A three-dimensional conductive molecularly imprinted electrochemical sensor based on MOF derived porous carbon/carbon nanotubes composites and prussian blue nanocubes mediated amplification for chiral analysis of cysteine enantiomers

An ionic liquid-modified PEDOT/Ti3C2TX based molecularly imprinted electrochemical sensor for pico-molar sensitive detection of L-Tryptophan in milk

L-Tryptophan (L-Trp) is essential for the human body and can only be obtained externally. It is important to develop a method to efficiently detect L-Trp in food. In this work, ionic liquid (IL) modified poly(3,4-ethylendioxythiophene)/ Titanium carbide (PEDOT/Ti3C2TX) was used as a substrate material to improve detection sensitivity. Molecular imprinted polymers (MIP) film for specific recognition of L-Trp was fabricated on the surface of modified electrodes using electrochemical polymerization. The monitoring results showed that the molecularly imprinted electrochemical sensors (MIECS) exhibited good linearity ranges (10-6 - 0.1 μM and 0.1-100 μM) with a low detection limit (LOD) of 2.09 × 10-7 μM. In addition, the MIECS exhibited remarkable stability, reproducibility, and immunity to interference. A good recovery (93.54-99.59%) was demonstrated in the detection of milk. The sensor was expected to be developed as a highly selective and sensitive portable assay, and applied to the detection of L-Trp in food.

Functionalized Chiral Materials for Use in Chiral Sensors

Chirality represents a fundamental attribute within living systems and is a pervasive phenomenon in the natural world. The identification and analysis of chiral materials within natural environments and biological systems hold paramount importance in clinical, chemical, and biological sciences. Within chiral analysis, there is a burgeoning focus on developing chiral sensors exhibiting exceptional selectivity, sensitivity, and stability, marking it as a forefront area of research. In the past decade (2013-2023), approximately 1990 papers concerning the application of various chiral materials in chiral sensors have been published. Biological materials and nanomaterials have important applications in the development of chiral sensors, which accounting for 26.67% and 45.24% of the material-related applications in these sensors, respectively; moreover, the development of chiral nanomaterials is closely related to the development of portable and stable chiral sensors. Natural chiral materials, utilized as selective recognition units, are combined with carriers characterized by good physical and chemical properties through functionalization to form various functional chiral materials, which improve the recognition efficiency of chiral sensors. In this article, from the perspective of biological materials, polymer materials, nanomaterials, and other functional chiral materials, the applications of chiral sensors are summarized and the research prospects of chiral sensors are discussed.

Recent Advances in Electrochemical Sensors for Sulfur-Containing Antioxidants

Sulfur-containing antioxidants are an important part of the antioxidant defense systems in living organisms under the frame of a thiol-disulfide equilibrium. Among them, l-cysteine, l-homocysteine, l-methionine, glutathione, and α-lipoic acid are the most typical representatives. Their actions in living systems are briefly discussed. Being electroactive, sulfur-containing antioxidants are interesting analytes to be determined using various types of electrochemical sensors. Attention is paid to the chemically modified electrodes with various nanostructured coverages. The analytical capabilities of electrochemical sensors for sulfur-containing antioxidant quantification are summarized and discussed. The data are summarized and presented on the basis of the electrode surface modifier applied, i.e., carbon nanomaterials, metal and metal oxide nanoparticles (NPs) and nanostructures, organic mediators, polymeric coverage, and mixed modifiers. The combination of various types of nanomaterials provides a wider linear dynamic range, lower limits of detection, and higher selectivity in comparison to bare electrodes and sensors based on the one type of surface modifier. The perspective of the combination of chromatography with electrochemical detection providing the possibility for simultaneous determination of sulfur-containing antioxidants in a complex matrix has also been discussed.

Magnetic MXene-based molecularly imprinted electrochemical sensor for methylmalonic acid

A novel magnetic Ti₃C₂T_x-MXene/Fe₃O₄ composite was prepared from Ti₃C₂T_x and magnetic Fe₃O₄. The characterizations by electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) exhibited that the Ti₃C₂T_x/Fe₃O₄ nanomaterial presented an outstanding conductivity and a large specific area, which could improve the electron transfer rate, leading to the amplification of the sensor's signal. Furthermore, an ultrasensitive molecularly imprinted electrochemical sensor based on MXene/Fe₃O₄ composites was fabricated for detecting methylmalonic acid (MMA) with high selectivity. The current intensity of differential pulse voltammetry of the sensor presented a good linear relationship with the logarithm of MMA concentration ranging from 9 × 10^-15 mol L^-1 to 9 × 10^-13 mol L^-1. The detection limit of the sensor was 2.33 × 10^-16 mol L^-1. The fabricated sensor was utilized for detecting MMA in human serum samples with excellent recoveries. Therefore, this method significantly improved the sensitivity of detection, and constitutes an  affordable sensing platform for trace detection of organic carboxylic acid.

