Carbon quantum dots modified and Y3+ doped Ni3(NO3)2(OH)4 nanospheres with excellent battery-like supercapacitor performance

Supercapacitor is an important energy storage device widely used in the automobile industry, military production, and communication equipment because of its fast charge-discharge rate, and high power density. Herein, carbon quantum dots modified and Y3+ doped Ni3(NO3)2(OH)4 (NiY@CQDs) nanospheres are prepared by a solvothermal method and used as an electrode material. The electrochemical properties of NiY@CQDs were measured in a three-electrode system. An asymmetric supercapacitor (ASC) cell was assembled with activated carbon (AC) as the anode and NiY@CQDs as the cathode. The electrochemical properties of the ASC device were measured in a two-electrode system. Experimental results show the shape of NiY@CQDs is petal-shaped and the introducing carbon quantum dots and doping Y3+ significantly increases the specific surface area, conductivity, and specific capacitance of Ni3(NO3)2(OH)4. The mass-specific capacitance of NiY@CQDs reaches up to 2944 F g-1 at a current density of 1 A g-1. The asymmetric supercapacitor of NiY@CQDs//AC has a high energy density of 138.65 Wh kg-1 at a power density of 1500 W kg-1, displaying a wide range of application prospects in the energy storage area.

Controlled solvothermal synthesis of self-assembled SrTiO3 microstructures for expeditious solar-driven photocatalysis dye effluents degradation

In this work, the self-assembled SrTiO3 (STO) microstructures were synthesized via a facile one-step solvothermal method. As the solvothermal temperature increased from 140 °C to 200 °C, the STO changed from a flower-like architecture to finally an irregularly aggregated flake-like morphology. The photocatalytic performance of as-synthesized samples was assessed through the degradation of rhodamine B (RhB) and malachite green (MG) under simulated solar irradiation. The results indicated that the photocatalytic performance of STO samples depended on their morphology, in which the hierarchical flower-like STO synthesized at 160 °C demonstrated the highest photoactivities. The photocatalytic enhancement of STO-160 was benefited from its large surface area and mesoporous configuration, hence facilitating the presence of more reactive species and accelerating the charge separation. Moreover, the real-world practicality of STO-160 photocatalysis was examined via the real printed ink wastewater-containing RhB and MG treatment. The phytotoxicity analyses demonstrated that the photocatalytically treated wastewater increased the germination of mung bean seeds, and the good reusability of synthesized STO-160 in photodegradation reaction also promoted its application in practical scenarios. This work highlights the promising potential of tailored STO microstructures for effective environmental remediation applications.

Synthesis and characterization of TiO2-carbon filter materials for water decontamination by adsorption-degradation processes

Wastewater treatment is becoming ever more challenging due to the increasing levels of molecular pollutants that are challenging for existing approaches. Innovative materials are required to help produce potable water from heavily contaminated water sources. One such material is titanium dioxide-activated carbon (TiO2/AC) heterostructures, which combine the photocatalytic properties of TiO2 with the adsorption properties of the ACs. To date, studies on TiO2/AC heterostructures for real-world water purification have yet to be performed. This study aimed to address this gap by comparing the effectiveness of titanium isopropoxide (Ti(OiPr)4) and titanium butoxide (Ti(OBu)4) for synthesizing TiO2/AC heterostructures using four different methods (sol-gel, solvothermal, and microwave-assisted hydrothermal methods [x2]). The elaborated heterostructures were compared with commercial TiO2 materials for their ability to degrade five emerging contaminants (caffeine, hydrochlorothiazide, saccharin, sulfamethoxazole, and sucralose). Hydrochlorothiazide and sulfamethoxazole were demonstrated to be rapidly degraded by UV-C irradiation within 15 min. Caffeine, saccharin, and sucralose were less susceptible to UV degradation. All the elaborated TiO2/AC heterostructures consisted of pure anatase phase, with Ti(OBu)4 syntheses generating larger average crystal sizes and lower surface areas. Sol-gel preparations produced the most effective TiO2/AC heterostructures due to their high surface area. Compared with the commercial TiO2, the heterostructures enhanced the photocatalytic activity of TiO2 by up to 10.0 times. Also, the heterostructures remained effective at environmentally relevant conditions (i.e., concentration of the contaminant and water matrices). The reuse of the materials was tested and showed no reduction in efficiency after four removal/regeneration cycles. Overall, this study presents novel TiO2/AC heterostructures with increased photocatalytic efficiency that can serve as an efficient material for removing contaminants at large scales (e.g., water treatment plants).

An efficient electrochemical degradation of toxic pollutants in wastewater using BiOBr/BiVO4 hierarchical structured electrode material

The electrochemical degradation of alizarin red dye was studied using bismuth oxyhalide attached to bismuth vanadate nanocomposite synthesized via a simple solvothermal method. The electrochemical degradation of alizarin red dye was treated at current densities of 3 and 5 mA cm-1 for 30 min under different supporting electrolyte mediums (NaCl and KCl). Also, the electrochemical degradation of BiOBr/BiVO4 electrode shows higher degradation percentages of 97 and 99 for NaCl and KCl electrolyte solutions, which are higher degradation percentages than pure BiVO4 electrode (88 and 91 for NaCl and KCl). Also, the BiOBr/BiVO4 electrode shows 100% COD reduction during the 30th min of alizarin red dye using both NaCl and KCl electrolyte solutions. This may indicate that the prepared BiOBr/BiVO4 electrode shows an efficient electrode material for the degradation of textile dyes.

Multinary nanocomposite of GO@SrO@CoCrO3@FeCr2O4@SnO2@SiO2 for superior electrochemical performance and water purification applications

Novel multinary nanocomposite using solvothermal method synthesized and studied for their use in supercapacitors and photocatalysis to degrade pollutants using characterization techniques XRD, SEM, EDX, FTIR, Raman, UV-Vis, Zeta potential and photoluminescence spectroscopy whereas electrochemical testing via EIS, CV and GCD analysis. Average crystalline size of 20.81 nm measured from XRD whereas EDX confirms GO suppression within nanocomposite. Mixed matrix like morphology is observable from SEM micrographs. The composite exhibited a band gap of 2.78 eV that could degrade MB dye at 94 % under direct sunlight consistent with first-order kinetics. Multiple distinctive peaks in FTIR spectra indicates various functional groups exsistence in the material alongwith zeta potential value of -17.9 mV. Raman spectra reveals D-band shifting to value 1361 cm-1 while the G-band shifts to 1598 cm-1 relative to GO. Furthermore electrochemical performance evaluated revealing electron transfer rate value 4.88 × 10-9 cms-1 with maximum capacitance about 7182 Fg-1 at a scan rate of 10 mVs-1 respectively. Power density ranges from 3591.18 to 2163 W/kg and energy density from 299 to 120 Wh/Kg as measured from GCD analysis. These findings indicates that novel multinary nanocomposite holds potential as an electrode material in supercapacitors and as a sunlight-driven photocatalyst for the degradation of water-borne organic pollutants.

