Poly(N-vinylpyrrolidone)-modified poly(dimethylsiloxane) elastomers as anti-biofouling materials

Surface modification of polydimethylsiloxane by the cataractous eye protein isolate

Polydimethylsiloxane (PDMS), even though widely used in microfluidic applications, its hydrophobic nature restricts its utility in some cases. To address this, PDMS may be used in conjunction with a hydrophilic material. Herein, the PDMS surface is modified by plasma treatment followed by cross-linking with the cataractous eye protein isolate (CEPI). CEPI-PDMS composites are prepared at three pH and the effects of CEPI on the chemical, physical, and electrical properties of PDMS are extensively investigated. The cross-linking between PDMS and the protein are confirmed by FTIR, and the contact angle measurements indicate the improved hydrophilic nature of the composite films as compared to PDMS. Atomic Force Microscopy results demonstrate that the surface roughness is enhanced by the incorporation of the protein and is a function of the pH. The effective elastic modulus of the composites is improved by the incorporation of protein into the PDMS matrix. Measurements of the dielectric properties of these composites indicate that they behave as capacitors at lower frequency range while demonstrating resistive characteristics at higher frequency. These composites provide preliminary ideas in developing flexible devices for potential applications in diverse areas such as energy storage materials, and thermo-elective wireless switching devices.

An Electromagnetically Controllable Microrobotic Interventional System for Targeted, Real-Time Cardiovascular Intervention

Robotic magnetic manipulation systems offer a wide range of potential benefits in medical fields, such as precise and selective manipulation of magnetically responsive instruments in difficult-to-reach vessels and tissues. However, more preclinical/clinical studies are necessary before robotic magnetic interventional systems can be widely adopted. In this study, a clinically translatable, electromagnetically controllable microrobotic interventional system (ECMIS) that assists a physician in remotely manipulating and controlling microdiameter guidewires in real time, is reported. The ECMIS comprises a microrobotic guidewire capable of active magnetic steering under low-strength magnetic fields, a human-scale electromagnetic actuation (EMA) system, a biplane X-ray imaging system, and a remote guidewire/catheter advancer unit. The proposed ECMIS demonstrates targeted real-time cardiovascular interventions in vascular phantoms through precise and rapid control of the microrobotic guidewire under EMA. Further, the potential clinical effectiveness of the ECMIS for real-time cardiovascular interventions is investigated through preclinical studies in coronary, iliac, and renal arteries of swine models in vivo, where the magnetic steering of the microrobotic guidewire and control of other ECMIS modules are teleoperated by operators in a separate control booth with X-ray shielding. The proposed ECMIS can help medical physicians optimally manipulate interventional devices such as guidewires under minimal radiation exposure.

Preparation and characterization of photopolymerized poly(l-lactide-co-ε-caprolactone-co-N-vinyl-2-pyrrolidone) network as anti-biofouling materials

The anti-biofouling properties have important applications in the medical field. In this study, cross-linked networks were prepared by photopolymerizing two synthetic macromonomers, including fumaric acid monoethyl ester (FAME) functionalized, three-armed poly(l-lactide) prepolymers (3-PLLA-F) and poly(ε-caprolactone) prepolymers (2-PCL-F), with N-vinyl-2-pyrrolidone (NVP) as the diluent. The prepared networks were characterized by their thermal properties, mechanical properties, cytotoxicity experiments and anti-biofouling properties. The Young's modulus and tensile strength of networks decreased by increasing PCL content. In contrast, the elongation of networks significantly increased. Moreover, no obvious cytotoxicity was observed, and the adhesion of L929 fibroblasts and platelets was resisted. Combined with Digital Light Processing technology (DLP) in the future, the designed polymer network could potentially be commercial in the field of biological anti-fouling materials.

The poly(l-lactide-co-ε-caprolactone-co-N-vinyl-2-pyrrolidone) network formed by UV curing could resist the adhesion of L929 fibroblasts, platelets and bacteria. It could be used in the field of customized biomaterials with biological anti-fouling.

