Recent advances on nickel nano-ferrite: A review on processing techniques, properties and diverse applications

Toxicological investigations of biosynthesized nickel ferrites nanoparticles on midgut epithelium of Blaps polychresta as nanopesticides: Structural damages and oxidative stress

The development of eco-friendly insecticides with the ability to overcome insecticide resistance remains a thorny issue. This study therefore intends to evaluate the effectiveness of green synthesized nickel ferrite nanoparticles (NiFe2O4 NPs) as nanopesticides in this first report using darkling beetles, Blaps polychresta, as a model. The biosynthesized NiFe2O4 NPs were characterized employing various approaches, including FTIR, UV-Vis spectroscopy, XRD, XPS, and VSM. The morphological features and size of the nanoparticles were determined adopting SEM and TEM analyses, revealing that NiFe2O4 NPs have an average size of 24.59 nm with a quasi-spherical shape. The beetles treated with NiFe2O4 NPs showed their accumulation in midgut tissues, as evidenced by EDX analysis. Accumulation of NiFe2O4 NPs in midgut epithelium induced surplus reactive oxygen species (ROS) production, engendering elevated MDA level linked with increased expression of MT1 and HSP70. Besides, decreased GST, SOD, and GSH activities were also reported. These findings indicate antioxidant defense systems malfunction due to failure of NiFe2O4 NPs detoxification. Beyond that, comet assay and flow cytometry analysis exhibited noticeable amplifications of DNA impairment and cellular apoptosis, respectively, in beetles treated with NiFe2O4 NPs compared to untreated beetles. Pathohistological and ultrastructure investigations showed various aberrations in beetles exposed to NiFe2O4 NPs, including rapture of midgut epithelium and necrotic signs, substantiating the biochemical findings. These findings suggest that NiFe2O4 NPs could be implemented in agricultural practices as a sustainable insecticidal candidate to manage insect pests. Further studies are required to investigate NiFe2O4 NPs interaction with environmental conditions.

Fabrication of biosynthesized nickel ferrites nanoparticles and evaluation of their insecticidal efficacy on beetles (Blaps polychresta) testicular integrity

Green synthesis of nanoparticles has emerged as a significant strategy to develop effective and eco-friendly insecticide agents to combat insecticide resistance and preserve environmental integrity and biodiversity. This study was thus designed to fabricate novel green synthesized NiFe2O4 nanoparticles (NiFe NPs) and investigate their potential insecticidal effects for the first time using Blaps polychresta beetle as an agricultural coleopteran pest model. Therefore, we prepared NiFe NPs following the hydrothermal synthesis procedure in the presence of lemon juice. The physiochemical characteristics of NiFe NPs were investigated employing SEM, TEM, FT-IR, XRD, TGA, VSM, and UV-Vis analysis. The lowest and most effective dose of NiFe NPs against male beetles was ascertained at a concentration of 0.03 mg/g body weight, reporting 67% mortality after 48 h. To study the insecticidal impact of NiFe NPs, EDX analysis demonstrated the bioaccumulation of NiFe NPs in testicular tissues of beetles, leading to pathophysiological consequences. Precisely, the oxidative stress incited by NiFe NPs led to disturbance of the antioxidant defense system, which was defined by augmentation of lipid peroxidation and suppression of antioxidant enzymes. Furthermore, the comet assay exhibited remarkable DNA impairment, while flow cytometry analysis showed substantial cellular necrosis and apoptosis in NiFe NPs-treated beetles compared to control insects. In correlation with these findings, several aberrations in the histological and ultrastructure attributes of testicular tissues were perceived, including impaired follicular and cyst walls, deteriorated parietal cells, necrosis, and vacuolations. These results implied that NiFe NPs triggered oxidative injury in the testes, resulting in male reproductive system dysfunction. Altogether, our findings accentuate the potential application of NiFe NPs as nanopesticides, paving the way for the sustainable and cost-effective management of insect pests in agriculture.

