Determination of residual styrene monomer in polystyrene granules by gas chromatography–mass spectrometry

Rapid and Comprehensive Analysis of 41 Harmful Substances in Multi-Matrix Products by Gas Chromatography-Mass Spectrometry Using Matrix-Matching Calibration Strategy

Harmful substances in consumer goods pose serious hazards to human health and the environment. However, due to the vast variety of consumer goods and the complexity of their substrates, it is difficult to simultaneously detect multiple harmful substances in different materials. This paper presents a method for the simultaneous determination of 41 harmful substances comprising 17 phthalates (PAEs), 8 organophosphate flame retardants (OPFRs), and 16 polycyclic aromatic hydrocarbons (PAHs) in five types of products using the matrix-matching calibration strategy. The method employs an efficient ultrasonic extraction procedure using a mixture of dichloromethane and methylbenzene, followed by dissolution-precipitation and analysis through gas chromatography-mass spectrometry. Compared with previous experiments, we established a universal pretreatment method suitable for multi-matrix materials to simultaneously determine multiple harmful substances. To evaluate the effects of the matrix on the experimental results, we compared neat standard solutions and matrix-matching standard solutions. The results demonstrated that all compounds were successfully separated within 30 min with excellent separation efficiency. Additionally, the linear relationships of all analytes showed strong correlation coefficients (R2) of at least 0.995, ranging from 0.02 mg/L to 20 mg/L. The average recoveries of the target compounds (spiked at three concentration levels) were between 73.6 and 124.1%, with a relative standard deviation (n = 6) varying from 1.2% to 9.9%. Finally, we tested 40 different materials from consumer products and detected 16 harmful substances in 31 samples. Overall, this method is simple and accurate, and it can be used to simultaneously determine multiple types of hazardous substances in multi-matrix materials by minimizing matrix effects, making it an invaluable tool for ensuring product safety and protecting public health.

Dissolution-precipitation method concatenated sodium alginate/MOF-derived magnetic multistage pore carbon magnetic solid phase extraction for determination of antioxidants and ultraviolet stabilizers in polylactic acid food contact plastics

Antioxidants and UV stabilizers have some endocrine disrupting effects and liver toxicity. Both types of additives are still widely used in food contact plastics to improve the durability of plastic products. However, efficient and rapid detection of antioxidants and UV stabilizers has been a challenge due to the complexity of the plastic matrix and the low content of antioxidants and UV stabilizers. In this study, a sodium alginate/MOF-derived magnetic multistage pore carbon material (MIL-101(Fe)/SA-CAs) was developed, having the merits of abundant multistage pore structure, large specific surface area, and good magnetic separation properties. Thus, this material was selected as the sorbent for magnetic solid-phase extraction combined with a dissolution-precipitation method for the extraction and purification of antioxidants and UV stabilizers from polylactic acid food contact plastics. The extraction parameters such as sorbent type, sorbent dosage, sample solution pH, ionic strength, sorption time, elution solution type, volume, and time were investigated. Under the optimized conditions, all the analytes determined by UPLC-MS/MS showed good linear range (r > 0.99), detection limit (0.023-3.105 ng g-1), accuracy (70.6-102.3 %), and reproducibility (RSD<9.8 %). Further, the developed method was applied to determine the antioxidants and UV stabilizers in polylactic acid lunch boxes and straws, showing excellent applicability. The results showed that the antioxidants and UV stabilizers were detected in some of the samples, with a maximum detection of antioxidant 1010 at 7297 ng g-1. This study provided a sensitive, efficient, and environmentally friendly method for antioxidants and UV stabilizers in polylactic acid food contact plastics. The ideas for the design of environmentally friendly metal-organic frameworks and biomass composite multifunctional materials would promise in the sample pretreatment field for the emerging contaminants.

Setting new standards: Multiphasic analysis of microplastic mineralization by fungi

Plastic materials provide numerous benefits. However, properties such as durability and resistance to degradation that make plastic attractive for variable applications likewise foster accumulation in the environment. Fragmentation of plastics leads to the formation of potentially hazardous microplastic, of which a considerable amount derives from polystyrene. Here, we investigated the biodegradation of polystyrene by the tropical sooty mold fungus Capnodium coffeae in different experimental setups. Growth of C. coffeae was stimulated significantly when cultured in presence of plastic polymers rather than in its absence. Stable isotope tracing using 13C-enriched polystyrene particles combined with cavity ring-down spectroscopy showed that the fungus mineralized polystyrene traces. However, phospholipid fatty acid stable isotope probing indicated only marginal assimilation of polystyrene-13C by C. coffeae in liquid cultures. NMR spectroscopic analysis of residual styrene contents prior to and after incubation revealed negligible changes in concentration. Thus, this study suggests a plastiphilic life style of C. coffeae despite minor usage of plastic as a carbon source and the general capability of sooty mold fungi to stimulate polystyrene mineralization, and proposes new standards to identify and unambiguously demonstrate plastic degrading capabilities of microbes.

