CuCo2S4/reduced graphene oxide nanocomposites synthesized by one-step solvothermal method as anode materials for sodium ion batteries

Revealing the fast reaction kinetics and interfacial behaviors of CuFeS2 hollow nanorods for durable and high-rate sodium storage

The synergistic effect of two metallic elements in metal sulfides is regarded as a promising route for constructing advanced anodes for sodium-ion batteries (SIBs). However, the explorations of intricate interactions and structural evolution in host material are often overlooked, which are crucial for the performance optimization. Herein, a bimetallic sulfide CuFeS2 and FeS2/CuS heterostructure with similar hollow nanorods morphology is obtained by regulating sulfuration conditions. Compared to the FeS2/CuS heterostructure, the interaction between CuSFe in CuFeS2 weakens the strength of iron-sulfur bonds, thereby facilitating the kinetics of the sodiation reaction and enabling fast-charging capability. Moreover, the higher adsorption of NaF enables CuFeS2 to form a thinner solid electrolyte interface film with richer content of inorganic components. Coupled with the presence of stable intermediate phase, CuFeS2 delivers the excellent electrochemical performances, including a high capacity of 611 mAh/g after 200 cycles at 1 A/g, and 408 mAh/g after 1000 cycles at 30 A/g. Furthermore, CuFeS2 also demonstrates a remarkable capacity retention of 88 % after 200 cycles at 1 A/g in full-cells. This work highlights the potential of CuFeS2 in SIBs while elucidating the underlying factors contributing to the exceptional performance of bimetallic sulfides.

Ti3C2 MXene/MoS2@AuNPs ternary nanocomposite for highly sensitive electrochemical detection of phoxim residues in fruits

Phoxim, extensively utilized in agriculture as an organothiophosphate insecticide, has the potential to cause neurotoxicity and pose human health hazards. In this study, an electrochemical enzyme biosensor based on Ti3C2 MXene/MoS2@AuNPs/AChE was constructed for the sensitive detection of phoxim. The two-dimensional multilayer structure of Ti3C2 MXene provides a robust framework for MoS2, leading to an expansion of the specific surface area and effectively preventing re-stacking of Ti3C2 MXene. Additionally, the synergistic effect of self-reduced grown AuNPs with MoS2 further improves the electrical conductivity of the composites, while the robust framework provides a favorable microenvironment for immobilization of enzyme molecules. Ti3C2 MXene/MoS2@AuNPs electrochemical enzyme sensor showed a significant response to phoxim in the range of 1 × 10-13 M to 1 × 10-7 M with a detection limit of 5.29 × 10-15 M. Moreover, the sensor demonstrated excellent repeatability, reproducibility, and stability, thereby showing its promising potential for real sample detection.

High-performance anode electrocatalyst of MnCo2S4-Co4S3/bamboo charcoal for stimulating power generation in microbial fuel cell

Microbial fuel cell (MFC) is a promising technology for recovering energy in wastewater through bacterial metabolism. However, it always suffers from low power density and electron transfer efficiency, restricting the application. This study fabricated the MnCo2S4-Co4S3/bamboo charcoal (MCS-CS/BC) through an easy one-step hydrothermal method, and the material was applied to carbon felt (CF) to form high-performance MFC anode. MCS-CS/BC-CF anode exhibited lower Rct (10.1 Ω) than BC-CF (17.24 Ω) and CF anode (116.1 Ω), exhibiting higher electrochemical activity. MCS-CS/BC-CF anode promoted the electron transfer rate and resulted in enhanced power density, which was 9.27 times higher (980 mW m-2) than the bare CF (105.7 mW m-2). MCS-CS/BC-CF anode showed the best biocompatibility which attracted distinctly larger biomass (146.27 mg/μL) than CF (20 mg/μL) and BC-CF anode (20.1 mg/μL). The typical exoelectrogens (Geobacter and etc.) took dramatically higher proportion on MCS-CS/BC-CF anode (59.78%) than CF (2.99%) and BC-CF anode (26.67%). In addition, MCS-CS/BC stimulated the synergistic effect between exoelectrogens and fermentative bacteria, greatly favouring the extracellular electron transfer rate between bacteria and the anode and the power output. This study presented an efficient way of high-performance anode electrocatalyst fabrication for stimulating MFC power generation, giving suggestions for high-efficient energy recovery from wastewater.