Thin Films of BaM Hexaferrite with an Inclined Orientation of the Easy Magnetization Axis: Crystal Structure and Magnetic Properties

Thin (~50 nm thick) BaM hexaferrite (BaFe12O19) films were grown on (1-102) and (0001) cut α-Al2O3 (sapphire) substrates via laser molecular beam epitaxy using a one- or two-stage growth protocol. The advantages of a two-stage protocol are shown. The surface morphology, structural and magnetic properties of films were studied using atomic force microscopy, reflected high-energy electron diffraction, three-dimensional X-ray diffraction reciprocal space mapping, powder X-ray diffraction, magneto-optical, and magnetometric methods. Annealed BaFe12O19/Al2O3 (1-102) structures consist of close-packed islands epitaxially bonded to the substrate. The hexagonal crystallographic axis and the easy axis (EA) of the magnetization of the films are deflected from the normal to the film by an angle of φ~60°. The films exhibit magnetic hysteresis loops for both in-plane Hin-plane and out-of-plane Hout-of-plane magnetic fields. The shape of Mout-of-plane(Hin-plane) and Min-plane(Hin-plane) hysteresis loops strongly depends on the azimuth θ of the Hin plane, confirming the tilted orientation of the EA. The Mout-of-plane(Hout-of-plane) magnetization curves are caused by the reversible rotation of magnetization and irreversible magnetization jumps associated with the appearance and motion of domain walls. In the absence of a magnetic field, the magnetization is oriented at an angle close to φ.

Development of a NiFe2O4 covalent organic framework based magnetic solid-phase extraction approach for specific capture of quinolones in animal innards prior to UHPLC-Q-Orbitrap HRMS detection

This study aimed to present a selective and effective method for analyzing quinolones (QNs) in food matrix. Herein, a NiFe2O4-based magnetic sodium disulfonate covalent organic framework (NiFe2O4/COF) was prepared using a simple solvent-free grinding method, and was adopted as a selective adsorbent for magnetic solid phase extraction of QNs. Coupled with UHPLC-Q-Orbitrap HRMS, an efficient method for simultaneous detection of 18 kinds of QNs was established. The method exhibited good linearity (0.01-100 ng g-1), high sensitivity (LODs ranging from 0.0011 to 0.0652 ng g-1) and precision (RSDs below 9.5%). Successful extraction of QNs from liver and kidney samples was achieved with satisfactory recoveries ranging from 82.2% to 108.4%. The abundant sulfonate functional groups on NiFe2O4/COF facilitated strong affinity to QNs through electrostatic and hydrogen bonding interactions. The proposed method provides a new idea for the extraction of contaminants with target selectivity.

Enhancing photocatalytic wastewater treatment: investigating the promising applications of nickel ferrite and its novel nanocomposites

Water contamination ranks highest among the challenges posed by the rapidly increasing environmental contamination, which is thought to be the most pressing issue globally. The development of innovative techniques for the successful removal of diverse types of undesirable pollutants from wastewater would therefore yield a huge return on investment. Nowadays, the removal of many organic and synthetic pollutants from the environmental matrix is anticipated to be possible by photocatalytic degradation, owing to its low energy consumption, high catalytic activity, and low overall cost. In this context, magnetic nanoparticles received greater attention as photocatalytic materials from the scientific community in wastewater treatment for the removal of different kinds of pollutants due to their specific properties. The present study provides an overview of the recent advances in water treatment using nickel ferrite nanoparticles and their nanocomposites as photocatalysts. Furthermore, a proposed mechanism for these photocatalysts to generate active free radicals under visible and ultraviolet light has been described. The review concludes that photocatalysts based on NiFe2O4 have potential applications in water purification technologies. However, more research is still needed to determine their practical application in water treatment facilities.

High-density polyethylene composites filled with micro- and nano-particles of nickel ferrite: magnetic, mechanical, and thermal properties

With the increasing demand of new magnetic materials for modern technological application alternatives to conventional magnetic materials, the development of lightweight polymer magnetic composites has become a prominent research area. For this perspective, a new magnetic material was developed using 30 wt% nickel ferrite micro and nanoparticles as fillers for a high-density polyethylene matrix. The development process began with the synthesis of NF-micro and NF-nanoparticles using solid-state and co-precipitation techniques, respectively, followed by extrusion molding and injection molding. The success of the synthesis process and the purity of the spinel structure phase were confirmed. Additionally, using the extrusion process produced polymer magnetic composite materials with a good distribution of magnetic particles within the polymer matrix, resulting in good magnetic properties and enhanced mechanical properties of the polymer magnetic materials.

