Comparison of electrochemical method with ozonation, chlorination and monochloramination in drinking water disinfection

Hydroxyl radicals dominated the reduction of antibiotic resistance genes by inactivating Gram-negative bacteria during soil electrokinetic treatment

Antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) are emerging contaminants that widely exist in the environment. Effective reduction of ARB and ARGs from soil and water could be achieved by electrokinetic remediation (EKR) technology. In water, hydroxyl radicals (·OH) are proved to play a major role in the EKR process; while the reduction mechanism of ARB and ARGs is still unclear in soil. In this study, different concentrations of hydroxyl radical scavengers (salicylic acid) were added to the EKR system to explore the possible role of ·OH in the reduction of ARB and ARGs. The results showed that generally, ·OH played a more vital role in the reduction of ARB (65.24-72.46%) compared to the reduction of total cultivable bacteria (57.50%). And ·OH contributed to a higher reduction of sul genes (60.94%) compared to tet genes (47.71%) and integrons (36.02%). It was found that the abundance of Gram-negative bacteria (Chloroflexi, Acidobacteria and norank_c_Acidobacteria) was significantly reduced, and the correlation between norank_f_Gemmatimonadaceae and sul1 was weakened in the presence of ·OH. Correlation analysis indicated that the abundance of ARGs (especially sul1) was closely related to the Gram-negative bacteria (Proteobacteria, Acidobacteria, and Gemmatimonadetes) in the soil EKR treatment. Moreover, changes in bacterial community structure affected the abundance of ARB and ARGs indirectly. Overall, this study revealed the reduction mechanism of ARB and ARGs by ·OH in the soil EKR system for the first time. These findings provide valuable support for soil remediation efforts focusing on controlling antibiotic resistance.

Assessment of microorganisms in drinking water disinfected by catalytic ozonation with fluorinated ceramic honeycomb and NaClO disinfectants under laboratory and pilot conditions

While sodium hypochlorite (NaClO) has long been used to disinfect drinking water, concerns have risen over its use due to causing potentially hazardous byproducts. Catalytic ozonation with metal-free catalysts has attracted increasing attention to eliminate the risk of secondary pollution of byproducts in water treatment. Here, we compared the disinfection efficiency and microbial community of catalytic ozone with a type of metal-free catalyst fluorinated ceramic honeycomb (FCH) and NaClO disinfectants under laboratory- and pilot-scale conditions. Under laboratory conditions, the disinfection rate of catalytic ozonation was 3∼6-fold that of ozone when the concentration of Escherichia coli was 1 × 106 CFU/ml, and all E. coli were killed within 15 s. However, 0.65 mg/L NaClO retained E. coli after 30 min using the traditional culturable approach. The microorganism inactivation results of raw reservoir water disinfected by catalytic ozonation and ozonation within 15 s were incomparable based on the cultural method. In pilot-scale testing, catalytic ozonation inactivated all environmental bacteria within 4 min, while 0.65 mg/L NaClO could not achieve this success. Both catalytic ozonation and NaClO-disinfected methods significantly reduced the number of microorganisms but did not change the relative abundances of different species, i.e., bacteria, viruses, eukaryotes, and archaea, based on metagenomic analyses. The abundance of virulence factors (VFs) and antimicrobial resistance genes (ARGs) was detected few in catalytic ozonation, as determined by metagenomic sequencing. Some VFs or ARGs, such as virulence gene 'FAS-II' which was hosted by Mycobacterium_tuberculosis, were detected solely by the NaClO-disinfected method. The enriched genes and pathways of cataO3-disinfected methods exhibited an opposite trend, especially in human disease, compared with NaClO disinfection. These results indicated that the disinfection effect of catalytic ozone is superior to NaClO, this finding contributed to the large-scale application of catalytic ozonation with FCH in practical water treatment.

Comprehensive assessment of chlorination disinfection on microplastic-associated biofilms

Chlorination on microplastic (MP) biofilms was comprehensively investigated with respect to disinfection efficiency, morphology, and core microbiome. The experiments were performed under various conditions: i) MP particles; polypropylene (PP) and polystyrene (PS), ii) MP biofilms; Escherichia coli for single-species and river water microorganisms for multiple-species, iii) different chlorine concentrations, and iv) different chlorine exposure periods. As a result, chlorination effectively inactivated the MP biofilm microorganisms. The disinfection efficiency increased with increasing the free chlorination concentration and exposure periods for both single- and multiple-species MP biofilms. The multiple-species MP biofilms were inactivated 1.3-6.0 times less than single-species MP biofilms. In addition, the PP-MP biofilms were more vulnerable to chlorination than the PS-MP biofilms. Morphology analysis verified that chlorination detached most MP biofilms, while a small part still remained. Interestingly, chlorination strongly changed the biofilm microbiome on MPs; the relative abundance of some microbes increased after the chlorination, suggesting they could be regarded as chlorine-resistant bacteria. Some potential pathogens were also remained on the MP particles after the chlorination. Notably, chlorination was effective in inactivating the MP biofilms. Further research should be performed to evaluate the impacts of residual MP biofilms on the environment.

