Electrochemical chiral interface based on the Michael addition/Schiff base reaction of polydopamine functionalized reduced graphene oxide

Synthesis of chiral graphene structures and their comprehensive applications: a critical review

From a molecular viewpoint, chirality is a crucial factor in biological processes. Enantiomers of a molecule have identical chemical and physical properties, but chiral molecules found in species exist in one enantiomer form throughout life, growth, and evolution. Chiral graphene materials have considerable potential for application in various domains because of their unique structural framework, properties, and controlled synthesis, including chiral creation, segregation, and transmission. This review article provides an in-depth analysis of the synthesis of chiral graphene materials reported over the past decade, including chiral nanoribbons, chiral tunneling, chiral dichroism, chiral recognition, and chiral transfer. The second segment focuses on the diverse applications of chiral graphene in biological engineering, electrochemical sensors, and photodetectors. Finally, we discuss research challenges and potential future uses, along with probable outcomes.

Spacer arm of ionic liquids facilitated laccase immobilization on magnetic graphene enhancing its stability and catalytic performance

To fulfill the requirements of environmental protection, a magnetically recoverable immobilized laccase has been developed for water pollutant treatment. In order to accomplish this objective, we propose a polydopamine-coated magnetic graphene material that addresses the challenges associated with accumulation caused by electrostatic interactions between graphene and enzyme molecules, which can lead to protein denaturation and inactivation. To achieve this, we present a polydopamine-coated magnetic graphene material that binds to the enzyme molecule through flexible spacer arms formed by ionic liquids. The immobilized laccase exhibited a good protective effect on laccase and showed a high stability and recycling ability. Laccase-ILs-PDA-MGO has a wider pH and temperature range and retains about 80% of its initial activity even after incubation at 50 °C for 2 h, which is 2.2 times more active than free laccase. Furthermore, the laccase-ILs-PDA-MGO exhibited a remarkable removal efficiency of 97.0% and 83.9% toward 2,4-DCP and BPA within 12 h at room temperature. More importantly, laccase-ILs-PDA-MGO can be recovered from the effluent and used multiple times for organic pollutant removal, while maintaining a relative removal efficiency of 80.6% for 2,4-DCP and 81.4% for BPA after undergoing seven cycles. In this study, a strategy for laccase immobilization by utilizing ILs spacer arms to modify GO aims to provide valuable insights into the advancement of efficient enzyme immobilization techniques and the practical application of immobilized enzymes in wastewater treatment.

Comparative performance analysis of mussel-inspired polydopamine, polynorepinephrine, and poly-α-methyl norepinephrine in electrochemical biosensors

Polydopamine (PDA) has garnered significant interest for applications in biosensors, drug delivery, and tissue engineering. However, similar polycatecholamines like polynorepinephrine (PNE) with additional hydroxyl groups and poly-α-methylnorepinephrine (PAMN) with additional hydroxyl and methyl groups remain unexplored in the biosensing domain. This research introduces three innovative biosensing platforms composed of ternary nanocomposite based on reduced graphene oxide (RGO), gold nanoparticles (Au NPs), and three sister polycatecholamine compounds (PDA, PNE, and PAMN). The study compares and evaluates the performance of the three biosensing systems for the ultrasensitive detection of Mycobacterium tuberculosis (MTB). The formation of the nanocomposites was meticulously examined through UV-Visible, Raman, XRD, and FT-IR studies with FE-SEM and HR-TEM analysis. Cyclic voltammetry and differential pulse voltammetry measurements were also performed to determine the electrochemical characteristics of the modified electrodes. Electrochemical biosensing experiments reveal that the RGO-PDA-Au, RGO-PNE-Au, and RGO-PAMN-Au-based biosensors detected target DNA up to a broad detection range of 0.1 × 10-8 to 0.1 × 10-18 M, with a low detection limit (LOD) of 0.1 × 10-18, 0.1 × 10-16, and 0.1 × 10-17 M, respectively. The bioelectrodes were proved to be highly selective with excellent sensitivities of 3.62 × 10-4 mA M-1 (PDA), 7.08 × 10-4 mA M-1 (PNE), and 6.03 × 10-4 mA M-1 (PAMN). This study pioneers the exploration of two novel mussel-inspired polycatecholamines in biosensors, opening avenues for functional nanocoatings that could drive further advancements in this field.

