pH responsive adsorption/desorption studies of organic dyes from their aqueous solutions by katira gum-cl-poly(acrylic acid-co-N-vinyl imidazole) hydrogel

Evaluation of neem gum-poly(acrylic acid) based adsorbent for cationic dye removal using adsorption isotherm, kinetics and thermodynamics: Linear regression models

Cationic dye pollution is detrimental to human health as it accumulates in the cytoplasm and poses toxic, mutagenic and carcinogenic effects. Many dye adsorbents report secondary waste generation, non-biodegradability, high costs and energy. Therefore, in this work, Neem gum (Ng) is utilised as a propitious candidate for water treatment due to its tuneable chemical structure, renewability, biodegradability, sustainability, non-toxicity and low cost. The Ng-g-p(AA)-cl-MBA hydrogel is synthesised via a free-radical polymerization technique to find its efficacy towards the adsorption of cationic dyes rhodamine B(RhB) and methylene blue(MB) and systematically characterized using FT-IR, TGA, XRD, BET and FE-SEM analysis. Various parameters were optimized for achieving the maximum adsorption efficiency including the initial concentration, pH, temperature, adsorbent dosage, and contact time. Adsorption Isotherm, Kinetics and Thermodynamics were studied to understand the adsorption behaviour of Ng-g-p(AA)-cl-MBA towards the dyes. The adsorption behaviour was best simulated by Langmuir's model with a maximum adsorption capacity (Qm) of 552.49 and 421.94 mg/g towards RhB and MB respectively, it obeyed a pseudo-second-order rate of adsorption and followed an exothermic and spontaneous process. It also depicted good regeneration and reusability features making it a promising candidate for dye effluent adsorption.

Advanced Bioresponsive Drug Delivery Systems for Promoting Diabetic Vascularized Bone Regeneration

The treatment of bone defects in diabetes mellitus (DM) patients remains a major challenge since the diabetic microenvironments significantly impede bone regeneration. Many abnormal factors including hyperglycemia, elevated oxidative stress, increased inflammation, imbalanced osteoimmune, and impaired vascular system in the diabetic microenvironment will result in a high rate of impaired, delayed, or even nonhealing events of bone tissue. Stimuli-responsive biomaterials that can respond to endogenous biochemical signals have emerged as effective therapeutic systems to treat diabetic bone defects via the combination of microenvironmental regulation and enhanced osteogenic capacity. Following the natural bone healing processes, coupling of angiogenesis and osteogenesis by advanced bioresponsive drug delivery systems has proved to be of significant approach for promoting bone repair in DM. In this Review, we have systematically summarized the mechanisms and therapeutic strategies of DM-induced impaired bone healing, outlined the bioresponsive design for drug delivery systems, and highlighted the vascularization strategies for promoting bone regeneration. Accordingly, we then overview the recent advances in developing bioresponsive drug delivery systems to facilitate diabetic vascularized bone regeneration by remodeling the microenvironment and modulating multiple regenerative cues. Furthermore, we discuss the development of adaptable drug delivery systems with unique features for guiding DM-associated bone regeneration in the future.

Eco-friendly property modulation of biobased gels of carboxymethyl cellulose-integrated poly(tertiary amine)s for the removal of azo-food dyes