Introducing CuCo2S4 Nanoparticles on Reduced Graphene Oxide for High-Performance Supercapacitor

In this work, a bimetallic sulfide-coupled graphene hybrid was designed and constructed for capacitive energy storage. The hybrid structure involved decorating copper-cobalt-sulfide (CuCo2S4) nanoparticles onto graphene layers, with the nanoparticles anchored within the graphene layers, forming a hybrid energy storage system. In this hybrid structure, rGO can work as the substrate and current collector to support the uniform distribution of the nanoparticles and provides efficient transportation of electrons into and out of the electrode. In the meantime, CuCo2S4-active materials are expected to offer an evident enhancement in electrochemical activities, due to the rich valence change provided by Cu and Co. Benefiting from the integrated structure of CuCo2S4 nanoparticles and highly conductive graphene substrates, the prepared CuCo2S4@rGO electrode exhibited a favorable capacitive performance in 1 M KOH. At 1 A g-1, CuCo2S4@rGO achieved a specific capacitance of 410 F g-1. The capacitance retention at 8 A g-1 was 70% of that observed at 1 A g-1, affirming the material's excellent rate capability. At the current density of 5 A g-1, the electrode underwent 10,000 charge-discharge cycles, retaining 98% of its initial capacity, which indicates minimal capacity decay and showcasing excellent cycling performance.

Binary Metallic CuCo5 S8 Anode for High Volumetric Sodium-Ion Storage

With the rapid improvement of compact smart devices, fabricating anode materials with high volumetric capacity has gained substantial interest for future sodium-ion batteries (SIBs) applications. Herein, a novel bimetal sulfide CuCo5 S8 material is proposed with enhanced volumetric capacity due to the intrinsic metallic electronic conductivity of the material and multi-electron transfer during electrochemical procedures. Due to the intrinsic metallic behavior, the conducting additive (CA) could be removed from the electrode fabrication without scarifying the high rate capability. The CA-free CuCo5 S8 electrode can achieve a high volumetric capacity of 1436.4 mA h cm-3 at a current density of 0.2 A g-1 and 100 % capacity retention over 2000 cycles in SIBs, outperforming most metal chalcogenides, owing to the enhanced electrode density. Reversible conversion reactions are revealed by combined measurements for sodium systems. The proposed new strategy offers a viable approach for developing innovative anode materials with high-volumetric capacity.

Preparation of Cu7.2S4@N, S co-doped carbon honeycomb-like composite structure for high-rate and high-stability sodium-ion storage

Sodium ion batteries (SIBs) attract most of the attention as alterative secondary battery systems for future large-scale energy storage and power batteries due to abundance resource and low cost. However, the lack of anode materials with high-rate performance and high cycling-stability has limited the commercial application of SIBs. In this paper, Cu_7.2S₄@N, S co-doped carbon (Cu_7.2S₄@NSC) honeycomb-like composite structure was designed and prepared by a one-step high-temperature chemical blowing process. As an anode material for SIBs, Cu_7.2S₄@NSC electrode exhibited an ultra-high initial Coulomb efficiency (94.9%) and an excellent electrochemical property including a high reversible capacity of 441.3 mAh g^-1 after 100 cycles at 0.2 A g^-1, an excellent rate performance of 380.4 mAh g^-1 even at 5 A g^-1, and a superior long-cycle stability with a capacity retention rate of approximately 100% after 700 cycles at 1A g^-1.

Sodium alginate-based gel electrodes without binder for high-performance supercapacitors

Binder use results in an expansion of the dead volume of the active material and a decline in the active sites, which will lead to a decrease in the electrochemical activity of the electrode. Therefore, the construction of electrode materials without the binder has been the research focus. Here, a novel ternary composite gel electrode without the binder (reduced graphene oxide/sodium alginate/copper cobalt sulfide, rGSC) were designed using a convenient hydrothermal method. Benefiting from the dual-network structure of rGS via the hydrogen bonding between rGO and sodium alginate not only better encapsulates CuCo2S4 with high pseudo-capacitance, but also simplifies the electron transfer path, and reduces the electron transfer resistance, which leads to a remarkable enhanced electrochemical performance. The rGSC electrode exhibits a specific capacitance of up to 1600.25 F g-1 when the scan rate is 10 mV s-1. The asymmetric supercapacitor was constructed with rGSC and activated carbon as the positive and negative electrode in a 6 M KOH electrolyte. It has a large specific capacitance and high energy/power density (10.7 Wh kg-1/1329.1 W kg-1). This work proposes a promising strategy for designing gel electrodes for higher energy density and larger capacitance without the binder.