Covalent functionalization of 1D and 2D sp2-carbon nanoallotropes - twelve years of progress (2011-2023)

Carbon nanoallotropes have attracted significant attention in the field of materials science due to their unique combination of physicochemical and biological properties, with numerous applications. One-dimensional (1D) and two-dimensional (2D) sp2-carbon nanoallotropes, such as carbon nanohorns (CNHs), carbon nanotubes (CNTs), and graphene, have emerged as prominent candidates for a variety of technological advancements. To fully exploit their exceptional characteristics, the covalent functionalization of these nanostructures may alleviate the problems with the processing and final performance. This route of the carbon nanoallotrope functionalization is based on a covalent attachment of functional groups or molecules (via linkers of various strengths) to their surfaces, enabling precise control over physical, chemical, biological, and electronic properties. Such an approach opens up new avenues for tailoring the nanoallotrope characteristics, such as solubility/dispersibility, reactivity, and interactions with other materials. Over more than the last decade, significant progress has been made in the covalent functionalization of both 1D and 2D sp2-carbon nanoallotropes, paving the way for diverse applications in the nanoelectronics, energy storage, sensing, and biomedical fields. In this comprehensive review, we provide state-of-the-art advancements and achievements in the covalent functionalization of 1D and 2D sp2-carbon nanoallotropes during the past dozen years. We aim to highlight the key strategies, methodologies, and breakthroughs that have significantly contributed to this field. Eventually, we discuss the implications of those advancements and explore the opportunities for future research and applications.

Establishment of Polydopamine-Modified HK-2 Cell Membrane Chromatography and Screening of Active Components from Plantago asiatica L

Cell membrane chromatography (CMC) has been widely recognized as a highly efficient technique for in vitro screening of active compounds. Nevertheless, conventional CMC approaches suffer from a restricted repertoire of cell membrane proteins, making them susceptible to oversaturation. Moreover, the binding mechanism between silica gel and proteins primarily relies on intermolecular hydrogen bonding, which is inherently unstable and somewhat hampers the advancement of CMC. Consequently, this investigation aimed to establish a novel CMC column that could augment protein loading, enhance detection throughput, and bolster binding affinity through the introduction of covalent bonding with proteins. This study utilizes polydopamine (PDA)-coated silica gel, which is formed through the self-polymerization of dopamine (DA), as the carrier for the CMC column filler. The objective is to construct the HK-2/SiO2-PDA/CMC model to screen potential therapeutic drugs for gout. To compare the quantity and characteristics of Human Kidney-2 (HK-2) cell membrane proteins immobilized on SiO2-PDA and silica gel, the proteins were immobilized on both surfaces. The results indicate that SiO2-PDA has a notably greater affinity for membrane proteins compared to silica gel, resulting in a significant improvement in detection efficiency. Furthermore, a screening method utilizing HK-2/SiO2-PDA/CMC was utilized to identify seven potential anti-gout compounds derived from Plantago asiatica L. (PAL). The effectiveness of these compounds was further validated using an in vitro cell model of uric acid (UA) reabsorption. In conclusion, this study successfully developed and implemented a novel CMC filler, which has practical implications in the field.

