One-pot synthesis of 2D Ag/BiOCl/Bi2O2CO3 S-scheme heterojunction with oxygen vacancy for photocatalytic disinfection of Fusarium graminearum in vitro and in vivo

Recent advances on photocatalytic degradation of phthalate ester plasticizers using nanomaterial photocatalysts

Phthalate esters (PAEs) are a class of organic ester compounds containing benzene rings, which have been widely applied as additives in various fields, especially as plasticizers in plastic product to improve the flexibility. Due to the non-covalent bonding, PAEs inevitably leach out from the plastic polymers into environments. PAEs are endocrine disruptors, which possess seriously hazards to organisms, such as reproductive and genetic abnormalities. Now, PAEs pollution has become a serious environmental problem. Moreover, due to its difficulty in natural degradation, it has become a widespread concern to eliminate PAEs pollution with energy-saving technology. Among various degradation technologies for organic pollutant removal, photocatalytic degradation has attracted more attentions due to the merits of low energy consumption, high removal efficiency, abundant photocatalyst and low secondary pollution. In this article, the photocatalytic degradation using nanomaterial photocatalysts towards four kinds of typical PAEs were reviewed, including di(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), dimethyl phthalate (DMP), and diethyl phthalate (DEP). To improve the photocatalytic degradation efficiency, various semiconductor photocatalysts have been developed, and the optical and electrochemical properties, and the degradation mechanism and pathway have been also discussed. Finally, the challenges and perspectives of photocatalytic technology on PAEs elimination were presented.

Construction of CdIn2S4/MXene-TiO2 Z-Scheme Heterojunction for High-Gain Organic Photoelectrochemical Transistor to Achieve Maximized Transconductance at Zero Bias

Interfacial charge-carrier complexation is a bottleneck problem governing the gating effect of organic photoelectrochemical transistor (OPECT) biosensors. Therefore, it has long been desired to enhance the OPECT gating effect and realize the maximum transconductance at zero bias. In this study, an in situ engineered heterojunction gating and nano-enzymatic catalytic integration of OPECT-colorimetric dual-mode sensing platform is developed for dibutyl phthalate detection. Specifically, highly efficient photoactive CdIn2S4/MXene-TiO2 Z-scheme heterojunction is constructed by two-step in situ engineering to promote effective separation of electron-hole pairs to achieve sensitive gating of poly(ethylene dioxythiophene):poly(styrene sulfonate)-based OPECT. Target-induced rolling circle amplification is used as the signal amplification unit, and Ag@Carbon Sphere (Ag─CS) is used as the signal conditioning element, which on the one hand causes shunting of photogenerated electrons, leading to energy transfer and reduced gating. At the same time, Ag─CS acts as a peroxidase-mimicking nanozyme to oxidize the TMB discoloration. Importantly, the prepared sensor exhibits good selectivity and high sensitivity for the detection of dibutyl phthalate with a detection limit of 0.08 fM and also shows superior detection ability in real water bodies. Therefore, the sensor provides an ideal choice for toxic molecule detection and has a promising application in environmental monitoring and food analysis.

Bi2O2CO3/Bi2O2+xS1-x S-scheme n-n heterojunction with boosted photocatalytic degradation for bisphenol A

Bisphenol A (BPA) is considered to be a typical endocrine-disrupting compounds (EDCs), and its widespread existence in nature is quite harmful to human and ecological environment. The S-scheme n-n heterojunction composite (Bi2O2CO3/Bi2O2+xS1-x) was constructed via a facile two-step chemical precipitation method for the removal of BPA in water environment. The optimal composite catalyst exhibited outstanding catalytic activity for BPA, obtaining approximately 0.00724 min-1 degradation rate constant which was 6.77 and 3.37 times that of the pristine BOC (Bi2O2CO3) and BOS (Bi2O2+xS1-x), respectively. UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS), valence band X-ray photoelectron spectroscopy (VB XPS), and Mott-Schottky (M-S) plots were used to analyze the band position of the catalysts, and it was found that the two semiconductors were n-type semiconductors and formed S-scheme heterojunction. Through radical trapping strategies and electron spin resonance (ESR) analysis, the results showed that the hole and superoxide radicals took a major part in the removal of BPA. According to the products detected through high performance liquid chromatography-mass spectrometer (HPLC-MS), two reaction pathways of BPA degradation were deduced.

