, 1.31 at station S3, 1 at station S4 and 1.24 at station S5. The PLI value determined for the overall pond was 1.4. The results of this research show that MP pollution is present in Topçu Pond and contributes to the expanding literature on MP pollution in pond ecosystems.

Beyond surface: Unveiling ecological and economic ramifications of microplastic pollution in the oceans

Every year, the global production of plastic waste reaches a staggering 400 million metric tons (Mt), precipitating adverse consequences for the environment, food safety, and biodiversity as it degrades into microplastics (MPs). The multifaceted nature of MP pollution, coupled with its intricate physiological impacts, underscores the pressing need for comprehensive policies and legislative frameworks. Such measures, alongside advancements in technology, hold promise in averting ecological catastrophe in the oceans. Mandated legislation represents a pivotal step towards restoring oceanic health and securing the well-being of the planet. This work offers an overview of the policy hurdles, legislative initiatives, and prospective strategies for addressing global pollution due to MP. Additionally, this work explores innovative approaches that yield fresh insights into combating plastic pollution across various sectors. Emphasizing the importance of a global plastics treaty, the article underscores its potential to galvanize collaborative efforts in mitigating MP pollution's deleterious effects on marine ecosystems. Successful implementation of such a treaty could revolutionize the plastics economy, steering it towards a circular, less polluting model operating within planetary boundaries. Failure to act decisively risks exacerbating the scourge of MP pollution and its attendant repercussions on both humanity and the environment. Central to this endeavor are the formulation, content, and execution of the treaty itself, which demand careful consideration. While recognizing that a global plastics treaty is not a panacea, it serves as a mechanism for enhancing plastics governance and elevating global ambitions towards achieving zero plastic pollution by 2040. Adopting a life cycle approach to plastic management allows for a nuanced understanding of possible trade-offs between environmental impact and economic growth, guiding the selection of optimal solutions with socio-economic implications in mind. By embracing a comprehensive strategy that integrates legislative measures and technological innovations, we can substantially reduce the influx of marine plastic litter at its sources, safeguarding the oceans for future generations.

Comparative microplastic analysis in urban waters using μ-FTIR and Py-GC-MS: A case study in Amsterdam

The contamination of freshwater with microplastics (MPs) has been established globally. While the analysis of MPs has predominantly involved spectroscopic methods for revealing particle numbers, the potential of employing spectroscopy for mass estimation has been underutilized. Consequently, there is a need to enhance our understanding of the mass loads of MPs and ensure the complementarity and comparability of various techniques for accurate quantification. This study presents the first comparative results on urban water samples using micro Fourier-transform infrared (μ-FTIR) imaging and pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) to identify and quantify MPs in both particle numbers and mass concentration. Two sampling campaigns in summer and winter were conducted at 11 locations within the Amsterdam canal network. An advanced in-situ volume-reducing sampling pump was employed to collect MPs from the surface water within the size fraction of 10-300 μm. The analysis revealed MP concentrations within the range of 16-107 MP/m3, estimated to be 2.0-789 μg/m3 by μ-FTIR imaging and 8.5-754 μg/m3 by Py-GC-MS. The results of the two analysis techniques showed good comparability in terms of the general trends of MP abundances, with variations in polymer compositions due to the inherent inter-methodological differences. Elevated MP concentrations were observed in the city center compared to the suburban areas. In addition, seasonal differences in MP abundances were noted at the locations with high human activity.

Exposure to polystyrene microplastics and perfluorooctane sulfonate disrupt the homeostasis of intact planarians and the growth of regenerating planarians

Microplastics (MPs) and perfluorinated compounds (PFAS) are widespread in the global ecosystem. MPs have the ability to adsorb organic contaminants such as perfluorooctane sulfonate (PFOS), leading to combined effects. The current work aims to explore the individual and combined toxicological effects of polystyrene (PS) and PFOS on the growth and nerves of the freshwater planarian (Dugesia japonica). The results showed that PS particles could adsorb PFOS. PS and PFOS impeded the regeneration of decapitated planarians eyespots, whereas the combined treatment increased the locomotor speed of intact planarians. PS and PFOS caused significant DNA damage, while co-treatment with different PS concentrations aggravated and attenuated DNA damage, respectively. Further studies at the molecular level have shown that PS and PFOS affect the proliferation and differentiation of neoblasts in both intact and regenerating planarians, alter the expression levels of neuronal genes, and impede the development of the nervous system. PS and PFOS not only disrupted the homeostasis of intact planarians, but also inhibited the regeneration of decapitated planarians. This study is the first to assess the multiple toxicity of PS and PFOS to planarians after combined exposure. It provides a basis for the environmental and human health risks of MPs and PFAS.