Fabrication of Dual-Functional Bacterial-Cellulose-Based Composite Anion Exchange Membranes with High Dimensional Stability and Ionic Conductivity

Anion exchange membranes (AEMs) are increasingly becoming a popular research area due to their ability to function with nonprecious metals in electrochemical devices. Nevertheless, there is a challenge to simultaneously optimize the dimensional stability and ionic conductivity of AEMs due to the "trade-off" effect. Herein, we adopted a novel strategy of combining filling and cross-linking using functionalized bacterial cellulose (PBC) as a dual-functional porous support and brominated poly(phenylene oxide) (Br-PPO) as the cross-linking agent and filler. The PBC nanofiber framework together with cross-linking can provide a reliable mechanical support for the subsequent filled polymer, thus improving the mechanical properties and effectively limiting the size change of the final quaternized-PPO (QPPO)-filled PBC composite membrane. The composite membrane showed a very low swelling ratio of only 10.35%, even at a high water uptake (81.83% at 20 °C). Moreover, the existence of multiple -NR3+ groups in the cross-link bonds between BC and Br-PPO can provide extra OH- ion transport sites, contributing to the increase in ionic conductivity. The final membrane demonstrated a hydroxide ion conductivity of 62.58 mS cm-1, which was remarkably higher than that of the pure QPPO membrane by up to 235.93% (80 °C). The successful preparation of the PBC3/QPPO membrane provides an effective avenue to tackle the trade-off effect through a dual-functional strategy.

Effectively Reinforced α-Bi2O3 MPs/PDA-RGO Sensor for Selective Modality Sensing of a Hazardous Phenolic Compound

The phenolic compound trichlorophenol (TCP) is an ingredient in fungicides and herbicides. This compound's high stability, bioaccumulation, toxicity, and poor biodegradability result in severe environmental and biological health issues. Consequently, it is crucial to have an affordable and sensitive method for detecting TCP in environmental samples. In this study, α-phase bismuth oxide microplates and polydopamine-functionalized reduced graphene oxide (α-Bi2O3 MPs/PDA-RGO) were synthesized using a simple ultrasonic method and characterized with various analytical and physical characterizations. The conversion of the catechol moieties present in the resulting PDA-RGO material into quinones facilitates productive interactions with diverse functional groups, such as hydroxyl, amine, and imine. Consequently, the compounds 2,4,6-trichlorophenol (TCP) engages in electrochemical interactions with the aforementioned functional groups. As a result, TCP shows more excellent selectivity on the designed α-Bi2O3 MPs/PDA-RGO/SPCE sensor. Under the optimized conditions, the sensor demonstrated a lower detection limit (0.0042 μM), a limit of quantification (0.0078 μM), good sensitivity (2.24 μA μM-1 cm2), a wide linear range (0.019-190.7 and 212.7-1649 μM), and pinpoint specificity. The efficacy of the sensor is additionally validated through the accurate identification of TCP residues in water, soil, and food samples.

Chiral Materials: Progress, Applications, and Prospects

Chirality is a universal phenomenon in molecular and biological systems, denoting an asymmetric configurational property where an object cannot be superimposed onto its mirror image by any kind of translation or rotation, which is ubiquitous on the scale from neutrinos to spiral galaxies. Chirality plays a very important role in the life system. Many biological molecules in the life body show chirality, such as the "codebook" of the earth's biological diversity-DNA, nucleic acid, etc. Intriguingly, living organisms hierarchically consist of homochiral building blocks, for example, l-amino acids and d-sugars with unknown reason. When molecules with chirality interact with these chiral factors, only one conformation favors the positive development of life, that is, the chiral host environment can only selectively interact with chiral molecules of one of the conformations. The differences in chiral interactions are often manifested by chiral recognition, mutual matching, and interactions with chiral molecules, which means that the stereoselectivity of chiral molecules can produce changes in pharmacodynamics and pathology. Here, the latest investigations are summarized including the construction and applications of chiral materials based on natural small molecules as chiral source, natural biomacromolecules as chiral sources, and the material synthesized by design as a chiral source.