Central Countries' and Brazil's Contributions to Nanotechnology

Abstract:

Nanotechnology is a cornerstone of the scientific advances witnessed over the past few years. Nanotechnology applications are extensively broad, and an overview of the main trends worldwide can give an insight into the most researched areas and gaps to be covered. This document presents an overview of the trend topics of the three leading countries studying in this area, as well as Brazil for comparison. The data mining was made from the Scopus database and analyzed using the VOSviewer and Voyant Tools software. More than 44.000 indexed articles published from 2010 to 2020 revealed that the countries responsible for the highest number of published articles are The United States, China, and India, while Brazil is in the fifteenth position. Thematic global networks revealed that the standing-out research topics are health science, energy, wastewater treatment, and electronics. In a temporal observation, the primary topics of research are: India (2020), which was devoted to facing SARS-COV 2; Brazil (2019), which is developing promising strategies to combat cancer; China (2018), whit research on nanomedicine and triboelectric nanogenerators; the United States (2017) and the Global tendencies (2018) are also related to the development of triboelectric nanogenerators. The collected data are available on GitHub. This study demonstrates the innovative use of data-mining technologies to gain a comprehensive understanding of nanotechnology's contributions and trends and highlights the diverse priorities of nations in this cutting-edge field.

Development of dispersive solid phase extraction based on magnetic metal organic framework for the extraction of sunitinib in biological samples and its determination by high performance liquid chromatography-tandem mass spectrometry

Herein, a simple, sensitive, and reliable dispersive solid phase extraction was reported for the efficient extraction of sunitinib from biological samples. To facilitate the extraction of the desired analyte from urine and plasma samples, magnetic MIL-101Cr (NH2) @SiO2 @ NiFe2O4 was synthesized by a hydrothermal method and applied as an effective sorbent during the extraction process. After adsorption of the drug using 10 mg of MIL-101Cr (NH2) @ SiO2 @ NiFe2O4 nanoparticles through vortexing (1 min), the sorbent was separatedfrom the sample solution using a magnet. To eluate the drug, the sorbent containing the sunitinib was contacted with 100 µL dimethylformamide. The eluent was analyzed by high performance liquid chromatography-tandem mass spectrometry. Reasonable validation data consisting of low limits of detection (0.14, 0.35, and 0.70 ng mL-1 in deionized water, plasma, and urine) and quantification (0.48, 1.2, and 2.4 ng mL-1 in deionized water, plasma, and urine, respectively), a wide linear range of the calibration curve (0.48-200, 1.2-200, and 2.4-100 ng mL-1 in deionized water, plasma, and urine, respectively) good extraction recovery (76 %), and low relative standard deviations for inter- and intra-day precisions (6.9 %) were obtained by the method. Eventually, the proposed procedure was effectively implemented on both plasma and urine samples, yielding successful outcomes.

Magnetic hydrogel applications in articular cartilage tissue engineering

Articular cartilage defects afflict millions of individuals worldwide, presenting a significant challenge due to the tissue's limited self-repair capability and anisotropic nature. Hydrogel-based biomaterials have emerged as promising candidates for scaffold production in artificial cartilage construction, owing to their water-rich composition, biocompatibility, and tunable properties. Nevertheless, conventional hydrogels typically lack the anisotropic structure inherent to natural cartilage, impeding their clinical and preclinical applications. Recent advancements in tissue engineering (TE) have introduced magnetically responsive hydrogels, a type of intelligent hydrogel that can be remotely controlled using an external magnetic field. These innovative materials offer a means to create the desired anisotropic architecture required for successful cartilage TE. In this review, we first explore conventional techniques employed for cartilage repair and subsequently delve into recent breakthroughs in the application and utilization of magnetic hydrogels across various aspects of articular cartilage TE.

Recent advances in zinc ferrite (ZnFe2O4) based nanostructures for magnetic hyperthermia applications

