Toxicity mechanism of titanium dioxide and zinc oxide nanoparticles against food pathogens

Recent advances in the use of composite titanium dioxide nanomaterials in the food industry

Titanium dioxide (TiO2 ) nanomaterials have attracted significant attention due to their good biocompatibility and potential for multifunctional applications. In the last few years, there has been growing interest in the use of TiO2 nanomaterials in the food industry. However, a systematic review of the synthesis methods, properties, and applications of TiO2 nanomaterials in the food industry is lacking. In this review, we provide a summary of the synthesis and properties of TiO2 nanomaterials and their composites, with a focus on their applications in the food industry. We also discuss the potential benefits and risks of using TiO2 nanomaterials in food applications. This review aims to promote food innovation and improve food quality and safety.

Synthesis and biological evaluation of titanium dioxide/thiopolyurethane composite: anticancer and antibacterial effects

Nanocomposites incorporating titanium dioxide (TiO2) have a significant potential for various industrial and medical applications. These nanocomposites exhibit selectivity as antimicrobial and anticancer agents. Antimicrobial activity is crucial for medical uses, including applications in food processing, packaging, and surgical instruments. Additionally, these nanocomposites exhibit selectivity as anticancer agents. A stable nanocomposite as a new anticancer and antibacterial chemical was prepared by coupling titanium dioxide nanoparticles with a polyurethane foam matrix through the thiourea group. The titanium dioxide/thiopolyurethane nanocomposite (TPU/TiO2) was synthesized from low-cost Ilmenite ore and commercial polyurethane foam. EDX analysis was used to determine the elemental composition of the titanium dioxide (TiO2) matrix. TiO2NPs were synthesized and were characterized using TEM, XRD, IR, and UV-Vis spectra. TiO2NPs and TPU foam formed a novel composite. The MTT assay assessed Cisplatin and HepG-2 and MCF-7 cytotoxicity in vitro. Its IC50 values for HepG-2 and MCF-7 were 122.99 ± 4.07 and 201.86 ± 6.82 µg/mL, respectively. The TPU/TiO2 exhibits concentration-dependent cytotoxicity against MCF-7 and HepG-2 cells in vitro. The selective index was measured against both cell lines; it showed its safety against healthy cells. Agar well-diffusion exhibited good inhibition zones against Escherichia coli (12 mm), Bacillus cereus (10 mm), and Aspergillus niger (19 mm). TEM of TPU/TiO2-treated bacteria showed ultrastructure changes, including plasma membrane detachment from the cell wall, which caused lysis and bacterial death. TPU/TiO2 can treat cancer and inhibit microbes in dentures and other items. Also, TPU/TiO2 inhibits E. coli, B. cereus, and A. niger microbial strains.

Photodynamic antibacterial application of TiO2/curcumin/hydroxypropyl-cyclodextrin and its konjac glucomannan composite films

Although photodynamic therapy (PDT) has great advantages for the treatment of bacterial infections, photosensitizers (PSs) often have many disadvantages that limit their application. Improving the shortcomings of PSs and developing efficient PDT antimicrobial materials remain serious challenges. In this study, a nanocomposite drug (TiO2/curcumin/hydroxypropyl-cyclodextrin, TiO2/Cur/HPCD) was constructed and combined with konjac glucomannan to form composite films (TiO2/Cur/HPCD films, KTCHD films). The stabilities of TiO2 and Cur were improved in the presence of HPCD. The particle size of TiO2/Cur/HPCD was approximately 33.9 nm, and the addition of TiO2/Cur/HPCD enhanced the mechanical properties of the films. Furthermore, TiO2/Cur/HPCD and KTCHD films exhibited good biocompatibility and PDT antibacterial effects. The antibacterial rate of TiO2/Cur/HPCD was 74.46 % against MRSA at 500 μg/mL and 99.998 % against E. coli at 400 μg/mL, while it was adsorbed on the surface of bacteria to improve the effectiveness of the treatment. In addition, studies in mice confirmed that TiO2/Cur/HPCD and KTCHD films can treat bacterial infections and promote wound healing, with a highest wound healing rate of 84.6 % in the KTCHD-10 films + Light group on day 12. Overall, TiO2/Cur/HPCD is a promising nano-antibacterial agent and KTCHD films have the potential to be employed as antibacterial and environment-friendly trauma dressings.

Advanced biopolymer-based edible coating technologies for food preservation and packaging

Along with the growth of the world's population that reduces the accessibility of arable land and water, demand for food, as the fundamental element of human beings, has been continuously increasing each day. This situation not only becomes a challenge for the modern food chain systems but also affects food availability throughout the world. Edible coating is expected to play a significant role in food preservation and packaging, where this technique can reduce the number of food loss and subsequently ensure more sustainable food and agriculture production through various mechanisms. This review provides comprehensive information related to the currently available advanced technologies of coating applications, which include advanced methods (i.e., nanoscale and multilayer coating methods) and advanced properties (i.e., active, self-healing, and super hydrophobic coating properties). Furthermore, the benefits and drawbacks of those technologies during their applications on foods are also discussed. For further research, opportunities are foreseen to develop robust edible coating methods by combining multiple advanced technologies for large-scale and more sustainable industrial production.

Anthelmintic efficacy evaluation and mechanism of N-methylbenzo[d]oxazol-2-amine

Parasitic roundworms cause significant sickness and mortality in animals and humans. In livestock, these nematodes have severe economic impact and result in losses in food production on a global scale. None of the currently available drugs ideally suit all treatment circumstances, and the development of drug-resistant nematode strains has become a challenge to control the infection. There is an urgent need to develop novel anthelmintic compounds. According to our previous report, N-methylbenzo[d]oxazol-2-amine (1) showed anthelmintic activity and lowest cytotoxicity. In this study, in vivo anthelmintic properties were evaluated using Trichinella spiralis infected mice. Toxicity was evaluated using the rats and mode of action using molecular docking and metabolomics approaches. The in vivo results demonstrate that a dose of 250 mg/kg reduced the T. spiralis abundance in the digestive tract by 49%. The 250 mg/kg Albendazole was served as control. The relatively low acute toxicity was categorized into chemical category 5, with an LD50 greater than 2000 mg/kg body. Molecular docking analysis showed the T. spiralis tubulin beta chain and glutamate-gated channels might not be the main targets of compound 1. Metabolomics analysis was used to explain the effects of compound 1 on the T. spiralis adult worm. The results demonstrated that compound 1 significantly up-regulated the metabolism of purine, pyrimidine and down-regulated sphingolipid metabolism. In conclusion, compound 1 could be a potential molecule for anthelmintic development. The bioavailability, pharmacokinetics, and absorption of this compound should be studied further to provide information for its future efficacy improvement.