Design and Electrochemical Chiral Sensing of the Robust Sandwich Chiral Composite d-His-ZIF-8@Au@ZIF-8

In the pursuit of chiral materials with significant chiral recognition effects and stability, various strategies have been explored, among which the integration of metal nanoparticles and chiral metal-organic frameworks (CMOFs) is highly promising. However, metal nanoparticles (MNPs)/CMOFs show high chiral properties but inferior stabilities due to the MNPs being easily detached from the outside layer under certain conditions. Sandwich MOFs@MNPs@CMOF chiral materials can overcome this dilemma because the sandwich structure can maximize the regulation of the chiral interface activity, while the controlled outer layer can stop the MNPs from falling off in the procedure of chiral recognition. Here, a novel sandwich chiral material (d-His-ZIF-8@Au@ZIF-8) was synthesized by a ligand-assisted strategy with a well-defined sandwich morphology and chiral recognition capabilities. The electrochemical chiral recognition showed that d-His-ZIF-8@Au@ZIF-8 was the most efficient for the enantiomer of phenylalanine (Phe). This experiment presents a novel perspective for the fabrication of a chiral electrochemical sensing platform based on a solid sandwich chiral nanocomposite.

Genetically engineered bacterium-modified magnetic particles assisted chiral recognition and colorimetric determination of D/L-tryptophan in millets

Chiral recognition of enantiomers has always been a thorny issue since they exhibit the same properties under an achiral environment. Herein, polydopamine-functionalized magnetic particles (MP@PDA) were synthesized to immobilize the genetically engineered bacterium Escherichia coli DH5α (MP@PDA-E. coli). L-tryptophan (Trp) instead of D-Trp can be stereo-specifically degraded by tryptophanase in E. coli. The degradation product indole reacts with 4-dimethylaminobenzaldehyde to generate a rose-red adduct. Thus, MP@PDA-E. coli was employed to fabricate a chiral colorimetric method for chiral recognition and determination of L-Trp. The method averts the purification of tryptophanase. More importantly, tryptophanase demonstrates excellent enantioselective ability for L-Trp. The method can not only quantitatively detect L-Trp but also realize the measurement of the enantiomer percentage in the enantiomeric mixture. The feasibility was verified by detecting L-Trp in millet samples from different origins. Furthermore, a portable device was fabricated to make the method more convenient.

Mussel - Inspired biosorbent combined with graphene oxide for removal of organic pollutants from aqueous solutions

In this work, we develop a mussel-inspired biosorbent combined with graphene oxide for removal of organic dyes in water sources. The composite was prepared via self-polymerization of dopamine in weak alkaline solution containing graphene oxide at ambient condition. Morphological and structural studies revealed that polydopamine has gradually grown to cover the surface of graphene oxide flakes, partially reduced these flakes, and somehow form many grains (size around 20 nm) on the flakes instead of making very large aggregates as usual. The mass ratio between two components of the composite was also investigated to find the optimal one which provides enough surface area (20 m².g^-1) and maintain adhesive sites in order to ensure high-efficiency removal of organic molecules. The adsorption kinetics and isotherms of as-prepared adsorbent towards methylene blue were found to fit well with pseudo-first order kinetics model and Langmuir isotherm. The maximum adsorption capacity (q_m) and Langmuir constant (k_L) were estimated to be 270 mg.g^-1 and 0.49 L. mg^-1. The as-prepared bio-sorbent is very promising for remediation of water sources contaminated with cationic organic molecules and heavy metal ions.

Aptamer and Peptide-Engineered Polydopamine Nanospheres for Target Delivery and Tumor Perfusion in Synergistic Chemo-Phototherapy of Pancreatic Cancer