Anionic polysaccharide-based gels enable the design of biobased materials with biochemical properties, non-toxic and natural origin. A new set of cationic gels was prepared from carboxymethylcellulose (CMC)-doped tertiary amino functional cationic monomers 2-(dimethylamino)ethyl methacrylate and N-(3-(dimethylamino)propyl) methacrylamide via the formation of semi-interpenetrated network (semi-IPN) at different polymerization temperatures, Tprep. A detailed understanding of the temperature-dependent synthesis and physicochemical response is required for the design of interpenetrating networks with CMC as an adsorbent that provides effective sources for the removal of azo-food dyes such as tartrazine and carmoisine from aqueous solutions. The variation of elasticity and swelling properties with respect to polymerization temperature was investigated. CMC-integration and polymerization temperature played a decisive role in the compressive elasticity. Incorporation of CMC into copolymer matrix led to a significant increase in elasticity of semi-IPNs, while mechanically weaker gels were obtained with increasing Tprep. Addition of CMC increased the swelling modulus of semi-IPNs formed at -18 °C by 2.6-fold. While the transparency changed depending on Tprep and microstructure, addition of CMC decreased the swelling rate of gels at all polymerization temperatures. The compressive modulus decreased with the swelling process in accordance with the Rubber elasticity theory. Semi-IPN gels showed stable swelling against pH-change in aqueous solutions and exhibited excellent pH-sensitivity significantly in low pH. A 4 to 12 fold decrease in maximum volume was observed by varying the pH between 2.1 and 9.8. The correlation between polymerization temperature and removal of azo-food dyes; tartrazine and carmoisine from contaminated wastewater with CMC-based gels was studied. Dynamic adsorption equilibrium was reached in 30 min, and tartrazine and carmoisine removal performances varied between 92.8 % and 98.4 %. respectively. The adsorption data for azo-dyes were evaluated by Langmuir, Freundlich, Temkin, Dubinin-Radushkevich, Redlich-Patterson, Sips, and Tooth isotherm models, but were best described by Langmuir and Redlich-Patterson models as they gave the highest correlation. Pseudo-first order, pseudo-second order, Elovich, Avrami kinetic and intra-particle diffusion models were investigated and dye adsorption was represented by pseudo-second-order model. After the adsorption process, semi-IPNs can easily be regenerated and effectively reused over five cycles. The study provided new insights towards the facile and sustainable synthesis of eco-friendly multifunctional CMC-based gels carrying tertiary amino groups for effective removal of azo-based food colorants.

Constructing of Core-Satellite Structure Bimetallic MOFs for Synergistic Enhanced Adsorption-Photocatalytic Degradation

Various industries generate a large amount of wastewater, which contains soluble organic compounds that can seriously jeopardize the environment and human health. Therefore, new photocatalytic materials with the function of efficiently degrading pollutants have become a research hotspot. In this research, bimetallic metal-organic frameworks (MOFs) with a core-satellite structure were prepared through a simple one-pot method in the presence of a polyvinylpyrrolidone structure-directing agent and crystal size. Also, the synergy of the adsorption-catalytic properties of the core-satellite structure bimetallic MOFs was achieved via the interaction of aluminum and iron groups. Meanwhile, the type I heterojunction structure based on MIL-53(Al@Fe)-OH realized the effective separation of the photogenerated carriers. Under the synergistic adsorption-catalytic degradation, the degradation efficiency of methylene blue (MB) was nearly 100% after adsorption (of 2 h) and photocatalysis (of 2 h), and the removal rate of MB still reached 90.43% after five cycles. This study provides a new strategy for the construction of bimetallic MOF structures for efficient adsorption-catalyzed degradation of environmental pollutants.

Facile preparation of interpenetrating network hydrogel adsorbent from starch- chitosan for effective removal of methylene blue in water

Hydrogels based on biopolymers have attracted considerable interest in the last decades. Herein, an interpenetrating network hydrogel (IPN-Gel) adsorbent from starch-chitosan was fabricated facilely in one-pot through tandem Schiff base reaction and photopolymerization. First, aldehyde starch (DAS) was synthesized by the reaction of soluble starch with sodium periodate. Afterward, acrylamide (AM), 2-acrylamido-2-methylpropanesulfonic acid (AMPS), polyethylene glycol dimethacrylate (PEGDMA), photoinitiator, chitosan and DAS were dissolved in water to obtain a clear solution. Schiff base reaction between chitosan and DAS took place quickly to form the first network, and then photopolymerization of AM, AMPS, and PEGDMA occurred under ultraviolet radiation to form the second network. The preparation conditions of the as-prepared IPN-Gel were optimized with two indexes of gel mass fraction and swelling ratio. Its swelling behavior with pH and temperature change was explored. Finally, its adsorption performance was characterized with methylene blue (MB) as a model contaminant. The maximum adsorption capacity of IPN-Gel can reach 2039 mg·g-1 at pH =10. Its adsorption performance accords with Langmuir isothermal model and pseudo-second-order kinetic model and it was mainly controlled by chemisorption. This strategy is expected to found broad application prospects in the preparation of hydrogel adsorbents.