Bioactive ZnO Nanoparticles: Biosynthesis, Characterization and Potential Antimicrobial Applications

In recent years, biosynthesized zinc oxide nanoparticles (ZnONPs) have gained tremendous attention because of their safe and non-toxic nature and distinctive biomedical applications. A diverse range of microbes (bacteria, fungi and yeast) and various parts (leaf, root, fruit, flower, peel, stem, etc.) of plants have been exploited for the facile, rapid, cost-effective and non-toxic synthesis of ZnONPs. Plant extracts, microbial biomass or culture supernatant contain various biomolecules including enzymes, amino acids, proteins, vitamins, alkaloids, flavonoids, etc., which serve as reducing, capping and stabilizing agents during the biosynthesis of ZnONPs. The biosynthesized ZnONPs are generally characterized using UV-VIS spectroscopy, TEM, SEM, EDX, XRD, FTIR, etc. Antibiotic resistance is a serious problem for global public health. Due to mutation, shifting environmental circumstances and excessive drug use, the number of multidrug-resistant pathogenic microbes is continuously rising. To solve this issue, novel, safe and effective antimicrobial agents are needed urgently. Biosynthesized ZnONPs could be novel and effective antimicrobial agents because of their safe and non-toxic nature and powerful antimicrobial characteristics. It is proven that biosynthesized ZnONPs have strong antimicrobial activity against various pathogenic microorganisms including multidrug-resistant bacteria. The possible antimicrobial mechanisms of ZnONPs are the generation of reactive oxygen species, physical interactions, disruption of the cell walls and cell membranes, damage to DNA, enzyme inactivation, protein denaturation, ribosomal destabilization and mitochondrial dysfunction. In this review, the biosynthesis of ZnONPs using microbes and plants and their characterization have been reviewed comprehensively. Also, the antimicrobial applications and mechanisms of biosynthesized ZnONPs against various pathogenic microorganisms have been highlighted.

Antibacterial Gelatin Composite Hydrogels Comprised of In Situ Formed Zinc Oxide Nanoparticles

We report the feasibility of using gelatin hydrogel networks as the host for the in situ, environmentally friendly formation of well-dispersed zinc oxide nanoparticles (ZnONPs) and the evaluation of the antibacterial activity of the as-prepared composite hydrogels. The resulting composite hydrogels displayed remarkable biocompatibility and antibacterial activity as compared to those in previous studies, primarily attributed to the uniform distribution of the ZnONPs with sizes smaller than 15 nm within the hydrogel network. In addition, the composite hydrogels exhibited better thermal stability and mechanical properties as well as lower swelling ratios compared to the unloaded counterpart, which could be attributed to the non-covalent interactions between the in situ formed ZnONPs and polypeptide chains. The presence of ZnONPs contributed to the disruption of bacterial cell membranes, the alteration of DNA molecules, and the subsequent release of reactive oxygen species within the bacterial cells. This chain of events culminated in bacterial cell lysis and DNA fragmentation. This research underscores the potential benefits of incorporating antibacterial agents into hydrogels and highlights the significance of preparing antimicrobial agents within gel networks.

Polyphenols: Natural Preservatives with Promising Applications in Food, Cosmetics and Pharma Industries; Problems and Toxicity Associated with Synthetic Preservatives; Impact of Misleading Advertisements; Recent Trends in Preservation and Legislation

The global market of food, cosmetics, and pharmaceutical products requires continuous tracking of harmful ingredients and microbial contamination for the sake of the safety of both products and consumers as these products greatly dominate the consumer's health, directly or indirectly. The existence, survival, and growth of microorganisms in the product may lead to physicochemical degradation or spoilage and may infect the consumer at another end. It has become a challenge for industries to produce a product that is safe, self-stable, and has high nutritional value, as many factors such as physical, chemical, enzymatic, or microbial activities are responsible for causing spoilage to the product within the due course of time. Thus, preservatives are added to retain the virtue of the product to ensure its safety for the consumer. Nowadays, the use of synthetic/artificial preservatives has become common and has not been widely accepted by consumers as they are aware of the fact that exposure to preservatives can lead to adverse effects on health, which is a major area of concern for researchers. Naturally occurring phenolic compounds appear to be extensively used as bio-preservatives to prolong the shelf life of the finished product. Based on the convincing shreds of evidence reported in the literature, it is suggested that phenolic compounds and their derivatives have massive potential to be investigated for the development of new moieties and are proven to be promising drug molecules. The objective of this article is to provide an overview of the significant role of phenolic compounds and their derivatives in the preservation of perishable products from microbial attack due to their exclusive antioxidant and free radical scavenging properties and the problems associated with the use of synthetic preservatives in pharmaceutical products. This article also analyzes the recent trends in preservation along with technical norms that regulate the food, cosmetic, and pharmaceutical products in the developing countries.

Antibacterial and Cytotoxic Effects of Biosynthesized Zinc Oxide and Titanium Dioxide Nanoparticles

Nanotechnology is a rapidly developing field of research that studies materials having dimensions of less than 100 nanometers. It is applicable in many areas of life sciences and medicine including skin care and personal hygiene, as these materials are the essential components of various cosmetics and sunscreens. The aim of the present study was to synthesize Zinc oxide (ZnO) and Titanium dioxide (TiO₂) nanoparticles (NPs) by using Calotropis procera (C. procera) leaf extract. Green synthesized NPs were characterized by UV spectroscopy, Fourier transform infrared (FTIR), X-ray diffraction (XRD), and Scanning Electron Microscopy (SEM) to investigate their structure, size, and physical properties. The antibacterial and synergistic effects of ZnO and TiO₂ NPs along with antibiotics were also observed against bacterial isolates. The antioxidant activity of synthesized NPs was analyzed by their α-diphenyl-β-picrylhydrazyl (DPPH) radical scavenging activity. In vivo toxic effects of the synthesized NPs were evaluated in albino mice at different doses (100, 200, and 300 mg/kg body weight) of ZnO and TiO₂ NPs administered orally for 7, 14, and 21 days. The antibacterial results showed that the zone of inhibition (ZOI) was increased in a concentration-dependent manner. Among the bacterial strains, Staphylococcus aureus showed the highest ZOI, i.e., 17 and 14 mm against ZnO and TiO₂ NPs, respectively, while Escherichia coli showed the lowest ZOI, i.e., 12 and 10 mm, respectively. Therefore, ZnO NPs are potent antibacterial agents compared to TiO₂ NPs. Both NPs showed synergistic effects with antibiotics (ciprofloxacin and imipenem). Moreover, the DPPH activity showed that ZnO and TiO₂ NPs have significantly (p > 0.05) higher antioxidant activity, i.e., 53% and 58.7%, respectively, which indicated that TiO₂ has good antioxidant potential compared to ZnO NPs. However, the histological changes after exposure to different doses of ZnO and TiO₂ NPs showed toxicity-related changes in the structure of the kidney compared to the control group. The current study provided valuable information about the antibacterial, antioxidant, and toxicity impacts of green synthesized ZnO and TiO₂ NPs, which can be influential in the further study of their eco-toxicological effects.