Role of Residual Monomers in the Manifestation of (Cyto)toxicity by Polystyrene Microplastic Model Particles

Polystyrene (PS) is an important model polymer for the investigation of effects of microplastic (MP) and nanoplastic (NP) particles on living systems. Aqueous dispersions of PS MP or NP contain residual monomers of styrene. In consequence, it is not clear if the effects observed in standard (cyto)toxicity studies are evoked by the polymer (MP/NP) particle or by residual monomers. We addressed that question by comparing standard PS model particle dispersions with in-house synthesized PS particle dispersions. We proposed a rapid purification method of PS particle dispersions by dialysis against mixed solvents and developed a simple method of UV-vis spectrometry to detect residual styrene in the dispersions. We found that standard PS model particle dispersions, which contain residual monomers, exerted a low but significant cytotoxicity on mammalian cells, while the in-house synthesized PS, after rigorous purification to reduce the styrene content, did not. However, the PS particles per se but not the residual styrene in both PS particle dispersions resulted in immobilization of Daphnia. Only by using freshly monomer-depleted particles, will it be possible in the future to assess the (cyto)toxicities of PS particles, avoiding an otherwise not controllable bias effect of the monomer.

Residual additives in marine microplastics and their risk assessment - A critical review

This review summarizes the current state of knowledge regarding the risk assessment of plastic-associated residual additives, i.e. residual monomers, degradation products and additives, in the marine environment, also considering effects of weathering and bioavailability. Experimental studies have found a number of organic and metal additive compounds in leachates from plastics, and the analysis of weathered plastic particles, such as polyethylene, polypropylene and polystyrene particles sampled on beaches and shorelines, has identified residual additives, such as flame retardants, plasticizers, UV stabilizers and antioxidants. While the transfer of e.g. PBDEs to organisms upon ingestion has been demonstrated, studies on uptake and bioaccumulation of plastic-associated chemicals are inconclusive. Studies on hazard and risk assessments are few, and focus on monomers and/or a limited number of high concentration additives, such as phthalates and flame retardants. The risk assessment results vary between low, moderate and high risks of specific additives, and are not necessarily consistent for the same compound. Given the large number of chemicals potentially introduced into the marine environment with plastic particles and the challenges associated with the correct quantification of exposure concentrations and toxicity thresholds, the question arises whether new risk assessment concepts may be needed.

Abundance and characteristics of microplastics in sediments from the world's longest natural beach, Cox's Bazar, Bangladesh

This study aimed to provide the first description of the presence, quantity, and diversity of microplastics (MPs) in intertidal sediments from the world's longest natural beach, Cox's Bazar. MPs were extracted from 24 surficial sediment samples through the density separation method, and identification was carried out using a stereomicroscope. Results showed that the abundance of MPs varied from 200 to 378.8 items kg^-1 with the mean abundance of 368.68 ± 10.65 items kg^-1. Fibers were the dominant (53%) MPs in this study, followed by films (20%) and fragments (12%). The dominant plastic particle color was purple (18%), followed by pink (14%) and red (7%), with shapes that were mainly filamentous (53%) and irregular (41%). The majority (59%) of the MPs measured were 1-5 mm in size, followed by 0.5-1 mm (27%) and <0.5 mm (14%).

Risk assessment of added chemicals in plastics in the Danish marine environment

A risk assessment framework for direct exposure of residual additives and monomers present in ingested plastic particles, including microplastics, in the Danish marine environment, was presented. Eight cases of different polymer types and product groups were defined that represent the most significant exposures, and thus potential high-risk cases, towards marine organisms. Risk Quotients (RQ) were calculated for three trophic levels, i.e. pelagic/planktonic zooplankton: copepod, benthopelagic fish: Atlantic cod and seabird: northern fulmar. European and Danish Environmental Quality Standard (EQS) values were used as Predicted No-Effect Concentrations (PNEC). RQ larger than unity, indicating potential risks, were found for copepod and cod (pelagic community) and the flame-retardant pentabromodiphenyl ether (PeBDE) used in polyurethane (PUR), the biocide tributyltin (TBT) present as impurity in polyvinylchloride (PVC) and PUR, and the flame-retardant hexabromocyclododecane (HBCDD) used in expanded polystyrene (EPS). A potential risk was found for fulmar (secondary poisoning) and PeBDE used in PUR.

