Precise recognition of palladium through interlaminar chelation in a covalent organic framework

Selective Gold Recycling from Electronic Waste Using a Highly Stable Porous Aromatic Framework/Polymer and Its Application for CO2 Electroreduction

Recycling gold from electronic waste represents a sustainable and environmentally friendly strategy for both resource recovery and waste reduction. In this study, we designed an innovative and highly stable porous aromatic framework (PAF)/polymer composite, PAF-147/polydopamine (PDA), as an efficient adsorbent for selective gold recovery for the first time. The maximum gold adsorption capacity of PAF-147/PDA reached 1700 mg g-1. Furthermore, it could rapidly extract over 95 % of gold from solutions in a pH range of 0-10 within just 2 minutes. Importantly, as a real application demonstration, the PAF-147/PDA composite selectively recovered 99 % of gold from the leachate of discarded central processing units. When the recovered Au-containing composite was applied to electrocatalytic CO2 reduction, the Faradaic efficiency for CO production exceeded 95 % across acidic, neutral, and alkaline electrolytes, outperforming most reported gold-based catalysts due to the cooperation effect of the composite and Au. This work opens a new way for the combination of selective gold recovery from electronic waste with highly efficient CO2 conversion.

Engineered covalent organic frameworks (COFs) for adsorption-based metal separation technologies: A critical review

Porous covalent organic frameworks (COFs) are promising materials used for separation and purification during environmental remediation. This critical review focuses on two key aspects. First, it critically examines strategies to improve COF design and structure and evaluates their impact on separation performance. Second, engineering approaches for enhancing the interactions between COF-based adsorbents and metals for enhanced separation and capture are elucidated. The latest body of research on separating metals (e.g., Li, K, Sr, Hg, Cd, Pb, Cr, Au, Ag, Pd, and U) using COF-based adsorbents is discussed to understand the factors that influence their performance. However, it is to be noted that COF-based adsorbents are still in their infancy and remain largley unexplored, mainly hindered by synthetic complexities and suboptimal crystalline structures. This highlights the need for further research and development to fully unlock the excellent potential of COFs for metal separation applications, particularly in environmental and energy applications.

Manipulating Electronic Effect of Nitrogen Donor-Based Ligands for Efficient Complexation and Separation of Palladium from Highly Acidic Solution

Nitrogen donor-based ligands are highly promising extractants for palladium separation from high-level liquid waste (HLLW). However, the electronic effect of these ligands, a critical factor influencing their complexation ability with Pd(II), remains largely unexplored. Herein, three picolinamide-based ligands were designed and synthesized, each featuring substituents with distinct electronic effects at the para-position of the pyridine (electro-donating methoxyl group for L-I, hydrogen for L-II, and electro-withdrawing ester group for L-III). The concurrent processes of Pd(II) coordination and ligand protonation enable the manipulation of pyridine nitrogen electronegativity, resulting in a tunable Pd(II) extraction performance. Notably, L-I exhibits the highest extraction efficiency at low acidities (≤1 M HNO3) but the lowest extraction at high acidities (≥3 M HNO3), whereas L-III shows the poorest efficiency at low acidities but the best performance at high acidities. The Job plot analysis and ESI-HRMS results reveal a 1:1 and 2:1 (L/Pd) stoichiometry in the Pd(II) complexation process. The single crystal X-ray analysis of Pd(NO3)2(L-II)2 complex confirms a four-coordinated Pd(II) center, with two pyridine nitrogen atoms and two monodentate nitrate oxygens forming a quadrangular geometry. Density functional theory (DFT) calculations further indicate that the formation of 2:1 (L/Pd) complexes is energetically favored, and the stronger basicity of the nitrogen atoms correlates with a higher Pd(II) binding affinity and increased susceptibility to protonation.

Native corncob-derived biosorbent with grafted 1,3,4-thiadiazole for enhanced adsorption of palladium in metallurgical wastewater

The reuse of agricultural waste brings significant benefits but still faces a multitude of challenges. In this work, novel precious metal sorbents were constructed by grafting 1,3,4-thiadiazole-2-thiol (MTD) and 2,5-dithiadiazole-1,3,4-thiadiazole (DMTD) onto native corncob, which could rapidly and selectively recover palladium (Pd) from metallurgical wastewater. The characterization of the sorbents by powder X-ray diffraction indicated that introducing MTD or DMTD on native corncob did not alter the crystallinity and inherent structural framework. Corn-2 (grafted with DMTD) exhibited good resistance to various coexisting ions and rapidly extracted Pd from metallurgical wastewater over a minimum of ten cycles. Both Langmuir models and pseudo-second-order kinetic models describe the adsorption process. Rapid and continuous extraction of Pd from metallurgical wastewater was achieved by fixed-bed adsorption on Corn-2 over at least three adsorption-desorption cycles. A fixed-bed column containing 1.0 g of this biosorbent recovered Pd from 3.5 L metallurgical wastewater with a Pd concentration of 8.1 mg/L before exhaustion and achieved a Pd concentration of 1986 mg/L in the eluate. Theoretical calculations and spectroscopic analysis showed that sulfur and nitrogen atoms significantly contribute to the recovery process, and coordination is the primary mechanism for Pd(II) recovery. This study highlights the suitability of cellulose-based adsorbents for the efficient extraction of Pd from metallurgical wastewater and provides valuable insights into resource utilization opportunities for agricultural waste.