Anti-Biofouling Polymers with Special Surface Wettability for Biomedical Applications

The use of anti-biofouling polymers has widespread potential for counteracting marine, medical, and industrial biofouling. The anti-biofouling action is usually related to the degree of surface wettability. This review is focusing on anti-biofouling polymers with special surface wettability, and it will provide a new perspective to promote the development of anti-biofouling polymers for biomedical applications. Firstly, current anti-biofouling strategies are discussed followed by a comprehensive review of anti-biofouling polymers with specific types of surface wettability, including superhydrophilicity, hydrophilicity, and hydrophobicity. We then summarize the applications of anti-biofouling polymers with specific surface wettability in typical biomedical fields both in vivo and in vitro, such as cardiology, ophthalmology, and nephrology. Finally, the challenges and directions of the development of anti-biofouling polymers with special surface wettability are discussed. It is helpful for future researchers to choose suitable anti-biofouling polymers with special surface wettability for specific biomedical applications.

Long-lasting hydrophilic surface generated on poly(dimethyl siloxane) with photoreactive zwitterionic polymers

Poly(dimethylsiloxane) (PDMS) is known as one of the most established polymers for making elastomers. Therefore, it is commonly used for the fabrication of biomedical devices. Many PDMS surface modification processes have been proposed recently to increase PDMS reliability in medical fields. However, the modified surface's long-term stability is still limited. Hydrophobic recovery of PDMS is widely recognized as a factor that reduces the efficacy of PDMS surface modification. The photoreactive zwitterionic polymer effectively suppresses the hydrophobic recovery of PDMS, according to the current analysis. The photoreactive zwitterionic monomer, 2-[2-(Methacryloyloxy)ethyldimethylanmmonium] ethyl benzophenoxy phosphate (MBPP) was polymerized by conventional radical polymerization and coated on O₂-plasma-treated PDMS specimens. The specimens were immersed in an aqueous solution of 2-methacryloyloxyethyl phosphorylcholine (MPC) and exposed under ultraviolet (UV) radiation for 3 h. Instead, of poly(MBPP) (PMBPP), benzophenone (BP) was also used as a conventional photoinitiator. The time-dependent change in the wettability and elemental composition of the specimen surface was monitored for nine weeks after photo-grafting of poly[2-methacryloyloxyethyl phosphorylcholine (MPC)] (PMPC). The advancing and receding contact angles (θ_A/θ_R) of the pristine PDMS specimen were 112°/71° and significantly decreased immediately after the grafting of PMPC regardless of types of photoinitiator. However, the hydrophobicity of the surface gradually recovered, and θ_A was changed from 12° to 81° for nine weeks of storage under air atmosphere when BP was used as a photoinitiator for graft polymerization of MPC. However, surface hydrophilicity (θ_A ≅ 20°) of the surface grafted with PMPC with PMBPP as an initiator was effectively preserved for nine weeks. This surface also showed excellent lubricity and non-fouling properties regardless of the storage periods. Therefore, zwitterionic photoreactive polymer, PMBPP, is then used as a macrophotoinitiator for the surface modification of PDMS.

Investigation of corrosion and thermal behavior of PU–PDMS-coated AISI 316L

Polydimethylsiloxane (PDMS) is widely used from biomedical to industrial applications due to its nontoxic, hydrophobic, and transparent characteristics. PDMS has good thermal and adhesion properties; however, its mechanical properties are comparatively weak. Therefore, PDMS is blended with various polymers to effectively improve its mechanical properties. In this study, polyurethane (PU)–polydimethylsiloxane (PDMS) blended coatings of different concentrations were applied on the AISI 316L stainless steel surface. Their effects on corrosion and tribocorrosion properties were investigated in Ringer’s solutions. The blended polymer coatings were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The thermal properties of samples were examined by TGA and DSC. The surface images and cross-sectional were investigated using scanning electron microscopy (SEM). Tribocorrosion tests were carried out at open circuit potential (OCP). It was determined that hydrophobicity and thermal stability of polymer coating increased, while corrosion resistance slightly decreased with the increasing PDMS concentration in the polymer blended. The friction coefficient of blends decreased as the PU concentration increased. As a result, it was determined that the polymer-coated samples containing up to 50% PDMS prevented corrosive wear under the OCP wear test in Ringer’s solutions.