Nanomaterial-based electrochemical sensors for detection of amino acids

Amino acids are the building blocks of proteins and muscle tissue. They also play a significant role in physiological processes related to energy, recovery, mood, muscle and brain function, fat burning and stimulating growth hormone or insulin secretion. Accurate determination of amino acids in biological fluids is necessary because any changes in their normal ranges in the body warn diseases like kidney disease, liver disease, type 2 diabetes and cancer. To date, many methods such as liquid chromatography, fluorescence mass spectrometry, etc. have been used for the determination of amino acids. Compared with the above techniques, electrochemical systems using modified electrodes offer a rapid, accurate, cheap, real-time analytical path through simple operations with high selectivity and sensitivity. Nanomaterials have found many interests to create smart electrochemical sensors in different application fields e.g. biomedical, environmental, and food analysis because of their exceptional properties. This review summarizes recent advances in the development of nanomaterial-based electrochemical sensors in 2017-2022 for the detection of amino acids in various matrices such as serum, urine, blood and pharmaceuticals.

Progress and opportunities for metal-organic framework composites in electrochemical sensors

Metal-organic framework composites have the advantages of large surface area, high porosity, strong catalytic efficiency and good stability, which provide a great possibility of finding excellent electrode materials for electrochemical sensors. However, MOF composites still face various challenges and difficulties, which limit their development and application. This paper reviews the application of MOF composites in electrochemical sensors, including MOF/carbon composites, MOF/metal nanoparticle composites, MOF/metal oxide composites and MOF/enzyme composites. In addition, the application challenges of MOF composites in electrochemical sensors are summarized. Finally, the application prospect for MOF composites is considered to promote the synthesis of more MOF composites with excellent properties.

Highly Efficient versus Null Electrochemical Enantioselective Recognition Controlled by Achiral Colinkers in Homochiral Metal-Organic Frameworks

Chiral materials capable of electrochemical enantiomeric recognition are highly desirable for many applications, but it is still very challenging to achieve high recognition efficiency for lack of the knowledge of structure-property relationships. Here, we report the completely distinct enantiomeric recognition related to slightly different achiral colinkers in isomorphic homochiral metal-organic frameworks with the same chiral linker. Cu-TBPBe, for which the achiral colinker has two pyridyl rings connected by ─CH═CH─, shows excellent enantioselectivity and sensitivity for electrochemical recognition of l-tryptophan (Trp) with a detection limit of 3.16 nM. The l-to-d ratio of differential pulse voltammetric (DPV) currents reaches 53, which is much higher than the values (2-14) reported for previous electrochemical sensors. By contrast, Cu-TBPBa, in which the achiral colinker has -CH₂-CH₂- between pyridyl rings, is incapable of discrimination between l-Trp and d-Trp. Structural and spectral analyses suggest that the achiral conjugated colinker and the chiral moieties around it cooperate to produce a chiral pocket in favor of enantioselective adsorption through multiple hydrogen-bonding and π-π stacking interactions. The work demonstrated that Cu-TBPBe can be used to fabricate reliable electrochemical sensors for ultrasensitive quantification of Trp enantiomers in racemic mixtures and in complex biological systems such as urine. The work also highlights that an achiral coligand can be of vital importance in determining enantiomeric discrimination, opening up a new avenue for the design of chiral sensing materials.

A Review on CNTs-Based Electrochemical Sensors and Biosensors: Unique Properties and Potential Applications

Carbon nanotubes (CNTs), are safe, biocompatible, bioactive, and biodegradable materials, and have sparked a lot of attention due to their unique characteristics in a variety of applications, including medical and dye industries, paper manufacturing and water purification. CNTs also have a strong film-forming potential, permitting them to be widely employed in constructing sensors and biosensors. This review concentrates on the application of CNT-based nanocomposites in the production of electrochemical sensors and biosensors. It emphasizes the synthesis and optimization of CNT-based sensors for a range of applications and outlines the benefits of using CNTs for biomolecule immobilization. In addition, the use of molecularly imprinted polymer (MIP)-CNTs in the production of electrochemical sensors is also discussed. The challenges faced by the current CNTs-based sensors, along with some the future perspectives and their future opportunities, are also briefly explained in this paper.