Spatially Confined Construction of Ultrasmall Pd Clusters Within Nitro-Bonded Covalent Organic Frameworks for Efficient Alkyne Semihydrogenation

Confinement of metal species in porous supports is an effective strategy to optimize hydrogenation performance ascribing to tunable nanopore environments. However, only focusing on the electronic structure modulation for metal species has limited the design of improved catalysts. Herein, spatial confinement strategy is reported for constructing ultrasmall metal clusters in nitro-bonded COF (M@TpPa-NO2, M = Pd, Pt, Ru, Rh, Ir). Thereinto, Pd@TpPa-NO2 can achieve efficient co-catalytic alkyne semi-hydrogenation by the organic nitro units and the Pd clusters, with an outstanding phenylacetylene hydrogenation activity of TOF = 13756 h-1 and a high 94% styrene selectivity under 25 °C and 1 bar H2. In situ diffuse reflectance infrared Fourier transform spectroscopy and density functional theory calculations confirm that the H2 dissociation occurs at Pd clusters and the nitro groups accept spilled H atoms for subsequent semi-hydrogenation. The facile styrene desorption from TpPa-NO2 support contributes to a high semi-hydrogenation selectivity. This work provides new perspectives for designing efficient catalysts with overcoming the activity-selectivity trade-off in selective hydrogenation reactions.

Defect-Engineered MOF-801/Sodium Alginate Aerogel Beads for Boosting Adsorption of Pb(II)

Metal-organic frameworks (MOFs) are attractive adsorbents for heavy metal capture due to their superior stability, easy modification, and adjustable pore size. However, their inherent microporous structure poses challenges in achieving a higher adsorption capacity. Defect engineering is considered a simple method to create hierarchical MOFs with larger pores. Here, we employed l-aspartic acid as a mixed linker to bind Zr4+ clusters in competition with fumaric acid of MOF-801 to create defects, and the pore size was increased from 4.66 to 15.65 nm. Mercaptosuccinic acid was subsequently used as a postexchange ligand to graft the resultant MOF-801 by acid-ammonia condensation to further expand the pore size to 22.73 nm. Notably, the -NH2, -COOH, and -SH groups contributed by these two ligands increased the adsorption sites for Pb(II). The obtained defective MOF-801 with larger pores was thereafter loaded onto sodium alginate to form aerogel beads as adsorbents, and an adsorption capacity of 375.48 mg/g for Pb(II) was achieved, which is ∼51 times that of pristine MOF-801. The aerogel beads also exhibited outstanding reusability with a removal efficiency of ∼90.23% after 5 cycles of use. The adsorption mechanism of Pb(II) included ion-exchange interaction, as well as chelation interactions of Pb-O, Pb-NH2, and Pb-S. The versatile combination of defect engineering and composite beads provides novel inspirations for MOF modification for boosting heavy metal adsorption.

Conjugated Porous Organic Polymers Featuring Both Soft-Hard Combined Coordination Sites and Photoelectrochemical Properties for Palladium Capture and Subsequent Photocatalysis

Palladium (Pd) capture from high-level liquid waste for subsequent photocatalytic applications is desirable for the development of nuclear energy and the reutilization of valuable resources. Herein, we approach our design with a unique porous organic polymer containing thiazolo[5,4-d]thiazole units (denoted as TzPOP-OH). It possesses two potential soft-hard (N-O and S-O) combined coordination sites for Pd(II) coordination and features strong donor-acceptor repeating units and high planarity of linkage enforced by hydrogen bonds for subsequent photocatalysis. Accordingly, TzPOP-OH with three hydroxyl groups on the linkage exhibits a high Pd(II) capacity of 369 mg g-1 at 3 M HNO3, considerably surpassing those of the controlled polymer TzPOP without hydroxyl groups and most other reported materials. Additionally, TzPOP-OH boasts other merits, including outstanding acid tolerance, extraordinary radiation stability, good reusability, and remarkable selectivity. After palladium adsorption, Pd@TzPOP-OH demonstrates impressive photodegradation efficiency to reduce the concentration of rhodamine B in contaminated urban water from 10 to less than 0.1 ppm. This work provides a feasible approach to designing materials with both suitable coordination microenvironments and semiconductor properties for metal separation and photocatalysis.