Photopolymerized poly(l-lactide-b-N-vinyl-2-pyrrolidone) network resists cell adhesion in situ

A three-armed star-shaped poly(l-lactide) (PLLA) oligomer was synthesized using glycerol to ring-opening and polymerize l-lactide. The resultant oligomer introduced photoreactive groups at the terminal of PLLA chains by a coupling reaction with monoethyl fumarate (FAME). Photopolymerizable resin has been prepared by mixing PLLA 3-FAME, N-vinyl-2-pyrrolidone (NVP) as a reactive diluent and Irgacure 2959 as a photoinitiator. The PLLA 3-FAME/NVP cross-linked network could be formed by UV curing and was characterized through mechanical property tests, cytotoxicity experiments and cell adhesion experiments. In the dry state, Young's modulus and tensile strength of the network were significantly higher than those of pure PLLA formed by fused deposition modeling (FDM) printing, due to the formation of the cross-linked net. In the wet state, however, Young's modulus and tensile strength of the network were reduced by less than those of PLLA since the water-absorbed NVP content was easy to stretch. Moreover, the resultant network not only exhibited no obvious cytotoxicity but also resisted the adhesion of L929 fibroblasts. Combined with Digital Light Processing (DLP) technology, the poly(l-lactide-b-N-vinyl-2-pyrrolidone) network may be widely used in the field of anti-adhesion barrier materials and/or biological anti-fouling materials with customization requirements.

The poly(l-lactide-b-N-vinyl-2-pyrrolidone) network could be formed by UV curing, and resist the adhesion of L929 fibroblasts. It could be used in the field of biological anti-fouling material with customization requirements.

A scope at antifouling strategies to prevent catheter-associated infections

The use of invasive medical devices is becoming more common nowadays, with catheters representing one of the most used medical devices. However, there is a risk of infection associated with the use of these devices, since they are made of materials that are prone to bacterial adhesion with biofilm formation, often requiring catheter removal as the only therapeutic option. Catheter-related urinary tract infections (CAUTIs) and central line-associated bloodstream infections (CLABSIs) are among the most common causes of healthcare-associated infections (HAIs) worldwide while endotracheal intubation is responsible for ventilator-associated pneumonia (VAP). Therefore, to avoid the use of biocides due to the potential risk of bacterial resistance development, antifouling strategies aiming at the prevention of bacterial adherence and colonization of catheter surfaces represent important alternative measures. This review is focused on the main strategies that are able to modify the physical or chemical properties of biomaterials, leading to the creation of antiadhesive surfaces. The most promising approaches include coating the surfaces with hydrophilic polymers, such as poly(ethylene glycol) (PEG), poly(acrylamide) and poly(acrylates), betaine-based zwitterionic polymers and amphiphilic polymers or the use of bulk-modified poly(urethanes). Natural polysaccharides and its modifications with heparin, have also been used to improve hemocompatibility. Recently developed bioinspired techniques yielding very promising results in the prevention of bacterial adhesion and colonization of surfaces include slippery liquid-infused porous surfaces (SLIPS) based on the superhydrophilic rim of the pitcher plant and the Sharklet topography inspired by the shark skin, which are potential candidates as surface-modifying approaches for biomedical devices. Concerning the potential application of most of these strategies in catheters, more in vivo studies and clinical trials are needed to assure their efficacy and safety for possible future use.