Polyester-based biodegradable plastics: an approach towards sustainable development

Non-degradability of conventional plastics, filling of landfill sites, raising water and land pollution and rapid depletion of fossil resources have raised the environmental issues and global concerns. The current demand and production of plastics is putting immense pressure on fossil resources, consuming about 6% of the global oil and is expected to grow up to 20%. The polyester-based biodegradable plastics (BPs) are considered as a remedy to the issue of plastics waste in the environment. BPs appear to manage the overflow of plastics by providing new means of waste management system and help in securing the non-renewable resources of nature. This review comprehensively presents the environmental burdens due to conventional plastics as well as production of polyester-based BPs as an alternative to conventional commodity plastics. The diversity of micro-organisms and their enzymes that degrade various polyester-based BPs (PLA, PCL, PHB/PHBV and PET) has also been described in detail. Moreover, the impact of plastics degradation products on soil ecology and ecosystem functions has critically been discussed. The report ends with special focus on future recommendations for the development of sustainable waste management strategies to control pollution due to plastics waste. SIGNIFICANCE AND IMPACT OF THE STUDY: Polyester-based BPs considered as a solution to current plastic waste problem as well as leading polymers in terms of biodegradability and sustainability has been critically discussed. The role of microorganisms and their enzymes involved in the biodegradation of these polymers and ecotoxicological impact of degradation products of BPs on soil microbial community and biogeochemical cycles has also been described. This report will provide an insight on the key research areas to bridge the gap for development of simulated systems as an effective and emerging strategy to divert the overflow of plastic in the environment as well as for the greener solution to the plastic waste management problems.

Polystyrene microplastic particles: In vitro pulmonary toxicity assessment

Microplastics (MPs) have become a global environmental concern. Recent studies have shown that MPs, of which the predominant type is often polystyrene (PS; known as PS-MPs), can extend to and affect remote, sparsely inhabited areas via atmospheric transport. Although exposure to inhaled MPs may induce lung dysfunction, further experimental verification of the pulmonary toxic potential of MPs and the mechanism underlying the toxicity is needed. Here we used normal human lung epithelial BEAS-2B cells to clarify the association between pulmonary toxicity and PS-MPs. Results revealed that PS-MPs can cause cytotoxic and inflammatory effects in BEAS-2B cells by inducing reactive oxygen species formation. PS-MPs can decrease transepithelial electrical resistance by depleting zonula occludens proteins. Indeed, decreased α1-antitrypsin levels in BEAS-2B cells suggest that exposure to PS-MPs increases the risk for chronic obstructive pulmonary disease, and high concentrations of PS-MPs can induce these adverse responses. While low PS-MP levels can only disrupt the protective pulmonary barrier, they may also increase the risk for lung disease. Collectively, our findings indicate that PS-MP inhalation may influence human respiratory health.

Optimization of multi-residue method for targeted screening and quantification of 216 harmful chemicals in plastic children's toys by gas chromatography-tandem mass spectrometry analysis

Herein, we report a multi-residue method based on dissolution-precipitation extraction combined with gas chromatography-tandem mass spectrometry (GC-MS/MS) analysis for targeted screening and quantification of 216 harmful chemicals in plastic children's toys. We established a spectrogram database containing the first-order mass spectra of all analytes and their second-order mass spectra at different collision energies. Good separation was attained in less than 60 min. As a simple and low-cost extraction method, dissolution-precipitation exhibited good recoveries for the analytes in the plastic samples. The matrix-matched standard curves were accurate for analyte quantification in specific plastics due to the solvent effects and matrix effects. The limits of quantification range were 0.1 mg/kg to 10 mg/kg. A wide linear range of 0.1-200 mg/kg was also observed, with r²≥0.9924. The average recoveries ranged from 63.9% to 137.6%, and the relative standard deviation (n = 6) varied from 0.6% to 13.2%. Finally, 31 ABS actual toys and 30 PVC actual toys were detected and 20 analytes with contents ranging from 0.4 mg/kg to 172 mg/kg and 30 analytes from 0.8 mg/kg to 141,030 mg/kg were discovered respectively.

Abundance and characteristics of microplastics in the northern coastal waters of Surabaya, Indonesia

Microplastic distribution in waters gained increasing attention because of the discovery of microplastics in edible marine organisms. Microplastic size is small, and hence, it tends to float in the water column, thereby making it easy to enter and accumulate in the marine organism. Microplastic abundance is highly associated with the population density. The North Coast of Surabaya is the main area for community activities in East Java; therefore, it is highly vulnerable to receive microplastic input from the mainland. This study aimed to analyze the abundance, distribution, and characteristics of microplastics in the northern coastal waters of Surabaya. The study was conducted in March 2017. The results showed that the highest and lowest microplastic abundances were found in Lamong Bay. The microplastic characteristics in all stations showed that foam was the dominant form and polystyrene was the dominant type, with sizes of 500-1000 μm and 300-500 μm.

