Influence of TiO2 nano-particles on charge carrier transport and cell performance of PMMA-LiClO4 based nano-composite electrolytes

Surface Coordination of Garnet Fillers Improves the Organic-Inorganic Interfacial Compatibility of Composite Solid Electrolyte

Composite solid electrolytes (CSEs) have become one of the most promising solid-state electrolytes due to their favorable safety and flexibility. However, the weak interaction between inorganic fillers and polymer matrix leads to poor organic-inorganic interfacial compatibility, which degrades the electrochemical performance of CSEs. Herein, it is demonstrated that Li6.4La3Zr1.4Ta0.6O12 (LLZTO) can be chemically bonded to the polymer matrix by surface coordination of the 1,2-dithiolane group of lipoic acid (LA) with metal atoms on the surface of LLZTO through a combination of experimental investigations and theoretical calculations. The surface coordination not only enhances the interfacial compatibility between LLZTO and the polymer matrix, but also facilitates rapid Li+ transport, which leads to the ionic conductivity of the prepared CSE (P-V-M@LLZTO) as high as 6.1 × 10-4 S cm-1 at 30 °C. The excellent interface compatibility ensures a stable cycle of Li/P-V-M@LLZTO/Li symmetrical cell for more than 3500 h. As a result, LiFePO4/P-V-M@LLZTO/Li cell delivers the discharge capacity of 161 mAh g-1 after 5 cycles with a capacity retention of 81% after 500 cycles at 0.5C under 30 °C. This work demonstrates that surface coordination is an effective strategy to solve the inherent interfacial incompatibility problem in CSEs.

Research Progress on Solid-State Electrolytes in Solid-State Lithium Batteries: Classification, Ionic Conductive Mechanism, Interfacial Challenges

Solid-state lithium batteries exhibit high-energy density and exceptional safety performance, thereby enabling an extended driving range for electric vehicles in the future. Solid-state electrolytes (SSEs) are the key materials in solid-state batteries that guarantee the safety performance of the battery. This review assesses the research progress on solid-state electrolytes, including polymers, inorganic compounds (oxides, sulfides, halides), and organic-inorganic composites, the challenges related to solid-state batteries in terms of their interfaces, and the status of industrialization research on solid-state electrolytes. For each kind of solid-state electrolytes, details on the preparation, properties, composition, ionic conductivity, ionic migration mechanism, and structure-activity relationship, are collected. For the challenges faced by solid-state batteries, the high interfacial resistance, the side reactions between solid-state electrolytes and electrodes, and interface instability, are mainly discussed. The current industrialization research status of various solid electrolytes is analyzed in regard to relevant enterprises from different countries. Finally, the potential development directions and prospects of high-energy density solid-state batteries are discussed. This review provides a comprehensive reference for SSE researchers and paves the way for innovative advancements in regard to solid-state lithium batteries.

High-Stability Composite Solid Polymer Electrolyte Composed of PAEPU/PP Nonwoven Fabric for Lithium-Ion Batteries

Solid polymer electrolytes have attracted considerable attention, owing to their flexibility and safety. At present, poly(ethylene oxide) is the most widely studied polymer electrolyte matrix. It exhibits higher safety than the polyolefin diaphragm used in traditional lithium-ion batteries. However, it readily crystallizes at room temperature, resulting in low ionic conductivity, and the preparation process involves organic solvents. In this study, from the perspective of molecular design, solvent-free polyaspartate polyurea (PAEPU) and the cheap and easily available polypropylene (PP) nonwoven fabric were used as support materials for the PAEPU/PP composite solid polymer electrolyte (PAEPU/PP m -CPE). This CPE has good thermal stability, dimensional stability, flexibility, and mechanical properties. Among the different CPEs that were analyzed, PAEPU/PP10-CPE@20 had the highest ionic conductivity, which was reinforced with 10 g/m2 PP nonwoven fabric and the content of lithium salt was 20 wt %. Furthermore, PAEPU/PP10-CPE@20 exhibited the highest electrochemical stability with an electrochemical window value of 5.53 V. Moreover, the capacity retention rate of the Li//PAEPU/PP10-CPE@20//LiFePO4 half-cell was 96.82% after 150 cycles at 0.05 C and 60 °C, and the capacity recovery rate in the rate test reached 98.81%.