Spinel ferrite-based magnetic nanomaterials have been investigated for numerous biomedical applications, including targeted drug delivery, magnetic hyperthermia therapy (MHT), magnetic resonance imaging (MRI), and biosensors, among others. Recent studies have found that zinc ferrite-based nanomaterials are favorable candidates for cancer theranostics, particularly for magnetic hyperthermia applications. Zinc ferrite exhibits excellent biocompatibility, minimal toxicity, and more importantly, exciting magnetic properties. In addition, these materials demonstrate a Curie temperature much lower than other transition metal ferrites. By regulating synthesis protocols and/or introducing suitable dopants, the Curie temperature of zinc ferrite-based nanosystems can be tailored to the MHT therapeutic window, i.e., 43-46 °C, a range which is highly beneficial for clinical hyperthermia applications. Furthermore, zinc ferrite-based nanostructures have been extensively used in successful pre-clinical trials on mice models focusing on the synergistic killing of cancer cells involving magnetic hyperthermia and chemotherapy. This review provides a systematic and comprehensive understanding of the recent developments of zinc ferrite-based nanomaterials, including doped particles, shape-modified structures, and composites for magnetic hyperthermia applications. In addition, future research prospects involving pure ZnFe2O4 and its derivative nanostructures have also been proposed.

Nanocomposites Based on Polyethylene and Nickel Ferrite: Preparation, Characterization, and Properties

Composite materials based on NiFe2O4 nanoparticles and polyethylene matrix have been synthesized by thermal decomposition to expand the application area of high-pressure polyethylene by filling it with nanoscale particles. The synthesized compositions were obtained in the form of a dark gray powder and compressed for further study According to TEM, the average particle size in composites was 2, 3, and 4 nm in samples with a filling of 10%, 20% and 30%. The concentration dependences of the specific electrical resistivity ρV, dielectric permittivity ε, saturation magnetization MS and the parameters of reflection and attenuation of microwave power of the obtained composites were investigated. The threshold for percolation in such materials is found to be within a concentration range of 20…30%. The electronic and atomic structure of composites was studied by methods of Mössbauer spectroscopy, X-ray diffraction and X-ray absorption spectroscopy. The closest atomic environment of nickel and iron in nanoparticles is close to that of crystalline NiFe2O4. The dependence of the nanoparticles size as well as the dependence of the number of tetrahedral or octahedral iron positions in nickel ferrite nanoparticles to their content in polyethylene matrix is established. It is shown that composite materials based on NiFe2O4 nanoparticles and polyethylene matrix can be used as components of electromagnetic compatibility systems.

Crystal structure and peculiarities of microwave parameters of Co1-xNixFe2O4 nano spinel ferrites

Nanosized spinel ferrites Co1-xNixFe2O4 (where x = 0.0-1.0) or CNFO have been produced using a chemical method. The crystal structure's characteristics have been determined through the utilization of X-ray diffraction (XRD). It has been demonstrated that all samples have a single phase with cubic syngony (space group Fd3̄m). The lattice parameter and unit cell volume behavior correlate well with the average ionic radii of Co2+ and Ni2+ ions and their coordination numbers. Thus, an increase in the Ni2+ content from x = 0.0 to x = 1.0 leads to a decrease in the lattice parameter (from 8.3805 to 8.3316 Å) and unit cell volume (from 58.86 to 57.83 Å3). Elastic properties have been investigated using Fourier transform infrared (FTIR) analysis. The peculiarities of the microwave properties have been analyzed by the measured S-parameters in the range of 8-18 GHz. It was assumed that the energy losses due to reflection are a combination of electrical and magnetic losses due to polarization processes (dipole polarization) and magnetization reversal processes in the region of inter-resonant processes. A significant attenuation of the reflected wave energy (-10 … -21.8 dB) opens broad prospects for practical applications.

Review on magnetic spinel ferrite (MFe2O4) nanoparticles: From synthesis to application

Magnetic spinel ferrite materials offer various applications in biomedical, water treatment, and industrial electronic devices, which has sparked a lot of attention. This review focuses on the synthesis, characterization, and applications of spinel ferrites in a variety of fields, particularly spinel ferrites with doping. Spinel ferrites nanoparticles doped with the elements have remarkable electrical and magnetic properties, allowing them to be used in a wide range of applications such as magnetic fields, microwave absorbers, and biomedicine. Furthermore, the physical properties of spinel ferrites can be modified by substituting metallic atoms, resulting in improved performance. The most recent and noteworthy applications of magnetic ferrite nanoparticles are reviewed and discussed in this review. This review goes over the synthesis, doping and applications of different types of metal ferrite nanoparticles, as well as views on how to choose the appropriate magnetic ferrites based on the intended application.

