MOF-derived Co3O4 nanosheets rich in oxygen vacancies for efficient all-solid-state symmetric supercapacitors

Topotactic transformation of zeolitic imidazolate frameworks into high-performance battery type electrodes for supercapattery application

Supercapacitors (SCs) are well recognized for their excessive power output and cycling stability, but they often suffer from limited energy density. A promising solution to this challenge is the hybrid supercapattery (HSC) concept, which integrates two different electrodes with disparate charge-storage systems to provide energy and power. In this work, transition-metal phosphides (TMPs), specifically a Cu-doped cobalt phosphide wrapped with an N-doped porous carbon network (CCP-NPC), were used as positive electrode materials in HSCs. With a specific capacitance of 5.99 F cm-2 and a capacitance retention of 87% after 10 000 cycles, the extremely active CCP-5-NPC (5% Cu-doped cobalt phosphide wrapped with an N-doped porous carbon network) exhibits numerous redox sites. The unique structure of CCP-5-NPC, characterized by its cubical shape, coarse surface, and porous structure, greatly enhances the electrochemically active sites (EAS) and specific surface areas (SSA) of the electrode material, facilitating efficient charge transfer kinetics for ions and electrons in HSCs. The potential hybrid supercapattery (CCP-5-NPC||r-GO device) also demonstrated a higher energy density of 0.563 mW h cm-2 at a power density of 4.8 mW cm-2 at 3 mA cm-2 and a cyclic stability of 87.7% after 10 000 cycles. This work provides a basis for the development of highly efficient HSCs in the future by topotactically converting extremely porous materials into energy storage devices.

M-Doped (M = Zn, Mn, Ni) Co-MOF-Derived Transition Metal Oxide Nanosheets on Carbon Fibers for Energy Storage Applications

Carbon fiber, with its strong mechanical properties and electrical conductivity, is ideal as a fiber electrode in wearable or structural energy storage devices. However, its energy storage capacity is limited, and coatings like transition metal oxides (TMOs) enhance its electrochemical performance. Metal-organic frameworks (MOFs) are commonly used to grow TMOs on carbon fibers, increasing the surface area for better energy storage. Despite this, TMOs have limited electrical conductivity, so ion exchange is often used to dope them with additional cations, improving both conductivity and energy storage capacity. This study compares different ion-exchange cations in ZIF-L-derived TMO coatings on carbon fiber. Testing both supercapacitor and Li-ion battery applications, Ni-doped samples showed superior results, attributed to their higher exchange ratio with cobalt. As a supercapacitor electrode, the Ni-doped material achieved 13.3 F/g at 50 mA/g-66% higher than undoped samples. For Li-ion battery anodes, it reached a specific capacity of 410.5 mAh/g at 25 mA/g, outperforming undoped samples by 21.4%.

Unveiling the scope and perspectives of MOF-derived materials for cutting-edge applications

Although synthesis and design of MOFs are crucial factors to the successful implementation of targeted applications, there is still lack of knowledge among researchers about the synthesis of MOFs and their derived composites for practical applications. For example, many researchers manipulate study results, and it has become quite difficult to quit this habit specifically among the young researchers Undoubtedly, MOFs have become an excellent class of compounds but there are many challenges associated with their improvement to attain diverse applications. It has been noted that MOF-derived materials have gained considerable interest owing to their unique chemical properties. These compounds have exhibited excellent potential in various sectors such as energy, catalysis, sensing and environmental applications. It is worth mentioning that most of the researchers rely on commercially available MOFs for use as precursor supports, but it is an unethical and wrong practice because it prevents the exploration of the hidden diversity of similar materials. The reported studies have significant gaps and flaws, they do not have enough details about the exact parameters used for the synthesis of MOFs and their derived materials. For example, many young researchers claim that MOF-based materials cannot be synthesized as per the reported instructions for large-scale implementation. In this regard, current article provides a comprehensive review of the most recent advancements in the design of MOF-derived materials. The methodologies and applications have been evaluated together with their advantages and drawbacks. Additionally, this review suggests important precautions and solutions to overcome the drawbacks associated with their preparation. Applications of MOF-derived materials in the fields of energy, catalysis, sensing and environment have been discussed. No doubt, these materials have become excellent class but there are still many challenges ahead to specify it for the targeted applications.

