One-pot preparation of AgBr/α-Ag2WO4 composite with superior photocatalytic activity under visible-light irradiation

Controlled solvothermal synthesis of self-assembled SrTiO3 microstructures for expeditious solar-driven photocatalysis dye effluents degradation

In this work, the self-assembled SrTiO3 (STO) microstructures were synthesized via a facile one-step solvothermal method. As the solvothermal temperature increased from 140 °C to 200 °C, the STO changed from a flower-like architecture to finally an irregularly aggregated flake-like morphology. The photocatalytic performance of as-synthesized samples was assessed through the degradation of rhodamine B (RhB) and malachite green (MG) under simulated solar irradiation. The results indicated that the photocatalytic performance of STO samples depended on their morphology, in which the hierarchical flower-like STO synthesized at 160 °C demonstrated the highest photoactivities. The photocatalytic enhancement of STO-160 was benefited from its large surface area and mesoporous configuration, hence facilitating the presence of more reactive species and accelerating the charge separation. Moreover, the real-world practicality of STO-160 photocatalysis was examined via the real printed ink wastewater-containing RhB and MG treatment. The phytotoxicity analyses demonstrated that the photocatalytically treated wastewater increased the germination of mung bean seeds, and the good reusability of synthesized STO-160 in photodegradation reaction also promoted its application in practical scenarios. This work highlights the promising potential of tailored STO microstructures for effective environmental remediation applications.

Novel inner filter effect-based near-infrared electrochemiluminescence sensor mediated by well-matched AgBr-nitrogen-doped Ti3C2 MXene and nonmetallic plasmon WO3•H2O

The development of innovative and efficient strategy is of paramount importance for near-infrared (NIR) electrochemiluminescence (ECL) sensing, which can substantially promote ECL detection in a wide range of situations. Herein, the inner filter effect (IFE) strategy was designed to construct an ultrasensitive NIR ECL biosensor based on the well-matched AgBr nanocrystals (NCs) decorated nitrogen-doped Ti3C2 MXene nanocomposites (AgBr-N-Ti3C2) and hydrated defective tungsten oxide nanosheets (dWO3•H2O). Specifically, the AgBr-N-Ti3C2 nanocomposites displayed extremely effective NIR ECL emission because N-doping could accelerate electron transfer and boost the red-shift of the ECL spectrum. The nonmetallic plasmon dWO3•H2O was used as an absorber due to its facile tuning of the spectra overlap and higher molar extinction coefficients. Time-resolved emission decay curves proved that the decreased ECL intensity was ascribed to the IFE-based steady quenching mechanism. With the support of tetracycline (TC) aptamer and the complementary DNA chain, the fabricated NIR ECL-IFE biosensor performed a wide linear range of 100 nM ∼ 10 fM with a low detection limit of 2.2 fM (S/N = 3), and it exhibited excellent stability, sensitivity, and reproducibility, so as to be applied to real samples. This strategy opens a new avenue to constructing an efficient NIR ECL-IFE system and shows excellent practical potential in actual sample analysis.

Comprehensive analysis (aerobic/anaerobic, molecular recognitions, band-position and degradation-mechanism) of undoped and Co-doped anatase-brookite - An experimental/theoretical evaluation of the less-studied TiO2 mixed phase

The molecular recognition (MRec) effect is required in the initial phase of organic reactions. The second stage involves molecular-orientations and molecular-orbitals energy-levels (MOrbE). The components of a reaction must be compatible in terms MRec and MOrbE. Therefore, the comprehension of photocatalytic systems applied in wastewater treatment will be improved if the MRec effect is also considered as an important factor. The purpose of this study is to provide a comprehensive understanding of the less studied anatase-brookite mixed-phase (doped and undoped). Anatase/brookite photocatalytic systems were evaluated utilizing experimental/theoretical approaches in H₂O (aerobic/anaerobic) environments with Vis-light and the organic pollutant (OrPo) methyl orange (MO). The compatibility of MRec and MOrbE of anatase-brookite mixed-phase (with the different reactive system components) confirmed this is the optimal combination for photocatalytic application. Using the sol-gel method, AM-TiO₂NP (amorphous), TiO₂NP (crystalline), and TiO₂NP-Co0.1 at% (crystalline Co-doped) anatase-brookite mixed-phase photocatalysts were obtained. The morphology and surface were characterized using XRD, BET, SEM, HR-TEM, FT-IR and XPS. Employing UV-vis DRS and PL, photo-response and electron-hole recombination were studied. LVS and Mott-Schottky plot were employed to determine photo-electrochemical activity. The results of TiO₂NP photocatalytic degradation in both aerobic and anaerobic environments are remarkable. The results of molecular dynamics (MD) simulation and Fukui Function (FF) based on density functional theory (DFT) validate the remarkable photocatalytic MO degradation.