Covalent Organic Framework Nanoarchitectonics: Recent Advances for Precious Metal Recovery

The recovery of precious metals (PMs) from secondary resources has garnered significant attention due to environmental and economic considerations. Covalent organic frameworks (COFs) have emerged as promising adsorbents for this purpose, owing to their tunable pore size, facile functionalization, exceptional chemical stability, and large specific surface area. This review provides an overview of the latest research progress in utilizing COFs to recover PMs. Firstly, the design and synthesis strategies of chemically stable COF-based materials, including pristine COFs, functionalized COFs, and COF-based composites, are delineated. Furthermore, the application of COFs in the recovery of gold, silver, and platinum group elements is delved into, emphasizing their high adsorption capacity and selectivity as well as recycling ability. Additionally, various interaction mechanisms between COFs and PM ions are analyzed. Finally, the current challenges faced by COFs in the field of PM recovery are discussed, and potential directions for future development are proposed, including enhancing the recyclability and reusability of COF materials and realizing the high recovery of PMs from actual acidic wastewater. With the targeted development of COF-based materials, the recovery of PMs can be realized more economically and efficiently in the future.

Emerging trends in the development and applications of triazine-based covalent organic polymers: a comprehensive review

Owing to unique structural features, triazine-based covalent organic polymers (COPs) have attracted significant attention and emerged as novel catalysts or support materials for an array of applications. Typically formed by reacting triazine-based monomers or the in situ creation of triazine rings from nitrile monomers, these COPs possess 2D/3D meso/microporous structures held together via strong covalent linkages. The quest for efficient, stable and recyclable catalytic systems globally necessitates the need for a well-structured and comprehensive review summarizing the synthetic methodologies and applications of triazine-based COPs. This review explores the various synthetic routes and applications of these COPs in photocatalysis, heterogeneous catalysis, electrocatalysis, adsorption and sensing. By exploring the latest advancements and future directions, this review offers valuable insights into the synthesis and applications of triazine-based COPs.

Analysis of COF-300 synthesis: probing degradation processes and 3D electron diffraction structure

Although COF-300 is often used as an example to study the synthesis and structure of (3D) covalent organic frameworks (COFs), knowledge of the underlying synthetic processes is still fragmented. Here, an optimized synthetic procedure based on a combination of linker protection and modulation was applied. Using this approach, the influence of time and temperature on the synthesis of COF-300 was studied. Synthesis times that were too short produced materials with limited crystallinity and porosity, lacking the typical pore flexibility associated with COF-300. On the other hand, synthesis times that were too long could be characterized by loss of crystallinity and pore order by degradation of the tetrakis(4-aminophenyl)methane (TAM) linker used. The presence of the degradation product was confirmed by visual inspection, Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). As TAM is by far the most popular linker for the synthesis of 3D COFs, this degradation process might be one of the reasons why the development of 3D COFs is still lagging compared with 2D COFs. However, COF crystals obtained via an optimized procedure could be structurally probed using 3D electron diffraction (3DED). The 3DED analysis resulted in a full structure determination of COF-300 at atomic resolution with satisfying data parameters. Comparison of our 3DED-derived structural model with previously reported single-crystal X-ray diffraction data for this material, as well as parameters derived from the Cambridge Structural Database, demonstrates the high accuracy of the 3DED method for structure determination. This validation might accelerate the exploitation of 3DED as a structure determination technique for COFs and other porous materials.

Separation of Palladium by an Imine-Linked Cu(I)-Organic Framework

Selective capture of palladium (Pd) is one of the important works in science due to its high application and low content in the Earth's crust. To this end, we present herein a new Cu(I)-organic framework (ECUT-MOF-1) by introducing pyridine N active sites to chelate Pd(II). ECUT-MOF-1 demonstrated that the maximal adsorption capacity of Pd(II) was 350 mg/g in pH = 3 solution. In addition, kinetic analysis, cycle performance, selectivity, and adsorption mechanisms were also investigated. All of the results suggested its superior application in the recovery of Pd(II).