Ultrasensitive Determination of Glial-Fibrillary-Acidic-Protein (GFAP) in Human Serum-Matrix with a Label-Free Impedimetric Immunosensor

In this work, immobilizing anti-GFAP antibodies via covalent attachment onto L-cysteine/gold nanoparticles that were modified with screen-printed carbon electrodes (Anti-GFAP/L-cys/AuNps/SPCE) resulted in the development of a sensitive label-free impedance immunosensor for the detection of Glial Fibrillary Acidic Protein (GFAP). The immunosensor's stepwise construction was studied using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). L-cysteine was chosen as the linker between GFAP antibodies and Au NPs/SPCE because it enables the guided and stable immobilization of GFAP antibodies, thus resulting in increased immunosensor sensitivity. As a redox probe, 5 mM of [Fe(CN)6]3-/4- was used to measure the electron-transfer resistance (Ret), which was raised by the binding of antigens to the immobilized anti-GFAP on the surface of the modified electrode. A linear correlation between Rct and GFAP concentration was achieved under optimum conditions in the range of 1.0-1000.0 pg/mL, with an extraordinarily low detection limit of 51.0 fg/mL. The suggested immunosensor was successfully used to detect the presence of GFAP in human blood serum samples, yielding good findings. As a result, the proposed platform may be utilized to monitor central nervous system injuries.

Metal-Organic Frameworks Meet Molecularly Imprinted Polymers: Insights and Prospects for Sensor Applications

The use of porous materials as the core for synthesizing molecularly imprinted polymers (MIPs) adds significant value to the resulting sensing system. This review covers in detail the current progress and achievements regarding the synergistic combination of MIPs and porous materials, namely metal/covalent-organic frameworks (MOFs/COFs), including the application of such frameworks in the development of upgraded sensor platforms. The different processes involved in the synthesis of MOF/COF-MIPs are outlined, along with their intrinsic properties. Special attention is paid to debriefing the impact of the morphological changes that occur through the synergistic combination compared to those that occur due to the individual entities. Thereafter, the strategies used for building the sensors, as well as the transduction modes, are overviewed and discussed. This is followed by a full description of research advances for various types of MOF/COF-MIP-based (bio)sensors and their applications in the fields of environmental monitoring, food safety, and pharmaceutical analysis. Finally, the challenges/drawbacks, as well as the prospects of this research field, are discussed in detail.

MIL-53(Fe)-derived ant nest structured porous carbon nanospheres CuFeS2 /C for the determination of atropine enantiomeric impurity L-hyoscyamine

In this work, an ant nest structured porous carbon nanosphere had been developed for the recognition detection of the atropine (ATP) enantiomers D-hyoscyamine (D-HSM) and L-hyoscyamine (L-HSM). Firstly, Fe-based organic framework was used as the substrate, and Cu ions and sulfur ions were separately introduced to obtain CuFeS₂ with ant nest structure by hydrothermal incubation. Then CuFeS₂ /C porous nanospheres (PNSs) were obtained by high-temperature calcination. The composite-modified electrode exhibited superior electrochemical performance for L-HSM due to the synergistic effect of CuFeS₂ cubic crystals and porous carbon, which has the high specific surface area of the ant nest structure. In addition, the molecularly imprinted polymer (MIP) about L-HSM formed with sulfonated-β-cyclodextrin (S-β-CD) and L-arginine (L-Arg) by cyclic voltammetry showed strong chiral recognition of D/L-HSM (ATP). Therefore, a novel electrochemical sensor was constructed based on CuFeS₂ /C PNSs and MIP to detect L-HSM by differential pulse voltammetry. Under the optimal conditions, the peak current density of L-HSM showed a good linearity in the concentration range of 0.02-4.6 μM with LOD and LOQ of 0.45 and 1.5 nM, respectively. The oxidation peaks of L-HSM and D-HSM were successfully identified from the racemic ATP, and the oxidation peak potential difference (ΔE_p ) between them was 0.138 V. In conclusion, the sensor showed excellent reproducibility, repeatability, and stability and had been applied to the determination of L-HSM in human serum, saliva, and ATP sulfate tablets with satisfactory results.