A novel S-scheme Ws2/BiYWO6 electrostatic heterostructure for enhanced photocatalytic degradation performance towards the degradation of Rhodamine B

Constructing S-scheme heterojunction between two semiconductor materials is an effective route to increase the photocatalytic degradation efficiency. Here, a novel S-scheme WS₂/BiYWO₆ heterojunction photocatalyst was prepared by wet chemical route. At the same time, the photocatalytic degradation performance of the fabricated materials was analyzed by the degradation of Rhodamine B under visible light. Of all prepared WS₂/BiYWO₆ composites, the 20 wt.% WS₂ loaded WS₂/BiYWO₆ composite exhibited an enhanced photocatalytic degradation ability than other prepared photocatalysts. Here, O₂^·- and ^·OH radicals are performing a pivotal role in the Rhodamine B degradation and the optimized composite shows greater photocurrent intensity than pure BiYWO₆ and WS₂, respectively. Also, the synthesized photocatalyst maintains its stability with negligible changes even after three cycles. Thereby, the constructed S-scheme WS₂/BiYWO₆ heterojunction is a potential material for the wastewater remediation.

Immobilization of photocatalytic materials for (waste)water treatment using 3D printing technology - advances and challenges

Photocatalysis has been considered a promising technology for the elimination of a wide range of pollutants in water. Various types of photocatalysts (i.e., homojunction, heterojunction, dual Z-scheme photocatalyst) have been developed in recent years to address the drawbacks of conventional photocatalysts, such as the large energy band gap and rapid recombination rate of photogenerated electrons and holes. However, there are still challenges in the design of photocatalytic reactors that limit their wider application for real (waste)water treatment, such as difficulties in their recovery and reuse from treated (waste)waters. 3D printing technologies have been introduced very recently for the immobilization of materials in novel photocatalytic reactor designs. The present review aims to summarize and discuss the advances and challenges in the application of various 3D printing technologies (i.e., stereolithography, inkjet printing, and direct ink writing) for the fabrication of stable photocatalytic materials for (waste)water treatment purposes. Furthermore, the limitations in the implementation of these technologies to design future generations of photocatalytic reactors have been critically discussed, and recommendations for future studies have been presented.

Visible-light-driven photodegradation of organic pollutants by simply exfoliated kaolinite nanolayers with enhanced activity and recyclability

The need for abundant photocatalyst in wastewater treatment is currently a must. A simple intercalation process was utilized to exfoliate Kaolinite clay mineral structure Al₂Si₂O₅(OH)₄ into two-dimensional nanostructured separated layers operated in visible light range. The intercalating agents were hydrazine hydrate and urea. Detailed characterization confirmed the nanolayered structures of kaolinite hexagonal nanosheets (NK). In addition, Bandgap energy was reduced based on intercalating agents from 3.45 to 2.48 eV as revealed by light absorption spectra. The quenching of PL spectra for the nK has also been ascribed to the suppression of charge carrier recombination. The exfoliated nK was utilized to photodegrade Rhodamine B dye (RhB) and P-nitrophenol (PNP) as industrial pollutants in wastewater. The results showed 92.3% and 99.7% photodegradation of RhB and PNP within 180 min of visible-light irradiation utilizing the exfoliated NK by urea. We denote the boosted photocatalytic performance of this NK to the uncovered, low bandgap metal oxide inclusions on the exterior of NK besides the nitrogen doping due to exfoliation with urea. This simple exfoliation has modified abundant and stable clay nanolayers that are a promising alternative for the eminent nanostructured oxide photocatalysts to overcome the organic pollutants in wastewater at a high scale.