Emerging 2D Copper-Based Materials for Energy Storage and Conversion: A Review and Perspective

2D materials have shown great potential as electrode materials that determine the performance of a range of electrochemical energy technologies. Among these, 2D copper-based materials, such as Cu-O, Cu-S, Cu-Se, Cu-N, and Cu-P, have attracted tremendous research interest, because of the combination of remarkable properties, such as low cost, excellent chemical stability, facile fabrication, and significant electrochemical properties. Herein, the recent advances in the emerging 2D copper-based materials are summarized. A brief summary of the crystal structures and synthetic methods is started, and innovative strategies for improving electrochemical performances of 2D copper-based materials are described in detail through defect engineering, heterostructure construction, and surface functionalization. Furthermore, their state-of-the-art applications in electrochemical energy storage including supercapacitors (SCs), alkali (Li, Na, and K)-ion batteries, multivalent metal (Mg and Al)-ion batteries, and hybrid Mg/Li-ion batteries are described. In addition, the electrocatalysis applications of 2D copper-based materials in metal-air batteries, water-splitting, and CO₂ reduction reaction (CO₂ RR) are also discussed. This review also discusses the charge storage mechanisms of 2D copper-based materials by various advanced characterization techniques. The review with a perspective of the current challenges and research outlook of such 2D copper-based materials for high-performance energy storage and conversion applications is concluded.

A Novel Hierarchical Structure of SnCu2Se4/d-Ti3C2Tx/NPC for a Lithium/Sodium Ion Battery and Hybrid Capacitor with Long-Term Cycling Stabilities

To alleviate kinetics imbalance and capacity insufficiency simultaneously, a novel hierarchical structure (SnCu₂Se₄/d-Ti₃C₂T_x/NPC) composed of delaminated Ti₃C₂T_x, SnCu₂Se₄ nanoparticles, and N-doped porous carbon layers is designed as a battery-type anode for lithium/sodium ion hybrid capacitor (LIC/SIC). The combination of SnCu₂Se₄ nanoparticles with high specific capacity, d-Ti₃C₂T_x with accelerated ion diffusion path, and NPC with enhanced electronic conductivity makes the SnCu₂Se₄/d-Ti₃C₂T_x/NPC composite possess excellent cycling stabilities in half-cell lithium-ion and sodium-ion batteries (LIB and SIB), with capacities of 114 mAh g^-1 after 6000 cycles at 10 A g^-1 for LIB and 296 mAh g^-1 after 900 cycles at 1.0 A g^-1 for SIB. The rate performance is also outstanding, with recovered capacity of 738 mAh g^-1 at 0.1 A g^-1 after cycles at current densities up to 50 A g^-1 for LIB. Subsequently, LIC and SIC based on the SnCu₂Se₄/d-Ti₃C₂T_x/NPC anode and activated carbon cathode exhibit high energy densities of 147.9 and 158.6 Wh kg^-1 at a power density of 100 W kg^-1, respectively. They also possess distinctive long lifespans with capacity retentions of 78 and 81% after 10,000 cycles at 1.0 A g^-1, respectively, demonstrating the feasibility of SnCu₂Se₄/d-Ti₃C₂T_x/NPC toward energy devices requiring high energy density, power density, and long-term stability.

Efficiency of zero-dimensional and two-dimensional graphene architectural nanocomposites for organic transformations in the contemporary environment: a review

Graphene derivatives-based nanocatalyst finds increasing utilisation in the catalysis field for organic transformations. Researchers have been working on the development of graphene oxide, reduced graphene oxide, and graphene quantum dots with metal or metal oxide nanocomposites over the last few years. These materials exhibit excellent electrical, catalytic, optical, thermal, and magnetic properties. In particular, GO/rGO/GQDs composites assisted by metal or metal oxides have attracted broad attention for their possible applications in organic compound synthesis, drug delivery, sensors, devices, and the related areas of the environment. In this review, we have summarised GO/rGO/GQDs-metal or metal oxide composites using catalyst for organic conversions and synthesis of organic compounds in accordance with the discussion on the key problems and prospects for future study. Furthermore, there is a significant function for the catalytic efficiency of composites assisted by metal or metal oxide nanocatalyst which is categorised by graphene derivatives bases.