Pancreatic cancer (PC) is the fourth leading cause of cancer death, and the 5 year survival rate is only 4%. Chemotherapy is the treatment option for the majority of PC patients diagnosed at an advanced stage, whereas the desmoplastic stroma of PC could block the perfusion of chemotherapeutic agents to tumor tissues and contribute generally to chemoresistance. Therefore, the clinical status of PC calls for an urgent exploration in the effective treatment strategy. Chemo-phototherapy is an emerging modality against malignant tumors, but owing to the low targeting ability of theranostic agents or unspecific accumulation in the tumor region, majority of chemo-phototherapy techniques have disappointing therapeutic efficiencies. Herein, we have explored CD71-specific targeting aptamers and paclitaxel (PTX)-modified polydopamine (PDA) nanospheres with the conjugation of peptidomimetic AV3 (termed Apt-PDA@PTX/AV3 bioconjugates) to specifically target and combat PC in vivo by synergistic chemo-phototherapy. After the delivery of nanotheranostic agents to the tumor microenvironment (TME) or subsequent endocytic uptake by PC cells, a simultaneous release of AV3 and PTX from Apt-PDA@PTX/AV3 bioconjugates via near-infrared (NIR) irradiation can decrease desmoplastic stroma to enhance tumor perfusion and tumor-killing effects. Meanwhile, PDA cores utilize NIR laser to create unendurable hyperthermia within TME to "cook" tumors. Taken together, the current study finally suggests that our Apt-PDA@PTX/AV3 bioconjugates could act as a novel therapeutic approach by synergistic chemo-phototherapy for the programmable inhibition of PC.

Electrochemical determination of benomyl using MWCNTs interspersed graphdiyne as enhanced electrocatalyst

Graphdiyne (GDY) has attracted a lot of interest in electrochemical sensing application with the advantages of a large conjugation system, porous structure, and high structure defects. Herein, to further improve the sensing effect of GDY, conductive MWCNTs were chosen as the signal accelerator. To get a stable composite material, polydopamine (PDA) was employed as connecting bridge between GDY and MWCNTs-NH₂, where DA was firstly polymerized onto GDY, followed by covalently linking MWCNTs-NH₂ with PDA through Michael-type reaction. The formed GDY@PDA/MWCNTs-NH₂ composite was then explored as an electrochemical sensor for benomyl (Ben) determination. GDY assists the adsorption and accumulation of Ben molecules to the sensing surface, while MWCNTs-NH₂ can enhance the electrical conductivity and electrocatalytic activity, all of which contributing to the significantly improved performance. The proposed sensor displays an obvious oxidation peak at 0.72 V (vs. Hg|Hg₂Cl₂) and reveals a wide linear range from 0.007 to 10.0 µM and a low limit of detection (LOD) of 1.8 nM (S/N = 3) toward Ben detection. In addition, the sensor shows high stability, repeatability, reproducibility, and selectivity. The feasibility of this sensor was demonstrated by detecting Ben in apple and cucumber samples with a recovery of 94-106% and relative standard deviations (RSDs) less than 2.3% (n = 5). A sensitive electrochemical sensing platform was reported for benomyl (Ben) determination based on a highly stable GDY@PDA/MWCNTs-NH₂ composite.

Synergistic effect of polymer functionalized graphene oxide system for breast cancer treatment

The multifaceted drug carrier system is an emerging trend in delivering chemotherapeutic drugs and photosensitizers for the synergistic effect. In this work, we have designed a functionalized graphene oxide (GO) based carrier system for combined chemo-photodynamic therapeutic effects. Doxorubicin (DOX) and rose bengal (RB) were entrapped on the surface of GO via hydrophobic and π-π stacking interactions. The functional group determination, crystalline properties, surface morphology, and hydrodynamic size were evaluated using FT-IR, XRD, SEM, TEM, AFM, and DLS analysis. At 24 h, the entrapment efficiency was 65 % DOX and 40.92 % RB, and the loading capacities were 16.9 % DOX and 5.68 % RB observed at 30 min. The drug release percentage was higher in pH-2.6 rather than in pH-5.5, 6.8, and 7.4 pH environments. The in-vitro toxicity analysis using the LDH assay reveals that the DOX and RB co-loaded carriers had a significant cytotoxic effect on MCF-7 cells, indicating that the carrier could improve the therapeutic efficacy of DOX. Morphological changes were studied using inverted light microscopy; the cells were irradiated with a laser 525 nm 10 J/cm² for 2 min 51 sec, and it was observed that the DOX and RB co-loaded carrier with laser-irradiated cells exposed the high-level morphological changes with the occurrence of apoptotic cell death. Compared to free DOX, the DOX/RB co-loaded carrier + laser had an efficient anticancer activity, as confirmed by DAPI staining cell uptake, flow cytometry, and intracellular ROS generation analysis. The DOX and RB co-loaded carrier clearly exhibits the RB-mediated photodynamic action on MCF-7 cells in response to external laser light irradiation. It permits an on-demand dual-payload release to trigger an instantaneous photodynamic and chemo treatment for cancer cell eradication. Finally, the ensuing dual-agent release is probable to successfully fight cancer via a synergistic effect.