Enhanced photocatalytic degradation of malachite green dye by highly stable visible-light-responsive Fe-based tri-composite photocatalysts

A novel visible-light-sensitive ZnVFeO₄ photocatalyst has been fabricated by the precipitation method at different pH values for the enhanced photocatalytic degradation of malachite green (MG) dye as a representative pollutant under visible light irradiation at neutral pH conditions. The structure and optical characteristics of the prepared photocatalysts were investigated by XRD, FTIR, N2 adsorption-desorption, TEM, diffuse reflectance spectroscopy (DRS), and photoluminescence (PL) analyses. In addition, the photocatalytic activity of ZnVFeO₄ photocatalysts superior the efficiency to be more than that of the mono and bi-metal oxides of iron and iron zinc oxides, respectively. The best sample, ZnVFeO₄ at pH 3, significantly enhances the degradation rate under visible light to be 12.7 × 10^-3 min^-1 and can retain a stable photodegradation efficiency of 90.1% after five cycles. The effect of the catalyst dose and the initial dye concentration on the photodegradation process were studied. This promising behavior under visible light may be attributed to the low bandgap and the decreased electron-hole recombination rate of the ZnVFeO₄ heterostructures. The scavenger experiment confirmed that the hydroxyl radicals induced the MG photodegradation process effectively. Hence, the ZnVFeO₄ is a reliable visible-light-responsive heterostructure photocatalyst with excellent potential for the photodegradation of organic pollutants in wastewater treatment.

Preparation of Ag3PO4/CoWO4 S-scheme heterojunction and study on sonocatalytic degradation of tetracycline

In this study, 0.6Ag₃PO₄/CoWO₄ composites were synthesized by hydrothermal method. The prepared materials were systematically characterized by techniques of scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), N₂ adsorption/desorption, and UV-vis diffuse reflectance spectrum (DRS). Furthermore, the sonocatalytic degradation performance of 0.6Ag₃PO₄/CoWO₄ composites towards tetracycline (TC) was investigated under ultrasonic radiation. The results showed that, combined with potassium persulfate (K₂S₂O₈), the 0.6Ag₃PO₄/CoWO₄ composites achieved a high sonocatalytic degradation efficiency of 97.89 % within 10 min, which was much better than bare Ag₃PO₄ or CoWO₄. By measuring the electrochemical properties, it was proposed that the degradation mechanism of 0.6Ag₃PO₄/CoWO₄ is the formation of S-scheme heterojunction, which increases the separation efficiency of electron-hole pairs (e^--h⁺) and generates more electrons and holes, thereby enhancing the degradation activity. The scavenger experiments confirmed that hole (h⁺) was the primary active substance in degrading TC, and free radicals (OH) and superoxide anion radical (O₂^-) were auxiliary active substances. The results indicated that 0.6Ag₃PO₄/CoWO₄ nanocomposites could be used as an efficient and reliable sonocatalyst for wastewater treatment.

Revealing the charge transfer mechanism in magnetically recyclable ternary g-C3N4/BiOBr/Fe3O4 nanocomposite for efficient photocatalytic degradation of tetracycline antibiotics

Pharmaceutical compounds in water bodies pose hazards to the ecosystem because of their biotoxicity potency. To eradicate such pharmaceutical compounds, a novel g-CN/BiOBr/Fe₃O₄ nanocomposites was prepared using a simplistic route and appraised for photodegradation of model tetracycline antibiotics. The g-CN/BiOBr/Fe₃O₄ nanocomposites exhibited complete tetracycline degradation in just 60 min exposure of simulated light irradiation, which is 6 times higher than the g-CN. Under the analogous condition, the tetracycline mineralization ability of the g-CN/BiOBr/Fe₃O₄ nanocomposites was evaluated to be 78% of total organic carbon removal. The superior photocatalytic performance is ascribed to the extended visible light harvesting ability and enhanced charge carrier separation/transfer with impeded recombination rate in light of effective indirect Z-scheme heterojunction construction. Based on band-edge potential and radical trapping studies indicate that h⁺ > •O₂^- > •OH are the active species responsible for photodegradation. Furthermore, the ternary nanocomposites are magnetically retrievable and recyclable while retaining their stable photocatalytic performance. This work endows a new perspective on the rational design and construction of magnetically recoverable ternary nanocomposite for environmental remediation.