Neurotoxicities induced by micro/nanoplastics: A review focusing on the risks of neurological diseases

Pollution of micro/nano-plastics (MPs/NPs) is ubiquitously prevalent in the environment, leading to an unavoidable exposure of the human body. Despite the protection of the blood-brain barrier, MPs/NPs can be transferred and accumulated in the brain, which subsequently exert negative effects on the brain. Nevertheless, the potential neurodevelopmental and/or neurodegenerative risks of MPs/NPs remain largely unexplored. In this review, we provide a systematic overview of recent studies related to the neurotoxicity of MPs/NPs. It covers the environmental hazards and human exposure pathways, translocation and distribution into the brain, the neurotoxic effects, and the possible mechanisms of environmental MPs/NPs. MPs/NPs are widely found in different environment matrices, including air, water, soil, and human food. Ambient MPs/NPs can enter the human body by ingestion, inhalation and dermal contact, then be transferred into the brain via the blood circulation and nerve pathways. When MPs/NPs are present in the brain, they can initiate a series of molecular or cellular reactions that may harm the blood-brain barrier, cause oxidative stress, trigger inflammatory responses, affect acetylcholinesterase activity, lead to mitochondrial dysfunction, and impair autophagy. This can result in abnormal protein folding, loss of neurons, disruptions in neurotransmitters, and unusual behaviours, ultimately contributing to the initiation and progression of neurodegenerative changes and neurodevelopmental abnormalities. Key challenges and further research directions are also proposed in this review as more studies are needed to focus on the potential neurotoxicity of MPs/NPs under realistic conditions.

Comparison of reproductive toxicity between pristine and aged polylactic acid microplastics in Caenorhabditis elegans

Caenorhabditis elegans was employed as model to compare reproductive toxicity between pristine and aged polylactic acid microplastics (PLA-MPs). Aged PLA-MPs induced by UV irradiation showed degradation reflected by decrease in size and alteration in morphological surface. Aged PLA-MPs also exhibited some certain changes of chemical properties compared to pristine PLA-MP. Compared with pristine PLA-MPs, more severe toxicity on reproductive capacity and gonad development was detected in 1-100 μg/L aged PLA-MPs. Meanwhile, aged PLA-MPs caused more severe enhancement in germline apoptosis and alterations in expressions of ced-9, ced-4, ced-3, and egl-1 governing cell apoptosis. In addition, aged PLA-MPs resulted in more severe increase in expression of DNA damage related genes (cep-1, mrt-2, hus-1, and clk-2) compared to pristine PLA-MPs, and the alterations in expression of ced-9, ced-4, ced-3, and egl-1 in pristine and aged PLA-MPs could be reversed by RNAi of cep-1, mrt-2, hus-1, and clk-2. Besides this, enhanced germline apoptosis in pristine and aged PLA-MPs exposed animals was also suppressed by RNAi of cep-1, mrt-2, hus-1, and clk-2. Therefore, our results suggested the more severe exposure risk of aged PLA-MPs than pristine PLA-MPs in causing reproductive toxicity, which was associated with the changed physicochemical properties and DNA damage induced germline apoptosis.

Fate, abundance and ecological risks of microcystins in aquatic environment: The implication of microplastics

Microcystins are highly toxic cyanotoxins and have been produced worldwide with the global expansion of harmful cyanobacterial blooms (HABs), posing serious threats to human health and ecosystem safety. Yet little knowledge is available on the underlying process occurring in the aquatic environment with microcystins. Microplastics as vectors for pollutants has received growing attention and are widely found co-existing with microcystins. On the one hand, microplastics could react with microcystins by adsorption, altering their environmental behavior and ecological risks. On the other hand, particular attention should be given to microplastics due to their implications on the outbreak of HABs and the generation and release of microcystins. However, limited reviews have been undertaken to link the co-existing microcystins and microplastics in natural water. This study aims to provide a comprehensive understanding on the environmental relevance of microcystins and microplastics and their potential interactions, with particular emphasis on the adsorption, transport, sources, ecotoxicity and environmental transformation of microcystins affected by microplastics. In addition, current knowledge gaps and future research directions on the microcystins and microplastics are presented. Overall, this review will provide novel insights into the ecological risk of microcystins associated with microplastics in real water environment and lay foundation for the effective management of HABs and microplastic pollution.

