Development of lauroyl sulfated chitosan for enhancing hemocompatibility of chitosan

Centaurea behen leaf extract mediated green synthesized silver nanoparticles as antibacterial and removing agent of environmental pollutants with blood compatible and hemostatic effects

The present study focused on evaluating the antibacterial properties, radical scavenging, and photocatalytic activities of Centaurea behen-mediated silver nanoparticles (Cb-AgNPs). The formation of Cb-AgNPs was approved by UV-Vis spectrometry, Fourier-transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy (SEM), energy dispersive X-ray and X-ray diffraction. The results showed that the obtained AgNPs have a maximum absorbance peak at 450 nm with spherical morphology and an average size of 13.03 ± 5.8 nm. The catalytic activity of the Cb-AgNPs was investigated using Safranin O (SO) solution as a cationic dye model. The Cb-AgNPs performed well in the removal of SO. The coupled physical adsorption/photocatalysis reaction calculated about 68% and 98% degradation of SO dye under solar irradiation. The Cb-AgNPs inhibited the growth of gram-negative or positive bacteria strains and had excellent DPPH radicals scavenging ability (100% in a concentration of 200 µg/ml) as well as a good effect on reducing coagulation time (at concentrations of 200 and 500 µg/mL reduced clotting time up to 3 min). Considering the fact that green synthesized Cb-AgNPs have antioxidant and antibacterial properties and have a good ability to reduce coagulation time, they can be used in wound dressings. As well as these NPs with good photocatalytic activity can be a suitable option for degrading organic pollutants.

Preparation, Characterization, and Antioxidant Properties of Self-Assembled Nanomicelles of Curcumin-Loaded Amphiphilic Modified Chitosan

Curcumin (Cur) is a phytochemical with various beneficial properties, including antioxidant, anti-inflammatory, and anticancer activities. However, its hydrophobicity, poor bioavailability, and stability limit its application in many biological approaches. In this study, a novel amphiphilic chitosan wall material was synthesized. The process was carried out via grafting chitosan with succinic anhydride (SA) as a hydrophilic group and deoxycholic acid (DA) as a hydrophobic group; 1H-NMR, FTIR, and XRD were employed to characterize the amphiphilic chitosan (CS-SA-DA). Using a low-cost, inorganic solvent-based procedure, CS-SA-DA was self-assembled to load Cur nanomicelles. This amphiphilic polymer formed self-assembled micelles with a core-shell structure and a critical micelle concentration (CMC) of 0.093 mg·mL-1. Cur-loaded nanomicelles were prepared by self-assembly and characterized by the Nano Particle Size Potential Analyzer and transmission electron microscopy (TEM). The mean particle size of the spherical Cur-loaded micelles was 770 nm. The drug entrapment efficiency and loading capacities were up to 80.80 ± 0.99% and 19.02 ± 0.46%, respectively. The in vitro release profiles of curcumin from micelles showed a constant release of the active drug molecule. Cytotoxicity studies and toxicity tests for zebrafish exhibited the comparable efficacy and safety of this delivery system. Moreover, the results showed that the entrapment of curcumin in micelles improves its stability, antioxidant, and anti-inflammatory activity.

Exploring modified chitosan-based gene delivery technologies for therapeutic advancements

One of the critical steps in gene therapy is the successful delivery of the genes. Immunogenicity and toxicity are major issues for viral gene delivery systems. Thus, non-viral vectors are explored. A cationic polysaccharide like chitosan could be used as a nonviral gene delivery vector owing to its significant interaction with negatively charged nucleic acid and biomembrane, providing effective cellular uptake. However, the native chitosan has issues of targetability, unpacking ability, and solubility along with poor buffer capability, hence requiring modifications for effective use in gene delivery. Modified chitosan has shown that the "proton sponge effect" involved in buffering the endosomal pH results in osmotic swelling owing to the accumulation of a greater amount of proton and chloride along with water. The major challenges include limited exploration of chitosan as a gene carrier, the availability of high-purity chitosan for toxicity reduction, and its immunogenicity. The genetic drugs are in their infancy phase and require further exploration for effective delivery of nucleic acid molecules as FDA-approved marketed formulations soon.

Lactoferrin/pectin nanocomplex encapsulating ciprofloxacin and naringin as a lung targeting antibacterial nanoplatform with oxidative stress alleviating effect

Pseudomonas aeruginosa is an opportunistic Gram-negative bacterium with adaptive metabolic abilities. It can cause hospital-acquired infections with significant mortality rates, particularly in people with already existing medical conditions. Its ability to develop resistance to common antibiotics makes managing this type of infections very challenging. Furthermore, oxidative stress is a common consequence of bacterial infection and antibiotic therapy, due to formation of reactive oxygen species (ROS) during their mode of action. In this study we aimed to alleviate oxidative stress and enhance the antibacterial efficacy of ciprofloxacin (CPR) antibiotic by its co-encapsulation with naringin (NAR) within a polyelectrolyte complex (PEX). The PEX comprised of polycationic lactoferrin (LF) and polyanionic pectin (PEC). CPR/NAR-loaded PEX exhibited spherical shape with particle size of 237 ± 3.5 nm, negatively charged zeta potential (-23 ± 2.2 mV) and EE% of 61.2 ± 4.9 for CPR and 76.2 ± 3.4 % for NAR. The LF/PEC complex showed prolonged sequential release profile of CPR to limit bacterial expansion, followed by slow liberation of NAR, which mitigates excess ROS produced by CPR's mechanism of action without affecting its efficacy. Interestingly, this PEX demonstrated good hemocompatibility with no significant in vivo toxicity regarding hepatic and renal functions. In addition, infected mice administrated this nanoplatform intravenously exhibited significant CFU reduction in the lungs and kidneys, along with reduced immunoreactivity against myeloperoxidase. Moreover, this PEX was found to reduce the lungs´ oxidative stress via increasing both glutathione (GSH) and catalase (CAT) levels while lowering malondialdehyde (MDA). In conclusion, CPR/NAR-loaded PEX can offer a promising targeted lung delivery strategy while enhancing the therapeutic outcomes of CPR with reduced oxidative stress.