Tailoring the Coordination Micro-Environment in Nanotraps for Efficient Platinum/Palladium Separation

Recovering platinum group metals from secondary resources is crucial to meet the growing demand for high-tech applications. Various techniques are explored, and adsorption using porous materials has emerged as a promising technology due to its efficient performance and environmental beingness. However, the challenge lies in effectively recovering and separating individual platinum group metals (PGMs) given their similar chemical properties. Herein, a breakthrough approach is presented by sophisticatedly tailoring the coordination micro-environment in a series of aminopyridine-based porous organic polymers, which enables the creation of platinum-specific nanotraps for efficient separation of binary PGMs (platinum/palladium). The newly synthesized POP-o2NH2-Py demonstrates record uptakes and selectivity toward platinum over palladium, with the amino groups adjacent to the pyridine moieties being vital in improving platinum binding performance. Further breakthrough experiments underline its remarkable ability to separate platinum and palladium. Spectroscopic analysis reveals that POP-o2NH2-Py offers a more favorable coordination fashion to platinum ions compared to palladium ions owing to the greater interaction between N and Pt4+ and stronger intramolecular hydrogen bonding between the amino groups and four coordinating chlorines at platinum. These findings underscore the importance of fine-tuning the coordination micro-environment of nanotraps through subtle modifications that can greatly enhance the selectivity toward the desired metal ions.

Molecular Engineering and Morphology Control of Covalent Organic Frameworks for Enhancing Activity of Metal-Enzyme Cascade Catalysis

Metal-enzyme integrated catalysts (MEICs) that combine metal and enzyme offer great potential for sustainable chemoenzymatic cascade catalysis. However, rational design and construction of optimal microenvironments and accessible active sites for metal and enzyme in individual nanostructures are necessary but still challenging. Herein, Pd nanoparticles (NPs) and Candida antarctica lipase B (CALB) are co-immobilized into the pores and surfaces of covalent organic frameworks (COFs) with tunable functional groups, affording Pd/COF-X/CALB (X = ONa, OH, OMe) MEICs. This strategy can regulate the microenvironment around Pd NPs and CALB, and their interactions with substrates. As a result, the activity of the COF-based MEICs in catalyzing dynamic kinetic resolution of primary amines is enhanced and followed COF-OMe > COF-OH > COF-ONa. The experimental and simulation results demonstrated that functional groups of COFs modulated the conformation of CALB, the electronic states of Pd NPs, and the affinity of the integrated catalysts to the substrate, which contributed to the improvement of the catalytic activity of MEICs. Further, the MEICs are prepared using COF with hollow structure as support material, which increased accessible active sites and mass transfer efficiency, thus improving catalytic performance. This work provides a blueprint for rational design and preparation of highly active MEICs.

Branched-Chain-Induced Host-Guest Assembly in Covalent-Organic Frameworks for Efficient Separation of No-Carrier-Added 177Lu

No-carrier-added (NCA) 177Lu is one of the most interesting nuclides for endoradiotherapy. With the dramatically rapid development of radiopharmaceutical and nuclear medicine, there is a sharp increase in the radionuclide supply of NCA 177Lu, which has formed a great challenge to current radiochemical separation constituted on classical materials. Hence, it is of vital importance to design and prepare new functional materials able of recovering 177Lu from an irradiated target with excellent efficacy. In this work, we proposed to apply noncovalent interactions to regulate the porous properties of covalent organic frameworks (COFs) by tuning the branched chain, rendering related covalent hosts different encapsulation abilities toward a flexible guest, 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (P507). More interestingly, we found that the noncovalent interaction has a great effect on the host-guest complexes, which can achieve efficient NCA 177Lu separation with high recovery (95.97%). A systematic mechanism combined with experimental and theoretical investigations has confirmed that the noncovalent interactions between COFs and P507 play a preeminent role in adjusting the macroscopic properties of the host-guest complexes. This work not only uncovers that noncovalent interactions can affect the basic properties of covalent organic bonded materials but also provides a strategy for the design and preparation of other new moieties with specific functionalities.

Enhanced protonation ability of covalent organic frameworks via N,O-bidentate chelation for photocatalytic H2 evolution

Inspired by the bidentate coordination chemistry of metal ions, we incorporated hydroxyl (OH) and methoxy (OMe) groups into the skeleton of imine-linked COFs to improve their protonation ability via intramolecular hydrogen bonds (O-H⋯NC). In comparison with the pristine COFs possessing monodentate nitrogen coordination sites, OH and OMe functionalized COFs with (N,O)-bidentate chelating sites exhibited up to 13.8 times faster photocatalytic hydrogen evolution rates (HERs).