Chiral recognition of tryptophan enantiomer based on the electrode modified by polyaniline adsorption bovine serum albumin complex

A chiral sensing platform was constructed via adsorptive functionalization of ammonium persulfate doped polyaniline (APS-DPANI) with bovine serum albumin (BSA). The novelty of this work is the construction of such chiral interface with adsorption principle. The material has been characterized by scanning electron microscope, Fourier transform infrared and X-ray photoelectron spectroscopy, and thermogravimetric and water contact angle analyses. It displayed considerable stability in multi-run cyclic voltammetric scanning. Moreover, the superior conductivity of APS-DPANI and the decent binding ability of BSA endowed this sensing platform with an excellent recognition effect for tryptophan (Trp) enantiomers in the differential pulse voltammetry (DPV) test. The recognition was highly reproducible, and the detection limits for L- and D-isomer were 0.071 and 0.0478 mM, respectively.

The fabrication of a highly electroactive chiral-interface self-assembled Cu(ii)-coordinated binary-polysaccharide composite for the differential pulse voltammetry (DPV) detection of tryptophan isomers

It is of significance to fabricate excellently performing chiral carbon nanocomposites for chiral electrochemical detection applications.

Recent advances of the ionic chiral selectors for chiral resolution by chromatography, spectroscopy and electrochemistry

Ionic chiral selectors have been received much attention in the field of asymmetric catalysis, chiral recognition, and preparative separation. It has been shown that the addition of ionic chiral selectors can enhance the recognition efficiency dramatically due to the presence of multiple intermolecular interactions, including hydrogen bond, π-π interaction, van der Waals force, electrostatic ion-pairing interaction, and ionic-hydrogen bond. In the initial research stage of the ionic chiral selectors, most of work center on the application in chromatographic separation (capillary electrophoresis, high-performance liquid chromatography, and gas chromatography). Differently, more and more attention has been paid on the spectroscopy (nuclear magnetic resonance, fluorescence, ultraviolet and visible absorption spectrum, and circular dichroism spectrum) and electrochemistry in recent years. In this tutorial review as regards the ionic chiral selectors, we discuss in detail the structural features, properties, and their application in chromatography, spectroscopy, and electrochemistry.

Chiral Graphene Hybrid Materials: Structures, Properties, and Chiral Applications

Chirality has become an important research subject. The research areas associated with chirality are under substantial development. Meanwhile, graphene is a rapidly growing star material and has hard-wired into diverse disciplines. Rational combination of graphene and chirality undoubtedly creates unprecedented functional materials and may also lead to great findings. This hypothesis has been clearly justified by the sizable number of studies. Unfortunately, there has not been any previous review paper summarizing the scattered studies and advancements on this topic so far. This overview paper attempts to review the progress made in chiral materials developed from graphene and their derivatives, with the hope of providing a systemic knowledge about the construction of chiral graphenes and chiral applications thereof. Recently emerging directions, existing challenges, and future perspectives are also presented. It is hoped this paper will arouse more interest and promote further faster progress in these significant research areas.