Coprecipitation aided synthesis of bimetallic silver tungstate: a response surface simulation of sunlight-driven photocatalytic removal of 2,4-dichlorophenol

In the present study, the response surface methodology (RSM) model was used to investigate the photocatalytic performance of silver tungstate (Ag₂WO₄) in the removal of 2,4-dichlorophenol (2,4-DCP) under natural sunlight. The Ag₂WO₄ which has nanoflower-like structure was synthesized by a coprecipitation method. The synthesized photocatalyst was characterized for FESEM, TEM, EDX, XRD, FTIR, and UV-Vis spectroscopy. RSM was employed to scrutinize the suitable model to yield a profound pollutant removal rate. The four independent factors such as pollutant concentration, catalyst dosage, pH, and contact time are simulated using RSM. A total of 91% of 2,4-DCP degradation was achieved at a higher catalyst dosage and lower pollutant concentration with a contact duration of 8 h in an alkaline pH condition. The coefficient of regression (R²) and probability value (P) were 0.98 and 0.0472, respectively, which confirmed the ideality of RSM modeling. The study discusses on the possible photocatalytic degradation mechanisms of 2,4-DCP. The results showed a significant dependence of the photocatalytic removal of 2,4-DCP on the functional parameters.

One-pot synthesis of bismuth yttrium tungstate nanosheet decorated 3D-BiOBr nanoflower heterostructure with enhanced visible light photocatalytic activity

A visible light driven BiOBr/Bi_xY_1-xWO₆ nanocomposite photocatalyst of various compositions are prepared by the addition of different amounts of KBr (0.5, 1.0, 1.5, 2.0 mmol) in Bi_xY_1-xWO₆ by a one-pot hydrothermal method. Furthermore, the photocatalytic properties of the as-prepared materials are analyzed by the decomposition of methylene blue under visible light illumination. In particular, the BiOBr/Bi_xY_1-xWO₆ nanocomposite prepared by taking 1.5 mmol of KBr present a superior photocatalytic ability (78.3%) with the rate constant value 0.016 min^-1, a low bandgap (E_g = 2.51 eV) as well as photoluminescence emission intensity than other photocatalysts prepared in this study. The radical scavenging studies revealed that OH and h⁺ performed an imperative role in the decomposition of methylene blue. Furthermore, the optimized photocatalyst is stable even after four cycles, which exposes the excellent photostability and reusability properties of the photocatalyst. In addition, a plausible mechanism of decomposition of methylene blue under visible light irradiation is also proposed.

Influence of Ce3+ on the Structural, Morphological, Magnetic, Photocatalytic and Antibacterial Properties of Spinel MnFe2O4 Nanocrystallites Prepared by the Combustion Route

The present work describes the effect of Ce3+ ion doping on the structural, morphological, and magnetic properties of spinel manganese ferrite (MnFe2O4) nanocrystallites (NCs) using various instrument techniques. Rare earth element (REE) Cerium (Ce3+) doped MnFe2O4 NCs were prepared by a simple microwave combustion technique. In the present scenario, ferrites are widely used for photocatalytic dye degradation and antibacterial applications. Aiming to achieve this, we prepared Ce3+ doped MnFe2O4 NCs by microwave combustion method and urea as burning agent and the obtained powder samples were characterized by powder X-ray diffraction (XRD), Fourier transform infrared (FT-IR), high resolution scanning electron microscope (HR-SEM), high resolution transmission electron microscope (HR-TEM) and vibration sample magnetometer (VSM) techniques. The pure spinel phase formation was confirmed by XRD analysis. FTIR spectra show two prominent absorption bands under 1000 cm−1, which confirms the formation of the spinel structure. HR-SEM and HR-TEM pictures demonstrated a sphere-shaped morphology and also expose the combination and agglomeration of grains, which are mostly due to the magnetic characteristics of the samples. The magnetic properties of the synthesized MnCexFe2−xO4 (x = 0.0, 0.1, 0.3, and 0.5) NCs were studied by VSM analysis at room temperature (RT) shows ferromagnetic behavior. The photodegradation results showed that MnFe2O4 and Ce doped MnFe2O4 NCs have a higher potential to degrade methylene blue (MB) and the sample MnCe0.3Fe1.7O4 NCs showed superb photocatalytic performance (91.53%) compared to other samples. The antibacterial activities of Gram-positive S. aureus, B. subtilis and Gram-negative K. pneumonia and E. coli were investigated using pure and Ce3+ substituted MnFe2O4 NCs and a higher activity for MnCe0.3Fe1.7O4 NCs than other samples was observed, which indicated that they can be used in biomedical applications.