Nanostructured Transition Metal Oxides on Carbon Fibers for Supercapacitor and Li-Ion Battery Electrodes: An Overview

Nowadays, owing to the new technological and industrial requirements for equipment, such as flexibility or multifunctionally, the development of all-solid-state supercapacitors and Li-ion batteries has become a goal for researchers. For these purposes, the composite material approach has been widely proposed due to the promising features of woven carbon fiber as a substrate material for this type of material. Carbon fiber displays excellent mechanical properties, flexibility, and high electrical conductivity, allowing it to act as a substrate and a collector at the same time. However, carbon fiber's energy-storage capability is limited. Several coatings have been proposed for this, with nanostructured transition metal oxides being one of the most popular due to their high theoretical capacity and surface area. In this overview, the main techniques used to achieve these coatings-such as solvothermal synthesis, MOF-derived obtention, and electrochemical deposition-are summarized, as well as the main strategies for alleviating the low electrical conductivity of transition metal oxides, which is the main drawback of these materials.

Advances in 2D Materials Based Gas Sensors for Industrial Machine Olfactory Applications

The escalating development and improvement of gas sensing ability in industrial equipment, or "machine olfactory", propels the evolution of gas sensors toward enhanced sensitivity, selectivity, stability, power efficiency, cost-effectiveness, and longevity. Two-dimensional (2D) materials, distinguished by their atomic-thin profile, expansive specific surface area, remarkable mechanical strength, and surface tunability, hold significant potential for addressing the intricate challenges in gas sensing. However, a comprehensive review of 2D materials-based gas sensors for specific industrial applications is absent. This review delves into the recent advances in this field and highlights the potential applications in industrial machine olfaction. The main content encompasses industrial scenario characteristics, fundamental classification, enhancement methods, underlying mechanisms, and diverse gas sensing applications. Additionally, the challenges associated with transitioning 2D material gas sensors from laboratory development to industrialization and commercialization are addressed, and future-looking viewpoints on the evolution of next-generation intelligent gas sensory systems in the industrial sector are prospected.

Nanorod-like Bimetallic Oxide for Enhancing the Performance of Supercapacitor Electrodes

Supercapacitors are widely used in many fields owing to their advantages, such as high power, good cycle performance, and fast charging speed. Among the many metal-oxide cathode materials reported for supercapacitors, NiMoO4 is currently the most promising electrode material for high-specific-energy supercapacitors. We have employed a rational design approach to create a nanorod-like NiMoO4 structure, which serves as a conductive scaffold for supercapacitors; the straightforward layout has led to outstanding results, with nanorod-shaped NiMoO4 exhibiting a remarkable capacity of 424.8 F g-1 at 1 A g-1 and an impressive stability of 80.2% capacity preservation even after 3500 cycles, which surpasses those of the majority of previously reported NiMoO4 materials. NiMoO4//AC supercapacitors demonstrate a remarkable energy density of 46.31 W h kg-1 and a power density of 0.75 kW kg-1. This synthesis strategy provides a facile method for the fabrication of bimetallic oxide materials for high-performance supercapacitors.

Azo-Linkage Redox Metal-Organic Framework Incorporating Carbon Nanotubes for High-Performance Aqueous Energy Storage

The design of well-defined hierarchical free-standing electrodes for robust high-performance energy storage is challenging. We report herein that azo-linkage redox metal-organic frameworks (MOFs) incorporate single-walled carbon nanotubes (CNTs) as flexible electrodes. The in situ-guided growth, crystallinity and morphology of UiO-66-NO2 MOFs were finely controlled in the presence of CNTs. The MOFs' covalent anchoring to CNTs and solvothermal grafting anthraquinone (AQ) pendants endow the hybrid (denoted as CNT@UiO-66-AQ) with greatly improved conductivity, charge storage pathways and electrochemical dynamics. The flexible CNT@UiO-66-AQ displays a highest areal specific capacitance of 302.3 mF cm-2 (at 1 mA cm-2) in -0.4~0.9 V potential window, together with 100% capacitance retention over 5000 cycles at 5 mA cm-2. Its assembled symmetrical supercapacitor (SSC) achieves a maximum energy density of 0.037 mWh cm-2 and a maximum power density of 10.4 mW cm-2, outperforming many MOFs-hybrids-based SSCs in the literature. Our work may open a new avenue for preparing azo-coupled redox MOFs hybrids with carbaneous substrates for high-performance robust aqueous energy storage.