Detection of chlorpyrifos based on molecular imprinting with a conducting polythiophene copolymer loaded on multi-walled carbon nanotubes

Molecular imprinting technique (MIT) with electrochemical sensing provides an attractive tool for the fabrication of sensors. Incorporation of conducting copolymer and surface imprinting strategies in the sensing device improves the conducting properties and poor template accessibility, slow binding kinetics at the same time. Here, this technique was employed with conducting polymers with multi-walled carbon nanotubes (MWCNT) to build an electrochemical sensor for detecting Chlorpyrifos (CPF) in vegetable sample solutions. In this work, we aimed at synthesizing a copolymer of 3-thiophene acetic acid and 3,4-ethylene dioxythiophene on the surface of MWCNT. We further constructed a polymer drop-casted glassy carbon electrode sensor for ultrasensitive detection CPF. Under optimal conditions, the sensor exhibited a very low limit of detection (LOD) of 4.0 × 10^-12 M for CPF. Due to the excellent repeatability and reusability of the materials, this study and findings have potential applications in the monitoring of pesticides from vegetable samples.

Intrinsically Breathable and Flexible NO2 Gas Sensors Produced by Laser Direct Writing of Self-Assembled Block Copolymers

The surge in air pollution and respiratory diseases across the globe has spurred significant interest in the development of flexible gas sensors prepared by low-cost and scalable fabrication methods. However, the limited breathability in the commonly used substrate materials reduces the exchange of air and moisture to result in irritation and a low level of comfort. This study presents the design and demonstration of a breathable, flexible, and highly sensitive NO₂ gas sensor based on the silver (Ag)-decorated laser-induced graphene (LIG) foam. The scalable laser direct writing transforms the self-assembled block copolymer and resin mixture with different mass ratios into highly porous LIG with varying pore sizes. Decoration of Ag nanoparticles on the porous LIG further increases the specific surface area and conductivity to result in a highly sensitive and selective composite to detect nitrogen oxides. The as-fabricated Ag/LIG gas sensor on a flexible polyethylene substrate exhibits a large response of -12‰, a fast response/recovery of 40/291 s, and a low detection limit of a few parts per billion at room temperature. Integrating the Ag/LIG composite on diverse fabric substrates further results in breathable gas sensors and intelligent clothing, which allows permeation of air and moisture to provide long-term practical use with an improved level of comfort.

Overoxidation of Intrinsically Conducting Polymers

Intrinsically conducting polymers may undergo significant changes of molecular structure and material properties when exposed to highly oxidizing conditions or very positive electrode potentials, commonly called overoxidation. The type and extent of the changes depend on the experimental conditions and chemical environment. They may proceed already at much lower rates at lower electrode potentials because some of the processes associated with overoxidation are closely related to more or less reversible redox processes employed in electrochemical energy conversion and electrochromism. These changes may be welcome for some applications of these polymers in sensors, extraction, and surface functionalization, but in many cases, the change of properties affects the performance of the material negatively, contributing to material and device degradation. This report presents published examples, experimental observations, and their interpretations in terms of both structural and of material property changes. Options to limit and suppress overoxidation are presented, and useful applications are described extensively.

Fabrication and application of three-dimensional nanocomposites modified electrodes for evaluating the aging process of Huangjiu (Chinese rice wine)

In this study, three modified glassy carbon electrodes based on three-dimensional conducting polymer nanocomposites (TDCPNs) were fabricated for evaluating the aging process of Huangjiu (Chinese rice wines). The electrochemical activity and experimental conditions of the TDCPNs modified electrodes were investigated by cyclic voltammetry, the aging information obtained by the modified electrodes were optimized by variance inflation factor (VIF). Principal components analysis (PCA), locally linear embedding (LLE), and locality preserving projection (LPP, which presented the best classification result) based on the optimized data were applied to classify the wine samples. Then, the dimensionality reduction data of PCA, LLE, and LPP were used as input variables of the logistic regression and extreme learning machine (ELM) for evaluating the aging process of Huangjiu, and the LLE-ELM method exhibited the best prediction results. These results demonstrated that the TDCPNs modified electrodes presented the potential for the quality analysis of food and beverages.

