Osteoinductive potential and bone-bonding ability of ProRoot MTA, MTA Plus and Biodentine in rabbit intramedullary model: Microchemical characterization and histological analysis

Assessment of Physical Properties, Obturation Quality, and Cytocompatibility/Osteogenic Potential of KP-Root SP: A New Calcium Silicate-based Bio-ceramic Sealer

INTRODUCTION

The study aims to evaluate the physical properties, obturation quality, biocompatibility, and osteogenic induction characteristics of KP-Root SP with iRoot SP.

METHODS

The evaluation of flow, film thickness, radiopacity, and solubility was conducted according to ISO 6876 Dentistry-Root Canal Sealing Materials. Forty isolated premolars, after preparation, were numbered and randomly assigned into 2 groups, and root-filled using size-fitted gutta-percha master cones along with KP-Root SP or iRoot SP sealers. Micro computed tomography (Micro-CT) scans were performed pre- and postobturation, and reconstructed images were analyzed to determine the volumetric percentage of the filling materials. After setting, the sealers' microstructure and composition were analyzed using light microscopy, scanning electron microscopy, and energy dispersive spectroscopy. The release of silicon, calcium, and strontium ions were identified using inductively coupled plasma mass spectrometry. Cell proliferation, inflammatory cytokine production (interleukin-4 (IL-4), interleukin-6 (IL-6), and interleukin-8 (IL-8)), and osteogenic potential were examined in human periodontal ligament cells (hPDL cells) exposed to KP-Root SP or iRoot SP.

RESULTS

Both KP-Root SP and iRoot SP comply with the ISO 6876:2012 standard regarding flow, film thickness, radiopacity, and solubility. The 2 groups demonstrated 84%-95% canal space occupancy with root filling material. No notable differences were observed in the entire root canal, as well as in the apical and middle thirds. The KP-Root SP group contained a greater average volume of filling material in the coronal third than the iRoot SP group. Microscopic images and scanning electron microscopy analyses revealed that both materials exhibited no obvious gaps with dentin or gutta-percha, indicating good sealing properties. Both iRoot SP and KP-Root SP contain similar core elements in varying proportions. Additionally, KP-Root SP includes strontium. iRoot SP and KP-Root SP extracts at a concentration of 20 mg/mL have no cytotoxic effects on hPDL cells at both 24 and 48 hours. While iRoot SP and KP-Root SP promoted the release of IL-4 to induce an anti-inflammatory response, they also triggered increases in IL-6 and IL-8, reflecting a proinflammatory response. Both iRoot SP and KP-Root SP enhanced the osteogenic potential of hPDL cells.

CONCLUSIONS

The results demonstrate that KP-Root SP and iRoot SP show no significant differences in terms of physical properties, obturation quality, cytocompatibility, and osteogenic potential.

Comparative analysis of the inflammatory response of human gingival fibroblasts to NeoSEALER Flo and CeraSeal bioceramic sealers: an in vitro study

BACKGROUND

Therapeutic quality of endodontic sealers plays a critical role in promoting the success of root canal therapy by blocking entrance of microbes as well as facilitating tissue reparative process. The bioceramic sealers NeoSEALER Flo and CeraSeal have been on the rise owing to their biocompatibility and bioactivity. However, their relations with periapical tissues especially human gingival fibroblasts (HGFs) are still significant determinants of treatment outcomes. This in vitro case intends to analyze the inflammatory reaction of HGFs towards NeoSEALER Flo and CeraSeal bioceramic sealers and AH plus resin sealer as control.

MATERIALS AND METHODS

HGFs were cultured and treated with eluates of tested sealers at different dilutions; 25%, 50%, 75% and 100%. The extracts were left in incubator for 1, 3, and 7 days. Cell death was determined by the MTT assay, and the secretion levels of pro-inflammatory cytokines such as IL-6, IL-8, and TNF-α, were measured using q RT-PCR. Furthermore, mRNA and protein levels of some inflammatory markers were also estimated by q RT-PCR.

RESULTS

Analysis of the data showed that NeoSEALER Flo was cytotoxic in a concentration-dependent manner to HGFs, though it appeared marginally more toxic than CeraSeal when tested at the same ratios and same time. The high levels of all the measured pro-inflammatory cytokines in HGFs treated with both sealers at a higher concentration with NeoSEALER Flo showing a more intense effect. Having said so, gene expression profiles endorsed these results by showing that both sealers increase the level of IL-6, IL-8, and TNF-α at the higher concentrations.

CONCLUSIONS

The study indicates that both NeoSEALER Flo and CeraSeal bioceramic sealers activate HGFs inflammatory response with a slight preference for CeraSeal biocompatibility. Therefore, it becomes important and relevant to assess the cytotoxic and inflammatory propensity of various endodontic materials in order to guide enrolment of these endodontic products in clinical practice and improve the quality of endodontic treatment. Subsequent in vivo works should be done to confirm these in vitro findings as well as to examine the chronic effects of sealer-tissue interaction.

An Evaluation of the Biocompatibility and Chemical Properties of Two Bioceramic Root Canal Sealers in a Sealer Extrusion Model of Rat Molars

This study assessed the biocompatibility and chemical properties of two bioceramic root canal sealers, EndoSequence BC Sealer (EBC) and Nishika Canal Sealer BG (NBG), using a sealer extrusion model. Eight-week-old male Wistar rats were used. The mesial root canals of the upper first molars were pulpectomized and overfilled with EBC, NBG, or, as reference, epoxy resin-based AH Plus (AHP). After 28 days, periapical tissue reactions were assessed using microcomputed tomography and histological staining. The elemental composition and chemical composition of the extruded EBC and NBG were analyzed at Day 1 and 28 using an electron probe microanalyzer and micro-Raman spectroscopy. No periapical lesions were observed with the sealer extrusion. Additionally, inflammation around the extruded EBC and NBG was minimal to mild on Day 28, whereas moderate inflammation was found around the extruded AHP. Silicon concentration in the extruded EBC and NBG decreased significantly from Day 1 to 28, with almost no silicon present on Day 28. Furthermore, the extruded EBC and NBG became calcium- and phosphorus-rich, showing a Raman band for hydroxyapatite on Day 28. In conclusion, EBC and NBG demonstrated favorable biocompatibility and the ability to release silicon elements and produce hydroxyapatite when extruded into the periapical tissues. AHP showed moderate periapical tissue irritancy.

Evaluation of Microleakage of Orthograde Root-Filling Materials in Immature Permanent Teeth: An In Vitro Study

Introduction: The absence of a barrier in an open root apex makes endodontic treatment challenging as root-filling material can easily reach the surrounding tissue. The aim of the study was to compare the apical microleakage associated with mineral trioxide aggregate (MTA), biodentine, custom-made gutta-percha with MTA plus and custom-made gutta-percha with Adseal in immature permanent teeth by dye penetration method. Methods: Apical 2 mm of 60 single-rooted mandibular premolar teeth was resected to create divergent open apices and 10 teeth each were filled with Biodentine plug, MTA plug, custom-made gutta-percha with MTA plus sealer and custom-made gutta-percha with Adseal sealer. Ten teeth each acted as positive and negative controls. All the samples were stored at 37°C at 100% humidity for 5 weeks and then immersed in 2% Rhodamine B dye for 24 h. Transverse sectioning was done apically at 1 mm and 3 mm to evaluate dye penetration under a fluorescence microscope using ImageJ software. Results: There was a significantly greater microleakage at 1 mm cross section compared to 3 mm (p < 0.0001). At 1 mm cross section, the apical microleakage was the highest for the MTA plug with a mean leakage percentage of 48.08 ± 16.38, a mean depth of leakage of 0.46 ± 0.10 mm and a mean area of leakage of 1.35 ± 0.74 mm2, compared to other groups, and the difference was statistically significant. However, at a 3 mm cross section, MTA plus sealer with gutta-percha demonstrated the highest mean leakage percentage (25.01 ± 7.77) compared to other groups and the difference was statistically significant (p = 0.03). Conclusion: It can be concluded that the 3-mm-thick apical plug provided better sealing of the open apex compared to the 1 mm apical plug and there was no significant difference in microleakage among the Biodentine plug, MTA plug and Adseal sealer with gutta-percha plug at 3 mm cross section.

Dentine surface modification and remineralization induced by bioactive toothpastes

OBJECTIVE

In this study, dentine surface was analysed through Environmental-scanning-electron-microscopy (ESEM) with energy-dispersive-X-ray-spectrometry (EDX) and Fourier-transform-infrared-spectroscopy (FTIR) with attenuated total-reflectance (ATR) to assess the morpho-chemical changes and variations in mineralization degree after demineralizing treatment, after five toothpastes application (HA & Citrate toothpaste, Zinc-HA toothpaste, Calcium Sodium Phosphosilicate toothpaste, Arginine & Calcium carbonate toothpaste, Colgate-Triple-Action, and Control toothpaste), after soaking in artificial saliva and after citric acid attack.

METHODS

Ca/P, Ca/N and P/N ratios were calculated from EDX atomic data to evaluate the mineralization degree of dentine surface. The IR calcium phosphate (CaP)/collagen and carbonate/collagen ratios has been evaluated to assess the remineralization changes in dentine; the carbonate/collagen IR ratio was calculated to identify the nucleation of B-type-carbonated apatite and calcium carbonate.

