Carbon dots with multi-functional groups and the application in proton exchange membranes

Low-Volume Reaction Monitoring of Carbon Dot Light Absorbers in Optofluidic Microreactors

Optical monitoring and screening of photocatalytic batch reactions using cuvettes ex situ is time-consuming, requires substantial amounts of samples, and does not allow the analysis of species with low extinction coefficients. Hollow-core photonic crystal fibers (HC-PCFs) provide an innovative approach for in situ reaction detection using ultraviolet-visible absorption spectroscopy, with the potential for high-throughput automation using extremely low sample volumes with high sensitivity for monitoring of the analyte. HC-PCFs use interference effects to guide light at the center of a microfluidic channel and use this to enhance detection sensitivity. They open the possibility of comprehensively studying photocatalysts to extract structure-activity relationships, which is unfeasible with similar reaction volume, time, and sensitivity in cuvettes. Here, we demonstrate the use of HC-PCF microreactors for the screening of the electron transfer properties of carbon dots (CDs), a nanometer-sized material that is emerging as a homogeneous light absorber in photocatalysis. The CD-driven photoreduction reaction of viologens (XV2+) to the corresponding radical monocation XV•+ is monitored in situ as a model reaction, using a sample volume of 1 μL per measurement and with a detectability of <1 μM. A range of different reaction conditions have been systematically studied, including different types of CDs (i.e., amorphous, graphitic, and graphitic nitrogen-doped CDs), surface chemistry, viologens, and electron donors. Furthermore, the excitation irradiance was varied to study its effect on the photoreduction rate. The findings are correlated with the electron transfer properties of CDs based on their electronic structure characterized by soft X-ray absorption spectroscopy. Optofluidic microreactors with real-time optical detection provide unique insight into the reaction dynamics of photocatalytic systems and could form the basis of future automated catalyst screening platforms, where samples are only available on small scales or at a high cost.

Development of High-Performance Polymer Electrolyte Membranes through the Application of Quantum Dot Coatings to Nafion Membranes

Proton exchange membrane water electrolysis (PEMWE) generates oxygen and hydrogen at the anode and cathode, respectively, by conducting protons generated at the anode to the cathode through a proton exchange membrane (PEM). The performance of PEMWE can be improved with faster catalytic reactions at each electrode; thus, the development of a PEM with excellent ionic conductivity and physicochemical stability is essential. Nafion, a type of perfluoro-sulfonic acid polymer, is the most widely used PEM material. However, despite its excellent conductivity and chemical stability, it exhibits high hydrogen permeability due to its structural characteristics. Quantum dots (QDs) have a hydrophilic functional group that can act as an ion conductor and are extremely compatible with the hydrophilic cluster of Nafion due to their characteristic nanosized structure. In this study, various compositions of N-doped carbon quantum dots (CQDs) containing hydrophilic functional groups were coated on a Nafion-212 membrane. The resulting series of CQD-coated Nafion membranes exhibited improvements in morphology and ionic conductivity as well as reductions in hydrogen permeability. In particular, the Nafion membrane coated with 0.75 wt % of N-doped CQD (CQD-cNafion-0.75) exhibited improved mechanical properties and higher oxidation stability compared to Nafion-212. It also displayed higher ionic conductivity of 240.3 mS cm^-1 at 80 °C and reduced hydrogen permeability (about 10% reduction) compared to Nafion-212. In addition, the performance of single-cell PEMWE using the CQD-cNafion-0.75 membrane was found to be approximately 1.2 times higher than Nafion-212.