Removal characteristics of 53 micropollutants during ozonation, chlorination, and UV/H2O2 processes used in drinking water treatment plant

The removal of 53 emerging micropollutants (MPs), including 10 per- and polyfluorinated substances (PFASs), 25 pharmaceuticals and personal care products (PPCPs), 7 pesticides, 5 endocrine disrupters (EDCs), 3 nitrosamines, and 3 taste and odor compounds (T&Os), by chlorination, ozonation, and UV/H2O2 treatment was examined in deionized water and surface waters used as the raw waters in drinking water treatment plants (DWTPs) in South Korea. The UV/H2O2 treatment was effective in the removal of most MPs, whereas chlorination was selectively effective for 19 MPs, including EDCs (>70 %). MPs containing aromatic ring with electron-donating functional group, or primary and secondary amines were effectively removed by chlorination immediately upon reaction initiation. The removal of MPs by ozonation was generally lower than that of the other two processes at a low ozone dose (1 mg L-1), but higher than chlorination at a high ozone dose (3 mg L-1), particularly for 16 MPs, including T&Os. Compared in deionized water, the removals of MPs in the raw water samples were lower in all three processes. The regression models predicting the rate constants (kobs) of 53 MPs showed good agreement between modeled and measured value for UV/H2O2 treatment (R2 = 0.948) and chlorination (R2 = 0.973), despite using only dissolved organic carbon (DOC) and oxidant concentration as variables, whereas the ozonation model showed a variation (R2 = 0.943). Our results can provide the resources for determining which oxidative process is suitable for treating specific MPs present in the raw waters of DWTPs.

On-site filtration of large sample volumes improves the detection of opportunistic pathogens in drinking water distribution systems

In this study, we compared conventional vacuum filtration of small volumes through disc membranes (effective sample volumes for potable water: 0.3-1.0 L) with filtration of high volumes using ultrafiltration (UF) modules (effective sample volumes for potable water: 10.6-84.5 L) for collecting bacterial biomass from raw, finished, and tap water at seven drinking water systems. Total bacteria, Legionella spp., Legionella pneumophila, Mycobacterium spp., and Mycobacterium avium complex in these samples were enumerated using both conventional quantitative PCR (qPCR) and viability qPCR (using propidium monoazide). In addition, PCR-amplified gene fragments were sequenced for microbial community analysis. The frequency of detection (FOD) of Legionella spp. in finished and tap water samples was much greater using UF modules (83% and 77%, respectively) than disc filters (24% and 33%, respectively). The FODs for Mycobacterium spp. in raw, finished, and tap water samples were also consistently greater using UF modules than disc filters. Furthermore, the number of observed operational taxonomic units and diversity index values for finished and tap water samples were often substantially greater when using UF modules as compared to disc filters. Conventional and viability qPCR yielded similar results, suggesting that membrane-compromised cells represented a minor fraction of total bacterial biomass. In conclusion, our research demonstrates that large-volume filtration using UF modules improved the detection of opportunistic pathogens at the low concentrations typically found in public drinking water systems and that the majority of bacteria in these systems appear to be viable in spite of disinfection with free chlorine and/or chloramine.IMPORTANCEOpportunistic pathogens, such as Legionella pneumophila, are a growing public health concern. In this study, we compared sample collection and enumeration methods on raw, finished, and tap water at seven water systems throughout the State of Minnesota, USA. The results showed that on-site filtration of large water volumes (i.e., 500-1,000 L) using ultrafiltration membrane modules improved the frequency of detection of relatively rare organisms, including opportunistic pathogens, compared to the common approach of filtering about 1 L using disc membranes. Furthermore, results from viability quantitative PCR (qPCR) with propidium monoazide were similar to conventional qPCR, suggesting that membrane-compromised cells represent an insignificant fraction of microorganisms. Results from these ultrafiltration membrane modules should lead to a better understanding of the microbial ecology of drinking water distribution systems and their potential to inoculate premise plumbing systems with opportunistic pathogens where conditions are more favorable for their growth.

Flow electrochemical inactivation of waterborne bacterial endospores

Waterborne pathogens have the risk of spreading waterborne diseases and even pandemics. Some Gram-positive bacteria can form endospores, the hardiest known life form that can withstand heat, radiation, and chemicals. Electrochemical inactivation may offer a promising solution, but is hindered by low inactivation efficiencies resulting from limitation of electrode/endospores interaction in terms of electrochemical reaction selectivity and mass transfer. Herein, these issues were addressed through modifying selectivity of active species formation using electroactive ceramic membrane with high oxygen evolution potential, improving mass transfer property by flow-through operation. In this way, inactivation (6.0-log) of Bacillus atrophaeus endospores was achieved. Theoretical and experimental results demonstrated synergistic inactivation to occur through fragmentation of coat via interfacial electron transfer and electro-produced transient radicals (•OH primarily, •Cl and Cl₂^•- secondarily), thereby increasing cell permeability to facilitate penetration of electro-produced persistent active chlorine for subsequent rupture of intracellular structures. Numbering-up electrode module strategy was proposed to scale up the system, achieving average 5.3-log inactivation of pathogenic Bacillus anthracis endospores for 30 days. This study demonstrates a proof-of-concept manner for effective inactivation of waterborne bacterial endospores, which may provide an appealing strategy for wide-range applications like water disinfection, bio-safety control and defense against biological warfare.

The protective role and mechanism of melanin for Aspergillus niger and Aspergillus flavus against chlorine-based disinfectants

