Analysis of nicotinoid insecticides residues in honey by solid matrix partition clean-up and liquid chromatography–electrospray mass spectrometry

Silver Core Coated with Molecularly Imprinted Polymer as Adsorbent in Pipet-Tip Solid Phase Extraction for Neonicotinoids Determination from Coconut Water

In this work, we report an innovative adsorbent named Ag-MPS@MIP that has a core@shell structure, i.e., silver nanoparticles modified with 3-methacryloxypropyltrimethoxysilane as the core and molecularly imprinted polymer based on methacrylic acid as its shell. Thiamethoxam, imidacloprid, and acetamiprid were extracted from coconut water samples using Ag-MPS@MIP in pipet-tip solid phase, prior to high-performance liquid chromatography analysis. The separation was carried out on isocratic mode using a mobile phase consisting of C18 column (Phenomenex, 150 mm × 4.6 mm, 5 μm), ultrapure water acidified with 0.3% phosphoric acid:acetonitrile (78:22, v/v), flow rate at 1.0 mL min-1, injection volume of 10 μL, temperature of 25 °C, and wavelength at 260 nm. The adsorbent and precursor materials were properly characterized by different instrumental techniques. The main factors affecting the recovery of analytes from coconut water samples by pipet-tip solid phase were optimized, such as sample volume (250 μL), sample pH (pH = 5.0), ionic strength (1%, m/v), washing solvent (300 μL ultrapure water), volume and type of eluent (500 μL methanol), amount of adsorbent (15 mg), cycle of percolation-dispensing (1×), and reuse (5×). Thereby, the neonicotinoids presented extraction recoveries between 82.80 and 96.36%, enrichment factor of 5, linearity ranged from 15 to 4000 ng mL-1, correlation coefficient (r) > 0.99, limit of detection of 5 ng mL-1, satisfactory selectivity, stability, and proper precision (RSD%: 0.52-9.64%) and accuracy (RE%: -5.19-6.45%). The method was successfully applied to real samples of coconut water.

Method validation for simultaneous determination of four neonicotinoids in vegetables by liquid chromatography

Pesticides are widely employed to boost the production of vegetable crops, but their indiscriminate application leaves residue in the crops for long, even after harvesting. Among pesticides, neonicotinoids are the most commonly applied group of insecticides which are used on vegetables to defend against a variety of sucking pests. The purpose of this study was to validate an analytical approach focused on QuEChERS extraction for the validation and simultaneous determination of residues of four neonicotinoids (imidacloprid, clothianidin, acetamiprid and thiamethoxam) in six diverse crops such as cucumber, brinjal, tomato, beans, cabbage, and cauliflower. Insecticides were quantified using high-performance liquid chromatography (HPLC) fitted with a UV-Vis detector. Specificity, linearity, precision, accuracy, limit of detection, and the limit of quantification were all considered for validation. The fortification of the vegetables was done at three different levels (0.2, 0.3 and 0.5 µg mL^-1), for confirming the validity of the method adopted. The results demonstrated adequate recoveries ranging from 77.5 to 96.4% and good accuracy (RSDs between 0.3 and 8.9%). For all the insecticides, the approach had good linearity with R² ≥ 0.99. The limit of detection (LOD) and the limit quantification (LOQ) levels of all the four analytes were 0.05 µg mL^-1 and 0.2 µg mL^-1, respectively. The validation characteristics of the devised method are satisfactory in terms of specificity, linearity, precision, accuracy, limit of detection and limit of quantification and thus can be successfully employed for simultaneous determination of the neonicotinoids.

Phytotoxic effect of the insecticide imidacloprid in Phaseolus vulgaris L. plant and evaluation of its bioaccumulation and translocation by electrochemical methods

The objective of this work is to study the toxicological effect of the imidacloprid (IMD) on common bean plants (Phaseolus vulgaris L) when used at high doses and its quantification by electrochemical method. Common bean plants were exposed to increasing concentrations of IMD and the different plant tissues were subjected to various analyses. The IMD detection in different tissues of the bean plant was performed after extraction on the metallic silver electrode using square wave voltammetry. The analytical and calibration parameters (Slope, correlation coefficient, linear range, detection limit and relative standard deviation) were calculated for the different plant tissues. The effect of different doses (5.0 × 10^-3 to 5.0 × 10^-2 mol L^-1) of IMD was evaluated on germination, seedling (vigour, growth) and photosynthetic pigments in the bean plant. The results indicate that germination rate and seed vigour index reduced significantly (p ≤ 0.05) only in the applied concentrations above the recommended dose. A similar effect of IMD was observed on seedling development in term of roots length, plant length, number of leaves and number of nods. Concerning pigments content, chlorophyll a, b and total chlorophyll maximally decreased by 95.26%, 80.44% and 82.15% respectively at high applied dose. The bioaccumulation and translocation behaviour of IMD in bean plant was investigated, revealing that the IMD can be bioaccumulated in roots and can easily be translocated into stems and leaves.