Poly(ethylene imine)-chitosan carbon dots: study of its physical-chemical properties and biological in vitro performance

Carbon dots (CDs) have been quickly extended for nanomedicine uses because of their multiple applications, such as bioimaging, sensors, and drug delivery. However, the interest in increasing their photoluminescence properties is not always accompanied by cytocompatibility. Thus, a knowledge gap exists regarding their interactions with biological systems linked to the selected formulations and synthesis methods. In this work, we have developed carbon dots (CDs) based on poly (ethylene imine) (PEI) and chitosan (CS) by using microwave irradiation, hydrothermal synthesis, and a combination of both, and further characterized them by physicochemical and biological means. Our results indicate that synthesized CDs have sizes between 1 and 5 nm, a high presence of amine groups on the surface, and increased positive ζ potential values. Further, it is established that the choice and use of different synthesis procedures can contribute to a different answer to the CDs regarding their optical and biological properties. In this regard, PEI-only CDs showed the longest photoluminescent emission lifetime, non-hemolytic activity, and high toxicity against fibroblast. On the other hand, CS-only CDs have higher PL emission, non-cytotoxicity associated with fibroblast, and high hemolytic activity. Interestingly, their combination using the proposed methodologies allow a synergic effect in their CDs properties. Therefore, this work contributes to developing and characterizing CD formulations based on PEI and CS and better understanding the CD's properties and biological interaction.

Production of fungal chitosan and fabrication of fungal chitosan/polycaprolactone electrospun nanofibers for tissue engineering

The present study investigated that chitosan production of Rhizopus oryzae NRRL 1526 and Aspergillus niger ATCC 16404. Fungal chitosans were characterized by scanning electron microscopy (SEM)-energy dispersive X-ray analysis, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimeter and deacetylation degrees of fungal chitosans were determined. The percentage yield of Ro-chitosan and An-chitosan were determined as 18.6% and 12.5%, respectively. According to percentage of chitosan yield and the results of the characterization studies, chitosan that obtained from Rhizopus oryzae NRRL 1526 was selected for subsequent studies. Cytotoxicity of chitosan obtained from Rhizopus oryzae NRRL 1526 was determined by MTT assay on human dermal fibroblast cell line. Acording to results of the cytotoxicity test fungal chitosan was nontoxic on cells. The high cell viability was observed 375 μg/mL concentration at 24th, 48th h periods and at the 187.5 μg/ml 72nd h periods on cells. The fungal chitosan obtained from Rhizopus oryzae NRRL 1526 was used to fabrication of electrospun nanofibers. Fungal chitosan based polymer solutions were prepared by adding different substances and different electrostatic spinning parameters were used to obtain most suitable nanofiber structure. Characterization studies of nanofibers were carried out by SEM, FTIR and X-ray diffraction. The most suitable nanofiber structure was determined as F4 formula. The nanofiber structure was evaluated to be thin, bead-free, uniform, flexible and easily remove from surface and taking the shape of the area. After the characterization analysis of fungal chitosan it was determined that the chitosan, which obtained from Rhizopus oryzae NRRL 1526 is actually chitosan polymer and this polymer is usable for pharmaceutical areas and biotechnological applications. The electrospun nanofiber that blends fungal chitosan and PCL polymers were fabricated successfully and that it can be used as fabrication wound dressing models. RESEARCH HIGHLIGHTS: Extraction of chitosan from Rhizopus oryzae NRRL 1526 and Aspergillus niger ATCC 16404 and characterization scanning electron microscopy-energy dispersive X-ray analysis, Fourier transform infrared spectroscopy, differential scanning calorimeter. Fabrication and characterization of the fungal chitosan/PCL electrospun nanofibers.

Fabrication of CO-releasing surface to enhance the blood compatibility and endothelialization of TiO2 nanotubes on titanium surface

Although the construction of nanotube arrays with the micro-nano structures on the titanium surfaces has demonstrated a great promise in the field of blood-contacting materials and devices, the limited surface hemocompatibility and delayed endothelial healing should be further improved. Carbon monoxide (CO) gas signaling molecule within the physiological concentrations has excellent anticoagulation and the ability to promote endothelial growth, exhibiting the great potential for the blood-contact biomaterials, especially the cardiovascular devices. In this study, the regular titanium dioxide nanotube arrays were firstly prepared in situ on the titanium surface by anodic oxidation, followed by the immobilization of the complex of sodium alginate/carboxymethyl chitosan (SA/CS) on the self-assembled modified nanotube surface, the CO-releasing molecule (CORM-401) was finally grafted onto the surface to create a CO-releasing bioactive surface to enhance the biocompatibility. The results of scanning electron microscopy (SEM), X-ray energy dispersion spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS) revealed that the CO-releasing molecules were successfully immobilized on the surface. The modified nanotube arrays not only exhibited excellent hydrophilicity but also could slowly release CO gas molecules, and the amount of CO release increased when cysteine was added. Furthermore, the nanotube array can promote albumin adsorption while inhibit fibrinogen adsorption to some extent, demonstrating its selective albumin adsorption; although this effect was somewhat reduced by the introduction of CORM-401, it can be significantly enhanced by the catalytic release of CO. The results of hemocompatibility and endothelial cell growth behaviors showed that, as compared with the CORM-401 modified sample, although the SA/CS-modified sample had better biocompatibility, in the case of cysteine-catalyzed CO release, the released CO could not only reduce the platelet adhesion and activation as well as hemolysis rate, but also promote endothelial cell adhesion and proliferation as well as vascular endothelial growth factor (VEGF) and nitric oxide (NO) expression. As a result, the research of the present study demonstrated that the releasing CO from TiO₂ nanotubes can simultaneously enhance the surface hemocompatibility and endothelialization, which could open a new route to enhance the biocompatibility of the blood-contacting materials and devices, such as the artificial heart valve and cardiovascular stents.