Sustainable Cellulose Nanofibers-Mediated Synthesis of Uniform Spinel Zn-Ferrites Nanocorals for High Performances in Supercapacitors

Spinel ferrites are versatile, low-cost, and abundant metal oxides with remarkable electronic and magnetic properties, which find several applications. Among them, they have been considered part of the next generation of electrochemical energy storage materials due to their variable oxidation states, low environmental toxicity, and possible synthesis through simple green chemical processing. However, most traditional procedures lead to the formation of poorly controlled materials (in terms of size, shape, composition, and/or crystalline structure). Thus, we report herein a cellulose nanofibers-mediated green procedure to prepare controlled highly porous nanocorals comprised of spinel Zn-ferrites. Then, they presented remarkable applications as electrodes in supercapacitors, which were thoroughly and critically discussed. The spinel Zn-ferrites nanocorals supercapacitor showed a much higher maximum specific capacitance (2031.81 F g^-1 at a current density of 1 A g^-1) than Fe₂O₃ and ZnO counterparts prepared by a similar approach (189.74 and 24.39 F g^-1 at a current density of 1 A g^-1). Its cyclic stability was also scrutinized via galvanostatic charging/discharging and electrochemical impedance spectroscopy, indicating excellent long-term stability. In addition, we manufactured an asymmetric supercapacitor device, which offered a high energy density value of 18.1 Wh kg^-1 at a power density of 2609.2 W kg^-1 (at 1 A g^-1 in 2.0 mol L^-1 KOH electrolyte). Based on our findings, we believe that higher performances observed for spinel Zn-ferrites nanocorals could be explained by their unique crystal structure and electronic configuration based on crystal field stabilization energy, which provides an electrostatic repulsion between the d electrons and the p orbitals of the surrounding oxygen anions, creating a level of energy that determines their final supercapacitance then evidenced, which is a very interesting property that could be explored for the production of clean energy storage devices.

β-cyclodextrin-functionalized magnetic graphene oxide for the efficient enrichment of bisphenols in milk and milk packaging

In this work, β-cyclodextrin-functionalized magnetic graphene oxide (NiFe₂O₄@GO@β-CD) was synthesized and employed as magnetic solid-phase extraction adsorbent for the extraction of bisphenols before high performance liquid chromatography analysis. The modification of β-cyclodextrin could enhance the adsorption performance of NiFe₂O₄@GO@β-CD towards bisphenols through the host-guest interaction and hydrogen-bond interaction. Under the optimal conditions, good linearities between peak area and concentration of bisphenols (1 - 300 μg L^-1, r ≥ 0.9989) were obtained with the limits of detection (S/N = 3) in the range of 0.050 - 0.10 μg L^-1. The recoveries of bisphenols in milk and milk packaging ranged from 78.0% to 101.6%. Moreover, NiFe₂O₄@GO@β-CD showed stable chemical properties and good reusability with the recoveries of bisphenols remained above 80.0% after 12 MSPE cycles. The adsorption characteristics of NiFe₂O₄@GO@β-CD towards bisphenols fitted well with the pseudo-second-order kinetic model and Langmuir model. The hydrogen-bond interaction, π-π interaction, host-guest interaction and electrostatic interaction between sorbent and bisphenols played important role during the adsorption process. The developed method showed potential applications for the analysis of trace bisphenols in milk and milk packaging.

Design and Development of Novel Composites Containing Nickel Ferrites Supported on Activated Carbon Derived from Agricultural Wastes and Its Application in Water Remediation

Recently, efficient decontamination of water and wastewater have attracted global attention due to the deficiency in the world's water sources. Herein, activated carbon (AC) derived from willow catkins (WCs) was successfully synthesized using chemical modification techniques and then loaded with different weight percentages of nickel ferrite nanocomposites (10, 25, 45, and 65 wt.%) via a one-step hydrothermal method. The morphology, chemical structure, and surface composition of the nickel ferrite supported on AC (NFAC) were analyzed by XRD, TEM, SEM, EDX, and FTIR spectroscopy. Textural properties (surface area) of the nanocomposites (NC) were investigated by using Brunauer-Emmett-Teller (BET) analysis. The prepared nanocomposites were tested on different dyes to form a system for water remediation and make this photocatalyst convenient to recycle. The photodegradation of rhodamine B dye was investigated by adjusting a variety of factors such as the amount of nickel in nanocomposites, the weight of photocatalyst, reaction time, and photocatalyst reusability. The 45NFAC photocatalyst exhibits excellent degradation efficiency toward rhodamine B dye, reaching 99.7% in 90 min under a simulated source of sunlight. To summarize, NFAC nanocomposites are potential photocatalysts for water environmental remediation because they are effective, reliable, and reusable.