Gels for Water Remediation: Current Research and Perspectives

The development of cost-effective and high-performance technologies for wastewater treatment is essential for achieving a sustainable economy. Among the various methods available for water remediation, adsorption is widely recognized as an effective and straightforward approach for removing a range of pollutants. Gel materials, particularly hydrogels and aerogels, have attracted significant research interest due to their unique properties. Hydrogels, for instance, are noted for their ability to be regenerated and reused, ease of separation and handling, and suitability for large-scale applications. Additionally, their low cost, high water absorption capacity, and contribution to environmental protection are important advantages. Aerogels, on the other hand, are distinguished by their low thermal conductivity, transparency, flexibility, high porosity, mechanical strength, light weight, large surface area, and ultralow dielectric constant. This review provides a comprehensive analysis of the current literature, highlighting gaps in knowledge regarding the classification, preparation, characterization, and key properties of these materials. The potential application of hydrogels and aerogels in water remediation, particularly in removing contaminants such as dyes, heavy metals, and various organic and inorganic pollutants, is also discussed.

Fabrication of porous adsorbents from eco-friendly aqueous foam for high-efficient removal of cationic dyes and sustainable utilization assessment

Porous materials applied in environmental remediation have received researchers' extensive attention recently, but the related green and convenient preparation method is rarely reported. Here, we recommended a green and convenient strategy for the fabrication of porous material via aqueous foam templates, which was synergistically stabilized by Codonopsis pilosula (CP) and clay minerals of attapulgite (APT). The characterization results revealed that the APT was modified by organic molecules leached from CP and anchored at the air-water interface, which improved the foam stability significantly. The novel porous material of polyacrylamide/Codonopsis pilosula/attapulgite (PAM/CP/APT) templated from the aqueous foam via a polymerization reaction had excellent adsorption capacity for the cationic dyes methyl violet (MV) and methylene blue (MB), and the adsorption capacity can reach 755.85 mg/g and 557.64 mg/g, respectively. More importantly, the adsorption capacity of spent adsorbent material was still over 200 mg/g after being recycled five times through a simple carbonization process, and then it was added to the plant pot, the total biomass was increased by about 86.42%. This study provided a green and sustainable pathway for the preparation, application and subsequent processing of porous materials.

Synthesis and characterization of polysiphonia/cerium oxide/nickel oxide nanocomposites for the removal of toxins from contaminated water and antibacterial potential

Due to massive industrial development, organic and inorganic wastes are very common in most industrial effluents from the pharmaceutical industry. Even in low concentrations, they are very dangerous and harmful to humans and other living organisms. Antibiotics are frequently detected in surface waters, in soil, in wastewater from sewage treatment plants, and even in drinking water. The major environmental threat they pose has prompted to search for effective and environmentally friendly means of eliminating these toxins. The biogenic synthesis of nanomaterials using natural herbal extracts has attracted considerable attention due to their low-cost, environmentally friendly and non-toxic nature, and as a reversal of various physical and chemical processes. The ceria nanoparticles (CeO2 NPs), nickel oxide nanoparticles (NiO NPs), and CeO2/NiO nanocomposites (CeO2/NiO NCS) were successfully prepared by simple biosynthetic routes using Polysiphonia urceolata algae extract as green surfactants and tested for toxic ofloxacin removal efficiency. The formed nanostructures were identified and characterized by various microscopic (FESEM-EDX, TEM, XRD, BET, and XPS) and spectroscopic (UV-Vis, FTIR, and TGA) methods. The adsorption/desorption of ofloxacin (OFX) on the surface of the nanomaterials was investigated under optimized conditions (initial dose 20 mg/L, agitation speed 250 rpm, pH 12, adsorbent dose 0.5 mg/L, and contact time 120 min). The removal efficiencies were 78%, 86%, and 94% for CeO2 NPs, NiO NPs and CeO2/NiO NCS, respectively, where OFX removal was found to be spontaneous, followed by Freundlich isotherm and pseudo-second order kinetic reaction model. The OFX adsorption mechanism on the nanomaterials involved the surface complexation via specific electrostatic attraction and H-bonding. The biogenic nanomaterials were also tested for their antibacterial activity against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus epidermidis and Staphylococcus aureus. The CeO2/NiO NCS exhibited the highest antibacterial activity with zone of inhibition (31.12 ± 0.59 mm) against S. epidermidis, followed by CeO2NPs and NiONPs with zones of inhibition (25.53 ± 1.2 mm) and (21.42 ± 0.6 mm) against P. aeruginosa and S. epidermidis, respectively. This study demonstrated the efficiency of the synthesized nanomaterials in removing toxins such as OFX from contaminated water and can serve as potential antibacterial and antioxidant agents. Notably, the heterogeneous nanomaterials demonstrated remarkable stability across a broad pH range, promising reusability and indicated tremendous potential of waste biomass reduction and OFX effluent treatment.