Zeolite H-Beta as a Dispersive Solid-Phase Extraction Sorbent for the Determination of Eight Neonicotinoid Insecticides Using Ultra-High-Performance Liquid Chromatography—Tandem Mass Spectrometry

In this study, a dispersive solid-phase extraction (DSPE) pretreatment procedure using zeolite H-Beta as a sorbent was exploited for the determination of eight neonicotinoids in bottled water and honey products based on ultra-high-performance liquid chromatography–tandem mass spectrometry analysis. The zeolite H-Beta was demonstrated to be a suitable sorbent for neonicotinoid insecticides, even after 10 recycles of reuse. The method performance was evaluated by the linearity (R2 ≥ 0.998), recovery (71–108%), precision (0.1–7.8%), limit of detection (0.05–0.1 ng/mL) and limit of quantification (0.1–0.2 ng/mL), which suggested excellent stability and high sensitivity with the use of the DSPE procedure. The method was further successfully applied in the test of neonicotinoid insecticides in 34 samples. Zeolite H-Beta shows promise as an efficient and practical material for monitoring neonicotinoid insecticides in bottled water and multiplex honey matrices.

Glutathione and its dependent enzymes' modulatory responses to neonicotinoid insecticide sulfoxaflor induced oxidative damage in zebrafish in vivo

The use of neonicotinoid insecticides has progressively increased worldwide when compared with other insecticide groups. Due to this increase, non-target animal species such as fish are exposed to neonicotinoids from different sources, so they can be accumulated at trophic levels and cause various toxic effects by reaching humans. There are limited studies related to the toxic effects of neonicotinoid sulfoximine insecticides including sulfoxaflor on non-target species. The purpose of the present study was to evaluate the effects of sulfoxaflor on GSH-related antioxidants and to determine oxidative stress-producing effect of sulfoxaflor in the gill of zebrafish (Danio rerio). For this purpose, three sublethal concentrations of sulfoxaflor 0.87 mg/L (2.5% of 96 h LC50), 1.75 mg/L (5% of 96 h LC50), 3.51 mg/L (10% of 96 h LC50) of sulfoxaflor were exposed to zebrafish for 24, 48, and 96 h. GSH related antioxidants were evaluated by analyzing tGSH levels and GPx, GR, GST specific enzyme activities in the gill of zebrafish. The oxidative damage of sulfoxaflor on gill cells was determined by measuring TBARS levels. The results of this study demonstrated that sulfoxaflor activated GSH related antioxidants by increasing tGSH levels, GPx, GR enzyme activities and by diminishing GST enzyme activity in the gill of zebrafish. Sulfoxaflor also caused oxidative damage in the gill of zebrafish by increasing lipid peroxidation. In conclusion, this study indicated that sulfoxaflor led to oxidative stress and activation of GSH related antioxidants in the gill of zebrafish.

A low-background fluorescent aptasensor for acetamiprid detection based on DNA three-way junction-formed G-quadruplexes and graphene oxide

A simple fluorescence detection platform has been established for acetamiprid assay based on DNA three-way junctions (TWJs), which can triple the fluorescence signal without any other amplification. It is designed with three single-stranded DNAs (ssDNA), each of which contains one-third or two-thirds of the G-quadruplex sequence at each end. Upon the addition of acetamiprid, the conformation of the aptamer-containing double-stranded DNA (dsDNA) changes from its original conformation and releases a strand of ssDNA. This ssDNA, with the other two ssDNAs, can assemble into DNA TWJs, and the three pairs of the branched ends of the DNA TWJs are adjacent to each other, allowing them to form three units of G-quadruplexes. Hence, the fluorescence of N-methyl mesoporphyrin IX (NMM) is lighted by the nascent G-quadruplexes. Graphene oxide (GO) is then added to minimize the detection background by absorbing the free NMM and non-target-induced ssDNA. The proposed strategy can assay acetamiprid in a wide linear range of 0-500 nM with a detection limit of 5.73 nM. More importantly, this assay platform demonstrates high potential for acetamiprid assay in food control and environmental monitoring.