Facile synthesis of carbon/titanium oxide quantum dots from lignocellulose-rich mandarin orange peel extract via microwave irradiation: Synthesis, characterization and bio-imaging application

A nanohybrid prepared from the lignocellulosic residue is a feasible approach to synthesize blue light emitting fluorescent doped TiO₂ quantum dot nanocomposite (C-TiO₂ QDs) by microwave techniques using Mandarin orange (Citrus reticulata) peel powder with titanium isopropoxide precursors. With a greater orange peel colloidal medium, the structure of the TiO₂-NPs changed from a mixture of rutile and anatase phases to exclusively the anatase phase. The optical and morphological properties of as-prepared C-TiO₂ QDs were characterized by HR-TEM, XRD, FT-IR, UV-visible, PL spectra, DLS, and Zeta potential techniques. The reaction condition was optimized by changing substrate composition, pH, and reaction time. C-TiO₂ QDs exhibit outstanding stability at pH 7 and remain sustained for at least 180 days without aggregation. As prepared C-TiO₂ QDs have distinct emission and excitation activities with an average particle size of 2.8 nm. Cell viability was performed on normal L929 cells, where it showed excellent biocompatibility (<90 %) even at the concentration of 200 μg/mL after 24 h treatment. Additionally, the synthesized C-TiO₂ QDs were used with L929 cells as a fluorescent probe for bio-imaging applications. The results revealed that neither of the cell lines' morphologies had significantly changed, proving the biocompatibility of the synthetic C-TiO₂ QDs.

Nanoparticles as Drug Delivery Systems: A Review of the Implication of Nanoparticles' Physicochemical Properties on Responses in Biological Systems

In the last four decades, nanotechnology has gained momentum with no sign of slowing down. The application of inventions or products from nanotechnology has revolutionised all aspects of everyday life ranging from medical applications to its impact on the food industry. Nanoparticles have made it possible to significantly extend the shelf lives of food product, improve intracellular delivery of hydrophobic drugs and improve the efficacy of specific therapeutics such as anticancer agents. As a consequence, nanotechnology has not only impacted the global standard of living but has also impacted the global economy. In this review, the characteristics of nanoparticles that confers them with suitable and potentially toxic biological effects, as well as their applications in different biological fields and nanoparticle-based drugs and delivery systems in biomedicine including nano-based drugs currently approved by the U.S. Food and Drug Administration (FDA) are discussed. The possible consequence of continuous exposure to nanoparticles due to the increased use of nanotechnology and possible solution is also highlighted.

New approaches for enhancing the photosensitivity, antibacterial activity, and controlled release behavior of non-porous silica-titania nanoplatforms

This research presents a new approach for the synthesis of inorganic nano-platforms containing >2 layers. Nano-platforms were characterized using scanning electron microscopy, X-ray diffraction, fluorescence and Fourier transform infrared spectroscopy, fluorescence microscopy, dynamic light scattering, thermogravimetric analysis, Brunauer-Emmett-Teller, etc. Since it has been reported that the maximum tolerable dose of non-porous silica nanoparticles (NPs) in in-vivo studies is higher than that of mesoporous silica, the non-porous silica was prepared. Curcumin (CUR) was trapped between the surfaces of the spherical non-porous silica and titania NPs (<100 nm) as both fluorescent and therapeutic agents, thus resulting in increased loading capacity of the non-porous silica NPs, as well as providing significant photosensitivity, antibacterial activity, and controlled release. In addition, the surface of NPs was enriched with Methyl violet-10B (MV-10B), and Rhodamine B (RhB). Silica@CUR@titania exhibited approximately 9-fold higher fluorescence intensity than silica@CUR NPs. This finding enabled us to design nano-platforms with minimum toxic effect due to low contents of RhB for bioimaging applications. The antimicrobial efficiency of nano-platforms was evaluated against P. aeruginosa, E. coli, S. typhimurium, K. pneumonia, S. epidermidis, S. aureus, B. subtilis, B. cereus, and E. faecalis. It was concluded that titania markedly lowered the minimum inhibitory concentration values (MICs) of CUR against all bacteria except B. subtilis and P. aeruginosa. Theoretical simulation was also performed to clarify the accumulation of functionalized NPs in tumor tissue.

Current and future interventions for improving poultry health and poultry food safety and security: A comprehensive review

Poultry is thriving across the globe. Chicken meat is the most preferred poultry worldwide, and its popularity is increasing. However, poultry also threatens human hygiene, especially as a fomite of infectious diseases caused by the major foodborne pathogens (Campylobacter, Salmonella, and Listeria). Preventing pathogenic bacterial biofilm is crucial in the chicken industry due to increasing food safety hazards caused by recurring contamination and the rapid degradation of meat, as well as the increased resistance of bacteria to cleaning and disinfection procedures commonly used in chicken processing plants. To address this, various innovative and promising strategies to combat bacterial resistance and biofilm are emerging to improve food safety and quality and extend shelf-life. In particular, natural compounds are attractive because of their potential antimicrobial activities. Natural compounds can also boost the immune system and improve poultry health and performance. In addition to phytochemicals, bacteriophages, nanoparticles, coatings, enzymes, and probiotics represent unique and environmentally friendly strategies in the poultry processing industry to prevent foodborne pathogens from reaching the consumer. Lactoferrin, bacteriocin, antimicrobial peptides, cell-free supernatants, and biosurfactants are also of considerable interest for their prospective application as natural antimicrobials for improving the safety of raw poultry meat. This review aims to describe the feasibility of these proposed strategies and provide an overview of recent published evidences to control microorganisms in the poultry industry, considering the human health, food safety, and economic aspects of poultry production.

Phytochemical-assisted Synthesis of Titania Nanoparticles using Azadirachta indica Leaf Extract as Photocatalyst in the Photodegradation of Methyl Orange

The biosynthesis procedure for nanomaterial preparation is a promising alternative due to its simplicity and environmental friendliness. In this work, TiO2 NPs were biosynthesized using the aqueous leaf extract of Azadirachta indica. The influence of the extract volumes, solvents, and acetic acid on the properties of TiO2 NPs was studied. Phytochemical screening and ATR-FTIR spectrum confirmed the presence of phenolic compounds in the leaf extract. XRD patterns showed that the samples were mainly in the anatase phase. However, for the water-based samples and when 1 and 2 mL of extract volumes were used, anatase/brookite mixture was observed. FESEM images displayed almost spherical and agglomerated NPs. UV-Vis-NIR studies showed that the samples’ bandgaps values are within the range of anatase TiO2. The photocatalytic activity of the TiO2 NPs was evaluated in the photodegradation of methyl orange (MO) under UV light irradiation. The water-based sample synthesized using 2 mL of the extract achieved 98.62% of MO degradation within 270 min and demonstrated the highest pseudo-first-order photodegradation kinetic constant of 0.0147 min-1. These results indicate that the use of the plant-based biosynthesis method with water as the solvent successfully produced TiO2 NPs with good physicochemical properties and photocatalytic activity in the photodegradation of organic dye. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Prospects on Tuning Bioactive and Antimicrobial Denture Base Resin Materials: A Narrative Review