Beyond Solvothermal: Alternative Synthetic Methods for Covalent Organic Frameworks

Covalent organic frameworks (COFs) are crystalline porous organic materials that hold a wealth of potential applications across various fields. The development of COFs, however, is significantly impeded by the dearth of efficient synthetic methods. The traditional solvothermal approach, while prevalent, is fraught with challenges such as complicated processes, excessive energy consumption, long reaction times, and limited scalability, rendering it unsuitable for practical applications. The quest for simpler, quicker, more energy-efficient, and environmentally benign synthetic strategies is thus paramount for bridging the gap between academic COF chemistry and industrial application. This Review provides an overview of the recent advances in alternative COF synthetic methods, with a particular emphasis on energy input. We discuss representative examples of COF synthesis facilitated by microwave, ultrasound, mechanic force, light, plasma, electric field, and electron beam. Perspectives on the advantages and limitations of these methods against the traditional solvothermal approach are highlighted.

Development of a Novel Sulfur Quantum Dots: Synthesis, 99mTc Radiolabeling, and Biodistribution

Sulfur quantum dots (SQDs) as free heavy metal element quantum dots have promising applications in diagnosis and therapy; however, SQDs' in vivo biodistribution has not been studied. In the current study, SQDs were synthesized directly from cheap sublimated sulfur powder via a one-pot solvothermal method, and sucrose was used as a stabilizer to enhance stability and biocompatibility. The as-obtained SQDs with an average size of 4.6 nm exhibited great water dispersity, highly favorable quantum yield (21.5%), and uniformly spherical shape which were confirmed by UV-Vis, fluorescence spectrophotometer, TEM, and FESEM/EDX/PSA analyses. Moreover, the as-synthesized SQDs had very low cytotoxicity based on cancer (C26) and normal (L929) cell lines via MTT assay. And also, SQDs were radio-labeled directly by Technetium-99m (99mTc), which had good stability ranging from 86 to 99% in PBS and human serum. The SQDs' cell uptake on C26 and L929 cell lines demonstrated that cancer cells had more uptake than normal cells by increasing concentrations. Moreover, SQDs' in vivo biodistribution results displayed high kidney dose accumulation and rapid renal clearance, making them suitable for imaging and therapeutic applications.

Remediation and recovery of Kariba weed as emerging contaminant in freshwater and shellfish aquaculture system via solvothermal liquefaction

Fast growing Kariba weed causes major problems and pollution on freshwater and shellfish aquaculture systems by interfering with nutrient uptake of crops, restricting sunlight penetration, and decreasing water quality due to massive biomass of Kariba weed remnants. Solvothermal liquefaction is considered an emerging thermochemical technique to convert waste into high yield of value-added products. Solvothermal liquefaction (STL) of Kariba weed as an emerging contaminant was performed to investigate the effects of different types of solvents (ethanol and methanol) and Kariba weed mass loadings (2.5-10 % w/v) on treating and reducing the weed via conversion into potentially useful crude oil product and char. Up to 92.53 % of Kariba weed has been reduced via this technique. The optimal conditions for crude oil production were found to be at 5 % w/v of mass loading in methanol medium, resulting in a high heating value (HHV) of 34.66 MJ/kg and yield of 20.86 wt%, whereas the biochar production was found to be optimum at 7.5 % w/v of mass loading in methanol medium, resulting in 29.92 MJ/kg of HHV and 25.38 wt% of yield. The crude oil consisted of beneficial chemical compounds for biofuel production such as hexadecanoic acid, methyl ester (65.02 peak area %) and the biochar showed high carbon content (72.83 %). In conclusion, STL as a remediation for emerging Kariba weed is a feasible process for shellfish aquaculture waste treatment and biofuels production.

Ethylenediamine-assisted solvothermal synthesis of ZnS/ZnO photocatalytic heterojunction for high-efficiency hydrogen production

Organic-inorganic hybrid materials have emerged as a class of novel materials over the last two decades, as they combine functional organic components and inorganic building blocks into unique materials through various chemical or physical interactions. In the present work, the importance of the use of ethylenediamine in sulfided materials applied to photocatalytic processes in the H2 production is demonstrated. The ZnS/ZnO heterojunction was prepared by the solvothermal synthesis in the presence and absence of ethylenediamine. The photocatalytic behavior showed that the addition of ethylenediamine increases the photocatalytic efficiency up to eight times compared to the photocatalyst without the organic agent. The materials were characterized by X-ray diffraction, scanning electron microscopy, infrared and UV-visible spectroscopies of solids, N2 adsorption-desorption isotherms, X-ray photoelectron spectroscopy, and photoelectrochemical characterization. The ethylenediamine plays a double role: to stabilize the cubic phase of zinc sulfide and to act as a promoter molecule of charge transfer on the surface of ZnS/ZnO/en heterojunction, slowing down the rate of recombination of the electron-hole pair, which is reflected in a decrease in the resistance to transfer of charge carriers, improving the H2 production rate until 1564 µmol h-1 g-1.

Synthesis, Structure and Near Infrared Fluorescence Property of a New Nd-MOF Based on a Triangular Benzylamine Ligand

A new 3D metal-organic framework (Nd-MOF) {[Nd₂L₂]·2NH₂(CH₃)₂·3H₂O} was successfully established via a solvothermal method with Nd³⁺ ion and 5-(bis(4-carboxybenzyl) amino)-isophthalicacid (H₄L), and has also been characterized by X-ray diffraction, powder X-ray diffraction (PXRD), IR and photoluminescence(PL)spectrum. The neodymium ions are free of coordinated solvents, and the Nd-MOF exhibits strong near-infrared (NIR) fluorescence. Besides, Its NIR fluorescence property shows low temperature resistance, which is favorable for being used in the low temperature environment. Besides, the fluorescence lifetime of Nd-MOF is 6.03 μs, and the quantum yield is 1.2%. The small quantum yield may owe to large energy gap between the T1 of the ligand H₄L and the resonance energy level ⁴F_3/2 of the Nd³⁺ ion, or due to large crystal size of the Nd-MOF.

Highly effective and stable MWCNT/WO3 nanocatalyst for ammonia gas sensing, photodegradation of ciprofloxacin and peroxidase mimic activity

The present study discusses the ammonia (NH₃) sensing characteristics, photocatalytic degradation of emerging pollutants, and peroxidase mimic activity of multifunctional multi-walled carbon nanotube-tungsten oxide nanocomposite (MWCNT/WO₃) prepared by conventional solvothermal method. The prepared MWCNT/WO₃ nanocomposites were characterized by various analytical techniques like XRD, Raman, XPS, N₂ adsorption, FESEM with elemental analysis and diffuse reflection spectroscopy. The prepared 1% MWCNT/WO₃ nanocomposite showed better gas sensing performance for the NH₃ vapors at 10-100 ppm than the pristine WO₃ and the response and recover time of about 13 and 15s towards 20 ppm of ammonia (NH₃) was achieved. The photocatalytic activity of MWCNT/WO₃ towards organic dyes such as Rhodamine-B (Rh.B) methylene blue (MB) and pharmaceutical compound ciprofloxacin (CIP) were studied and achieved above 90% degradation at 160 min for CIP and 60 min for MB and Rho-B respectively. The radicle scavenging activity for MWCNT/WO₃ nanocomposite showed the predominant formation of hydroxyl (OH^•) and superoxide radicle (^•O^2-). Further, the MWCNT/WO₃ nanocomposite showed peroxidase mimic activity and exhibit the limit of detection (LOD) of about 321 nM. From the overall analysis, MWCNT/WO₃ hybrid seems to have potential characteristics that can be explored for multiple functional applications.