An electrochemical sensor based on electrospun MoS2@SnO2 modified carbon nanofiber composite materials for simultaneously detection ofphenacetin and indomethacin

SnO 2 -CNF was prepared by coaxial blending technology, and MoS 2 was grown uniformly on SnO 2 -CNF composite by combining hydrothermal post-treatment step. The uniform distribution of MoS 2 on one-dimensional SnO 2 -CNF can effectively establish a layered three-dimensional structure. So that the prepared MoS 2 coated SnO 2 -CNF composite material has higher surface area and more active sites to obtain better electrochemical performance. We constructed an electrochemical sensor within the composite material with enhanced performance to realize the simultaneous and highly sensitive detection of phenacetin and indomethacin for the first time. The sensor proves the linear ranges of 0.050-7200 μM and 0.05-500 μM respectively, and the detection limits were 0.016 μM and 0.013 μM. And the sensor has good anti-interference ability and stability, which also achieves good recovery rate in the actual sample detection .

Doped Polythiophene Chiral Electrodes as Electrochemical Biosensors

π-conducting materials such as chiral polythiophenes exhibit excellent electrochemical stability in doped and undoped states on electrode surfaces (chiral electrodes), which help tune their physical and electronic properties for a wide range of uses. To overcome the limitations of traditional surface immobilization methods, an alternative pathway for the detection of organic and bioorganic targets using chiral electrodes has been developed. Moreover, chiral electrodes have the ability to carry functionalities, which helps the immobilization and recognition of bioorganic molecules. In this review, we describe the use of polythiophenes for the design of chiral electrodes and their applications as electrochemical biosensors.

Electrochemical Amino Acid Sensing: A Review on Challenges and Achievements

The rapid growth of research in electrochemistry in the last decade has resulted in a significant advancement in exploiting electrochemical strategies for assessing biological substances. Among these, amino acids are of utmost interest due to their key role in human health. Indeed, an unbalanced amino acid level is the origin of several metabolic and genetic diseases, which has led to a great need for effective and reliable evaluation methods. This review is an effort to summarize and present both challenges and achievements in electrochemical amino acid sensing from the last decade (from 2010 onwards) to show where limitations and advantages stem from. In this review, we place special emphasis on five well-known electroactive amino acids, namely cysteine, tyrosine, tryptophan, methionine and histidine. The recent research and achievements in this area and significant performance metrics of the proposed electrochemical sensors, including the limit of detection, sensitivity, stability, linear dynamic range(s) and applicability in real sample analysis, are summarized and presented in separate sections. More than 400 recent scientific studies were included in this review to portray a rich set of ideas and exemplify the capabilities of the electrochemical strategies to detect these essential biomolecules at trace and even ultra-trace levels. Finally, we discuss, in the last section, the remaining issues and the opportunities to push the boundaries of our knowledge in amino acid electrochemistry even further.

Chiral UiO-MOFs based QCM sensors for enantioselective discrimination of hazardous biomolecule

Developments of enantioselective devices for discriminating bio-enantiomers is of significant importance. Due to the vital role of Cysteine (Cys) in biological processes and the hazardous effect of its D-enantiomer, discriminating Cys enantiomers without auxiliary enzyme is highly wanted. In this work, a pair of UiO-MOF enantiomers (UiO-tart) have been fabricated through post-modification, which could be further fabricated into enantiomeric sensing devices (UiO-tart@Au). By employing the Quartz Crystal Microbalance (QCM) technology, gravimetric discrimination of Cys enantiomers could be achieved. UiO-tart@Au is highly enantioselective, and the afforded enantioselective factor (5.97 ± 0.54) represents the best performance reported ever. In the fabricated device, MOF layer acts as the chiral selector for specific Cys enantiomer, and the reaction between the captured Cys enantiomer and Au results in the mass growth of the system. Solid-phase extraction (SPE) gives an e.e. value of 71.6 ± 3.8%, substantially confirming the chiral-selector role of UiO-tart. DFT calculations indicate that enantiomeric H-bonding effect and greater reaction enthalpy should be the reason. To the best of our knowledge, this work represents the first example of chiral tartaric acid derived MOF sensors for enantioselective discrimination of Cys, suggesting a promising potential of developing chiral MOFs based devices for enhanced enantioselective application.