Denture base resin (DBR) materials are used in dentistry in constructing removable dentures and implant-supported prostheses. A plethora of evidence has demonstrated that DBR materials are associated with a high risk of denture stomatitis, a clinical complication where the soft oral tissues underneath the resin-based material are inflamed. The prevalence of denture stomatitis among denture wearers is high worldwide. Plaque accumulation and the infiltration of oral microbes into DBRs are among the main risk factors for denture stomatitis. The attachment of fungal species, mainly Candida albicans, to DBRs can irritate the underneath soft tissues, leading to the onset of the disease. As a result, several attempts were achieved to functionalize antimicrobial compounds and particles into DBRs to prevent microbial attachment. This review article explored the advanced approaches in designing bioactive and antimicrobial DBR materials. It was reported that using monomer mixtures, quaternary ammonium compounds (QACs), and organic and inorganic particles can suppress the growth of denture stomatitis-related pathogens. This paper also highlighted the importance of characterizing bioactive DBRs to be mechanically and physically sustainable. Future directions may implement a clinical translational model to attempt these materials inside the oral cavity.

Antibacterial Effects of ZnO Nanodisks: Shape Effect of the Nanostructure on the Lethality in Escherichia coli

The role of the shape of the nanostructure on the antibacterial effects of ZnO nanodisks has been investigated by detailed mass spectrometry-based proteomics along with other spectroscopic and microscopic studies on E. coli. The primary interaction study of the E. coli cells in the presence of ZnO nanodisks showed rigorous cell surface damage disrupting the cell wall/membrane components detected by microscopic and ATR-FTIR studies. Protein profiling of whole-cell extracts in the presence and absence of ZnO nanodisks identified several proteins that are upregulated and downregulated under the stress of the nanodisks. This suggests that the bacterial response to the primary stress leads to a secondary impact of ZnO nanodisk toxicity via regulation of the expression of specific proteins. Results showed that the ZnO nanodisks lead to the over-expression of peptidyl-dipeptidase Dcp, Transketolase-1, etc., which are important to maintaining the osmotic balance in the cell. The abrupt change in osmotic pressure leads to mechanical injury to the membrane, and nutritional starvation conditions, which is revealed from the expression of the key proteins involved in membrane-protein assembly, maintaining membrane integrity, cell division processes, etc. Thus, indicating a deleterious effect of ZnO nanodisk on the protective layer of E. coli. ZnO nanodisks seem to primarily affect the protective membrane layer, inducing cell death via the development of osmotic shock conditions, as one of the possible reasons for cell death. These results unravel a unique behavior of the disk-shaped ZnO nanostructure in executing lethality in E. coli, which has not been reported for other known shapes or morphologies of ZnO nanoforms.

Recent Advances in Nanotechnology for the Management of Klebsiella pneumoniae-Related Infections

Klebsiella pneumoniae is an important human pathogen that causes diseases such as urinary tract infections, pneumonia, bloodstream infections, bacteremia, and sepsis. The rise of multidrug-resistant strains has severely limited the available treatments for K. pneumoniae infections. On the other hand, K. pneumoniae activity (and related infections) urgently requires improved management strategies. A growing number of medical applications are using nanotechnology, which uses materials with atomic or molecular dimensions, to diagnose, eliminate, or reduce the activity of different infections. In this review, we start with the traditional treatment and detection method for K. pneumoniae and then concentrate on selected studies (2015-2022) that investigated the application of nanoparticles separately and in combination with other techniques against K. pneumoniae.

Perinatal exposure to foodborne inorganic nanoparticles: A role in the susceptibility to food allergy?

Food allergy (FA) is an inappropriate immune response against dietary antigens. Various environmental factors during perinatal life may alter the establishment of intestinal homeostasis, thereby predisposing individuals to the development of such immune-related diseases. Among these factors, recent studies have emphasized the chronic dietary exposure of the mother to foodborne inorganic nanoparticles (NP) such as nano-sized silicon dioxide (SiO₂), titanium dioxide (TiO₂) or silver (Ag). Indeed, there is growing evidence that these inorganic agents, used as food additives in various products, as processing aids during food manufacturing or in food contact materials, can cross the placental barrier and reach the developing fetus. Excretion in milk is also suggested, hence continuing to expose the neonate during a critical window of susceptibility. Due to their immunotoxical and biocidal properties, such exposure may disrupt the host-intestinal microbiota's beneficial exchanges and may interfere with intestinal barrier and gut-associated immune system development in fetuses then the neonates. The resulting dysregulated intestinal homeostasis in the infant may significantly impede the induction of oral tolerance, a crucial process of immune unresponsiveness to food antigens. The current review focuses on the possible impacts of perinatal exposure to foodborne NP during pregnancy and early life on the susceptibility to developing FA.

Enhanced Antimicrobial Cellulose/Chitosan/ZnO Biodegradable Composite Membrane

In this study, chitosan and sugarcane cellulose were used as film-forming materials, while the inorganic agent zinc oxide (ZnO) and natural compound phenyllactic acid (PA) were used as the main bacteriostatic components to fabricate biodegradable antimicrobial composite membranes. The water absorption and antimicrobial properties were investigated by adjusting the concentration of PA. The scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) results demonstrated that the components of the composite membrane were successfully integrated. The addition of ZnO improved the mechanical and antimicrobial properties of the composite membrane, while the addition of PA with high crystallinity significantly reduced the water absorption and swelling. Moreover, the addition of 0.5% PA greatly improved the water absorption of the composite membrane. The results of antimicrobial experiments showed that PA improved the antimicrobial activity of the composite membrane against Staphylococcus aureus, Escherichia coli, Aspergillus niger and Penicillium rubens. Among them, 0.3% PA had the best antimicrobial effect against S. aureus, E. coli and A. niger, while 0.7% PA had the best antimicrobial effect against P. rubens.

On the incorporation of nano TiO2to inhibit concrete deterioration in the marine environment

To develop high deterioration resistance concrete for marine infrastructures, two types of nano TiO₂(NT) including anatase phase NT and silica surface-treated rutile phase NT were incorporated into concrete. The fabricated NT modified concrete was then put into the marine environment for 21 months in this study. The effects and mechanisms of two types of NT on the deterioration of concrete in the marine environment were investigated from three aspects, including seawater physical and biological as well as chemical actions on concrete with NT. Under the seawater physical action, the exposed degree of coarse sand particles on the surface of control concrete is greater than that of concrete with NT. Owing to the microorganism biodegradation property of NT, the elimination and inhibition rates of concrete with NT on microorganisms can reach up to 76.98% and 96.81%, respectively. In addition, the surface biofilm thickness of concrete can be reduced by 49.13% due to the inclusion of NT. In the aspect of seawater chemical action, NT can increase the pH value inside concrete by 0.81, increase the degree of polymerization of C-S-H gel, and improve the interfacial transition zone between cement paste and aggregate in concrete. Compared to anatase phase NT, silica surface-treated rutile phase NT is more effective in improving the deterioration resistance of concrete in the marine environment. It can be concluded that incorporating NT can inhibit the deterioration of concrete in the marine environment.

