Enzyme-free sensing of hydrogen peroxide and glucose at a CuS nanoflowers modified glassy carbon electrode

One-step hydrothermal synthesis of CuS/MoS2 composite for use as an electrochemical non-enzymatic glucose sensor

Early diagnosis may be crucial for the prevention of chronic diabetes mellitus. For that herein, we prepared a CuS/MoS2 composite for a non-enzymatic glucose sensor through a one-step hydrothermal method owing to the synergetic effect of CuS/MoS2. The surface morphology of CuS/MoS2 was studied by Field Emission Scanning Electron Microscopy (FESEM) and Cs-corrected Scanning Transmission Electron Microscopy (Cs-STEM). The crystallinity and surface composition of CuS/MoS2 were analyzed by X-ray Diffraction (XRD) and X-ray Photoelectron Spectroscopy (XPS) respectively. The working electrode was prepared from CuS/MoS2 electrocatalyst, and for that dispersed solution of electrocatalyst was used to fabricate the material-loaded glassy carbon electrode (GC). CuS/MoS2 composite shows the viability of electrocatalyst to oxidize glucose in an alkaline solution with sensitivity and detection limit of 252.71 μA mM-1 cm-2 and 1.52 μM respectively. The proposed glucose sensor showed reasonable stability and potential selectivity during electrochemical analysis. Accordingly, the CuS/MoS2 composite has potential as a viable material for glucose sensing in diluted human serum.

Exploring Copper Oxide and Copper Sulfide for Non-Enzymatic Glucose Sensors: Current Progress and Future Directions

Millions of people worldwide are affected by diabetes, a chronic disease that continuously grows due to abnormal glucose concentration levels present in the blood. Monitoring blood glucose concentrations is therefore an essential diabetes indicator to aid in the management of the disease. Enzymatic electrochemical glucose sensors presently account for the bulk of glucose sensors on the market. However, their disadvantages are that they are expensive and dependent on environmental conditions, hence affecting their performance and sensitivity. To meet the increasing demand, non-enzymatic glucose sensors based on chemically modified electrodes for the direct electrocatalytic oxidation of glucose are a good alternative to the costly enzymatic-based sensors currently on the market, and the research thereof continues to grow. Nanotechnology-based biosensors have been explored for their electronic and mechanical properties, resulting in enhanced biological signaling through the direct oxidation of glucose. Copper oxide and copper sulfide exhibit attractive attributes for sensor applications, due to their non-toxic nature, abundance, and unique properties. Thus, in this review, copper oxide and copper sulfide-based materials are evaluated based on their chemical structure, morphology, and fast electron mobility as suitable electrode materials for non-enzymatic glucose sensors. The review highlights the present challenges of non-enzymatic glucose sensors that have limited their deployment into the market.

Synthesis, Characterization, and Electrochemical Evaluation of Copper Sulfide Nanoparticles and Their Application for Non-Enzymatic Glucose Detection in Blood Samples

Glutathione-capped copper sulfide (CuxSy) nanoparticles with two different average sizes were successfully achieved by using a simple reduction process that involves only changing the reaction temperature. Temperature-induced changes in the size of CuxSy nanoparticles resulted in particles with different optical, morphological, and electrochemical properties. The dependence of electrochemical sensing properties on the sizes of CuxSy nanoparticles was studied by using voltammetric and amperometric techniques. The spherical CuxSy nanoparticles with the average particle size of 25 ± 0.6 nm were found to be highly conductive as compared to CuxSy nanoparticles with the average particle size of 4.5 ± 0.2 nm. The spherical CuxSy nanoparticles exhibited a low bandgap energy (Eg) of 1.87 eV, resulting in superior electrochemical properties and improved electron transfer during glucose detection. The sensor showed a very good electrocatalytic activity toward glucose molecules in the presence of interference species such as uric acid (UA), ascorbic acid (AA), fructose, sodium chloride, and sucrose. These species are often present in low concentrations in the blood. The sensor demonstrated an excellent dynamic linear range between 0.2 to 16 mM, detection limit of 0.2 mM, and sensitivity of 0.013 mA/mM. The applicability of the developed sensor for real field determination of glucose was demonstrated by use of spiked blood samples, which confirmed that the developed sensor had great potential for real analysis of blood glucose levels.