Determination of acetamiprid using electrochemiluminescent aptasensor modified by MoS2QDs-PATP/PTCA and NH2-UiO-66

A novel aptasensor has been fabricated based on the resonance energy transform (RET) system from MoS₂QDs-PATP/PTCA (donor) to NH₂-UiO-66 (acceptor). The electrochemiluminescence (ECL) signal of PTCA was greatly amplified due to the decoration of MoS₂QDs-PATP, and the NH₂-UiO-66 was utilized to label the signal probe DNA (pDNA), which hybridizes with the exposed aptamer anchored on the surface of MoS₂QDs-PATP/PTCA. With the target acetamiprid, the specific binding of acetamiprid to aptamer causes the connection between the donor and the acceptor to be interrupted and produce an "on" ECL signal. Thus, an "off-on" ECL sensing platform for sensitive and selective acetamiprid assay was designed. Under the optimal condition, the ECL signal of the aptasensor was found to be linearly related to the logarithm of the acetamiprid concentration ranging from 0.1 fM to 0.1 μM with a detection limit of 0.064 fM. More importantly, the recovery rate of the ECL aptasensor was calculated to be 98.7 ~ 106% with a RSD lower 5.1% for the residual acetamiprid assay in real food samples, which indicated that the aptasensor has high potential for practical applications.

Determination of Neonicotinoid Pesticides in Propolis with Liquid Chromatography Coupled to Tandem Mass Spectrometry

In this study, a method was developed for the determination of five neonicotinoid pesticides (acetamiprid, clothianidin, imidacloprid, thiacloprid, and thiamethoxam) in propolis. Two sample preparation methods were tested: solid-phase extraction and the quick, easy, cheap, effective, rugged, and safe (QuEChERS) method. The identities of analytes were confirmed using liquid chromatography-tandem mass spectrometry (LC-MS/MS) in the selected reaction monitoring mode. Solid-phase extraction resulted in cleaner extracts; therefore, the SPE-LC-MS/MS method was validated according to the SANTE protocol in triplicate at two spiking levels (10 ng/g and 50 ng/g). The average recoveries of analytes ranged from 61% to 101%, except for clothianidin (10-20%). The LOD ranged from 0.2 ng/g to 4.4 ng/g, whereas the LOQ was in the range of 0.8 ng/g-14.7 ng/g. In order to compensate for the matrix effect, matrix-matched calibration was used. Good accuracy (relative error: 1.9-10.4%) and good linearity (R² > 0.991) were obtained for all compounds. The optimised method was applied to 30 samples: 18 raw propolis and 12 ethanol tinctures. Acetamiprid, imidacloprid, and thiacloprid were detectable in seven samples but were still below the LOQ. This study is the first to report the determination of several neonicotinoid residues in propolis.

Overview of Analytical Methods for the Determination of Neonicotinoid Pesticides in Honeybee Products and Honeybee

Neonicotinoid pesticides are widely applied for controlling pests in a variety of agriculture crops. Due to the systemic distribution in plants, neonicotinoid pesticides have been found in nectar and pollen, which are the main source of food for the important pollinator honeybee. The risk of neonicotinoid residues in honeybee products and honeybee has caused great attention since their impacts on the environment, ecology, and food safety issues. These concerns require the accurate and sensitive determination of neonicotinoids and their metabolites in the honeybee products and honeybee. Since the trace residue level of neonicotinoid and the complexity of the samples, analysis of neonicotinoid targets in these important matrices is still a great challenge. The present review provides general overview of analytical methods for the determination of neonicotinoid pesticides and their metabolites in honeybee products and honeybee.

Electrochemical detection of thiamethoxam in food samples based on Co3O4 Nanoparticle@Graphitic carbon nitride composite

Thiamethoxam is a class of neonicotinoid insecticide widely used in agriculture. Due to their high water solubility, thiamethoxam can be transported to surface waters and have the potential to be toxic to human life. Herein, a simple and robust method is presented for the detection of thiamethoxam based on hydrothermally synthesized nanoparticles of cobalt oxide into the graphitic carbon nitride composite (Co₃O₄@g-C₃N₄ NC). The materials were well characterized by XRD, FT-IR, XPS, FESEM, HRTEM, EDX, and UV-vis which provide crystalline nature, structure, and composition. The impedance measurement shows an intimate electrode/electrolyte interface by casting Co₃O₄@g-C₃N₄ onto a screen-printed carbon electrode (SPCE), delivering an interfacial resistance as low as 12.5 Ωcm². The cyclic voltammetry and differential pulse voltammetry measurements exhibit the nanocomposite as a superior electrocatalyst for the electrochemical detection of thiamethoxam and achieved a low detection limit of 4.9 nM with a wide linear range of 0.01-420 μM. The present work also demonstrates a promising strategy for electrochemical detection of thiamethoxam in real samples such as potato and brown rice.