Simultaneous determination of 22 phthalate esters in polystyrene food-contact materials by ultra-performance convergence chromatography with tandem mass spectrometry

A method for the determination of 22 phthalate esters in polystyrene food-contact materials has been established using ultraperformance convergence chromatography with tandem mass spectrometry. In this method, 22 phthalate esters were analyzed in <3.5 min on an ACQUITY Tours 1-AA column by gradient elution. The mobile phase, the compensation solvent, the flow rate of mobile phase, column temperature, and automatic back pressure regulator pressure were optimized, respectively. There was a good linearity of 20 phthalate esters with a range of 0.05-10 mg/L, diisodecyl phthalate and diisononyl phthalate were 0.25-10 mg/L, and the correlation coefficients of all phthalates were higher than 0.99 and those of 16 phthalates were higher than 0.999. The limits of detection and the limits of quantification of 15 phthalates were 0.02 and 0.05 mg/kg, meanwhile diallyl phthalate, diisobutyl phthalate, dimethyl phthalate, di-n-butyl phthalate, and di(2-ethylhexyl) phthalate were 0.05 and 0.10 mg/kg, and diisodecyl phthalate and diisononyl phthalate were 0.10 and 0.25 mg/kg. The spiked recoveries were in the range of 76.26-107.76%, and the relative standard deviations were in the range of 1.78-12.10%. Results support this method as an efficient alternative to apply for the simultaneous determination of 22 phthalate esters in common polystyrene food-contact materials.

The plastic in microplastics: A review

Microplastics [MPs], now a ubiquitous pollutant in the oceans, pose a serious potential threat to marine ecology and has justifiably encouraged focused biological and ecological research attention. But, their generation, fate, fragmentation and their propensity to sorb/release persistent organic pollutants (POPs) are determined by the characteristics of the polymers that constitutes them. Yet, physico-chemical characteristics of the polymers making up the MPs have not received detailed attention in published work. This review assesses the relevance of selected characteristics of plastics that composes the microplastics, to their role as a pollutant with potentially serious ecological impacts. Fragmentation leading to secondary microplastics is also discussed underlining the likelihood of a surface-ablation mechanism that can lead to preferential formation of smaller sized MPs.

Current understanding of microplastics in the environment: Occurrence, fate, risks, and what we should do

Microplastics pollution has been documented in the global environment, including at sea, in freshwater and in atmospheric fallout. Ingestion of microplastics by multiple kinds of organisms has been reported and has received increasing attention, because microplastics not only act as a source of toxic chemicals but also a sink for toxic chemicals. To better understand the great concerns about microplastics and associated toxic chemicals potential exposed to the organisms ingesting the debris, we should know more about the occurrence, fate, and risks of microplastics in the environment. What we should do depends on this better understanding. Integr Environ Assess Manag 2017;13:476-482. © 2017 SETAC.

The behaviors of microplastics in the marine environment

Despite the pollution of microplastics being internationally recognized, the understanding of their behaviors in marine environment is still developing. Microplastics are ubiquitous in the marine environment, with the potential to cause harm to marine ecosystem. Here, we would classify the behaviors of microplastics as physical behaviors (i.e. migration, sedimentation and accumulation), chemical behaviors (i.e. degradation and adsorption) and biobehaviors (i.e. ingestion, translocation and biodegradation), and a further discussion on their behavioral mechanisms were presented to better understand their impacts for the marine environment.

Multiple headspace single-drop microextraction-a new technique for quantitative determination of styrene in polystyrene

Single-drop microextraction (SDME), an emerging miniaturised extraction technique, was for the first time combined with multiple headspace extraction (MHE) to enable the quantitative determination of volatiles in solid matrixes by SDME technique. The concept of multiple headspace single-drop microextraction (MHS-SDME) was then applied for quantitative determination of styrene in polystyrene (PS) samples. Good linearity for the multiple headspace extraction was obtained when the migration of styrene was facilitated by grinding the samples and incubating them for 1 h at 150 degrees C prior the first extraction. Two microlitres of butyl acetate was used as the single-drop microextraction solvent and the extraction time was 5 min per cycle. The relative standard deviation (RSD) for single-drop microextraction of styrene standard at n=6 was 7.6%. Linearity was shown for styrene concentrations between 0.005 and 0.75 microg/ml (R2=0.999). This corresponds to total amount of styrene between 0.1 and 15 microg. The limit of quantitation for styrene standard at S/N 10 was 0.005 microg/ml. The developed method was validated against and showed good agreement with an earlier reported dissolution-precipitation method.