Preparation and application of chitosan-based medical electrospun nanofibers

Chitosan is a kind of polysaccharide cationic polymer, which has excellent biocompatibility, biodegradability and biological activity. In recent years, chitosan has been widely used as medical materials because of its non-toxicity, non-immunogenicity and rich sources. This paper reviews chitosan chemistry, the basic principles and influence of electrospinning technology, the blending of chitosan with polyethylene oxide, polyvinyl alcohol, polycaprolactone, polylactic acid, protein, polysaccharide and other polymer materials, the blending of chitosan with oxides, metals, carbon-based and other inorganic substances for electrospinning, the application of chitosan electrospinning nanofibers in medical field and its mechanism in clinical application. In order to provide reference for the in-depth study of electrospinning technology in the field of medical and health.

Progress in Research of Chitosan Chemical Modification Technologies and Their Applications

Chitosan, which is derived from chitin, is the only known natural alkaline cationic polymer. Chitosan is a biological material that can significantly improve the living standard of the country. It has excellent properties such as good biodegradability, biocompatibility, and cell affinity, and has excellent biological activities such as antibacterial, antioxidant, and hemostasis. In recent years, the demand has increased significantly in many fields and has huge application potential. Due to the poor water solubility of chitosan, its wide application is limited. However, chemical modification of the chitosan matrix structure can improve its solubility and biological activity, thereby expanding its application range. The review covers the period from 1996 to 2022 and was elaborated by searching Google Scholar, PubMed, Elsevier, ACS publications, MDPI, Web of Science, Springer, and other databases. The various chemical modification methods of chitosan and its main activities and application research progress were reviewed. In general, the modification of chitosan and the application of its derivatives have had great progress, such as various reactions, optimization of conditions, new synthetic routes, and synthesis of various novel multifunctional chitosan derivatives. The chemical properties of modified chitosan are usually better than those of unmodified chitosan, so chitosan derivatives have been widely used and have more promising prospects. This paper aims to explore the latest progress in chitosan chemical modification technologies and analyze the application of chitosan and its derivatives in various fields, including pharmaceuticals and textiles, thus providing a basis for further development and utilization of chitosan.

Selective Center Charge Density Enables Conductive 2D Metal-Organic Frameworks with Exceptionally High Pseudocapacitance and Energy Density for Energy Storage Devices

Conductive 2D conjugated metal-organic frameworks (c-MOFs) are attractive electrode materials due to their high intrinsic electrical conductivities, large specific surface area, and abundant unsaturated bonds/functional groups. However, the 2D c-MOFs reported so far have limited charge storage capacity during electrochemical charging and discharging, and the energy density is still unsatisfactory. In this work, a strategy of selective center charge density to expand the traditional electrode materials to the electrode-electrolyte coupled system with the prototypical of 2D Co-catecholate (Co-CAT) is proposed. Electrochemical mechanism studies and density functional theory calculations reveal that dual redox sites are achieved with the quinone groups (CAT) and metal-ion linkages (Co-O) serving as the active sites of pseudocapacitive cation (Na⁺ ) and redox electrolyte species (SO₃ ^2- ). The resultant electrode delivers an exceptionally high capacity of 1160 F g^-1 at 1 A g^-1 and a special self-discharge rate (86.8% after 48 h). Moreover, the packaged asymmetric device exhibits a state-of-the-art energy density of 158 W h kg^-1 at the power density of 2000 W kg^-1 and an excellent self-discharge rate of 80.6% after 48 h. This success will provide a new perspective for the performance enhancement for the 2D-MOF-based energy storage devices.

Low molecular weight sulfated chitosan efficiently reduces infection capacity of porcine circovirus type 2 (PCV2) in PK15 cells

Background

Porcine circovirus type 2 (PCV2)-associated diseases are a major problem for the swine industry worldwide. In addition to vaccines, the availability of antiviral polymers provides an efficient and safe option for reducing the impact of these diseases. By virtue of their molecular weight and repetitious structure, polymers possess properties not found in small-molecule drugs. In this perspective, we focus on chitosan, a ubiquitous biopolymer, that adjusts the molecular weight and sulfated-mediated functionality can act as an efficient antiviral polymer by mimicking PCV2-cell receptor interactions.

Methods

Sulfated chitosan (Chi-S) polymers of two molecular weights were synthesized and characterized by FTIR, SEM–EDS and elemental analysis. The Chi-S solutions were tested against PCV2 infection in PK15 cells in vitro and antiviral activity was evaluated by measuring the PCV2 DNA copy number, TCID50 and capsid protein expression, upon application of different molecular weights, sulfate functionalization, and concentrations of polymer. In addition, to explore the mode of action of the Chi-S against PCV2 infection, experiments were designed to elucidate whether the antiviral activity of the Chi-S would be influenced by when it was added to the cells, relative to the time and stage of viral infection.

Results

Chi-S significantly reduced genomic copies, TCID50 titers and capsid protein of PCV2, showing specific antiviral effects depending on its molecular weight, concentration, and chemical functionalization. Assays designed to explore the mode of action of the low molecular weight Chi-S revealed that it exerted antiviral activity through impeding viral attachment and penetration into cells.

Conclusions

These findings help better understanding the interactions of PCV2 and porcine cells and reinforce the idea that sulfated polymers, such as Chi-S, represent a promising candidates for use in antiviral therapies against PCV2-associated diseases. Further studies in swine are warranted.

Effects and treatment applications of polymeric nanoparticles on improving platelets' storage time: a review of the literature from 2010 to 2020

Maintaining the quality of platelet products and increasing their storage time are priorities for treatment applications. The formation of platelet storage lesions that limit the storage period and preservation temperature, which can prepare a decent environment for bacterial growth, are the most important challenges that researchers are dealing with in platelet preservation. Nanotechnology is an emerging field of science that has introduced novel solutions to resolve these problems. Here, we reviewed the reported effects of polymeric nanoparticles-including chitosan, dendrimers, polyethylene glycol (PEG), and liposome-on platelets in articles from 2010 to 2020. As a result, we concluded that the presence of dendrimer nanoparticles with a smaller size, negative charge, low molecular weight, and low concentration along with PEGylation can increase the stability and survival of platelets during storage. In addition, PEGylation of platelets can also be a promising approach to improve the quality of platelet bags during storage.