Precise recognition and efficient recovery of Pd(II) from high-level liquid waste by a novel aminothiazole-functionalized silica-based adsorbent

Efficient recognition, separation and recovery of palladium from high-level liquid waste (HLLW) not only helps the safe, green and environmentally friendly disposal of nuclear waste, but also is an essential important supplement to overcome the growing shortage of natural palladium resources. Herein, a novel silica-based functional adsorbent named 2AT-SiAaC was prepared by a two-step method, i.e., grafting of 2-aminothiazole (2AT) via the amidated reaction after in-situ polymerization of acrylic monomers on porous silica. SEM, EDS, TG-DSC, BET and PXRD all proved the successful preparation of 2AT-SiAaC, and it exhibited ultrahigh adsorption selectivity for Pd(II) (Kd (distribution coefficient) ≥ 10,344.2 mL/g, SFPd/M (separation factor) ≥ 613.7), fast adsorption kinetics with short equilibrium time (t ≤ 1 h) and good adsorption capacity (Q ≥ 62.1 mg Pd/g). The dynamic column experiments shows that 2AT-SiAaC achieved efficiently separation of Pd(II) from simulated HLLW, and the enrichment coefficients (C/C0) of Pd(II) was as high as about 14 with the recovery rate nearly 99.9% and basically kept the same performance in three adsorption-desorption column cycle experiments. The adsorption mechanism was analyzed by FT-IR, XPS and DFT calculations, and the ultrahigh selectivity of 2AT-SiAaC was attributed to the preferred affinity of the soft N-donor atoms in 2AT for Pd(II). NO3- ions participated in the adsorption reaction to keep charge balance, and the frontier orbital electron density distribution diagram shows the charge transfer in the process of material preparation and adsorption. To sum up, 2AT-SiAaC adsorbent provided a new insight for precise recognition and efficient separation of Pd(II) from HLLW.

Precise stepwise recovery of platinum group metals from high-level liquid wastes based on SDB polymer-modified SiO2

Accurate separation and efficient recovery of platinum group metals (PGMs, mainly Ru, Rh and Pd) from high level liquid waste (HLLW) is a good choice for clean production and sustainable development of nuclear energy. Herein a novel SDB polymer modified silica-based amine-functionalized composite (dNbpy/SiO2-P) was synthesized for the separation and recovery of PGMs. Laser particle size analysis and BET results clarified the regular spherical and highly interconnected mesoporous structure of dNbpy/SiO2-P which is critical for the separation of PGMs. The removal percent of PGMs were over 99% on the optimized conditions. In addition, dNbpy/SiO2-P showed excellent selectivity (SFPd/M > 3805, SFRu/M > 1705, SFRh/M > 336) and repeatability (≥5). Interestingly, based on the different adsorption and desorption kinetics of PGMs, a double-column strategy is designed to solve the challenge of separating and recovering PGMs from HLLW. The enrichment factors of Pd(II), Ru(III) and Rh(III) reached 36.7, 8.2, and 1.2. The adsorption of PGMs was coordination mechanism and required the involvement of NO3- to maintain charge balance. The specific distribution of elements within the adsorbents and the changes in valence state were analyzed using depth-profiling XPS. Both depth-profiling XPS results and slope analysis revealed that the complex of dNbpy and PGMs is a 1 : 1 coordination structure. Overall, this work fills the gap that PGMs cannot be effectively separated and enriched from HLLW.

An Aryl-ether-linked Covalent Organic Framework Modified with Thioamide Groups for Selective Extraction of Palladium from Strong Acid Solutions

Efficient adsorption of palladium ions from acid nuclear waste solution is crucial for ensuring the safety of vitrification process for radioactive waste. However, the limited stability and selectivity of most current adsorbents hinder their practical applications under strong acid and intense radiation conditions. Herein, to address these limitations, we designed and synthesized an aryl-ether-linked covalent organic framework (COF-316-DM) grafted dimethylthiocarbamoyl groups on the pore walls. This unique structure endows COF-316-DM with high stability and exceptional palladium capture capacity. The robust polyarylether linkage enables COF-316-DM to withstand irradiation doses of 200 or 400 kGy of β/γ ray. Furthermore, COF-316-DM demonstrates fast adsorption kinetics, high adsorption capacity (147 mg g-1 ), and excellent reusability in 4 M nitric acid. Moreover, COF-316-DM exhibits remarkable selectivity for palladium ions in the presence of 17 interference ions, simulating high level liquid waste scenario. The superior adsorption performance can be attributed to the strong binding affinity between the thioamide groups and Pd2+ ions, as confirmed by the comprehensive analysis of FT-IR and XPS spectra. Our findings highlight the potential of COFs with robust linkers and tailored functional groups for efficient and selective capture of metal ions, even in harsh environmental conditions.