Leveraging food waste for electricity: A low-carbon approach in energy sector for mitigating climate change and achieving net zero emission in Hong Kong (China)

In recent years, food waste has been a global concern that contributes to climate change. To deal with the rising impacts of climate change, in Hong Kong, food waste is converted into electricity in the framework of low-carbon approach. This work provides an overview of the conversion of food waste into electricity to achieve carbon neutrality. The production of methane and electricity from waste-to-energy (WTE) conversion are determined. Potential income from its sale and environmental benefits are also assessed quantitatively and qualitatively. It was found that the electricity generation from the food waste could reach 4.33 × 109 kWh annually, avoiding equivalent electricity charge worth USD 3.46 × 109 annually (based on US' 8/kWh). An equivalent CO2 mitigation of 9.9 × 108 kg annually was attained. The revenue from its electricity sale in market was USD 1.44×109 in the 1st year and USD 4.24 ×109 in the 15th year, respectively, according to the projected CH4 and electricity generation. The modelling study indicated that the electricity production is 0.8 kWh/kg of landfilled waste. The food waste could produce electricity as low as US' 8 per kW ∙ h. In spite of its promising results, there are techno-economic bottlenecks in commercial scale production and its application at comparable costs to conventional fossil fuels. Issues such as high GHG emissions and high production costs have been determined to be resolved later. Overall, this work not only leads to GHG avoidance, but also diversifies energy supply in providing power for homes in the future.

Using Spirulina platensis as a natural biocoagulant for polystyrene removal from aqueous medium: performance, optimization, and modeling

Microplastics (MPs) are newly recognized contaminants that result from the breakdown of plastics released into aquatic environments. This study focuses on the elimination of polystyrene (PS) using S. platensis, a natural biocoagulant, from aqueous solutions. The research investigated several crucial variables, including the initial level of PS ranging from 100 to 900 mg L-1, pH levels from 4 to 10, the contact time of 20-40 min, and doses of S. platensis ranging from 50 to 250 mg L-1. The analysis of the data revealed that the quadratic model offered the best fit for the experimental results. In the present study, we utilized S. platensis as a novel natural biocoagulant to effectively eliminate PS from aqueous solutions. Process optimization was performed using a Box-Behnken design (BBD). The best-fitting model for the data was the quadratic model. The results displayed that the highest elimination of PS (81%) was occurred at a pH of 4, with a contact time of 30 min, a dose of S. platensis at 250 mg L-1, and a PS concentration of 500 mg L-1. These findings show that S. platensis has a significant effect on removing PS from the aquatic environment. Algae can serve as a convenient and eco-friendly method, replacing chemical coagulants, to effectively remove MPs from the aquatic environment.

Airborne microplastic/nanoplastic research: a comprehensive Web of Science (WoS) data-driven bibliometric analysis

This paper presents the landscape of research on airborne microplastics and nanoplastics (MPs/NPs) according to the bibliometric analysis of 147 documents issued between 2015 and 2021, extracted from the Web of Science database. The publications on airborne MPs/NPs have increased rapidly from 2015 onwards, which is largely due to the existence of funding support. Science of the Total Environment is one of the prominent journals in publishing related papers. China, England, the USA, and European Countries have produced a significant output of airborne MP/NP research works, which is associated with the availability of funding agencies regionally or nationally. The research hotspot on the topic ranges from the transport of airborne MPs/NPs to their deposition in the terrestrial or aquatic environments, along with the contamination of samples by indoor MPs/NPs. Most of the publications are either research or review papers related to MPs/NPs. It is crucial to share the understanding of global plastic pollution and its unfavorable effects on humankind by promoting awareness of the existence and impact of MPs/NPs. Funding agencies are vital in boosting the research development of airborne MPs/NPs. Some countries that are lacking funding support were able to publish research findings related to the field of interest, however, with lesser research output. Without sufficient fundings, some impactful publications may not be able to carry a substantial impact in sharing the findings and discoveries with the mass public.

Foodborne and airborne polyethersulfone nanoplastics respectively induce liver and lung injury in mice: Comparison with microplastics

Micro/nanoplastics (MNP) are ubiquitous in the environment and multiple living organisms. The toxicity of some common types of MNP, e.g., polyethersulfone (PES) MNP, remains poorly understood. Multi-omics approaches were used in this study to determine the effects of foodborne and airborne PES MNP on liver and lung, respectively. Foodborne MNP were capable of inducing gut microbial dysbiosis, gut and serum metabolic disruption, and liver transcriptomic dysregulation, and affecting serum antioxidant activity and liver function, resulting in liver injury. As for the airborne MNP, they were found to induce nasal and lung microbial dysbiosis, serum and lung metabolic disruption, and liver transcriptome disturbance, and cause disrupted serum antioxidant activity and lung injury. Foodborne and airborne PES NP were found to respectively induce greater liver and lung toxicity than MP, which could be associated with the differences between NP and MP exposures. The relevant results suggest that foodborne PES MNP could disrupt the "gut microbiota-gut-liver" axis and induce hepatic injury, while airborne PES MNP could affect the "airborne microbiota-lung" axis and cause lung injury. The findings could benefit the diagnoses of liver and lung injury respectively induced by foodborne and airborne PES MNP, as well as the proper use of PES in human living environment.