Chitosan-coated pore wall polycaprolactone three-dimensional porous scaffolds fabricated by porogen leaching method for bone tissue engineering: a comparative study on blending technique to fabricate scaffolds

One of the significant challenges in the fabrication of scaffolds for tissue engineering lies in the direct interaction of bioactive agents with cells in the scaffolds matrix, which curbs the effectiveness of bioactive agents resulting in diminished cell recognition and attachment ability of the scaffolds. Here, three-dimensional porous scaffolds were fabricated using polycaprolactone (PCL) and chitosan, by two approaches, i.e., blending and surface coating to compare their overall effectiveness. Blended scaffolds (Chi-PCL) were compared with the scaffolds fabricated using surface coating technique, where chitosan was coated on the pore wall of PCL scaffolds (C-PCL). The C-PCL exhibited a collective improvement in bioactivities of the stem cell on the scaffold, because of the cell compatible environment provided by the presence of chitosan over the scaffolds interface. The C-PCL showed the enhanced cell attachment and proliferation behavior of the scaffolds along with two-fold increase in hemolysis compatibility compared to Chi-PCL. Furthermore, the compression strength in C-PCL increased by 24.52% and 8.62% increase in total percentage porosity compared to Chi-PCL was attained. Along with this, all the bone markers showed significant upregulation in C-PCL scaffolds, which supported the surface coating technique over the conventional methods, even though the pore size of C-PCL was compromised by 19.98% compared with Chi-PCL.

Relationship and improvement strategies between drug nanocarrier characteristics and hemocompatibility: What can we learn from the literature

This article discusses the various blood interactions that may occur with various types of nano drug-loading systems. Nanoparticles enter the blood circulation as foreign objects. On the one hand, they may cause a series of inflammatory reactions and immune reactions, resulting in the rapid elimination of immune cells and the reticuloendothelial system, affecting their durability in the blood circulation. On the other hand, the premise of the drug-carrying system to play a therapeutic role depends on whether they cause coagulation and platelet activation, the absence of hemolysis and the elimination of immune cells. For different forms of nano drug-carrying systems, we can find the characteristics, elements and coping strategies of adverse blood reactions that we can find in previous researches. These adverse reactions may include destruction of blood cells, abnormal coagulation system, abnormal effects of plasma proteins, abnormal blood cell behavior, adverse immune and inflammatory reactions, and excessive vascular stimulation. In order to provide help for future research and formulation work on the blood compatibility of nano drug carriers.

Crustacean Waste-Derived Chitosan: Antioxidant Properties and Future Perspective

Chitosan is obtained from chitin that in turn is recovered from marine crustacean wastes. The recovery methods and their varying types and the advantages of the recovery methods are briefly discussed. The bioactive properties of chitosan, which emphasize the unequivocal deliverables contained by this biopolymer, have been concisely presented. The variations of chitosan and its derivatives and their unique properties are discussed. The antioxidant properties of chitosan have been presented and the need for more work targeted towards harnessing the antioxidant property of chitosan has been emphasized. Some portions of the crustacean waste are being converted to chitosan; the possibility that all of the waste can be used for harnessing this versatile multifaceted product chitosan is projected in this review. The future of chitosan recovery from marine crustacean wastes and the need to improve in this area of research, through the inclusion of nanotechnological inputs have been listed under future perspective.

Evidence Supporting the Safety of Pegylated Diethylaminoethyl-Chitosan Polymer as a Nanovector for Gene Therapy Applications

PURPOSE

Diethylaminoethyl-chitosan (DEAE-CH) is a derivative with excellent potential as a delivery vector for gene therapy applications. The aim of this study is to evaluate its toxicological profile for potential future clinical applications.

METHODS

An endotoxin-free chitosan (CH) modified with DEAE, folic acid (FA) and polyethylene glycol (PEG) was used to complex small interfering RNA (siRNA) and form nanoparticles (DEAE12-CH-PEG-FA2/siRNA). Based on the guidelines from the International Organization for Standardization (ISO), the American Society for Testing and Materials (ASTM), and the Nanotechnology Characterization Laboratory (NCL), we evaluated the effects of the interaction between these nanoparticles and blood components. In vitro screening assays such as hemolysis, hemagglutination, complement activation, platelet aggregation, coagulation times, cytokine production, and reactive species, such as nitric oxide (NO) and reactive oxygen species (ROS), were performed on erythrocytes, plasma, platelets, peripheral blood mononuclear cells (PBMC) and Raw 264.7 macrophages. Moreover, MTS and LDH assays on Raw 264.7 macrophages, PBMC and MG-63 cells were performed.

RESULTS

Our results show that a targeted theoretical plasma concentration (TPC) of DEAE12-CH-PEG-FA2/siRNA nanoparticles falls within the guidelines' thresholds: <1% hemolysis, 2.9% platelet aggregation, no complement activation, and no effect on coagulation times. ROS and NO production levels were comparable to controls. Cytokine secretion (TNF-α, IL-6, IL-4, and IL-10) was not affected by nanoparticles except for IL-1β and IL-8. Nanoparticles showed a slight agglutination. Cell viability was >70% for TPC in all cell types, although LDH levels were statistically significant in Raw 264.7 macrophages and PBMC after 24 and 48 h of incubation.

CONCLUSION

These DEAE12-CH-PEG-FA2/siRNA nanoparticles fulfill the existing ISO, ASTM and NCL guidelines' threshold criteria, and their low toxicity and blood biocompatibility warrant further investigation for potential clinical applications.