Melanin is a critical component of fungal cell wall which protect fungi from adverse environmental tress. However, the role of melanin for fungi during the disinfection with chlorine-based disinfectants has not been elucidated. The results showed that the inactivation rate constants of Aspergillus niger with chlorine and chlorine dioxide decreased from 0.08 to 2.10 min^-1 to 0 after addition of 0.32 mg/L melanin. The results indicated addition of extracted fungal melanin inhibited the inactivation efficiency of chlorine and chlorine dioxide. In contrast, the k of Aspergillus niger after inactivation with monochloramine ranged from 1.50 to 1.78 min^-1 after addition of melanin which indicated effect of melanin on the inactivation efficiency of monochloramine was negligible. In addition, the extracted fungal melanin exhibited high reactivity with chlorine and chlorine dioxide but very low reactivity with monochloramine. The different inactivation mechanisms of chlorine-based disinfectants and different reactivity of melanin with chlorine-based disinfectants led to the different protective mechanism of melanin for A. niger and A. flavus spores against disinfection with chlorine-based disinfectants. The chlorine and chlorine dioxide appeared to react with functional groups of melanin in cell wall of spores, so sacrificial reactions between melanin and disinfectants decreased the available disinfectants and limited the diffusion of disinfectants to the reactive site on cell membrane, which led to the decrease of the disinfection efficiency for chlorine and chlorine dioxide. The monochloramine could penetrate into cell and damage DNA without the effect of melanin due to its strong penetration and low reactivity with melanin. Our results systematically demonstrate the protective roles of melanin on the fungal spores against chlorine-based disinfectants and the underlying mechanisms in resisting the environmental stress caused by chlorine-based disinfectants, which provides important implications for the control of fungi, especially for fungi producing melanin.

Disinfection of polymicrobial urines by electrochemical oxidation: Removal of antibiotic-resistant bacteria and genes

In this work, data obtained from the University Hospital Complex of Albacete (Spain) were selected as a case study to carry out the disinfection experiments. To do this, different configurations of electrochemical reactors were tested for the disinfection of complex urines. Results showed that 4-6 logs bacterial removal were achieved for every bacterium tested when working with a microfluidic flow-through reactor after 180 min (0.423 Ah dm^-3). The MIKROZON® cell reached a total disinfection after 60 min (1.212 Ah dm^-3), causing severe damages induced in the cell walls observed in SEM images. The concentration profiles of the electrogenerated disinfectants in solution could explain the differences observed. Additionally, a mean decrease in the ARGs concentration ranked as follows: bla_KPC (4.18-logs) > bla_TEM (3.96-logs) > ermB (3.23-logs) using the MIKROZON® cell. This electro-ozonizer could be considered as a suitable alternative to reduce the risk of antibiotic resistance spread. Hence, this study provides an insight into different electrochemical reactors for the disinfection of complex hospital urine matrices and contributes to reduce the spread of antibiotic resistance through the elimination of ARGs. A topic of great importance nowadays that needs to be further studied.

Changes in antibiotic resistance genotypes and phenotypes after two typical sewage disposal processes

Antibiotic resistome is a growing concern around the world. Wastewater treatment plants (WWTPs) have been identified as hotspots for antibiotic resistance gene (ARG) research. However, the distribution of antibiotic resistance genotypes and phenotypes in biofilm wastewater treatment system is poorly understood. In this study, the abundance and fate of antibiotic resistance genotypes and phenotypes in two typical wastewater treatment processes [biological aerated filter (BAF), anaerobic-oxic (A/O)] were quantitatively studied. The average removal rate of total ARGs was greater than 90%. In the biological treatment unit, the abundance of ARGs increased in the A/O unit and decreased in the biofilm unit. In addition, the resistance of tetracycline resistant bacteria changed after sewage disposal, which was closely related to the evolution of bacterial community. In total, the removal rate of resistance bacteria in A/O system was lower than that in BAF system. Genotypes were the basis of determining the phenotypes of microbial resistance. But it is necessary to pay close attention to antibiotic resistance phenotype due to its high variability. More specifically, antibiotic resistance mitigation in WWTPs should focus more on removing bacterial hosts to reduce the release of ARGs into the environment.

UV-induced activation of organic chloramine: Radicals generation, transformation pathway and DBP formation

Organic chloramines of little disinfection efficacy commonly exist in disinfection process (chlor(am)ination) due to the wide presence of organic amines in water, of which N-chlorodimethylamine (CDMA) is a typical one. For the first time, UV photolysis for the activation of CDMA was investigated. UV photolysis caused the cleavage of N-Cl bond in CDMA to form Cl^• and subsequently HO^•, both of which are dominant contributors to the destruction of model contaminant bisphenol A (BPA). Typical spectra of HO^• were detected by electron paramagnetic resonance (EPR) experiments, while spectra of reactive nitrogen species (RNS) were not detected during UV photolysis of CDMA. The increase of pH (6.0-8.0), HCO₃^-/CO₃^2-, Cl^- and nature organic matter inhibited the degradation of BPA. We proposed pathways of CDMA and BPA degradation based on the identified transformation products. UV photolysis of CDMA and BPA reduced the formation of N-nitrosodimethylamine (NDMA) at pH 8.0, but increased the formation of trichloronitromethane (TCNM) at pH 7.0 and 8.0. The increasing toxicity and the formation of TCNM and NDMA gave us a hint that formation of organic chloramines should be concerned.

The oxidative degradation of phenol via in situ H2O2 synthesis using Pd supported Fe-modified ZSM-5 catalysts

Bifunctional Pd/Fe-ZSM-5 catalysts promote pollutant degradation through in situ H2O2 synthesis.

Removal of antibiotic resistance genes and inactivation of antibiotic-resistant bacteria by oxidative treatments

The persistence of antibiotics in the environment because of human activities, such as seafood cultivation, has attracted great attention as they can give rise to antibiotic resistance genes (ARGs) and antibiotic-resistant bacteria (ARB). In this study, we explored the inactivation and removal efficiencies of Escherichia coli SR1 and sul1 (plasmid-encoded ARGs), respectively, in their extracellular and intracellular forms (eARGs and iARGs) by three commonly used fishery oxidants, namely chlorine, bromine, and potassium permanganate (KMnO₄), at the practical effective concentration range (0.5, 5, and 15 mg/L). Kinetics data were obtained using laboratory phosphate-buffered saline (PBS). Following the same fishery oxidation methods, the determined kinetics models were tested by studying the SR1 and sul1 disinfection efficiencies in (sterilized) pond water matrix. At concentrations of 5 and 15 mg/L, all three oxidants achieved sufficient cumulative integrated exposure (CT values) to completely inactivate SR1 and efficiently remove sul1 (up to 4.0-log). The oxidation methods were then applied to an unsterilized pond water matrix in order to study and evaluate the indigenous ARB and ARGs disinfection efficiencies in aquaculture, which reached 1.4-log and 1.0-log during treatment with fishery oxidants used in pond preparation at high concentrations before stocking (5-15 mg/L), respectively. A high chlorine concentration (15 mg/L) could efficiently remove ARGs (or iARGs) from pond water, and the iARG removal efficiency was higher than that of eARGs in pond water. The method and results of this study could aid in guiding future research and practical disinfection to control the spread of ARGs and ARB in aquaculture.