ZnO nanoparticles alter redox metabolism of Limnoperna fortunei

Nanoparticles such as zinc oxide nanoparticles (ZnO-NP) that are incorporated in consumer and industrial products have caused concern about their potential ecotoxicological impact when released into the environment. Bivalve mollusks are susceptible targets for nanoparticle toxicity since nanomaterials can enter the cells by endocytosis mechanisms. The aim of this study was to evaluate the influence of ZnO-NP on the redox metabolism in Limnoperna fortunei and the DNA damage after exposure to ZnO-NP. Adult bivalves were incubated with 1-, 10-, and 50-μg mL^-1 ZnO-NP for 2, 4, and 24 h. Ionic Zn release, enzymatic and non-enzymatic antioxidant activity, oxidative damage, and DNA damage were evaluated. Oxidative damage to proteins and lipids were observed after 4-h exposure and returned to baseline levels after 24 h. Superoxide dismutase levels decreased after 4-h exposure and increased after 24 h. No significant alteration was observed in the catalase activity or even DNA double-strand cleavage. The dissociation of ZnO may occur after 24 h, releasing ionic zinc (Zn²⁺) by hydrolysis, which was confirmed by the increase in the ionic Zn concentration following 24-h exposure. In conclusion, ZnO-NP were able to induce oxidative stress in exposed golden mussels. The golden mussel can modulate its own antioxidant defenses in response to oxidative stress and seems to be able to hydrolyze the nanoparticles and consequently, release Zn²⁺ into the cellular compartment.

Factors Conditioning the Potential Effects TiO2 NPs Exposure on Human Microbiota: a Mini-Review

The recent years have seen a significant interest in the applications of nanotechnology in various facets of our lives. Due to their increasingly widespread use, human exposure to nanoparticles (NPs) is fast becoming unavoidable. Among the wide group of nanoparticles currently employed in industry, titanium dioxide nanoparticles, TiO₂ NPs, are particularly popular. Due to its white colour, TiO₂ is widely used as a whitening food additive (E 171). Yet, there have been few studies aimed at determining its direct impact on bacteria, while the available data suggest that TiO₂ NPs may influence microbiota causing problems such as inflammatory bowel disease, obesity, or immunological disorders. Indeed, there are increasing concerns that its presence may lead to intestinal barrier impairment, including dysbiosis of intestinal microbiota. This article aims to present an overview of studies conducted to date with regard to the impact of TiO₂ NPs on human microbiota as well as factors that can affect the same. Such information is necessary if we are to conclusively determine the potential toxicity of inorganic nanoparticles.

Promising strategies to control persistent enemies: Some new technologies to combat biofilm in the food industry-A review

Biofilm is an advanced form of protection that allows bacterial cells to withstand adverse environmental conditions. The complex structure of biofilm results from genetic-related mechanisms besides other factors such as bacterial morphology or substratum properties. Inhibition of biofilm formation of harmful bacteria (spoilage and pathogenic bacteria) is a critical task in the food industry because of the enhanced resistance of biofilm bacteria to stress, such as cleaning and disinfection methods traditionally used in food processing plants, and the increased food safety risks threatening consumer health caused by recurrent contamination and rapid deterioration of food by biofilm cells. Therefore, it is urgent to find methods and strategies for effectively combating bacterial biofilm formation and eradicating mature biofilms. Innovative and promising approaches to control bacteria and their biofilms are emerging. These new approaches range from methods based on natural ingredients to the use of nanoparticles. This literature review aims to describe the efficacy of these strategies and provide an overview of recent promising biofilm control technologies in the food processing sector.

Label-free cell based impedance measurements of ZnO nanoparticles-human lung cell interaction: a comparison with MTT, NR, Trypan blue and cloning efficiency assays

Background

There is a huge body of literature data on ZnOnanoparticles (ZnO NPs) toxicity. However, the reported results are seen to be increasingly discrepant, and deep comprehension of the ZnO NPs behaviour in relation to the different experimental conditions is still lacking. A recent literature overview emphasizes the screening of the ZnO NPs toxicity with more than one assay, checking the experimental reproducibility also versus time, which is a key factor for the robustness of the results. In this paper we compared high-throughput real-time measurements through Electric Cell-substrate Impedance-Sensing (ECIS®) with endpoint measurements of multiple independent assays.

Results

ECIS-measurements were compared with traditional cytotoxicity tests such as MTT, Neutral red, Trypan blue, and cloning efficiency assays. ECIS could follow the cell behavior continuously and noninvasively for days, so that certain long-term characteristics of cell proliferation under treatment with ZnO NPs were accessible. This was particularly important in the case of pro-mitogenic activity exerted by low-dose ZnO NPs, an effect not revealed by endpoint independent assays. This result opens new worrisome questions about the potential mitogenic activity exerted by ZnO NPs, or more generally by NPs, on transformed cells. Of importance, impedance curve trends (morphology) allowed to discriminate between different cell death mechanisms (apoptosis vs autophagy) in the absence of specific reagents, as confirmed by cell structural and functional studies by high-resolution microscopy. This could be advantageous in terms of costs and time spent. ZnO NPs-exposed A549 cells showed an unusual pattern of actin and tubulin distribution which might trigger mitotic aberrations leading to genomic instability.

Conclusions

ZnO NPs toxicity can be determined not only by the intrinsic NPs characteristics, but also by the external conditions like the experimental setting, and this could account for discrepant data from different assays. ECIS has the potential to recapitulate the needs required in the evaluation of nanomaterials by contributing to the reliability of cytotoxicity tests. Moreover, it can overcome some false results and discrepancies in the results obtained by endpoint measurements. Finally, we strongly recommend the comparison of cytotoxicity tests (ECIS, MTT, Trypan Blue, Cloning efficiency) with the ultrastructural cell pathology studies.

Graphic Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-021-01033-w.

Novel Bio-Based Materials and Applications in Antimicrobial Food Packaging: Recent Advances and Future Trends

Food microbial contamination not only poses the problems of food insecurity and economic loss, but also contributes to food waste, which is another global environmental problem. Therefore, effective packaging is a compelling obstacle for shielding food items from outside contaminants and maintaining its quality. Traditionally, food is packaged with plastic that is rarely recyclable, negatively impacting the environment. Bio-based materials have attracted widespread attention for food packaging applications since they are biodegradable, renewable, and have a low carbon footprint. They provide a great opportunity to reduce the extensive use of fossil fuels and develop food packaging materials with good properties, addressing environmental problems and contributing significantly to sustainable development. Presently, the developments in food chemistry, technology, and biotechnology have allowed us to fine-tune new methodologies useful for addressing major safety and environmental concerns regarding packaging materials. This review presents a comprehensive overview of the development and potential for application of new bio-based materials from different sources in antimicrobial food packaging, including carbohydrate (polysaccharide)-based materials, protein-based materials, lipid-based materials, antibacterial agents, and bio-based composites, which can solve the issues of both environmental impact and prevent foodborne pathogens and spoilage microorganisms. In addition, future trends are discussed, as well as the antimicrobial compounds incorporated in packaging materials such as nanoparticles (NPs), nanofillers (NFs), and bio-nanocomposites.