Use of hemostatic agents for surgical bleeding in laparoscopic partial nephrectomy: Biomaterials perspective

In recent years, there was an abrupt increase in the incidence of renal tumors, which prompt up the appearance of cutting-edge technology, including minimally invasive and organ-preserving approaches, such as laparoscopic partial nephrectomy (LPN). LPN is an innovative technique used to treat small renal masses that have been gaining popularity in the last few decades due to its promissory results. However, the bleeding control remains the main challenge since the majority of currently available hemostatic agents (HAs) used in other surgical specialities are inefficient in LPN. This hurried the search for effective HAs adapted for LPN surgical peculiarities, which resulted on the emergence of different types of topical HAs. The most promising are the natural origin HAs because of their inherent biodegradability, biocompatibility, and lowest toxicity. These properties turn them top interests' candidates as HAs in LPN. In this review, we present a deep overview on the progress achieved in the design of HAs based on natural origin polymers, highlighting their distinguishable characteristics and providing a clear understanding of their hemostat's role in LPN. This way it may be possible to establish a structure-composition properties relation, so that novel HAs for LPN can be designed to explore current unmet medical needs.

Hemocompatible Chitin-Chitosan Composite Fibers

Composite chitosan fibers filled with chitin nanofibrils (CNF) were obtained by the wet spinning method. The paper discusses the mechanical properties of such type fibers and their hemocompatibility, as well as the possibility of optimizing these properties by adding chitin nanofibrils. It was shown that low CNF concentration (about 0.5%) leads to an increase in fiber tensile strength due to the additional orientation of chitosan macromolecules. At the same time, with an increase in the content of CNF, the stability of the mechanical properties of composite fibers in a humid medium increases. All chitosan fibers, except 0.5% CNF, showed good hemocompatibility, even on prolonged contact with human blood. The addition of chitin nanofibers leads to decrease in hemoglobin molecules sorption due to the decline in optical density at wavelengths of 414 nm and 540 nm. Nevertheless, the hemolysis of fibers was comparable or even lesser that carbon hemosorbent, which is actively used in clinical practice.

Preparation of sulfatide mimicking oleic acid sulfated chitosan as a potential inhibitor for metastasis

Sulfatide is associated with numerous health problems, affecting different parts of the human body, including the metastasis; however, the underlying mechanisms are yet to be fully elucidated. Sulfatide has been used to potential inhibitor for tumor cell metastasis. In the present study we synthesized oleic acid sulfated chitosan (OlcShCs). It shows structural similarity to sulfatide because of its functional groups (sulfate and fatty acyl chains). Chitosan has smart properties such as biocompatibility, biodegradability and non-toxicity. We have prepared oleic acid sulfated chitosan (OlcShCs) by chitosan modification to mimic sulfatide. Its structure was characterized by FT-IR, H-NMR, and thermogravimetric analysis. After characterization studies its antimicrobial, antifungal and cytotoxic properties were investigated. Oleic acid sulfated chitosan (OlcShCs) was tested for its anti-cancer potential against human cancer cell lines (HeLa (ATCC® CCL-2™)) for 24 h, 48 h and 72 h using the MTT assays. This new material which is soluble at physiological conditions, is a potential candidate for further metastasis inhibition investigations.

Chitosan Nanoparticles: Shedding Light on Immunotoxicity and Hemocompatibility

Nanoparticles (NPs) assumed an important role in the area of drug delivery. Despite the number of studies including NPs are growing over the last years, their side effects on the immune system are often ignored or omitted. One of the most studied polymers in the nano based drug delivery system field is chitosan (Chit). In the scientific literature, although the physicochemical properties [molecular weight (MW) or deacetylation degree (DDA)] of the chitosan, endotoxin contamination and appropriate testing controls are rarely reported, they can strongly influence immunotoxicity results. The present work aimed to study the immunotoxicity of NPs produced with different DDA and MW Chit polymers and to benchmark it against the polymer itself. Chit NPs were prepared based on the ionic gelation of Chit with sodium tripolyphosphate (TPP). This method allowed the production of two different NPs: Chit 80% NPs (80% DDA) and Chit 93% NPs (93% DDA). In general, we found greater reduction in cell viability induced by Chit NPs than the respective Chit polymers when tested in vitro using human peripheral blood monocytes (PBMCs) or RAW 264.7 cell line. In addition, Chit 80% NPs were more cytotoxic for PBMCs, increased reactive oxygen species (ROS) production (above 156 μg/mL) in the RAW 264.7 cell line and interfered with the intrinsic pathway of coagulation (at 1 mg/mL) when compared to Chit 93% NPs. On the other hand, only Chit 93% NPs induced platelet aggregation (at 2 mg/mL). Although Chit NPs and Chit polymers did not stimulate the nitric oxide (NO) production in RAW 264.7 cells, they induced a decrease in lipopolysaccharide (LPS)-induced NO production at all tested concentrations. None of Chit NPs and polymers caused hemolysis, nor induced PBMCs to secrete TNF-α and IL-6 cytokines. From the obtained results we concluded that the DDA of the Chit polymer and the size of Chit NPs influence the in vitro immunotoxicity results. As the NPs are more cytotoxic than the corresponding polymers, one should be careful in the extrapolation of trends from the polymer to the NPs, and in the comparisons among delivery systems prepared with different DDA chitosans.

Isolation methods for particle protein corona complexes from protein-rich matrices

Background: Nanoparticles become rapidly encased by a protein layer when they are in contact with biological fluids. This protein shell is called a corona. The composition of the corona has a strong influence on the surface properties of the nanoparticles. It can affect their cellular interactions, uptake and signaling properties. For this reason, protein coronae are investigated frequently as an important part of particle characterization. Main body of the abstract: The protein corona can be analyzed by different methods, which have their individual advantages and challenges. The separation techniques to isolate corona-bound particles from the surrounding matrices include centrifugation, magnetism and chromatographic methods. Different organic matrices, such as blood, blood serum, plasma or different complex protein mixtures, are used and the approaches vary in parameters such as time, concentration and temperature. Depending on the investigated particle type, the choice of separation method can be crucial for the subsequent results. In addition, it is important to include suitable controls to avoid misinterpretation and false-positive or false-negative results, thus allowing the achievement of a valuable protein corona analysis result. Conclusion: Protein corona studies are an important part of particle characterization in biological matrices. This review gives a comparative overview about separation techniques, experimental parameters and challenges which occur during the investigation of the protein coronae of different particle types.