A disposable dual-signal enantioselective electrochemical sensor based on stereogenic porous chiral carbon nanotubes hydrogel

As the highest form of molecular recognition, the chiral molecular recognition is the most difficult measurements. Herein, a disposable dual-signal enantioselective platform was fabricated based on stereoscopic porous chiral carbon nanotubes hydrogel modified screen printed electrode. This kind of chiral hydrogel was prepared by a simple heating method with l-cysteine and chiral single-walled carbon nanotubes of chirality (6,5), and its dispersion and morphology were characterized by several techniques including scanning electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy. The stereogenic chiral interface was successfully employed to discriminate mandelic acid enantiomers via both oxidation peak intensity and peak potential value of cyclic voltammetry. The chiral recognition mechanism was discussed specifically, which resulted from the formation of an efficient three-dimensional chiral nanospace. The inherent chirality of chiral carbon nanotubes hydrogel, together with their orderly spatial arrangement, can significantly improve the efficiency of chiral recognition compared with traditional electrochemical chiral sensors. As a novel chiral sensing interface, such chiral carbon nanotubes hydrogel was simple to prepare, fast to operate, with good sensitivity and excellent stability for the construction of efficient and practical electrochemical chiral sensors.

Cobalt(II)-ion-exchanged Zn-bio-MOF-1 derived CoS/ZnS composites modified electrochemical sensor for chloroneb detection by differential pulse voltammetry

For the first time CoS-nanoparticles attached ZnS rods (CoS/ZnS composites) have been synthesized using cobalt(II)-ion-exchanged zinc-based biological metal-organic framework-1 (Zn-bio-MOF-1) as precursors by a solvothermal method. Among them, the cobalt(II)-ion-exchanged Zn-bio-MOF-1 was obtained by exchanging the dimethylammonium cations (Me₂NH₂⁺) of Zn-bio-MOF-1 with cobalt ions. A novel electrochemical sensor based on CoS/ZnS composites and molecularly imprinted polymers (MIPs) was proposed for rapid, sensitive, and highly selective detection of organochlorine pesticide chloroneb. The MIP film was obtained by cyclic voltammetry (CV), and differential pulse voltammetry (DPV) was used to detect chloroneb. Under the optimal conditions, the oxidation peak current density of chloroneb was linearly related to the concentration from 0.003 to 0.2 μM and 0.2 to 3.2 μM with a detection limit of 0.87 nM (S/N = 3) and a sensitivity of 52.27 μA·μM^-1·cm^-2. The proposed sensor exhibits a favorable selectivity, stability, and reproducibility, and was applied to detect chloroneb residues in licorice, cucumber, river water, and soil samples with satisfactory results.Graphical abstract.

Carbon Nanomaterials Embedded in Conductive Polymers: A State of the Art

Carbon nanomaterials are at the forefront of the newest technologies of the third millennium, and together with conductive polymers, represent a vast area of indispensable knowledge for developing the devices of tomorrow. This review focusses on the most recent advances in the field of conductive nanotechnology, which combines the properties of carbon nanomaterials with conjugated polymers. Hybrid materials resulting from the embedding of carbon nanotubes, carbon dots and graphene derivatives are taken into consideration and fully explored, with discussion of the most recent literature. An introduction into the three most widely used conductive polymers and a final section about the most recent biological results obtained using carbon nanotube hybrids will complete this overview of these innovative and beyond belief materials.

Directly assembled electrochemical sensor by combining self-supported CoN nanoarray platform grown on carbon cloth with molecularly imprinted polymers for the detection of Tylosin

Molecularly imprinted polymers (MIPs) based on electrochemical sensors (MIP-EC sensors) have obtained ideal achievements in recent years. However, some challenges are still need to be addressed, such as adjustable preparation, unstable sensing interface and great signal-to-noise ratio. Here, based on the ingenious combination of the MIP and the self-supported CoN nanowire arrays grown on carbon cloth (CoN NWs/CC), a robust MIP-EC sensor was developed, in which the MIP film was uniformly coated on the CoN NWs/CC via a bulk polymerization crosslinking process. Especially, CoN NWs/CC were prepared via in-situ transformation of their oxide precursors and then directly as a candidate of EC electrode. Under the optimal conditions, the MIP-EC sensor can detect Tylosin (TS) in the concentration range from 8.6 × 10^-11 to 6.7 × 10^-5 mol L^-1, and the low detection limit (LOD) is 5.5 × 10^-12 mol L^-1 (S/N = 3). Furthermore, the MIP-EC sensor showed high selectivity, reproducibility and stability. The practicability of the MIP-EC sensor was tested in the actual samples of surface water and soil with the comparison of the traditional ELISA method. The developed MIP-EC sensor with simple and fabrication process can provide a versatile and reliable method, which has great potential application value for the detection of small hazardous molecules.