Effects of microbial inactivation approaches on quantity and properties of extracellular polymeric substances in the process of wastewater treatment and reclamation: A review

Microbial extracellular polymeric substances (EPS) have a profound role in various wastewater treatment and reclamation processes, in which a variety of technologies are used for disinfection and microbial growth inhibition. These treatment processes can induce significant changes in the quantity and properties of EPS, and altered EPS could further adversely affect the wastewater treatment and reclamation system, including membrane filtration, disinfection, and water distribution. To clarify the effects of microbial inactivation approaches on EPS, these effects were classified into four categories: (1) chemical reactions, (2) cell lysis, (3) changing EPS-producing metabolic processes, and (4) altering microbial community. Across these different effects, treatments with free chlorine, methylisothiazolone, TiO₂, and UV irradiation typically enhance EPS production. Among the residual microorganisms in EPS matrices after various microbial inactivation treatments, one of the most prominent is Mycobacterium. With respect to EPS properties, proteins and humic acids in EPS are usually more susceptible to treatment processes than polysaccharides. The affected EPS properties include changes in molecular weight, hydrophobicity, and adhesion ability. All of these changes can undermine wastewater treatment and reclamation processes. Therefore, effects on EPS quantity and properties should be considered during the application of microbial inactivation and growth inhibition techniques.

Effects of process factors on the performance of electrochemical disinfection for wastewater in a continuous-flow cell reactor

Although electrochemical disinfection has been shown to be an effective approach to inactivate bacteria in saline water, the effects of process parameters and reactor design for its application in low-salinity water have not been well understood. In this study, factorial experiments were performed to investigate the direct and confounded effects of applied current (5-20 mA), contact time (2.5-20 min), anode surface area (185-370 cm²), and chloride concentration (50-400 mg L^-1) on the disinfection efficiency in fresh water and the secondary effluent of municipal wastewater. An electrochemical disinfection reactor cell with an internal volume of 75 cm³ was designed and fabricated. Residence time distribution analysis showed that the internal mixing of the reactor is similar to that of a dispersed plug-flow reactor. All studied process parameters showed significant effect on the kill efficiency, with the applied current and contact time having the most dominant effect. Although the effect of chloride concentration, which is responsible for electrochemical production of free chlorine in water, is statistically significant, it is not as prominent as those reported for high salinity water. A synergistic effect between chloride concentration and anode surface area was identified, leading to high kill efficiency (99.9%, 3 log kill) at low current density (0.0135 mA cm^-2). Response surface modeling results suggested that a scaled-up disinfection reactor can be designed using large anode surface area with long contact time for high chloride water (400 mg L^-1) or high current density with short contact time for low chloride water (50 mg L^-1). The power requirement of a portable system treating 37.85 m³ day^-1 (10,000 gpd) of municipal wastewater was estimated to be 1.9 to 8.3 kW to achieve a 3 log kill, depending on the reactor design.

Surficial N+ charge density indicating antibacterial capacity of quaternary ammonium resins in water environment

The antibacterial effects of quaternary ammonium resins (QARs) have been reported for decades, but there are few practical applications because of limited improvements in bactericidal capacity and the absence of an efficient antibacterial-indicating parameter. An in-situ determination method of surficial N⁺ groups for QARs, defined as surficial N⁺ charge density, was first established to merely quantify the exposed surficial quaternary ammonium groups (QAs). The mechanism of the new method depends on the tetraphenylboron sodium standard solution (TS), which is a colloidal solution with high steric hindrance, making it difficult to permeate into QARs and further react with the inner QAs. The results showed that the antibacterial efficacy of QARs correlates with the surficial N⁺ charge density with R² > 0.95 (R² of 0.97 for Escherichia coli, R² of 0.96 for Staphylococcus aureus) but not with the strong-base group exchange capacity or zeta potential. Furthermore, the surficial N⁺ charge density was demonstrated efficient to indicate the antibacterial capacities against both gram-negative and gram-positive bacteria for commercial QARs, including acrylic, styrene and pyridine resin skeletons, especially for the QARs with similar skeletons and similar QAs. Based on the finding that the bactericidal groups merely involve the surficial QAs of QARs, this study proposes a new direction for improving the antibacterial capacity by enriching the surficial QAs and enhancing the bactericidal property of these surficial QAs, and provides a practicable synthesis with two-step quaternization.