PDOL-Based Solid Electrolyte Toward Practical Application: Opportunities and Challenges

Polymer solid-state lithium batteries (SSLB) are regarded as a promising energy storage technology to meet growing demand due to their high energy density and safety. Ion conductivity, interface stability and battery assembly process are still the main challenges to hurdle the commercialization of SSLB. As the main component of SSLB, poly(1,3-dioxolane) (PDOL)-based solid polymer electrolytes polymerized in-situ are becoming a promising candidate solid electrolyte, for their high ion conductivity at room temperature, good battery electrochemical performances, and simple assembly process. This review analyzes opportunities and challenges of PDOL electrolytes toward practical application for polymer SSLB. The focuses include exploring the polymerization mechanism of DOL, the performance of PDOL composite electrolytes, and the application of PDOL. Furthermore, we provide a perspective on future research directions that need to be emphasized for commercialization of PDOL-based electrolytes in SSLB. The exploration of these schemes facilitates a comprehensive and profound understanding of PDOL-based polymer electrolyte and provides new research ideas to boost them toward practical application in solid-state batteries.

Tailoring Practically Accessible Polymer/Inorganic Composite Electrolytes for All-Solid-State Lithium Metal Batteries: A Review

Highlights

The current issues and recent advances in polymer/inorganic composite electrolytes are reviewed. The molecular interaction between different components in the composite environment is highlighted for designing high-performance polymer/inorganic composite electrolytes. Inorganic filler properties that affect polymer/inorganic composite electrolyte performance are pointed out. Future research directions for polymer/inorganic composite electrolytes compatible with high-voltage lithium metal batteries are outlined.

Abstract

Solid-state electrolytes (SSEs) are widely considered the essential components for upcoming rechargeable lithium-ion batteries owing to the potential for great safety and energy density. Among them, polymer solid-state electrolytes (PSEs) are competitive candidates for replacing commercial liquid electrolytes due to their flexibility, shape versatility and easy machinability. Despite the rapid development of PSEs, their practical application still faces obstacles including poor ionic conductivity, narrow electrochemical stable window and inferior mechanical strength. Polymer/inorganic composite electrolytes (PIEs) formed by adding ceramic fillers in PSEs merge the benefits of PSEs and inorganic solid-state electrolytes (ISEs), exhibiting appreciable comprehensive properties due to the abundant interfaces with unique characteristics. Some PIEs are highly compatible with high-voltage cathode and lithium metal anode, which offer desirable access to obtaining lithium metal batteries with high energy density. This review elucidates the current issues and recent advances in PIEs. The performance of PIEs was remarkably influenced by the characteristics of the fillers including type, content, morphology, arrangement and surface groups. We focus on the molecular interaction between different components in the composite environment for designing high-performance PIEs. Finally, the obstacles and opportunities for creating high-performance PIEs are outlined. This review aims to provide some theoretical guidance and direction for the development of PIEs.

Recent Advances in Polymers for Potassium Ion Batteries

Potassium-ion batteries (KIBs) are considered to be an effective alternative to lithium-ion batteries (LIBs) due to their abundant resources, low cost, and similar electrochemical properties of K+ to Li+, and they have a good application prospect in the field of large-scale energy storage batteries. Polymer materials play a very important role in the battery field, such as polymer electrode materials, polymer binders, and polymer electrolytes. Here in this review, we focus on the research progress of polymers in KIBs and systematically summarize the research status and achievements of polymer electrode materials, electrolytes, and binders in potassium ion batteries in recent years. Finally, based on the latest representative research of polymers in KIBs, some suggestions and prospects are put forward, which provide possible directions for future research.

The Impact of Polymer Electrolyte Properties on Lithium-Ion Batteries

In recent decades, the enhancement of the properties of electrolytes and electrodes resulted in the development of efficient electrochemical energy storage devices. We herein reported the impact of the different polymer electrolytes in terms of physicochemical, thermal, electrical, and mechanical properties of lithium-ion batteries (LIBs). Since LIBs use many groups of electrolytes, such as liquid electrolytes, quasi-solid electrolytes, and solid electrolytes, the efficiency of the full device relies on the type of electrolyte used. A good electrolyte is the one that, when used in Li-ion batteries, exhibits high Li+ diffusion between electrodes, the lowest resistance during cycling at the interfaces, a high capacity of retention, a very good cycle-life, high thermal stability, high specific capacitance, and high energy density. The impact of various polymer electrolytes and their components has been reported in this work, which helps to understand their effect on battery performance. Although, single-electrolyte material cannot be sufficient to fulfill the requirements of a good LIB. This review is aimed to lead toward an appropriate choice of polymer electrolyte for LIBs.