Recent progress in 1D MOFs and their applications in energy and environmental fields

Metal organic frameworks (MOFs) are porous coordination polymers with adjustable nanostructure, high porosity and large surface areas. These features make MOFs, their derivates and composites all delivered remarkable potential in energy and environmental fields, such as rechargeable batteries, supercapacitors, catalysts, water purification and desalination, gas treatment, toxic matter degradation, etc. In particular, one-dimensional (1D) MOFs have generated extensive attention due to their unique 1D nanostructures. To prepare 1D MOF nanostructures, it is necessary to explore and enhance synthesis routes. In this review, the preparation of 1D MOF materials and their recent process applied in energy and environmental fields will be discussed. The relationship between MOFs' 1D morphologies and the properties in their applications will also be analyzed. Finally, we will also summary and make perspectives about the future development of 1D MOFs in fabrication and applications in energy and environmental fields.

Metal-Organic Framework Materials for Electrochemical Supercapacitors

Exploring new materials with high stability and capacity is full of challenges in sustainable energy conversion and storage systems. Metal-organic frameworks (MOFs), as a new type of porous material, show the advantages of large specific surface area, high porosity, low density, and adjustable pore size, exhibiting a broad application prospect in the field of electrocatalytic reactions, batteries, particularly in the field of supercapacitors. This comprehensive review outlines the recent progress in synthetic methods and electrochemical performances of MOF materials, as well as their applications in supercapacitors. Additionally, the superiorities of MOFs-related materials are highlighted, while major challenges or opportunities for future research on them for electrochemical supercapacitors have been discussed and displayed, along with extensive experimental experiences.

Homogeneous Elongation of N-Doped CNTs over Nano-Fibrillated Hollow-Carbon-Nanofiber: Mass and Charge Balance in Asymmetric Supercapacitors Is No Longer Problematic

The hurdle of fabricating asymmetric supercapacitor (ASC) devices using a faradic cathode and a double layer anode is challenging due to the required large amount of active mass of anodic material compared to that of the cathodic material during mass balancing due to the large difference in capacitance values of the two electrodes. Here, the problem is addressed by engineering a negative electrode that furnishes an ultrahigh capacitance. An in situ developed metal-organic framework (MOF)-based thermal treatment is adopted to grow highly porous N-doped carbon nanotubes (CNTs) containing submerged Co nanoparticles over nano-fibrillated electrospun hollow carbon nanofibers (HCNFs). The optimized CNT@HCNF-1.5 furnishes an ultrahigh capacitance approaching 712 F g^-1 with excellent rate capability. The capacitance reported from this work is the highest for any carbonaceous material reported to date. The CNT@HCNF-1.5 is further used to fabricate symmetric supercapacitors (SSCs), as well as ASC devices. Remarkably, both the SSC and ASC devices furnish incredible performances in all aspects of SCs, such as a high energy density, long cycle life, and high rate capability, displaying decent practical applicability. The energy density of the SSC device reaches as high as 20.13 W h kg^-1 , whereas that of ASC approaches 87.5 W h kg^-1 .

Co2P decorated Co3O4 nanocomposites supported on carbon cloth with enhanced electrochemical performance for asymmetric supercapacitors

An effective strategy is demonstrated to promote electrochemical performance by the combination of Co3O4 with Co2P to form a composite electrode.