Ternary heterostructures of 1D/2D/2D CuCo2S4/CuS/Ti3C2 MXene: Boosted amperometric sensing for chlorpyrifos

Multicomponent heterogeneous Ti₃C₂ transition metal carbide (MXene)-based materials are receiving extensive research attention due to their interesting synergistic interactions and catalytic properties. However, the morphology-controllable synthesis of heterostructures as structural stabilizers for Ti₃C₂ MXene remains a challenge owing the complicated synthesis procedure. In this work, a kind of ternary heterogeneous nanomaterials CuCo₂S₄/CuS/Ti₃C₂ MXene with a nanorod/nanoplate/nanosheet hybrid architecture is constructed through a one-step low-temperature solvothermal method. The well-designed ternary one-dimensional (1D)/two-dimensional (2D)/2D CuCo₂S₄/CuS/Ti₃C₂ MXene heteromaterials exhibit synergistic improvements in substrate-catalyzed reactions for electrochemical acetylcholinesterase (AChE) biosensor. The Michaelis-Menten constant for the Nafion/AChE/CuCo₂S₄/CuS/Ti₃C₂ MXene/GCE biosensor is 228 μM, which is smaller than ones reported in previous literatures, indicating a higher affinity of the fabricated enzyme biosensor to acetylthiocholine chloride. The biosensor exhibits a well linear relationship with chlorpyrifos concentration ranging from 2.852 × 10^-12 M to 2.852 × 10^-6 M. The multicomponent 1D/2D/2D CuCo₂S₄/CuS/Ti₃C₂ MXene heteromaterial may shine a light in more electrochemical applications.

CuCo2S4@B,N-Doped Reduced Graphene Oxide Hybrid as a Bifunctional Electrocatalyst for Oxygen Reduction and Evolution Reactions

In this report, a facile synthetic route is adopted for typically designing a hybrid electrocatalyst containing boron, nitrogen dual-doped reduced graphene oxide (B,N-rGO) and thiospinel CuCo₂S₄ (CuCo₂S₄@B,N-rGO). The electrocatalytic activity of the hybrid catalyst is tested with respect to oxygen evolution (OER) and oxygen reduction (ORR) reactions in alkali. Physicochemical characterizations confirm the unique formation of a reduced graphene oxide-non-noble-metal sulfide hybrid. Electrochemical evaluation by cyclic voltammetry (CV) and linear-sweep voltammetry (LSV) reveals that the CuCo₂S₄@B,N-rGO hybrid possesses enhanced ORR and OER activity compared to the B,N-rGO-free CuCo₂S₄ catalyst. The synthesized CuCo₂S₄@B,N-rGO hybrid demonstrates remarkable enhancement in catalytic performance with an improved onset potential (1.50 and 0.88 V) and low Tafel slope (112 and 73 mV dec^-1) for both OER and ORR processes, respectively. In addition, the catalyst exhibits a diminutive potential difference (0.81 V) between the potential corresponding to the 10 mA cm^-2 current density for OER and the half-wave potential for ORR. The superior catalytic activity and high durability of the hybrid material may be attributed to the synergistic effect arising from the metal sulfide and dual-doped reduced graphene oxide. The present study illuminates the possibility of using the dual-doped graphene oxide and metal sulfide hybrid as a competent bifunctional cathode catalyst for renewable energy application.