Inactivation of antibiotic-resistant bacteria and antibiotic resistance genes by electrochemical oxidation/electro-Fenton process

Antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) in the environment are of great concern due to their potential risk to human health. The effluents from wastewater treatment plants and livestock production are major sources of ARB and ARGs. Chlorination, UV irradiation, and ozone disinfection cannot remove ARGs completely. In this study, the potential of electrochemical oxidation and electro-Fenton processes as alternative treatment technologies for inactivation of ARB and ARGs in both intracellular and extracellular forms was evaluated. Results showed that the electrochemical oxidation process was effective for the inactivation of selected ARB but not for the removal of intracellular ARGs or extracellular ARGs. The electro-Fenton process was more effective for the removal of both intracellular and extracellular ARGs. The removal efficiency after 120 min of electro-Fenton treatment under 21.42 mA/cm² was 3.8 logs for intracellular tetA, 4.1 logs for intracellular ampC, 5.2 logs for extracellular tetA, and 4.8 logs for extracellular ampC, respectively in the presence of 1.0 mmol/L Fe²⁺. It is suggested that electrochemical oxidation is an effective disinfection method for ARB and the electro-Fenton process is a promising technology for the removal of both intracellular and extracellular ARGs in wastewater.

Effects of UV disinfection on phenotypes and genotypes of antibiotic-resistant bacteria in secondary effluent from a municipal wastewater treatment plant

To elucidate the effects of UV disinfection on antibiotic resistance in biologically-treated wastewater, we investigated the antibiotic resistance profiles, species of cultivable heterotrophic bacteria, and antibiotic-resistance genes (ARGs) in antibiotic-resistant bacteria before and after treatment. UV disinfection greatly changed the bacterial community structure and the antibiotic resistance in wastewater. The antibiotic resistance in wastewater samples was strongly associated with the bacterial community. The proportions of Gram-positive bacteria gradually increased with increasing UV fluence. The proportions of bacteria resistant to cephalexin, penicillin, and vancomycin all greatly decreased after UV treatment in both sampling events (July 2018 and January 2019), and those for bacteria resistant to ofloxacin, ciprofloxacin, and sulfadiazine increased, resulting from the alternative antibiotic resistance profiles among different genera. UV disinfection induced the selection of multi-antibiotic resistant (MAR) bacteria. For example, the MAR indices of Aeromonas, the dominant genus during the treatments, were significantly increased after UV irradiation (P < 0.05). The MAR index was also markedly increased (P < 0.05) at a fluence of 5 mJ/cm² in both events. In UV10 treatment, the bacterial community structure was greatly changed. The genera with relatively low MAR indices replaced that with high MAR indices, and became the dominant genera. As a result, the MAR indices of treated samples showed a decreased trend after 10 mJ/cm² UV irradiation. The detection frequencies of ARGs located on the chromosome varied mainly due to the evolution of the microbial community. The occurrence of ARGs (tetA, tetC, tetM, tetW, tetX, and sul1) located on plasmid DNA decreased after UV disinfection, and the average detection frequencies of tet and sul genes decreased by 15% and 6%, respectively (P < 0.05). Generally speaking, the effect of UV disinfection on the enrichment of antibiotic resistance is limited in this study, and horizontal gene transfer via the plasmids in surviving bacteria might be impaired due to the decreased abundance of ARGs on the plasmids.

Electrochemical Oxidation/Disinfection of Urine Wastewaters with Different Anode Materials

In the present work, electrochemical technology was used simultaneously for the deactivation of microorganisms and the destruction of micro-pollutants contained in synthetic urine wastewaters. Microorganisms (E. coli) were added to synthetic urine wastewaters to mimic secondary treated sewage wastewaters. Different anode materials were employed including boron-doped diamond (BDD), dimensionally stable anode (DSA: IrO₂ and RuO₂) and platinum (Pt). The results showed that for the different anode materials, a complete deactivation of E. coli microorganisms at low applied electric charge (1.34 Ah dm⁻³) was obtained. The complete deactivation of microorganisms in wastewater seems to be directly related to active chlorine and oxygen species electrochemically produced at the surface of the anode material. Complete depletion of COD and TOC can be attained during electrolyses with BDD anode after the consumption of specific electric charges of 4.0 and 8.0 Ah dm⁻³, respectively. Higher specific electric charges (>25 Ah dm⁻³) were consumed to removal completely COD and about 75% of TOC during electrolyses with DSA anodes (IrO₂ and RuO₂). However, the electrolysis using Pt anode can partially remove and even after the consumption of high specific electric charges (>40 Ah dm⁻³) COD and TOC did not exceed 50 and 25%, respectively. Active chlorine species including hypochlorite ions and chloramines formed during electrolysis contribute not only to deactivate microorganisms but also to degrade organics compounds. High conversion yields of organic nitrogen into nitrates and ammonium were achieved during electrolysis BDD and DSA anodes. The results have confirmed that BDD anode is more efficient than with IrO₂, RuO₂ and Pt electrodes in terms of COD and TOC removals. However, higher amounts of perchlorates were measured at the end of the electrolysis using BDD anode.

Reduction in energy for electrochemical disinfection of E. coli in urine simulant

ABSTRACT

We report the development of novel modes of operation for electrochemical disinfection of E. coli in human urine simulant with an aim to minimize the energy required for disinfection. The system employs boron-doped diamond electrodes and will be part of an energy neutral, water and additive free outdoor toilet being developed for use in developing countries. Disinfection had been previously demonstrated with voltage being continuously applied to the electrode until disinfection was achieved. In the present study, a new pulsed mode of operation is investigated. This includes a continuous on mode, where oxidants are generated until disinfection is achieved, a single cycle mode, where oxidants are generated for a fixed time and the water is circulated so allow already generated oxidants to disinfect, and a pulsed mode with different duty cycles, which is like the single cycle mode but with multiple cycles. Disinfection was achieved with pulsed mode operation with a 68% energy reduction compared to the continuous on mode. Energy saving was most likely achieved by lengthening the contact time of the disinfectant with the bacteria and increased generation of non-chlorine disinfecting oxidants.