Liquid foams: Properties, structures, prevailing phenomena and their applications in chemical/biochemical processes

Liquid foams are gas-liquid dispersions with flexible structures that provide high gas-liquid interfaces. This property nominates liquid foams as excellent gas-liquid contactors, systems that are widely used in the chemical and biochemical industries. However, challenges such as a lack of comprehensive understanding and foam instability have historically hindered their widespread industrial use in most applications. It was not until the recent development of nanofluidics, nanotechnology, surface science, and other related fields that the understanding, analysis, and control of foam phenomena improved. This led to the development of innovative stabilization techniques and foam-based unit operations in chemical and biochemical processes, each of which requires in-depth and exclusive reviews to fully comprehend their potential and limitations and to identify areas for further improvement and innovation. This paper reviews the foams, the common phenomena in them, the characteristics that make them suitable for chemical/biochemical engineering, reports on their current applications and recent developments in this field.

Advances in gum-based hydrogels and their environmental applications

Gum-based hydrogels (GBHs) have been widely employed in diverse water purification processes due to their environmental properties, and high absorption capacity. More desired properties of GBHs such as biodegradability, biocompatibility, material cost, simplicity of manufacture, and wide range of uses have converted them into promising materials in water treatment processes. In this review, we explored the application of GBHs to remove pollutants from contaminated waters. Water resources are constantly being contaminated by a variety of harmful effluents such as heavy metals, dyes, and other dangerous substances. A practical way to remove chemical waste from water as a vital component is surface adsorption. Currently, hydrogels, three-dimensional polymeric networks, are quite popular for adsorption. They have more extensive uses in several industries, including biomedicine, water purification, agriculture, sanitary products, and biosensors. This review will help the researcher to understand the research gaps and drawbacks in this field, which will lead to further developments in the future.

Effective Removal of Dyes from Wastewater by Osmanthus Fragrans Biomass Charcoal

The exploration of low-cost, high-performance adsorbents is a popular research issue. In this work, a straightforward method that combined hydrothermal with tube firing was used to produce Osmanthus fragrans biomass charcoal (OBC) from low-cost osmanthus for dye adsorption in water. The study examined the parameters of starting concentration, pH, and duration, which impacted the process of adsorption of different dyes by OBC. The analysis showed that the adsorption capacities of OBC for six dyes: malachite green (MG, C0 = 800 mg/L, pH = 7), Congo red (CR, C0 = 1000 mg/L, pH = 8), rhodamine B (RhB, C0 = 500 mg/L, pH = 6), methyl orange (MO, C0 = 1000 mg/L, pH = 7), methylene blue (MB, C0 = 700 mg/L, pH = 8), and crystalline violet (CV, C0 = 500 mg/L, pH = 7) were 6501.09, 2870.30, 554.93, 6277.72, 626.50, and 3539.34 mg/g, respectively. The pseudo-second-order model and the Langmuir isotherm model were compatible with the experimental findings, which suggested the dominance of ion exchange and chemisorption. The materials were characterized by using XRD, SEM, FTIR, BET, and XPS, and the results showed that OBC had an outstanding specific surface area (2063 m2·g-1), with potential adsorption mechanisms that included electrostatic mechanisms, hydrogen bonding, and π-π adsorption. The fact that the adsorption capacity did not drastically decrease after five cycles of adsorption and desorption suggests that OBC has the potential to be a dye adsorbent.

Thermodynamics, kinetics and isothermal studies of tartrazine adsorption onto microcline/MWCNTs nanocomposite and the regeneration potentials

The quest for a cheap, effective, and eco-friendly wastewater treatment technique that is free of secondary toxic byproducts, calls for the fabrication of a nature-friendly adsorbent with a robust capacity to decontaminate polluted water sources and be recycled. To this end, we report the fabrication of novel nanocomposite (KMCM) from microcline (KMC) and multiwall carbon nanotubes (MWCNTs). The adsorbents (KMC and KMCM) were characterized using XRD, BET, SEM, TGA and FTIR. The novel and low-cost nano sorbent were designed for the elimination of tartrazine (Tatz) from wastewater. The adsorption of Tatz onto KMC and KMCM was influenced by adsorbent dose, initial Tatz concentration, contact time and solution pH. Experimental data acquired from the equilibrium studies were well addressed by the Langmuir isotherm model. The maximum uptake capacity of 37.96 mg g^-1 and 67.17 mg g^-1 were estimated for KMC and KMCM. The kinetics for the adsorption of Tatz onto KMC and KMCM was best expressed by pseudo-second-order and Elovich models. The thermodynamic parameters revealed that the uptake of Tatz onto KMC and KMCM was an endothermic (ΔH: KMC = 35.0 kJ mol^-1 and KMCM = 42.91 kJ mol^-1), entropy-driven (ΔS: KMC = 177.6 J K^-1 mol^-1 and KMCM = 214.2 J K^-1 mol^-1) and spontaneous process. Meanwhile, KMCM demonstrated good reusability potential and superior adsorption efficiency when compared to other adsorbents.