Recent Advances in a Polydopamine-Mediated Antimicrobial Adhesion System

The drug resistance developed by bacteria during antibiotic treatment has been a call to action for researchers and scientists across the globe, as bacteria and fungi develop ever increasing resistance to current drugs. Innovative antimicrobial/antibacterial materials and coatings to combat such infections have become a priority, as many infections are caused by indwelling implants (e.g., catheters) as well as improving postsurgical function and outcomes. Pathogenic microorganisms that can exist either in planktonic form or as biofilms in water-carrying pipelines are one of the sources responsible for causing water-borne infections. To combat this, researchers have developed nanotextured surfaces with bactericidal properties mirroring the topographical features of some natural antibacterial materials. Protein-based adhesives, secreted by marine mussels, contain a catecholic amino acid, 3,4-dihydroxyphenylalanine (DOPA), which, in the presence of lysine amino acid, empowers with the ability to anchor them to various surfaces in both wet and saline habitats. Inspired by these features, a novel coating material derived from a catechol derivative, dopamine, known as polydopamine (PDA), has been designed and developed with the ability to adhere to almost all kinds of substrates. Looking at the immense potential of PDA, this review article offers an overview of the recent growth in the field of PDA and its derivatives, especially focusing the promising applications as antibacterial nanocoatings and discussing various antimicrobial mechanisms including reactive oxygen species-mediated antimicrobial properties.

Bio-inspired deposition of electrochemically exfoliated graphene layers for electrical resistance heating applications

Electrochemically exfoliated graphene (eeG) layers possess a variety of potential applications, e.g. as susceptor material for contactless induction heating in dynamic electro-magnetic fields, and as flexible and transparent electrode or resistivity heating elements. Spray coating of eeG dispersions was investigated in detail as a simple and fast method to deposit both, thin conducting layers and ring structures on polycarbonate substrates. The spray coating process was examined by systematic variation of dispersion concentration and volume applied to heated substrates. Properties of the obtained layers were characterized by UV-VIS spectroscopy, SEM and Confocal Scanning Microscopy. Electrical conductivity of eeG ring structures was measured using micro-four-point measurements. Modification of eeG with poly(dopamine) and post-thermal treatment yields in the reduction of the oxidized graphene proportion, an increase in electrical conductivity, and mechanical stabilization of the deposited thin layers. The chemical composition of modified eeG layer was analyzed via x-ray photoelectron spectroscopy pointing to the reductive behavior of poly(dopamine). Application oriented experiments demonstrate the direct electric current heating (Joule-Heating) effect of spray-coated eeG layers.

Immobilization of 6-O-α-maltosyl-β-cyclodextrin on the surface of black phosphorus nanosheets for selective chiral recognition of tyrosine enantiomers

A novel chiral sensing platform, 6-O-α-maltosyl-β-cyclodextrin (Mal-βCD)-based film, is proposed for selective electrochemical recognition of tyrosine (Tyr) enantiomers. Black phosphorus nanosheets (BP NSs) and Mal-βCD modified glassy carbon electrode (Mal-βCD/BP NSs/GCE) were prepared by a layer-to-layer drop-casting method, and the platform was easy to fabricate and facile to operate. It is proposed that the amino and hydroxyl groups of the Tyr enantiomers and the chiral hydroxyl groups of Mal-βCD selectively form intermolecular hydrogen bonds to dominate effective chiral recognition. Two linear equations of Ip (μA) = 11.40 C_L-Tyr (mM) + 0.28 (R² = 0.99147) and Ip (μA) = 7.96 C_D-Tyr (mM) + 0.22 (R² = 0.99583) in the concentration range 0.01-1.00 mM have been obtained. The limits of detection (S/N=3) for L-Tyr and D-Tyr were 4.81 and 6.89 µM, respectively. An interesting phenomenon was that the value of I_L-Tyr/I_D-Tyr (1.51) in this work was slightly higher than the value of I_L-Trp/I_D-Trp (1.49) reported in our previous study, where tryptophan (Trp) enantiomers were electrochemically recognized by Nafion (NF)-stabilized BPNSs-G2-β-CD composite. The two similar sensors fabricated by different methods showed different recognition ability toward either Tyr or Trp enantiomers, and the underlying mechanism was discussed in detail. More importantly, the proposed chiral sensor enables prediction of the percentages of D-Tyr in racemic Tyr mixtures. The chiral sensor may provide a novel approach for the fabrication of novel chiral platforms in the practical detection of L- or D-enantiomer in racemic Tyr mixtures.Graphical abstract.