GRAPHICAL ABSTRACT

Electrochemical disinfection of bacterial contamination: Effectiveness and modeling study of E. coli inactivation by electro-Fenton, electro-peroxi-coagulation and electrocoagulation

The present work undertakes an examination and comparison of electro-Fenton (EF), electro-peroxi-coagulation (EPC) and electrocoagulation (EC) applied to the E. coli inactivation in batch reactor. Indeed, platinum (Pt (anode), EF), stainless steel (SS (cathode), EF, EPC) and ordinary steel (Fe (anode), EPC) and aluminum (Al, EC) were used respectively. The current intensity, nature of electrolytic support, bacterial density and hydrogen peroxide (H₂O₂) concentration are the most influenced study parameters. The obtained results showed that the high current intensities were significant for better inactivation and destruction of E. coli cells and caused a maximum of energy consumption. Both disinfection and energy consumption were improved by adding NaCl (or Na₂SO₄) in the three processes. Higher cellular density limited the electrochemical process and has negative effect in E. coli inactivation and the energy consumption. Only in the EPC case, the disinfection was considerably increased in function with H₂O₂ concentration. The modeling parameters of the inactivation kinetics of E. coli showed a good fitting of the established model (0.9560 < R² < 0.9979, 0.9267 < R² adjusted <0.997 and 0.0189 < RMSE <0.4821), faster kinetics of E. coli inactivation (significant values of K_max and Sl) in the case of high current intensity (0.2442<K_max<0.7440 and 10.50 < Sl < 24.69), the presence of chlorides or sulfates (0.6662<K_max<0.7818 and 11.67 < Sl < 18.59), and the sufficient H₂O₂ concentration (0.4712<K_max<0.9204 and 13.00 < Sl < 16.38). Moreover, the analysis of the results revealed that the EF is more effective in terms of the E. coli inactivation and the energy consumption comparatively to the other studied processes.

Performic Acid Controls Better Clostridium tyrobutyricum Related Bacteria than Peracetic Acid

Clostridia are anaerobic spore-forming bacteria, which degrade carbohydrates to butyric acid, carbon dioxide, hydrogen and other compounds. These bacteria are commonly found in feces of ruminants, from where they can enter to udders and milk via manure or fodder. This study was done to find a sustainable sanitation method to control the resistant clostridial spores as they are difficult to control in the food processing industry. Clostridia spoil cheeses and other dairy products, and thereby increase the carbon footprint of products and cause economical losses in the dairy industry. The efficacy of two organic peroxides; peracetic acid (PAA) and performic acid (PFA) was tested against 30 clostridia strains isolated from cattle slurry, silage, or spoiled cheeses. PAA, at a concentration of 220 mg L−1, only eliminated 6/30 clostridia strains, whereas PFA totally eliminated 26/30 clostridia strains at a concentration of 120 mg L−1. PFA therefore seems to be a more potent disinfectant than the more commonly used PAA. PFA is an effective disinfectant against Clostridium tyrobutyricum and other resistant clostridia at 120 mg L−1 for 5–10 min contact time at room temperature.

Effects of O3/Cl2 disinfection on corrosion and opportunistic pathogens growth in drinking water distribution systems

The effects of O₃/Cl₂ disinfection on corrosion and the growth of opportunistic pathogens in drinking water distribution systems were studied using annular reactors (ARs). The corrosion process and most probable number (MPN) analysis indicated that the higher content of iron-oxidizing bacteria and iron-reducing bacteria in biofilms of the AR treated with O₃/Cl₂ induced higher Fe₃O₄ formation in corrosion scales. These corrosion scales became more stable than the ones that formed in the AR treated with Cl₂ alone. O₃/Cl₂ disinfection inhibited corrosion and iron release efficiently by changing the content of corrosion-related bacteria. Moreover, ozone disinfection inactivated or damaged the opportunistic pathogens due to its strong oxidizing properties. The damaged bacteria resulting from initial ozone treatment were inactivated by the subsequent chlorine disinfection. Compared with the AR treated with Cl₂ alone, the opportunistic pathogens M. avium and L. pneumophila were not detectable in effluents of the AR treated with O₃/Cl₂, and decreased to (4.60±0.14) and (3.09±0.12) log₁₀ (gene copies/g corrosion scales) in biofilms, respectively. The amoeba counts were also lower in the AR treated with O₃/Cl₂. Therefore, O₃/Cl₂ disinfection can effectively control opportunistic pathogens in effluents and biofilms of an AR used as a model for a drinking water distribution system.

Factors influencing the removal of antibiotic-resistant bacteria and antibiotic resistance genes by the electrokinetic treatment

The performance of the electrokinetic remediation process on the removal of antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) was evaluated with different influencing factors. With chlortetracycline (CTC), oxytetracycline (OTC), and tetracycline (TC) as template chemicals, the removal of both ARB and ARGs was enhanced with the increase of voltage gradient (0.4-1.2 V cm^-1) and prolonged reaction time (3-14 d). The greatest removal (26.01-31.48% for ARB, 37.93-83.10% for ARGs) was obtained applying a voltage of 1.2 V cm^-1, leading to the highest electrical consumption. The effect of polarity reversal intervals on the inactivation ratio of ARB followed the order of 0 h (66.06-80.00%) > 12 h (17.07-24.75%) > 24 h (10.44-13.93%). Lower pH, higher current density, and more evenly-distributed voltage drop was observed with a polarity reversal interval of 12 h compared with that of 24 h, leading to more efficient electrochemical reactions in soil. Compared with sul genes, tet genes were more vulnerable to be attacked in an electric field. It was mainly attributed to the lower abundance of tet genes (except tetM) and the varied effects of electrokinetic remediation process on different ARGs. Moreover, a relatively less removal ratio of tetC and tetG was obtained mainly due to the mechanism of the efflux pump upregulation. Both tet and sul genes were positively correlated with TC-resistant bacteria. The efflux pump genes like tetG and the cellular protection genes like tetM showed different correlations with ARB. This study enhances the current understanding on the removal strategies of ARB and ARGs, and it provides important parameters for their destruction by the electrokinetic treatment.