Fabrication porous adsorbents templated from aqueous foams using astragalus membranaceus and attapulgite as stabilizer for efficient removal of cationic dyes

The water-based foam stabilized by the natural surfactant applied in the fabrication of porous materials has attracted extensive attention, as the advantages of cleanness, convenience and low cost. Particularly, the development of a green preparation method has became the main research focus and frontier. In this work, a green liquid foam with high stability was prepared by synergistic stabilization of natural plant astragalus membranaceus (AMS) and attapulgite (APT), and then a novel porous material with sufficient hierarchical pore structure was templated from the foam via a simple free radical polymerization of acrylamide (AM). The characterization results revealed that the amphiphilic molecules from AMS adsorbed onto the water-air interface and formed a protective shell to prevent the bubble breakup, and APT gathered in the plateau border and formed a three-dimensional network structure, which greatly slowed down the drainage rate. The porous material polyacrylamide/astragalus membranaceus/attapulgite (PAM/AMS/APT) showed the excellent adsorption performance for cationic dyes of Methyl Violet (MV) and Methylene Blue (MB) in water, and the maximum adsorption capacity could reach to 709.13 and 703.30 mg/g, respectively. Furthermore, the polymer material enabled to regenerate and cycle via a convenient calcination process, and the adsorption capacity was still higher than 200 mg/g after five cycles. In short, this research provided a new idea for the green preparation of porous materials and the treatment of water pollution.

Adsorption profile of anionic and cationic dyes through Fe3O4 embedded oxidized Sterculia gum/Gelatin hybrid gel matrix

Hazardous effluents from textile industries being major contributors of water pollution and impose potential adverse effects on environment. In present study, Fe₃O₄ embedded oxidized Sterculia gum/Gelatin hybrid matrix have been fabricated and evaluated for enrichment of methyl orange (MO) and methylene blue (MB). Newly synthesized matrix was characterized through powdered XRD, FTIR, FESEM, TEM and TGA. Integrated nanoparticles improved dye enrichment and facilitated removal of matrix from the aqueous solution under the influence of magnetic field. Influence of various reaction parameters viz.: contact time, adsorbent dose, initial dye concentration, temperature & pH of the adsorption medium on dye enrichment have been evaluated. Maximum adsorption (90 % and 88 % for MO and MB respectively) has been achieved. Langmuir, Freundlich and Tempkin adsorption isotherms have been evaluated. Experimental results validate well fitted Freundlich isotherm for MO and Temkin isotherm for MB. Adsorption kinetics has been analyzed through Pseudo first order, second order kinetic and intra particle diffusion models. Adsorption of both dyes was best explained via pseudo second order kinetic model. Negative value of Gibb's free energy change (-26.487 KJ mol ^-1 and - 24.262 KJ mol ^-1) for MB and MO at 303 K was an indication of spontaneity of the reaction.

Recent Progress on Modified Gum Katira Polysaccharides and Their Various Potential Applications

Gum katira polysaccharide is biocompatible and non-toxic, and has antioxidant, anti-microbial, and immunomodulatory properties. It is a natural polysaccharide and exudate derived from the stem bark of Cochlospermum reliogosum Linn. Additionally, it has many traditional medicinal uses as a sedative and for the treatment of jaundice, gonorrhea, syphilis, and stomach ailments. This article provides an overview of gum katira, including its extraction, separation, purification, and physiochemical properties and details of its characterization and pharmacognostic features. This paper takes an in-depth look at the synthetic methods used to modify gum katira, such as carboxymethylation and grafting triggered by free radicals. Furthermore, this review provides an overview of its industrial and phytopharmacological applications for drug delivery and heavy metal and dye removal, its biological activities, its use in food, and the potential use of gum katira derivatives and their industrial applications. We believe researchers will find this paper useful for developing techniques to modify gum katira polysaccharides to meet future demands.