Synthesis of silver nanoparticles conjugated with kaempferol and hydrocortisone and an evaluation of their antibacterial effects

Silver nanoparticles (AgNPs) have shown a wide range of antibacterial activities over the last 2 decades. Conjugated AgNPs have attracted much interest among researchers for their properties which allow alterations of their physicochemical and biological properties. In this study, two potential stabilizing agents, flavonoids (kaempferol) and corticosteroids (hydrocortisone), were employed in the preparation of silver conjugated kaempferol and hydrocortisone nanoparticles (i.e., KH-AgNPs). The as-synthesized KH-AgNPs demonstrated a uniform spherical morphology by the transmission electron microscopy (TEM) results along with excellent stability and also shown strong bactericidal properties against different bacterial strains, including Escherichia coli, Bacillus subtilis, and Staphylococcus aureus. The KH-AgNPs were characterized by UV-Visible and FTIR spectroscopy studies and powder X-ray diffraction analysis. The KH-AgNPs activity was further analyzed by reactive oxygen species, live/dead bacterial assays, lactate dehydrogenase, and lipid peroxidation assays. The results have demonstrated the better antibacterial efficacy of the nanoparticles.

Zinc oxide nanoparticles: potential effects on soil properties, crop production, food processing, and food quality

The use of zinc oxide nanoparticles (ZnO NPs) is expected to increase soil fertility, crop productivity, and food quality. However, the potential effects of ZnO NP utilization should be deeply understood. This review highlights the behavior of ZnO NPs in soil and their interactions with the soil components. The review discusses the potential effects of ZnO NPs on plants and their mechanisms of action on plants and how these mechanisms are related to their physicochemical properties. The impact of current applications of ZnO NPs in the food industry is also discussed. Based on the literature reviewed, soil properties play a vital role in dispersing, aggregation, stability, bioavailability, and transport of ZnO NPs and their release into the soil. The transfer of ZnO NPs into the soil can affect the soil components, and subsequently, the structure of plants. The toxic effects of ZnO NPs on plants and microbes are caused by various mechanisms, mainly through the generation of reactive oxygen species, lysosomal destabilization, DNA damage, and the reduction of oxidative stress through direct penetration/liberation of Zn2+ ions in plant/microbe cells. The integration of ZnO NPs in food processing improves the properties of the relative ZnO NP-based nano-sensing, active packing, and food/feed bioactive ingredients delivery systems, leading to better food quality and safety. The unregulated/unsafe discharge concentrations of ZnO NPs into the soil, edible plant tissues, and processed foods raise environmental/safety concerns and adverse effects. Therefore, the safety issues related to ZnO NP applications in the soil, plants, and food are also discussed.

Determination of the LD50 with the chick embryo chorioallantoic membrane (CAM) assay as a promising alternative in nanotoxicological evaluation

Toxicity tests in rodents are still considered a controversial topic concerning their ethical justifiability. The chick embryo chorioallantoic membrane (CAM) assay may offer a simple and inexpensive alternative. The CAM assay is easy to perform and has low bureaucratic hurdles. At the same time, the CAM assay allows the application of a broad variety of analytical methods in the field of nanotoxicological research. We evaluated the CAM assay as a methodology for the determination of nanotoxicity. Therefore we calculated the median lethal dose (LD₅₀), performed in vivo microscopy and immunohistochemistry to identify organ-specific accumulation profiles, potential organ damage, and the kinetics of the in vivo circulation of the nanoparticles. Zinc oxide nanoparticles were intravascularly injected on day 10 of the egg development and showed an LD₅₀ of 17.5 µM (1.4 µg/mL_eggcontent). In comparison, the LD₅₀ of equivalent amounts of Zn²⁺ was 4.6 µM (0.6 µg/mL_eggcontent). Silica encapsulated ZnO@SiO₂ nanoparticles conjugated with fluorescein circulated in the bloodstream for at least 24 h. Particles accumulated mostly in the liver and kidney. In immunohistochemical staining, organ damage was detected only in liver tissue after intravascular injection of zinc oxide nanoparticles in very high concentrations. Zinc oxide nanoparticles showed a different pharmacokinetic profile compared to Zn²⁺ ions. In conclusion, the CAM assay has proven to be a promising methodology for evaluating nanotoxicity and for the assessment of the in vivo accumulation profiles of nanoparticles. These findings may qualify the methodology for risk assessment of innovative nanotherapeutics in the future.

Biopersistence rate of metallic nanoparticles in the gastro-intestinal human tract (stage 0 of the EFSA guidance for nanomaterials risk assessment)

The European Food Safety Authority has published a guidance regarding risk assessment of nanomaterials in food and feed. Following these recommendations, an in vitro gastrointestinal digestion has been applied to study the biopersistence of TiO₂ and Ag NPs in standards, molluscs and surimi. TiO₂ NPs standards and TiO₂ NPs/ TiO₂ microparticles from E171 were not found to be degraded. Ag NPs proved to be more degradable than TiO₂ NPs, but the biopersistence rates were higher than 12%, which means that Ag NPs are also biopersistent. Findings for seafood are quite similar to those obtained for TiO₂ NPs and Ag NPs standards, although the calculation of the biopersistence rate proposed by the EFSA was not found to be straightforward for foodstuff (the use of the NPs concentration in the sample instead of the NPs concentration at initial time (sample mixed with the gastric solution before enzymatic hydrolysis) has been proposed.

Cellular Uptake and Toxicological Effects of Differently Sized Zinc Oxide Nanoparticles in Intestinal Cells

Due to their beneficial properties, the use of zinc oxide nanoparticles (ZnO NP) is constantly increasing, especially in consumer-related areas, such as food packaging and food additives, which is leading to an increased oral uptake of ZnO NP. Consequently, the aim of our study was to investigate the cellular uptake of two differently sized ZnO NP (<50 nm and <100 nm; 12–1229 µmol/L) using two human intestinal cell lines (Caco-2 and LT97) and to examine the possible resulting toxic effects. ZnO NP (<50 nm and <100 nm) were internalized by both cell lines and led to intracellular changes. Both ZnO NP caused time- and dose-dependent cytotoxic effects, especially at concentrations of 614 µmol/L and 1229 µmol/L, which was associated with an increased rate of apoptotic and dead cells. ZnO NP < 100 nm altered the cell cycle of LT97 cells but not that of Caco-2 cells. ZnO NP < 50 nm led to the formation of micronuclei in LT97 cells. The Ames test revealed no mutagenicity for both ZnO NP. Our results indicate the potential toxicity of ZnO NP after oral exposure, which should be considered before application.