Current Development on Chitosan-based Antimicrobial Drug Formulations for the Wound Healing

BACKGROUND

Derived from polyose, chitosan is an outstanding natural linear polysaccharide comprised of random arrangement of β-(1-4)-linked D-Glucosamine and N-acetyl-DGlucosamine units.

OBJECTIVE

Researchers have been using chitosan as a network forming or gelling agent with economically available, present polyose, low immunogenicity, biocompatibility, non-toxicity, biodegradability, protects against secretion from irritation and don't suffer the danger of transmission animal infective agent.

METHODS

Furthermore, recent studies gear up the chitosan used in the development of various biopharmaceutical formulations, including nanoparticles, hydrogels, implants, films, fibers, etc. Results: These formulations produce potential activities as antimicrobials, cancer treatment, medical aid, and wound healing, controlled unleash device or drug trigger retarding device and 3DBiomedical sponge, etc. Conclusion: The present article discusses the development of various drug formulations utilizing chitosan as biopolymers for the repairing of broken tissues and healing in case of wound infection.

Development and Characterization of Bioadhesive Film Embedded with Lignocaine and Calcium Fluoride Nanoparticles

The formation of biofilm by Streptococcus mutans on the tooth surface is the primary cause of dental caries and periodontal diseases, and fluoride (F) has shown tremendous potential as a therapeutic moiety against these problems. Herein, we report an efficient multi-ingredient bioadhesive film-based delivery system for oral cavity to combat dental problems with an ease of administration. Thiolated chitosan-based bioadhesive film loaded with calcium fluoride nanoparticles (CaF₂ NPs) and lignocaine as a continuous reservoir for prolonged delivery was successfully prepared and characterized. The polygonal CaF₂ NPs with an average particle size less than 100 nm, PDI 0.253, and + 6.10 mV zeta potential were synthesized and loaded in film. The energy dispersive x-ray (EDX) spectroscopy confirmed the presence 33.13% F content in CaF₂ NPs. The characterization of the three film trials for their mechanical strength, bioadhesion, drug release, and permeation enhancement suggested film B as better among the three trials and showed significant outcomes, indicating the potential application of the medicated bioadhesive film. In vitro dissolution studies revealed sustained release pattern of lignocaine and CaF₂ NP following Krosmeyer-Peppas model over 8 h. Franz diffusion studies showed the prolonged contact time of film with mucosa that facilitated the transport of CaF₂ NPs and lignocaine across the mucosa. Hence, the prepared bioadhesive film-based system showed good potential for better management of dental problems. Graphical Abstract.

Hazard Assessment of Polymeric Nanobiomaterials for Drug Delivery: What Can We Learn From Literature So Far

The physicochemical properties of nanobiomaterials, such as their small size and high surface area ratio, make them attractive, novel drug-carriers, with increased cellular interaction and increased permeation through several biological barriers. However, these same properties hinder any extrapolation of knowledge from the toxicity of their raw material. Though, as suggested by the Safe-by-Design (SbD) concept, the hazard assessment should be the starting point for the formulation development. This may enable us to select the most promising candidates of polymeric nanobiomaterials for safe drug-delivery in an early phase of innovation. Nowadays the majority of reports on polymeric nanomaterials are focused in optimizing the nanocarrier features, such as size, physical stability and drug loading efficacy, and in performing preliminary cytocompatibility testing and proving effectiveness of the drug loaded formulation, using the most diverse cell lines. Toxicological studies exploring the biological effects of the polymeric nanomaterials, particularly regarding immune system interaction are often disregarded. The objective of this review is to illustrate what is known about the biological effects of polymeric nanomaterials and to see if trends in toxicity and general links between physicochemical properties of nanobiomaterials and their effects may be derived. For that, data on chitosan, polylactic acid (PLA), polyhydroxyalkanoate (PHA), poly(lactic-co-glycolic acid) (PLGA) and policaprolactone (PCL) nanomaterials will be evaluated regarding acute and repeated dose toxicity, inflammation, oxidative stress, genotoxicity, toxicity on reproduction and hemocompatibility. We further intend to identify the analytical and biological tests described in the literature used to assess polymeric nanomaterials toxicity, to evaluate and interpret the available results and to expose the obstacles and challenges related to the nanomaterial testing. At the present time, considering all the information collected, the hazard assessment and thus also the SbD of polymeric nanomaterials is still dependent on a case-by-case evaluation. The identified obstacles prevent the identification of toxicity trends and the generation of an assertive toxicity database. In the future, in vitro and in vivo harmonized toxicity studies using unloaded polymeric nanomaterials, extensively characterized regarding their intrinsic and extrinsic properties should allow to generate such database. Such a database would enable us to apply the SbD approach more efficiently.

N-octyl chitosan derivatives as amphiphilic carrier agents for herbicide formulations

This study investigates the potential of N-octyl chitosan derivatives, namely N-octyl-O-sulfate chitosan (NOOSC), N-octyl-N-succinyl chitosan (NONSC) and N-octyl-O-glycol chitosan (NOOGC) as amphiphilic carrier agents for atrazine in water-insoluble herbicide formulations. The N-octyl chitosan derivatives were characterised using several analytical instruments such as Fourier Transform Infrared (FTIR) Spectrometer, CHNS-O Elemental Analyser (CHNS-O), Transmission Electron Microscope (TEM), Thermogravimetric Analyser (TGA), Differential Scanning Calorimeter (DSC) and Fluorescence Spectrometer. The encapsulation of atrazine by N-octyl chitosan derivatives was studied using a High Performance Liquid Chromatography (HPLC). The FTIR spectra of N-octyl chitosan derivatives confirmed the presence of hydrophobic and hydrophilic groups on chitosan backbone. TEM images revealed that N-octyl chitosan derivatives have formed self-aggregates with a spherical shape. The CMC values for N-octyl chitosan derivatives were between 0.06 and 0.09 mg/mL. The encapsulation efficiency (EE) values for amphiphilic chitosan were greater than 90%. The release profiles showed different release behaviour of pure herbicide in solution as compared to atrazine-loaded N-octyl chitosan derivatives. Results suggest that the chitosan derivatives offer promising characteristics that enable them to act as effective carrier agents for atrazine. In conclusion, the application of N-octyl chitosan derivatives could reduce the use of organic solvents in herbicide formulations by 37.5%.