Tuning composition of CuCo2S4-NiCo2S4 solid solutions via solvent-less pyrolysis of molecular precursors for efficient supercapacitance and water splitting

Mixed metal sulfides are increasingly being investigated because of their prospective applications for electrochemical energy storage and conversion. Their high electronic conductivity and high density of redox sites result in significant improvement of their electrochemical properties. Herein, the composition-dependent supercapacitive and water splitting performance of a series of Ni_(1−x)Cu_xCo₂S₄ (0.2 ≤ x ≤ 0.8) solid solutions prepared via solvent-less pyrolysis of a mixture of respective metal ethyl xanthate precursors is reported. The use of xanthate precursors resulted in the formation of surface clean nanomaterials at low-temperature. Their structural, compositional, and morphological features were examined by p-XRD, SEM, and EDX analyses. Both supercapacitive and electrocatalytic (HER, OER) properties of the synthesized materials significantly vary with composition (Ni/Cu molar content). However, the optimal composition depends on the application. The highest specific capacitance of 770 F g⁻¹ at a current density of 1 A g⁻¹ was achieved for Ni_0.6Cu_0.4Co₂S₄ (NCCS-2). This electrode exhibits capacitance retention (C_R) of 67% at 30 A g⁻¹, which is higher than that observed for pristine NiCo₂S₄ (838 F g⁻¹ at 1 A g⁻¹, 47% C_R at 30 A g⁻¹). On the contrary, Ni_0.4Cu_0.6Co₂S₄ (NCCS-3) exhibits the lowest overpotential of 124 mV to deliver a current density of 10 mA cm⁻². Finally, the best OER activity with an overpotential of 268 mV at 10 mA cm⁻² was displayed by Ni_0.8Cu_0.2Co₂S₄ (NCCS-1). The prepared electrodes exhibit high stability, as well as durability.

A multi-component CuCo₂S₄ and NiCo₂S₄ thiospinel solid solution is prepared over an entire range by a low-temperature solvent-less route. The synergistic effect from both thiospinels on water splitting and capacitance is studied.

Review on Material and Design of Anode for Microbial Fuel Cell

Microbial Fuel Cell (MFC) is a bio-electrochemical system that generates electricity by anaerobic oxidation of substrates. An anode is the most critical component because the primary conversion of wastewater into electrons and protons takes place on the surface of the anode, where a biofilm is formed. This paper describes the essential properties of the anode and classifies its types according to the material used to make it. Anode material is responsible for the flow of electrons generated by the microorganism; hence biocompatibility and conductivity can considered to be the two most important properties. In this paper, the various modification strategies to improve the performance of anodes of MFC are explained through the review of researchers’ published work in this field. The shape and size of the anode turned out to be very significant as the microbial growth depends on the available surface area. The attachment of biofilm on the surface of an anode largely depends on the interfacial surface chemistry. Methods for improving MFC performance by altering the anode material, architecture, biocompatibility, and longevity are discussed with a future perspective giving special importance to the cost.

Implantation of Fe7S8 nanocrystals into hollow carbon nanospheres for efficient potassium storage

As a desirable candidate for lithium-ion batteries, potassium-ion batteries (PIBs) have aroused great interest because of their low cost and high power and energy densities. However, the insertion/extraction of K⁺ with a large radius (1.38 Å) usually bring about the destruction of the electrode materials. Here, ultrafine Fe₇S₈ nanocrystals are successfully implanted into hollow carbon nanospheres (Fe₇S₈@HCSs) via a facile solvothermal method and subsequent novel low-temperature sulfurization, which avoid the aggregation of Fe₇S₈ nanoparticles produced during high-temperature sulfidation. The ultrafine Fe₇S₈ nanoparticles and hollow carbon spheres can not only buffer the severe expansion/shrinkage of electrode materials caused by the repeated insertion/extraction of K⁺, but also provide additional accessible pathways for the high-rate K⁺ transmission. When tested as an anode material for PIBs, Fe₇S₈@HCSs achieve impressive K⁺ storage capacity of 523.2 mAh g^-1 at 0.1 A g^-1 after 100 cycles and remarkable rate capacity of 176.3 mAh g^-1 at 5 A g^-1. Further, assembling this anode with a K₂NiFe(CN)₆ cathode yields stable cycling performance, revealing its great potential for large-scale energy storage applications.

