Ag and Au nanoparticles/reduced graphene oxide composite materials: Synthesis and application in diagnostics and therapeutics

Combining computational and experimental approaches: a novel pH-responsive PVA-stabilized MXene nanocarriers/doxorubicin delivery system with enhanced efficacy for targeted lung cancer therapeutics

While advancements have been made in cancer treatment, achieving effective localized therapy remains a significant challenge. Major obstacles include the inefficiency of drug delivery methods and the side effects linked to traditional chemotherapeutics. In this study, we present an innovative delivery system designed to transport doxorubicin (DOX) directly to the lungs. This system employs PVA-stabilized DOX-loaded MXene, aiming to improve targeted delivery and drug efficacy while minimizing toxicity. Our approach represents a promising advancement in the optimization of cancer therapeutics. Using in silico and computational methods, we evaluated the interactions between PVA, DOX, and MXene. Characterization techniques demonstrated that the synthesized PVA@Mxene/DOX exhibited favorable physicochemical properties. We assessed the anticancer potential of PVA@Mxene/DOX through the MTT assay, in vitro migration assay, and apoptosis assay. The findings revealed that the developed anticancer PVA@Mxene/DOX displayed a layered structure with controlled release kinetics. Notably, it significantly reduced cancer cell growth (P < 0.05), induced apoptosis in cancer cells, and inhibited their migration. These results suggest that PVA@Mxene/DOX holds promise as an effective anticancer agent to enhance lung cancer treatment and improve patient care.

In Situ Growth of Au NPs on Nitrogen-Doped Graphene Quantum Dots Decorated Graphene Composites for the Construction of an Electrochemical Immunosensor and Its Application in CEA Detection

Carcinoembryonic antigen (CEA) is an important tumor biomarker for the early clinical diagnosis of various cancers, and, therefore, the accurate and sensitive quantitative determination of CEA is of vital significance. In this study, we demonstrated the in situ growth of Au nanoparticles (AuNPs) on nitrogen-doped graphene quantum dots (N-GQDs) decorated reduced graphene oxide (rGO) nanocomposites by using simple drop-coating and electrochemical deposition methods. N-GQDs@rGO can be formed through the π-π stacking interaction and possesses a high specific surface area and many functional groups, providing lots of anchor sites (amino moieties in NGQDs) for the in situ electrochemical growth of AuNPs without the addition of reductants and protective agents. Such AuNPs/N-GQDs@rGO ternary nanocomposites combine the characteristics of three nanomaterials, showing a large surface area, excellent solubility, good conductivity, catalytic activity, a simple fabrication process, and notable stability, which are further used to construct a label-free electrochemical immunosensor for the determination of CEA. Under the optimized experimental conditions, the AuNPs/N-GQDs@rGO-based electrochemical immunosensor achieves a broad linear response, ranging from 1 pg/mL to 0.5 μg/mL and a low detection limit of 0.13 pg/mL. Moreover, the AuNPs/N-GQDs@rGO-based electrochemical immunosensor shows exceptional selectivity, anti-interference, and anti-fouling capabilities for the direct analysis of CEA amounts in fetal bovine serum samples, showing vast potential in the clinical screening of cancer.

Exploring the role of graphene-metal hybrid nanomaterials as Raman signal enhancers in early stage cancer detection

Molecular diagnosis plays a significant role in detection of biomolecules linked to early stage cancer since it offers greater sensitivity and reliability for identification of biomarker level changes as the disease progresses. The application of vibrational spectroscopy in biomarker detection is defined by the fingerprint spectrum of a molecule originating from single-molecule vibrations. This characteristic makes surface enhanced Raman spectroscopy (SERS) a promising tool for identification of biomarkers. The performance of the SERS technique largely depends on the material being used as the SERS substrate. Graphene, with its large surface area and abundance of aromatic regions, is considered advantageous as SERS substrate. Combining graphene with metal nanomaterials considerably increases SERS signal intensity, thereby enhancing detection sensitivity. Therefore, this review emphasizes the significance of selecting graphene-metal nanohybrids as suitable SERS substrates for signal amplification. The detail understanding of the mechanism of graphene-metal hybrid in SERS based detection of early stage cancer is also presented. Furthermore, several examples demonstrated the application of graphene-metal hybrid nanomaterials in detecting biomarkers and cancer cell differentiation using SERS imaging.

The impact of graphene oxide nanoparticles on the migratory behavior of metastatic human breast cancer cell, MDA-MB-231

Breast cancer (BC) with aggressive metastasis is a serious ongoing public health problem among women. Graphene oxide (GO) has an inhibitory effect on the migration rate and metastasis of BC cells, but its various aspects have not yet been explored. This paper aims to research into the effect of GO nanoparticles (GO-Np) on the migratory behavior of MDA-MB-231 as a metastatic human BC cell line. We synthesized GO-Np using a modified Hummer's method. Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), dynamic light scattering (DLS) and zeta potential analyses were conducted to characterize GO-Np. Cytotoxicity of GO-Np against MDA-MB-231 cell lines was examined by optical microscopy and DAPI staining. Migration of cancer cells was analyzed by scratch healing test. Finally, the impact of GO-Np on the expression of BC markers, including Thrombospondin1 (THBS1) and Fibronectin1 (FN1) was investigated by Immunocytochemistry assay (ICC). Results showed a dose-dependent cytotoxicity of GO-Np to MDA-MB-231 cells. The half-maximal inhibitory concentration (IC50) of GO-Np was about 40 μg/ml based on both DAPI test and optical microscopy. The scratch healing test at IC50 concentration of GO-Np, showed a significant decrease (24.4%) in the migration percentage of cells compared to untreated cells. The ICC assay indicated that GO-Np can suppress the expression of both THBS1 and FN1, proving its anti-metastatic properties. In conclusion, GO-Np showed a promising anti-metastatic effect in MDA-MB-231 BC cells.

Au@Ag hollow nanoshells-based SERS integrated microfluidic chip as a sample-to-answer platform for the ultra-sensitive detection of geosmin

BACKGROUND

Geosmin (GSM) can compromise the immune systems of aquatic organisms, rendering them more vulnerable to viral and bacterial infections, thereby adversely affecting their growth, reproduction, yield, and quality. Given the relatively low odor thresholds of GSM, there is a critical demand for the development of a highly sensitive and rapid detection method. According to the principle of Surface-enhanced Raman spectroscopy (SERS), localized surface plasmon resonance (LSPR) greatly enhances the Raman signals of adsorbed molecules. To date, no study has reported the application of SERS to detect GSM.