Rapid detection of pesticides in honey by solid-phase micro-extraction coupled with electrospray ionization mass spectrometry

Detection of pesticide residues in food samples is important for safeguarding food quality and safety. Conventional approaches for detection of pesticides in food samples typically involve labour-intensive and time-consuming sample pretreatment and chromatographic separation. In this study, solid phase micro-extraction fibres were used to rapidly extract and enrich pesticides in honey, a popular agricultural product with complex matrix, and then directly coupled with electrospray ionization mass spectrometry for qualitative and quantitative analysis. Three pesticides, ie, atrazine, benalaxyl, and pirimicarb, were investigated using the technique and their analytical performances were evaluated. The limits of detection and limits of quantitation of all the three pesticides could fulfil the cut-off values of the international standard. Linear calibration curves were constructed with good R² coefficients, and the accuracy and precision were in acceptable ranges for all the pesticides. The analysis time is much reduced, with only minimum sample preparation and no chromatographic separation involved. The technique is simple and easy to set up, and can be extended for analysis of other analytes and sample systems.

Multibranch Gold Nanoparticles as Surface-Enhanced Raman Spectroscopy Substrates for Rapid and Sensitive Analysis of Fipronil in Eggs

A sensitive strategy to rapidly detect fipronil residues in eggs using multibranch gold nanoparticles (AuNPs) as the substrate of surface-enhanced Raman spectroscopy (SERS) was investigated in this study. Under optimized conditions, fipronil molecules preferentially deposited on the multibranch gold nanoparticles with preferential (111) facet-oriented growth due to its low surface energy. This anisotropic growth promoted the increase of SERS "hot spots", inducing a huge enhancement of Raman signals of the fipronil. An external standard calibration method was employed for quantitative analysis, and the method was validated for linearity, sensitivity, repeatability and recovery. Good linearity were found in the concentration range of 10 ng/L~10 mg/L in fipronil acetone solution (R2 = 0.9916) and 8 × 10-5 mg/m2 to 0.8 mg/m2 on eggshells (R2 = 0.9906), respectively. The recovery rate based on acetone recovered fipronil on eggshells and in egg liquids was 80.13%~87.87%, and 81.34%~88.89%, respectively. The SERS assay was successfully used to monitor fipronil in eggs.

Influence of gold nanoparticles in different aggregation states on the fluorescence of carbon dots and its application

Herein, gold nanoparticles (Au NPs) in solution protected by various concentration of DNA at different aggregation states were found to have different quenching effect to the fluorescence of carbon dots (CDs). Au NPs wrapped up in more amount of DNA were able to quench the fluorescence of CDs more effectively, and vice versa. Based on this phenomenon, a facile and novel fluorescence sensing platform without labeling was constructed by designing the sequence of DNA as the aptamer of the detection target. With the addition of specific molecule, taking acetamiprid as representative, DNA was prior to bind with target and the Au NPs became less protected, leading to the fluorescence recovery of the CDs. Experimental results showed that the fluorescence of CDs was linearly recovered by acetamiprid in the concentration range of 7.8 × 10^-9-1.4 × 10^-6 mol/L, with the detection limit of 1.5 × 10^-9 mol/L. This promising sensor might provide a new aspect for exploring the versatile application of CDs in various fields.

Residue distribution and risk assessment of two macrocyclic lactone insecticides in green onion using micro-liquid-liquid extraction (MLLE) technique coupled with liquid chromatography tandem mass spectrometry

A micro-liquid-liquid extraction (MLLE) technique coupled with liquid chromatography tandem mass spectrometry (LC-MS/MS) analysis was established and validated to determine the residues of two macrocyclic lactone insecticides (spinetoram and spinosad) in green onion. The limit of quantification (LOQ) of the method, as demonstrated by the lowest acceptable recovery level, was 0.01 mg kg^-1, and the obtained recoveries were 78.3-93.4% with relative standard deviations (RSDs) < 12.5%. The method was then applied for analyzing field samples collected after treatment with the tested insecticides under Egyptian open-field condition. The decline pattern, terminal residues, and dietary risk assessment of spinetoram and spinosad residues in green onion were evaluated for food safety. Spinetoram and spinosad residues' decline in green onion followed first-order kinetics with the half-lives of 1.2 and 1.42 days, respectively. Based on the results, the required period to reach their respective maximum residue limits (MRLs) was 1 and 0 days for spinetoram and spinosad residues in green onion, respectively, which indicates a short persistence level and high degradation rate. The results suggest that there is no unacceptable chronic or acute risk to human health from the consumption of green onion treated with spinetoram and spinosad according to the uses considered.

Electrocatalytic activity of the metallic silver electrode for thiamethoxam reduction: application for the detection of a neonicotinoid in tomato and orange samples

BACKGROUND

Thiamethoxam (3-[(2-chloro-5-thiazolyl)methyl]tetrahydro-5-methyl-N-nitro-4H-1,3,5-oxadiazin-4-imine) belongs to a relatively new class of insecticides known as neonicotinoids, which can block irreversibly nicotinic acetylcholine receptors of the nervous system of insects. Its determination at trace levels is an acute analytical problem. Therefore, chromatography, spectroscopy, and electrochemical technics were reported. These last have several advantages (simple sensitive and less expensive). This work investigated the electro-reduction of Thiamethoxam using simple and rapid method in real samples using metallic silver electrode.