RESULTS

ESEM-EDX and ATR-FTIR showed residuals of toothpastes after the treatments in all cases, with a general increase in the mineralization degree after soaking in artificial saliva and a decrease after acid attack. Treatment with Arginine & Calcium carbonate toothpaste showed the highest Ca/P value after treatment (Ca/P 1.62) and acid attack (Ca/P 1.5) in confirmation, IR showed the highest amount of carbonate after treatment and soaking in artificial saliva. Arginine and calcium carbonate toothpaste and HA and citrate toothpaste remained to a higher extent on the dentine surface and revealed a higher remineralization activity. These formulations showed higher resistance to demineralization attack, as demonstrated by a higher ICaP/IAmide II intensity ratio than those obtained after EDTA treatment.

CONCLUSIONS

Toothpastes that remained to a higher extent on dentine surface (arginine and calcium carbonate toothpaste in particular) were more able to promote remineralization. The formed calcium phosphate (CaPs) phase was intimately bound to dentine rather than a simple deposit.

Mineralization and morphology of peri-implant bone around loaded and unloaded dental implants retrieved from the human mandible

PURPOSE

Limited data is reported regarding the bone mineralization around dental implants in the first months from insertion. The study analyzed the peri-implant bone around loaded and unloaded implants retrieved from human mandible after 4 months from placement.

METHOD

The composition and mineralization of human bone were analyzed through an innovative protocol technique using Environmental-Scanning-Electron-Microscopy connected with Energy-Dispersive-X-Ray-Spectroscopy (ESEM/EDX). Two regions of interest (ROIs, approximately 750×500 μm) for each bone implant sample were analyzed at the cortical (Cortical ROI) and apical (Apical ROI) implant threads. Calcium, phosphorus, and nitrogen (atomic%) were determined using EDX, and the specific ratios (Ca/N, P/N, and Ca/P) were calculated as mineralization indices.

RESULTS

Eighteen implant biopsies from ten patients were analyzed (unloaded implants, n=10; loaded implants, n=8). For each ROI, four bone areas (defined bones 1-4) were detected. These areas were characterized by different mineralization degree, varied Ca, P and N content, and different ratios, and by specific grayscale intensity detectable by ESEM images. Bony tissue in contact with loaded implants at the cortical ROI showed a higher percentage of low mineralized bone (bone 1) and a lower percentage of remodeling bone (bone 2) when compared to unloaded implants. The percentage of highly mineralized bone (bone 3) was similar in all groups.

CONCLUSION

Cortical and apical ROIs resulted in a puzzle of different bone "islands" characterized by various rates of mineralization. Only the loaded implants showed a high rate of mineralization in the cortical ROI.

Effects of vehicles on the physical properties and biocompatibility of premixed calcium silicate cements

Premixed calcium silicate cements (pCSCs) contain vehicles which endow fluidity and viscosity to CSCs. This study aimed to investigate the effects of three vehicles, namely, polyethylene glycol (PEG), propylene glycol (PG), and dimethyl sulfoxide (DMSO), on the physicochemical properties and biocompatibility of pCSCs. The setting time, solubility, expansion rate, and mechanical strength of the pCSCs were evaluated, and the formation of calcium phosphate precipitates was assessed in phosphate-buffered saline (PBS). The effects of pCSC extracts on the osteogenic differentiation of mesenchymal stem cells (MSCs) were investigated. Finally, the tissue compatibility of pCSCs in rat femurs was observed. CSC containing PEG (CSC-PEG) exhibited higher solubility and setting time, and CSC-DMSO showed the highest expansion rate and mechanical strength. All pCSCs generated calcium phosphate precipitates. The extract of CSC-PG induced the highest expressions of osteogenic markers along with the greatest calcium deposites. When implanted in rat femurs, CSC-PEG was absorbed considerably, whereas CSC-PG remained relatively unaltered inside the femur.

The osteoinductive potential of different root-filling materials in a rat femur model

In pediatric dentistry, the enduring success of root-end filling materials employed for the establishment of apical plugs in immature teeth undergoing endodontic intervention is contingent upon their possessing a robust osteoinductive capacity. Hence, the primary objective of this study was to histologically assess the osteoinductive potential of four distinct dental materials, specifically recommended for retrograde filling applications, utilizing an animal hard tissue model. Within the designed experimental model, two bone defects measuring 2 mm in diameter and 2 mm in depth were created in both femurs of a cohort comprising 21 male Wistar albino rats. The first defect in the right femur was left blank as the control group, and Neo MTA Plus was placed in the second defect. The EndoSequence BCRRM Fast Set Putty was placed in the first of the defects on the left femur, and Endo Repair was placed in the second defect. Subjects were sacrificed after 7, 14, and 28 days of follow-up, and sections were examined to assess the degree of inflammation, connective tissue formation, and new bone formation. The data were statistically evaluated with Kruskal‒Wallis and post hoc Dunn's tests using SPSS 12 software. The bone healing levels of the Neo MTA Plus group were significantly higher than those of the other groups in all periods (p < 0.05). Bone organization in all groups decreased over time, and fibrous tissue was enriched. The results of this study demonstrate that NeoMta Plus has superior osteoinductive properties compared to other materials but that EndoSequence and Endo Repair have the potential to be developed.

Influence of bioceramic cones on the quality of root canal filling relative to bond strength and adaptation of the adhesive interface

AIM

To evaluate the bond strength (BS) and analysis of the adhesive interface in root canals filled with bioceramic gutta percha sealers and cones.

MATERIAL AND METHODS

Ninety-six maxillary canines were divided into eight groups according to the endodontic sealer (AH Plus, AH Plus Bioceramic, Bio-C Sealer or Bio-C Sealer Ion+ and gutta percha cones (conventional or bioceramic) tested. They were analyzed using the BS test, failure pattern, analysis of the adhesive interface by scanning electron microscopy and confocal laser scanning microscopy. The BS data were compared between groups using the analysis of variance test with the Turkey post-test. The chi-square test was used to assess the type of failure and the non-parametric Mann-Whitney and Kruse-Wallis tests (P < 0.05).

RESULTS

Analysis of variance showed higher BS values for the groups of bioceramic gutta percha cones in Bio-C Sealer Ion+ (8.38 ± 4.27), AH Plus Bioceramic (6.19 ± 3.28), Bio-C Sealer (5.70 ± 3.18), AH Plus (4.61 ± 2.11) and for conventional gutta percha cones in AH Plus sealers (4.26 ± 2.35), Bio-C Sealer Ion + (3.63 ± 2.29), Bio-C Sealer (2.94 ± 2.32) and AH Plus Bioceramic (1.19 ± 0.89) (P < 0.05). Relative to the type of failure and adaptation of the types of filling material, a higher percentage of mixed failures was observed (gaps between 1 µm-10 µm) for the group with bioceramic gutta percha cones (P < 0.001).

CONCLUSION

The bond between sealers and bioceramic gutta percha cones showed higher bond strength values and greater penetration into the dentin tubules.

CLINICAL RELEVANCE

The filling the root canal system with bioceramic sealers should be associated with bioceramic gutta percha cones.

Poly(Aspartic Acid) Promotes Odontoblast-like Cell Differentiation in Rat Molars with Exposed Pulp

In recent years, alternative pulpal therapies targeting dentinogenesis signaling pathways using different peptides have been investigated. The aim of this study was to verify the effectiveness of poly(aspartic acid), pAsp, in dentin regeneration using an animal model.

METHODS

Mechanical pulp exposure was performed in the upper molars of 56 Wistar rats, randomly divided as follows (n = 14): control (no treatment); MTA group-pulp capping with mineral trioxide aggregate (MTA Angelus); pAsp group-application of 20 μL of pAsp solution (25 mg·mL-1); MTA+pAsp group-application of MTA mixed with pAsp (5:1 by mass). Animals were euthanized after 7 or 21 days. Histological sections were submitted to hematoxylin-eosin and Brown and Brenn staining and immunohistochemical analysis for osteopontin (OPN) and dentin matrix protein 1 (DMP 1).

RESULTS

At 7 days, an acute inflammatory infiltrate and the presence of disorganized mineralized tissue were observed in all groups. At 21 days, the quality and thickness of the reparative dentin in treated groups were superior to the control, and bacterial contamination was observed in two MTA-pAsp specimens. While all treated groups showed intense immunostaining for OPN at 21 days, only the pAsp group expressed DMP 1, indicating the presence of fully differentiated odontoblast-like cells.

CONCLUSION

Poly(aspartic) acid promoted dentin regeneration in rat molars in the absence of an additional calcium source and may be an alternative to MTA as a pulp-capping agent.

Antibacterial Activity of Root Repair Cements in Contact with Dentin-An Ex Vivo Study

This study assessed the antibacterial characteristics of the dentin/material interface and dentin surfaces exposed to experimental hydraulic calcium silicate cement (HCSC) with or without bioactive glass (BG) replacement (20% or 40%) or mixed with a silver nanoparticle (SNP) solution (1 or 2 mg/mL), and Biodentine, TotalFill BC RRM putty and Intermediate Restorative Material (IRM). Human root dentin segments with test materials were assessed at 1 or 28 days. In one series, the specimens were split to expose the dentin and material surfaces. A 24 h direct contact test was conducted against three-day established Enterococcus faecalis and Pseudomonas aeruginosa monospecies biofilms. In another series, the dentin/material interface of intact specimens was exposed to biofilm membranes for 3 days and the antibacterial activity was assessed via confocal microscopy. The interface was additionally characterised. All one-day material and dentin surfaces were antibacterial. Dentin surfaces exposed to HCSC with 40% BG-replacement, Biodentine and IRM had decreased antibacterial properties compared to those of the other cements. The HCSC mixed with a 2 mg/mL SNP solution had the highest antimicrobial effect in the confocal assay. The interfacial characteristics of HCSCs were similar. The test materials conferred antibacterial activity onto the adjacent dentin. The BG reduced the antibacterial effect of dentin exposed to HCSC; a 2 mg/mL SNP solution increased the antibacterial potential for longer interaction periods (three-day exposure).