Shear Induced TiO2 Nano Structure Using Brush-Coating for Liquid Crystal Alignment

We have developed a very useful and cost-effective liquid crystal (LC) alignment layer of brush-coated TiO2 that is solution-processable for twisted nematic (TN) LC cells. TiO2 was prepared via the sol-gel method. The TiO2 solution was brush-coated on the substrate, followed by an annealing process. During the brush-coating process, a retracting force is generated on the deposited TiO solutions along the coating direction. The annealing process hardens the TiO2 and generates shearing stress arising from the retracting force along the brush-coating direction. The shearing stress created highly oriented nano/microstructure and uniformly aligned LCs with a stable pretilt angle of 0.6°. TN mode LC cells based on brush-coated TiO2 exhibited a performance of 12.5 ms of response and a threshold voltage of 1.8 V. Our brush-coated TiO2 incorporates two steps of the film deposition and alignment process into one step.

Nanoadhesive layer to prevent protein absorption in a poly(dimethylsiloxane) microfluidic device

Poly(dimethylsiloxane) (PDMS) is widely used as a microfluidics platform material; however, it absorbs various molecules, perturbing specific chemical concentrations in microfluidic channels. We present a simple solution to prevent adsorption into a PDMS microfluidic device. We used a vapor-phase-deposited nanoadhesive layer to seal PDMS microfluidic channels. Absorption of fluorescent molecules into PDMS was efficiently prevented in the nanolayer-treated PDMS device. Importantly, when cultured in a nanolayer-treated PDMS device, yeast cells exhibited the expected concentration-dependent response to a mating pheromone, including mating-specific morphological and gene expression changes, while yeast cultured in an untreated PDMS device did not properly respond to the pheromone. Our method greatly expands microfluidic applications that require precise control of molecule concentrations.

Neutrophil membranes coated, antibiotic agent loaded nanoparticles targeting to the lung inflammation

Natural cellular membranes, with the outstanding qualities of biocompatibility and specificity, have gained growing attentions in the system of drug delivery. Nanoparticles coated with cellular membranes are starting to be applied as drug-loaded-vehicles to target tumors. Here, neutrophil membranes were selected to apply in the treatment of inflammation because neutrophils can participate in various inflammatory responses and accumulate at inflammatory sites to eliminate pathogens. Through extracting neutrophil membranes from natural neutrophils without affecting their biological properties, nanoparticles loaded with sparfloxacin (SPX) were coated with these membranes and disguised as neutrophils. Compared with traditional nano-medicines, the neutrophil membrane-coated nanoparticles (NM-NP-SPX) possessed precise targeting ability just like the neutrophils could accumulate at inflammatory sites when inflammation burst. In addition, NM-NP-SPX could prolong the circulation time and had the property of controlled-release. Through in vivo experiments, we found that the concentration of three representative inflammatory cytokines in blood, bacteria and inflammatory cells in lungs of the mice with pneumonia reduced significantly in the initial 24 h after the injection of NM-NP-SPX, which meant that NM-NP-SPX could greatly reduce the risk of death for the patients with inflammation. Moreover, the infected lungs could recover rapidly without any side effects to other organs due to the low cytotoxicity of NM-NP-SPX against normal cells. Therefore, our developed drug delivery system has enormous advantages in treating inflammations. Not only that, this kind of bionic method may have greater value and application prospects in curing the inflammations arisen from cancers.

Impact of Anti-Biofouling Surface Coatings on the Properties of Nanomaterials and Their Biomedical Applications

Understanding and subsequently controlling non-specific interactions between engineered nanomaterials and biological environment have become increasingly important for further developing and advancing nanotechnology for biomedical applications. Such non-specific interactions, also known as the biofouling effect, mainly associate with the adsorption of biomolecules (such as proteins, DNAs, RNAs, and peptides) onto the surface of nanomaterials and the adhesion or uptake of nanomaterials by various cells. By altering the surface properties of nanomaterials the biofouling effect can lead to in situ changes of physicochemical properties, pharmacokinetics, functions, and toxicity of nanomaterials. This review provides discussions on the current understanding of the biofouling effect, the factors that affect the non-specific interactions associated with biofouling, and the impact of the biofouling effect on the performances and functions of nanomaterials. An overview of the development and applications of various anti-biofouling coating materials to preserve and improve the properties and functions of engineered nanomaterials for intended biomedical applications is also provided.

