Structural, textural and morphological characteristics of tannins from Acacia mearnsii encapsulated using sol-gel methods: Applications as antimicrobial agents

Polyphenols, Antioxidants, and Wound Healing of Lecythis pisonis Seed Coats

To better use the Lecythis pisonis Cambess. biomass, this study investigates whether Sapucaia seed coats present wound healing properties. We analyzed the antibacterial, antioxidant, and wound healing-promoting potentials, plus cytotoxicity and stimulation of vascular endothelial growth factor-A. The chemical composition was analyzed by positive ion mode electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry. A total of 19 compounds were identified, such as proanthocyanidin A1, procyanidins A1, B2, and C1, epigallocatechin, and kaempferol (p-coumaroyl) glycoside. Potent antioxidant strength/index was verified for 2,2-diphenyl-1-picrylhydrazyl radical (IC50 = 0.99 µg/mL) and ferric reducing antioxidant power (IC50 = 1.09 µg/mL). The extract did not present cytotoxicity and promoted significant cell migration and/or proliferation of fibroblasts (p < 0.05). Vascular endothelial growth factor-A was stimulated dose-dependently at 6 µg/mL (167.13 ± 8.30 pg/mL), 12.5 µg/mL (210.3 ± 14.2 pg/mL), and 25 µg/mL (411.6 ± 29.4 pg/mL). Platelet-derived growth factor (PDGF) (0.002 µg/mL) was stimulated at 215.98 pg/mL. Staphylococcus aureus was susceptible to the extract, with a minimum inhibitory concentration of 31.25 µg/mL. The identified compounds benefit the antioxidant activity, promoting hemostasis for the wound healing process, indicating that this extract has the potential for use in dermatological cosmetics.

Biomimetic Sol-Gel Chemistry to Tailor Structure, Properties, and Functionality of Bionanocomposites by Biopolymers and Cells

Biosilica, synthesized annually only by diatoms, is almost 1000 times more abundant than industrial silica. Biosilicification occurs at a high rate, although the concentration of silicic acid in natural waters is ~100 μM. It occurs in neutral aqueous solutions, at ambient temperature, and under the control of proteins that determine the formation of hierarchically organized structures. Using diatoms as an example, the fundamental differences between biosilicification and traditional sol-gel technology, which is performed with the addition of acid/alkali, organic solvents and heating, have been identified. The conditions are harsh for the biomaterial, as they cause protein denaturation and cell death. Numerous attempts are being made to bring sol-gel technology closer to biomineralization processes. Biomimetic synthesis must be conducted at physiological pH, room temperature, and without the addition of organic solvents. To date, significant progress has been made in approaching these requirements. The review presents a critical analysis of the approaches proposed to date for the silicification of biomacromolecules and cells, the formation of bionanocomposites with controlled structure, porosity, and functionality determined by the biomaterial. They demonstrated the broad capabilities and prospects of biomimetic methods for creating optical and photonic materials, adsorbents, catalysts and biocatalysts, sensors and biosensors, and biomaterials for biomedicine.

Tannic Acid as a Versatile Template for Silica Monoliths Engineering with Catalytic Gold and Silver Nanoparticles

Tannic acid in alkaline solutions in which sol-gel synthesis is usually performed with tetraethoxysilane is susceptible to various modifications, including formation of reactive radicals, oxidation under the action of atmospheric oxygen, self-association, and self-polymerization. Here, a precursor with ethylene glycol residues instead of ethanol was used, which made it possible to synthesize bionanocomposites of tannic acid and silica in one stage in neutral media under normal conditions without the addition of acid/alkali and organic solvents. Silica was fabricated in the form of optically transparent monoliths of various shapes with 2-4 nm pores, the radius of which well correlated with the size of a tannic acid macromolecule in a non-aggregated state. Polyphenol, which was remained in pores of silica matrix, served then as reducing agent to synthesize in situ gold and silver nanoparticles. As shown, these Au@SiO₂ and Ag@SiO₂ nanocomposites possessed localized surface plasmon resonance and high catalytic activity.