PVA/CS and PVA/CS/Fe gel beads' synthesis mechanism and their performance in cultivating anaerobic granular sludge

Biomass washout from high-speed anaerobic suspended bed bio-reactors is still a challenge to their stable operation. Preserving active biomass to efficiently retain biomass in the reactor is one of the solutions to this problem. Herein, two carriers (polyvinyl alcohol/chitosan (PVA/CS) and PVA/CS/Fe gel beads) were prepared using the cross-linking method. The fourier transform infrared (FTIR) and ¹³C nuclear magnetic resonance (¹³C NMR) analyses showed that PVA/CS gel beads formed mainly through hydrogen-bonds (NH₂OH^-). Furthermore, FTIR, ¹³C NMR, energy dispersive spectrum (EDS), X-ray diffractometer (XRD) and X-ray photoelectron spectroscopy (XPS) analyses showed that PVA/CS/Fe gel beads formed mainly through chelate bond (NH₂-Fe^M+OH^-). The scanning electron microscope (SEM) results affirmed that the gel beads had rough and well-developed porous structure for the attachment of microbes. Furthermore, the abilities of gel beads on the cultivation of granular sludge in an up-flow anaerobic sludge bed (UASB) reactor were effectively demonstrated while treating wastewater polluted with glucose and alkali lignin. The results showed that the gel beads-assisted reactors had a higher performance than those without the gel beads. The cultivation of granules in these reactors was accelerated, while the granules became bigger and exhibited better settling velocities. The reactor with gel beads was easier to withstand a higher organic loading rate due to dense microbial aggregates, which were caused by more humic-like substance. Particularly, the reactor with PVA/CS/Fe gel beads was able to improve the overall robustness of the system due to stronger mechanical properties of gel beads, and also prevented cells detachment.

Cocoa Pod Husk Pectin Intended as a Pharmaceutical Excipient Has No Adverse Effects on Haematological Parameters in Sprague Dawley Rats

Natural polymer research has recently become the focus of intensive research in the quest for new enabling excipients for novel drugs in pharmaceutical formulation for optimal treatment outcomes. Evaluations of some excipients have shown deleterious haematological effects of varying extents on the safety profile of these excipients. A 90-day subchronic toxicity study was conducted to evaluate the influence of cocoa pod husk (CPH) pectin on indicators for haematotoxicity. Male and female Sprague Dawley rats (SDRs) were fed with CPH pectin in doses up to 71.4 mg/kg. The effects of CPH pectin on the haematological indices, direct and total bilirubin, and the spleen were determined. The results indicated that CPH pectin did not induce any untoward toxic effects on the haematological indices, bilirubin levels, and the spleen. There were, however, elevations in MCV at day 30, which was not sustained after the 90 days. The data obtained from this study did not reveal any remarkable findings of toxicological relevance to the haematopoietic system.

Thermoresponsive graphene oxide - starch micro/nanohydrogel composite as biocompatible drug delivery system

Introduction: Stimuli-responsive hydrogels, which indicate a significant response to the environmental change (e.g., pH, temperature, light, …), have potential applications for tissue engineering, drug delivery systems, cell therapy, artificial muscles, biosensors, etc. Among the temperature-responsive materials, poly (N-isopropylacrylamide) (PNIPAAm) based hydrogels have been widely developed and their properties can be easily tailored by manipulating the properties of the hydrogel and the composite material. Graphene oxide (GO), as a multifunctional and biocompatible nanosheet, can efficiently improve the mechanical strength and response rate of PNIPAAm-based hydrogels. Here, hydrogel composites (HCs) of PNIPAAm with GO was developed using the modified starch as a biodegradable cross-linker. Methods: Micro/nanohydrogel composites were synthesized by free radical polymerization of NIPAAm in the suspension of different feed ratio of GO using maleate-modified starch (St-MA) as cross-linker and Tetrakis (hydroxymethyl) phosphonium chloride (THPC) as a strong oxygen scavenger. The HCs were characterized by FT-IR, DSC, TGA, SEM, and DLS. Also, the phase transition, swelling/deswelling behavior, hemocompatibility and biocompatibility of the synthesized HCs were investigated. Results: The thermal stability, phase transition temperature and internal network crosslinking of HCs increases with increasing of the GO feed ratio. Also, the swelling/deswelling, hemolysis, and MTT assays studies confirmed that the HCs are a fast response, hemocompatible and biocompatible materials. Conclusion: The employed facile approach for the synthesis of HCs yields an intelligent material with great potential for biomedical applications.

Bio-Based Polymers with Potential for Biodegradability

A variety of renewable starting materials, such as sugars and polysaccharides, vegetable oils, lignin, pine resin derivatives, and proteins, have so far been investigated for the preparation of bio-based polymers. Among the various sources of bio-based feedstock, vegetable oils are one of the most widely used starting materials in the polymer industry due to their easy availability, low toxicity, and relative low cost. Another bio-based plastic of great interest is poly(lactic acid) (PLA), widely used in multiple commercial applications nowadays. There is an intrinsic expectation that bio-based polymers are also biodegradable, but in reality there is no guarantee that polymers prepared from biorenewable feedstock exhibit significant or relevant biodegradability. Biodegradability studies are therefore crucial in order to assess the long-term environmental impact of such materials. This review presents a brief overview of the different classes of bio-based polymers, with a strong focus on vegetable oil-derived resins and PLA. An entire section is dedicated to a discussion of the literature addressing the biodegradability of bio-based polymers.