Microfluidic neural probes: in vivo tools for advancing neuroscience

Microfluidic neural probes hold immense potential as in vivo tools for dissecting neural circuit function in complex nervous systems. Miniaturization, integration, and automation of drug delivery tools open up new opportunities for minimally invasive implants. These developments provide unprecedented spatiotemporal resolution in fluid delivery as well as multifunctional interrogation of neural activity using combined electrical and optical modalities. Capitalizing on these unique features, microfluidic technology will greatly advance in vivo pharmacology, electrophysiology, optogenetics, and optopharmacology. In this review, we discuss recent advances in microfluidic neural probe systems. In particular, we will highlight the materials and manufacturing processes of microfluidic probes, device configurations, peripheral devices for fluid handling and packaging, and wireless technologies that can be integrated for the control of these microfluidic probe systems. This article summarizes various microfluidic implants and discusses grand challenges and future directions for further developments.

Recent advances in nonbiofouling PDMS surface modification strategies applicable to microfluidic technology

In the last decade microfabrication processes including rapid prototyping techniques have advanced rapidly and achieved a fairly mature stage. These advances have encouraged and enabled the use of microfluidic devices by a wider range of users with applications in biological separations and cell and organoid cultures. Accordingly, a significant current challenge in the field is controlling biomolecular interactions at interfaces and the development of novel biomaterials to satisfy the unique needs of the biomedical applications. Poly(dimethylsiloxane) (PDMS) is one of the most widely used materials in the fabrication of microfluidic devices. The popularity of this material is the result of its low cost, simple fabrication allowing rapid prototyping, high optical transparency, and gas permeability. However, a major drawback of PDMS is its hydrophobicity and fast hydrophobic recovery after surface hydrophilization. This results in significant nonspecific adsorption of proteins as well as small hydrophobic molecules such as therapeutic drugs limiting the utility of PDMS in biomedical microfluidic circuitry. Accordingly, here, we focus on recent advances in surface molecular treatments to prevent fouling of PDMS surfaces towards improving its utility and expanding its use cases in biomedical applications.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Fabricating Polymer Canopies onto Structured Surfaces Using Liquid Scaffolds

In this work, we study the use of initiated chemical vapor deposition in conjunction with liquid scaffolds to deposit polymer canopies onto structured surfaces. Liquid is applied to micropillar and microstructure surfaces to act as a scaffolding template such that the deposited polymer films take the shape of the liquid surface. Two methods for directing the location of the scaffolding liquid were examined. In the first method, high surface tension liquids rest in a Cassie-Baxter state over the structured surfaces, allowing for control over the canopy location and size by varying the position and volume of the liquid. In the second method, the structured surfaces are inverted onto a thin layer of low surface tension liquid, allowing the coverage and height of the canopy to be controlled by varying the area and thickness of the liquid layer. Although the canopies demonstrated in this study were fabricated using initiated chemical vapor deposition, the generality of our scaffolding method can easily be translated to other vapor deposition processes.

Anti-fouling Coatings of Poly(dimethylsiloxane) Devices for Biological and Biomedical Applications

Fouling initiated by nonspecific protein adsorption is a great challenge in biomedical applications, including biosensors, bioanalytical devices, and implants. Poly(dimethylsiloxane) (PDMS), a popular material with many attractive properties for device fabrication in the biomedical field, suffers serious fouling problems from protein adsorption due to its hydrophobic nature, which limits the practical use of PDMS-based devices. Effort has been made to develop biocompatible materials for anti-fouling coatings of PDMS. In this review, typical nonfouling materials for PDMS coatings are introduced and the associated basic anti-fouling mechanisms, including the steric repulsion mechanism and the hydration layer mechanism, are described. Understanding the relationships between the characteristics of coating materials and the accompanying anti-fouling mechanisms is critical for preparing PDMS coatings with desirable anti-fouling properties.