Ultrasensitive and highly selective "turn-on" fluorescent sensor for the detection and measurement of melatonin in juice samples

Melatonin (MLT), a hormone related to the regulation of brain functions, is directly related to sleep quality and is considered to be a possible adjuvant therapy for patients needing hospitalization for coronavirus disease 2019 pneumonia, and accurate measurement of MLT is crucial. Herein, a new, highly sensitive, and easy operation fluorescent probe was provided based on Zr metal-organic framework encapsulation into the molecularly imprinted polymer (MOF@MIP). By combining unique properties of MIP and fluorescent MOF, selectivity and operation of the applied method were significantly improved. Different characterization methods, such as XRD, FT-IR, and FE-SEM, were used to confirm the synthesis reliability. MOF@MIP was successfully used for the precise identification and ultrasensitive detection for trace amounts of MLT. The detection mechanism for the analytical system is based on the ''turn-on'' fluorescence (FL) signal in 404 nm. The findings proved that it is possible to detect trace amounts of MLT in real samples including grape, cherry, and sour cherry juice. The linear range and the limit of detection (LOD) for trace amounts of MLT were obtained as 1-100 ng/mL and 0.18 ng/mL, respectively.

Solvothermal synthesis of 3D hierarchical Cu2FeSnS4 microspheres for photocatalytic degradation of organic pollutants

In this work, we prepared Cu₂FeSnS₄ (CFTS) microspheres via solvothermal method and studied their photocatalytic performance towards the degradation of organic pollutants. With increasing solvothermal temperature from 160 °C to 180 °C, the morphology of CFTS changes from irregular 2D to hierarchical 3D shapes. Hierarchical 3D CFTS microspheres packed with 2D nanosheets were successfully prepared at 180 °C. During the solvothermal process, octadecyl amine (ODA) acts as a capping agent to prevent the aggregation of particles, while L-cystine functions as an environmentally friendly sulfur source and complexing reagent. The large surface area and mesoporous structure of the as-prepared 3D hierarchical CFTS microspheres provide more active sites, enhance visible light absorption and promote charge separation and transfer, leading to the improved photodegradation performance for RhB and MB compared to the samples prepared at the temperature lower than 180 °C. This work provides a simple and low-cost method for the synthesis of 3D hierarchical CFTS towards photocatalytic applications.

Photodegradation assessment of RB5 dye by utilizing WO3/TiO2 nanocomposite: a cytotoxicity study

Textile dyeing wastewater becomes one of the root causes of environmental pollution. Titanium dioxide (TiO₂) is one of the photocatalysts that shows prominent organic dye photodegradation ability. In this study, a porous tungsten oxide (WO₃)/TiO₂ composite was prepared through ultrasonic-assisted solvothermal technique with varying amounts of WO₃ ranging from 0.25 to 5 weight % (wt.%). The prepared 0.50 wt.% WO₃/TiO₂ (0.50WTi) composite exhibited the highest photodegradation activity (4.39 × 10^-2 min^-1) and complete mineralization in chemical oxygen demand (COD) reading towards 30 mg.L^-1 of Reactive Black 5 (RB5) dye under 60 min of light irradiation. Effects of large surface area, small crystallite size, high pore volume and size, and low electron-hole pair recombination rate attributed to the superiority of 0.50WTi. Besides, 0.50WTi could be reused, showing 86.50% of RB5 photodegradation at the fifth cycle. Scavenger study demonstrated that photogenerated hole (h⁺) was the main active species of 0.50WTi to initiate the RB5 photodegradation. Cytotoxicity assessment determined the readings of half-maximal inhibitory concentration (IC₅₀) were 1 mg.mL^-1 and 0.61 mg.mL^-1 (24 and 72 h of incubations) for the 0.50WTi composite.

Preparation of FeNi/C composite derived from metal-organic frameworks as high-efficiency microwave absorbers at ultrathin thickness

Developing metal-organic frameworks (MOFs) derived microwave absorbers with the merits of thin matching thickness, broad bandwidth and strong absorption still remains a big challenge in the electromagnetic absorption field. Herein, FeNi-MOFs derived magnetic-carbon composites were fabricated via a solvothermal and pyrolytic two-step strategy. It was found that the micromorphology of carbon frameworks could be regulated from the regular octahedron to spherical shape through facilely adjusting the molar ratios of Fe³⁺ to Ni²⁺ in the precursors. Furthermore, results revealed that the molar ratios of Fe³⁺ to Ni²⁺ had notable effects on the electromagnetic parameters and microwave attenuation capacity of attained composites. Significantly, the obtained FeNi/C composite with the molar ratio of Fe³⁺ to Ni²⁺ of 1:0.5 showed the comprehensively optimal electromagnetic attenuation performance, i.e. the reflection loss achieved -40.2 dB (larger than 99.99% absorption) and absorption frequency band was as high as 5.8 GHz (from 11.9 to 17.7 GHz, covering 96.7% of Ku-band) under an ultrathin thickness of 1.65 mm. Besides, the probable microwave dissipation mechanisms were clarified, which mainly derived from the optimized impedance matching, strengthened interfacial polarization and dipole polarization relaxation, enhanced conduction loss and natural resonance effect. Therefore, our results would be helpful for designing and developing high-performance microwave absorbing composites derived from MOFs.

Investigation of EG-Bi2S3 nanorods photocatalytic activity under visible light for dye degradation from aquatic system

Bi₂S₃, 5 ml EG-Bi₂S₃, and 10 ml EG-Bi₂S₃ were synthesized by employing solvothermal route. X-ray diffraction, UV-vis absorption, photoluminescence, Raman, scanning electron microscopic studies confirmed the structural, optical, morphological behaviors. The XRD pattern of Bi₂S₃, 5 ml EG-Bi₂S₃, and 10 ml EG-Bi₂S₃ was correlated well with JCPDS # 65-2435. The crystallite size was found to be 57, 49, and 40 nm. The photoluminescence spectra showed semiconducting property of prepared Bi₂S₃, 5 ml EG-Bi₂S₃, and 10 ml EG-Bi₂S₃. The absorption spectra of Bi₂S₃, 5 ml EG-Bi₂S₃, and 10 ml EG-Bi₂S₃ nanorods were well matched with the spectra of a previous report. The bandgap values of Bi₂S₃, 5 ml EG-Bi₂S₃, and 10 ml EG-Bi₂S₃ were calculated to be 1.56, 1.45, and 1.3 eV in reducing order. The morphology of Bi₂S₃, 5 ml EG-Bi₂S₃, and 10 ml EG-Bi₂S₃ samples showed the development of nanorods. The 10 ml EG-Bi₂S₃ sample showed better development of nanorods with the addition of ethylene glycol. The agglomeration was considerably reduced with the mixing of solvent. Bi₂S₃, 5 ml EG-Bi₂S₃, and 10 ml EG-Bi₂S₃ catalysts were added to the methylene blue dye solution and its photocatalytic properties were investigated by reducing toxic pollutants under light. The 10 ml EG-Bi₂S₃ sample with neutral pH and 0.1 g of catalyst was added and investigated which showed 86% of efficiency towards dye degradation. The narrow bandgap, defined morphology of 10 ml EG-Bi₂S₃, made a positive result towards efficient photocatalytic activity.