Simultaneous and Efficient Removal of Oleophilic and Hydrophilic Stains from Polyurethane by the Combination of Easy-Cleaning and Self-Cleaning

The simultaneous and efficient removal of oleophilic and hydrophilic stains from polyurethane (PU) is realized by combining the easy-cleaning from the hydrophilic thermoresponsive hydrogel coating containing acrylamide (AAm), gum arabic (GA), and (ethylene glycol) methyl ether methacrylate (OEGMA₃₀₀) P(GA/AAm/OEGMA₃₀₀) and the self-cleaning from the embedded nonmetallic photocatalyst g-C₃N₄. Due to the existence of strong hydrogen bonds between the hydroxyl groups in the hybrid hydrogel coating and the hydroxyl/carboxyl groups in the plasma-treated PU, the hybrid hydrogel coating is very stable on PU. Simultaneously, the acrylamide network in the hybrid hydrogel coating enhances its mechanical strength. Because the transition temperature of OEGMA₃₀₀ is well above the room temperature, the cross-linked coating remains hydrophilic in ambient conditions. Thus, oleophilic stains, such as oil and grease, can be easily removed from the coating surface. In addition, the embedded photocatalyst g-C₃N₄ in the hybrid hydrogel coating introduces the extra capability of decomposing organic compounds under sunshine, which favors the removal of hydrophilic stains such as dyes and wines. After sunlight illumination and simply rinsing with water, both hydrophilic and oleophilic stains can be easily removed. Moreover, this joint cleaning performance can work for a long time. Even after four consecutive cycles, both the easy-cleaning to oleophilic stains by the hydrophilic hydrogel surface and self-cleaning to the hydrophilic stains by the embedded g-C₃N₄ remain unchanged.

Wrinkling on Stimuli-Responsive Functional Polymer Surfaces as a Promising Strategy for the Preparation of Effective Antibacterial/Antibiofouling Surfaces

Biocompatible smart interfaces play a crucial role in biomedical or tissue engineering applications, where their ability to actively change their conformation or physico-chemical properties permits finely tuning their surface attributes. Polyelectrolytes, such as acrylic acid, are a particular type of smart polymers that present pH responsiveness. This work aims to fabricate stable hydrogel films with reversible pH responsiveness that could spontaneously form wrinkled surface patterns. For this purpose, the photosensitive reaction mixtures were deposited via spin-coating over functionalized glasses. Following vacuum, UV, or either plasma treatments, it is possible to spontaneously form wrinkles, which could increase cell adherence. The pH responsiveness of the material was evaluated, observing an abrupt variation in the film thickness as a function of the environmental pH. Moreover, the presence of the carboxylic acid functional groups at the interface was evidenced by analyzing the adsorption/desorption capacity using methylene blue as a cationic dye model. The results demonstrated that increasing the acrylic acid in the microwrinkled hydrogel effectively improved the adsorption and release capacity and the ability of the carboxylic groups to establish ionic interactions with methylene blue. Finally, the role of the acrylic acid groups and the surface topography (smooth or wrinkled) on the final antibacterial properties were investigated, demonstrating their efficacy against both gram-positive and gram-negative bacteria model strains (E. coli and S. Aureus). According to our findings, microwrinkled hydrogels presented excellent antibacterial properties improving the results obtained for planar (smooth) hydrogels.

Trimethylamine functionalized radiation-induced grafted polyamide 6 fibers for p-nitrophenol adsorption

The method of pre-irradiation grafting was used with the aid of electron beam (EB) accelerator to accomplish the grafting of polyamide 6 fibers (PA6) with glycidyl methacrylate (GMA). The extent to which GMA was grafted on PA6 was found to be markedly influenced by the absorbed dose of radiation and the reaction time of grafting. Trimethylamine (TMA) was afterwards employed for the functionalization of GMA-grafted fibers (PA6-g-GMA). A range of analyses (e.g., FTIR, FESEM, XRD, BET, and pHpzc) were carried out to determine the physiochemical and morphological properties of the fibrous adsorbent. p-Nitrophenol (PNP) adsorption from aqueous solution was conducted with the resulting TMA-(PA6-g-GMA) adsorbent. The adsorption behaviour of PNP on the fibrous adsorbent was clarified by investigating the adsorption kinetics and isotherm. According to the results, the adsorption of PNP on TMA-(PA6-g-GMA) reflected the pseudo-second order model. Meanwhile, the isotherm analysis revealed that the best description of the equilibrium data was provided by Redlich-Peterson model, followed closely by Langmuir isotherm model. The achieved adsorption capacity was highest at 176.036 mg/g. Moreover, the adsorption was indicated by the thermodynamic analysis to be spontaneous and exothermic. Regeneration and recycling of the adsorbent was possible for a minimum of five cycles with no reduction in adsorption capacity. It was concluded that the fibrous adsorbent could have applications for the removal of PNP at industrial pilot scale.