Near infrared (NIR) laser mediated surface activation of graphene oxide nanoflakes for efficient antibacterial, antifungal and wound healing treatment

Photothermal treatment of graphene oxide (GO) for antibacterial, antifungal and controlling the wound infection treatment using near infrared laser (NIR, Nd-YAG (λ=1064 nm) were reported. Various pathogenic bacteria (Pseudomonas aeruginosa, Staphylococcus aureus) and fungi (Saccharomyces cerevisiae and Candida utilis) were investigated. The cytotoxicity was measured using the proteomic analysis by matrix assisted laser desorption/ionization mass spectrometry (MALDI-MS), optical density (OD600), standard microdilution procedures, transmission electron microscopy (TEM) and epifluorescence microscopy. The laser mediated the surface activation of GO offer high efficiency for antifungal and antibacterial. Wide broad cells with various instruments approved that graphene oxide is promising material for nanomedicine in the near future.

Microstructure and antibacterial performance of functionalized polyurethane based on polysiloxane tethered cationic biocides

The designed polyurethane containing polysiloxanes tethered quaternary ammonium salt groups exhibited special surface migrations, low surface free energy and excellent antibacterial activity towardsEscherichia coli.

Antibiofouling polymer interfaces: poly(ethylene glycol) and other promising candidates

This review highlights antibiofouling polymer interfaces with emphasis on the latest developments using poly(ethylene glycol) and the design new polymeric structures.

A facile approach to modify poly(dimethylsiloxane) surfaces via visible light-induced grafting polymerization

We have demonstrated a simple and effective approach for the functional surface modification of poly(dimethylsiloxane) (PDMS) via visible light-induced grafting polymerization at room temperature.

Blood compatible materials: state of the art

Devices that function in contact with blood are ubiquitous in clinical medicine and biotechnology. These devices include vascular grafts, coronary stents, heart valves, catheters, hemodialysers, heart-lung bypass systems and many others. Blood contact generally leads to thrombosis (among other adverse outcomes), and no material has yet been developed which remains thrombus-free indefinitely and in all situations: extracorporeally, in the venous circulation and in the arterial circulation. In this article knowledge on blood-material interactions and "thromboresistant" materials is reviewed. Current approaches to the development of thromboresistant materials are discussed including surface passivation; incorporation and/or release of anticoagulants, antiplatelet agents and thrombolytic agents; and mimicry of the vascular endothelium.

Automated chemiluminescence immunoassay for a nonionic surfactant using a recycled spinning-pausing controlled washing procedure on a compact disc-type microfluidic platform

A fully automated and integrated chemiluminescence immunoassay, carried out on a compact disc (CD)-type microfluidic platform, for the detection of alkylphenol polyethoxylates (APnEOs) is described. The pattern of the CD-type microchip was designed so as to permit the sequential solution delivery of the sample solution, the washing solution and the luminol solution, which are required in the chemiluminescence immunoassay process, along with a designed rotation program for spinning the CD-type microchip. The procedure for flowing the washing solution, the volume of which was limited on the CD-type microchip, was optimized by using a recycled spinning-pausing rotation program to overcome the non-specific adsorption of the horseradish peroxidase labeled APnEOs at the detection area. The detection limit of the immunoassay is about 10 ppb.