ESEM-EDX Mineralization and Morphological Analysis of Human Retrieved Maxillary Sinus Bone Graft Biopsies before Loading

This study aimed to analyze the morphology of bone graft granules, the presence of granule demineralization, and bone morphology in retrieved human maxillary sinus bone graft biopsies. Healthy patients underwent sinus bone augmentation using lateral access. Two different dimensions of the antrostomy were performed, a 4 mm or 8 mm height. After 6 months, all sites received one implant using a flap technique, crestal positioning, and submerged healing. Implant biopsies were retrieved after 3 months and were histologically processed. The ESEM analysis was performed on the entire portion of the peri-implant bone (up to 750 µm from the implant thread). Three different regions of interest (ROIs) were selected: the coronal, middle, and apical portions of the implant. In these areas, EDX was performed, and calcium (Ca), phosphate (P), nitrogen (N), and their atomic ratios (Ca/P, Ca/N, and P/N) were calculated. Different bone tissue electron-dense areas were detected through grayscale intensity quantification of ESEM images with different organic (N) or inorganic (Ca,P) compositions. A total of 16 biopsies from 16 healthy patients were analyzed. Bone graft granules were mostly detected in the apical ROI. New bone tissue bridges were detected in the apical and middle ROI. These structures, with lower Ca/N and P/N ratios, were connected and enveloped the bone graft granules. Cortical ROI revealed the most mineralized bone tissue. Conclusions: After 9 months, bone graft resorption was only partially completed and new bone tissue appeared less mineralized in the middle and apical ROI than in the coronal ROI.

Endodontic management of type IIIb dens invaginatus in central incisor: A case report

We described a type IIIb dens invaginatus, its root canal treatment, and results on 3- and 12-month visits. Despite its significant challenges, proper endodontic therapy in such cases can cause positive prognosis and successful outcome.

Intramedullary bone tissue reaction of ion-releasing resin-modified glass-ionomer restoration versus two calcium silicate-based cements: an animal study

This comparative study was conducted to assess the intramedullary bone tissue reaction of an ion-releasing resin modified glass-ionomer cement with claimed bioactivity (ACTIVA bioactive resin) restorative material versus Mineral Trioxide Aggregate High Plasticity (MTA HP) and bioceramic putty iRoot BP Plus. Fifty-six adult male Wistar rats were assigned into 4 equal groups (14 rats each). A surgical intramedullary bi-lateral tibial bone defects were performed in rats of the control group I (GI) and left without any treatment to be considered as controls (n = 28). The rats of groups II, III and IV were handled as group I except that the tibial bone defects were filled with ACTIVA, MTA HP and iRoot BP, respectively. In all groups, rats were euthanized after one month and specimens were processed to histological investigation, SEM examination and EDX elemental analysis. In addition, semi-quantitative histomorphometric scoring system was conducted for the following parameters; new bone formation, inflammatory response, angiogenesis, granulation tissue, osteoblasts and osteoclasts. The clinical follow-up outcome of this study revealed the recovery of rats after 4 days post-surgical procedure. It was observed that the animal subjects returned to their routine activities, e.g., walking, grooming and eating. The rats showed normal chewing efficiency without any weight loss or postoperative complications. Histologically, the control group sections showed scanty, very thin, new bone trabeculae of immature woven type located mostly at the peripheral part of the tibial bone defects. These defects exhibited greater amount of thick bands of typically organized granulation tissue with central and peripheral orientation. Meanwhile, bone defects of ACTIVA group showed an empty space surrounded by thick, newly formed, immature woven bone trabeculae. Moreover, bone defects of MTA HP group were partially filled with thick newly formed woven bone trabeculae with wide marrow spaces presented centrally and at the periphery with little amount of mature granulation tissue at the central part. The iRoot BP Plus group section exhibited an observable woven bone formation of normal trabecular structures with narrow marrow spaces presented centrally and at the periphery showed lesser amount of well-organized/mature granulation tissue formation. Kruskal Wallis test revealed total significant differences between the control, ACTIVA, MTAHP and iRoot BP Plus groups (p < 0.05). Meanwhile, Mann-Whitney U test showed significant difference between control and ACTIVA groups, Control and MTA HP groups, control and iRoot BP Plus groups. ACTIVA and MTA HP groups, ACTIVA and iRoot BP Plus (p ˂ 0.05) with no significant difference between MTA HP and iRoot BP Plus (p > 0.05). The elemental analysis outcome showed that the lesions of the control group specimens were filled with recently created trabecular bone with limited marrow spaces. EDX tests (Ca and P analysis) indicated a lower degree of mineralization. Lower amounts of Ca and P was expressed in the mapping analysis compared with other test groups. Calcium silicate-based cements induce more bone formation when compared to an ion-releasing resin modified glass-ionomer restoration with claimed bioactivity. Moreover, the bio-inductive properties of the three tested materials are likely the same. Clinical significance: bioactive resin composite can be used as a retrograde filling.

Effects of direct therapeutic radiation on pulpal surface of root dentin: an in vitro study

The aims of the study were to analyze the effects of therapeutic radiation on human root dentin samples from the aspect of possible alterations in crystallinity, micro-morphology, and composition. Fifty-six root dentin specimens were divided into seven groups (0, 10, 20, 30, 40, 50, and 60 Gy). Scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) analyses were performed on pulpal surfaces of root dentin after being irradiated by 6MV photon energy. Mineral compositions, Ca/P, P/N, Ca/N ratios, and hydroxyapatite pikes were calculated. Some deuteriations on the dentin surface were observed in SEM images after 30 Gy and subsequent doses. One-way ANOVA revealed that there was no significant alteration in weight percentages of C, O, Mg, Ca, P, and N between groups. Radiation did not influence stoichiometric Ca/P, Ca/N, and P/N molar ratios. XRD analysis did not show a remarkable decline in hydroxyapatite pikes by the increasing doses. Radiotherapy changes the micromorphology of circumpulpal dentin but does not affect elemental composition and crystallinity.

In Vivo Assessment of the Apatite-Forming Ability of New-Generation Hydraulic Calcium Silicate Cements Using a Rat Subcutaneous Implantation Model

Hydroxyapatite formation on endodontic hydraulic calcium silicate cements (HCSCs) plays a significant role in sealing the root canal system and elevating the hard-tissue inductivity of the materials. This study evaluated the in vivo apatite-forming ability of 13 new-generation HCSCs using an original HCSC (white ProRoot MTA: PR) as a positive control. The HCSCs were loaded into polytetrafluoroethylene tubes and implanted in the subcutaneous tissue of 4-week-old male Wistar rats. At 28 days after implantation, hydroxyapatite formation on the HCSC implants was assessed with micro-Raman spectroscopy, surface ultrastructural and elemental characterization, and elemental mapping of the material-tissue interface. Seven new-generation HCSCs and PR had a Raman band for hydroxyapatite (v1 PO₄^3- band at 960 cm^-1) and hydroxyapatite-like calcium-phosphorus-rich spherical precipitates on the surfaces. The other six HCSCs with neither the hydroxyapatite Raman band nor hydroxyapatite-like spherical precipitates did not show calcium-phosphorus-rich hydroxyapatite-layer-like regions in the elemental mapping. These results indicated that 6 of the 13 new-generation HCSCs possessed little or no ability to produce hydroxyapatite in vivo, unlike PR. The weak in vivo apatite-forming ability of the six HCSCs may have a negative impact on their clinical performance.

The Use of Premixed Calcium Silicate Bioceramic Sealer with Warm Carrier-Based Technique: A 2-Year Study for Patients Treated in a Master Program

Background: Recently several calcium silicate flowable sealers have been introduced as endodontic materials for the root canal. This clinical study tested the use of a new premixed calcium silicate bioceramic sealer in association with the Thermafil warm carrier-based technique (TF). Epoxy-resin-based sealer with the warm carrier-based technique was the control group. Methodology: Healthy consecutive patients (n = 85) requiring 94 root canal treatments were enrolled in this study and assigned to one filling group (Ceraseal-TF n = 47, AH Plus-TF n = 47) in accordance with operator training and best clinical practice. Periapical X-rays were taken preoperatively, after root canal filling and after 6, 12 and 24 months. Two evaluators blindly assessed the periapical index (PAI) and sealer extrusion in the groups (k = 0.90). Healing rate and survival rate were also evaluated. Chi-square tests was used to analyze significant differences between the groups. Multilevel analysis was performed to evaluate the factors associated with healing status. Results: A total of 89 root canal treatments in 82 patients were analyzed at the end-line (24 months). The total drop-out was 3.6% (3 patients; 5 teeth). A total of 91.1% of healed teeth (PAI 1-2) was observed in Ceraseal-TF, with 88.6% in AH Plus-TF. No significant difference was observed on healing outcome and survival among the two filling groups (p > 0.05). Apical extrusion of the sealers occurred in 17 cases (19.0%). Of these, 6 occurred in Ceraseal-TF (13.3%) and 11 in AH Plus-TF (25.0%). Three Ceraseal extrusions were radiographically undetectable after 24 months. All the AH Plus extrusions did not change during the evaluation time. Conclusions: The combined use of the carrier-based technique and premixed CaSi-based bioceramic sealer showed clinical results comparable with carrier-based technique and epoxy-resin-based sealer. The radiographical disappearance of apically extruded Ceraseal is a possible event in the first 24 months.