Interfacial charge transfer of Carrisa edulis fruit extract capped Co3O4 nanoparticles on the surface of MK30: An efficient photocatalytic removal of methylthioninium chloride and tetracycline organic pollutants

The in-depth usage of organic pollutants by pharmaceutical industries constitutes a major contaminant to the bodies of water due to their solubility, great mobility, ability to get attached to water bodies for a long period of time, and low biodegradability. Due to these, it may further cause disease and change the ecosystem of aqueous and other living organisms. Accordingly, effective removal of organic contaminants from waste water is a vital step in reducing the hazards. Photocatalysis is a potential technique for removing hazardous organic pollutants from wastewater. In this work, a simple ultra-sonication assisted approach, a series of Carrisa edulis fruit extract capped Co₃O₄ nanoparticles decorated on Montmorillonite K30 nanosheets (Co₃O₄/MK30) were prepared. The inherent physicochemical appearance and optical properties of as-prepared nanomaterials were investigated using a variety of analytical techniques. TEM analysis depicted the spherical shape of the Co₃O₄ NPs with the size of 11.25 nm. The degradation of methylthioninium chloride as a dye and tetracycline drug pollutants has been investigated in this study using individual and simultaneous photocatalysis systems in the presence of pure Co₃O₄ NPs and different ratios of Co₃O₄/MK30 nanocomposites. Owing to the generation of OH and O₂ radicals, the 20% loaded Co₃O₄ on MK30 had the best photocatalytic performance of methylthioninium chloride (98.12%) and tetracycline degradation (87.4%), on exposing it to visible light. This research introduces a new design for MK30-based nanomaterials and proposes its use in environmental challenges.

Recent Advances in the Development of Novel Iron–Copper Bimetallic Photo Fenton Catalysts

Advanced oxidation processes (AOPs) have been postulated as viable, innovative, and efficient technologies for the removal of pollutants from water bodies. Among AOPs, photo-Fenton processes have been shown to be effective for the degradation of various types of organic compounds in industrial wastewater. Monometallic iron catalysts are limited in practical applications due to their low catalytic activity, poor stability, and recyclability. On the other hand, the development of catalysts based on copper oxides has become a current research topic due to their advantages such as strong light absorption, high mobility of charge carriers, low environmental toxicity, long-term stability, and low production cost. For these reasons, great efforts have been made to improve the practical applications of heterogeneous catalysts, and the bimetallic iron–copper materials have become a focus of research. In this context, this review focuses on the compilation of the most relevant studies on the recent progress in the application of bimetallic iron–copper materials in heterogeneous photo–Fenton-like reactions for the degradation of pollutants in wastewater. Special attention is paid to the removal efficiencies obtained and the reaction mechanisms involved in the photo–Fenton treatments with the different catalysts.

Magnetic Behavior of Virgin and Lithiated NiFe2O4 Nanoparticles

A series of virgin and lithia-doped Ni ferrites was synthesized using egg-white-mediated combustion. Characterization of the investigated ferrites was performed using several techniques, specifically, X-ray Powder Diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and High-resolution transmission electron microscopy (HRTEM). XRD-based structural parameters were determined. A closer look at these characteristics reveals that lithia doping enhanced the nickel ferrite lattice constant (a), unit cell volume (V), stress (ε), microstrain (σ), and dislocation density (δ). It also enhanced the separation between magnetic ions (LA and LB), ionic radii (rA, rB), and bond lengths (A-O and B-O) between tetrahedral (A) and octahedral (B) locations. Furthermore, it enhanced the X-ray density (Dx) and crystallite size (d) of random spinel nickel ferrite displaying opposing patterns of behavior. FTIR-based functional groups of random spinel nickel ferrite were determined. HRTEM-based morphological properties of the synthesized ferrite were investigated. These characteristics of NiFe2O4 particles, such as their size, shape, and crystallinity, demonstrate that these manufactured particles are present at the nanoscale and that lithia doping caused shape modification of the particles. Additionally, the prepared ferrite’s surface area and total pore volume marginally increased after being treated with lithia, depending on the visibility of the grain boundaries. Last, but not least, as the dopant content was increased through a variety of methods, the magnetization of virgin nickel ferrite fell with a corresponding increase in coercivity. Uniaxial anisotropy, rather than cubic anisotropy, and antisite and cation excess defects developed in virgin and lithia-doped nickel ferrites because the squareness ratio (Mr/Ms) was less than 0.5. Small squareness values strongly recommend using the assessed ferrites in high-frequency applications.