Toxicity of α-Ag2WO4 microcrystals to freshwater microalga Raphidocelis subcapitata at cellular and population levels

Silver-based materials have microbicidal action, photocatalytic activity and electronic properties. The increase in manufacturing and consumption of these compounds, given their wide functionality and application, is a source of contamination to freshwater ecosystems and causes toxicity to aquatic biota. Therefore, for the first time, we evaluated the toxicity of the silver tungstate (α-Ag₂WO₄), in different morphologies (cube and rod), for the microalga Raphidocelis subcapitata. To investigate the toxicity, we evaluated the growth rate, cell complexity and size, reactive oxygen species (ROS) production and chlorophyll a (Chl a) fluorescence. The α-Ag₂WO₄ - R (rod) was 1.7 times more toxic than α-Ag₂WO₄-C (cube), with IC₁₀ and IC₅₀ values of, respectively, 8.68 ± 0.91 μg L^-1 and 13.72 ± 1.48 μg L^-1 for α-Ag₂WO₄ - R and 18.60 ± 1.61 μg L^-1 and 23.47 ± 1.16 μg L^-1 for α-Ag₂WO₄-C. The release of silver ions was quantified and indicated that the silver ions dissolution from the α-Ag₂WO₄ - R ranged from 34 to 71%, while the Ag ions from the α-Ag₂WO₄-C varied from 35 to 97%. The α-Ag₂WO₄-C induced, after 24 h exposure, the increase of ROS at the lowest concentrations (8.81 and 19.32 μg L^-1), whereas the α-Ag₂WO₄ - R significantly induced ROS production at 96 h at the highest concentration (31.76 μg L^-1). Both microcrystal shapes significantly altered the cellular complexity and decreased the Chl a fluorescence at all tested concentrations. We conclude that the different morphologies of α-Ag₂WO₄ negatively affect the microalga and are important sources of silver ions leading to harmful consequences to the aquatic ecosystem.

Hierarchical hollow-tubular porous carbon microtubes prepared via a mild method for supercapacitor electrode materials with high volumetric capacitance

In this paper, hollow-tubular porous carbons were synthesized from abundant biomass Cycas fluff (CF) through simple carbonization followed by an NaHCO₃ mild activation process. After activation, the tubular structure of the CF was retained, and a hierarchical structure of micropores, mesopores and macropores was formed. When the optimal mass ratio of NaHCO₃/CF is 2, the obtained porous carbon CF-HPC-2 sample has a large specific surface area (SSA) of 516.70 m² g⁻¹ in Brunauer–Emmett–Teller (BET) tests and a total pore volume of 0.33 cm³ g⁻¹. The C, O, N and S contents of CF-HPC-2 were tested as 91.77 at%, 4.09 at%, 3.54 at%, and 0.6 at%, respectively, by elemental analysis. Remarkably, CF-HPC-2 exhibits a high volume capacitance (349.1 F cm⁻³ at 1 A g⁻¹) as well as a higher rate capability than other biomass carbon materials (289.1 F cm⁻³ at 10 A g⁻¹). Additionally, the energy density of the CF-HPC-2 based symmetric supercapacitor in 2 M Na₂SO₄ electrolyte at 20 kW kg⁻¹ is 27.72 W h kg⁻¹. The particular hollow tubular morphology and activated porous structure determine the excellent electrochemical performance of the material. Hence, this synthetic method provides a new way of storing energy for porous carbon as high volumetric capacitance supercapacitor materials.

In this paper, hollow-tubular porous carbons were synthesized from abundant biomass Cycas fluff (CF) through simple carbonization followed by an NaHCO₃ mild activation process.