Cytotoxicity and Biomineralization Potential of Flavonoids Incorporated into PNVCL Hydrogels

This study aimed to evaluate the effects of flavonoids incorporated into poly(N-vinylcaprolactam) (PNVCL) hydrogel on cell viability and mineralization markers of odontoblast-like cells. MDPC-23 cells were exposed to ampelopsin (AMP), isoquercitrin (ISO), rutin (RUT) and control calcium hydroxide (CH) for evaluation of cell viability, total protein (TP) production, alkaline phosphatase (ALP) activity and mineralized nodule deposition by colorimetric assays. Based on an initial screening, AMP and CH were loaded into PNVCL hydrogels and had their cytotoxicity and effect on mineralization markers determined. Cell viability was above 70% when MDPC-23 cells were treated with AMP, ISO and RUT. AMP showed the highest ALP activity and mineralized nodule deposition. Extracts of PNVCL+AMP and PNVCL+CH in culture medium (at the dilutions of 1/16 and 1/32) did not affect cell viability and stimulated ALP activity and mineralized nodules’ deposition, which were statistically higher than the control in osteogenic medium. In conclusion, AMP and AMP-loaded PNVCL hydrogels were cytocompatible and able to induce bio-mineralization markers in odontoblast-cells.

Biomimetic Approaches in Clinical Endodontics

In the last few decades, biomimetic concepts have been widely adopted in various biomedical fields, including clinical dentistry. Endodontics is an important sub-branch of dentistry which deals with the different conditions of pulp to prevent tooth loss. Traditionally, common procedures, namely pulp capping, root canal treatment, apexification, and apexigonesis, have been considered for the treatment of different pulp conditions using selected materials. However, clinically to regenerate dental pulp, tissue engineering has been advocated as a feasible approach. Currently, new trends are emerging in terms of regenerative endodontics which have led to the replacement of diseased and non-vital teeth into the functional and healthy dentine-pulp complex. Root- canal therapy is the standard management option when dental pulp is damaged irreversibly. This treatment modality involves soft-tissue removal and then filling that gap through the obturation technique with a synthetic material. The formation of tubular dentine and pulp-like tissue formation occurs when stem cells are transplanted into the root canal with an appropriate scaffold material. To sum up tissue engineering approach includes three components: (1) scaffold, (2) differentiation, growth, and factors, and (3) the recruitment of stem cells within the pulp or from the periapical region. The aim of this paper is to thoroughly review and discuss various pulp-regenerative approaches and materials used in regenerative endodontics which may highlight the current trends and future research prospects in this particular area.

Chemical-Physical Properties and Bioactivity of New Premixed Calcium Silicate-Bioceramic Root Canal Sealers

The aim of the study was to analyze the chemical−physical properties and bioactivity (apatite-forming ability) of three recently introduced premixed bioceramic root canal sealers containing varied amounts of different calcium silicates (CaSi): a dicalcium and tricalcium silicate (1−10% and 20−30%)-containing sealer with zirconium dioxide and tricalcium aluminate (CERASEAL); a tricalcium silicate (5−15%)-containing sealer with zirconium dioxide, dimethyl sulfoxide and lithium carbonate (AH PLUS BIOCERAMIC) and a dicalcium and tricalcium silicate (10% and 25%)-containing sealer with calcium aluminate, tricalcium aluminate and tantalite (NEOSEALER FLO). An epoxy resin-based sealer (AH PLUS) was used as control. The initial and final setting times, radiopacity, flowability, film thickness, open pore volume, water absorption, solubility, calcium release and alkalizing activity were tested. The nucleation of calcium phosphates and/or apatite after 28 days aging in Hanks balanced salt solution (HBSS) was evaluated by ESEM-EDX, vibrational IR and micro-Raman spectroscopy. The analyses showed for NeoSealer Flo and AH Plus the longest final setting times (1344 ± 60 and 1300 ± 60 min, respectively), while shorter times for AH Plus Bioceramic and Ceraseal (660 ± 60 and 720 ± 60 min, respectively). Radiopacity, flowability and film thickness complied with ISO 6876/12 for all tested materials. A significantly higher open pore volume was observed for NeoSealer Flo, AH Plus Bioceramic and Ceraseal when compared to AH Plus (p < 0.05), significantly higher values were observed for NeoSealer Flo and AH Plus Bioceramic (p < 0.05). Ceraseal and AH Plus revealed the lowest solubility. All CaSi-containing sealers released calcium and alkalized the soaking water. After 28 days immersion in HBSS, ESEM-EDX analyses revealed the formation of a mineral layer that covered the surface of all bioceramic sealers, with a lower detection of radiopacifiers (Zirconium for Ceraseal and AH Plus Bioceramic, Tantalum for NeoSealer Flo) and an increase in calcium, phosphorous and carbon. The calcium phosphate (CaP) layer was more evident on NeoSealer Flo and AH Plus Bioceramic. IR and micro-Raman revealed the formation of calcium carbonate on the surface of all set materials. A thin layer of a CaP phase was detected only on AH Plus Bioceramic and NeoSealer Flo. Ceraseal did not show CaP deposit despite its highest calcium release among all the tested CaSi-containing sealers. In conclusion, CaSi-containing sealers met the required chemical and physical standards and released biologically relevant ions. Slight/limited apatite nucleation was observed in relation to the high carbonation processes.

Driving native-like zonal enthesis formation in engineered ligaments using mechanical boundary conditions and β-tricalcium phosphate

Fibrocartilaginous entheses are structurally complex tissues that translate load from elastic ligaments to stiff bone via complex zonal gradients in the organization, mineralization, and cell phenotype. Currently, these complex gradients necessary for long-term mechanical function are not recreated in soft tissue-to-bone healing or engineered replacements, contributing to high failure rates. Previously, we developed a culture system that guides ligament fibroblasts to develop aligned native-sized collagen fibers using high-density collagen gels and mechanical boundary conditions. These constructs are promising ligament replacements, however functional ligament-to-bone attachments, or entheses, are required for long-term function in vivo. The objective of this study was to investigate the effect of compressive mechanical boundary conditions and the addition of beta-tricalcium phosphate (βTCP), a known osteoconductive agent, on the development of zonal ligament-to-bone entheses. We found that compressive boundary clamps, that restrict cellular contraction and produce a zonal tensile-compressive environment, guide ligament fibroblasts to produce 3 unique zones of collagen organization and zonal accumulation of glycosaminoglycans (GAGs), type II, and type X collagen. Ultimately, by 6 weeks of culture these constructs had similar organization and composition as immature bovine entheses. Further, βTCP applied under the clamp enhanced maturation of these entheses, leading to significantly increased tensile moduli, and zonal GAG accumulation, ALP activity, and calcium-phosphate accumulation, suggesting the initiation of endochondral ossification. This culture system produced some of the most organized entheses to date, closely mirroring early postnatal enthesis development, and provides an in vitro platform to better understand the cues that drive enthesis maturation in vivo. STATEMENT OF SIGNIFICANCE: Ligaments are attached to bone via entheses. Entheses are complex tissues with gradients in organization, composition, and cell phenotype. Entheses are necessary for proper transfer of load from ligament-to-bone, but currently are not restored with healing or replacements. Here, we provide new insight into how tensile-compressive boundary conditions and βTCP drive zonal gradients in collagen organization, mineralization, and matrix composition, producing tissues similar to immature ligament-to-bone attachments. Collectively, this culture system uses a bottom-up approach with mechanical and biochemical cues to produce engineered replacements which closely mirror postnatal enthesis development. This culture system is a promising platform to better understanding the cues that regulate enthesis formation so to better drive enthesis regeneration following graft repair and in engineered replacements.

Green Hydrogels Composed of Sodium Mannuronate/Guluronate, Gelatin and Biointeractive Calcium Silicates/Dicalcium Phosphate Dihydrate Designed for Oral Bone Defects Regeneration

Innovative green, eco-friendly, and biologically derived hydrogels for non-load bearing bone sites were conceived and produced. Natural polysaccharides (copolymers of sodium D-mannuronate and L-guluronate) with natural polypeptides (gelatin) and bioactive mineral fillers (calcium silicates CaSi and dicalcium phosphate dihydrate DCPD) were used to obtain eco-sustainable biomaterials for oral bone defects. Three PP-x:y formulations were prepared (PP-16:16, PP-33:22, and PP-31:31), where PP represents the polysaccharide/polypeptide matrix and x and y represent the weight % of CaSi and DCPD, respectively. Hydrogels were tested for their chemical-physical properties (calcium release and alkalizing activity in deionized water, porosity, solubility, water sorption, radiopacity), surface microchemistry and micromorphology, apatite nucleation in HBSS by ESEM-EDX, FT-Raman, and micro-Raman spectroscopies. The expression of vascular (CD31) and osteogenic (alkaline phosphatase ALP and osteocalcin OCN) markers by mesenchymal stem cells (MSCs) derived from human vascular walls, cultured in direct contact with hydrogels or with 10% of extracts was analysed. All mineral-filled hydrogels, in particular PP-31:31 and PP-33:22, released Calcium ions and alkalized the soaking water for three days. Calcium ion leakage was high at all the endpoints (3 h-28 d), while pH values were high at 3 h-3 d and then significantly decreased after seven days (p < 0.05). Porosity, solubility, and water sorption were higher for PP-31:31 (p < 0.05). The ESEM of fresh samples showed a compact structure with a few pores containing small mineral granules agglomerated in some areas (size 5-20 microns). PP-CTRL degraded after 1-2 weeks in HBSS. EDX spectroscopy revealed constitutional compounds and elements of the hydrogel (C, O, N, and S) and of the mineral powders (Ca, Si and P). After 28 days in HBSS, the mineral-filled hydrogels revealed a more porous structure, partially covered with a thicker mineral layer on PP-31:31. EDX analyses of the mineral coating showed Ca and P, and Raman revealed the presence of B-type carbonated apatite and calcite. MSCs cultured in contact with mineral-filled hydrogels revealed the expression of genes related to vascular (CD31) and osteogenic (mainly OCN) differentiation. Lower gene expression was found when cells were cultured with extracts added to the culture medium. The incorporation of biointeractive mineral powders in a green bio-derived algae-based matrix allowed to produce bioactive porous hydrogels able to release biologically relevant ions and create a suitable micro-environment for stem cells, resulting in interesting materials for bone regeneration and healing in oral bone defects.