Microplastics as an emerging contaminant of concern to our environment: a brief overview of the sources and implications

Over the years, it has become evident that microplastics are one of the most important contaminants of concern requiring significant attention. The large abundance of microplastics that are currently in the environment poses potential toxicity risks to all organisms that are exposed to them. Microplastics have been found to affect the physiological and biological processes in marine and terrestrial organisms. As well as being a contaminant of concern in itself, microplastics also have the ability to act as vectors for other contaminants. The potential for microplastics to carry pollutants and transfer them to other organisms has been documented in the literature. Microplastics have also been linked to hosting antibiotic resistant bacteria and antibiotic resistance genes which poses a significant risk to the current health system. There has been a significant increase in research published surrounding the topic of microplastics over the last 5 years. As such, it is difficult to determine and find up to date and relevant information. This overview paper aims to provide a snapshot of the current and emerging sources of microplastics, how microplastics can act as a contaminant and have toxic effects on a range of organisms and also be a vector for a large variety of other contaminants of concern. The aim of this paper is to act as a tool for future research to reference relevant and recent literature in this field.

Fabrication, characterization, and application of light weight thermal insulation material from combined buffing dust and plaster of paris for construction industry

Buffing dust, generated from tannery industries, is a source of air pollution in Pakistan. Valorization of the waste into another useful material is important to deal with the environmental pollution, while reducing waste disposal costs in landfills. To demonstrate its technological strength, this work fabricates a thermal insulation material made of plaster of Paris and the buffing dust (from tanning waste) in the form of a composite with superior mechanical properties and low thermal conductivity. Buffing dust with concentrations ranging from 5 to 20% (w/w) were loaded in the composite. The samples synthesized were made slurry of plaster of Paris, buffing dust, and water at ambient temperature. The physico-mechanical properties of composite were analyzed. It was found that the composite had better thermal insulation properties than the panels of the plaster of Paris. Its thermal conductivity was reduced to 15% after adding buffing dust (20% w/w). All the materials had physico-chemical properties like tensile strength (0.02 MPa and 0.06 MPa), density (700-400 kg/m3), water absorption (5.2-8.6%) and thermal conductivity (0.17000-0.09218 W/m-K). Thermogravimetric analysis showed that the material was thermally stable at temperatures ranging from 145 to 177 °C, while FT-IR results revealed that the composite contained O-H, N-H, and CO functional groups. SEM analysis displayed that the composite's homogeneity was reduced with low voids due to buffing dust addition, while EDX analysis showed that the composite contained 23.62% of S, 26.76% of Ca, 49.2% of O and 0.42% of C. This implies that buffing dust could be recycled to manufacture heat insulation materials for construction sector to reduce air pollution, while minimizing energy consumption. By integrating the buffing dust from tanning waste and the plaster of Paris as a composite for construction sector, this work promotes the recycling of unused waste, while saving public funds. Instead of paying landfill fees and polluting soil, the waste may be recycled at lower cost, while reducing environmental damage.

Tackling microplastics pollution in global environment through integration of applied technology, policy instruments, and legislation

Microplastic pollution is a serious environmental problem that affects both aquatic and terrestrial ecosystems. Small particles with size of less than 5 mm, known as microplastics (MPs), persist in the environment and pose serious threats to various species from micro-organisms to humans. However, terrestrial environment has received less attention than the aquatic environment, despite being a major source of MPs that eventually reaches water body. To reflect its novelty, this work aims at providing a comprehensive overview of the current state of MPs pollution in the global environment and various solutions to address MP pollution by integrating applied technology, policy instruments, and legislation. This review critically evaluates and compares the existing technologies for MPs detection, removal, and degradation, and a variety of policy instruments and legislation that can support the prevention and management of MPs pollution scientifically. Furthermore, this review identifies the gaps and challenges in addressing the complex and diverse nature of MPs and calls for joint actions and collaboration from stakeholders to contain MPs. As water pollution by MPs is complex, managing it effectively requires their responses through the utilization of technology, policy instruments, and legislation. It is evident from a literature survey of 228 published articles (1961-2023) that existing water technologies are promising to remove MPs pollution. Membrane bioreactors and ultrafiltration achieved 90% of MPs removal, while magnetic separation was effective at extracting 88% of target MPs from wastewater. In biological process, one kg of wax worms could consume about 80 g of plastic/day. This means that 100 kg of wax worms can eat about 8 kg of plastic daily, or about 2.9 tons of plastic annually. Overall, the integration of technology, policy instrument, and legislation is crucial to deal with the MPs issues.