A Co-Crystallised Cobalt(II) Cluster of Pyridinedicarboxylic Acid (PDC) as a Luminescent Material for Selective Sensing of Methanol

A luminescent Cobalt(II) co-crystal [Co₁₃(PDC)₁₆(H₂O)₂₄.7H₂O] 1 (where H₂PDC = 2,6-pyridinedicarboxylic acid) have been prepared by oven-heating and slow evaporation of solvent. Single crystal X-ray diffraction (SCXRD) analysis revealed that 1 is a mixture of complexes that crystallizes in the triclinic space group P-1 and the geometry around the Co(II) ions is octahedral. The structure is extensively imbued with hydrogen bonding that helps in stabilizing the complex. Thermogravimetric analysis indicates that 1 is thermally stable up to 364 ^οC. The luminescence properties of 1 revealed a strong emission centered at 437 nm (λex = 345 nm) assigned to ligand to metal charge transfer (LMCT). The luminescence sensing of 1 towards volatile organic molecules were also examined. However, 1 displayed a turn off towards methanol compared to other molecules with high quenching efficiency and low limit of detection (3.5 × 10^-4 vol%). The results show excellent selectively and high sensitivity. Powder X-ray diffraction studies revealed that the structural integrity of the complex was maintained after exposure to methanol vapour. Theoretical studies also revealed small binding energy (-413.2 au) and low energy gap (1.19) for 1-CH₃OH adduct.

Defect enrich ultrathin TiO2 nanosheets for rapid adsorption and visible light mediated PPCPs degradation

Recently, PPCPs have attracted extensive attention as emerging pollutants. Due to the strong hydrophilicity and small molecular weight, PPCPs are difficult to be fully removed by adsorption and other processes, posing a serious threat to the ecological environment. Here, we demonstrate solvothermal synthesis of defect enrich TiO₂ nanosheets through simple copper doping. Novel TiO₂ nanosheets were found to be mesoporous with high specific surface area and exhibited excellent visible light response. Performance of the developed TiO₂ nanosheets were evaluated towards photocatalytic degradation of two model pollutants, tetracycline and acetaminophen. Results showed robust degradation of tetracycline and acetaminophen under visible-light irradiation within 100 min. Meanwhile, the potential relationship between the structural characteristics and excellent ability of the catalyst was discussed, as well as probable mechanism. Additionally, a study on the toxicity of tetracycline solution to human skin epidermal cells showed that the toxicity of the treated solution to cells is greatly reduced. The prepared catalysts show good repeatability (a slightly decrease ca.3% after 5 cycles) and applicability, providing a reasonable design for water remediation.

Photocatalytic degradation of crystal violet dye under sunlight by chitosan-encapsulated ternary metal selenide microspheres

Organic dyes that are extensively released in wastewater from various industries remain the priority concern in the modern world. Therefore, a novel catalyst, bismuth-iron selenide, was prepared through the solvothermal process for photocatalytic degradation of a carcinogenic crystal violet dye. The catalyst was supported with chitosan to form iron-bismuth selenide-chitosan microspheres (BISe-CM). The synthesized catalyst was composed of iron, bismuth, and selenium in a definite proportion based on EDX analysis. FTIR analysis confirmed the synthesis of BISe-CM from characteristic bands of metal selenium bond as well as the typical bands of chitosan. SEM analysis illustrated the average diameter of the barren catalyst to be 54.8 nm, while the average size of the microspheres was 982.5 um. The BISe-CM has the surface of a pore with an average size of 0.5 um. XRD analysis revealed that the synthesized catalyst was composed of Fe₃Se₄ and Bi₂Se₃. The prepared catalyst showed better degradation efficiency for crystal violet dye at optimized conditions under solar irradiation. Employing 0.2 g of BISe-CM resulted in complete degradation for 30 ppm of crystal violet dye in 150 min at pH 8.0. The reusability of the catalyst up to four consecutive times makes it a more attractive and practical candidate. Moreover, the catalyst followed pseudo-first-order kinetics in the decontamination of crystal violet. Conclusively, the novel photocatalyst showed the best decolorizing property of crystal violet under sunlight irradiation and could be a suitable alternative for dye decontamination from wastewater.

Fabrication and high photoelectrocatalytic activity of scaly BiOBr nanosheet arrays

Bismuth oxybromide (BiOBr) nanosheet arrays (NSAs) were successfully prepared on the surface of indium tin oxide glass (hydrophilic pretreated) by solvothermal method using [C₁₆mim]Br ionic liquid as bromine source and template. The effects of different reaction temperatures on array synthesis were investigated. BiOBr NSA-160 (NSAs prepared at 160 °C for 8 h) had the best photoelectrocatalytic (PEC) activity. The removal rate of ciprofloxacin hydrochloride by BiOBr NSA-160 was 91.4% by applying a bias voltage of 0.9 V and irradiating under visible light for 180 min. Results of the analyses of the morphology, photoelectric properties, energy band structure, and degradation active species show that BiOBr NSA-160 is a p-type photocatalyst with a thickness of approximately 500 nm, a light response range of less than 440 nm, and photocurrent density of 69 μA/cm² at the optimal bias voltage is 0.9 V. The high PEC activity of BiOBr NSA-160 was deduced from two aspects: one is that the bias potential effectively improves the separation efficiency of photogenerated carrier, and the other is that the structure of the nanoarray increases light absorption and active sites. BiOBr NSAs are promising PEC material for application in pollutant removal.

Esterification modified starch by phosphates and urea via alcohol solvothermal route for its potential utilization for urea slow-releasing

The natural starch (NS) is modified by an esterification process which is accomplished by reacting the NS and phosphate together with urea via a facile alcohol solvothermal method. After modification, a series of obvious variations can be easily confirmed for the resulted starch phosphate carbamides (denoted as SPC) compared with that of NS, such as the introduction of new groups of CO, PO, P-O-C and P-O-H together with new elements of N and P in starch molecular structure unit confirmed in FT-IR and XPS analyses and the decreased crystallinity along with formed surface defect demonstrated in XRD and SEM measurements. Furthermore, the formed SPC has a higher viscosity of 480 mPa.s^-1 and lower gelatinization temperature of under 10 °C than that of the NS. More importantly, when the SPC is utilized as outer coating material together with ethylcellulose (EC) as inner coating material for preparing double-layer slow-release urea (denoted as EC/SPC based SRU), the EC/SPC based SRU has a desirable slow-release behavior with release percentages of 40.9% for 12 h in water and merely 59.6% for 20 day together with even exceeding 30 days in soil. Conclusively, this work provides a facile preparation approach for the SPC and its creative application for the preparation of SRU.