Evaluation of pH, Calcium Ion Release, and Dimensional Stability of an Experimental Silver Nanoparticle-Incorporated Calcium Silicate-Based Cement

An experimental calcium silicate-based root-end filling material incorporated with silver nanoparticles intended for use in periapical surgeries was developed with the purpose to overcome the drawbacks of existing materials and to satisfy the ideal requirements of root-end filling materials. This study was designed to evaluate the physicochemical properties, pH, calcium ion release, and dimensional stability of the experimental cement, and compare the results with commercially available ProRoot MTA (Dentsply). An independent sample test was used to analyze the data. Mean initial pH (immediately after mixing) of the experimental cement was 10.42 ± 0.04 which was higher than that of MTA. However, there was a significant increase in pH of MTA at 1 day, 2 days, and 7 days. Presence of calcium chloride favored the release of calcium ions which was significantly increased in the experimental group at 24 hours. At the end of 30 days, MTA showed a significant expansion when compared to the experimental cement (p < 0.001). In conclusion, the experimental nanoparticle-incorporated calcium silicate-based cement showed clinically acceptable physicochemical properties.

Sealing ability and microbial leakage of root-end filling materials: MTA versus epoxy resin: A systematic review and meta-analysis

Objectives

The purpose of this systematic review of the literature is to investigate which of the epoxy-based cements and those based on Tricalciumsilicate (MTA, Bioceramic) have the best sealing capacity through the analysis of studies that have provided a survey model in vitro of bacteria leakage.

Source

The articles were identified using electronic databases such as PubMed, Scopus, the search was conducted between 8.12.2020 and 31.12.2020 and a last search was conducted on 2.12.2021.

Study selection

678 records were identified and after removing the duplicates we obtain 481 records, with the first phase of screening and selection of records we reached 204 and with the application of the inclusion and exclusion criteria we selected 31 articles, only 9 studies made a direct comparison between the two endodontic cement categories and presented data that could be included in the metaanalysis.

Data

The meta-analysis of first outcome shows an odds ratio of 2.70 C.I.(Confidence Interval) [1.54, 4.73], the test for overall effect has a p value = 0.0005 with a heterogeneity index of I 2 of 9%; The second outcome meta-analysis shows an Odds Ratio of 1.50 C.I. (Confidence Interval) [0.92, 2.46] with a p value of 0.10 with an I 2 of 79%.

Conclusion

the sealing ability is higher for epoxy resins than for tricalcium silicate-based cements, for observation periods longer than 90 days.

Clinical relevance

The knowledge of the cement that determines the best sealing ability and resistance to microbial leakage, can be of help for the dentist who has to face clinical situations such as endodontic retreatments whose failure is determined by the persistence of bacteria in the endodontic canals.

The Role of Hydraulic Silicate Cements on Long-Term Properties and Biocompatibility of Partial Pulpotomy in Permanent Teeth

The use of hydraulic silicate cements (HSCs) for vital pulp therapy has been found to release calcium and hydroxyl ions promoting pulp tissue healing and mineralized tissue formation. The present study investigated whether HSCs such as mineral trioxide aggregate (MTA) affect their biological and antimicrobial properties when used as long-term pulp protection materials. The effect of variables on treatment outcomes of three HSCs (ProRoot MTA, OrthoMTA, and RetroMTA) was evaluated clinically and radiographically over a 48–78 month follow-up period. Survival analysis was performed using Kaplan–Meier survival curves. Fisher’s exact test and Cox regression analysis were used to determine hazard ratios of clinical variables. The overall success rate of MTA partial pulpotomy was 89.3%; Cumulative success rates of the three HSCs were not statistically different when analyzed by Cox proportional hazard regression analysis. None of the investigated clinical variables affected success rates significantly. These HSCs showed favorable biocompatibility and antimicrobial properties in partial pulpotomy of permanent teeth in long-term follow-up, with no statistical differences between clinical factors.

Micro-Nano Surface Characterization and Bioactivity of a Calcium Phosphate-Incorporated Titanium Implant Surface

The surface topography of dental implants and micro-nano surface characterization have gained particular interest for the improvement of the osseointegration phases. The aim of this study was to evaluate the surface micro-nanomorphology and bioactivity (apatite forming ability) of Ossean^® surface, a resorbable blast medium (RBM) blasted surface further processed through the incorporation of a low amount of calcium phosphate. The implants were analyzed using environmental scanning electronic microscopy (ESEM), connected to Energy dispersive X-ray spectroscopy (EDX), field emission gun SEM-EDX (SEM-FEG) micro-Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) before and after immersion in weekly refreshed Hank’s balanced salt solution (HBSS) for 28 days. The analysis of the samples before immersion showed a moderately rough surface, with micropits and microgrooves distributed on all of the surface; EDX microanalysis revealed the constitutional elements of the implant surface, namely titanium (Ti), aluminum (Al) and vanadium (V). Limited traces of calcium (Ca) and phosphorous (P) were detected, attributable to the incorporated calcium phosphate. No traces of calcium phosphate phases were detected by micro-Raman spectroscopy. ESEM analysis of the implant aged in HBSS for 28 days revealed a significantly different surface, compared to the implant before immersion. At original magnifications <2000×, a homogeneous mineral layer was present on all the surface, covering all the pits and microgrooves. At original magnifications ≥10,000×, the mineral layer revealed the presence of small microspherulites. The structure of these spherulites (approx. 2 µm diameter) was observed in nanoimmersion mode revealing a regular shape with a hairy-like contour. Micro-Raman analysis showed the presence of B-type carbonated apatite on the implant surface, which was further confirmed by XPS analysis. This implant showed a micro-nano-textured surface supporting the formation of a biocompatible apatite when immersed in HBSS. These properties may likely favor bone anchorage and healing by stimulation of mineralizing cells.

Calcium Silicate-Activated Gelatin Methacrylate Hydrogel for Accelerating Human Dermal Fibroblast Proliferation and Differentiation

Wound healing is a complex process that requires specific interactions between multiple cells such as fibroblasts, mesenchymal, endothelial, and neural stem cells. Recent studies have shown that calcium silicate (CS)-based biomaterials can enhance the secretion of growth factors from fibroblasts, which further increased wound healing and skin regeneration. In addition, gelatin methacrylate (GelMa) is a compatible biomaterial that is commonly used in tissue engineering. However, it has low mechanical properties, thus restricting its fullest potential for clinical applications. In this study, we infused Si ions into GelMa hydrogel and assessed for its feasibility for skin regeneration applications by observing for its influences on human dermal fibroblasts (hDF). Initial studies showed that Si could be successfully incorporated into GelMa, and printability was not affected. The degradability of Si-GelMa was approximately 20% slower than GelMa hydrogels, thus allowing for better wound healing and regeneration. Furthermore, Si-GelMa enhanced cellular adhesion and proliferation, therefore leading to the increased secretion of collagen I other important extracellular matrix (ECM) remodeling-related proteins including Ki67, MMP9, and decorin. This study showed that the Si-GelMa hydrogels were able to enhance the activity of hDF due to the gradual release of Si ions, thus making it a potential candidate for future skin regeneration clinical applications.

Regenerating the Pulp-Dentine Complex Using Autologous Platelet Concentrates: A Critical Appraisal of the Current Histological Evidence

Background:

Autologous platelet concentrates such as platelet-rich plasma (PRP) and platelet-rich fibrin (PRF) have gained overwhelming popularity in regenerative endodontics. Clinical evidence reveals the lack of a particular advantage of using PRP or PRF over an evoked blood clot in promoting canal wall thickening and/or continued root development in immature necrotic teeth. Moreover, despite stimulating tissue repair and repopulating the root canals of immature and mature permanent teeth, the new vital tissue may not possess the functional activity of the native pulp tissue.

Methods:

To better understand the origin, nature, and long-term fate of the tissue types found within the pulp space, we critically examine all available histo-/morphological evidence for pulp–dentine complex regeneration using PRP and/or PRF, alone or together with an evoked blood clot, specialised or unspecialised primary cells, and other biomaterials.