Advancements of chiral molecularly imprinted polymers in separation and sensor fields: A review of the last decade

Since chiral recognition mechanism based on molecularly imprinted polymers immerged, it has assisted countless chemical and electrochemical analytical sample preparation techniques. It has done this by enhancing the enatioseparation abilities of these techniques. The preparation and optimization of chiral molecularly imprinted polymers (CMIPs) are two favored methods in the separation and sensor fields. This review aims to present an overview of advances in the preparation and application of CMIPs in analytical approaches in different available formats (eg. column, monolithic column, cartridge, membrane, nanomaterials, pipette tip and stir bar sorptive) over the last decade. In addition, progress in the preparation and development of CMIPs-based sensor fields have been also discussed. Finally, the main application challenges of CMIPs are also summarily explained, as well as upcoming prospects in the field.

Fabrication of poly-sulfosalicylic acid film decorated pure carbon fiber as electrochemical sensing platform for detection of theophylline

In this work, we integrated the superiority of good conductivity, large surface area of carbon fibers and the catalytic property, good biocompatibility of polymer sulfosalicylic acid to construct a novel electrochemical sensor to detect theophylline in drug analysis. The morphology of nanocomposite was characterized by scanning electron microscopy (SEM). The polymerization between monomers was observed by Fourier transform infrared spectroscopy (FTIR). The composite between carbon material and polymer was verified by Raman spectrum. Under the optimal experimental conditions, the concentration of theophylline (0.6∼137 μM) and the peak current value revealed a good linear relationship and the limit of detection as low as 0.2 μM. In addition, the proposed sensor exhibits repeatability, stability and ease of selectivity.

Controlling the morphology of metal–organic frameworks and porous carbon materials: metal oxides as primary architecture-directing agents

We give a comprehensive overview of how the morphology control is an effective and versatile way to control the physicochemical properties of metal oxides that can be transferred to metal–organic frameworks and porous carbon materials.

Nanotechnology and nanomaterial-based no-wash electrochemical biosensors: from design to application

Nanotechnology and nanomaterial based electrochemical biosensors (ECBs) have achieved great development in many fields, such as clinical diagnosis, food analysis, and environmental monitoring. Nowadays, the single-handed pursuit of sensitivity and accuracy cannot meet the demands of detection in many in situ and point-of-care (POC) circumstances. More and more attention has been focused on simplifying the operation procedure and reducing detection time, and thus no-wash assay has become one of the most effective ways for the continuous development of ECBs. However, there are many challenges to realize no-wash detection in the real analysis, such as redox interferences, multiple impurities, non-conducting protein macromolecules, etc. Furthermore, the complex detection circumstance in different application fields makes the realization of no-wash ECBs more complicated and difficult. Thanks to the updated nanotechnology and nanomaterials, in-depth analysis of the obstacles in the detection process and various methods for fabricating no-wash ECBs, most issues have been largely resolved. In this review, we have systematically analyzed the nanomaterial based design strategy of the state-of-the-art no-wash ECBs in the past few years. Following that, we summarized the challenges in the detection process of no-wash ECBs and their applications in different fields. Finally, based on the summary and analysis in this review, we also evaluated and discussed future prospects from the design to the application of ECBs.

A novel molecularly imprinted electrochemical sensor based on double sensitization by MOF/CNTs and Prussian blue for detection of 17β-estradiol

In this paper, we constructed MIL-53 (AlOHbdc, bdc = benzene-1,4-dicarboxylate) /CNTs and Prussian blue (PB) as the double sensitization material of the sensing platform, in which the MIL-53/CNTs hybrid can not only increase the specific surface area but also increase the conductivity of the sensor and PB can play a role in amplifying electrical signals and accelerating electron transmission. Pyrrole was used as monomer and E2 was used as template for electropolymerization to form conductive film. Moreover, the overoxidation/dedoping elution method were used to simplify the experimental process. Under optimal conditions, the MIECS exhibited an excellent sensitivity and high selectivity with a wide linear response range between 10^-14 to 10^-9 mol L^-1 and an estimated detection limit of 6.19 × 10^-15 mol L^-1.

Efficient enantiorecognition of amino acids under a stimuli-responsive system: synthesis, characterization and application of electroactive rotaxane

An electroactive chiral rotaxane, consisting of a polymeric chiral ionic liquid as the flexible axle and 18-crown-6 as the wheel, is synthesized for efficient enantiorecognition of amino acids.