Ultrasensitive near-infrared aptasensor for enrofloxacin detection based on wavelength tunable AgBr nanocrystals electrochemiluminescence emission triggered by O-terminated Ti3C2 MXene

Toxic-free and easily accessible electrochemiluminescence (ECL) emitter/luminophore with near-infrared (NIR) emission is highly anticipated for ECL biosensor evolution. In this study, well-dispersed AgBr nanocrystals (NCs) decorated Ti₃C₂ MXene nanocomposites (Ti₃C₂-AgBrNCs) were prepared using a simple wet chemical technique and demonstrated highly efficient NIR ECL emission. For the first time, Ti₃C₂-AgBrNCs displayed wavelength-tunable ECL emission with varied Ti₃C₂ contents. Interestingly, further experimental data revealed that the ECL emission wavelength of Ti₃C₂-AgBrNCs red-shifted from 550 to 665 nm as Ti₃C₂ content increased, which can be attributed to the surface-defect effect generated by the oxygen-containing functional groups in Ti₃C₂ MXene. In particular, the ECL emission at 665 nm of Ti₃C₂-AgBrNCs nanocomposites not only revealed a 3.5 times increased ECL intensity but also a more stable ECL signal compared to pure AgBr NCs. As a proof of concept, a direct-type NIR ECL aptasensor with signal-on strategy was constructed with the Ti₃C₂-AgBrNCs nanocomposites as an ECL platform and enrofloxacin (ENR) as a model analyte. The NIR ECL aptasensor exhibited high sensitivity, a wide linear range from 1.0 × 10^-12 mol/L to 1.0 × 10^-6 mol/L and a low detection limit (5.97 × 10^-13 mol/L). This research offered a viable alternative way for producing toxic-free and efficient near-infrared ECL luminophores in bioanalysis and wavelength-tuning light-emitting devices.

Catalytic Use toward the Redox Reaction of Toxic Industrial Wastes in Innocuous Aqueous Medium and Antibacterial Activity of Novel Cu x Ag x Zn1-2x O Nanocomposites

In this work, we report the redox properties in organic catalytic transformation and antibacterial activity of novel Cu x Ag x Zn1-2x O nanocomposites. Cu- and Ag-doped ZnO [Cu x Ag x Zn1-2x O (x = 0.1)] (CAZ), Cu-doped ZnO [Cu x Zn1-x O (x = 0.1)] (CZ), and Ag-doped ZnO [Ag x Zn1-x O (x = 0.1)] (AZ) were prepared via a chemical co-precipitation method. The synthesized nanocomposites were characterized using different spectroscopic techniques. The catalytic activity of CAZ, CZ, and AZ was examined for the reduction of 4-nitrophenol (4-NP) and 4-nitroaniline (4-NA) in the presence of NaBH4 in an aqueous medium. The photocatalytic oxidation efficiency of these catalysts was also observed against naphthol orange (NO) under ultraviolet light. It was found that the catalytic reduction and oxidation efficiency of CAZ is higher than that of CZ and AZ in 4-NP/4-NA and NO in a water solvent, respectively. The antibacterial property of CAZ was also studied against Gram-positive and Gram-negative bacteria by agar well diffusion and the minimum inhibitory concentration methods. It was found that CAZ shows better antimicrobial activity compared to its parental Cu(NO3)2·3H2O, AgNO3, and ZnO. Therefore, the incorporation of Cu and Ag into ZnO increases its catalytic and antimicrobial activity remarkably. Fourier-transform infrared and X-ray diffraction (XRD) studies of CAZ indicate the incorporation of Cu and Ag into the lattice of ZnO. The phase structure of CAZ was wurtzite hexagonal, and the average crystallite size was 93 ± 1 nm measured from XRD. The average grain size and particle size of CAZ were found to be 200 and 100 ± 5 nm originating from SEM and transmission electron microscopy studies, respectively. The optical energy band gap of CAZ is 3.15 eV, which supports the excellent photocatalyst under UV light. CAZ also exhibits good agreement for photoluminescence properties with a high intensity peak at 571 nm, indicating surface oxygen vacancies and defects which might be responsible for higher photocatalytic activity compared to others. The nanocomposite shows excellent reusability without any significant loss of activity.