UV-Light-Induced Aggregation of Arsenic and Metal Sulfide Particles in Acidic Wastewater: The Role of Free Radicals

The removal of arsenic and metals by sulfide (S(-II)) from acidic wastewater is an efficient method. However, the small sulfide particles formed in such a process make solid-liquid separation difficult, which greatly hinders its application. This study investigated the aggregation behavior of different sulfide particles (As₂S₃, CuS and CdS) under ultraviolet (UV) irradiation. In the dark, the aggregation rate of the arsenic sulfide (As₂S₃) particles was extremely slow. However, under UV irradiation, the growth of the As₂S₃ particles was significantly enhanced. A possible mechanism of UV-light-induced aggregation of As₂S₃ particles was proposed. The HS· and ·OH radicals formed by a series of photochemical reactions can efficiently attack the S(-II) in the As₂S₃ particle, leading to the formation of an intermediate species, [As₂S₂-S·]⁺. Then, two [As₂S₂-S·]⁺ species combine to form [As₂S₂-S-S-S₂As₂]²⁺. The formation of [As₂S₂-S-S-S₂As₂]²⁺ results in the attenuation of the electronegativity and the rapid aggregation of the sulfide particles. In addition, the small S⁰ particles generated in irradiated As₂S₃ system can efficiently coalesce into As₂S₃ particles. The CuS and CdS particles should have similar aggregation mechanisms. This study proposed a potential method for sulfide particle aggregation and provided a theoretical foundation for the development and application of UV-light-induced sulfide particle aggregation technology.

Efficient Bacterial Inactivation by Transition Metal Catalyzed Auto-Oxidation of Sulfite

Disinfection is an indispensable process in wastewater treatment plants. New bacterial inactivation technologies are of increasing interest and persistent demand. A category of simple and efficient bactericidal systems have been established in this study, that is, the combination of divalent transition metal (Mn(II), Co(II), Fe(II), or Cu(II)) and sulfite. In these systems, metal catalyzed auto-oxidation of sulfite was manifested to generate reactive intermediary SO₄^•- that played the major role in Escherichia coli inactivation at pH 5-8.5. Increasing concentrations of metal ion or sulfite, and lower pH, led to higher bacterial deaths. Bacterial inactivation by Me(II)/sulfite systems was demonstrated to be a surface-bound oxidative damage process through destructing vital cellular components, such as NADH and proteins. Additionally, the developed Me(II)/sulfite systems also potently killed other microbial pathogens, that is, Pseudomonas aeruginosa, Bacillus subtilis, and Cu(II)-antibiotic-resistant E. coli. The efficacy of Me(II)/sulfite in treating real water samples was further tested with two sewages from a wastewater treatment plant and a natural lake water body, and Cu(II)/sulfite and Co(II)/sulfite rapidly inactivated viable bacteria regardless of bacteria species and cell density, therefore holding great promises for wastewater disinfection.

Inactivation, lysis and degradation by-products of Saccharomyces cerevisiae by electrooxidation using DSA

The yeast Saccharomyces cerevisiae, a microorganism with cell walls resistant to many types of treatments, was chosen as a model to study electrochemical disinfection process using dimensionally stable anodes (DSA). DSA electrodes with nominal composition of Ti/RuO₂TiO₂ and Ti/RuO₂TiO₂IrO₂ were evaluated in 0.05 mol L^-1 Na₂SO₄ containing yeast. The results showed inactivation about of 100 % of the microorganisms at Ti/RuO₂TiO₂ by applying 20 and 60 mA cm^-2 after 120 min of electrolysis, while a complete inactivation at Ti/RuO₂IrO₂TiO₂ electrode was achieved after 180 min at 60 mA cm^-2. When chloride ions were added in the electrolyte solution, 100 % of the yeast was inactivated at 20 mA cm^-2 after 120 min of electrolysis, independent of the anode used. In the absence of chloride, the energy consumption (EC) was of 34.80 kWh m^-3, at 20 mA cm^-2 by using Ti/RuO₂TiO₂ anode. Meanwhile, in the presence of chloride, EC was reduced, requiring 30.24 and 30.99 kWh m^-3 at 20 mA cm^-2, for Ti/RuO₂TiO₂ and Ti/RuO₂IrO₂TiO₂ electrodes, respectively, The best performance for cell lysis was obtained in the presence of chloride with EC of 88.80 kWh m^-3 (Ti/RuO₂TiO₂) and 91.85 kWh m^-3 (Ti/RuO₂IrO₂TiO₂) to remove, respectively, 92 and 95 % of density yeast. The results clearly showed that yeast, as a model adopted, was efficiently inactivated and lysed by electrolysis disinfection using DSA-type electrodes.