Quasi-aligned Cu2S/Cu(OH)2nanorod arrays anchored on Cu foam as self-supported electrode for non-enzymatic glucose detection

Self-supported Cu₂S/Cu(OH)₂composite nanorods for highly sensitive non-enzymatic glucose sensing werein situgrown on Cu foam by simple hydrothermal treatment of aligned Cu(OH)₂nanorods. The physicochemical and electrochemical properties of the as-fabricated Cu₂S/Cu(OH)₂composite nanorods were characterized by scanning electron microscopy, transmission electron microscopy, x-ray diffraction, Raman spectroscope, x-ray photoelectron spectroscope, cyclic voltammetry, electrochemical impedance spectroscopy, amperometrici-tmeasurements. The mechanism of the composite nanorods produced on conductive substrates was also explored. The electrode exhibits a sensitivity of 9626.88μA mM^-1cm^-2towards glucose with good anti-interference ability, indicating it a promising electrode material for the enhanced non-enzymatic glucose detection.

Copper sulfide nanostructures: synthesis and biological applications

Over the past few years, considerable attention has been paid to biomedical applications of copper sulfide nanostructures owing to their enhanced physiochemical and pharmacokinetics characteristics in comparison to gold, silver, and carbon nanomaterials. The small-sized Cu x S y nanoparticles have the advantage to absorb efficiently in the near-infrared region (NIR) above 700 nm and the absorption can be tuned by altering their stoichiometries. Moreover, their easy removal through the kidneys overpowers the issue of toxicity caused by many inorganic substances. The low cost and selectivity further add to the advantages of Cu x S y nanostructures as electrode materials in comparison to relatively expensive materials such as silver and gold nanoparticles. This review is mainly focused on the synthesis and biomedical applications of Cu x S y nanostructures. The first part summarizes the various synthetic routes used to produce Cu x S y nanostructures with varying morphologies, while the second part targets the recent progress made in the application of small-sized Cu x S y nanostructures as biosensors, and their analysis and uses in the cure of cancer. Photoacoustic imaging and other cancer treatment applications are discussed. Research on Cu x S y nanostructures will continue to increase over the next few decades, and great opportunities lie ahead for potential biomedical applications of Cu x S y nanostructures.

Single-step microwave synthesis of a novel ternary nanocomposite as an efficient luminophore and boron nitride quantum dots as a new coreactant for a cathodic ECL monitoring of chlorpyrifos

In this study, a novel and innovative enzyme-free electrochemiluminescence (ECL) pesticide probe based on a ternary nanocomposite, CuS/CQDs/g-C₃N₄NS, was demonstrated for the accurate monitoring of chlorpyrifos. Boron nitride quantum dots were introduced as a new and effective coreactant in comparison with other coreactants, such as hydrogen peroxide, peroxydisulfate, and tripropylamine, in the negative potential range for the first time. The nanocomposite as a promoted luminophore was synthesized by a one-pot microwave route. Carbon quantum dots and copper sulfide nanostructures were truly incorporated on the porous graphitized carbon nitride, which displayed a good cooperative effect on the signal improvement. CuS as a co-reaction accelerator and CQDs with a superior luminescence effect produced more radical species, and thus, the ECL signal was amplified. Upon increasing the appropriate concentration of this coreactant in electrolyte media, the signal intensity of the nanocomposite increases. A low detection limit of 3.0 × 10^-16 M and a wide range from 2.0 × 10^-15 to 7.0 × 10^-9 M were gained. Also, the fabricated pesticide sensor presented excellent repeatability for 20 consecutive optical signals, with a RSD of about 1.4%. Owing to its high proficiency, the developed sensor was applied as a new probe for chlorpyrifos analysis in water and fruit samples.

Application of CuS/Au Heterostructure with peroxidase-like activity in immunosensors

Early detection of tumour markers is essential for the timely treatment of cancer to realise the sensitive detection of Carcinoembryonic antigen (CEA). We chose electrochemical immunosensor as a simple analytical...