Solar light induced photocatalytic degradation of tetracycline in the presence of ZnO/NiFe2O4/Co3O4 as a new and highly efficient magnetically separable photocatalyst

In this study, a new solar light-driven magnetic heterogeneous photocatalyst, denoted as ZnO/NiFe₂O₄/Co₃O₄, is successfully prepared. FT-IR, XPS, XRD, VSM, DRS, FESEM, TEM, EDS, elemental mapping, and ICP analysis are accomplished for full characterization of this catalyst. FESEM and TEM analyses of the photocatalyt clearly affirm the formation of a hexagonal structure of ZnO (25–40 nm) and the cubic structure of NiFe₂O₄ and Co₃O₄ (10–25 nm). Furthermore, the HRTEM images of the photocatalyst verify some key lattice fringes related to the photocatalyt structure. These data are in very good agreement with XRD analysis results. According to the ICP analysis, the molar ratio of ZnO/NiFe₂O₄/Co₃O₄ composite is obtained to be 1:0.75:0.5. Moreover, magnetization measurements reveals that the ZnO/NiFe₂O₄/Co₃O₄ has a superparamagnetic behavior with saturation magnetization of 32.38 emu/g. UV-vis DRS analysis indicates that the photocatalyst has a boosted and strong light response. ZnO/NiFe₂O₄/Co₃O₄, with band gap energy of about 2.65 eV [estimated according to the Tauc plot of (αhν)²vs. hν], exhibits strong potential towards the efficacious degradation of tetracycline (TC) by natural solar light. It is supposed that the synergistic optical effects between ZnO, NiFe₂O₄, and Co₃O₄ species is responsible for the increased photocatalytic performance of this photocatalyst under the optimal conditions (photocatalyst dosage = 0.02 g L⁻¹, TC concentration = 30 mg L⁻¹, pH = 9, irradiation time = 20 min, and TC degradation efficiency = 98%). The kinetic study of this degradation process is evaluated and it is well-matched with the pseudo-first-order kinetics. Based on the radical quenching tests, it can be perceived that ^•O₂⁻ species and holes are the major contributors in such a process, whereas the ^•OH radicals identify to have no major participation. The application of this methodology is implemented in a facile and low-cost photocatalytic approach to easily degrade TC by using a very low amount of the photocatalyst under natural sunlight source in an air atmosphere. The convenient magnetic isolation and reuse of the photocatalyst, and almost complete mineralization of TC (based on TOC analysis), are surveyed too, which further highlights the operational application of the current method. Notably, this method has the preferred performance among the very few methods reported for the photocatalytic degradation of TC under natural sunlight. It is assumed that the achievements of this photocatalytic method have opened an avenue for sustainable environmental remediation of a broad range of contaminants.

Microwave-Enhanced Crystalline Properties of Zinc Ferrite Nanoparticles

Two series of ZnFe₂O₄ mixed cubic spinel nanoparticles were prepared by a coprecipitation method, where a solution of Fe³⁺ and Zn²⁺ was alkalised by a solution of NaOH. While the first series was prepared by a careful mixing of the two solutions, the microwave radiation was used to enhance the reaction in the other series of samples. The effect of the microwave heating on the properties of the prepared particles is investigated. X-ray powder diffraction (XRD), ⁵⁷Fe Mössbauer spectroscopy and magnetometry were employed to prove the cubic structure and superparamagnetic behavior of the samples. The particle size in the range of nanometers was investigated by a transmission electron microscopy (TEM), and the N₂ adsorption measurements were used to determine the BET area of the samples. The stoichiometry and the chemical purity were proven by energy dispersive spectroscopy (EDS). Additionally, the inversion factor was determined using the low temperature Mössbauer spectra in the external magnetic field. The microwave heating had a significant effect on the mean coherent length. On the other hand, it had a lesser influence on the size and BET surface area of the prepared nanoparticles.