RESULTS

Dual-metal nanomaterials with hollow structures have been proven to provide a large surface area and heightened localized surface plasmon resonance, thereby enhancing the sensitivity of Raman signals. In this study, a sample-to-answer platform was constructed by integrating Au@Ag hollow nanoshells (HNSs)-based SERS and a microfluidic chip for the sensitive, fast, and direct determination of GSM. Under 532 nm excitation, GSM exhibit Raman peaks on the SERS-active Au@Ag HNSs, and there is a relationship between the peak intensity and the concentration of GSM. Owing to the integration of the microfluidic chip, only microliters of reagent are required, and the test results can be achieved within 4 min. The constructed sample-to-answer platform showed a good linear response to GSM in the range of 1 ng/L-1 mg/L, with a detection limit of 0.16 ng/L. An optimal calibration model is established by combining stoichiometric algorithms.

SIGNIFICANCE

This work realized the ultra-highly sensitive and fast determination of GSM based on SERS-active Au@Ag HNSs, which provides new insights and is very promising for the on-site monitoring of earthy odors. Our study makes a significant contribution to the literature because the developed SERS-based detection method does not require labels or biomaterials, providing the possibility of highly sensitive and on-site testing of contaminants in food and the environment.

Graphene-based metal/metal oxide nanocomposites as potential antibacterial agents: a mini-review

Antimicrobial resistance (AMR) is a rising issue worldwide, which is increasing prolonged illness and mortality rates in the population. Similarly, bacteria have generated multidrug resistance (MDR) by developing various mechanisms to cope with existing antibiotics and therefore, there is a need to develop new antibacterial and antimicrobial agents. Biocompatible nanomaterials like graphene and its derivatives, graphene oxide (GO), and reduced graphene oxide (rGO) loaded with metal/metal oxide nanoparticles have been explored as potential antibacterial agents. It is observed that nanocomposites of GO/rGO and metal/metal oxide nanoparticles can result in the synthesis of less toxic, more stable, controlled size, uniformly distributed, and cost-effective nanomaterials compared to pure metal nanoparticles. Antibacterial studies of these nanocomposites show their considerable potential as antibacterial and antimicrobial agents, however, issues like the mechanism of antimicrobial action and their cytotoxicity need to be explored in detail. This review highlights a comparative analysis of graphene-based metal and metal oxide nanoparticles as potential antibacterial agents against AMR and MDR.

Promoting Diabetic Wound Healing through a Hydrogel-Based Cascade Regulation Strategy of Fibroblast-Macrophage

The management of diabetic wounds (DWs) continues to pose a significant challenge in the field of medicine. DWs are primarily prevented from healing due to damage to macrophage efferocytosis and fibroblast dysfunction. Consequently, a treatment strategy that involves both immunoregulation and the promotion of extracellular matrix (ECM) formation holds promise for healing DWs. Nevertheless, existing treatment methods necessitate complex interventions and are associated with increased costs, for example, the use of cytokines and cell therapy, both of which have limited effectiveness. In this study, a new type of ruthenium (IV) oxide nanoparticles (RNPs)-laden hybrid hydrogel dressing with a double network of Pluronic F127 and F68 has been developed. Notably, the hybrid hydrogel demonstrates remarkable thermosensitivity, injectability, immunoregulatory characteristics, and healing capability. RNPs in hydrogel effectively regulate both fibroblasts and macrophages in a cascade manner, stimulating fibroblast differentiation while synergistically enhancing the efferocytosis of macrophage. The immunoregulatory character of the hydrogel aids in restoring the intrinsic stability of the immune microenvironment in the wound and facilitates essential remodeling of the ECM. This hydrogel therefore offers a novel approach for treating DWs through intercellular communication.

Determination of Photothermal and EMI Shielding Efficiency of Graphene-Silver Nanoparticle Composites Prepared under Low-Dose Gamma Irradiation

Silver nanoparticles (Ag NPs) have been produced by low-dose (1-20 kGy) gamma irradiation of silver nitrate in the presence of graphene-based material (graphene oxide or electrochemically exfoliated graphene). The large surface area of those graphene-based materials combined with the presence of oxygen-containing functional groups on the surface provided successful nucleation and growth of Ag nanoparticles, which resulted in a uniformly covered graphene surface. The obtained Ag nanoparticles were spherical with a predominant size distribution of 10-50 nm for graphene oxide and 10-100 nm for electrochemically exfoliated graphene. The photothermal efficiency measurement showed a temperature increase upon exposure to a 532 nm laser for all samples and the highest photothermal efficiency was measured for the graphene oxide/Ag NP sample prepared at 5 kGy. Electromagnetic interference (EMI) shielding efficiency measurements showed poor shielding for the composites prepared with graphene oxide. On the other hand, all composites prepared with electrochemically exfoliated graphene showed EMI shielding to some extent, and the best performance was measured for the samples prepared at 5 and 20 kGy doses.

Nanoparticles for efficient drug delivery and drug resistance in glioma: New perspectives

Gliomas are the most common primary tumors of the central nervous system, with glioblastoma multiforme (GBM) having the highest incidence, and their therapeutic efficacy depends primarily on the extent of surgical resection and the efficacy of postoperative chemotherapy. The role of the intracranial blood-brain barrier and the occurrence of the drug-resistant gene O6-methylguanine-DNA methyltransferase have greatly limited the efficacy of chemotherapeutic agents in patients with GBM and made it difficult to achieve the expected clinical response. In recent years, the rapid development of nanotechnology has brought new hope for the treatment of tumors. Nanoparticles (NPs) have shown great potential in tumor therapy due to their unique properties such as light, heat, electromagnetic effects, and passive targeting. Furthermore, NPs can effectively load chemotherapeutic drugs, significantly reduce the side effects of chemotherapeutic drugs, and improve chemotherapeutic efficacy, showing great potential in the chemotherapy of glioma. In this article, we reviewed the mechanisms of glioma drug resistance, the physicochemical properties of NPs, and recent advances in NPs in glioma chemotherapy resistance. We aimed to provide new perspectives on the clinical treatment of glioma.