Tannin in Ruminant Nutrition: Review

Tannins are polyphenols characterized by different molecular weights that plants are able to synthetize during their secondary metabolism. Macromolecules (proteins, structural carbohydrates and starch) can link tannins and their digestion can decrease. Tannins can be classified into two groups: hydrolysable tannins and condensed tannins. Tannins are polyphenols, which can directly or indirectly affect intake and digestion. Their ability to bind molecules and form complexes depends on the structure of polyphenols and on the macromolecule involved. Tannins have long been known to be an "anti-nutritional agent" in monogastric and poultry animals. Using good tannins' proper application protocols helped the researchers observe positive effects on the intestinal microbial ecosystem, gut health, and animal production. Plant tannins are used as an alternative to in-feed antibiotics, and many factors have been described by researchers which contribute to the variability in their efficiencies. The objective of this study was to review the literature about tannins, their effects and use in ruminant nutrition.

Preparation of Hybrid Sol-Gel Materials Based on Living Cells of Microorganisms and Their Application in Nanotechnology

Microorganism-cell-based biohybrid materials have attracted considerable attention over the last several decades. They are applied in a broad spectrum of areas, such as nanotechnologies, environmental biotechnology, biomedicine, synthetic chemistry, and bioelectronics. Sol-gel technology allows us to obtain a wide range of high-purity materials from nanopowders to thin-film coatings with high efficiency and low cost, which makes it one of the preferred techniques for creating organic-inorganic matrices for biocomponent immobilization. This review focuses on the synthesis and application of hybrid sol-gel materials obtained by encapsulation of microorganism cells in an inorganic matrix based on silicon, aluminum, and transition metals. The type of immobilized cells, precursors used, types of nanomaterials obtained, and their practical applications were analyzed in detail. In addition, techniques for increasing the microorganism effective time of functioning and the possibility of using sol-gel hybrid materials in catalysis are discussed.

Azithromycin-loaded linolenic acid-modified methoxy poly(ethylene glycol) micelles for bacterial infection treatment

In the study, new polymeric micelles loaded with azithromycin were prepared to enhance azithromycin's solubility and evaluate its in vitro/in vivo antibacterial activity against Staphylococcus aureus. Amphiphilic α-Linolenic acid-methoxy poly (ethylene glycol) polymer (MPEG-LNA) was synthesized through DCC-DMAP esterification procedure. Through thin-film hydration method, optimized azithromycin-loaded micelles (AZI-M) were prepared with 87.15% of encapsulation efficiency and 11.07% of drug loading capacity when the ratio of LNA to MPEG was 4. Azithromycin's water-solubility was obviously enhanced due to its loading into the polymeric micelles. The azithromycin-loaded micelles were characterized in terms of x-ray diffraction, Fourier transform infrared spectroscopy, in vitro release, and in vitro/in vivo antibacterial experiments. Although the drug-loaded micelles provided a slow and continuous azithromycin's release in comparison with free azithromycin, in vitro antibacterial activity results confirmed that its effect on the inhibition of bacterial growth and biofilm formation was similar to free azithromycin. It is more interesting that the azithromycin-loaded micelles achieved good in vivo antibacterial therapeutic effect like QiXian® (azithromycin lactobionate injection) in mouse model of intraperitoneal infection. AZI-M can be considered as a potential candidate for in vivo antibiotic therapy of Staphylococcus aureus infections.

Analysis of metabolites in young and mature Docynia delavayi (Franch.) Schneid leaves using UPLC-ESI-MS/MS

Docynia delavayi (Franch.) Schneid is a plant used both as food and traditional folk medicine. The leaves of D. delavayi are rich in polyphenols, plants with phenolic content are known to be extremely beneficial in terms of human nutrition. In the present study, we used metabolome technology (UPLC-ESI-MS/MS) to examine the young and mature D. delavayi leaves on metabolites changes, which were then analyzed and compared. As a result, 477 metabolites (including 111 flavonoids, 47 others (consisted of nine vitamin, 18 saccharides and alcohols, and 20 unassigned metabolites), 71 phenolic acids, 52 amino acids and derivatives, 18 alkaloids, 61 lipids, 24 terpenoids, 33 nucleotides and derivatives, 18 lignans and coumarins, 12 tannins, 30 organic acids) were identified, of which 281 differentially accumulated metabolites, including 146 up-regulated metabolites and 135 down-regulated metabolites. The result of clustering and PCA analyses showed that young and mature leaves were separated, which indicated that there was a great difference in metabolites between young and mature leaves. Meanwhile, we also found that both young and mature leaves displayed unique metabolites with important biological functions. KEGG enrichment analysis showed that 90 of the differential metabolites were mainly concentrated in 68 KEGG pathways. The result will greatly complement the existing knowledge on the D. delavayi leaves for lays a foundation for subsequent development and utilization.