Aminoglycoside-mimicking carbonized polymer dots for bacteremia treatment

Bacteremia and associated bacterial sepsis are potentially fatal and occur when the host response to microbial invasion is impaired or compromised. This motivated us to develop carbonized polymer dots (CPDs_Man/AA) from a mixture of mannose (Man) and positively charged amino acids [AAs; lysine, arginine (Arg), or histidine] through a one-step mild pyrolysis procedure, which effectively inhibited drug-resistant bacterial strains isolated from septic patients. The as-prepared CPDs_Man/AA showed broad-spectrum antibacterial activity, including multidrug-resistant bacteria, even in human plasma. The minimal inhibitory concentration of CPDs_Man/Arg is ca. 1.0 μg mL^-1, which is comparable to or lower than those of other tested antibiotics (e.g., ampicillin, gentamicin, and vancomycin). In addition to directly disrupting bacterial membranes, the CPDs_Man/Arg feature a structure similar to aminoglycoside antibiotics that could bind to 16S rRNA, thereby blocking bacterial protein synthesis. In vitro cytotoxic and hemolytic assays demonstrated the high biocompatibility of the CPDs_Man/AA. In addition, in vivo studies on methicillin-resistant Staphylococcus aureus-infected mice treated with the CPDs_Man/Arg showed a significant decrease in mortality-even better than that of antibiotics. Overall, the synthesis of the CPDs_Man/AA is cost-efficient, straightforward, and effective for treating bacteremia. The polymeric features of the CPDs_Man/Arg, including cationic charges and specific groups, can be recognized as a safe and broad-spectrum biocide to lessen our reliance on antibiotics to treat systemic bacterial infections in the future.

Advances in the Synthesis and Application of Magnetic Ferrite Nanoparticles for Cancer Therapy

Cancer is among the leading causes of mortality globally, with nearly 10 million deaths in 2020. The emergence of nanotechnology has revolutionised treatment strategies in medicine, with rigorous research focusing on designing multi-functional nanoparticles (NPs) that are biocompatible, non-toxic, and target-specific. Iron-oxide-based NPs have been successfully employed in theranostics as imaging agents and drug delivery vehicles for anti-cancer treatment. Substituted iron-oxides (MFe2O4) have emerged as potential nanocarriers due to their unique and attractive properties such as size and magnetic tunability, ease of synthesis, and manipulatable properties. Current research explores their potential use in hyperthermia and as drug delivery vehicles for cancer therapy. Significantly, there are considerations in applying iron-oxide-based NPs for enhanced biocompatibility, biodegradability, colloidal stability, lowered toxicity, and more efficient and targeted delivery. This review covers iron-oxide-based NPs in cancer therapy, focusing on recent research advances in the use of ferrites. Methods for the synthesis of cubic spinel ferrites and the requirements for their considerations as potential nanocarriers in cancer therapy are discussed. The review highlights surface modifications, where functionalisation with specific biomolecules can deliver better efficiency. Finally, the challenges and solutions for the use of ferrites in cancer therapy are summarised.

Effect of Transition Metal Doping on the Structural, Morphological, and Magnetic Properties of NiFe2O4

Sol-gel route followed by thermal treatment was used to produce NiFe₂O₄ doped with transition metal ions (Zn²⁺, Mn²⁺, Co²⁺). The structural, morphological, and magnetic properties of the doped NiFe₂O₄ were compared with those of virgin NiFe₂O₄. The metal-glyoxylates’ formation and decomposition as well as the thermal stability of the doped and virgin ferrites were assessed by thermal analysis. The functional groups identified by Fourier-transform infrared spectroscopy confirmed the decomposition of metal nitrates, the formation and decomposition of precursors, and the formation of the SiO₂ matrix. The X-ray diffraction indicated that the sol-gel synthesis produced single-phase crystalline ferrites in case of virgin, Zn²⁺ and Co²⁺-doped Ni-ferrites. By doping with Mn²⁺, several secondary phases derived from the SiO₂ matrix accompanied the crystalline spinel ferrite. The crystallite sizes depended on the annealing temperature and type of doping ion. The gradual increase of lattice parameters suggested the uniform distribution of doping metal ions in the NiFe₂O₄ lattice. The saturation magnetization, remanent magnetizations, coercivity, and anisotropy were found to depend on the doping ion, annealing temperature, and particle size. The high saturation magnetization values of the obtained nanocomposites make them suitable for a wide range of applications in the field of sensors development and construction.