Changing Cinnamaldehyde Skeleton Achieves Antibacterial Nanoswitch

Changeable substituent groups of organic molecules can provide an opportunity to clarify the antibacterial mechanism of organic molecules by tuning the electron cloud density of their skeleton. However, understanding the antibacterial mechanism of organic molecules is challenging. Herein, we reported a molecular view strategy for clarifying the antibacterial switch mechanism by tuning electron cloud density of cinnamaldehyde molecule skeleton. The cinnamaldehyde and its derivatives were self-assembled into nanosheets with excellent water solubility, respectively. The experimental results show that α-bromocinnamaldehyde (BCA) nanosheets exhibits unprecedented antibacterial activity, but there is no antibacterial activity for α-methylcinnamaldehyde nanosheets. Therefore, the BCA nanosheets and α-methylcinnamaldehyde nanosheets achieve an antibacterial switch. Theoretical calculations further confirmed that the electron-withdrawing substituent of the bromine atom leads to a lower electron cloud density of the aldehyde group than that of the electron-donor substituent of the methyl group at the α-position of the cinnamaldehyde skeleton, which is a key point in elucidating the antimicrobial switch mechanism. The excellent biocompatibility of BCA nanosheets was confirmed by CCK-8. The mouse wound infection model, H&E staining, and the crawling ability of drosophila larvae show that as-prepared BCA nanosheets are safe and promising for wound healing. This study provides a new strategy for the synthesis of low-cost organic nanomaterials with good biocompatibility. It is expected to expand the application of natural organic small molecule materials in antimicrobial agents.

Nanotechnology's frontier in combatting infectious and inflammatory diseases: prevention and treatment

Inflammation-associated diseases encompass a range of infectious diseases and non-infectious inflammatory diseases, which continuously pose one of the most serious threats to human health, attributed to factors such as the emergence of new pathogens, increasing drug resistance, changes in living environments and lifestyles, and the aging population. Despite rapid advancements in mechanistic research and drug development for these diseases, current treatments often have limited efficacy and notable side effects, necessitating the development of more effective and targeted anti-inflammatory therapies. In recent years, the rapid development of nanotechnology has provided crucial technological support for the prevention, treatment, and detection of inflammation-associated diseases. Various types of nanoparticles (NPs) play significant roles, serving as vaccine vehicles to enhance immunogenicity and as drug carriers to improve targeting and bioavailability. NPs can also directly combat pathogens and inflammation. In addition, nanotechnology has facilitated the development of biosensors for pathogen detection and imaging techniques for inflammatory diseases. This review categorizes and characterizes different types of NPs, summarizes their applications in the prevention, treatment, and detection of infectious and inflammatory diseases. It also discusses the challenges associated with clinical translation in this field and explores the latest developments and prospects. In conclusion, nanotechnology opens up new possibilities for the comprehensive management of infectious and inflammatory diseases.

Biological Synthesis, Characterization, and Therapeutic Potential of S. commune-Mediated Gold Nanoparticles

Green-synthesized gold nanoparticles demonstrate several therapeutic benefits due to their safety, non-toxicity, accessibility, and ecological acceptance. In our study, gold nanoparticles (AuNPs) were created using an extracellular extract from the fungus Schizophyllum commune (S. commune). The reaction color was observed to be a reddish pink after a 24 h reaction, demonstrating the synthesis of the nanoparticles. The myco-produced nanoparticles were investigated using transmission electron microscopy (TEM), dynamic light scattering (DLS), and UV-visible spectroscopy. The TEM pictures depicted sphere-like shapes with sizes ranging from 60 and 120 nm, with an average diameter of 90 nm, which is in agreement with the DLS results. Furthermore, the efficiency of the AuNPs' antifungal and cytotoxic properties, as well as their production of intracellular ROS, was evaluated. Our findings showed that the AuNPs have strong antifungal effects against Trichoderma sp. and Aspergillus flavus at increasing doses. Additionally, the AuNPs established a dose-dependent activity against human alveolar basal epithelial cells with adenocarcinoma (A549), demonstrating the potency of synthesized AuNPs as a cytotoxic agent. After 4 h of incubation with AuNPs, a significant increase in intracellular ROS was observed in cancer cells. Therefore, these metallic AuNPs produced by fungus (S. commune) can be used as an effective antifungal, anticancer, and non-toxic immunomodulatory delivery agent.

A MXene@AgAu@PDA nanoplatform loaded with AgAu nanocages for enhancing catalytic activity and antibacterial performance

With the rapid development of social industrialization, environmental problems seriously threaten people's health, especially water pollution. Therefore, there is an urgent need to construct a multifunctional nanoplatform for different scenarios. Two-dimensional MXene@AgAu@PDA nanosheets loaded with AgAu bimetallic nanocages have been prepared by a one-step method. First, the in situ generated MXene@Ag is used as an auxiliary template, and then HAuCl4 and dopamine are added for in situ redox-oxidizing polymerization reactions to obtain AgAu catalytic nanocages and the protective polydopamine (PDA) layer which can improve the stability and biocompatibility. MXene and PDA have excellent photothermal conversion ability while hollow AgAu nanocages have strong absorption in the near-infrared region and a local surface plasmonic resonance effect. In comparison to the catalytic reaction rates under dark and room temperature conditions, the catalytic kinetic rate of MXene@AgAu@PDA nanosheets under near-infrared irradiation increases from 0.13 to 0.69 min-1 mg-1. Density functional theory (DFT) is used to study the electron transfer behavior between AgAu nanocages and MXene nanosheets, and the mechanism of the enhanced catalytic reaction rate is analyzed. Besides, due to its Ag ions and photothermal coupling antibacterial properties, 40 μg mL-1 MXene@AgAu@PDA nanosheets inactivates nearly all E. coli and S. aureus after irradiation with near-infrared light for 6 min.

Synthesis of copper-reduced graphene oxide nanomaterials using glucose and study of its antibacterial and anticancer activities

In this work, glucose-capped copper nanoparticles decorated reduced graphene oxide nanomaterial are synthesized at 100 °C and 200 °C via chemical reduction method and studied for their antibacterial and anticancer activities. Synthesized nanomaterials were characterized using x-ray diffraction, Fourier-transform infrared, transmission electron microscope, and RAMAN. It is observed in transmission electron microscopy and selected area electron diffraction studies that copper nanoparticles deposited onto reduced graphene oxide are smaller than nanoparticles generated in the absence of reduced graphene oxide. Also, the size of copper nanoparticles synthesized at 200 °C is smaller than at 100 °C. Results suggest that Cu/Glu/rGO synthesized at both temperatures showed significant antibacterial activity againstEscherichia coliandBacillus anthracis,similarly, showed significant cell death in cancer cell lines [Cal33 and HCT-116 p53 (+/+)]. Interestingly, the nanomaterials were seen to be more effective against the cancer cell lines harboring aggregating mutant p53. Tumors with aggregating mutants of p53 are difficult to treat hence, Cu/Glu/rGO can be promising therapeutic agents against these difficult cancers. However, the antibacterial and anticancer activity of Cu/Glu/rGO synthesized at 100 °C where Cu2O form is obtained was found to be more effective compared to Cu/Glu/rGO synthesized at 200 °C where Cu form is obtained. Though fine-tuning of the material may be required for its commercial applications.