Alginate/Gelatin Sponges Composited with ZnO Sponge Effective Extensibility and Compressibility as a Wound Dressing for the Care of Fracture Surgery

We designed and synthesized highly porous alginate and gelatin hydrogels with zinc oxide nanoparticles (AGZNPs) as dressings using sol–gel methods. The presence of functional groups and the surface characteristics of the as-synthesised dressings were analyzed via Fourier transforminfrared (FT-IR) spectroscopy, while their morphology was studied via scanning electron microscopy (SEM). Additionally, the mechanical, inflammatory, and antibacterial properties and biocompatibility of the AGZNPs were evaluated to determine the efficiency of these bandages for wound healing applications. The AGZNPs demonstrated enhanced inflammatory and antibacterial properties. The biocompatibility of the nanocomposites was investigated in noncancerous NIH3T3 human fibroblasts. Furthermore, in-vivo examinations showed that the composition of the synthesized AGZNPs enhanced wound healing and promoted rapid cell construction and growth. Therefore, the AGZNP strategy promotes the future application of these nanoformulation hydrogels for wound bandaging in fracture surgeries.

Structured silica materials as innovative delivery systems for the bacteriocin nisin

Nisin was encapsulated in silica through sol-gel process by acid-catalyzed routes. The silica xerogels were characterized through nitrogen adsorption isotherms, small-angle X-ray scattering (SAXS), zeta potential, X-ray diffraction (XRD), scanning electron microscopy (SEM), diffuse reflectance spectroscopy (DRS), and Fourier transform infrared spectroscopy (FTIR). SAXS results showed that the particle diameters in a second level of aggregation varied from 4.78 to 5.86 nm. Zeta potential of silica particles were from -9.6 to -25.3 mV, while the surface area and pore diameters ranged from 216 to 598 m² g^-1 and 2.53 to 2.90 nm, respectively, indicating the formation of mesoporous nanostructures. Nisin retained the antimicrobial activity against all microorganisms tested after encapsulation in silica materials. These novel silica-based structures can be valuable carriers for nisin delivery in food systems.

Green synthesis of silica nanoparticles from olive residue and investigation of their anticancer potential

Aim: To synthesize silica nanoparticles (SNPs) from olive residue with anticancer properties. Methods: SNPs were synthesized from olive residue ash (ORA). After characterization, cytotoxicity of the SNPs was assessed in vitro, with measurement of reactive oxygen species (ROS) levels. Results: The average diameter of the synthesized SNPs was 30-40 nm, and zeta potential analysis suggested they were stable. The synthesized SNPs were less cytotoxic than commercially available SNPs against fibroblast cells, and the cytotoxic effect on breast cancer cells was significantly higher compared with fibroblast cells. SNPs showed greater uptake into cancer cells where there was greater production of free radicals. Conclusion: SNPs synthesized from ORA have potential anticancer applications because they are more cytotoxic toward cancer cells than fibroblast cells.

By-Products of Agri-Food Industry as Tannin-Rich Sources: A Review of Tannins' Biological Activities and Their Potential for Valorization

During recent decades, consumers have been continuously moving towards the substitution of synthetic ingredients of the food industry by natural products, obtained from vegetal, animal or microbial sources. Additionally, a circular economy has been proposed as the most efficient production system since it allows for reducing and reutilizing different wastes. Current agriculture is responsible for producing high quantities of organic agricultural waste (e.g., discarded fruits and vegetables, peels, leaves, seeds or forestall residues), that usually ends up underutilized and accumulated, causing environmental problems. Interestingly, these agri-food by-products are potential sources of valuable bioactive molecules such as tannins. Tannins are phenolic compounds, secondary metabolites of plants widespread in terrestrial and aquatic natural environments. As they can be found in plenty of plants and herbs, they have been traditionally used for medicinal and other purposes, such as the leather industry. This fact is explained by the fact that they exert plenty of different biological activities and, thus, they entail a great potential to be used in the food, nutraceutical and pharmaceutical industry. Consequently, this review article is directed towards the description of the biological activities exerted by tannins as they could be further extracted from by-products of the agri-food industry to produce high-added-value products.