Stabilization of lithium anode with ceramic-rich interlayer for all solid-state batteries

The deposition of thin layers of polymer/ceramic on a lithium surface to produce a strong barrier against dendrites was demonstrated. Different forms (needle, sphere, rod) and types of ceramic (Al₂O₃, Mg₂B₂O₅) were tested and polymer/ceramic interlayers of a few micrometers (4 μm minimum) between the lithium and the PEO-based solid polymer electrolyte (SPE) were deposited. Interlayers with high amounts of ceramic up to 85 wt% were successfully coated on the surface of lithium foil. Compact “polymer in ceramic” layers were observed when Al₂O₃ spheres were used for instance, providing a strong barrier against the progression of dendrites as well as a buffer layer to alleviate the lithium deformation during stripping/plating cycles. The electrochemical performance of the lithium anodes was assessed in symmetrical Li/SPE/Li cells and in full all-solid-state LiFePO₄ (LFP)/SPE/Li batteries. It was observed for all the cells that the charge transfer resistance was significantly reduced after the deposition of the polymer/ceramic layers on the lithium surface. In addition, the symmetrical cells were able to cycle at higher C-rates and the durability at C/4 was even improved by a factor of 8. Microscopic observations of Li/SPE/Li stacks after cycling revealed that the polymer/ceramic interlayer reduces the deformation of lithium upon cycling and avoids the formation of dendrites. Finally, LFP/SPE/Li batteries were cycled and better coulombic efficiencies as well as capacity retentions were obtained with the modified lithium electrodes. This work is patent-pending (WO2021/159209A1).

Significant electrochemical performance improvement of symmetric Li/Li polymer cells at C/4 by using ceramic-rich coated lithium anodes.

Polymer Electrolytes for Lithium-Ion Batteries Studied by NMR Techniques

This review is devoted to different types of novel polymer electrolytes for lithium power sources developed during the last decade. In the first part, the compositions and conductivity of various polymer electrolytes are considered. The second part contains NMR applications to the ion transport mechanism. Polymer electrolytes prevail over liquid electrolytes because of their exploitation safety and wider working temperature ranges. The gel electrolytes are mainly attractive. The systems based on polyethylene oxide, poly(vinylidene fluoride-co-hexafluoropropylene), poly(ethylene glycol) diacrylate, etc., modified by nanoparticle (TiO₂, SiO₂, etc.) additives and ionic liquids are considered in detail. NMR techniques such as high-resolution NMR, solid-state NMR, magic angle spinning (MAS) NMR, NMR relaxation, and pulsed-field gradient NMR applications are discussed. ¹H, ⁷Li, and ¹⁹F NMR methods applied to polymer electrolytes are considered. Primary attention is given to the revelation of the ion transport mechanism. A nanochannel structure, compositions of ion complexes, and mobilities of cations and anions studied by NMR, quantum-chemical, and ionic conductivity methods are discussed.

A high-performance solid electrolyte assisted with hybrid biomaterials for lithium metal batteries

The demand for high safety lithium batteries has led to the rapid development of solid electrolytes. However, some inherent limitations of solid polymer electrolytes (SPEs) impede them achieving commercial value. In this work, a novel polyethylene oxide (PEO)-based solid electrolyte is reported. For the first time, biomaterial-based chitosan-silica (CS) hybrid particles serve as fillers, which can interact with polymer matrix to significantly improve the electrochemical performance. The optimized polymer electrolyte exhibits a maximum ion conductivity of 1.91 × 10^-4 S·cm^-1 at 30 °C when the mass ratio of PEO and CS is 4:1 (PCS4). All-solid-state LiFePO₄|PCS4|Li cells deliver a high coulombic efficiency and stable cycling performance, remaining an excellent capacity of more than 96.2 % after 150 cycles. Furthermore, the wide electrochemical window (5.4 V) and steady interfacial stability provide the possibility for high-voltage batteries applications. NCM811|| Li cells are assembled and display reliable charge and discharge cycle properties.