Effect of Ce3+ Ions Doped NiFe₂O₄ Magnetic Nanoparticles on Photocatalytic Degradation of Rhodamine B and Antibacterial Activities

In this study, spinel NiCe_xFe_2-XO₄ (x = 0.0 - 0.5) nanoparticles (NPs) was synthesized by microwave combustion technique (MCT) utilizing the fuel of Aloe vera plant extract. The establishment of spinel cubic crystal structure was ensured by powder X-ray diffraction (PXRD) technique. The particles like nanostructured morphology were confirmed by high-resolution scanning electron microscope (HRSEM). Energy dispersive X-ray (EDX) studies confirmed the formation of spinel ferrite structure and ensured that no other elements were present. Magnetic parameters such as remanant magnetisation (Mr), coercivity (He) and saturation magnetization (Ms) were calculated from the magnetic hysteresis (M-H) loops, which exhibited ferromagnetic behaviour. The photocatalytic behavior was investigated by visible light treatment for the photocatalytic degradation (PCD) of rhodamine B (Rh-B) dye and the sample NiCe_0.3Fe_1.7O₄ exhibits higher PCD efficiency (93.88%) than other compositions. The antibacterial activities of gram-positive S. aureus, B. subtilis, gramnegative K. pneumonia and E. coli have been investigated using undoped and Ce³⁺ substituted NiFe₂O₄ NPs and observed higher activity, which indicated that, they can be used in the bio-medical applications.

Fabrication of novel AgVO3/BiOI nanocomposite photocatalyst with photoelectrochemical activity towards the degradation of Rhodamine B under visible light irradiation

In the present work, a visible light driven AgVO₃/BiOI nanocomposite photocatalyst with different wt % (1, 2, 3) of AgVO₃ was fabricated by using facile hydrothermal method. Further, the nanocomposite was characterized by FT-IR, XRD, SEM, TEM, EDS, UV-vis DRS, photoluminescence and photoelectrochemical studies. The structural characterization showed nanorods on nanosheet surface. Among different AgVO₃ loaded samples, the photocatalytic efficiency of 1 wt % AgVO₃/BiOI nanocomposite was found to be comparatively higher than the pure BiOI and AgVO₃. The photodegradation rate constant values of pure BiOI, AgVO₃ and 1, 2, 3 wt % AgVO₃/BiOI nanocomposites are 0.006, 0.0033, 0.0255, 0.01575, 0.0116 min^-1 respectively. This enhanced photocatalytic activity was due to the increasing visible light absorption ability and efficient separation of the charge carriers. Thereby, the 1 wt % AgVO₃/BiOI nanocomposite photocatalyst exhibited increased photodegradation activity, photostability and recyclability characteristics. The radical trapping experiment confirmed the role of OH and h⁺ in the photocatalytic degradation of RhB. Based on this, the probable mechanism of degradation of RhB under visible light irradiation has also been proposed. Hence, we believe it could be a promising material that can be employed for the photodegradation of organic pollutants present in wastewater.

Production of copper nanoparticles exhibiting various morphologies via pulsed laser ablation in different solvents and their catalytic activity for reduction of toxic nitroaromatic compounds

Comparative experiments were conducted to determine the effects of various solvents (i.e., deionized water, methanol, ethanol, 1-propanol, butanol, ethylene glycol, hexane, and acetonitrile) on the final compositions, morphologies, and catalytic activities of copper-based nanoparticles (NPs). The NPs were effectively synthesized by pulsed laser ablation (PLA) using a copper plate as the target. The obtained copper NPs were characterized utilizing various analytical techniques. It was established that the developed methodology allows for the production of NPs with different morphologies and compositions in a safe and simple manner. When laser ablation of a solid copper plate was performed in acetonitrile, the formation of copper(I) cyanide cubes was observed. On the other hand, in deionized water and methanol, spherical and rod-like particles of copper(I) and copper(II) oxide were detected, respectively. The catalytic activity of the prepared copper NPs in the reduction of aromatic nitro compounds, such as 4-nitrophenol and nitrobenzene, was also evaluated. A high k value was determined for the reduction over the copper(II) oxide NPs produced in methanol. Moreover, particles with graphitic carbon (GC) layers exhibited superior catalytic performance in the reduction of a hydrophobic substance, i.e., nitrobenzene, over the reduction of 4-nitrophenol. The enhanced catalytic activity of this catalyst may be due its unique surface morphology and the synergistic effects between the copper nanostructure and the GC layer. Lastly, a detailed reduction pathway mechanism for the catalytic reduction of 4-nitrophenol and nitrobenzene has been proposed.