Antimicrobial activities of chitosan/titanium dioxide composites as a biological nanolayer for food preservation: A review

Packaging is an integral part of food industry that preserves the properties of food during storage. Food spoilage caused by foodborne microorganisms is a public health problem that imposes a significant burden on the healthcare systems. Moreover, packaging based on artificial and chemical materials such as plastic is destructive to the environment. Chitosan can be categorized as an active food packaging material because of its inherent antimicrobial properties and capacity to carry various active components. Combining chitosan and metallic nanoparticles can be used as a practical approach in antimicrobial packaging systems. This strategy has advantages of thermal stability, barrier properties, antioxidant and antimicrobial packaging. Titanium dioxide is one of these nanoparticles that plays a photocatalytic role by releasing reactive oxygen species, thereby leading to the destruction of microorganisms' cell wall and extension of food shelf life. This review elaborates on the antimicrobial applications of chitosan/titanium dioxide nanoparticles films in food packaging systems.

Food preservation techniques and nanotechnology for increased shelf life of fruits, vegetables, beverages and spices: a review

Food wastage is a major issue impacting public health, the environment and the economy in the context of rising population and decreasing natural resources. Wastage occurs at all stages from harvesting to the consumer, calling for advanced techniques of food preservation. Wastage is mainly due to presence of moisture and microbial organisms present in food. Microbes can be killed or deactivated, and cross-contamination by microbes such as the coronavirus disease 2019 (COVID-19) should be avoided. Moisture removal may not be feasible in all cases. Preservation methods include thermal, electrical, chemical and radiation techniques. Here, we review the advanced food preservation techniques, with focus on fruits, vegetables, beverages and spices. We emphasize electrothermal, freezing and pulse electric field methods because they allow both pathogen reduction and improvement of nutritional and physicochemical properties. Ultrasound technology and ozone treatment are suitable to preserve heat sensitive foods. Finally, nanotechnology in food preservation is discussed.

Therapeutic Potential Assessment of Green Synthesized Zinc Oxide Nanoparticles Derived from Fennel Seeds Extract

PURPOSE

To study the cytotoxic evaluation, antimicrobial and confocal analysis of zinc oxide nanoparticles (ZnO NPs) obtained from a novel plant product fennel (Foeniculum vulgare Mill.) seed extract (FSE).

METHODS

ZnO NPs were analyzed using UV-Vis spectroscopy, XRD, FTIR, TEM and EDX techniques. The MTT cell cytotoxicity assay measured the proliferation and survival of MCF-7 cells treated at different concentrations of FSE-derived ZnO NPs. The antimicrobial activity towards pathogenic bacteria and yeast strains was investigated.

RESULTS

The UV-Vis spectra showed two peaks at 438 nm and 446 nm, confirming nanoparticle formation. The SEM morphology results showed porous ranging from 23-51 nm. The antitumor activity value (IC50) was at 50 µg/mL and 100 µg/mL. Besides, morphological changes of MCF-7, cells treated at different concentrations of FSE of ZnO NPs were observed in cell cultures transfected with a transient pCMV6-XL4-GFP-expressing vector containing C-terminal domain GFP-tagged proteins, which resulted in an apoptotic effect. Antimicrobial IZ ranged up No Inhibition to 18.00 ± 0.4. The IZ revealed at the highest concentration was E. faecium VRE and yeast Cryptococcus sp. (18.00 ± 0.4. mm), followed by S. aureus (17.00 ± 0.2 mm) and P. aeruginosa and the yeast C. parapsilosis (16 ± 0.4 mm). The IZ was equal to that caused by the nystatin to Cryptococcus sp., which was significantly highest than ampicillin treatments of S. aureus, P. aeruginosa, C. albicans, and C. parapsilosis. The MIC value of the FSE-derived ZnO NPs tested against E.faecium and C.albicans was 6.00 µg/mL (E. faecium and C. albicans). It was 32.00 µg/mL (S. aureus, S. typhimurium and Cryptococcus sp.), 64.00 µg/mL (P. aeruginosa), and 128 µg/mL (C. parapsilosis).

CONCLUSION

As far as it is to our knowledge, this study established, for the first time, the biological activities of biosynthesized ZnO NPs from FSE and their synergistic therapeutic potential.

Encapsulation of Hydrophobic Drugs in Shell-by-Shell Coated Nanoparticles for Radio-and Chemotherapy-An In Vitro Study

Our research objective was to develop novel drug delivery vehicles consisting of TiO₂ and Al₂O₃ nanoparticles encapsulated by a bilayer shell that allows the reversible embedment of hydrophobic drugs. The first shell is formed by covalent binding of hydrophobic phosphonic acid at the metal oxide surface. The second shell composed of amphiphilic sodium dodecylbenzenesulfonate emerges by self-aggregation driven by hydrophobic interactions between the dodecylbenzene moiety and the hydrophobic first shell. The resulting double layer provides hydrophobic pockets suited for the intake of hydrophobic drugs. The nanoparticles were loaded with the anticancer drugs quercetin and 7-amino-4-methylcoumarin. Irradiation with X-rays was observed to release the potential anticancer drugs into the cytoplasm. In Michigan Cancer Foundation (MCF)-10 A cells, quercetin and 7-amino-4-methylcoumarin acted as antioxidants by protecting the non-tumorigenic cells from harmful radiation effects. In contrast, these agents increased the reactive oxygen species (ROS) formation in cancerous MCF-7 cells. Quercetin and 7-amino-4-methylcoumarin were shown to induce apoptosis via the mitochondrial pathway in cancer cells by determining an increase in TUNEL-positive cells and a decrease in mitochondrial membrane potential after irradiation. After X-ray irradiation, the survival fraction of MCF-7 cells with drug-loaded nanoparticles considerably decreased, which demonstrates the excellent performance of the double-layer stabilized nanoparticles as drug delivery vehicles.

Recent Advances in Nanotechnology-Aided Materials in Combating Microbial Resistance and Functioning as Antibiotics Substitutes

The ongoing escalation of drug-resistant bacteria creates the leading challenges for human health. Current predictions show that deaths due to bacterial illness will be more in comparison to cancer in 2050. Irrational use of antibiotics, prolonged regimen and using as a prophylactic treatment for various infections are leading cause of microbial resistance. It is an emerging approach to introduce evolving nanomaterials (NMs) as a base of antibacterial therapy to overcome the bacterial resistance pattern. NMs can implement several bactericidal ways and turn into a challenge for bacteria to survive and develop resistance against NMs. All the pathways depend on the surface chemistry, shape, core material and size of NMs. Because of these reasons, NMs based stuff shows a critical role in advancing the treatment efficiency by interacting with the cellular system of bacteria and functioned as an antibiotic substitute. We divided this review into two sections. The first part highlights the development of microbial resistance to antibiotics and their mechanisms. The second section details the NMs mechanisms to combat antibiotic resistance. In short, we try to summarize the advances in NMs role to deal with microbial resistance and giving solution as antibiotics substitute.