Current Trends on the Effects of Metal-Based Nanoparticles on Microbial Ecology

The growing field of nanotechnology and its many applications have led to the irregular release of nanoparticles (NPs), with unintended effects on the environment and continued contamination of water bodies. Metallic NPs are used more frequently in extreme environmental conditions due to their higher efficiency, which attracts more attention in various applications. Due to improper pre-treatment of biosolids, inefficient wastewater treatment practices, and other unregulated agricultural practices continue to contaminate the environment. In particular, the uncontrolled use of NPs in various industrial applications has led to damage to the microbial flora and caused irreplaceable damage to animals and plants. This study focuses on the effect of different doses, types, and compositions of NP on the ecosystem. The review also mentions the impact of various metallic NPs on microbial ecology, their interactions with microorganisms, ecotoxicity studies, and dosage evaluation of the NPs, mainly focused on the review article. However, further research is still needed to understand the complexity of interactions between NPs and microbes in soil and aquatic ecosystems.

Polyethylene glycol modified graphene oxide-silver nanoparticles nanocomposite as a novel antibacterial material with high stability and activity

Inorganic antibacterial nanomaterials play an increasingly important role in addressing the growing threat of drug-resistant bacteria. Graphene oxide-silver nanoparticles composite (GO-AgNPs), as a kind of inorganic nanomaterials, have excellent antibacterial properties, showing promising potential in biomedical field. However, GO-AgNPs are terribly prone to sedimentation due to aggregation in physiological solutions, along with its non-environmental issues during the synthesis process, seriously limits the antibacterial application of GO-AgNPs in the biomedical field. To solve this problem, herein, polyethylene glycol-graphene oxide-silver nanoparticles composite (GO-AgNPs-PEG) were prepared by modifying GO-AgNPs with polyethylene glycol to enhance their dispersion stability in physiological solutions. In addition, GO-AgNPs-PEG were prepared with using the natural product gallic acid as a reductant and stabilizer, exhibiting the characteristic of environmentally friendly. Meanwhile, the dispersion stability and antibacterial activity of GO-AgNPs-PEG were characterized by various technical methods, it was found that GO-AgNPs-PEG can be stably dispersed in a variety of physiological solutions (e.g., physiological saline, phosphate buffer solution, Luria-Bertani medium, Murashige and Skoog medium) for more than one week. Moreover, the antibacterial properties of GO-AgNPs-PEG in physiological solutions were significantly better than those of GO-AgNPs. Furthermore, it was discovered that the antibacterial mechanism of GO-AgNPs-PEG was probably associated to destroying the integrity of bacterial cell walls and membranes. The findings in this work can provide new ideas and references for the development of new inorganic antibacterial nanomaterials with stable dispersion in physiological solutions.

Wearable Temperature Sensors Based on Reduced Graphene Oxide Films

With the development of medical technology and increasing demands of healthcare monitoring, wearable temperature sensors have gained widespread attention because of their portability, flexibility, and capability of conducting real-time and continuous signal detection. To achieve excellent thermal sensitivity, high linearity, and a fast response time, the materials of sensors should be chosen carefully. Thus, reduced graphene oxide (rGO) has become one of the most popular materials for temperature sensors due to its exceptional thermal conductivity and sensitive resistance changes in response to different temperatures. Moreover, by using the corresponding preparation methods, rGO can be easily combined with various substrates, which has led to it being extensively applied in the wearable field. This paper reviews the state-of-the-art advances in wearable temperature sensors based on rGO films and summarizes their sensing mechanisms, structure designs, functional material additions, manufacturing processes, and performances. Finally, the possible challenges and prospects of rGO-based wearable temperature sensors are briefly discussed.

Synthesis of Au-Ag bimetallic nanoparticles using Korean red ginseng (Panax ginseng Meyer) root extract for chemo-photothermal anticancer therapy

Green synthesis strategies have been widely applied for the preparation of versatile nanomaterials. Gold nanospheres with an average size of 6.95 ± 2.25 nm were green synthesized by using a 70% ethanol extract of Korean red ginseng (Panax ginseng Meyer) root as a reducing agent. A seed-mediated synthesis was conducted to prepare Au-Ag bimetallic nanoparticles using gold nanospheres as seeds. Remarkably, Au-Ag bimetallic nanoparticles with an average size of 80.4 ± 11.9 nm were synthesized. Scanning transmission electron microscopy, energy dispersive X-ray spectroscopy and elemental mappings revealed bimetallic nanoparticles with Au-Ag alloy core and Au-rich shells. A face-centered cubic structure of Au-Ag bimetallic nanoparticles was confirmed by X-ray diffraction analysis. For Au-Ag bimetallic nanoparticles, the ratio of Ag/Au was 0.20 which was detected and analyzed by inductively coupled plasma-mass spectrometry. Gold nanospheres and Au-Ag bimetallic nanoparticles were functionalized by PEGylation, folic acid conjugation and grafting onto graphene oxide. Finally, docetaxel was loaded for evaluating the in vitro cell viability on cancer cells. Successful functionalization was confirmed by Fourier-transform infrared spectra. The anticancer activity of the docetaxel-loaded nanoparticles was higher than that of their non-docetaxel-loaded counterparts. The highest anticancer activity on human gastric adenocarcinoma cells (AGS) was observed in the docetaxel-loaded gold nanospheres that were functionalized by PEGylation, folic acid conjugation and grafting onto graphene oxide. Additionally, grafting onto graphene oxide and docetaxel loading induced high intracellular reactive oxygen species generation. For chemo-photothermal (PTT) anticancer therapy, cell viability was investigated using near-infrared laser irradiation at 808 nm. The highest chemo-PTT anticancer activity on AGS cells was observed in the docetaxel-loaded Au-Ag bimetallic nanoparticles. Therefore, the newly prepared docetaxel-loaded Au-Ag bimetallic nanoparticles in the current report have potential applications in chemo-PTT anticancer therapy.