Rapid, Selective Extraction of Silver from Complex Water Matrices with a Metal-Organic Framework/Oligomer Composite Constructed via Supercritical CO2

Every year vast quantities of silver are lost in various waste streams; this, combined with its limited, diminishing supply and rising demand, makes silver recovery of increasing importance. Thus, herein, we report a controllable, green process to produce a host of highly porous metal-organic framework (MOF)/oligomer composites using supercritical carbon dioxide (ScCO2 ) as a medium. One resulting composite, referred to as MIL-127/Poly-o-phenylenediamine (PoPD), has an excellent Ag+ adsorption capacity, removal efficiency (>99 %) and provides rapid Ag+ extraction in as little as 5 min from complex liquid matrices. Notably, the composite can also reduce sliver concentrations below the levels (<0.1 ppm) established by the United States Environmental Protection Agency. Using theoretical simulations, we find that there are spatially ordered polymeric units inside the MOF that promote the complexation of Ag+ over other common competing ions. Moreover, the oligomer is able to reduce silver to its metallic state, also providing antibacterial properties.

Recovery of platinum group metal resources from high-level radioactive liquid wastes by non-contact photoreduction

Recovery of platinum group metals (PGMs) including palladium (Pd), rhodium (Rh), and ruthenium (Ru) from high-level radioactive liquid waste (HLLW) possesses enormous environmental and economic benefits. A non-contact photoreduction method was herein developed to selectively recover each PGM from HLLW. Soluble Pd(II), Rh(III), and Ru(III) ions were reduced to insoluble zero-valent metals and separated from simulated HLLW containing neodymium (Nd) as a representative for lanthanides, another main component in HLLW. Detailed investigation on the photoreduction of different PGMs revealed that Pd(II) could be reduced under 254- or 300-nm UV exposure using either ethanol or isopropanol as reductants. Only 300-nm UV light enabled the reduction of Rh(III) in the presence of ethanol or isopropanol. Ru(III) was the most difficult to reduce, which was only realized by 300-nm UV illumination in isopropanol solution. The effects of pH was also studied, suggesting that lower pH favored the separation of Rh(III) but hindered the reduction of Pd(II) and Ru(III). A delicate three-step process was accordingly designed to achieve the selective recovery of each PGM from simulated HLLW. Pd(II) was reduced by 254-nm UV light with the help of ethanol in the first step. Then Rh(III) was reduced by 300-UV light in the second step after the pH was adjusted to 0.5 to suppress the Ru(III) reduction. In the third step, Ru(III) was reduced by 300-nm UV light after isopropanol was added and the pH was adjusted to 3.2. The separation ratios of Pd, Rh, and Ru exceeded 99.8%, 99.9%, and 90.0%, respectively. Meanwhile, all Nd(III) still remained in the simulated HLLW. The separation coefficients between Pd/Rh and Rh/Ru exceeded 56,000 and 75,000, respectively. This work may provide an alternative method to recover PGMs from HLLW, which minimize the secondary radioactive wastes compared with other approaches.

Fluorination of Covalent Organic Framework Reinforcing the Confinement of Pd Nanoclusters Enhances Hydrogen Peroxide Photosynthesis

Metal-isolated clusters (MICs) physically confined on photoactive materials are of great interest in the field of photosynthesis of hydrogen peroxide (H2O2). Despite recent important endeavors, weak confinement of MICs in the reported photocatalytic systems leads to their low catalytic activity and stability. Herein, we report a new strategy of fluorinated covalent organic frameworks (COFs) to strongly confine Pd ICs for greatly boosting the photocatalytic activity and stability of H2O2 photosynthesis. Both experimental and theoretical results reveal that strong electronegative fluorine can increase the metal-support interaction and optimize the d-band center of Pd ICs, thus significantly enhancing the stability and activity of photocatalytic H2O2. An optimal TAPT-TFPA COFs@Pd ICs photocatalyst delivers a stable H2O2 yield rate of 2143 μmol h-1 g-1. Most importantly, the as-made TAPT-TFPA COFs@Pd ICs exhibit high catalytic stability over 100 h, which is the best among the reported materials.

Synthesis of sp2 Carbon-Conjugated Covalent Organic Framework Thin-Films via Copper-Surface-Mediated Knoevenagel Polycondensation

sp2 carbon-conjugated covalent organic framework (sp2 c-COF) featured with high π-conjugation, high chemical stabilities, and designable chemical structures, are thus promising for applications including adsorption and separation, optoelectronic devices, and catalysis. For the most of these applications, large-area and continuous films are required. However, due to the needs of harsh conditions in the formation of CC bonds, classical interfacial methodologies are challenged in the synthesis of sp2 c-COFs films. Herein, a novel and robust interfacial method namely copper-surface-mediated Knoevenagel polycondensation (Cu-SMKP), is shown for scalable synthesis of sp2 c-COF films on various Cu substrates. Using this approach, large-area and continuous sp2 c-COF films could be prepared on various complicated Cu surfaces with thickness from tens to hundreds of nanometers. The resultant sp2 c-COF films on Cu substrate could be used directly as functional electrode for extraction of uranium from spiked seawater, which gives an exceptionally uptake capacity of 2475 mg g-1 . These results delineate significant synthetic advances in sp2 c-COF films and implemented them as functional electrodes for uranyl capture.