RESULTS

Silver particles, known as effective catalysts in the reduction of nitro groups, were studied to explore their roles in the shift of thiamethoxam peak potential. Cyclic voltammetry, Tafel plot and electrochemical impedance spectroscopy analysis suggest that metallic silver electrodes have a significantly greater electrocatalytic activity in thiamethoxam electroreduction than glassy carbon electrodes and carbon paste electrodes. The electrocatalytic activity of metallic silver electrodes in thiamethoxam reduction was investigated by cyclic voltammetry and chronoamperometry. A linear variation in cathodic current with the square root of the scan rate was observed, suggesting that the process is diffusion controlled. Several supporting electrolytes were tested, and the best results were obtained with Britton-Robinson (BR) buffer, pH 10.4. A linear relationship between peak current and concentration was found in the range from 1.0 × 10^-5 to 1.0 × 10^-4  mol L^-1 using square wave voltammetry (SWV) with a correlation coefficient of 0.994. The detection limit and quantification limit were 5.49 × 10^-6 and 1.83 × 10^-5  mol L^-1 , respectively.

CONCLUSION

Silve metallic electrode exhibits efficient catalytic activity towards the Thiamethoxam reduction. The proposed electrode was then used for the determination of thiamethoxam in tomato anad orage juice samples. © 2019 Society of Chemical Industry.

Aptamer-based Resonance Light Scattering for Sensitive Detection of Acetamiprid

In this work, an aptasensor-based resonance light-scattering (RLS) method was developed for the sensitive and selective detection of acetamiprid. The ABA (acetamiprid binding aptamer)-stabilized gold nanoparticles (ABA-AuNPs) were used as a probe. Highly specific single-strand DNA (ssDNA, i.e, aptamers) that bind to acetamiprid with high affinity were employed to discriminate other pesticides, such as edifenphos, kanamycin, metribuzin et. al. The sensing approach is based on a specific interaction between acetamiprid and ABA. Aggregation of AuNPs was specifically induced by the desorption of the ABA from the surface of AuNPs, which caused the RLS signal intensity to be enhanced at 700 nm. The alteration of AuNPs' aggregation has been successfully optimized by controlling several conditions. Under the optimal conditions, the RLS intensity changes (I/I0) of AuNPs were linearly correlated with the acetamiprid concentration in the range of 0 - 100 nM. The detection limit is 1.2 nM (3σ). This method had also been used for acetamiprid detection in lake water samples.

Characterization of the metabolic transformation of thiamethoxam to clothianidin in Helicoverpa armigera larvae by SPE combined UPLC-MS/MS and its relationship with the toxicity of thiamethoxam to Helicoverpa armigera larvae

In order to characterize the metabolic transformation of thiamethoxam (TMX) to clothianidin (CLO) in Helicoverpa armigera larvae and clarify its relationship with the insecticidal toxicity of TMX, method for determination of TMX and its metabolite clothianidin (CLO) residues in H. armigera larvae by solid phase extraction (SPE) combined UPLC-MS/MS was established. Following acetonitrile extraction and purification by SPE on florisil cartridge and C₁₈ cartridge sequently, and cleanup by PSA adsorption, TMX and CLO residues in H. armigera larvae were successfully determined by UPLC-MS/MS. By using the established method, the concentration-time curves of TMX and its metabolite CLO in H. armigera larvae in vivo and metabolism of TMX by microsome of H. armigera larvae midguts in vitro were studied. TMX was quickly eliminated from H. armigera larvae with the elimination half-life as 4.2h. Meanwhile, only a small amount of CLO was formed from TMX metabolism, with the maximum CLO level in H. armigera larvae only accounts for the metabolic transformation of 7.99% of TMX, at 10h after intravenous TMX administration. Our results suggested that the low insecticidal efficacy of TMX against H. armigera larvae was related with the rapidly elimination of TMX from H. armigera larvae, meanwhile, CLO as TMX metabolite at a very low level in vivo didn't contribute to TMX toxicity to H. armigera larvae. In H. armigera larvae, TMX didn't act as proinsecticide for CLO in insecticidal efficacy of TMX.

The exposure of honey bees (Apis mellifera; Hymenoptera: Apidae) to pesticides: Room for improvement in research

Losses of honey bees have been repeatedly reported from many places worldwide. The widespread use of synthetic pesticides has led to concerns regarding their environmental fate and their effects on pollinators. Based on a standardised review, we report the use of a wide variety of honey bee matrices and sampling methods in the scientific papers studying pesticide exposure. Matrices such as beeswax and beebread were very little analysed despite their capacities for long-term pesticide storage. Moreover, bioavailability and transfer between in-hive matrices were poorly understood and explored. Many pesticides were studied but interactions between molecules or with other stressors were lacking. Sampling methods, targeted matrices and units of measure should have been, to some extent, standardised between publications to ease comparison and cross checking. Data on honey bee exposure to pesticides would have also benefit from the use of commercial formulations in experiments instead of active ingredients, with a special assessment of co-formulants (quantitative exposure and effects). Finally, the air matrix within the colony must be explored in order to complete current knowledge on honey bee pesticide exposure.

