Confining ferric oxides in porous carbon for efficient lithium storage

Trace Fluorinated Carbon Dots Driven Li-Garnet Solid-State Batteries

Garnet solid-state electrolyte Li6.5La3Zr1.5Ta0.5O12 (LLZTO) holds significant promise. However, the practical utilization has been seriously impeded by the poor contact of Li|garnet and electron leakage. Herein, one new type of garnet-based solid-state battery is proposed with high performance through the disparity in interfacial energy, induced by the reaction between trace fluorinated carbon dots (FCDs) and Li. The work of adhesion of Li|garnet is increased by the acquired Li-FCD composite, which facilitates an intimate Li|garnet interface with the promoted uniform Li+ deposition, revealed by density functional theory (DFT) calculations. It is further validated that a concentrated C-Li2O-LiF component at the Li|garnet interface is spontaneously constructed, due to the significant disparity in interfacial energy between C-Li2O-LiF|LLZTO and C-Li2O-LiF|Li. Furthermore, The electron transport and Li dendrites penetration are effectively hindered by the formed Li2O and LiF. The Li-FCD|LLZTO|Li-FCD symmetrical cells demonstrate stable cycling performance for over 3000 hours at 0.3 mA cm-2 and 800 hours at 0.5 mA cm-2. Furthermore, the LFP|garnet|Li-FCD full cell exhibits remarkable cycling performance (91.6 % capacity retention after 500 cycles at 1 C). Our research has revealed a novel approach to establish a dendrite-free Li|garnet interface, laying the groundwork for future advancements in garnet-based solid-state batteries.

Enhancing lithium/sodium-ion storage behaviors in a V2O5 nanosheet by freeze-drying

A porous V2O5 nanosheet is synthesized via freeze-drying followed by a heat-treatment process.

Elevating Energy Density for Sodium-Ion Batteries through Multielectron Reactions

It remains a great challenge to explore desirable cathodes for sodium-ion batteries to satisfy the ever-increasing demand for large-scale energy storage systems. In this Letter, we report a NASICON-structured Na₄MnCr(PO₄)₃ cathode with high specific capacity and operation potential. The reversible access of the Mn²⁺/Mn³⁺ (3.75/3.4 V), Mn³⁺/Mn⁴⁺ (4.25/4.1 V), and Cr³⁺/Cr⁴⁺ (4.4/4.3 V vs Na/Na⁺) redox couples in a Na₄MnCr(PO₄)₃ cathode endows a distinct three-electron redox reaction during the insertion/extraction process. The highly stable NASICON structure with a small volume variation upon cycling ensures long-time cycling stability (73.3% capacity retention after 500 cycles within the potential region of 2.5-4.6 V). The impedance analysis and interface characterization indicate that the evolution of a cathode electrolyte interphase at high potential is correlated with the capacity fading, while the robustness of the NASICON framework is redemonstrated.

Fabrication of 3D binder-free graphene NiO electrode for highly stable supercapattery

Electrochemical stability of energy storage devices is one of their major concerns. Polymeric binders are generally used to enhance the stability of the electrode, but the electrochemical performance of the device is compromised due to the poor conductivity of the binders. Herein, 3D binder-free electrode based on nickel oxide deposited on graphene (G-NiO) was fabricated by a simple two-step method. First, graphene was deposited on nickel foam via atmospheric pressure chemical vapour deposition followed by electrodeposition of NiO. The structural and morphological analyses of the fabricated G-NiO electrode were conducted through Raman spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and energy dispersive X-ray spectroscopy (EDS). XRD and Raman results confirmed the successful growth of high-quality graphene on nickel foam. FESEM images revealed the sheet and urchin-like morphology of the graphene and NiO, respectively. The electrochemical performance of the fabricated electrode was evaluated through cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS) in aqueous solution at room temperature. The G-NiO binder-free electrode exhibited a specific capacity of ≈ 243 C g-1 at 3 mV s-1 in a three-electrode cell. A two-electrode configuration of G-NiO//activated charcoal was fabricated to form a hybrid device (supercapattery) that operated in a stable potential window of 1.4 V. The energy density and power density of the asymmetric device measured at a current density of 0.2 A g-1 were estimated to be 47.3 W h kg-1 and 140 W kg-1, respectively. Additionally, the fabricated supercapattery showed high cyclic stability with 98.7% retention of specific capacity after 5,000 cycles. Thus, the proposed fabrication technique is highly suitable for large scale production of highly stable and binder-free electrodes for electrochemical energy storage devices.