Thoughtful design of a covalent organic framework with tailor-made polarity and pore size for the enrichment of bisphenols and their derivatives: Extraction performance, adsorption mechanism and toxicity evaluation

A stable, reusable and cost-effective covalent organic framework (COF) with medium polarity was successfully decorated on Fe₃O₄. The Fe₃O₄@COF contained tailor-made polarity and pore size that fitted well with bisphenols and their derivatives (BPs). When coupling magnetic solid-phase extraction (MSPE) with high-performance liquid chromatography (HPLC) detection, the Fe₃O₄@COF featured efficient recognition and enrichment for BPs due to π-π stacking, C-H⋯π interactions, pore-filling effect, dispersion force and hydrophobic interactions. Under optimized conditions, calibration plots exhibited good linearity (5-1000 ng mL^-1), and limits of detection (LOD) ranged from 0.15 to 0.39 ng mL^-1. The method was successfully employed in quantifying BPs in authentic lake and river water samples with satisfactory recoveries ranging from 81.4% to 120%. Molecular dynamics simulation revealed extraction mechanisms, and a microscopic behavior related to the clustering property of the emerging brominated compounds was first discovered. Ecotoxicological assessments of target pollutants were conducted from multiple aspects, highlighting the harmfulness of the chemicals and the significance of the analytical method. The proposed methodology offered sensitive detection and quantification, which was beneficial for the timely tracking of the concentration, transportation and distribution of BPs to better explore their environmental behavior and tackle contamination problems in complex environmental matrices.

Guanidine-Functionalized Fluorescent sp2 Carbon-Conjugated Covalent Organic Framework for Sensing and Capture of Pd(II) and Cr(VI) Ions

Palladium is a key element in fuel cells, electronic industries, and organic catalysis. At the same time, chromium is essential in leather, electroplating, and metallurgical industries. However, their unpremeditated leakage into aquatic systems has caused human health and environmental apprehensions. Herein, we reported the development of an sp² carbon-conjugated fluorescent covalent organic framework with a guanidine moiety (sp² c-gCOF) that showed excellent thermal and chemical stability. The sp² c-gCOF showed effective sensing, capture, and recovery/removal of Pd(II) and Cr(VI) ions, which could be due to the highly accessible pore walls decorated with guanidine moieties. The fluorescent sp² c-gCOF showed higher selectivity for Pd(II) and Cr(VI) ions, with an ultra-low detection limit of 2.7 and 3.2 nM, respectively. The analysis of the adsorption properties with a pseudo-second-order kinetic model showed that sp² c-gCOF could successfully and selectively remove both Pd(II) and Cr(VI) ions from aqueous solutions. The polymer also showed excellent capture efficacy even after seven consecutive adsorption-desorption cycles. Hence, this study reveals the potential of fluorescent sp² c-gCOF for detecting, removing, and recovering valuable metals and hazardous ions from wastewater, which would be useful for economic benefit, environmental safety, human health, and sustainability. The post-synthetic modification of sp² c-COF with suitable functionalities could also be useful for sensing and extracting other water pollutants and valuable materials from an aqueous system.

Porous Materials for Water Purification

Water pollution is a growing threat to humanity due to the pervasiveness of contaminants in water bodies. Significant efforts have been made to separate these hazardous components to purify polluted water through various methods. However, conventional remediation methods suffer from limitations such as low uptake capacity or selectivity, and current water quality standards cannot be met. Recently, advanced porous materials (APMs) have shown promise in improved segregation of contaminants compared to traditional porous materials in uptake capacity and selectivity. These materials feature merits of high surface area and versatile functionality, rendering them ideal platforms for the design of novel adsorbents. This Review summarizes the development and employment of APMs in a variety of water treatments accompanied by assessments of task-specific adsorption performance. Finally, we discuss our perspectives on future opportunities for APMs in water purification.