Insights for the Valorization of Biomass from Portuguese Invasive Acacia spp. in a Biorefinery Perspective

Acacia spp. are widespread all over the Portuguese territory, representing a threat to local biodiversity and to the productivity of the forest sector. The measures adopted in some countries for their eradication or to control their propagation are expensive, have been considered unfeasible from practical and economical perspectives, and have generated large amounts of residue that must be valorized in a sustainable way. This review brings together information on the valorization of bark, wood, leaves, flowers, pods, seeds, roots, and exudates from Acacia spp., through the production of high-value bioactive extracts (e.g., antioxidant, antimicrobial, anti-inflammatory, antidiabetic, antiviral, anthelmintic, or pesticidal agents, suitable to be explored by pharmaceutical, nutraceutical, cosmetics, and food and feed industries), its incorporation in innovative materials (e.g., polymers and composites, nanomaterials, low-cost adsorbents), as well as through the application of advanced thermochemical processes (e.g., flash pyrolysis) and pre-treatments to decompose biomass in its structural components, regarding the production of biofuels along with valuable chemicals derived from cellulose, hemicellulose, and lignin. The knowledge of this research is important to encourage an efficient and sustainable valorization of Acacia spp. within a biorefinery concept, which can bring a significant economic return from the valorization of these residues, simultaneously contributing to forest cleaning and management, to reduce the risk of fires, and to improve the social-economic development of rural areas.

Encapsulation of Flavours and Fragrances into Polymeric Capsules and Cyclodextrins Inclusion Complexes: An Update

Flavours and fragrances are volatile compounds of large interest for different applications. Due to their high tendency of evaporation and, in most cases, poor chemical stability, these compounds need to be encapsulated for handling and industrial processing. Encapsulation, indeed, resulted in being effective at overcoming the main concerns related to volatile compound manipulation, and several industrial products contain flavours and fragrances in an encapsulated form for the final usage of customers. Although several organic or inorganic materials have been investigated for the production of coated micro- or nanosystems intended for the encapsulation of fragrances and flavours, polymeric coating, leading to the formation of micro- or nanocapsules with a core-shell architecture, as well as a molecular inclusion complexation with cyclodextrins, are still the most used. The present review aims to summarise the recent literature about the encapsulation of fragrances and flavours into polymeric micro- or nanocapsules or inclusion complexes with cyclodextrins, with a focus on methods for micro/nanoencapsulation and applications in the different technological fields, including the textile, cosmetic, food and paper industries.

Chemical modification of tannins from Acacia mearnsii to produce formaldehyde free flocculant

Flocculants and coagulants market is expected to grow in a Compound Annual Growth Rate (CAGR) of 5.9% between 2017 and 2022. The development of non-pollutant coagulants/flocculants aiming to replace conventional ones, usually toxic, has been extensively studied and one alternative is the possibility of obtaining tannin-based flocculants, compounds present in many plants and easily extracted. However, in order to use tannins as flocculants, their cationization is necessary, which is normally accomplished by Mannich reaction that requires formaldehyde addition, a toxic compound. In order to fill a gap in the literature, regarding coagulants/flocculants synthesis through green procedures, this paper aims to synthesize a flocculant from tannins with no use of formaldehyde, and optimize this synthesis through a Central Composite Rotatable Design (CCRD). The optimization variables were ammonium hydroxide (NH₄OH) to tannin ratio, in the range of 1:1 to 5:1, and reaction time, in the range of 1 to 4 h The evaluation of the synthesized flocculant samples was accomplished by jar tests using a simulated effluent containing humic acid and the effect of reactant ratio and reaction time used in the synthesis was assessed. The flocculant synthesis methodology proposed on this study showed excellent results regarding turbidity and color removal, since 100% of turbidity removal and 89.9% of color removal were achieved. This novel tannin-based flocculant synthesis methodology is a promising technology to replace conventional coagulants/flocculants, once it is environmentally friendly.

Anti-Fungal Efficacy and Mechanisms of Flavonoids

The prevalence of fungal infections is growing at an alarming pace and the pathogenesis is still not clearly understood. Recurrence of these fungal diseases is often due to their evolutionary avoidance of antifungal resistance. The development of suitable novel antimicrobial agents for fungal diseases continues to be a major problem in the current clinical field. Hence, it is urgently necessary to develop surrogate agents that are more effective than conventional available drugs. Among the remarkable innovations from earlier investigations on natural-drugs, flavonoids are a group of plant-derived substances capable of promoting many valuable effects on humans. The identification of flavonoids with possible antifungal effects at small concentrations or in synergistic combinations could help to overcome this problem. A combination of flavonoids with available drugs is an excellent approach to reduce the side effects and toxicity. This review focuses on various naturally occurring flavonoids and their antifungal activities, modes of action, and synergetic use in combination with conventional drugs.