Development of superabsorbent hydrogel based on Gum Arabic for enhanced removal of anxiolytic drug from water

The growing consumption of anxiolytic drugs like diazepam (DZP) has aggravated the problem of persistent organic pollutants in water. Due to its characteristics, the removal of DZP from water and wastewater is a challenging task. As an effort to deals with this issue, in this study, we report the development of a hydrogel based on Gum Arabic (GA) grafted with poly(acrylic acid) (GA-g-PAAc) to be used in the adsorptive removal of DZP from water. The hydrogel formation was confirmed by Fourier-transform infrared (FTIR) spectroscopy and thermal analysis (TGA/DTG) analyses. Images obtained by scanning electron microscopy (SEM) revealed that GA-g-PAAc hydrogel exhibits a porous morphology while swelling experiments suggest a superabsorbent characteristic (degree of swelling> 600%). From batch experiments, it was found that the removal of DZP reached remarkable percentages (>80%) before 300 min in moderate experimental conditions (pH 7, 25 °C, 150 mg of adsorbent). The adsorption of DZP on GA-g-PAAc followed the pseudo-first order kinetics, and the mechanism was described by the linear Langmuir isotherm. The maximum adsorption capacity (q_max) was calculated to be 15.16 mg g^-1 (at 25 °C), which is comparable or superior to other adsorbent materials used in DZP removal. Reuse experiments showed that GA-g-PAAc keeps appreciable adsorption ability even after five reuse cycles. The results reported here suggest this superabsorbent hydrogel could be a promising adsorbent material to treat water contaminated by anxiolytic drugs, like DZP.

Insights into the p-nitrophenol adsorption by amidoxime-modified poly(acrylonitrile-co-acrylic acid): characterization, kinetics, isotherm, thermodynamic, regeneration and mechanism study

This study performs an appraisal of the adsorptive capacity of amidoxime-modified poly(acrylonitrile-co-acrylic acid) or abbreviated as (AO-modified poly(AN-co-AA)) for the p-nitrophenol (PNP) adsorption, from aquatic environments via batch system. The AO-modified poly(AN-co-AA) polymer was developed with redox polymerization, and then altered by using hydroxylamine hydrochloride (HH). Tools used to describe the physicochemical and morphological characteristics of the AO-modified poly(AN-co-AA) were Fourier transform infrared (FTIR) spectroscopy, CHN elemental analysis, X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM). The adsorption kinetics were examined by pseudo-first order, pseudo-second order, Elovich and intraparticle diffusion kinetic models. Meanwhile, the isotherms were investigated by Langmuir, Freundlich, Temkin and Redlich-Peterson models. It was found that the adsorption was best fitted with pseudo-second order, and agreed with both Langmuir and Freundlich isotherm models. It was described best with the Freundlich isotherm due to highest R 2 (0.999). The maximum adsorption capacity was 143.06 mg g-1 at 298 K, and thermodynamic functions showed that the adsorption process was exothermic. Also, following five regeneration cycles, the adsorbent recorded 71.7% regeneration efficiency. The finding in this study indicates that the AO-modified poly(AN-co-AA) is an effective adsorbent to remove PNP from an aqueous solution.

Studies of simultaneous electrochemical sensing of Hg2+ and Cd2+ ions and catalytic reduction properties of 4-nitrophenol by CuO, Au, and CuO@Au composite nanoparticles synthesised using a graft copolymer as a bio-template

Simultaneous electrochemical detection of Hg2+ and Cd2+ ions and catalytic reduction of 4NP to 4AP using a novel synthesized graft copolymer/CuO@Au NPs composite.