PEO-LITFSI-SiO2-SN System Promotes the Application of Polymer Electrolytes in All-Solid-State Lithium-ion Batteries

All-solid-state polymer lithium-ion batteries are ideal choice for the next generation of rechargeable lithium-ion batteries due to their high energy, safety and flexibility. Among all polymer electrolytes, PEO-based polymer electrolytes have attracted extensive attention because they can dissolve various lithium salts. However, the ionic conductivity of pure PEO-based polymer electrolytes is limited due to high crystallinity and poor segment motion. An inorganic filler SiO₂ nanospheres and a plasticizer Succinonitrile (SN) are introduced into the PEO matrix to improve the crystallization of PEO, promote the formation of amorphous region, and thus improve the movement of PEO chain segment. Herein, a PEO₁₈-LiTFSI-5 %SiO₂-5 %SN composite solid polymer electrolyte (CSPE) was prepared by solution-casting. The high ionic conductivity of the electrolyte was demonstrated at 60 °C up to 3.3×10^-4 S cm^-1. Meanwhile, the electrochemical performance of LiFePO₄/CSPE/Li all-solid-state battery was tested, with discharge capacity of 157.5 mAh g^-1 at 0.5 C, and capacity retention rate of 99 % after 100 cycles at 60 °C. This system provides a feasible strategy for the development of efficient all-solid-state lithium-ion batteries.

Composition Modulation and Structure Design of Inorganic-in-Polymer Composite Solid Electrolytes for Advanced Lithium Batteries

Owing to their safety, high energy density, and long cycling life, all-solid-state lithium batteries (ASSLBs) have been identified as promising systems to power portable electronic devices and electric vehicles. Developing high-performance solid-state electrolytes is vital for the successful commercialization of ASSLBs. In particular, polymer-based composite solid electrolytes (PCSEs), derived from the incorporation of inorganic fillers into polymer solid electrolytes, have emerged as one of the most promising electrolyte candidates for ASSLBs because they can synergistically integrate many merits from their components. The development of PCSEs is summarized. Their major components, including typical polymer matrices and diverse inorganic fillers, are reviewed in detail. The effects of fillers on their ionic conductivity, mechanical strength, thermal/interfacial stability and possible Li⁺ -conductive mechanisms are discussed. Recent progress in a number of rationally constructed PCSEs by compositional and structural modulation based on different design concepts is introduced. Successful applications of PCSEs in various lithium-battery systems including lithium-sulfur and lithium-gas batteries are evaluated. Finally, the challenges and future perspectives for developing high-performance PCSEs are proposed.

Review on Polymer-Based Composite Electrolytes for Lithium Batteries

Lithium-ion batteries have dominated the high performance and mobile market for last decade. Despite their dominance in many areas, the development of current commercial lithium-ion batteries is experiencing bottlenecks, limited by safety risks such as: leakage, burning, and even explosions due to the low-boiling point organic liquid electrolytes. Solid electrolyte is a promising option to solve or mitigate those issues. Among all solid electrolytes, polymer based solid electrolytes have the advantages of low flammability, good flexibility, excellent thermal stability, and high safety. Numerous researchers have focused on implementing solid polymer based Li-ion batteries with high performance. Nevertheless, low Li-ion conductivity and poor mechanical properties are still the main challenges in its commercial development. In order to tackle the issues and improve the overall performance, composites with external particles are widely investigated to form a polymer-based composite electrolyte. In light of their work, this review discusses the progress of polymer-based composite lithium ion's solid electrolytes. In particular, the structures, ionic conductivities, electrochemical/chemical stabilities, and fabrications of solid polymer electrolytes are introduced in the text and summarized at the end. On the basis of previous work, the perspectives of solid polymer electrolytes are provided especially toward the future of lithium ion batteries.

Interfaces Between Cathode and Electrolyte in Solid State Lithium Batteries: Challenges and Perspectives

Solid state lithium batteries are widely accepted as promising candidates for next generation of various energy storage devices with the probability to realize improved energy density and superior safety performances. However, the interface between electrode and solid electrolyte remain a key issue that hinders practical development of solid state lithium batteries. In this review, we specifically focus on the interface between solid electrolytes and prevailing cathodes. The basic principles of interface layer formation are summarized and three kinds of interface layers can be categorized. For typical solid state lithium batteries, a most common and daunting challenge is to achieve and sustain intimate solid-solid contact. Meanwhile, different specific issues occur on various types of solid electrolytes, depending on the intrinsic properties of adjacent solid components. Our discussion mostly involves following electrolytes, including solid polymer electrolyte, inorganic solid oxide and sulfide electrolytes as well as composite electrolytes. The effective strategies to overcome the interface instabilities are also summarized. In order to clarify interfacial behaviors fundamentally, advanced characterization techniques with time, and atomic-scale resolution are required to gain more insights from different perspectives. And recent progresses achieved from advanced characterization are also reviewed here. We highlight that the cooperative characterization of diverse advanced characterization techniques is necessary to gain the final clarification of interface behavior, and stress that the combination of diverse interfacial modification strategies is required to build up decent cathode-electrolyte interface for superior solid state lithium batteries.