Synthesis and characterization of Au-decorated graphene oxide nanocomposite for magneto-electrochemical detection of SARS-CoV-2 nucleocapsid gene

Fast and effective diagnosis is the first step in monitoring the current coronavirus 2 (CoV-2) pandemic. Herein, we establish a simple and sensitive electrochemical assay using magnetic nanocomposite and DNA sandwich probes to rapidly quantify the CoV-2 nucleocapsid (N) gene down to the 0.37 fM level. This assay uses a pair of specific DNA probes. The capture probe is covalently conjugated to Au-decorated magnetic reduced graphene oxide (AMrGO) nanocomposite for efficiently capturing target RNA. In contrast, the detection probe is linked to peroxidase for signal amplification. The probes target the COV-2 gene, allowing for specific magnetic separation, enzymatic signal amplification, and subsequent generation of voltammetric current with a total assay time of 45 min. The developed biosensor has high selectivity and can discriminate non-specific gene sequences. Synthetic COV-2 N-gene can be detected efficiently in serum and saliva, while 1-bp mismatch gene yielded a low response. The performance of the genosensor was good in an extensive linear range of 5 aM-50 pM. For synthetic N-gene, we achieved the detection limit of 0.37, 0.33, and 0.19 fM in human saliva, urine, and serum. This simple, selective, and sensitive genosensor could have various genetics-based biosensing and diagnostic applications.

Biomass-assisted fabrication of rGO-AuNPs as surface-enhanced Raman scattering substrates for in-situ monitoring methylene blue degradation

Reduced graphene oxide-gold nanoparticles nanocomposites (rGO-AuNPs) with high surface-enhanced Raman scattering (SERS) activity was created by biomass-assisted green synthesis with Lilium casa blanca petals biomass for the first time, and its application for methylene blue (MB) degradation was explored through in-situ monitoring. Lilium casa blanca petals biomass was used as a reducing agent to reduce GO and chloroauric acid successively when carrying out rGO-AuNPs in-situ synthesis while it also acted as a capping agent. The produced rGO had oxygen-containing functional groups which had an outstanding performance in enhancing the SERS effect. Characterization results confirmed that the AuNPs were grafted onto the rGO sheet, and the mechanism study showed that total flavonoids in Lilium casa blanca petals biomass were the main biological compounds involved in the reduction. rGO-AuNPs had a high Raman enhancement factor (EF) which could reach 3.88 × 10⁷. The synthesized nanocomposite also had a good catalytic activity that could be employed as catalyst in MB degradation, and it could complete degradation within 15min. The reaction rate increased linearly with the amount of rGO-AuNPs, and the degradation could be in-situ monitored both by UV and SERS.

Challenges and opportunities for SERS in the infrared: materials and methods

In the wake of a global, heightened interest towards biomarker and disease detection prompted by the SARS-CoV-2 pandemic, surface enhanced Raman spectroscopy (SERS) positions itself again at the forefront of biosensing innovation. But is it ready to move from the laboratory to the clinic? This review presents the challenges associated with the application of SERS to the biomedical field, and thus, to the use of excitation sources in the near infrared, where biological windows allow for cell and through-tissue measurements. Two main tackling strategies will be discussed: (1) acting on the design of the enhancing substrate, which includes manipulation of nanoparticle shape, material, and supramolecular architecture, and (2) acting on the spectral collection set-up. A final perspective highlights the upcoming scientific and technological bets that need to be won in order for SERS to stably transition from benchtop to bedside.

Green synthesis of reduced graphene oxide/chitosan/gold nanoparticles composites and their catalytic activity for reduction of 4-nitrophenol

Gold nanoparticles (AuNPs) have attracted extensive attention in the past few years due to their unique properties and great potential application in catalysis. However, the application of AuNPs remains a significant challenge due to the lack of high efficiency and stability caused by aggregation. Immobilization of AuNPs on appropriate support shows promising results in avoiding aggregation and improving catalytic activity. In this work, reduced graphene oxide/chitosan/gold nanoparticles (rGO/CHS/AuNPs) composites were prepared using chitosan with different molecular weights (MW) as a reducing agent and stabilizer, and characterized by FT-IR, XRD, XPS, SEM, FESEM, EDS, TEM, HRTEM, and TGA. The preparation conditions of rGO/CHS/AuNPs composites, including chitosan MW, CHS/GO mass ratio, reaction temperature and time, and HAuCl₄ concentration were investigated in detail. The results indicated that reduction activity of chitosan for GO increased with the decrease of chitosan MW. The C/O ratio of rGO reduced by low molecular weight chitosan (LMWC) with viscosity-average molecular weight (Mv) of 21 kDa was 6.34. Small spherical AuNPs were uniformly immobilized on the rGO surface. The particle size of AuNPs increased from 9.29 to 13.03 nm as chitosan MW decreased from 465 to 21 kDa. The rGO/CHS/AuNPs showed good catalytic activity for the reduction of 4-NP in the presence of NaBH₄. The catalytic activity of rGO/CHS/AuNPs was closely related to chitosan MW. rGO/CHS/AuNPs synthesized by LMWC with Mv of 21 kDa showed the highest kinetic rate constant of 0.2067 min^-1. The results of this experimental study could be useful in the development of effective catalysts for the reduction of aromatic nitro compounds.

Noble Metals Functionalized on Graphene Oxide Obtained by Different Methods-New Catalytic Materials

In recent years, research has focused on developing materials exhibiting outstanding mechanical, electrical, thermal, catalytic, magnetic and optical properties such as graphene/polymer, graphene/metal nanoparticles and graphene/ceramic nanocomposites. Two-dimensional sp² hybridized graphene has become a material of choice in research due to the excellent properties it displays electrically, thermally, optically and mechanically. Noble nanomaterials also present special physical and chemical properties and, therefore, they provide model building blocks in modifying nanoscale structures for various applications, ranging from nanomedicine to catalysis and optics. The introduction of noble metal nanoparticles (NPs) (Au, Ag and Pd) into chemically derived graphene is important in opening new avenues for both materials in different fields where they can provide hybrid materials with exceptional performance due to the synergistical result of the specific properties of each of the materials. This review presents the different synthetic procedures for preparing Pt, Ag, Pd and Au NP/graphene oxide (GO) and reduced graphene oxide (rGO) composites.