Tailoring NiCoAl layered double hydroxide nanosheets for assembly of high-performance asymmetric supercapacitors

NiCoAl layered double hydroxide nanosheets (NiCoAl-LDHNs) were prepared by a one-step solvothermal method. The shape and size of the obtained nanosheets are optimized by adjusting the solvothermal time and the molar concentration ratio of Ni²⁺/Co²⁺ to obtain the electrode material with the best performance. When the solvothermal time is 9 h and the molar concentration ratio of Ni²⁺/Co²⁺ is 1:1, NiCoAl-LDHNs has the best morphology and electrochemical performance. When assembled into a supercapacitor, NiCoAl-LDHN-9 has a high specific capacitance of 1228.5 F g^-1 at 1 A g^-1. As the current density is increased to 20 A g^-1, the specific capacitance is 1001.8 F g^-1, which still has a high capacitance retention of 81.6%. When NiCoAl-LDHN-9 was assembled into an asymmetric supercapacitor, NiCoAl-LDHN-9//AC has a specific capacitance of 102.1 F g^-1 at 0.5 A g^-1. The asymmetric supercapacitor devices also show excellent electrochemical performance in terms of energy density (35.9 Wh kg^-1 at 225.8 W kg^-1), power density (4.8 kW kg^-1 at 22.2 Wh kg^-1) and cycle life (capacitance retention rate after 10,000 cycles is 87.1%). Those results indicate that NiCoAl-LDHN have the potential to be promising electrode materials for high performance supercapacitors.

Morphological variations in Bi2S3 nanoparticles synthesized by using a single source precursor

A simple solvothermal decomposition of bismuth dithiocarbamate complex in oleylamine, oleic acid, and hexadecylamine at 180 °C, yielded bismuth sulphide nanomaterials of different morphologies represented as Bi₂S₃(OAm), Bi₂S₃(OAc) and Bi₂S₃(HDA) respectively. The bismuth complex, used as the single source precursor, was synthesized and characterised by elemental analysis, FTIR, and NMR spectroscopic techniques. The spectroscopic and micro analysis confirmed the proposed compound, while the as-prepared nanoparticles were characterized using UV-visible spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive spectrometer (EDS). The effects of the different solvent media on the structural properties of the obtained Bi₂S₃ were investigated. An orthorhombic phase bismuthinite of varying intensities were obtained, with an indication that a bias of orientations existed in the (2 1 1) crystallographic planes in the Bi₂S₃(OAm) compared to the characteristic (1 3 0) diffraction peak of Bi₂S₃. The microscopic analysis showed a correlation between the nanoparticles' morphology and the type of solvent used, which also implied that the properties of Bi₂S₃ were affected by the solvent medium.

Fluorescence "Off-On" Probe for L-Cysteine Detection Based on Nitrogen Doped Carbon Dots

Herein, a simple and efficient fluorescence analysis method for L-Cysteine (L-Cys) was established. The method was based on the fluorescent "off-on" mode of nitrogen doped carbon dots (NCDs). The NCDs were prepared via a facile one-step solvothermal method. In the process of exploring the bio-functional application of these newly synthesized NCDs, we found these NCDs with rich functional groups exhibited excellent optical properties. In addition, these newly synthesized NCDs showed an excitation-dependent emissions photolumine-scent (PL) property and exhibited good performance in the detection of Fe³⁺ ions by quenching the blue emission fluorescence. Interestingly, the quenched fluorescence of NCDs was recovered with the addition of L-Cys, which provided a novel approach for L-Cys detection. The NCDs-based fluorescent "off-on" sensor has a wide linear detection range (0-100 μM), and a relatively low detection limits (0.35 μM) for L-Cys. This simple fluorescent "off-on" approach is, very sensitive and selective for L-Cys detection, which also provides a new insight on NCDs biosensor application.

Organosilane-functionalized carbon quantum dots and their applications to "on-off-on" fluorometric determination of chromate and ascorbic acid, and in white light-emitting devices

Organosilane-functionalized carbon quantum dots (Si-CQDs) were synthesized by reacting glucosamine and 3-[2-(2-aminoethylamino)ethylamino]propyl-trimethoxysilane in acetone. The surface morphology, crystal structure, functional groups, elemental composition, and optical properties of the Si-CQDs were characterized using TEM (HRTEM), XRD, FT-IR, XPS, UV-vis absorption and fluorescence spectroscopy. They show that N-containing groups including C=N and C-N, and Si-containing groups including Si-O-C and Si-O-Si have been formed on the surface of Si-CQDs. The element doping and surface functionalization of Si-CQDs endow their novel chemical, physical and optical properties. The Si-CQDs dispersed in acetone are almost monodisperse with an average particle diameter of 3.6 nm. The Si-CQDs dispersed in acetone display blue fluorescence (excitation/emission maxima of 380/460 nm). In contrast, the solid-state Si-CQDs exhibited yellow fluorescence (with excitation/emission maxima of 470/595 nm). The fluorescence emission spectra of acetone-suspended Si-CQDs are concentration-dependent, and the emission peak becomes red-shifted as the concentration is increased. The Si-CQDs are sensitive and selective fluorescent "on off on" nanoprobes for chromate [Cr(VI)] and ascorbic acid (AA). Fluorescence is quenched by Cr(VI) via an inner filter effect from the absorption of Si-CQDs excitation at 380 nm by Cr(VI). Upon addition of AA, fluorescence is restored because of reduction of Cr(VI) by AA. Under optimal conditions (excitation/emission wavelength of 380/460 nm), the response is linear in the 0.4-160 μM Cr(VI) concentration range, and the detection limit is 34 nM. The respective data for AA are 1-80 μM and 84.6 nM. The practical use of the nanoprobe for Cr(VI) determination in real river water samples is also demonstrated successfully. Their concentration-dependent fluorescence, good thermal stability and self-crosslinking behavior also make the Si-CQDs a candidate material for white light-emitting diodes that displays color conversion and can act as an encapsulation layer in a blue light-emitting diode (LED) chip. Graphical abstract One-pot solvothermal synthesis of organosilane-functionalized carbon quantum dots (Si-CQDs) with blue fluorescence in solution, yellow fluorescence in solid state and concentration-dependent fluorescence property, and their applications for chromate (Cr(VI)) and ascorbic acid dual determinations and white light-emitting device. Graphical Abstract contains poor quality and small text inside the artwork. Please do not re-use the file that we have rejected or attempt to increase its resolution and re-save. It is originally poor, therefore, increasing the resolution will not solve the quality problem. We suggest that you provide us the original format. We prefer replacement figures containing vector/editable objects rather than embedded images. Preferred file formats are eps, ai, tiff and pdf.We have changed the poor quality graphical abstract into the jpg and pdf.