Comparison of Antibiotic Resistance Removal Efficiencies Using Ozone Disinfection under Different pH and Suspended Solids and Humic Substance Concentrations

This study mainly evaluated the effectiveness of ozonation toward the enhancement of the removal efficiencies of antibiotic-resistant bacteria (ARB), pB10 plasmid transfer, and pB10 plasmids under different pH and suspended solids (SS) and humic acid concentrations. First, chlorination was tested as a reference disinfection process. Chlorination at a very high dose concentration of Cl2 (75 mg L(-1)) and a long contact time (10 min) were required to achieve approximately 90% ARB and pB10 plasmid transfer removal efficiencies. However, even these stringent conditions only resulted in a 78.8% reduction of pB10 plasmid concentrations. In case of ozonation, the estimated CT (concentration × contact time) value (at C0 = 7 mg L(-1)) for achieving 4-log pB10 plasmid removal efficiency was 127.15 mg·min L(-1), which was 1.04- and 1.25-fold higher than those required for ARB (122.73 mg·min L(-1)) and a model nonantibiotic resistant bacterial strain, E. coli K-12, (101.4 mg·min L(-1)), respectively. In preventing pB10 plasmid transfer, ozonation achieved better performance under conditions of higher concentrations of humic acid and lower pH. Our study results demonstrated that the applicability of CT concept in practice, conventionally used for disinfection, might not be appropriate for antibiotic resistance control in the wastewater treatment process. Further studies should be conducted in wastewater engineering on how to implement multiple barriers including disinfection to prevent ARB and ARG discharge into the environment.

Subcellular mechanism of Escherichia coli inactivation during electrochemical disinfection with boron-doped diamond anode: A comparative study of three electrolytes

Although the identification of effective oxidant species has been extensively studied, yet the subcellular mechanism of bacterial inactivation has never been clearly elucidated in electrochemical disinfection processes. In this study, subcellular mechanism of Escherichia coli inactivation during electrochemical disinfection was revealed in terms of comprehensive factors such as cell morphology, total organic components, K(+) leakage, membrane permeability, lipid peroxidation, membrane potential, membrane proteins, intracellular enzyme, cellular ATP level and DNA. The electrolysis was conducted with boron-doped diamond anode in three electrolytes including chloride, sulfate and phosphate. Results demonstrated that cell inactivation was mainly attributed to damage to the intracellular enzymatic systems in chloride solution. In sulfate solution, certain essential membrane proteins like the K(+) ion transport systems were eliminated. Thus, the pronounced K(+) leakage from cytosol resulted in gradual collapse of the membrane potential, which would hinder the subcellular localization of cell division-related proteins as well as ATP synthesis and thereby lead to the bacterial inactivation. Remarkable lipid peroxidation was observed, while the intracellular damage was negligible. In phosphate solution, the cells sequentially underwent overall destruction as a whole cell with no captured intermediate state, during which the organic components of the cells were mostly subjected to mineralization. This study provided a thorough insight into the bacterial inactivation mechanism on the subcellular level.

Synergetic antibacterial activity of reduced graphene oxide and boron doped diamond anode in three dimensional electrochemical oxidation system

A 100% increment of antibacterial ability has been achieved due to significant synergic effects of boron-doped diamond (BDD) anode and reduced graphene oxide (rGO) coupled in a three dimensional electrochemical oxidation system. The rGO, greatly enhanced by BDD driven electric field, demonstrated strong antibacterial ability and even sustained its excellent performance during a reasonable period after complete power cut in the BDD-rGO system. Cell damage experiments and TEM observation confirmed much stronger membrane stress in the BDD-rGO system, due to the faster bacterial migration and charge transfer by the expanded electro field and current-carrying efficiency by quantum tunnel. Reciprocally the hydroxyl-radical production was eminently promoted with expanded area of electrodes and delayed recombination of the electron–hole pairs in presence of the rGO in the system. This implied a huge potential for practical disinfection with integration of the promising rGO and the advanced electrochemical oxidation systems.

Fe5C2 nanoparticles: a reusable bactericidal material with photothermal effects under near-infrared irradiation

Hägg iron carbide (Fe₅C₂) was synthesized through a facile one-pot wet-chemical route and employed as a photothermal agent to inactivate bacterial cells.

Conductive diamond sono-electrochemical disinfection (CDSED) for municipal wastewater reclamation

In the present work, the disinfection of actual effluents from a municipal wastewater treatment plant (WWTP) by a conductive diamond sono-electrochemical process was assessed. First, efficiency of single electrodisinfection process with diamond anodes (without the contribution of ultrasounds) was studied, finding that the total disinfection can be attained at current charges applied below 0.02kAhm(-3). It was also found that the main disinfection mechanism is the attack of Escherichia coli (E. coli) by the disinfectants produced in the electrochemical cell and that the production of chlorates is avoided when working at current densities not higher than 1.27Am(-2). Next, a marked synergistic effect was found when coupling ultrasound (US) irradiation to the electrochemical system (sono-electrochemical disinfection). This increase in the disinfection rate was found to be related to the suppression of the agglomeration of E. coli cells and the enhancement in the production of disinfectant species.

Bactericidal mechanisms of Ag₂O/TNBs under both dark and light conditions

Ag(2)O/TNBs were fabricated by depositing Ag(2)O nanoparticles on the surface of TiO(2) nanobelts (TNBs). The disinfection activities of Ag(2)O/TNBs on two representative bacterial types: Gram-negative Escherichia coli ATCC15597 and Gram-positive Bacillus subtilis, were examined under both dark and visible light conditions. Ag(2)O/TNBs exhibited stronger bactericidal activities than Ag(2)O nanoparticles and TNBs under both dark and light conditions. For both cell types, disinfection effects of Ag(2)O/TNBs were greater under light conditions relative to those under dark conditions. The bactericidal mechanisms of Ag(2)O/TNBs under both dark and light conditions were explored. Ag(+) ions released from Ag(2)O/TNBs did not contribute to the bactericidal activity of Ag(2)O/TNBs under dark conditions, whereas the released Ag(+) ions showed bactericidal activity under visible light irradiation conditions. Active species (H(2)O(2), O(2)(-)·, and e(-)) generated by Ag(2)O/TNBs played important roles in the disinfection processes under both dark and visible light irradiation conditions. Without the presence of active species, the direct contact of Ag(2)O/TNBs with bacterial cells had no bactericidal effect.