Heterostructured CoS2/CuCo2S4@N-doped carbon hollow sphere for potassium-ion batteries

Potassium ions batteries (PIBs) have been regarded as a promising choice for electrical energy storage technology due to the wide distribution of potassium resources. However, developing low-cost and robust earth-rich anode materials is still a major challenge for the practical and scalable usage of PIBs. Herein, for the first time, we developed nitrogen doped carbon coating CoS₂/CuCo₂S₄ heterostructure (CoS₂/CuCo₂S₄@NCs) hollow spheres and evaluated as anode for PIBs. The CoS₂ and CuCo₂S₄ heterostructure interface could generate a built-in electric field, which can fasten electrons transportation. The nanostructures could shorten the diffusion length of K⁺ and provide large surface area to contact with electrolytes. Furthermore, the inner hollow sphere morphology along with the carbon layer could accommodate the volume expansion during cycling. What's more, the N-doped carbon could increase the conductivity of the anodes. Benefitting from the above features, the CoS₂/CuCo₂S₄@NCs displays an outstanding rate capability (309 mAh g^-1 at 500 mA g^-1 after 250 cycles) and a long-term cycling life (112 mAh g^-1 at 1000 mA g^-1 after 1000 cycles) in ether-based electrolyte. Conversion reaction mechanism in CoS₂/CuCo₂S₄@NCs anode is also revealed through ex situ XRD characterizations. This work provides a practical direction for investigating metal sulfides as anode for PIBs.

Low temperature scalable synthetic approach enabling high bifunctional electrocatalytic performance of NiCo2S4 and CuCo2S4 thiospinels

Ternary metal sulfides are currently in the spotlight as promising electroactive materials for high-performance energy storage and/or conversion technologies. Extensive research on metal sulfides has indicated that, amongst other factors, the electrochemical properties of the materials are strongly influenced by the synthetic protocol employed. Herein, we report the electrochemical performance of uncapped NiCo₂S₄ and CuCo₂S₄ ternary systems prepared via solventless thermolysis of the respective metal ethyl xanthate precursors at 200 and 300 °C. The structural, morphological and compositional properties of the synthesized nanoparticles were examined by powder X-ray diffraction (p-XRD), transmission electron microscopy (TEM), high-resolution TEM, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX) techniques. Electrochemical studies indicate that NiCo₂S₄ nanoparticles synthesized at 300 °C exhibit superior energy storage characteristics with a high specific capacitance of ca. 2650 F g⁻¹ at 1 mV s⁻¹, as compared to CuCo₂S₄ nanoparticles, which showcased a specific capacitance of ca. 1700 F g⁻¹ at the same scan rate. At a current density of 0.5 A g⁻¹, NiCo₂S₄ and CuCo₂S₄ nanoparticles displayed specific capacitances of 1201 and 475 F g⁻¹, respectively. In contrast, CuCo₂S₄ nanoparticles presented a higher electrocatalytic activity with low overpotentials of 269 mV for oxygen evolution reaction (OER), and 224 mV for the hydrogen evolution reaction (HER), at 10 mA cm⁻². The stability of the catalysts was examined for 2000 cycles in which a negligible change in both OER and HER activities was observed.

A scalable solventless approach is employed to prepare NiCo₂S₄ and CuCo₂S₄ with bare surface for enhanced supercapacitance and water splitting. The particles exhibit good energy storage and electrocatalytic activity as well as stability.

A sandwich nanocomposite composed of commercially available SnO and reduced graphene oxide as advanced anode materials for sodium-ion full batteries

A sandwich structure with SnO and reduced graphene oxide (SnO/rGO) is designed via freeze drying. It delivers a specific capacity of 109.5 mA h g⁻¹ with a retention of 70.62% after 1200 cycles at 4 A g⁻¹, revealing its stable cycling performance.

Advances and Challenges in Developing Efficient Graphene Oxide-Based ZnO Photocatalysts for Dye Photo-Oxidation

The efficient remediation of organic dyes from wastewater is increasingly valuable in water treatment technology, largely owing to the tons of hazardous chemicals currently and constantly released into rivers and seas from various industries, including the paper, pharmaceutical, textile, and dye production industries. Using solar energy as an inexhaustible source, photocatalysis ranks among the most promising wastewater treatment techniques for eliminating persistent organic pollutants and new emerging contaminants. In that context, developing efficient photocatalysts using sunlight irradiation and effectively integrating them into reactors, however, pose major challenges in the technologically relevant application of photocatalysts. As a potential solution, graphene oxide (GO)-based zinc oxide (ZnO) nanocomposites may be used together with different components (i.e., ZnO and GO-based materials) to overcome the drawbacks of ZnO photocatalysts. Indeed, mounting evidence suggests that using GO-based ZnO nanocomposites can promote light absorption, charge separation, charge transportation, and photo-oxidation of dyes. Despite such advances, viable, low-cost GO-based ZnO nanocomposite photocatalysts with sufficient efficiency, stability, and photostability remain to be developed, especially ones that can be integrated into photocatalytic reactors. This article offers a concise overview of state-of-the-art GO-based ZnO nanocomposites and the principal challenges in developing them.