Multi-Residue Analysis of Pesticide Residues in Crude Pollens by UPLC-MS/MS

A multi-residue method for the determination of 54 pesticide residues in pollens has been developed and validated. The proposed method was applied to the analysis of 48 crude pollen samples collected from eight provinces of China. The recovery of analytes ranged from 60% to 136% with relative standard deviations (RSDs) below 30%. Of the 54 targeted compounds, 19 pesticides were detected. The major detection rates of each compound were 77.1% for carbendazim, 58.3% for fenpropathrin, 56.3% for chlorpyrifos, 50.0% for fluvalinate, 31.3% for chlorbenzuron, and 29.2% for triadimefon in crude pollen samples. The maximum values of each pesticide were 4516 ng/g for carbendazim, 162.8 ng/g for fenpropathrin, 176.6 ng/g for chlorpyrifos, 316.2 ng/g for fluvalinate, 437.2 ng/g for chlorbenzuron, 79.00 ng/g for triadimefon, and so on. This study provides basis for the research on the risks to honeybee health.

Fabricating a novel label-free aptasensor for acetamiprid by fluorescence resonance energy transfer between NH2-NaYF4: Yb, Ho@SiO2 and Au nanoparticles

Rare earth-doped upconversion nanoparticles have promising potential in the field of pesticide detection because of their unique frequency upconverting capability and high detection sensitivity. This paper reports a novel aptamer-based nanosensor for acetamiprid detection using fluorescence resonance energy transfer (FRET) between NH2-NaYF4: Yb, Ho@SiO2 (UCNPs) and gold nanoparticles (GNPs). Herein, GNPs as acceptors efficiently quench the fluorescence of UCNPs and acetamiprid specifically interacts with acetamiprid binding aptamer (ABA), causing the conformation changes of ABA from random coil to hairpin structure. Accordingly, ABA no longer stabilizes the GNPs in salt solution, leading to the varying aggregation extent of GNPs. Thus, the fluorescence of UCNPs are proportionally recovered. Under the optimized conditions, the enhancement efficiency was observed to increase linearly with the concentration of acetamiprid from 50 nM to 1000 nM, resulting in a relatively low limit of 3.2 nM. Additionally, the aptasensor demonstrated high selectivity to similar structure pesticides such as imidacloprid and chlorpyrifos, and further confirmed its application capacity in adulterated tea samples.

A novel sensor for the detection of acetamiprid in vegetables based on its photocatalytic degradation compound

An electrochemical method for the indirect determination of acetamiprid was studied, using titanium dioxide photocatalysts coupled with a carbon paste electrode. The cyclic voltammetric results indicated that the photocatalytic degradation compound of acetamiprid had electroactivity in neutral solutions. The amount of acetamiprid was further indirectly determined by differential pulse anodic stripping voltammetric analysis as a sensitive detection technique. The experimental parameters were optimized with regard to the photocatalytic degradation time, pH of buffer solution, accumulation potential and accumulation time. Under optimal conditions, the proposed electrochemical method could detect acetamiprid concentrations ranging from 0.01 to 2.0μM, with a detection limit (3S/N) of 0.2nM. Moreover, the proposed method displays excellent selectivity, good reproducibility, and acceptable operational stability and can be successfully applied to acetamiprid determination in vegetable samples with satisfying results.

Label-free impedimetric aptasensor for detection of femtomole level acetamiprid using gold nanoparticles decorated multiwalled carbon nanotube-reduced graphene oxide nanoribbon composites

Gold nanoparticles (Au NPs) decorated multiwalled carbon nanotube-reduced graphene oxide nanoribbon (Au/MWCNT-rGONR) composites were synthesized by a one-pot reaction. By employing the resulting Au/MWCNT-rGONR composites as the support for aptamer immobilization, we developed an ultrasensitive label-free electrochemical impedimetric aptasensor for acetamiprid detection, which was based on that the variation of electron transfer resistance was relevant to the formation of acetamiprid-aptamer complex at the modified electrode surface. Compared with pure Au NPs and MWCNT-rGONR, the Au/MWCNT-rGONR composites modified electrode was the most sensitive aptasensing platform for the determination of acetamiprid. The proposed aptasensor displayed a linear response for acetamiprid in the range from 5×10(-14) M to 1×10(-5) M with an extremely low detection limit of 1.7×10(-14) M (S/N=3). In addition, this impedimetric aptasensor possessed great advantages including the simple operation process, low-cost, selectivity and sensitivity, which provided a promising model for the aptamer-based detection with a direct impedimetric method.