Candida Infections and Therapeutic Strategies: Mechanisms of Action for Traditional and Alternative Agents

The Candida genus comprises opportunistic fungi that can become pathogenic when the immune system of the host fails. Candida albicans is the most important and prevalent species. Polyenes, fluoropyrimidines, echinocandins, and azoles are used as commercial antifungal agents to treat candidiasis. However, the presence of intrinsic and developed resistance against azole antifungals has been extensively documented among several Candida species. The advent of original and re-emergence of classical fungal diseases have occurred as a consequence of the development of the antifungal resistance phenomenon. In this way, the development of new satisfactory therapy for fungal diseases persists as a major challenge of present-day medicine. The design of original drugs from traditional medicines provides new promises in the modern clinic. The urgent need includes the development of alternative drugs that are more efficient and tolerant than those traditional already in use. The identification of new substances with potential antifungal effect at low concentrations or in combination is also a possibility. The present review briefly examines the infections caused by Candida species and focuses on the mechanisms of action associated with the traditional agents used to treat those infections, as well as the current understanding of the molecular basis of resistance development in these fungal species. In addition, this review describes some of the promising alternative molecules and/or substances that could be used as anticandidal agents, their mechanisms of action, and their use in combination with traditional drugs.

Tannins from Acacia mearnsii De Wild. Bark: Tannin Determination and Biological Activities

The bark of Acacia mearnsii De Wild. (black wattle) contains significant amounts of water-soluble components acalled "wattle tannin". Following the discovery of its strong antioxidant activity, a wattle tannin dietary supplement has been developed and as part of developing new dietary supplements, a literature search was conducted using the SciFinder data base for "Acacia species and their biological activities". An analysis of the references found indicated that the name of Acacia nilotica had been changed to Vachellia nilotica, even though the name of the genus Acacia originated from its original name. This review briefly describes why and how the name of A. nilotica changed. Tannin has been analyzed using the Stiasny method when the tannin is used to make adhesives and the hide-powder method is used when the tannin is to be used for leather tanning. A simple UV method is also able to be used to estimate the values for both adhesives and leather tanning applications. The tannin content in bark can also be estimated using NIR and NMR. Tannin content estimations using pyrolysis/GC, electrospray mass spectrometry and quantitative 31P-NMR analyses have also been described. Tannins consists mostly of polyflavanoids and all the compounds isolated have been updated. Antioxidant activities of the tannin relating to anti-tumor properties, the viability of human neuroblastoma SH-SY5Y cells and also anti-hypertensive effects have been studied. The antioxidant activity of proanthocyanidins was found to be higher than that of flavan-3-ol monomers. A total of fourteen papers and two patents reported the antimicrobial activities of wattle tannin. Bacteria were more susceptible to the tannins than the fungal strains tested. Several bacteria were inhibited by the extract from A. mearnsii bark. The growth inhibition mechanisms of E. coli were investigated. An interaction between extracts from A. mearnsii bark and antibiotics has also been studied. The extracts from A. mearnsii bark inhibit the growth of cyanobacteria. Wattle tannin has the ability to inactivate α-amylase, lipase and glucosidase. In vivo experiments on anti-obesity and anti-diabetes were also reported. Several patents relating to these enzymes for anti-diabetes and anti-obesity are in the literature. In addition, studies on Acacia bark extract regarding its antitermite activities, inhibition of itching in atopic dermatitis and anti-inflammatory effects have also been reported. The growth of bacteria was inhibited by the extract from A. mearnsii bark, and typical intestinal bacteria such as E. coli, K. pneumoniae, P. vulgaris and S. marcescenes was also inhibited in vitro by extracts. Based on these results, the Acacia bark extract may inhibit not only the growth of these typical intestinal bacteria but also the growth of other types of intestinal bacteria such as Clostridium and Bacteroides, a so-called "bad bacteria". If the tannin extract from A. mearnsii bark inhibits growth of these "bad bacteria" in vivo evaluation, the extracts might be usable as a new dietary supplement, which could control the human intestinal microbiome to keep the body healthy.