Smart Biomimetic Nanozymes for Precise Molecular Imaging: Application and Challenges

New nanotechnologies for imaging molecules are widely being applied to visualize the expression of specific molecules (e.g., ions, biomarkers) for disease diagnosis. Among various nanoplatforms, nanozymes, which exhibit enzyme-like catalytic activities in vivo, have gained tremendously increasing attention in molecular imaging due to their unique properties such as diverse enzyme-mimicking activities, excellent biocompatibility, ease of surface tenability, and low cost. In addition, by integrating different nanoparticles with superparamagnetic, photoacoustic, fluorescence, and photothermal properties, the nanoenzymes are able to increase the imaging sensitivity and accuracy for better understanding the complexity and the biological process of disease. Moreover, these functions encourage the utilization of nanozymes as therapeutic agents to assist in treatment. In this review, we focus on the applications of nanozymes in molecular imaging and discuss the use of peroxidase (POD), oxidase (OXD), catalase (CAT), and superoxide dismutase (SOD) with different imaging modalities. Further, the applications of nanozymes for cancer treatment, bacterial infection, and inflammation image-guided therapy are discussed. Overall, this review aims to provide a complete reference for research in the interdisciplinary fields of nanotechnology and molecular imaging to promote the advancement and clinical translation of novel biomimetic nanozymes.

Salivary Glucose Detection with Laser Induced Graphene/AgNPs Non-Enzymatic Sensor

The tailoring of novel nanomaterials for sensitive glucose detection through a non-enzymatic mechanism is currently under intensive research. Here, we present a laser-induced graphene (LIG) electrode decorated with silver nanoparticles (AgNPs) as a catalytic element for the direct electrooxidation of glucose. The AgNPs were synthesized through cyclic voltammetry using LIG as a template, resulting in a porous tridimensional assembly with anchored nanostructures. The characterization corroborated the formation of LIG/AgNPs composite with distinctive peaks attributed to Ag₂O and AgO interaction with glucose. The proposed non-enzymatic sensors were successfully applied for non-enzymatic amperometric detection, exhibiting a linear range from 1 to 10 mM in the first peak (+0.7 V) and a narrow range from 1 to 2 mM with higher sensitivity of 52.2 mA/mM and improved LOD of 45 μM in the second peak (+0.55 V). The applicability of the LIG/AgNPs sensor was evaluated with spiked artificial saliva in a PoC format using a smartphone potentiostat, showing an average recovery rate of 91%. The analysis was performed in a portable, mobile, and low-cost fashion using a simulated non-invasive sample, with promising results in clinical ranges.

Electrochemical immunosensor for ultrasensitive detection of human papillomaviruse type 16 L1 protein based on Ag@AuNPs-GO/SPA

Human papillomaviruse type 16 (HPV16) is a high-risk serotype. As the main protective antigen protein, L1 protein is also the target protein for diagnosis. A simple label free electrochemical immunosensor (ECIS) was fabricated for ultrasensitive detection of HPV16 L1 protein in this work. Quasi-spherical Ag@Au core-shell nanoparticles on graphene oxide (Ag@AuNPs-GO) was developed as current response amplifier and characterized by UV-Vis Spectroscopy, Transmission Electron Microscopy and energy dispersive X-ray spectroscopy. Staphylococcal protein A was decorated on the modified electrode and utilized to immobilized the Fc portion of the monoclonal antibody specific for HPV16 L1 protein. Cyclic Voltammetry, Differential Pulse Voltammetry and Electrochemical Impedance Spectroscopy were used to verify the electrochemical performance and interfacial kinetic property. The increased concentration of HPV16 L1 protein led to slow electron transport and linearly decreased differential pulse voltammetry peak current with a detection limit of 0.002 ng mL^-1 and a wide linear relationship in the range of 0.005-400 ng mL^-1at a regression coefficient (R²) of 0.9948. Furthermore, this ECIS demonstrated acceptable accuracy with good reproducibility, stability and selectivity, suggesting a promising immunological strategy for HPV typing and early screening.

Efficiency of zero-dimensional and two-dimensional graphene architectural nanocomposites for organic transformations in the contemporary environment: a review

Graphene derivatives-based nanocatalyst finds increasing utilisation in the catalysis field for organic transformations. Researchers have been working on the development of graphene oxide, reduced graphene oxide, and graphene quantum dots with metal or metal oxide nanocomposites over the last few years. These materials exhibit excellent electrical, catalytic, optical, thermal, and magnetic properties. In particular, GO/rGO/GQDs composites assisted by metal or metal oxides have attracted broad attention for their possible applications in organic compound synthesis, drug delivery, sensors, devices, and the related areas of the environment. In this review, we have summarised GO/rGO/GQDs-metal or metal oxide composites using catalyst for organic conversions and synthesis of organic compounds in accordance with the discussion on the key problems and prospects for future study. Furthermore, there is a significant function for the catalytic efficiency of composites assisted by metal or metal oxide nanocatalyst which is categorised by graphene derivatives bases.

Three-Dimensional Reduced Graphene Oxide Hybrid Nano-Silver Scaffolds with High Antibacterial Properties

In recent years, hazardous wastewater treatment has been a complex and global problem. In this work, by considering the antimicrobial activity of Ag nanoparticles (AgNPs) and reduced graphene oxide (rGO), we constructed an antibacterial device (G-AgNP) with AgNPs conformably deposited onto a 3D scaffold of reduced graphene oxide in situ. The major limitation, which is difficult to recycle, of two-dimensional graphene-silver composite materials in previous studies is improved. Characterization techniques, SEM, TEM, XRD, and XPS, confirmed the synthesis of nanocomposites. Attributed to its larger specific area, more active sites, and synergistic enhancement, the G-AgNP device demonstrated the best bacterial removal capacity, with an antibacterial rate for both E. coli and S. aureus as high as 100% at quite low AgNP contents. The reported G-AgNP has potential application as a wearable sewage treatment device and for the protection of wearable sensors as a promising sterilizing candidate based on its high and stable antibacterial efficiency.

Advances in nanomaterial-based immunosensors for prostate cancer screening

Prostate cancer is one of the most common health hazards for men worldwide, specifically in Western countries. Rapid prostate cancer screening by analyzing the prostate-specific antigen present in male serum has brought about a sharp decline in the mortality index of this disease. Immunoassay technology quantifies the target analyte in the sample using the antigen-antibody reaction. Immunoassays are now pivotal in disease diagnostics, drug monitoring, and pharmacokinetics. Recently, immunosensors have gained momentum in delivering better results with high specificity and lower limit of detection (LOD). Nanomaterials like gold, silver, and copper exhibit numerous exceptional features and their use in developing immunosensors have garnered excellent results in the diagnostic field. This review highlights the recent and different immunoassay techniques used to detect prostate-specific antigens and discusses the advances in nanomaterial-based immunosensors to detect prostate cancer efficiently. The review also explores the importance of specific biomarkers and nanomaterials-based biosensors with good selectivity and sensitivity to prostate cancer.