Recent Advances of Bimetallic Sulfide Anodes for Sodium Ion Batteries

The high usage for new energy has been promoting the next-generation energy storage systems (ESS). As promising alternatives to lithium ion batteries (LIBs), sodium ion batteries (SIBs) have caused extensive research interest owing to the high natural Na abundance of 2.4 wt.% (vs. 0.0017 wt.% for Li) in the earth's crust and the low cost of it. The development of high-performance electrode materials has been challenging due to the increase in the feasibility of SIBs technology. In the past years, bimetallic sulfides (BMSs) with high theoretical capacity and outstanding redox reversibility have shown great promise as high performance anode materials for SIBs. Herein, the recent advancements of BMSs as anode for SIBs are reported, and the electrochemical mechanism of these electrodes are systematically investigated. In addition, the current issues, challenges, and perspectives are highlighted to address the extensive understanding of the associated electrochemical process, aiming to provide an insightful outlook for possible directions of anode materials for SIBs.

VS4 -Decorated Carbon Nanotubes for Lithium Storage with Pseudocapacitance Contribution

The application of metal oxides and sulfides for lithium-ion batteries (LIBs) is hindered by the limited Li⁺ diffusion kinetics and inevitable structural damage. Pseudocapacitance for electrochemical lithium storage provides an effective and competitive solution for developing electrode materials with large capacity, high rate capability, and stability. Herein, a composite composed of VS₄ nanoplates tightly bound to carbon nanotubes (VS₄ /CNTs) is developed to demonstrate pseudocapacitance-assisted lithium storage. The texture of the assembled VS₄ nanoplates supplies efficient electrolyte/ion diffusion, as well as exposed surface for pseudocapacitive behavior. The effective coupling between VS₄ and CNTs ensures fast electron transfer and high stability. The VS₄ /CNTs anode exhibits high capacity of 1144 mAh g^-1 at 0.1 A g^-1 , superior cycling stability (capacity retention of 100 % at 1 A g^-1 after 400 cycles), and good rate capability. The pseudocapacitive behavior plays an important role in determining the excellent electrochemical properties, contributing to the increased charge rate and reaching as high as 42 % of the total charge at a scan rate of 1 mV s^-1 . This study demonstrates the potential application of metal sulfides with pseudocapacitive contribution in LIBs.

The construction of CuCo2O4/N-doped reduced graphene oxide hybrid hollow spheres as anodes for sodium-ion batteries

Hierarchical CuCo₂O₄/N-doped reduced graphene oxide (CuCo₂O₄/N-rGO) hollow hybrid nanospheres was constructed and further applied as highly capacity anode materials for SIBs.

NiGa2O4/rGO Composite as Long-Cycle-Life Anode Material for Lithium-Ion Batteries

This work reports a novel Ga-based material, NiGa₂O₄, which is typically used as a photocatalyst for water splitting, as an anode for Li-ion battery with a long cycle life. High-surface-area reduced graphene oxide (rGO) has been used as the conductive substrate to avoid the aggregation of NiGa₂O₄ nanoparticles (NPs). Because the size and shape of NiGa₂O₄ are very sensitive to the pH of the precursor, ethylene glycol has been employed as the solvent, as well as the reduction agent to reduce GO, to avoid using extra surfactants and also to avoid the variation of pH of the precursor. The obtained NiGa₂O₄/rGO composite possesses high capacity and long cycle life (2000 cycles, 2 A/g), with NiGa₂O₄ NPs around 3-4 nm that are uniformly distributed on the rGO surface. Full cell performance with LiCoO₂ as cathode has also been studied, with the average loss of 0.04% per cycle after 100 cycles (C/2 of LiCoO₂). The long cycle life of the composite was ascribed to the self-healing feature of Ga⁰ formed during charging.

BiSbS3@N-doped carbon core–shell nanorods as efficient anode materials for sodium-ion batteries

BiSbS₃@N-doped carbon (NC) core–shell nanorods were prepared through a simple preparation process.