Effects of ZnO nanoparticles on aerobic denitrifying bacteria Enterobacter cloacae strain HNR

The aerobic denitrification process is a promising and cost-effective alternative to the conventional nitrogen removal process. Widely used ZnO nanoparticles (NPs) will inevitably reach wastewater treatment plants, and cause adverse impacts on aerobic denitrification and nitrogen removal. Therefore, a full understanding of the responses and adaption of aerobic denitrifiers to ZnO NPs is essential to develop effective strategies to reduce adverse effects on wastewater treatment. In this study, the responses and adaption to ZnO NPs were investigated of a wild type strain (WT) and a resistant type strain (Re) of aerobic denitrifying bacteria Enterobacter cloacae strain HNR. When exposed to 0.75 mM ZnO NPs, the nitrate removal efficiency of Re was 11.2% higher than that of WT. To prevent ZnO NPs entering cells by adsorption, the production of extracellular polymeric substances (EPS) of WT and Re strains increased 13.2% and 43.9%, respectively. The upregulations of amino sugar and carbohydrate-related metabolism contributed to the increase of EPS production, and the increased nitrogen metabolism contributed to higher activities of nitrate and nitrite reductases. Interestingly, cationic antimicrobial peptide resistance contributed to resist Zn (II) released by ZnO NPs, and many antioxidative stress-related metabolism pathways were upregulated to resist the oxidative stress resulting from ZnO NPs. These findings will guide efforts to improve the aerobic denitrification process in an environment polluted by NPs, and promote the application of aerobic denitrification technologies.

Applicability of Agro-Industrial By-Products in Intelligent Food Packaging

Nowadays, technological advancement is in continuous development in all areas, including food packaging, which tries to find a balance between consumer preferences, environmental safety, and issues related to food quality and control. The present paper concretely details the concepts of smart, active, and intelligent packaging and identifies commercially available examples used in the food packaging market place. Along with this purpose, several bioactive compounds are identified and described, which are compounds that can be recovered from the by-products of the food industry and can be integrated into smart food packaging supporting the “zero waste” activities. The biopolymers obtained from crustacean processing or compounds with good antioxidant or antimicrobial properties such as carotenoids extracted from agro-industrial processing are underexploited and inexpensive resources for this purpose. Along with the main agro-industrial by-products, more concrete examples of resources are presented, such as grape marc, banana peels, or mango seeds. The commercial and technological potential of smart packaging in the food industry is undeniable and most importantly, this paper highlights the possibility of integrating the by-products derived compounds to intelligent packaging elements (sensors, indicators, radio frequency identification).

Use of Nanomaterials in Food Science

The current global population is nearly 6 billion; due to this rapid population growth, there is a need to produce food in a more efficient, safe, and sustainable way, and it should be safe from the adverse effects of pathogenic organisms. A large proportion of population living in developing countries face daily food shortages as a result of environmental impacts or some other reasons like political instability, etc., while in the developed countries, food is surplus. For developing countries, the objective is to develop drought- and pest-resistant crops, with maximized yield. In developed countries, the food industry depends on consumer’s demand for fresher and healthier foodstuffs. The present chapter describes the use of nanoparticles in food science.

Recent advances in the biotoxicity of metal oxide nanoparticles: Impacts on plants, animals and microorganisms

The contact between metal oxide nanoparticles (NPs) and human is more and more close with their wide applications. The inputs of metal oxide NPs to the environment are also growing every year, which causes potential environmental and human health risks. They are toxic to animals, microorganisms and plants at high concentrations, and they show different mechanisms of toxicity to different species. In addition, under complex environmental conditions, their toxic effects are often unpredictable. We have integrated the recent studies on the biotoxicity of metal oxide NPs from 2015-present, and clarified their toxic mechanism, as well as the toxic harm. It lays a foundation for further studying the toxicity and ecological risk of metal oxide NPs.

Zinc Oxide nanoparticles induce oxidative and proteotoxic stress in ovarian cancer cells and trigger apoptosis Independent of p53-mutation status

Ovarian cancer continues to be the most lethal among gynecological malignancies and the major cause for cancer-associated mortality among women. Limitations of current ovarian cancer therapeutics is highlighted by the high frequency of drug-resistant recurrent tumors and the extremely poor 5-year survival rates. Zinc oxide nanoparticles (ZnO-NPs) have shown promise in various biomedical applications including utility as anti-cancer agents. Here, we describe the synthesis and characterization of physical properties of ZnO-NPs of increasing particle size (15 nm - 55 nm) and evaluate their benefits as an ovarian cancer therapeutic using established human ovarian cancer cell lines. Our results demonstrate that the ZnO-NPs induce acute oxidative and proteotoxic stress in ovarian cancer cells leading to their death via apoptosis. The cytotoxic effect of the ZnO-NPs was found to increase slightly with a decrease in nanoparticle size. While ZnO-NPs caused depletion of both wild-type and gain-of-function (GOF) mutant p53 protein in ovarian cancer cells, their ability to induce apoptosis was found to be independent of the p53-mutation status in these cells. Taken together, these results highlight the potential of ZnO-NPs to serve as an anti-cancer therapeutic agent for treating ovarian cancers independent of the p53 mutants of the cancer cells.

Metal-Organic Frameworks for Food Safety

Food safety is a prevalent concern around the world. As such, detection, removal, and control of risks and hazardous substances present from harvest to consumption will always be necessary. Metal-organic frameworks (MOFs), a class of functional materials, possess unique physical and chemical properties, demonstrating promise in food safety applications. In this review, the synthesis and porosity of MOFs are first introduced by some representative examples that pertain to the field of food safety. Following that, the application of MOFs and MOF-based materials in food safety monitoring, food processing, covering preservation, sanitation, and packaging is overviewed. Future perspectives, as well as potential opportunities and challenges faced by MOFs in this field will also be discussed. This review aims to promote the development and progress of MOF chemistry and application research in the field of food safety, potentially leading to novel solutions.

PVA/SA/TiO2-CUR patch for enhanced wound healing application: In vitro and in vivo analysis

Wound healing is a complex multistep process. Wound healing materials should have good antibacterial activity against wound infection causing microbes. Curcumin has effective antimicrobial activity, anti-inflammatory and antioxidant property. Titanium dioxide (TiO₂) is a biocompatible, nontoxic material used for many biomedical applications. The Usage of curcumin tagged TiO₂ nanoparticles for wound healing activity is promising due to the properties of both curcumin and TiO₂. We have synthesized curcumin tagged TiO₂ nanoparticles. The synthesized materials are characterized with XRD, FTIR and TEM. TiO₂-Cur nanocomposite was incorporated into poly vinyl alcohol (PVA) and sodium alginate (SA) patch. The PVA/SA/TiO₂-Cur patch was prepared by gel casting method. Antibacterial efficiency of PVA/SA/TiO₂-Cur patch was analyzed. Further, in vivo studies conducted on Wister rats confirmed the enhanced wound healing property of the PVA/SA/TiO₂-Cur patch. Our results suggest that this could be an ideal biomaterial for wound dressing applications.