A State-of-Art on the Development of Nafion-Based Membrane for Performance Improvement in Direct Methanol Fuel Cells

Nafion, a perfluorosulfonic acid proton exchange membrane (PEM), has been widely used in direct methanol fuel cells (DMFCs) to serve as a proton carrier, methanol barrier, and separator for the anode and cathode. A significant drawback of Nafion in DMFC applications is the high anode-to-cathode methanol fuel permeability that results in over 40% fuel waste. Therefore, the development of a new membrane with lower permeability while retaining the high proton conductivity and other inherent properties of Nafion is greatly desired. In light of these considerations, this paper discusses the research findings on developing Nafion-based membranes for DMFC. Several aspects of the DMFC membrane are also presented, including functional requirements, transport mechanisms, and preparation strategies. More importantly, the effect of the various modification approaches on the performance of the Nafion membrane is highlighted. These include the incorporation of inorganic fillers, carbon nanomaterials, ionic liquids, polymers, or other techniques. The feasibility of these membranes for DMFC applications is discussed critically in terms of transport phenomena-related characteristics such as proton conductivity and methanol permeability. Moreover, the current challenges and future prospects of Nafion-based membranes for DMFC are presented. This paper will serve as a resource for the DMFC research community, with the goal of improving the cost-effectiveness and performance of DMFC membranes.

Acidic Groups Functionalized Carbon Dots Capping Channels of a Proton Conductive Metal-Organic Framework by Coordination Bonds to Improve the Water-Retention Capacity and Boost Proton Conduction

Crystalline porous materials, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), have been demonstrated to be versatile material platforms for the development of solid proton conductors. However, most crystalline porous proton conductors suffer from decreasing proton conductivity with increasing temperature due to releasing water molecules, and this disadvantage severely restricts their practical application in electrochemical devices. In this work, for the first time, hydrophilic carbon dots (CDs) were utilized to hybridize with high proton conductivity MOF-802, which is a model of MOF proton conductors, aiming to improve its water-retention capacity and thus enhance proton conduction. The resultant CDs@MOF-802 exhibits impregnable proton conduction with increasing temperature, and the proton conductivity reaches 10^-1 S cm^-1, much superior to that of MOF-802, making CDs@MOF-802 one of the most efficient MOF proton conductors reported so far. This study provides a new strategy to improve the water-retention capacity of porous proton conductors and further realize excellent proton conduction.

Modifying Ionic Membranes with Carbon Dots Enables Direct Production of High-Purity Hydrogen through Water Electrolysis

Traditional electrolysis of water produces hydrogen with a purity of ∼98%. Using ion transport membranes to prevent the migration of oxygen (O₂) from the anode to the cathode, the purity of H₂ can be increased to ∼99.8%, but it still cannot fulfill the requirement for use in fuel cells (>99.97%). Here, we report that modifying a commercial ionic membrane (Nafion) with carbon dots (CDs) can further inhibit O₂ permeation across the membrane, while effectively improving its ion transportability. The key to achieve these effects is the rational design and proper loading of the CDs, which narrows the pore size of the membrane from ∼4 nm to <2 nm and alters its surface functionality. Using the CDs-modified Nafion membrane in an H-type electrolysis cell, we demonstrate that H₂ with a purity of up to 99.98%, which meets the standards of hydrogen fuel cells, can be directly produced without any additional purification process. Our study provides a new route for the low-cost electrolysis of water to produce high-purity hydrogen.

Novel Carbon Dots Derived from Puerariae lobatae Radix and Their Anti-Gout Effects

Gout is a disease with a high incidence and causing great harm, and the current treatment drugs are not satisfactory. In this study, novel water-soluble carbon dots (CDs) with anti-gout effect, named Puerariae lobatae Radix CDs (PLR-CDs), are reported. PLR-CDs were synthesized with an improved pyrolysis method at 300 °C, and their characterization was performed with multifaceted approaches, such as transmission electron microscopy (TEM) and ultraviolet-visible (UV-vis) and Fourier-transform infrared (FTIR) spectroscopy. In addition, the biocompatibility of PLR-CDs was studied using the cell counting kit (CCK)-8 in LO2 cells and RAW264.7 cells, and the anti-gout activity of PLR-CDs was examined on animal models of hyperuricemia and gouty arthritis. The characterization of PLR-CDs indicated that they were nearly spherical, with diameters ranging from 3.0 to 10.0 nm, and the lattice spacing was 0.283 nm. The toxicity experiment revealed that PLR-CDs were non-poisonous for LO2 cells and RAW264.7 cells at concentrations below 250 μg/mL. The results of pharmacodynamic experiments showed that PLR-CDs could lower the blood uric acid level in model rats by inhibiting the activity of xanthine oxidase and reduce the degree of swelling and pathological damage of gouty arthritis. Thus, PLR-CDs with anti-gout biological activity and good biocompatibility have the prospect of clinical application for the treatment of gout.