Results:

Histological data from clinical studies is scant. Reportedly, the inner dentinal surface supports cementum-like tissue formation, but this interface likely deviates in structure and function from the native cementodentinal junction. Presence of bone-like tissue within the pulp space is intriguing since de novo osteogenesis requires closely coordinated recruitment and differentiation of osteoprogenitor cells. Compared to untreated necrotic teeth, an evoked blood clot (with/without PRF) improves fracture resistance. Tooth regeneration using PRF and dental bud cells is unreliable and the constituent neoformed tissues are poorly organised.

Conclusion:

PRP/PRF fail to demonstrate a significant advantage over an induced blood clot, alone. The true nature of neoformed tissues remains poorly characterised while their response to subsequent insult/injury is unexplored.

Material Pulp Cells and Tissue Interactions

Two increasingly common endodontic procedures, vital pulp therapy (VPT) and regenerative endodontic procedures, rely on dental tissue regeneration/repair mechanisms with the aid of biomaterials. These materials are applied in close contact to the pulpal tissue and are required to be biocompatible, form an antimicrobial seal, not induce staining, and be easy to manipulate. Historically, calcium hydroxide played an important role in VPT. However, over the last 3 decades, significant efforts in research and industry have been made to develop various biomaterials, including hydraulic tricalcium silicate cements. The present review summarized various hydraulic tricalcium silicate cements and their biological properties in clinical procedures, namely VPT and regenerative endodontic procedures.

GuttaFlow® Bioseal Cytotoxicity Assessment: In Vitro Study

The sealers used for root canal treatment should be biocompatible for the peri-radicular tissues, to evaluate the cytotoxic effects of GuttaFlow® bioseal sealer and to compare them with AH26® epoxy resin. Culture media were conditioned with the GuttaFlow® bioseal and AH26® pellets. MDPC-23 odontoblast cell cultures were treated with conditioned medium and serial dilutions. To evaluate the metabolic activity and cellular viability, the MTT and SRB assays were performed. To determine the production of reactive oxygen species, the DHE and DCF-DA probes were used. Cell cycle and cell-death types were assessed by cytometry, and to evaluate the mineralization capacity, the Alizarin Red S coloration was used. Statistical analysis was performed using analysis of variance (ANOVA) when normality was found and Kruskal-Wallis on the opposite case. For the comparison with normality values, the Student t-test was used. Cells exposed to the GuttaFlow® bioseal conditioned medium maintained high metabolic activities, except at higher concentrations. Likewise, viability was maintained, but a significant decrease was observed after exposure to the highest concentration (p < 0.001), associated with cell death by late apoptosis and necrosis. When cell cultures were exposed to AH26®, metabolic activity was highly compromised, resulting in cell death. An imbalance in the production of peroxides and superoxide anion was observed. GuttaFlow® bioseal showed higher biocompatibility than AH26®.

Caffeic Acid-coated Nanolayer on Mineral Trioxide Aggregate Potentiates the Host Immune Responses, Angiogenesis, and Odontogenesis

INTRODUCTION

The aim of this study was to investigate whether mineral trioxide aggregate (MTA) can be modified with caffeic acid (CA) to form caffeic acid/mineral trioxide aggregate (CAMTA) cement and to evaluate its physicochemical and biological properties as well as its capability in immune suppression and angiogenesis.

METHODS

MTA was immersed in trishydroxymethyl aminomethane buffer with CA to allow coating onto MTA powders. X-ray diffractometry and tensile stress-strain tests were conducted to assess for physical characteristics of CAMTA and to evaluate for successful modification of MTA. Then, the CAMTA cement was immersed in simulated body fluid to evaluate its hydroxyapatite formation capabilities and Si release profiles. In addition, RAW 264.7 cells and human dental pulp stem cells were used to evaluate CAMTA's immunosuppressive capabilities and cell responses, respectively. hDPSCs were also used to assess CAMTA's angiogenic capabilities.

RESULTS

The X-ray diffractometry results showed that CA can be successfully coated onto MTA without disrupting or losing MTA's original structural properties, thus allowing us to retain the initial advantages of MTA. CAMTA was shown to have higher mechanical properties compared with MTA and had rougher pitted surfaces, which were hypothesized to lead to enhanced adhesion, proliferation, and secretion of angiogenic- and odontogenic-related proteins. In addition, it was found that CAMTA was able to enhance hydroxyapatite formation and immunosuppressive capabilities compared with MTA.

CONCLUSIONS

CAMTA cements were found to have improved physicochemical and biological characteristics compared with their counterpart. In addition, CAMTA cements had enhanced odontogenic, angiogenic, and immunosuppressive properties compared with MTA. All of the results of this study proved that CAMTA cements could be a biomaterial for future clinical applications and tissue engineering use.

The use of photobiomodulation therapy or LED and mineral trioxide aggregate improves the repair of complete tibial fractures treated with wire osteosynthesis in rodents

The repair of large bone defects is lengthy and complex. Both biomaterials and phototherapy have been used to improve bone repair. We aimed to describe histologically the repair of tibial fractures treated by wiring (W), irradiated or not, with laser (λ780 nm, 70 mW, CW, spot area of 0.5 cm², 20.4 J/cm² (4 × 5.1 J/cm², Twin Flex Evolution®, MM Optics, Sao Carlos, SP, Brazil) per session, 300 s, 142.8 J/cm² per treatment) or LED (λ850 ± 10 nm, 150 mW, spot area of 0.5 cm², 20.4 J/cm² per session, 64 s, 142.8 J/cm² per treatment, Fisioled®^, MM Optics, Sao Carlos, Sao Paulo, Brazil) and associated or not to the use of mineral trioxide aggregate (MTA, Angelus®, Londrina, PR, Brazil). Inflammation was discrete on groups W and W + LEDPT and absent on the others. Phototherapy protocols started immediately before suturing and repeated at every other day for 15 days. Collagen deposition intense on groups W + LEDPT, W + BIO-MTA + LaserPT and W + BIO-MTA + LEDPT and discrete or moderate on the other groups. Reabsorption was discrete on groups W and W + LEDPT and absent on the other groups. Neoformation varied greatly between groups. Most groups were partial and moderately filed with new-formed bone (W, W + LaserPT, W + LEDPT, W + BIO-MTA + LEDPT). On groups W + BIO-MTA and W + BIO-MTA + LaserPT bone, neoformation was intense and complete. Our results are indicative that the association of MTA and PBMT (λ = 780 nm) improves the repair of complete tibial fracture treated with wire osteosynthesis in a rodent model more efficiently than LED (λ = 850 ± 10 nm).

The Use of ESEM-EDX as an Innovative Tool to Analyze the Mineral Structure of Peri-Implant Human Bone

This study aimed to investigate the mineralization and chemical composition of the bone–implant interface and peri-implant tissues on human histological samples using an environmental scanning electron microscope as well as energy-dispersive x-ray spectroscopy (ESEM-EDX) as an innovative method. Eight unloaded implants with marginal bone tissue were retrieved after four months from eight patients and were histologically processed and analyzed. Histological samples were observed under optical microscopy (OM) to identify the microarchitecture of the sample and bone morphology. Then, all samples were observed under ESEM-EDX from the coronal to the most apical portion of the implant at 500x magnification. A region of interest with bone tissue of size 750 × 500 microns was selected to correspond to the first coronal and the last apical thread (ROI). EDX microanalysis was used to assess the elemental composition of the bone tissue along the thread interface and the ROI. Atomic percentages of Ca, P, N, and Ti, and the Ca/N, P/N and Ca/P ratios were measured in the ROI. Four major bone mineralization areas were identified based on the different chemical composition and ratios of the ROI. Area 1: A well-defined area with low Ca/N, P/N, and Ca/P was identified as low-density bone. Area 2: A defined area with higher Ca/N, P/N, and Ca/P, identified as new bone tissue, or bone remodeling areas. Area 3: A well-defined area with high Ca/N, /P/N, and Ca/P ratios, identified as bone tissue or bone chips. Area 4: An area with high Ca/N, P/N, and Ca/P ratios, which was identified as mature old cortical bone. Bone Area 2 was the most represented area along the bone–implant interface, while Bone Area 4 was identified only at sites approximately 1.5 mm from the interface. All areas were identified around implant biopsies, creating a mosaic-shaped distribution with well-defined borders. ESEM-EDX in combination with OM allowed to perform a microchemical analysis and offered new important information on the organic and inorganic content of the bone tissue around implants.

Contribution of Bone Marrow-derived Cells to Reparative Dentinogenesis Using Bone Marrow Transplantation Model

INTRODUCTION

The aim of this study was to analyze the contribution of bone marrow-derived cells (BMDCs) to reparative dentinogenesis using bone marrow transplantation (BMT) and pulp capping as an in vivo model.

METHODS

A chimeric mouse model was created through the injection of BMDCs expressing green fluorescent protein (GFP+ BMDCs) from C57BL/6 GFP+ transgenic donor mice into irradiated C57BL/6 wild-type recipient mice (GFP- mice). These GFP- chimeric mice (containing transplanted GFP+ BMDCs) were subjected to microscopic pulp exposure and capping with white mineral trioxide aggregate (n = 18) or Biodentine (Septodont, St Maur-des-Fossés, France) (n = 18) in the maxillary first molar. Maxillary arches from GFP- chimeric mice (with the capped tooth) were isolated and histologically processed 5 (n = 9) and 7 (n = 9) weeks after BMT. Confocal laser microscopy and immunohistochemical analysis were performed to assess the presence of GFP+ BMDCs and the expression of dentin sialoprotein, an odontoblast marker, for those cells contributing to reparative dentinogenesis in the dental pulp.