A novel Ag/Bi/Bi2O2CO3 photocatalyst effectively removes antibiotic-resistant bacteria and tetracycline from water under visible light irradiation

Currently, achieving dual applications of Bi2O2CO3-based photocatalysts in photocatalytic degradation and sterilization under visible-light conditions is challenging. In this study, a novel Ag/Bi/Bi2O2CO3 visible-light photocatalyst with bimetallic doping and rich oxygen vacancies was successfully synthesized using a one-pot hydrothermal crystallization method. The existence of oxygen vacancies was verified by X-ray photoelectron spectroscopy (XPS) and Electron spin resonance (ESR) analysis. The experimental results showed that Ag/Bi/Bi2O2CO3 killed ∼100% (log 7) of antibiotic-resistant Escherichia coli (AR-E. coli) within 60 min and degraded 83.81% of tetracycline (TC) within 180 min under visible light irradiation. Moreover, Ag/Bi/Bi2O2CO3 can still remove 61.07% of TC in water after 5 cycles, showing excellent photocatalytic cycle stability and reusability. The possible degradation pathway of TC was determined by liquid chromatography-mass spectrometry. It was found that the main active substances in the photocatalytic disinfection of AR-E. coli were 1O2, h+, and ·OH, while 1O2 was the dominant active species in the photocatalytic degradation of TC. This study presents a promising Bi2O2CO3-based visible light photocatalyst for treating both antibiotics (TC) and antibiotic-resistant bacteria (AR-E. coli) in water.

Construction of a BiOCl/Bi2O2CO3 S-Scheme Heterojunction Photocatalyst via Sharing [Bi2O2]2+ Slabs with Enhanced Photocatalytic H2O2 Production Performance

The construction of a close contact interface is key to enhancing the photocatalytic activity in heterojunctions. In the work, the BiOCl/Bi2O2CO3 of sharing [Bi2O2]2+ slabs S-scheme heterojunction was prepared by a HCl in situ etching method. The optimal composite photocatalyst could accomplish sizable productivity of H2O2 to 2562.95 μmol g-1 h-1 under simulated solar irradiation, higher than that of primitive Bi2O2CO3 and BiOCl. Moreover, the synthesized catalysts showed good stability. The band structures of BiOCl and Bi2O2CO3 were determined, confirming the formation of BiOCl/Bi2O2CO3 S-scheme heterojunction The BiOCl/Bi2O2CO3, which obviously improved the separation efficiency of photoinduced carriers and effectively enhanced the redox ability of the photocatalyst. In addition, density functional theory (DFT) calculations were utilized to analyze the electron transfer properties and the constitution of the built-in electric field at the interface of BiOCl and Bi2O2CO3. The photocatalytic reaction process was further researched by electron paramagnetic resonance (EPR), indicating the active species in the photocatalytic production of hydrogen peroxide. Eventually, a feasible S-scheme electron transfer mechanism on the BiOCl/Bi2O2CO3 heterojunction during the photocatalytic H2O2 production process was proposed and discussed. This work provides a reliable strategy for the fine design of the S-scheme heterojunction.

Z-scheme heterojunction g-C3N4-TiO2 reinforced chitosan/poly(vinyl alcohol) film: Efficient and recyclable for fruit packaging

Nanoparticles-loaded bio-based polymers have emerged as a sustainable substitute to traditional oil-based packaging materials, addressing the challenges of limited recyclability and significant environmental impact. However, the functionality and efficiency of nanoparticles have a significant impact on the application of bio-based composite films. Herein, graphitic carbon nitride (g-C3N4) and titanium dioxide (TiO2) coupled photocatalyst (g-C3N4-TiO2) was prepared by one-step calcination and introduced into chitosan (CS) and polyvinyl alcohol (PVA) solution to fabricate g-C3N4-TiO2/CS/PVA green renewable composite film via solution casting method. The results demonstrated the successful preparation of a Z-scheme heterojunction g-C3N4-TiO2 with exceptional photocatalytic activity. Furthermore, the incorporation of heterojunction enhanced mechanical properties, water barrier, and ultraviolet (UV) resistance properties of the fresh-keeping film. The g-C3N4-TiO2/CS/PVA composite film exhibited superior photocatalytic antibacterial preservation efficacy on strawberries under LED light, with a prolonged preservation time of up to 120 h, when compared to other films such as polyethylene (PE), CS/PVA, g-C3N4/CS/PVA, and TiO2/CS/PVA. In addition, the composite film has good recyclability and renewability. This work is expected to have great potential for low-cost fruit preservation and sustainable packaging, which also contributes to environmental protection.