Effect of carbon dots with chitosan coating on microorganisms and storage quality of modified-atmosphere-packaged fresh-cut cucumber

BACKGROUND

In order to inhibit microorganisms and improve storage quality of fresh-cut cucumber, fresh-cut cucumber was treated by carbon dots (CDs) from kelp/chitosan (CH) coating solution with CD concentrations of 0%, 1.5%, 3% and 4.5% and then packaged as well as stored at 4 °C for 15 days. The effect of CDs/CH coating on microorganisms and the quality of modified-atmosphere-packaged fresh-cut cucumber during storage were investigated.

RESULTS

The CDs was monodispersed spherical morphology with size distribution of 0.54-0.83 nm. Interaction of CDs and CH had the generation of strong hydrogen bond. Inhibition zone diameters of CDs/CH coating against Staphylococcus aureus and Escherichia coli were enhanced with the increase of CD concentrations. Moreover, CDs/CH coating inhibited the growth of total number of colonies, mold, and yeast in modified-atmosphere-packaged fresh-cut cucumber during storage. A coating of 4.5% CDs/CH effectively reduced the losses of weight, firmness, and total soluble solids, the degradation of ascorbic acid content and flavor, and inhibited peroxidases activity, as well as decreased water mobility in fresh-cut cucumber during storage.

CONCLUSION

The results indicated that a CDs/CH coating was helpful for inhibiting microorganisms and improving storage quality, and could be an effective method to prolong shelf life of fresh-cut cucumber. © 2019 Society of Chemical Industry.

Carbon Nanocomposite Membrane Electrolytes for Direct Methanol Fuel Cells-A Concise Review

A membrane electrolyte that restricts the methanol cross-over while retaining proton conductivity is essential for better electrochemical selectivity in direct methanol fuel cells (DMFCs). Extensive research carried out to explore numerous blends and composites for application as polymer electrolyte membranes (PEMs) revealed promising electrochemical selectivity in DMFCs of carbon nanomaterial-based polymer composites. The present review covers important literature on different carbon nanomaterial-based PEMs reported during the last decade. The review emphasises the proton conductivity and methanol permeability of nanocomposite membranes with carbon nanotubes, graphene oxide and fullerene as additives, assessing critically the impact of each type of filler on those properties.

Enhanced removal and detection of benzo[a]pyrene in environmental water samples using carbon dots-modified magnetic nanocomposites

Magnetic nanoparticles (MNPs) have already proven their efficacy in the disposal of a wide array of environmental contaminants in recent years. However, the difficulties in dispersibility and agglomeration of MNPs arising from its own physical and chemical properties limit its large-scale application. Herein, we fabricated the carbon dots/fatty acid-coated MNPs (CDs/C₁₁-Fe₃O₄) through a facile and simple method. To utilize the advantage of carbon dots, these limitations can be mitigated by diminishing the size of MNPs and modifying the surface of MNPs. Detailed characterization including VSM, FT-IR, XPS and TEM conformed that the higher adsorption capacity of CDs/C₁₁-Fe₃O₄ is mainly attributed to low average size (<8 nm), which is obviously lower than that of C₁₁-Fe₃O₄ (about 13 nm). The CDs/C₁₁-Fe₃O₄ showed higher adsorption performance than that of C₁₁-Fe₃O₄ nanocomposites (76.23 ng mg^-1 for CDs/C₁₁-Fe₃O₄ and 59.89 ng mg^-1 for C₁₁-Fe₃O₄). The adsorption processes of BaP on both C₁₁-Fe₃O₄ and CDs/C₁₁-Fe₃O₄ nanocomposites are exothermic, and well simulated by pseudo-second-order model. Moreover, the CDs/C₁₁-Fe₃O₄ were also applied for the detection of BaP in large-volume water samples, which satisfies the China environmental protection standard, are promising candidates for water remediation.