A Multicomponent Polymer-Metal-Enzyme System as Electrochemical Biosensor for H2O2 Detection

Herein, an Au nanoparticles-polydopamine-poly acrylic acid-graphene (Au NPs-PDA-PAA-graphene) multicomponent nanohybrid is fabricated by surface functionalization of graphene alongside extensive in-situ growth of Au nanoparticles. The as-obtained nanocomposite possesses good hydrophilicity, excellent biocompatibility and high biomolecules loading capacity, which acts as an ideal platform for enzyme modification. Considering this fact, Horseradish peroxidase is expressively immobilized upon Au NPs-PDA-PAA-graphene surface, in order to lay the foundations of a biosensor that is majorly based on enzymatic activity. The biosensor exhibits higher sensitivity towards the determination of H2O2 with linearity ranging from 0.1 μm upto 20 mm, and the limit of detection going down to 0.02 μm. Encouraged by its acceptable electrocatalytic performance, this multicomponent system can also be easily employed for carrying out the real-time tracking of H2O2 coming out of Macrophage cells. Therefore, this work designs an extraordinarily updated platform for biosensing related applications, and also presents a reliable platform for the direct detection of H2O2in vivo and in vitro, which show great potential in bioelectroanalytical chemistry, cellular biology, and pathophysiology.

In Situ Green Synthesis of Graphene Oxide-Silver Nanoparticles Composite with Using Gallic Acid

The adoption of plant-derived natural products to synthesize metal nanoparticles and their complexes has the advantages of mild reaction conditions, environmental protection, sustainability and simple operation compared with traditional physical or chemical synthesis methods. Herein, silver nanoparticles (AgNPs) were in situ synthesized on the surface of graphene oxide (GO) by a “one-pot reaction” to prepare graphene oxide-silver nanoparticles composite (GO-AgNPs) based on using AgNO₃ as the precursor of AgNPs and gallic acid (GA) as the reducing agent and stabilizer. The size and morphology of GO-AgNPs were characterized by ultraviolet-visible spectrophotometer (Uv-vis), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscope (TEM), X-ray diffractometer (XRD) and dynamic light scattering (DLS). The effects of pH, temperature, time and material ratio on the synthesis of GO-AgNPs were investigated experimentally. The results showed that ideal GO-AgNPs could be prepared under the conditions of pH = 9, 45°C, 2 h and the 2:1 of molar ratio of AgNO₃ to GA. The AgNPs within GO-AgNPs are highly crystalline spherical particles with moderate density on the surface of GO, and the size of AgNPs is relatively uniform and determined to be about 8.19 ± 4.21 nm. The research results will provide new ideas and references for the green synthesis of metal nanoparticles and their complexes using plant-derived natural products as the reducing agent and stabilizer.

Photonics of Viburnum opulus L. Extracts in Microemulsions with Oxygen and Gold Nanoparticles

In this paper, the optical properties of viburnum extract flavonoids in the visible region of the spectrum were investigated and their use as a potential photosensitizer of singlet oxygen for photodynamic therapy was evaluated. The presence of long-lived excited states in the extract molecules was established by spectral methods and time-resolved spectroscopy methods and the dependences of the absorption capacity and luminescence intensity of the extract molecules on the concentrations of oxygen and ablative nanoparticles of the gold in the reverse micelles of AOT (sodium dioctyl sulfosuccinate) were established. The plasmonic enhancement of the luminescence of the extract molecules and the processes of their complexation with oxygen were also established. Furthermore, the rate constants of the processes of conversion of exciting energy in complexes were determined.

Gold dispersed hierarchical flower-like copper oxide microelectrodes for the sensitive detection of glucose and lactic acid in human serum and urine

Herein, we report self-supported gold dispersed copper oxide microflowers (Au@CuO MFs) on copper microelectrodes (CME) as a sensitive platform for the sensing of glucose and lactic acid in human serum...

Interfacial engineering in 3D/2D and 1D/2D bismuth ferrite (BiFeO3)/Graphene oxide nanocomposites for the enhanced photocatalytic activities under sunlight

3D-particulate and 1D-fiber structures of multiferroic bismuth ferrite (BiFeO₃/BFO) and their composites with 2D-graphene oxide (GO) have been developed to exploit the different scheme of interfacial engineering as 3D/2D and 1D/2D systems. Particulates and fibers of BFO were developed via sol-gel and electrospinning fabrication approaches respectively and their integration with GO was performed via the ultrasonic-assisted chemical reduction process. The crystalline and phase formation of BiFeO₃ and GO was confirmed from the XRD patterns obtained. The electron microscopic images revealed the characteristic integration of 3D particulates (with average size of 100 nm) and 1D fibers (with diameter of ~150 nm and few μm length) onto the 2D GO layers (thickness of ~27 nm). XPS analysis revealed that the BFO nanostructures have been integrated onto the GO through chemisorptions process, where it indicated that the ultrasonic process engineers the interface through the chemical modification of the surface of these 3D/2D and 1D/2D nanostructures. The photophysical studies such as the impedance and photocurrent measurements showed that the charge separation and recombination resistance is significantly enhanced in the system, which can directly be attributed to the effective interfacial engineering in the developed hetero-morphological composites. The degradation studies against a model pollutant Rhodamine B revealed that the developed nanocomposites exhibit superior photocatalytic activity via the effective generation of OH radicals as confirmed by the radical analysis studies (100% degradation in 150 and 90 min for 15% GO/BFO particulate and fiber composites, respectively). The developed system also demonstrated excellent photocatalytic recyclability, indicated their enhanced stability.