Novel self-assembled pH-responsive biomimetic nanocarriers for drug delivery

Novel pH-responsive biodegradable biomimetic nanocarriers were prepared by the self-assembly of N-acetyl-l-histidine-phosphorylcholine-chitosan conjugate (NAcHis-PCCs), which was synthesized via Atherton-Todd reaction to couple biomembrane-like phosphorylcholine (PC) groups, and N,N'-carbonyldiimidazole (CDI) coupling reaction to link pH-responsive N-acetyl-l-histidine (NAcHis) moieties to chitosan. In vitro biological assay revealed that NAcHis-PCCs nanoparticles had excellent biocompatibility to avoid adverse biological response mainly owing to their biomimetic PC shell, and DLS results confirmed their pH-responsive behavior in acidic aqueous solution (pH≤6.0). Quercetin (QUE), an anti-inflammatory, antioxidant and potential anti-tumor hydrophobic drug, was effectively loaded in NAcHis-PCCs nanocarriers and showed a pH-triggered release behavior with the enhanced QUE release at acidic pH5.5 compared to neutral pH7.4. The results indicated that pH-responsive biomimetic NAcHis-PCCs nanocarriers might have great potential for site-specific delivery to pathological acidic microenvironment avoiding unfavorable biological response.

Synergistic combination of antioxidants, silver nanoparticles and chitosan in a nanoparticle based formulation: Characterization and cytotoxic effect on MCF-7 breast cancer cell lines

HYPOTHESIS

Chitosan (Cs) is a biocompatible, biodegradable cationic polymer having the ability of targeted drug delivery. Vitamin E and C are not synthesized in our body thus, when encapsulated within a carrier system these vitamins in combination with/alone can be utilized for their anti-cancer potentials.

EXPERIMENT

The present investigation was conducted to develop a stable nanoparticle based formulation encapsulating antioxidants (Vitamin E, catechol) and silver nanoparticles synthesized from Hibiscus rosa-sinensis (HRS) petal extracts within a chitosan matrix. The prepared nanoformulations were characterized using Field emission scanning electron microscopy (Fe-SEM), X-ray diffraction (XRD) and Attenuated Total Reflection Fourier Transform Infrared spectroscopy (ATR-FTIR). They were further tested for their antioxidant potentials using DPPH assay, hydrogen peroxide scavenging assay, nitric oxide scavenging assay and ferrous antioxidant reducing potential assay.

FINDINGS

The nanoformulations were found to be highly hemocompatible and showed high encapsulation efficiency up to 76%. They also showed higher antioxidant activity than their base materials. Further, their anti-cancer efficacy was observed against MCF-7 breast cancer cells having IC50 values of 53.36±0.36μg/mL (chitosan-ascorbic acid-glucose), 55.28±0.85μg/mL (chitosan-Vitamin E), 63.72±0.27μg/mL (Chitosan-catechol) and 58.53±0.55μg/mL (chitosan-silver nanoparticles). Thus, the prepared formulations can be therapeutically applied for effective and targeted delivery in breast cancer treatment.

Biological and immunotoxicity evaluation of antimicrobial peptide-loaded coatings using a layer-by-layer process on titanium

The prevention and control of peri-implantitis is a challenge in dental implant surgery. Dental implants with sustained antimicrobial coating are an ideal way of preventing peri-implantitis. This study reports development of a non- immunotoxicity multilayered coating on a titanium surface that had sustained antimicrobial activity and limited early biofilm formation. In this study, the broad spectrum AMP, Tet213, was linked to collagen IV through sulfo-SMPB and has been renamed as AMPCol. The multilayer AMPCol coatings were assembled on smooth titanium surfaces using a LBL technique. Using XPS, AFM, contact angle analysis, and QCM, layer-by-layer accumulation of coating thickness was measured and increased surface wetting compared to controls was confirmed. Non-cytotoxicity to HaCaT and low erythrocyte hemolysis by the AMPCol coatings was observed. In vivo immunotoxicity assays showed IP administration of AMPCol did not effect serum immunoglobulin levels. This coating with controlled release of AMP decreased the growth of both a Gram-positive aerobe (Staphylococcus aureus) and a Gram-negative anaerobe (Porphyromonas gingivalis) up to one month. Early S. aureus biofilm formation was inhibited by the coating. The excellent long-term sustained antimicrobial activity of this multilayer coating is a potential method for preventing peri-implantitis through coated on the neck of implants before surgery.

Preparation, characterization, and biochemical activities of N-(2-Carboxyethyl)chitosan from squid pens

Chitosan was prepared by alkaline N-deacetylation of β-chitin from squid pens, and N-carboxyethylated derivatives (N-CECS) with different degrees of substitution (DS) were synthesized. The carboxyethylation of the polysaccharide was identified by Fourier transform infrared, (1)H and (13)C nuclear magnetic resonance (NMR), and X-ray diffraction analyses. The DS of the derivatives was calculated by (1)H NMR and elemental analysis. All three N-CECS samples showed good water solubility at pH > 6.5. The antioxidant properties and bile acid binding capacity of the derivatives were studied in vitro. The highest bile acid binding capacity of all N-CECS reached 36.9 mg/g, which was 2.6-fold higher than that of chitosan. N-CECS showed a stronger scavenging effect on 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) radical ability, and EC50 values were below 2 mg/mL. The scavenging ability of N-CECS against superoxide radicals correlated well with the DS and concentration of N-CECS. These results indicated that N-carboxyethylation is a possible approach to prepare chitosan derivatives with desirable in vitro biochemical properties.

Bionic design for anticoagulant surface via synthesized biological macromolecules with heparin-like chains

A heparin-like anticoagulant membrane surface with functional groups and conjugated structure was constructed by blending a synthesized copolymer for blood purification.