Analytical challenges in detecting microplastics and nanoplastics in soil-plant systems

Microplastics (MPx) and nanoplastics (NPx) are increasingly accumulating in terrestrial ecosystems, heightening concerns about their potential adverse effects on human health via the food chain. Techniques aimed at recovering the most challenging colloidal fractions of MPx and NPx, especially for analytical purposes, are limited. This systematic review emphasises the absence of a universal, efficient, and cost-effective analytical method as the primary hindrance to studying MPx and NPx in soil and plant samples. The study reveals that several methods, including density separation, organic matter removal, and filtration, are utilized to detect MPx or NPx in soil through vibrational spectroscopy and visual identification. Instruments such as Pyrolysis Gas Chromatography Mass Spectrometry (Py-GCMS), Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR) Spectroscopy, and fluorescence microscopy are employed to identify MPx and NPx in plant tissue. In extraction procedures, organic solvents and sonication are used to isolate NPx from plant tissues, while Pyrolysis GC-MS quantifies the plastics. SEM and TEM serve to observe and characterize NPx within plant tissues. Additionally, FTIR and fluorescence microscopy are utilized to identify polymers of MPx and NPx based on their spectral characteristics and fluorescence signals. The findings from this review clarify the identification and quantification methods for MPx and NPx in soil and plant systems and provide a comprehensive methodology for assessing MPx/NPx in the environment.

A critical review on nanoplastics and its future perspectives in the marine environment

Nanoplastics (plastic particles smaller than 1 μm) are the least-known type of marine litter. Nanoplastics (NPs) have attracted much interest in recent years because of their prevalence in the environment and the potential harm they can cause to living organisms. This article focuses on understanding NPs and their fate in the marine environment. Sources of NPs have been identified, including accidental release from products or through nano-fragmentation of larger plastic debris. As NPs have a high surface area, they may retain harmful compounds. The presence of harmful additives in NPs poses unique practical challenges for studies on their toxicity. In this review, several methods specifically adapted for the physical and chemical characterization of NPs have been discussed. Furthermore, the review provides an overview of the translocation and absorption of NPs into organisms, along with an evaluation of the release of potential toxins from NPs. Further, we have provided an overview about the existing methods suggested for the possible degradation of these NPs. We conclude that the hazards of NPs are plausible but unknown, necessitating a thorough examination of NPs' sources, fate, and effects to better mitigate and spread awareness about this emerging contaminant.

Decarbonization in waste recycling industry using digitalization to promote net-zero emissions and its implications on sustainability

Digitalization and sustainability have been considered as critical elements in tackling a growing problem of solid waste in the framework of circular economy (CE). Although digitalization can enhance time-efficiency and/or cost-efficiency, their end-results do not always lead to sustainability. So far, the literatures still lack of a holistic view in understanding the development trends and key roles of digitalization in waste recycling industry to benefit stakeholders and to protect the environment. To bridge this knowledge gap, this work systematically investigates how leveraging digitalization in waste recycling industry could address these research questions: (1) What are the key problems of solid waste recycling? (2) How the trends of digitalization in waste management could benefit a CE? (3) How digitalization could strengthen waste recycling industry in a post-pandemic era? While digitalization boosts material flows in a CE, it is evident that utilizing digital solutions to strengthen waste recycling business could reinforce a resource-efficient, low-carbon, and a CE. In the Industry 4.0 era, digitalization can add 15% (about USD 15.7 trillion) to global economy by 2030. As digitalization grows, making the waste sector shift to a CE could save between 30% and 35% of municipalities' waste management budget. With digitalization, a cost reduction of 3.6% and a revenue increase of 4.1% are projected annually. This would contribute to USD 493 billion in an increasing revenue yearly in the next decade. As digitalization enables tasks to be completed shortly with less manpower, this could save USD 421 billion annually for the next decade. With respect to environmental impacts, digitalization in the waste sector could reduce global CO₂ emissions by 15% by 2030 through technological solutions. Overall, this work suggests that digitalization in the waste sector contributes net-zero emission to a digital economy, while transitioning to a sustainable world as its social impacts.