Identification and characterization of silver nanoparticles from Erythrina indica and its antioxidant and Uropathogenic antimicrobial properties

The plant Erythrina indica comes under Fabaceae family, mainly used for used in traditional medicine as nervine sedative, antiepileptic, antiasthmatic, collyrium in opthalmia, antiseptic. Current study focused synthesize of silver nanoparticles (AgNPs) by E. indica leaf ethanol extract. The green-synthesized AgNPs underwent characterization using multiple analytical techniques, including UV-visible, FTIR, DLS, SEM, TEM, XRD, and EDX, and estimation of their antioxidant activity and antimicrobial activity. Phytochemical analysis identified alkaloids, tannins, saponins, flavonoids, and phenols as secondary metabolites. The Total Phenol Content (TPC) was determined to be 237.35 ± 2.02 mg GAE-1, indicating a substantial presence of phenolic compounds. The presence of AgNPs was verified through UV-Visible analysis at 420 nm, and FT-IR revealed characteristic phenolic functional groups. DLS analysis indicated a narrow size distribution (polydispersity index - PDI: 3.47%), with SEM revealing spherical AgNPs of approximately 20 nm. TEM showed homogeneous, highly polycrystalline AgNPs with lattice spacing at 0.297. XRD analysis demonstrated crystallinity and purity, with distinct reflection peaks corresponding to miller indices of JCPDS card no. 01 087 1473. In vitro, AgNPs exhibited robust antioxidant activity like; DPPH, ABTS, and H2O2, surpassing E. indica-assisted synthesis. ABTS assay indicated higher antioxidant activity (81.94 ± 0.05%) for AgNPs at 734 nm, while E. indica extraction showed 39.67 ± 0.07%. At 532 nm, both E. indica extraction (57.71 ± 0.11%) and AgNPs (37.41 ± 0.17%) exhibited H2O2 scavenging. Furthermore, AgNPs displayed significant antimicrobial properties, inhibiting Staphylococcus aureus (15.7 ± 0.12 mm) and Candida albicans (10.7 ± 0.17 mm) byfor the concentration of 80 μg/mL. Through the characterizations underscore of the potential of Erythrina indica-synthesized AgNPs, rich in polyphenolic compounds, for pharmacological, medical, biological applications and antipyretic properties.

Activation of peroxydisulfate via BiCoFe-layered double hydroxide for effective degradation of aniline

The sulfate radical-based advanced oxidation processes (SR-AOPs) is a promising method for the degradation of pollutants, with the development of highly efficient catalysts for persulfate activation has been widely concerned. The novel BiCoFe-LDH (BCF-x) was synthesized successfully by coprecipitation method, which can activate peroxydisulfate (PDS) efficiently to degrade aniline. Comparative analysis with pure CoFe-LDH revealed a remarkable increase in reaction rate constant by approximately 14.66 times; the degradation rate of aniline (10 mg/L) was 100% in 60 min with the condition of 0.5 g/L BCF-1.5 and 0.5 g/L PDS, due to BCF-1.5 which was characterized as a complex of CoFe-LDH and Bi2O2CO3, promoting electron transport to improve the efficiency of activated PDS. In the reaction system, SO4•-, ·OH, and 1O2 were responsible for the aniline degradation and ·OH was the primary one. Furthermore, this work proposes a reaction electron transfer catalytic mechanism, which provided a new insight and good application prospect for efficient activation of PDS for pollutant degradation.