Antifouling and antimicrobial polymer membranes based on bioinspired polydopamine and strong hydrogen-bonded poly(N-vinyl pyrrolidone)

A facile and versatile approach for the preparation of antifouling and antimicrobial polymer membranes has been developed on the basis of bioinspired polydopamine (PDA) in this work. It is well-known that a tightly adherent PDA layer can be generated over a wide range of material surfaces through a simple dip-coating process in dopamine aqueous solution. The resulting PDA coating is prone to be further surface-tailored and functionalized via secondary treatments because of its robust reactivity. Herein, a typical hydrophobic polypropylene (PP) porous membrane was first coated with a PDA layer and then further modified by poly(N-vinyl pyrrolidone) (PVP) via multiple hydrogen-bonding interactions between PVP and PDA. Data of water contact angle measurements showed that hydrophilicity and wettability of the membranes were significantly improved after introducing PDA and PVP layers. Both permeation fluxes and antifouling properties of the modified membranes were enhanced as evaluated in oil/water emulsion filtration, protein filtration, and adsorption tests. Furthermore, the modified membranes showed remarkable antimicrobial activity after iodine complexation with the PVP layer. The PVP layer immobilized on the membrane had satisfying long-term stability and durability because of the strong noncovalent forces between PVP and PDA coating. The strategy of material surface modification reported here is substrate-independent, and applicable to a broad range of materials and geometries, which allows effective development of materials with novel functional coatings based on the mussel-inspired surface chemistry.

Functionalization of polydimethylsiloxane membranes to be used in the production of voice prostheses

The voice is produced by the vibration of vocal cords which are located in the larynx. Therefore, one of the major consequences for patients subjected to laryngectomy is losing their voice. In these cases, a synthetic one-way valve set (voice prosthesis) can be implanted in order to allow restoration of speech. Most voice prostheses are produced with silicone-based materials such as polydimethylsiloxane (PDMS). This material has excellent properties, such as optical transparency, chemical and biological inertness, non-toxicity, permeability to gases and excellent mechanical resistance that are fundamental for its application in the biomedical field. However, PDMS is very hydrophobic and this property causes protein adsorption which is followed by microbial adhesion and biofilm formation. To overcome these problems, surface modification of materials has been proposed in this study. A commercial silicone elastomer, Sylgard^TM 184 was used to prepare membranes whose surface was modified by grafting 2-hydroxyethylmethacrylate and methacrylic acid by low-pressure plasma treatment. The hydrophilicity, hydrophobic recovery and surface energy of the produced materials were determined. Furthermore, the cytotoxicity and antibacterial activity of the materials were also assessed. The results obtained revealed that the PDMS surface modification performed did not affect the material's biocompatibility, but decreased their hydrophobic character and bacterial adhesion and growth on its surface.

Fabrication and characterization of stable hydrophilic microfluidic devices prepared via the in situ tertiary-amine catalyzed Michael addition of multifunctional thiols to multifunctional acrylates

In situ tertiary amine-catalyzed thiol-acrylate chemistry was employed to produce hydrophilic microfluidic devices via a soft lithography process. The process involved the Michael addition of a secondary amine to a multifunctional acrylate producing a nonvolatile in situ tertiary amine catalyst/comonomer molecule. The Michael addition of a multifunctional thiol to a multifunctional acrylate was facilitated by the catalytic activity of the in situ catalyst/comonomer. These cost-efficient thiol-acrylate devices were prepared at room temperature, rapidly, and with little equipment. The thiol-acrylate thermoset materials were more natively hydrophilic than the normally employed poly(dimethylsiloxane) (PDMS) thermoset material, and the surface energies were stable compared to PDMS. Because the final chip was self-adhered via a simple chemical process utilizing the same chemistry, and it was naturally hydrophilic, there was no need for expensive instrumentation or complicated methods to "activate" the surface. There was also no need for postprocessing removal of the catalyst as it was incorporated into the polymer network. These bottom-up devices were fabricated to completion proving their validity as microfluidic devices, and the materials were manipulated and characterized via various analyses illustrating the potential diversity and tunability of the devices.