A web of poly(bisbenzimidazolatocopper(ii)) around multiwalled carbon nanotubes for the electrochemical detection of hydrogen peroxide

The present work focuses on the electrochemical determination of hydrogen peroxide (H2O2), using a poly(bisbenzimidazolatocopper(ii)) coordinated multiwalled carbon nanotube modified glassy carbon electrode (MWCNT/(BIM–Cu2+)n@GCE).

Electrochemical Characterization of Modified Glassy Carbon Electrodes for Non-Enzymatic Glucose Sensors

The diversity of materials proposed for non-enzymatic glucose detection and the lack of standardized protocols for assessing sensor performance have caused considerable confusion in the field. Therefore, methods for pre-evaluation of working electrodes, which will enable their conscious design, are currently intensively sought. Our approach involved comprehensive morphologic and structural characterization of copper sulfides as well as drop-casted suspensions based on three different polymers-cationic chitosan, anionic Nafion, and nonionic polyvinylpyrrolidone (PVP). For this purpose, scanning electron microscopy (SEM), X-ray diffraction (XRD), and Raman spectroscopy were applied. Subsequently, comparative studies of electrochemical properties of bare glassy carbon electrode (GCE), polymer- and copper sulfides/polymer-modified GCEs were performed using electrochemical impedance spectroscopy (EIS) and voltammetry. The results from EIS provided an explanation for the enhanced analytical performance of Cu-PVP/GCE over chitosan- and Nafion-based electrodes. Moreover, it was found that the pH of the electrolyte significantly affects the electrocatalytic behavior of copper sulfides, indicating the importance of OH_ads in the detection mechanism. Additionally, diffusion was denoted as a limiting step in the irreversible electrooxidation process that occurs in the proposed system.

Structural Engineering of Hollow Microflower-like CuS@C Hybrids as Versatile Electrochemical Sensing Platform for Highly Sensitive Hydrogen Peroxide and Hydrazine Detection

Designing metal sulfides with unique configurations and exploring their electrochemical activities for hydrogen peroxide (H₂O₂) and hydrazine (N₂H₄) is challenging and desirable for various fields. Herein, hollow microflower-like CuS@C hybrids were successfully assembled and further exploited as a versatile electrochemical sensing platform for H₂O₂ reduction and N₂H₄ oxidation, of which the elaborate strategies make the perfect formation of hollow architecture, providing considerable electrocatalytic sites and fast charge transfer rate, while the appropriate introduction polydopamine-derived carbon skeleton facilitates the electronic conductivity and boosts structural robustness, thus generating wide linear range (0.05-14 and 0.01-10 mM), low detection limit (0.22 μM and 0.07 μM), and a rather low overpotential (-0.15 and -0.05 V) toward H₂O₂ and N₂H₄, as well as good selectivity, excellent reproducibility, and admirable long-term stability. It should be highlighted that the operating potentials can compare favorably with those of some reported H₂O₂ and N₂H₄ sensors based on noble metals. In addition, good recoveries and acceptable relative standard deviations (RSDs) attained in serum and water samples fully verify the accuracy and anti-interference capability of our proposed sensor systems. These results not only elucidate an effective structural nanoengineering strategy for electroanalytical science but also advance the rational utilization of H₂O₂ and N₂H₄ in practicability.

Nonenzymatic Glucose Sensors Based on Copper Sulfides: Effect of Binder-Particles Interactions in Drop-Casted Suspensions on Electrodes Electrochemical Performance

The constant progress in novel nanomaterials synthesis has contributed to the rapid development of nonenzymatic glucose sensors. For working electrodes preparation, drop casting proved to be the most convenient and thus most widely applied method. However, appropriate interpretation of obtained electrochemical signal requires in-depth knowledge of limitations related to this technique. In this study, we prepared solutions based on commonly reported polymers for nanostructures immobilization and investigated their influence on copper sulfides distribution on the electrode. Characterization of suspensions properties and behavior of particles during droplet drying revealed that nonionic polyvinylpyrrolidone (PVP) was favorable for electrodes modification with copper sulfides in comparison with Nafion and chitosan. It ensured homogeneity of the suspension as well as the uniform coverage of the electrode surface with particles, what resulted in increased active surface area and, therefore, higher signal from glucose addition. On the other hand, when cationic chitosan was used as a binder, suspensions were agglomerated and, within dry deposits, a coffee-ring effect was observed. Appropriate adjustment of material and polymer interactions led to enhanced electrode electrochemical performance.