Construction of Bi/BiOI/BiOCl Z-scheme photocatalyst with enhanced tetracycline removal under visible light

Bi/BiOI/BiOCl composite photocatalyst was constructed by one-step stirring approach at ambient environment to remove of tetracycline (TC) antibiotics via photodegradation in aqueous medium. A systematic discussion of the architecture, composition, formation, photochemical performance and photocatalytic activity of Bi/BiOI/BiOCl was carried out. By adjusting the experimental conditions, it was found that the Bi/BiOI/BiOCl photocatalyst obtained by using 0.7 mmol NaBH4, I/Cl = 5% and reacting for 6 h had the greatest removal performance. Under visible light irradiation, the photocatalytic degradation efficiency of TC reached 90.3% within 60 min, surpassing that of single BiOCl and BiOI. Through the active species removal experiment, it was determined that •O2- made a primary contribution to the photocatalytic degradation process. Moreover, the formation of Z-scheme heterojunction in Bi/BiOI/BiOCl was discussed, analyzing the photocatalytic mechanism and TC degradation pathway. The ecological toxicity of TC solution before and after degradation to rice seedlings was preliminarily tested. This study provides an idea for one-step synthesis of bismuth-based composite photocatalysts, with potential applications in the photocatalytic degradation of antibiotics.

Porphyrin-based covalent organic polymers with customizable photoresponses for photodynamic inactivation of bacteria

Porphyrin-linked covalent organic polymers (COPs) provide a reliable photocatalytic platform, while photodynamic inactivation (PDI) induced by reliable porphyrin-based COPs is considered to be an effective method to resist microbial contamination. Herein, three tunable porphyrin-based covalent organic polymers (H2-Por-COPs, OH-Por-COPs, and Zn-Por-COPs) are designed and employed for the PDI of Staphylococcus aureus and Escherichia coli under visible light illumination. Interestingly, singlet oxygen (1O2) generation by the Por-COPs can be manipulated via intramolecular regulation with the order Zn-Por-COP > OH-Por-COP > H2-Por-COP. With rationally tune, the Zn-Por-COP demonstrated remarkable antibacterial activity against Staphylococcus aureus (kill percentage 99.65 % ± 0.24 %) and Escherichia coli (kill percentage 97.25 % ± 1.78 %) in only 15 min under visible-light irradiation. Density functional theory (DFT) calculations and photophysical tests showed that the presence of electron-donating -OH groups on the aromatic linkers and Zn2+ ions in porphyrin units narrowed the HOMO-LUMO gap, enhancing both light absorption, intersystem crossing (ISC) and 1O2 generation for more efficient bacteria inactivation. This work can be applied to efficiently screen suitable photosensitizers and provides a rational regulatory strategy for PDI of pathogenic bacteria.

C, F co-doping Ag/TiO2 with visible light photocatalytic performance toward degrading Rhodamine B

The organic pollutants in industrial wastewater continuously endanger human health. Therefore, effective treatment of organic pollutants is very urgent. Photocatalytic degradation technology is an excellent solution to remove it. TiO₂ photocatalysts are easy to prepare and have high catalytic activity, unfortunately, TiO₂ only absorbs ultraviolet light limiting its utilization of visible light. In this study, a facile environmentally friendly synthesis of Ag-coated on micro-wrinkled TiO₂-based catalysts in order to extend the absorption of Visible light. Firstly, a fluorinated titanium dioxide precursor was prepared by a one-step solvothermal method, and the precursor was calcined at high temperature in a nitrogen atmosphere to form a carbon dopant, and then a surface silver-deposited carbon/fluorine co-doped TiO₂ photocatalyst C/F-Ag-TiO₂ was prepared by a hydrothermal method The results showed that the Ag was coated on the wrinkled TiO₂ layer and C/F-Ag-TiO₂ photocatalyst was synthetized successfully. Benefit from the synergistic effect of doped carbon and fluorine atoms in combination with the quantum size effect of the surface silver nanoparticles, the band gap energy of C/F-Ag-TiO₂ (2.56 eV) is obviously lower than anatase (3.2eV). The photocatalyst achieved an impressive degradation rate of 84.2% for Rhodamine B in 4 h, with a degradation rate constant of 0.367 h^-1, which was 17 times higher than that of P25 under visible light. Therefore, the C/F-Ag-TiO₂ composite is a promising candidate as a highly efficient photocatalyst for environmental remediation.