A facile label-free colorimetric aptasensor for acetamiprid based on the peroxidase-like activity of hemin-functionalized reduced graphene oxide

A facile aptasensor has been developed for the colorimetric detection of acetamiprid by using the hemin-functionalized reduced graphene oxide (hemin-rGO) composites. The as-prepared hemin-rGO composites possessed both the ability of rGO to physically adsorb the aptamers and the peroxidase-like activity of hemin that could catalyse 3,3,5,5-tetramethylbenzidine (TMB) in the presence of H2O2, to produce a solution with blue color. The well-dispersed hemin-rGO composites coagulated completely at the proper salt concentration; however, the coagulation of hemin-rGO was vanished when abundant aptamers were adsorbed on its surface because the attached negatively charged DNA backbone increased individual hemin-rGO electrostatic repulsion. In the detection scheme, acetamiprid with different concentrations was firstly incubated with the same amount of aptamer. The more acetamiprid in the tested solution, the less free aptamers were absorbed on the hemin-rGO surface, making the composites coagulate to a higher degree in the presence of the optimum NaCl concentration. As a consequence, the content of hemin-rGO in the supernatant was decreased after centrifugation, which catalysed oxidation of TMB in the presence of H2O2 to produce light blue color with a low absorbance. The color variation relavant to the acetamiprid concentration can be judged by the naked eyes and easily monitored by the inexpensive UV-vis spectrometer. Such designed aptasensor displayed a linear response for acetamiprid in the range from 100nM to 10μM with a detection limit of 40nM (S/N=3). This colorimetric aptasensing platform offers great advantages including the simple operation process, low-cost portable instrument, and user-friendly applications.

Pesticide residues in honeybees, honey and bee pollen by LC-MS/MS screening: reported death incidents in honeybees

The aim of this study was to investigate reported cases of honeybee death incidents with regard to the potential interrelation to the exposure to pesticides. Thus honeybee, bee pollen and honey samples from different areas of Greece were analyzed for the presence of pesticide residues. In this context an LC-ESI-MS/MS multiresidue method of total 115 analytes of different chemical classes such as neonicotinoids, organophosphates, triazoles, carbamates, dicarboximides and dinitroanilines in honeybee bodies, honey and bee pollen was developed and validated. The method presents good linearity over the ranges assayed with correlation coefficient values r(2)≥0.99, recoveries ranging for all matrices from 59 to 117% and precision (RSD%) values ranging from 4 to 27%. LOD and LOQ values ranged - for honeybees, honey and bee pollen - from 0.03 to 23.3 ng/g matrix weight and 0.1 up to 78 ng/g matrix weight, respectively. Therefore this method is sufficient to act as a monitoring tool for the determination of pesticide residues in cases of suspected honeybee poisoning incidents. From the analysis of the samples the presence of 14 active substances was observed in all matrices with concentrations ranging for honeybees from 0.3 to 81.5 ng/g, for bee pollen from 6.1 to 1273 ng/g and for honey one sample was positive to carbendazim at 1.6 ng/g. The latter confirmed the presence of such type of compounds in honeybee body and apicultural products.

Fast determination of thiacloprid by photoinduced chemiluminescence

A new and sensitive application of chemiluminescence detection has been developed for the determination of the pesticide thiacloprid in water. It was based on the on-line photoreaction of thiacloprid in a basic medium, with quinine acting as the sensitizer of the chemiluminescent response; cerium (IV) in sulfuric acid medium was used as the oxidant. High degrees of automation and reproducibility were achieved using a flow-injection analysis (FIA) manifold. The validation of the method was performed in terms of selectivity, linearity, limit of detection (LOD), precision, and accuracy. Liquid chromatography with ultraviolet (UV) detection was used as reference for mineral, tap, ground, and spring water samples. The proposed method is fast (with a throughput of 130 h(-1)), sensitive (LOD of 0.8 ng mL(-1) without preconcentration steps and of 0.08 ng mL(-1) with solid-phase extraction [SPE]), low cost, and possible to couple with separation methods for the simultaneous determination of other pesticides. The enhanced chemiluminescence intensity was linear with the thiacloprid concentration above the 2-80 and 80-800 ng mL(-1) ranges. A possible reaction mechanism is also discussed.