Hydrothermal/solvothermal synthesis and treatment of TiO2 for photocatalytic degradation of air pollutants: Preparation, characterization, properties, and performance

Photocatalytic oxidation (PCO) is a well-known technology for air purification and has been extensively studied for removal of many air pollutants. Titanium dioxide (TiO₂) is the most investigated photocatalyst in the field of environmental remediation owed to its chemical stability, non-toxicity, and suitable positions of valence and conduction bands. Various preparation techniques including sol-gel, flame hydrolysis, water-in-oil microemulsion, chemical vapour deposition, solvothermal, and hydrothermal have been employed to obtain TiO₂ materials. Hydro-/Solvothermal (HST) synthesis, focus of the present work, can be defined as a preparation method in which crystal growth occurs in a solvent at relatively low temperature (<200 °C) and above atmospheric pressure. This paper aims to provide a comprehensive and critical review of current knowledge regarding the application of HST synthesis for fabrication of TiO₂ nanostructures for indoor air purification. TiO₂ nanostructures are categorized from the morphological standpoint (e.g. nanoparticles, nanotubes, nanosheets, and hierarchically porous) and discussed in detail. The influence of preparation parameters including hydrothermal time, temperature, pH of the reaction medium, solvent, and calcination temperature on physical, chemical, and optical properties of TiO₂ is reviewed. Considering the complex interplay among catalyst properties, a special emphasis is placed on elucidating the interconnection between various photocatalyst features and their impacts on photocatalytic activity.

Synthesis, transfer, and characterization of core-shell gold-coated magnetic nanoparticles

Magnetic separation has gained new popularity as a versatile partitioning method with the recent growth in nanotechnology and related biotechnology applications. In this study, iron oxide magnetic nanoparticles were synthesized via solvothermal methods and directly coated with gold to form core-shell gold-coated magnetic nanoparticles (Fe₃O₄-AuNPs). High-resolution transmission electron microscopy with Energy dispersive X-ray spectroscopy results suggests that temperature and reaction time play an important role in the formation of small, monodisperse Fe₃O₄-AuNPs. We also demonstrate that increased 4- dimethyl(amino)pyridine (DMAP) concentrations and vigorous stirring were required to successfully transfer Fe₃O₄-AuNPs into aqueous solution. The structure and morphology of the synthesized and transferred Fe₃O₄-AuNPs was further confirmed by UV–vis absorption spectroscopy and solubility experiments.

•

Direct coating of Fe₃O₄ with Au: Slowly heating by (10 °C/ min) until 180–190 °C without exceeding this reaction temperature and increasing the reaction time to 3 h from 1.5 h

•

High yield transfer of Fe₃O₄-AuNPs was achieved using 4- dimethyl(amino)pyridine (DMAP) as phase transfer catalyst

One-Step Synthesis of Silver Nanowires with Ultra-Long Length and Thin Diameter to Make Flexible Transparent Conductive Films

High aspect ratio silver nanowires (AgNWs) with ultra-long length and thin diameter were synthesized through bromine ion (Br⁻)-assisted one-step synthesis method. The bromine ions were used as pivotal passivating agent. When the molar ratio of Br⁻/Cl⁻ was 1:4, the average diameter of AgNWs was as low as ~40 nm, the average length was as high as ~120 μm, and the aspect ratio reached 2500. Networks of AgNWs were fabricated using as-prepared high-quality AgNWs as conducting material and hydroxyethyl cellulose (HEC) as the adhesive polymer. As a result, a low sheet resistance down to ~3.5 Ω sq⁻¹ was achieved with a concomitant transmittance of 88.20% and a haze of 4.12%. The ultra-low sheet resistance of conductive film was attributed to the long and thin AgNWs being able to form a more effective network. The adhesion of the AgNWs to the substrate was 0/5B (ISO/ASTM). The insights given in this paper provide the key guidelines for bromine ion-assisted synthesis of long and thin AgNWs, and further designing low-resistance AgNW-based conductive film for optoelectronic devices.

Facile Synthesis of Heterostructured WS2/Bi2MoO6 as High-Performance Visible-Light-Driven Photocatalysts

In this paper, novel WS₂/Bi₂MoO₆ heterostructured photocatalysts were successfully fabricated via a facile solvothermal growth method using pre-exfoliated layered WS₂ nanoslices as a substrate. The structure, morphology, and optical properties of the as-prepared WS₂/Bi₂MoO₆ samples were characterized by XRD, XPS, SEM, TEM (HRTEM), and UV-vis diffuse reflectance spectra (DRS). Results confirmed the existence of an excellent nanojunction interface between layered WS₂ nanoslices and Bi₂MoO₆ nanoflakes. Under visible light (>420 nm), the WS₂/Bi₂MoO₆ composites exhibit significantly enhanced photocatalytic activity compared with pure Bi₂MoO₆ toward the decomposition of rhodamine B (RhB). Meanwhile, the active species trapping experiments indicated that holes (h⁺) were the main active species during the photocatalytic reaction. The enhanced photocatalytic performance can be ascribed to the effective light harvesting, fast photogenerated electron-hole pairs separation, and excellent charge carrier transport of the WS₂/Bi₂MoO₆ heterostructures. Moreover, the prepared WS₂/Bi₂MoO₆ composites also show good structural and activity stability in repeatability experiments.

Controllable synthesis and luminescent properties of rare earth doped Gd2(MoO4)3 nanoplates

For the first time, we have successfully synthesized rare-earth doped Gd₂(MoO₄)₃: RE³⁺ (RE=Eu, Tb) nanoplates by solvothermal method. The morphology of Gd₂(MoO₄)₃ can be manipulated by changing the reaction times and reaction temperatures. The composition and surface morphology have been investigated by X-ray powder diffraction (XRD) and transmission electron microscopy (TEM), respectively. Under the excitation of UV, Photoluminescence (PL) has been used to explore the excellent luminescence properties of the synthesized nanophosphors. The Gd₂(MoO₄)₃: Eu³⁺ phosphors shows a hypersensitive red emission (612nm) when excitation wavelength within the scope of 200-350nm corresponding to a ⁵D₀-⁷F₂ transition. Similarly, the Gd₂(MoO₄)₃: Tb³⁺ phosphors certificate a highly strong green emission at 544nm at an excitation wavelength of 298nm corresponding to a ⁵D₄-⁷F₅ transition. Furthermore, the characteristic spectrum peak of the Gd₂(MoO₄)₃: Eu³⁺/Tb³⁺ nanophosphor exhibits the corresponding spectra position (green emission at 544nm and red emission at 612nm). Hence, the obtained Gd₂(MoO₄)₃: RE³⁺ nanoplates may establish highly potentiality in light field applications.

Swift tuning from spherical molybdenum microspheres to hierarchical molybdenum disulfide nanostructures by switching from solvothermal to hydrothermal synthesis route

Herein, we report the synthesis of metallic molybdenum microspheres and hierarchical MoS₂ nanostructures by facile template-free solvothermal and hydrothermal approach, respectively. The morphological transition of the Mo microspheres to hierarchical MoS₂ nanoflower architectures is observed to be accomplished with change in solvent from ethylenediamine to water. The resultant marigold flower-like MoS₂ nanostructures are few layers thick with poor crystallinity while spherical ball-like molybdenum microspheres exhibit better crystalline nature. This is the first report pertaining to the synthesis of Mo microspheres and MoS₂ nanoflowers without using any surfactant, template or substrate in hydro/solvothermal regime. It is opined that such nanoarchitectures of MoS₂ are useful candidates for energy related applications such as hydrogen evolution reaction, Li ion battery and pseudocapacitors. Inquisitively, metallic Mo can potentially act as catalyst as well as fairly economical Surface Enhanced Raman Spectroscopy (SERS) substrate in biosensor applications.