Electrochemical Enzyme-free Sensing of Oxalic Acid Using an Amine-mediated Synthesis of CuS Nanosphere

Copper sulfide nanospheres (CuS NS) were prepared by a solvothermal method with the support of p-phenylene diamine as a structure direct agent. The formation of CuS NS was evaluated using XRD, FE-SEM, HR-TEM, XPS, and electrochemical methods. The CuS NS modified electrode demonstrated excellent electro-catalytic behavior for the electro-oxidation of oxalic acid (OA). The modified electrode showed a good linear range (50 to 700 μM), high sensitivity (0.0353 μA μM^-1 cm^-2), a low detection limit (35.6 μM), long term stability and good anti-interference behavior.

Nickel sulfide-incorporated sulfur-doped graphitic carbon nitride nanohybrid interface for non-enzymatic electrochemical sensing of glucose

A nickel sulfide-incorporated sulfur-doped graphitic carbon nitride (NiS/S-g-C₃N₄) nanohybrid was utilized as an interface material for the non-enzymatic sensing of glucose in an alkaline medium (0.1 M NaOH). The precursors used in the preparation of NiS/S-g-C₃N₄ hybrid were thiourea and nickel nitrate hexahydrate as the sulfur and nickel sources, respectively. The HRTEM results reveal that NiS nanoparticles incorporated on the S-g-C₃N₄ nanosheet surface could enhance the electrocatalytic activity and electrical conductivity. The prepared NiS/S-g-C₃N₄ crystalline nature, surface functionalities, graphitic nature, thermal stability and surface composition were investigated using XRD, FT-IR, Raman spectroscopy, TGA and XPS analyses. The NiS/S-g-C₃N₄ modified electrode was used for the non-enzymatic sensing of glucose at an applied potential of 0.55 V vs. Ag/AgCl with a detection limit of 1.5 μM (S/N = 3), sensitivity of 80 μA mM^-1 cm^-2 and the response time of the fabricated sensor was close to 5 s. Different inorganic ions and organic substances did not interfere during glucose sensing. The NiS/S-g-C₃N₄ nanohybrid material could be extended for a real sample analysis and open the way for diverse opportunities in the electrochemical sensing of glucose.

Modulating physicochemical properties in Gd3+@Yb2O3 nanospheres for efficient electrochemical monitoring of H2O2

Herein, a uniform spherical shaped Gd(III) doped Yb₂O₃ (Gd@Yb₂O₃) nanoparticles (NPs) was successfully synthesized via hydrothermal method for electrochemical detection of H₂O₂. The calcination effect and porosity of the materials well elaborated in the present work. The optical properties, size, morphological, thermal, sensing, surface and crystalline properties of synthesized materials were examined by several techniques. The enhanced electrocatalytic performance of Gd@Yb₂O₃ make the present sensor excellent towards the determination of H₂O₂.The anodic and cathodic peak current increased regularly with addition of H₂O₂ solution. The electrode coating surface was stable even after a number of electrochemical cycles and have high limit of detection (51 nM). Moreover, the present sensor was successfully employed for detection of H₂O₂ in real samples.

Quaternized chitosan-stabilized copper sulfide nanoparticles for cancer therapy

In this study, we report a smart and green strategy to synthesize copper sulfide nanoparticles (CuS-NPs) for clinically translatable cancer treatment. For the first time, the preparation of CuS-NPs was developed by taking advantage of the copper-amine complex as the copper source and sodium sulfide as the sulfide source, in which the quaternized chitosan (QCS) was used as a biotemplate and stabilizing agent. The obtained QCS/CuS-NPs composites (CuS@QCS-NPs) were spherical and stable with an average diameter of 5.6 nm, and showed strong NIR absorbance for photothermal conversion. Moreover, in vitro and in vivo cancer theranostic capability of CuS@QCS-NPs without any biomodification was evaluated. The result reveals that after intratumoral (i.t.) injection of CuS@QCS-NPs with NIR laser irradiation (808 nm, 1.5 W/cm², 5 min), the 4T1 mammary tumor growth could be effectively suppressed comparing with the other control groups, and there was no obvious lethal toxicity to liver function, kidney function, and vital organs. Such QCS-stabilized CuS-NPs may provide an alternative for clinical application of CuS-based photothermal therapy.