RESULTS

Confocal laser microscopic analyses evidenced the presence of GFP+ BMDCs in close association with reparative dentin synthesized at the site of pulp exposure in GFP- mice 5 and 7 weeks after BMT. Immunohistochemical analysis revealed that GFP+ BMDCs in close association with reparative dentin expressed DSP, suggesting the contribution of nonresident GFP+ BMDCs to reparative dentinogenesis.

CONCLUSIONS

These data suggest the presence of nonresident BMDCs in reparative dentinogenesis and its contribution to dental pulp regeneration in the pulp healing process.

Bioactive tri/dicalcium silicate cements for treatment of pulpal and periapical tissues

Over 2500 articles and 200 reviews have been published on the bioactive tri/dicalcium silicate dental materials. The indications have expanded since their introduction in the 1990s from endodontic restorative and pulpal treatments to endodontic sealing and obturation. Bioactive ceramics, based on tri/dicalcium silicate cements, are now an indispensable part of the contemporary dental armamentarium for specialists including endodontists, pediatric dentists, oral surgeons andfor general dentists. This review emphasizes research on how these materials have conformed to international standards for dental materials ranging from biocompatibility (ISO 7405) to conformance as root canal sealers (ISO 6876). Potential future developments of alternative hydraulic materials were included. This review provides accurate materials science information on these important materials. STATEMENT OF SIGNIFICANCE: The broadening indications and the proliferation of tri/dicalcium silicate-based products make this relatively new dental material important for all dentists and biomaterials scientists. Presenting the variations in compositions, properties, indications and clinical performance enable clinicians to choose the material most suitable for their cases. Researchers may expand their bioactive investigations to further validate and improve materials and outcomes.

Biocompatibility of new bioactive resin composite versus calcium silicate cements: an animal study

Background

The purpose of this study was to compare the biocompatibility of three bioactive materials, namely ACTIVA bioactive restorative resin composite, iRoot BP plus and Mineral Trioxide Aggregate (MTA) Angelus-HP.

Methods

Seventy-five Wistar male rats were subjected to subcutaneous implantation of four polyethylene tubes; one empty tube was used as control (Group 1), and the other tubes were filled with ACTIVA (Group 2), iRoot BP (Group 3) and MTA-HP (Group 4). Then, the rats were subdivided into 3 groups according to the sacrification time into one, two and 4 weeks (n = 25 rats). Tissue specimens were submitted to histopathological and immunohistochemical analysis of α-SMA and caspase 3.

Results

The one-way Anova test revealed that ACTIVA group exhibited minimal inflammation in comparison to calcium silicate cements (iRoot BP and MTA-HP groups). iRoot BP group significantly revealed a more severe degree of chronic inflammation in comparison to other groups (P < 0.05). ACTIVA group showed marked regression of inflammation and fibrosis comparable to the control, while iRoot BP group revealed remarkable fibrosis and calcification, with less degrees in MTA-HP group (P < 0.05). Immunostaining of both α-SMA and caspase 3 revealed lower indexes in ACTIVA group consistent with the control (P < 0.05).

Conclusions

ACTIVA showed a higher degree of biocompatibility to subcutaneous tissues in comparison to both iRoot BP and MTA-HP cements in regard to decrease the intensity of inflammation, with subsequent fibrous connective tissue remodeling and better healing patterns.

Clinical significance

Preliminary data suggests that the application of ACTIVA in retrograde fillings.

Bioactivity potential of Portland cement in regenerative endodontic procedures: From clinic to lab

OBJECTIVE

The aim of this study was to evaluate the bioactivity potential of an hydraulic calcium-silicate cement, Pure Portland Cement Med-PZ (Medcem, Weinfelden, Switzerland: 'MPC'), applied in a tooth extracted because of failed regenerative endodontic procedures (REP) and by means of ex vivo (EV) specimens.

METHODS

Ten EV cylindrical dentin cavities were prepared and filled with MPC and stored for 1 month in distilled water (DW), Hank's balanced salt solution (HBSS), Dulbecco's phosphate-buffered saline (DPBS), simulated body fluid (SBF), versus no media (NM) serving as control. Six additional EV specimens were filled with MPC and exposed for 2 weeks to leucocyte-and-platelet-rich fibrin (LPRF)-clot (C), LPRF-membrane (M) and LPRF-exudate (E). MPC in the EV specimens and in the coronal part of the REP tooth was analyzed by means of micro-Raman spectroscopy (MR), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS).

RESULTS

SEM showed rough crystallite surfaces for the EV samples and a porous surface for the REP tooth. EDS of the EV samples revealed prominent peaks for Ca, Si and O. Storage in HBSS, DPBS, SBF, exposure to LPRF and the REP tooth showed considerable amounts of P as well. MR exhibited vibrations of phosphate (DPBS, SBF), carbonated hydroxyapatite (DPBS, SBF), calcium carbonate (DW, HBSS, NM, REP-tooth, LPRF-E), oxidized (ferric) proteins (LPRF-E/C/M) and the amide III band (all samples). Hence, only storage of MPC in DPBS and SBF for 1 month revealed bioactivity.

SIGNIFICANCE

The environmental conditions, namely the laboratory and clinical settings, affect the bioactivity potential of MPC.

Histopathological, histoenzymological, immunohistochemical and immunofluorescence analysis of tissue response to sealing materials after furcation perforation

AIM

To evaluate in vivo tissue responses after sealing furcation perforations in dog's teeth with either Biodentine™, mineral trioxide aggregate (MTA) or gutta-percha, by means of histopathological, histoenzymological, immunohistochemical and immunofluorescence analysis.

METHODOLOGY

After root canal treatment, perforations were created in the central region of the pulp chamber floor using a round diamond bur and filled with one or other of the materials. The animals were euthanized after 120 days, and the teeth (n = 30) were processed for histopathological analysis of new mineralized tissue formation and collagen fibre reinsertion, immunohistochemical analysis of osteopontin (OPN) and alkaline phosphatase (ALP) and immunofluorescence analysis for bone morphogenetic protein (BMP-2), cementum attachment protein (CAP), bone sialoprotein (BSP), osteocalcin (OCN) and cementum protein1 (CEMP1). Histoenzymology was performed for TRAP activity and osteoclast count. Data were analysed statistically (α = 0.05) using chi-square and Kruskal-Wallis tests.

RESULTS

Gutta-percha did not induce mineralized tissue formation. MTA and Biodentine^TM formed mineralized tissue in 88% and 92% of specimens, respectively, with no significant difference (P > 0.05). Gutta-percha was associated with scattered collagen fibres parallel to the perforations. Groups treated with MTA or Biodentine^TM had partial fibre reinsertion perpendicular to the newly formed mineralized tissue. All materials induced OPN and ALP expression, weakest for gutta-percha and strongest for MTA (P < 0.05). Only MTA induced BMP-2, BSP, OCN, CAP and CEMP1 expression. Osteoclast counts were similar in all groups (P = 0.97).

CONCLUSIONS

Mineral trioxide aggregate and Biodentine^TM were biocompatible, with formation of mineralized tissue and partial reinsertion of collagen fibres. In addition, the participation of several molecules by which calcium silicate-based materials induce the formation of mineralized tissue were noted, with expression of ALP and OPN mineralization markers, without interference in the number of osteoclasts. Only MTA stimulated the expression of proteins associated with the formation of a cementum-like mineralized tissue.

PLA-Based Mineral-Doped Scaffolds Seeded with Human Periapical Cyst-Derived MSCs: A Promising Tool for Regenerative Healing in Dentistry

Human periapical cyst mesenchymal stem cells (hPCy-MSCs) are a newly discovered cell population innovatively collected from inflammatory periapical cysts. The use of this biological waste guarantees a source of stem cells without any impact on the surrounding healthy tissues, presenting a valuable potential in tissue engineering and regenerative medicine applications. In the present study, hPCy-MSCs were collected, isolated, and seeded on three experimental mineral-doped porous scaffolds produced by the thermally-induced phase-separation (TIPS) technique. Mineral-doped scaffolds, composed of polylactic acid (PLA), dicalcium phosphate dihydrate (DCPD), and/or hydraulic calcium silicate (CaSi), were produced by TIPS (PLA-10CaSi, PLA-5CaSi-5DCPD, PLA-10CaSi-10DCPD). Micro-CT analysis evaluated scaffolds micromorphology. Collected hPCy-MSCs, characterized by cytofluorimetry, were seeded on the scaffolds and tested for cell proliferation, cells viability, and gene expression for osteogenic and odontogenic differentiation (DMP-1, OSC, RUNX-2, HPRT). Micro-CT revealed an interconnected highly porous structure for all the scaffolds, similar total porosity with 99% open pores. Pore wall thickness increased with the percentage of CaSi and DCPD. Cells seeded on mineral-doped scaffolds showed a superior proliferation compared to pure PLA scaffolds (control), particularly on PLA-10CaSi-10DCPD at day 12. A higher number of non-viable (red stained) cells was observable on PLA scaffolds at days 14 and 21. DMP-1 expression increased in hPCy-MSCs cultured on all mineral-doped scaffolds, in particular on PLA-5CaSi-5DCPD and PLA-10CaSi-10DCPD. In conclusion, the innovative combination of experimental scaffolds colonized with autologous stem cells from periapical cyst represent a promising strategy for regenerative healing of periapical and alveolar bone.

Effect of ProRoot MTA® and Biodentine® on osteoclastic differentiation and activity of mouse bone marrow macrophages

Objectives

This investigation aimed to assess the differentiation inhibitory effects of ProRoot MTA^® (PMTA) and Biodentine^® (BIOD) on osteoclasts originated from murine bone marrow macrophages (BMMs) and compare these effects with those of alendronate (ALD).