Dispersion of Cobalt Nanoparticles on Nanowires Grown on Silicon Carbide-Alumina Nanocomposites

Silicon carbide-alumina nanocomposite supports including a nanowire architecture for a high dispersion of cobalt nanocatalysts were fabricated using a modified sol–gel process and paste extrusion process to form cylindrical shape beads, followed by thermal treatment. Well-developed aluminosilicate nanowires were formed on a nanoporous support, which are grown from a catalytic metal seed at the nanowire growth tips during heat treatment at 1,100 °C for 1 h under nitrogen gas flow. Cobalt oxide precursors were highly dispersed on the nanowires grown on the surface of the nanoporous bodies through a supercritical carbon dioxide fluid-assisted wet-impregnation process. The highly-dispersed Co nanoparticles with size of less than 10 nm were finally obtained on the nanowires via phase transitions from Co₃O₄ to CoO and from CoO to Co during the thermal reduction.

Nanostructured Fe₃O4@Fe₂O₃/Carbon Dots Heterojunction for Efficient Photocatalyst Under Visible Light

A facile method for the synthesis of porous magnetic nanoparticles (Fe₃O4@Fe₂O₃) embedded with carbon dots (CDs) are demonstrated for photocatalysis study. Here, a simple, low-cost and green method is developed to synthesize CDs from natural source. The synthesized carbon dots are highly water soluble and monodisperse with particle size 2–5 nm. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, UV-Vis absorption spectroscopy, BET surface area were employed to investigate the crystal structure, morphology, surface groups, optical properties, surface area of the synthesized nanocomposites. The photocatalytic performance of the nanocomposites was analyzed for the degradation of methylene blue under visible light and exhibited higher photocatalytic activity compared to Fe₂O₃ nanoparticles. Here the crucial role of CDs has been illustrated for the enhancement of photocatalytic activity.

Template Free Architecture of Hierarchical Nanostructured ZnIn₂S₄ Rose-Like Flowers for Solar Hydrogen Production

We have demonstrated the controlled synthesis of hierarchical nanostructured ZnIn₂S₄ using a facile template free hydrothermal/solvothermal method. The effect of solvents on the morphology and microstructure of ZnIn₂S₄ has been studied by using water, methanol and ethylene glycol as a solvents. The hierarchical nanostructure, i.e., rose-like morphology composed of very thin (5–6 nm) nanoplates of length ˜1 μm which was obtained in aqueous mediated ZnIn₂S₄. The porous structure (distorted flowers) and agglomerated nanoparticles were obtained using methanol-and ethylene glycol-mediated ZnIn₂S₄. Considering the band gap in the visible region, ZnIn₂S₄ is used as a solar light driven photocatalyst. An ecofriendly photocatalytic process for the conversion of poisonous H₂S into H₂ which is a green unconventional energy source has been demonstrated. The nanostructured ZnIn₂S₄ is employed as a photocatalyst for hydrogen production from H₂S via a solar light-driven eco-friendly approach. The stable photocatalytic activity of hydrogen evolution, i.e., 3964 μmol ⁻¹ was obtained using 0.5 gm of such hierarchical nanostructured ZnIn₂S₄ under visible light irradiation. The unique hierarchical nanostructured ZnIn₂S₄ ternary semiconductor having hexagonal layer is expected to have potential applications in solar cells, LEDs, charge storage, electrochemical recording, thermoelectricity, other prospective electronic and optical devices.

Transition Metal (Fe, Co, Ni) Oxide Micro/Nanostructures: Phase, Morphology, and Decomposition of Precursors

Transition metal oxides nano/micro structures including α-Fe₂O₃, Fe₃O₄, Co3O₄ and NiO were fabricated through controlling the decomposition of corresponding precursors. It is found that the morphology and phase composition of iron oxide depended strongly on heat-treatment approaches and conditions of the precursor. Furthermore, the iron oxide precursor created from FeCl₂, FeCl₃ and N₂H₄ in N,N-dimethylformamide solution with polyvinyl pyrrolidone via a hydrothermal synthesis was an unknown phase according to the X-ray diffraction (XRD) data base. Fe₃O4 nanoparticles (NPs) with several nanometers were obtained when the rod precursor was dissolved in water at room temperature, In contrast, when the precursor was calcined in an air atmosphere, porous α-Fe₂O₃ rods were acquired. Interestingly, the rod precursor can be transformed into perfect Fe₃O₄ rhombic dodecahedrons in the case of keeping the solvothermal reaction for a long time. For comparison, cobalt and nickel oxide precursors were prepared. After calcination, porous rod-like Co₃O₄ crystals comprised of tiny particles and flower-like NiO hierarchical structures comprised of porous sheets were obtained.

L-Cysteine-Assisted Synthesis of Urchin-Like γ-MnS and Its Lithium Storage Properties

MnS has been attracting more and more attentions in the fields of lithium ion batteries (LIBs) because of its high energy density and low voltage potential. In this paper, we present a simple method for the preparation of urchin-like γ-MnS microstructures using L-cysteine and MnCl2 · 4H2O as the starting materials. The urchin-like γ-MnS microstructures exhibit excellent cycling stability (823.4 mA h g-1 at a current density of 500 mA g-1, after 1000 cycles). And the discharge voltage is about 0.75 V, making it a good candidate for the application as the anode material in LIBs. SEM, TEM, and XRD were employed to inspect the changes of the active materials during the electrochemical process, which clearly indicate that the structural pulverization and reformation of the γ-MnS microstructures play important roles for the maintenance of the electrochemical performance during the charge/discharge process.

Synthesis of Mesoporous ZnO Nanosheets via Facile Solvothermal Method as the Anode Materials for Lithium-ion Batteries

Mesoporous ZnO nanosheets are synthesized through a room temperature solvothermal method. Transmission and scanning electronic microscopy observations indicate that as-prepared ZnO hierarchical aggregates are composed and assembled by nanosheets with a length of 1-2 μm and a thickness of 10-20 nm, and interlaced ZnO nanosheets irregularly stack together, forming a three-dimensional network. Furthermore, large mesopores are embedded in the walls of ZnO nanosheets, confirmed by Brunauer-Emmett-Teller (BET) measurement. Accordingly, the resulting ZnO anode exhibits a high and stable specific discharge capacity of 421 mAh g(-1) after 100 cycles at 200 mA g(-1) and a good rate capability. Such electrochemical performance could be attributed to the multiple synergistic effects of its mesoporous nanosheet structure, which can not only provide a large specific surface area for lithium storage, but also favor the ion transport and electrolyte diffusion.