Electrochemical Sensing of Hydrogen Peroxide Using Block Copolymer Templated Iron Oxide Nanopatterns

A new enzyme-free sensor based on iron oxide (Fe₃O₄) nanodots fabricated on an indium tin oxide (ITO) substrate via a block copolymer template was developed for highly sensitive and selective detection of hydrogen peroxide (H₂O₂). The self-assembly-based process described here for Fe₃O₄ formation is a simple, cost-effective, and reproducible process. The H₂O₂ response of the fabricated electrodes was linear from 2.5 × 10^-3 to 6.5 mM with a sensitivity of 191.6 μA mM^-1cm^-2 and a detection limit of 1.1 × 10^-3 mM. The electrocatalytic activity of Fe₃O₄ nanodots toward the electroreduction of H₂O₂ was described by cyclic voltammetric and amperometric techniques. The sensor described here has a strong anti-interference ability to a variety of common biological and inorganic substances.

Electrochemical nonenzymatic sensing of glucose using advanced nanomaterials

An overview (with 376 refs.) is given here on the current state of methods for electrochemical sensing of glucose based on the use of advanced nanomaterials. An introduction into the field covers aspects of enzyme based sensing versus nonenzymatic sensing using nanomaterials. The next chapter cover the most commonly used nanomaterials for use in such sensors, with sections on uses of noble metals, transition metals, metal oxides, metal hydroxides, and metal sulfides, on bimetallic nanoparticles and alloys, and on other composites. A further section treats electrodes based on the use of carbon nanomaterials (with subsections on carbon nanotubes, on graphene, graphene oxide and carbon dots, and on other carbonaceous nanomaterials. The mechanisms for electro-catalysis are also discussed, and several Tables are given where the performance of sensors is being compared. Finally, the review addresses merits and limitations (such as the frequent need for working in strongly etching alkaline solutions and the need for diluting samples because sensors often have analytical ranges that are far below the glucose levels found in blood). We also address market/technology gaps in comparison to commercially available enzymatic sensors. Graphical Abstract Schematic representation of electrochemical nonenzymatic glucose sensing on the nanomaterials modified electrodes. At an applied potential, the nanomaterial-modified electrodes exhibit excellent electrocatalytic activity for direct oxidation of glucose oxidation.

Copper sulfide-functionalized molybdenum disulfide nanohybrids as nanoenzyme mimics for electrochemical immunoassay of myoglobin in cardiovascular disease

Myoglobin is one of the most commonly used cardiac biomarkers for the clinical diagnosis of acute myocardial infarction, which is the leading cause of mortality worldwide.

Nanoparticles and DNA - a powerful and growing functional combination in bionanotechnology

Functionally integrating DNA and other nucleic acids with nanoparticles in all their different physicochemical forms has produced a rich variety of composite nanomaterials which, in many cases, display unique or augmented properties due to the synergistic activity of both components. These capabilities, in turn, are attracting greater attention from various research communities in search of new nanoscale tools for diverse applications that include (bio)sensing, labeling, targeted imaging, cellular delivery, diagnostics, therapeutics, theranostics, bioelectronics, and biocomputing to name just a few amongst many others. Here, we review this vibrant and growing research area from the perspective of the materials themselves and their unique capabilities. Inorganic nanocrystals such as quantum dots or those made from gold or other (noble) metals along with metal oxides and carbon allotropes are desired as participants in these hybrid materials since they can provide distinctive optical, physical, magnetic, and electrochemical properties. Beyond this, synthetic polymer-based and proteinaceous or viral nanoparticulate materials are also useful in the same role since they can provide a predefined and biocompatible cargo-carrying and targeting capability. The DNA component typically provides sequence-based addressability for probes along with, more recently, unique architectural properties that directly originate from the burgeoning structural DNA field. Additionally, DNA aptamers can also provide specific recognition capabilities against many diverse non-nucleic acid targets across a range of size scales from ions to full protein and cells. In addition to appending DNA to inorganic or polymeric nanoparticles, purely DNA-based nanoparticles have recently surfaced as an excellent assembly platform and have started finding application in areas like sensing, imaging and immunotherapy. We focus on selected and representative nanoparticle-DNA materials and highlight their myriad applications using examples from the literature. Overall, it is clear that this unique functional combination of nanomaterials has far more to offer than what we have seen to date and as new capabilities for each of these materials are developed, so, too, will new applications emerge.