Sensitive analytical methods for 22 relevant insecticides of 3 chemical families in honey by GC-MS/MS and LC-MS/MS

Several methods for analyzing pesticides in honey have been developed. However, they do not always reach the sufficiently low limits of quantification (LOQ) needed to quantify pesticides toxic to honey bees at low doses. To properly evaluate the toxicity of pesticides, LOQ have to reach at least 1 ng/g. In this context, we developed extraction and analytical methods for the simultaneous detection of 22 relevant insecticides belonging to three chemical families (neonicotinoids, pyrethroids, and pyrazoles) in honey. The insecticides were extracted with the QuEChERS method that consists in an extraction and a purification with mixtures of salts adapted to the matrix and the substances to be extracted. Analyses were performed by gas chromatography coupled with tandem mass spectrometry (GC-MS/MS) for the pyrazoles and the pyrethroids and by high-performance liquid chromatography coupled with tandem mass spectrometry (HPLC-MS/MS) for the neonicotinoids and ethiprole. Calibration curves were built from various honey types fortified at different concentrations. Linear responses were obtained between 0.2 and 5 ng/g. Limits of detection (LOD) ranged between 0.07 and 0.2 ng/g, and LOQ ranged between 0.2 and 0.5 ng/g. The mean extraction yields ranged between 63 % and 139 % with RSD <25 %. A complete validation of the methods also examined recovery rates and specificity. These methods were applied to 90 honey samples collected during a 2009-2010 field study in two apiaries placed in different anthropic contexts.

Simultaneous determination of residues in pollen and high-fructose corn syrup from eight neonicotinoid insecticides by liquid chromatography-tandem mass spectrometry

The neonicotinoids have recently been identified as a potential contributing factor to the sudden decline in adult honeybee population, commonly known as colony collapse disorder (CCD). To protect the health of honeybees and other pollinators, a new, simple, and sensitive liquid chromatography-electrospray ionization mass spectrometry method was developed and validated for simultaneous determination of eight neonicotinoids, including acetamiprid, clothianidin, dinotefuran, flonicamid, imidacloprid, nitenpyram, thiacloprid, and thiamethoxam, in pollen and high-fructose corn syrup (HFCS). In this method, eight neonicotinoids, along with their isotope-labeled internal standards, were extracted from 2 g of pollen or 5 g of HFCS using an optimized quick, easy, cheap, effective, rugged, and safe extraction procedure. The method limits of detection in pollen and HFCS matrices were 0.03 ng/g for acetamiprid, clothianidin, dinotefuran, imidacloprid, thiacloprid, and thiamethoxam and ranged between 0.03 and 0.1 ng/g for nitenpyram and flonicamid. The precision and accuracy were well within the acceptable 20% range. Selectivity, linearity, lower limit of quantitation, matrix effect, recovery, and stability in autosampler were also evaluated during validation. This validated method has been used successfully in analyzing a set of pollen and HFCS samples collected for evaluating potential honeybee exposure to neonicotinoids.

Liquid chromatography with diode array detection and tandem mass spectrometry for the determination of neonicotinoid insecticides in honey samples using dispersive liquid-liquid microextraction

The combination of solid-phase extraction with dispersive liquid-liquid microextraction (SPE-DLLME) is proposed for the determination of five neonicotinoid insecticides in honey. After a cleanup stage, the analytes were eluted using acetonitrile. DLLME was performed by injecting rapidly the acetonitrile extract into 10 mL of water containing a 10% (w/v) NaCl and 100 μL of CHCl3. The settled organic phase obtained after centrifugation was evaporated, reconstituted in acetonitrile (ACN), and submitted to liquid chromatography (LC) with photodiode array detection (DAD) and atmospheric pressure chemical ionization-ion trap-tandem mass spectrometry (APCI-IT-MS/MS). The matrix effect was evaluated, and quantification was carried out using external aqueous calibrations when using DAD, the matrix-matched calibration method was applied for MS/MS. Detection limits in the 0.2-1.0 and 0.02-0.13 ng/g ranges were obtained when using DAD and MS/MS, respectively. The SPE-DLLME-LC-APCI-IT-MS/MS method was applied for the analysis of different honey samples, and none was found to contain residues.

UHPLC/MS-MS Analysis of Six Neonicotinoids in Honey by Modified QuEChERS: Method Development, Validation, and Uncertainty Measurement

Rapid and reliable multiresidue analytical methods were developed and validated for the determination of 6 neonicotinoids pesticides (acetamiprid, clothianidin, imidacloprid, nitenpyram, thiacloprid, and thiamethoxam) in honey. A modified QuEChERS method has allowed a very rapid and efficient single-step extraction, while the detection was performed by UHPLC/MS-MS. The recovery studies were carried out by spiking the samples at two concentration levels (10 and 40 μg/kg). The methods were subjected to a thorough validation procedure. The mean recovery was in the range of 75 to 114% with repeatability below 20%. The limits of detection were below 2.5 μg/kg, while the limits of quantification did not exceed 4.0 μg/kg. The total uncertainty was evaluated taking the main independent uncertainty sources under consideration. The expanded uncertainty did not exceed 49% for the 10 μg/kg concentration level and was in the range of 16–19% for the 40 μg/kg fortification level.