Porous Covalent Organic Framework Based Hydrogen-Bond Nanotrap for the Precise Recognition and Separation of Gold

Utilizing weak interactions to effectively recover and separate precious metals in solution is of great importance but the practice remains a challenge. Herein, we report a novel strategy to achieve precise recognition and separation of gold by regulating the hydrogen-bond (H-bond) nanotrap within the pore of covalent organic frameworks (COFs). It is found that both COF-HNU25 and COF-HNU26 can efficiently capture Au^III with fast kinetics, high selectivity, and uptake capacity. In particular, the COF-HNU25 with the high density of H-bond nanotraps exhibits an excellent gold uptake capacity of 1725 mg g^-1 , which is significantly higher than that (219 mg g^-1 ) of its isostructural COF (COF-42) without H-bond nanostrap in the pores. Importantly, the uptake capacity is strongly correlated to the number of H-bonds between phenolic OH in the COF and [AuCl₄ ]^- in water, and multiple H-bond interactions are the key driving force for the excellent gold recovery and reusability of the adsorbent.

Hydroxy-Containing Covalent Organic Framework Combined with Nickel Ferrite as a Platform for the Recognition and Capture of Bisphenols

A hydroxy-containing covalent organic framework (COF) was successfully obtained via a simple nitrogen-purge synthetic procedure for the first time. The COF favored a serrated AA-stacking arrangement, which enhanced the stability compared with common AA or AB arrangements. To validate the potential of the COF in environmental applications, we decorated the COF onto NiFe₂O₄ and used the NiFe₂O₄@COF nanocomposite for magnetic solid-phase extraction of trace bisphenols (BPs). The parameters affecting extraction efficiencies were systematically optimized. Under the optimum extraction conditions, calibration plots showed good linearity (5.0-1.0 × 10³ ng mL^-1) for six BPs, and limits of detection varied from 0.14 to 0.73 ng mL^-1. Molecular polarity indexes and molecular dynamics simulations revealed why the COF could efficiently recognize and capture BPs. An adsorption mechanism related to the interaction between BP clusters and the COF was discovered. Ecotoxicological assessment of BPs further unraveled the significance of the developed method for the timely tracking of the concentration, distribution, and migration of BPs in environmental media.

Metal-Organic Framework Accelerated One-Step Capture and Reduction of Palladium to Catalytically Active Nanoparticles

Recovery of noble metals and in situ transforming to functional materials hold great promise in the sustainability of natural resources but remain as a challenge. Herein, the variable chemical microenvironments created by the inorganic-organic hybrid composition of metal-organic frameworks (MOFs) were exploited to tune the metal-support interactions, thus establishing an integrated strategy for recovering and reducing palladium (Pd). Assisted by sonic waves and alcoholic solvent, selective capture of Pd(II) from a complicated matrix to directly afford Pd nanoparticles (NPs) in MOFs can be achieved in one step within several minutes. Mechanism investigation reveals that the Pd binding site and the energy barriers between ionic and metallic status are sensitive to chemical environments in different frameworks. Thanks to the clean, dispersive, and uniform nature of Pd NPs, Pd@MOFs synthesized from a complicated environment exhibited high catalytic activity toward 4-nitrophenol reduction and Suzuki coupling reactions.

MXene-Derived 3D Defect-Rich TiO2@Reduced Graphene Oxide Aerogel with Ultrafast Carrier Separation for Photo-Assisted Uranium Extraction: A Combined Batch, X-ray Absorption Spectroscopy, and Density Functional Theory Calculations

Encapsulation of nano-semiconductor materials in three-dimensional (3D) adsorbents to build a typical semiconductor-adsorbent heterostructure is a forward-looking strategy for photo-assisted uranium extraction. Here, we develop 3D MXene-derived TiO₂(M)@reduced graphene oxide (RGO) aerogel for photo-assisted uranium extraction. Theoretical simulations demonstrate that oxygen vacancies on TiO₂(M) tailor the energy level structure and enhance the electron accumulation at gap states of TiO₂(M), thereby further realizing the spatial separation efficiency of electron-hole pairs by the Schottky junction. By virtue of the in situ X-ray photoelectron spectroscopy spectrum, we identify that photogenerated electrons generated over TiO₂(M) were transferred to graphene oxide aerogel by the Schottky junction. Accordingly, TiO₂ (M)@RGO aerogel presents a considerable removal efficiency for U(VI) with a removal ratio of 95.7%. Relying on the X-ray absorption spectroscopy technique, we distinguish the evolution of 2H₂O-2O_ax-U-5O_eq into H₂O-2O_ax-U-3O_eq from dark to light conditions, further confirming the reduction of high-valent uranium. This strategy may open a paradigm for developing novel heterojunctions as photocatalysts for selective U(VI) extraction.

A rare potassium-rich zirconium fluorophosphonate with high Eu3+ adsorption capacities from acidic solutions

A novel 3D potassium-containing zirconium fluorophosphonate K2Zr[CH2(PO3)2]F2 (SZ-8) was successfully synthesized as single crystals via a solvothermal method using the mixture of nitric acid and potassium nitrate as mineralizers. SZ-8...