Highly Sensitive Electrochemical Aptasensor for Detection of Glypican-3 Using Hemin-Reduced Graphene Oxide-Platinum Nanoparticles Coupled with Conductive Reduced Graphene Oxide-Gold Nanoparticles

An electrochemical aptasensor for quantitatively detecting glypican-3 (GPC3) was constructed by combining hemin-reduced graphene oxide-platinum (H-rGO-Pt) nanoparticles (NPs) with reduced graphene oxide-gold (rGO-Au) nanoparticles (NPs). Herein, the rGO-Au NPs deposited onto screen-printed electrodes resulted in signal amplification due to their large surface areas. Meanwhile, highly conductive H-rGO-Pt NPs acted as a sensing medium that improved electrical conductivity and as an indicator for monitoring peak current for determination. A GPC3 aptamer (GPC3apt) with a low equilibrium dissociation constant was used as a bio-recognition molecule. GPC3apt specifically captured GPC3 proteins and formed aptamer-GPC3 complexes, which impeded electron transfer and thus hampered the redox signal of hemin in H-rGO-Pt NPs. This developed electrochemical aptasensor showed a linear response to GPC3 (from 0.001 μg/mL to 10 μg/mL) and had a detection limit of 0.001 μg/mL. This work provides a low-cost and highly sensitive detection with and good recovery for GPC3 and holds great promise for the clinical diagnosis of hepatocellular carcinoma.

Development of a new highly sensitive serotonin sensor based on green synthesized silver nanoparticle decorated reduced graphene oxide

Electrochemical detection of serotonin (5-hydroxytryptamine, 5-HT) is proposed for the first time using a cost-effective and eco-friendly nanocomposite of AgNPs and rGO which is synthesized through an in situ green reduction process using rosemary leaf extract. The synthesized nanocomposite and the elaborate thin layers have been characterized using UV-Vis, FTIR, TEM, and EIS. The sensitivity of the developed sensor was evaluated by differential pulse voltammetry. The peak current measured at a voltage of 420 mV (vs. Ag/AgCl) increased linearly in the 0.1 nM to 100 µM concentration range. A very low limit of detection of 78 pM compared to those in recent studies reported in the literature was obtained. The innovative approach was successfully applied to the determination of serotonin in spiked artificial urine samples.

Biofilm inhibition and bactericidal activity of NiTi alloy coated with graphene oxide/silver nanoparticles via electrophoretic deposition

Biofilm formation on medical devices can induce complications. Graphene oxide/silver nanoparticles (GO/AgNPs) coated nickel-titanium (NiTi) alloy has been successfully produced. Therefore, the aim of this study was to determine the anti-bacterial and anti-biofilm effects of a GO/AgNPs coated NiTi alloy prepared by Electrophoretic deposition (EPD). GO/AgNPs were coated on NiTi alloy using various coating times. The surface characteristics of the coated NiTi alloy substrates were investigated and its anti-biofilm and anti-bacterial effect on Streptococcus mutans biofilm were determined by measuring the biofilm mass and the number of viable cells using a crystal violet assay and colony counting assay, respectively. The results showed that although the surface roughness increased in a coating time-dependent manner, there was no positive correlation between the surface roughness and the total biofilm mass. However, increased GO/AgNPs deposition produced by the increased coating time significantly reduced the number of viable bacteria in the biofilm (p < 0.05). Therefore, the GO/AgNPs on NiTi alloy have an antibacterial effect on the S. mutans biofilm. However, the increased surface roughness does not influence total biofilm mass formation (p = 0.993). Modifying the NiTi alloy surface using GO/AgNPs can be a promising coating to reduce the consequences of biofilm formation.

Magnetic Nanoparticle Composites: Synergistic Effects and Applications

Composite materials are made from two or more constituent materials with distinct physical or chemical properties that, when combined, produce a material with characteristics which are at least to some degree different from its individual components. Nanocomposite materials are composed of different materials of which at least one has nanoscale dimensions. Common types of nanocomposites consist of a combination of two different elements, with a nanoparticle that is linked to, or surrounded by, another organic or inorganic material, for example in a core-shell or heterostructure configuration. A general family of nanoparticle composites concerns the coating of a nanoscale material by a polymer, SiO2 or carbon. Other materials, such as graphene or graphene oxide (GO), are used as supports forming composites when nanoscale materials are deposited onto them. In this Review we focus on magnetic nanocomposites, describing their synthetic methods, physical properties and applications. Several types of nanocomposites are presented, according to their composition, morphology or surface functionalization. Their applications are largely due to the synergistic effects that appear thanks to the co-existence of two different materials and to their interface, resulting in properties often better than those of their single-phase components. Applications discussed concern magnetically separable catalysts, water treatment, diagnostics-sensing and biomedicine.

Nonspherical Metal-Based Nanoarchitectures: Synthesis and Impact of Size, Shape, and Composition on Their Biological Activity

Metal-based nanoentities, apart from being indispensable research tools, have found extensive use in the industrial and biomedical arena. Because their biological impacts are governed by factors such as size, shape, and composition, such issues must be taken into account when these materials are incorporated into multi-component ensembles for clinical applications. The size and shape (rods, wires, sheets, tubes, and cages) of metallic nanostructures influence cell viability by virtue of their varied geometry and physicochemical interactions with mammalian cell membranes. The anisotropic properties of nonspherical metal-based nanoarchitectures render them exciting candidates for biomedical applications. Here, the size-, shape-, and composition-dependent properties of nonspherical metal-based nanoarchitectures are reviewed in the context of their potential applications in cancer diagnostics and therapeutics, as well as, in regenerative medicine. Strategies for the synthesis of nonspherical metal-based nanoarchitectures and their cytotoxicity and immunological profiles are also comprehensively appraised.

Current Strategies for Noble Metal Nanoparticle Synthesis

Noble metals have played an integral part in human history for centuries; however, their integration with recent advances in nanotechnology and material sciences have provided new research opportunities in both academia and industry, which has resulted in a new array of advanced applications, including medical ones. Noble metal nanoparticles (NMNPs) have been of great importance in the field of biomedicine over the past few decades due to their importance in personalized healthcare and diagnostics. In particular, platinum, gold and silver nanoparticles have achieved the most dominant spot in the list, thanks to a very diverse range of industrial applications, including biomedical ones such as antimicrobial and antiviral agents, diagnostics, drug carriers and imaging probes. In particular, their superior resistance to extreme conditions of corrosion and oxidation is highly appreciated. Notably, in the past two decades there has been a tremendous advancement in the development of new strategies of more cost-effective and robust NMNP synthesis methods that provide materials with highly tunable physicochemical, optical and thermal properties, and biochemical functionalities. As a result, new advanced hybrid NMNPs with polymer, graphene, carbon nanotubes, quantum dots and core-shell systems have been developed with even more enhanced physicochemical characteristics that has led to exceptional diagnostic and therapeutic applications. In this review, we aim to summarize current advances in the synthesis of NMNPs (Au, Ag and Pt).