Structural and spectroscopic characterization of prepared Ag2S nanoparticles with a novel sulfuring agent

Ag2S nanoparticles were prepared by a solvothermal process via reaction of Ag(NO3) and a new sulfuring agent from class of thio Schiff-base (2-(benzylidene amino) benzenethiol (C13H11NS)) in presence of various solvents. Spectra such as X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SEAD), ultraviolet-visible (UV-Vis) spectroscopy, thermo gravimetric-differential thermal analysis (TG-DTA), and Fourier transform Infrared (FT-IR) employed to characterize the synthesized products. Results of this paper indicate that shape and size of the silver sulfide can be controlled by means of setting certain reaction parameters such as the reaction temperature, presence of surfactant, and type of solvent. Silver sulfide nanoparticles with different morphology and size successfully prepared. In addition, the growth mechanisms of the Ag2S nanoparticles discussed preliminarily.

The synthesis and characterization of monodispersed chitosan-coated Fe3O4 nanoparticles via a facile one-step solvothermal process for adsorption of bovine serum albumin

Preparation of magnetic nanoparticles coated with chitosan (CS-coated Fe3O4 NPs) in one step by the solvothermal method in the presence of different amounts of added chitosan is reported here. The magnetic property of the obtained magnetic composite nanoparticles was confirmed by X-ray diffraction (XRD) and magnetic measurements (VSM). Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) allowed the identification of spherical nanoparticles with about 150 nm in average diameter. Characterization of the products by Fourier transform infrared spectroscopy (FTIR) demonstrated that CS-coated Fe3O4 NPs were obtained. Chitosan content in the obtained nanocomposites was estimated by thermogravimetric analysis (TGA). The adsorption properties of the CS-coated Fe3O4 NPs for bovine serum albumin (BSA) were investigated under different concentrations of BSA. Compared with naked Fe3O4 nanoparticles, the CS-coated Fe3O4 NPs showed a higher BSA adsorption capacity (96.5 mg/g) and a fast adsorption rate (45 min) in aqueous solutions. This work demonstrates that the prepared magnetic nanoparticles have promising applications in enzyme and protein immobilization.

Facile synthesis of folate-conjugated magnetic/fluorescent bifunctional microspheres

In this paper, we investigated the functional imaging properties of magnetic microspheres composed of magnetic core and CdTe quantum dots in the silica shell functionalized with folic acid (FA). The preparation procedure included the preparation of chitosan-coated Fe3O4 nanoparticles (CS-coated Fe3O4 NPs) prepared by a one-pot solvothermal method, the reaction between carboxylic and amino groups under activation of NHS and EDC in order to obtain the CdTe-CS-coated Fe3O4 NPs, and finally the growth of SiO2 shell vent the photoluminescence (PL) quenching via a Stöber method (Fe3O4-CdTe@SiO2). Moreover, in order to have a specific targeting capacity, the magnetic and fluorescent bifunctional microspheres were synthesized by bonding of SiO2 shell with FA molecules via amide reaction (Fe3O4-CdTe@SiO2-FA). The morphology, size, chemical components, and magnetic property of as-prepared composite nanoparticles were characterized by ultraviolet-visible spectroscopy, fluorescent spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), scanning transmission electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and vibrating sample magnetometer (VSM), respectively. The results show that the magnetic and fluorescent bifunctional microspheres have strong luminescent which will be employed for immuno-labeling and fluorescent imaging of HeLa cells.

Enhanced bactericidal action of SnO2 nanostructures having different morphologies under visible light: influence of surfactant

The practical use of visible-light for bactericide treatment has been established by tin oxide nanostructures synthesized using a surfactant-assisted solvothermal method. Anionic (sodium n-dodecyl sulfate, SDS), cationic (cetyltrimethyl ammonium bromide, CTAB) and non-ionic (Tritron X-100) surfactants were used as morphology controlling agents. The as-synthesized nanoparticles are characterized by X-ray powder diffraction (XRD), UV-vis spectroscopy and scanning electron microscopy (SEM). The XRD patterns of the as-synthesized tin oxide nanoparticles were well indexed to the tetragonal rutile structure. Nanostructure tin oxide powders of about 70-92nm in size have been obtained with different morphologies. The spherical, cauliflower, flower petals morphologies of surfactant-mediated SnO2 were obtained using X-100, CTAB, and SDS, respectively and the spherical-like for surfactant-free SnO2 was observed in the SEM micrographs. The surfactant-mediated SnO2 samples showed absorption edges red shift to longer wavelength and increased absorption intensities compared to surfactant-free SnO2. Antibacterial effectiveness of SnO2 samples was tested against general Escherichia coli (E. coli ATCC 25922) under UV-, visible-light and dark conditions. The surfactant promoted antimicrobial effect under visible light by SnO2 band gap modification. In contrast, the surfactant-free SnO2 possessed higher photokilling activity under UV-light. The antibacterial performance of SnO2 samples as a function of their structural and morphological features such as particle size, surface area and visible/UV light absorbing capacity was discussed.

Solvothermal Synthesis of Ternary Sulfides of Sb2 - xBixS3(x = 0.4, 1) with 3D Flower-Like Architectures

Flower-like nanostructures of Sb2 - xBixS3(x = 0.4, 1.0) were successfully prepared using both antimony diethyldithiocarbamate [Sb(DDTC)3] and bismuth diethyldithiocarbamate [Bi(DDTC)3] as precursors under solvothermal conditions at 180 °C. The prepared Sb2 - xBixS3 with flower-like 3D architectures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), high-resolution transmission electron microscopy (HRTEM), and selected area electron diffraction (SAED). The flower-like architectures, with an average diameter of ~4 μm, were composed of single-crystalline nanorods with orthorhombic structures. The optical absorption properties of the Sb2 - xBixS3 nanostructures were investigated by UV-Visible spectroscopy, and the results indicate that the Sb2 - xBixS3 compounds are semiconducting with direct band gaps of 1.32 and 1.30 eV for x = 0.4 and 1.0, respectively. On the basis of the experimental results, a possible growth mechanism for the flower-like Sb2 - xBixS3 nanostructures is suggested.

One-Pot Green Synthesis and Bioapplication ofl-Arginine-Capped Superparamagnetic Fe3O4 Nanoparticles

Water-solublel-arginine-capped Fe3O4 nanoparticles were synthesized using a one-pot and green method. Nontoxic, renewable and inexpensive reagents including FeCl3,l-arginine, glycerol and water were chosen as raw materials. Fe3O4 nanoparticles show different dispersive states in acidic and alkaline solutions for the two distinct forms of surface bindingl-arginine. Powder X-ray diffraction and X-ray photoelectron spectroscopy were used to identify the structure of Fe3O4 nanocrystals. The products behave like superparamagnetism at room temperature with saturation magnetization of 49.9 emu g-1 and negligible remanence or coercivity. In the presence of 1-ethyl-3-(dimethylaminopropyl) carbodiimide hydrochloride, the anti-chloramphenicol monoclonal antibodies were connected to thel-arginine-capped magnetite nanoparticles. The as-prepared conjugates could be used in immunomagnetic assay.(See supplementary material 1).