Enhanced photocatalytic activity at multidimensional interface of 1D-Bi2S3@2D-GO/3D-BiOI ternary nanocomposites for tetracycline degradation under visible-light

Structural dimensionality and surface morphology are key properties that greatly affect the functionalities of materials. Herein, we report a synthesis of dimensionally coupled ternary nanocomposites from three-dimensional (3D) bismuth oxyiodide (BiOI), two-dimensional (2D) graphene oxide (GO), and one-dimensional (1D) bismuth sulfide (Bi₂S₃) nanomaterials for tetracycline degradation under visible-light irradiation. The 2%-Bi₂S₃@1%-GO/BiOI ternary nanocomposites show higher degradation efficiency than neat 3D-BiOI. The coupling of neat 1D-Bi₂S₃ with the 1%-GO/BiOI binary nanocomposite does not increase the specific surface area of the resulting 2%-Bi₂S₃@1%-GO/3D-BiOI ternary nanocomposite, but enhances notably its charge carrier separation and migration, according to the analysis of the higher photocurrent, smaller arc radius of the electrochemical impedance spectroscopy and lower photoluminescence intensity. The observed results suggest that the combination of dimensionally coupled composites provides a synergistic effect through an efficient charge transfer process. This work offers new insights into the design and construction of dimensionally coupled ternary nanocomposites for environmental remediation applications.

A facile synthesis of nano AgBr attached potato-like Ag2MoO4 composite as highly visible-light active photocatalyst for purification of industrial waste-water

In recent times, silver (Ag) based semiconductors have been gained a lot of attention as photocatalysts for industrial waste-water treatment owing to their strong visible-light absorbing capability and small bandgap energy. Therefore, herein, we have designed and utilized a one-pot hydrothermal approach to the synthesis of nano-sized AgBr covered potato-like Ag₂MoO₄ composite photocatalysts for the elimination of organic wastes from the aquatic environment. To achieve a high-performance photocatalyst, a sequence of AgBr/Ag₂MoO₄ composites were acquired with varying CTAB from 1 to 4 mmol. Furthermore, the photocatalytic activity of these photocatalysts was confirmed from decomposing of Rhodamine B (RhB) dye via visible-light elucidation. It can be noticed that AgBr/Ag₂MoO₄ composites exhibited significantly increased photocatalytic behaviour as compared with pure AgBr and Ag₂MoO₄. Surprisingly, the AgBr/Ag₂MoO₄ composite obtained from 2 mmol CTAB was eliminated the entire RhB dye with 25 min. Also, the recycling experiment indicates the AgBr/Ag₂MoO₄ composite has an excellent photo-stability. Accordingly, the as-acquired AgBr/Ag₂MoO₄ composite would be a suitable photocatalytic material for industrial waste-water purification.

In situ construction of a direct Z-scheme AgBr/α-Ag2WO4 heterojunction with promoted spatial charge migration and photocatalytic performance

A hierarchical AgBr/α-Ag₂WO₄ Z-scheme heterojunction was facially constructed for greatly improved photocatalytic activity towards pollutant elimination due to promoted spatial separation of carriers with high redox capacity.

Photocatalytic Degradation of the Light Sensitive Organic Dyes: Methylene Blue and Rose Bengal by Using Urea Derived g-C3N4/ZnO Nanocomposites

In this study, we report the fabrication of graphitic carbon nitride doped zinc oxide nanocomposites, g-C3N4/ZnO, (Zn-Us) by using different amount of urea. They were further characterized by X-ray Diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Raman, UV-vis, Scanning electron microscopy (SEM), and Transmission electron microscopy (TEM) techniques. The prepared nanocomposites were used as photocatalysts for the mineralization of the light sensitive dyes Methylene Blue (MB) and Rose Bengal (RB) under UV light irradiation, and corresponding photo-mechanism was proposed. Benefiting from these photocatalytic characteristics, urea derived g-C3N4/ZnO photocatalysts have been found to have excellent photodegradation activity against the MB and RB for 6 h and 4 h, respectively. Under the given experimental conditions, the degradation percentage of fabricated Zn-Us were shown ~90% for both model dyes. Compared to cationic MB dye, anionic RB dye is more actively degraded on the surface of prepared photocatalysts. The results obtained can be effectively used for future practical applications in wastewater treatment