Materials and Methods

Mouse BMMs were cultured to differentiate into osteoclasts with macrophage colony-stimulating factor and receptor activator of NF-κB (RANKL), treated with lipopolysaccharide. After application with PMTA, BIOD, or ALD, cell toxicities were examined using WST-1 assay kit, and RANKL-induced osteoclast differentiation and activities were determined by resorption pit formation assay and tartrate-resistant acid phosphate (TRAP) staining. The mRNA levels of osteoclast activity-related genes were detected with quantitative real time polymerase chain reaction. Expressions of molecular signaling pathways were assessed by western blot. All data were statistically analyzed with one-way ANOVA and Tukey's post-hoc test (p<0.05).

Results

Mouse BMMs applied with PMTA, BIOD, or ALD showed highly reduced levels of TRAP-positive osteoclasts. The BIOD treated specimens suppressed mRNA expressions of cathepsin K, TRAP, and c-Fos. Nonetheless, it showed a lower effect than PMTA or ALD applications. Compared with ALD, PMTA and BIOD decreased RANKL-mediated phosphorylation of ERK1/2 and IκBα.

Conclusions

PMTA and BIOD showed the inhibitory effect on osteoclast differentiation and activities similar to that of ALD through IκB phosphorylation and suppression of ERK signaling pathways.

Demineralization, Collagen Modification and Remineralization Degree of Human Dentin after EDTA and Citric Acid Treatments

The aim of the study was to investigate the effects of several decalcifying agents used as irrigant solutions in endodontic treatment on collagen and mineral components of dentin. Coronal dentin discs from five caries-free human third molars with a smear layer were treated for one minute with a chelating solution (1% Ethylenediaminetetraacetic acid (EDTA), 10% EDTA, 17% EDTA, 10% citric acid). Mineralization degree (Ca/N and P/N atomic ratios, IR I_apatite/I_{amide II} and I_{1410(carbonate)}/I_{554(phosphate)} spectroscopic ratios) and possible collagen rearrangements (collagen infrared (IR) amide II e III shifts) were evaluated by environmental scanning electron microscopy (ESEM)/energy dispersive X-ray spectroscopy (EDX) and IR spectroscopy before and after treatment (T0) and after ageing (T24h and T2m) in simulated body fluid (SBF). At T0, analysis showed that the highest demineralizing effect was achieved using a 10% citric acid solution and 10% EDTA, while the smallest effect was observed when using 17% EDTA. No significant collagen modifications were detected upon treatment with 1% EDTA, while subtle changes were observed after the other treatments. At T24h or T2m, analyses showed the highest remineralization values for 1% EDTA and the lowest for 10% citric acid, mainly at T2m. The samples treated with 17% EDTA showed slight collagen rearrangements upon remineralization. In conclusion, the highest demineralizing effect was observed for 10% EDTA and 10% citric acid. Collagen rearrangement was found for all the treatments except for 1% EDTA. The highest remineralization capability in SBF values was recorded for 1% EDTA and the lowest for 10% citric acid. A slight collagen rearrangement upon remineralization was still present in 17% EDTA-treated samples. Clinical use as a chelating agent in the endodontic therapy of citric acid and concentrated EDTA solutions should be reconsidered.

Calcium phosphates as ion-releasing fillers in restorative resin-based materials

Calcium phosphates (CaP) are the main constituents of the mineral phase in bones and teeth and, along with calcium silicates and bioactive glasses, have been extensively investigated in remineralization of enamel and dentin. When used as ion-releasing fillers in resin-based materials, they could contribute to extend the service life of adhesive restorations, remineralize caries-affected dentin or prevent caries lesions under sealants and orthodontic brackets. However, the development of resin-based bioactive materials is not straightforward because of the several compositional variables involved in ion release. Also, CaP particles do not reinforce the material; therefore, if high mechanical properties are required, the ratio between CaP particles and reinforcing fillers must be observed. Several research groups have investigated how CaP phase, particle size and content, as well as resin matrix formulation affect remineralization, ion release kinetics and mechanical properties of these materials. This review presents an overview of the main findings reported in the literature.

Successful Regenerative Endodontic Procedure of a Nonvital Immature Permanent Central Incisor Using Amniotic Membrane as a Novel Scaffold

Successful regenerative endodontic procedure was performed in nonvital immature permanent central incisor (Stage-4 root development) using human amniotic membrane (HAM) as a novel scaffold. The treatment was performed according to the American Association of Endodontics guidelines with minimal canal instrumentation, 1% Sodium hypochlorite as irrigant and calcium hydroxide as intracanal medicament. During the second appointment, HAM was placed as a scaffold and Biodentine™ was layered over the HAM with glass ionomer cement and resin composite as coronal seal. Preoperative and post-operative cone beam computed tomography (at three years) was taken to assess the treatment outcome. The resolution of disease process and increase in canal width, as well as positive response to pulp sensitivity tests, were observed by the end of three years. There was approximately 78–86% reduction in the volume of periapical lesion size. This case report confirms that HAM can be used as a scaffold material for successful regenerative endodontic procedure (REP).

Calcium Charge and Release of Conventional Glass-Ionomer Cement Containing Nanoporous Silica

The aim of this study was to evaluate calcium charge and release of conventional glass-ionomer cement (GIC) containing nanoporous silica (NPS). Experimental specimens were divided into two groups: the control (GIC containing no NPS) and GIC-NPS (GIC containing 10 wt % NPS). The specimens were immersed in calcium chloride solutions of 5 wt % calcium concentration for 24 h at 37 °C, whereupon the calcium ion release of the specimens was measured. The calcium ion release behavior of GIC-NPS after immersion in the calcium solution was significantly greater than that of the control. Scanning electron microscopy and electron-dispersive X-ray spectroscopy results indicated that calcium penetrated inside the GIC-NPS specimen, while the calcium was primarily localized on the surface of the control specimen. It was demonstrated that NPS markedly improved the calcium charge and release property of GIC.

Bone tissue reaction, setting time, solubility, and pH of root repair materials

OBJECTIVES

This study aims to compare the bone tissue reaction, setting time, solubility, and pH of NeoMTA Plus, Biodentine (BD), and MTA Angelus (MTA-A).

MATERIALS AND METHODS

Initial and final setting times (n = 7) and solubility up to 7 days (n = 11) were evaluated in accordance with ASTM C266-15 and ANSI/ADA Specification No. 57, respectively. pH (n = 10) was measured up to 28 days. Bone tissue reactions in 48 rats' femur were histologically analyzed after 7, 30, and 90 days. ANOVA and Tukey's tests compared setting time, solubility, and pH data; bone reactions data were compared by Kruskal-Wallis and Dunn's tests.

RESULTS

NeoMTA Plus had longer initial and final setting times than MTA-A and BD (P < 0.05). At 7 days, BD showed the highest solubility, similar to NeoMTA Plus (P > 0.05) and different from MTA-A (P < 0.05). NeoMTA Plus had a progressive mass loss over time; at 7 days, it was significantly different from the initial mass (P < 0.05). BD showed higher pH in the periods assessed when compared to the other materials (P < 0.05). Bone tissue repair had no differences between groups in each experimental period (P > 0.05). All groups presented no difference from 30 to 90 days (P > 0.05) and had better bone repair at 90 days than at 7 days (P < 0.05).

CONCLUSIONS

NeoMTA Plus, BD, and MTA-A showed satisfactory setting time, high mass loss, alkaline pH, and allowed bone repair.

CLINICAL RELEVANCE

Calcium silicate-based cements are indicated for multiple clinical situations. NeoMTA Plus and BD showed satisfactory physical-chemical and biological properties, being considered as alternatives to MTA-A, as root repair materials for clinical use.

External cervical resorption: part 2 - management

Effective management of external cervical resorption (ECR) depends on accurate assessment of the true nature and accessibility of ECR; this has been discussed in part 1 of this 2 part article. This aim of this article was firstly, to review the literature in relation to the management of ECR and secondly, based on the available evidence, describe different strategies for the management of ECR. In cases where ECR is supracrestal, superficial and with limited circumferential spread, a surgical repair without root canal treatment is the preferred approach. With more extensive ECR lesions, vital pulp therapy or root canal treatment may also be indicated. Internal repair is indicated where there is limited resorptive damage to the external aspect of the tooth and/or where an external (surgical) approach is not possible due to the inaccessible nature of subcrestal ECR. In these cases, root canal treatment will also need to be carried out. Intentional reimplantation is indicated in cases where a surgical or internal approach is not practical. An atraumatic extraction technique and short extraoral period followed by 2-week splinting are important prognostic factors. Periodic reviews may be indicated in cases where active management is not pragmatic. Finally, extraction of the affected tooth may be the only option in untreatable cases where there are aesthetic, functional and/or symptomatic issues.

Intratubular Biomineralization in a Root Canal Filled with Calcium-Enriched Material over 8 Years

This case report describes intratubular biomineralization in root canal, filled with calcium-enriched material after 8 years of clinical maintenance. The schematic findings of dentinal tubules were investigated with scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The root canal obturation material was closely adapted to root dentin surface, suggesting the possibility of chemical bonding between the two interfaces. SEM and EDS observation of dentinal tubules showed intratubular biomineralized crystal structures with Ca/P ratio in a range of 1.30-2.12, suggesting bioactive capacity of calcium-enriched material.