Preparation of bio-inspired trimethoxysilyl group terminated poly(1-vinylimidazole)-modified-chitosan composite for adsorption of chromium (VI) ions

Chitosan and poly(1-vinylimidazole) are both potential adsorbents to remove Cr(VI). Here, we designed the preparation of new adsorbents by combining chitosan and poly(1-vinylimidazole) to get the synergistic effect for the removal of hexavalent chromium. Trimethoxysilyl group terminated poly(1-vinylimidazole)-modified-chitosan composite was successfully synthesized by one-step free radical polymerization based on the grafting backbone of chitosan and vinylimidazole. The resulting adsorbents were used for the removal of Cr(VI) ions from the aqueous solution. The modified chitosan composite was characterized by ATR, FTIR, BET isotherm studies, elemental analysis, TGA, DSC, FE-SEM, and EDX. ATR. FTIR results confirmed the presence of the imidazole group in modified chitosan. The adsorption results were described by the Langmuir isotherm model with a maximum adsorption capacity of 196.1 mg/g for modified chitosan, however, the chitosan yielded 151.5 mg/g. It has been observed that the adsorption of chromium fitted better with the pseudo-second-order kinetics. The modified chitosan composite exhibited greater adsorption capacity than chitosan for hexavalent chromium and has potential application for Cr(VI) removal from aqueous solution containing other common ions with regeneration ability. This novel approach of modifying chitosan with telomerized poly(1-vinyl imidazole) offers potential application in wastewater treatment of different industries releasing Cr (VI).

Adsorptive Removal of Methylene Blue from Aquatic Environments Using Thiourea-Modified Poly(Acrylonitrile-co-Acrylic Acid)

The paper evaluates the adsorptive potential of thiourea-modified poly(acrylonitrile-co-acrylic acid), (TA-poly(AN-co-AA)) for the uptake of cationic methylene blue (MB) from aquatic environments via a batch system. TA-poly(AN-co-AA) polymer was synthesized through redox polymerization and modified with thiourea (TA) where thioamide groups were introduced to the surface. Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), CHNS and Zetasizer were used to characterize the physico-chemical and morphological properties of prepared TA-poly(AN-co-AA). Afterwards, it was confirmed that incorporation of thioamide groups was successful. The adsorption kinetics and equilibrium adsorption data were best described, respectively, by a pseudo-second-order model and Freundlich model. Thermodynamic analysis showed the exothermic and spontaneous nature of MB uptake by TA-poly(AN-co-AA). The developed TA-poly(AN-co-AA) polymer demonstrated efficient separation of MB dye from the aqueous solution and maintained maximum adsorption capacity after five regeneration cycles. The findings of this study suggested that synthesized TA-poly(AN-co-AA) can be applied successfully to remove cationic dyes from aquatic environments.

Continuous dye adsorption and desorption on an invasive macrophyte (Salvinia minima)

The continuous adsorption-desorption of methylene blue (MB) on an invasive macrophyte, Salvinia minima, was investigated in fixed-bed columns. The effects of bed depth (h) (9.30, 18.70, and 28 cm), inlet dye concentration (C₀) (51 ± 1.20, 154 ± 2.00, and 250 ± 1.50 mg L^-1), and flow rate (Q) (7 and 14 mL min^-1) on dye removal and breakthrough curves were assessed. Thomas, modified dose-response (MDR) and bed depth service time (BDST) models were fitted to the experimental data. Desorption and regeneration studies were also performed. The breakthrough time was affected by h, C₀, and Q. The dynamic bed capacity at the breakthrough point (q_b) increased with increasing h but decreased with increasing C₀ and Q. Dynamic bed capacities (q_e) from 318 to 322 mg g^-1 were achieved at h = 28 cm, C₀ = 154 ± 2.0, or 250 ± 1.50 mg L^-1, independently of the Q value. High MB removals were also observed (75-78%). FTIR analysis revealed that hydroxyl and carboxyl groups could be involved in dye adsorption. MDR and BDST models were both successfully used to predict the breakthrough curves of MB adsorption onto S. minima. A high regeneration efficiency (> 87%) was obtained after three adsorption-desorption cycles. These results confirm that the use of S. minima biomass could be a very efficient and eco-friendly alternative for MB adsorption in continuous mode.

In situ preparation of Tricholoma mushroom polysaccharide-g-poly(N,N-dimethyl acrylamide-co-acrylic acid)–CuO composite nanoparticles for highly sensitive and selective sensing of Th4+ in aqueous medium

A highly selective and sensitive sensor for Th⁴⁺ was developed for the first time using Tricholoma mushroom polysaccharide-based graft copolymer–CuO composite nanoparticles by colorimetric and electrochemical method.