Cu2O/CuO@rGO heterostructure derived from metal–organic-frameworks as an advanced electrocatalyst for non-enzymatic electrochemical H2O2 sensor

A hybrid heterostructure comprising well-dispersed Cu₂O/CuO particles and reduced graphene oxide (rGO) is synthesized by calcinating a mixture of MOFs-118 and GO in nitrogen atmosphere to improve the sensitivity and selectivity of H₂O₂ sensors.

Evidence of a nanosized copper anodic reaction in an anaerobic sulfide aqueous solution

The present paper reports the use of TEM to investigate the electrochemical behavior of copper subject to the both free corrosion and polarization in sulfide aqueous solution at nano scale.

The effect of A-site doping in a strontium palladium perovskite and its applications for non-enzymatic glucose sensing

The catalytic activity of a strontium palladium perovskite, Sr₂PdO₃, toward non-enzymatic glucose sensing is strongly affected by the Sr²⁺ A-site partial substitution by Ca²⁺ ions; Sr_2−xCa_xPdO₃ with x = 0–0.7.

Copper Sulfide Nanocrystal Level Structure and Electrochemical Functionality towards Sensing Applications

The level structure of copper sulfide nanocrystals of different sizes was investigated by correlating scanning tunneling spectroscopy and cyclic voltammetry data in relation to sensing applications. Upon oxidation of Cu2 S nanocrystals in the low-chalcocite phase, correlated changes are detected by both methods. The cyclic voltammetry oxidation peak of Cu(1+) down shifts, while in-gap states, adjacent to the valence-band edge, appeared in the tunneling spectra. These changes are attributed to Cu vacancy formation leading to a Cu depleted phase of the nanocrystals. The relevance of the oxidation to the use of copper sulfide nanocrystals in hydrogen peroxide sensing was also addressed, showing that upon oxidation the sensitivity vanishes. These findings bare significance to the use of copper sulfide nanocrystals in glucose sensing applications.

High Performance Non-enzymatic Glucose Sensor Based on One-Step Electrodeposited Nickel Sulfide

Nanostructured NiS thin film was prepared by a one-step electrodeposition method and the structural, morphological characteristics of the as-prepared films were analyzed by X-ray diffractometry (XRD), field emission scanning electron microscopy (FESEM) and energy dispersive X-ray analysis (EDAX). The electrocatalytic activity of NiS thin film towards glucose oxidation was investigated by fabricating a non-enzymatic glucose sensor and the sensor performance was studied by cyclic voltammetry (CV) and amperometry. The fabricated sensor showed excellent sensitivity and low detection limit with values of 7.43 μA μM(-1)  cm(-2) and 0.32 μM, respectively, and a response time of <8 s.

Nanoflower-like CoS-decorated 3D porous carbon skeleton derived from rose for a high performance nonenzymatic glucose sensor

A nanoflower-like CoS-decorated 3D porous carbon skeleton from rose has been synthesised and firstly applied in the detection of glucose.

Application of CuS-functionalized ZnO nanoflakes for a paper-based photoelectrochemical immunoassay using an in situ electron donor producing strategy

Copper sulfide functionalized ZnO nanoflakes were used to construct a paper-based photoelectrochemical immunosensor using an in situ electron donor producing strategy.