Mo-doped Co3O4 ultrathin nanosheet arrays anchored on nickel foam as a bi-functional electrode for supercapacitor and overall water splitting

Simple preparation, favorable price and environmental protection have been a long-term challenge in the field of electrochemistry. Herein, we studied and prepared a bifunctional Mo-doped Co₃O₄ ultrathin nanosheets, which has been validated as an effective binder-free electrode material for electrocatalytic water splitting and supercapacitors. The material has a large specific surface area, high electrical conductivity and exposure to more active sites, breaking down the limited performance and range of use of transition metal oxides. Benefiting from intriguing ultrathin property and conductivity, OER and HER process of 0.4Mo-Co₃O₄ have a small Tafel slope of 83.7 and 98 mV dec^-1, respectively. The current density at 10 mA cm^-2 show a low overpotential of 315 and 79 mV and significant stability. The water electrolytic device requires a potential of 1.64 V to reach 10 mA cm^-2, and the potential change is negligible after 12 h of continuous electrolysis. In addition, the manifest improved electrochemical performance of 0.3Mo-Co₃O₄ as supercapacitor electrode material shows high areal capacitance 2815 mF cm^-2 at 1 mA cm^-2, excellent rate performance (85% at 10 mA cm^-2) and retains 90% of the initial capacitance by cycling 5000 at a current density of 10 mA cm^-2. Moreover, 0.3Mo-Co₃O₄||0.3Mo-Co₃O₄ symmetrical supercapacitor has a maximum volumetric energy density of 1.25 mW h cm^-3 at a power density of 7.1 mW cm^-3 and superior cycle life. The influence of doping on electrochemical performance was studied by changing the content of doped metal ions, which is of great significance for the exploration of supercapacitor and electrocatalytic hydrolysis of bifunctional electrode materials.

Recent Development of Flexible and Stretchable Supercapacitors Using Transition Metal Compounds as Electrode Materials

Flexible and stretchable supercapacitors (FS-SCs) are promising energy storage devices for wearable electronics due to their versatile flexibility/stretchability, long cycle life, high power density, and safety. Transition metal compounds (TMCs) can deliver a high capacitance and energy density when applied as pseudocapacitive or battery-like electrode materials owing to their large theoretical capacitance and faradaic charge-storage mechanism. The recent development of TMCs (metal oxides/hydroxides, phosphides, sulfides, nitrides, and selenides) as electrode materials for FS-SCs are discussed here. First, fundamental energy-storage mechanisms of distinct TMCs, various flexible and stretchable substrates, and electrolytes for FS-SCs are presented. Then, the electrochemical performance and features of TMC-based electrodes for FS-SCs are categorically analyzed. The gravimetric, areal, and volumetric energy density of SC using TMC electrodes are summarized in Ragone plots. More importantly, several recent design strategies for achieving high-performance TMC-based electrodes are highlighted, including material composition, current collector design, nanostructure design, doping/intercalation, defect engineering, phase control, valence tuning, and surface coating. Integrated systems that combine wearable electronics with FS-SCs are introduced. Finally, a summary and outlook on TMCs as electrodes for FS-SCs are provided.

Ultrathin and Highly Crumpled/Porous CoP Nanosheet Arrays Anchored on Graphene Boosts the Capacitance and Their Synergistic Effect toward High-Performance Battery-Type Hybrid Supercapacitors

Constructing novel electrode materials with supernal specific capacitance and cycle stability is important for the practical applications of supercapacitors. Herein, ultrathin and highly crumpled CoP/reduced graphene oxide (rGO) nanosheet arrays are grown on nickel foam (NF) through a hydrothermal-phosphidation route. Benefitting from the synergistic effects of CoP with large specific capacity and rGO with high conductivity and ultrathin nanosheet arrays structure, CoP/rGO shows extraordinary electrochemical performance. The CoP/rGO electrode possesses a superior specific capacity of 1438.0 C g^-1 (3595.0 F g^-1) at 1 A g^-1, which is 3.43, 2.05, and 2.26 times larger than those of Co(OH)₂/rGO, Co₃O₄/rGO, and bare CoP. In particular, the CoP/rGO nanosheet arrays show the highest specific capacities among the monometallic phosphide-based nanostructures reported so far. The CoP/rGO retains 1198.9 C g^-1 (2997.2 F g^-1) at 10 A g^-1, revealing the outstanding rate capability of 83%. Theoretical calculations reveal that rGO can adequately reduce the absorption energy of OH^- on CoP, which makes CoP/rGO have strong adsorption capacity of OH^-, resulting in boosting electrochemical performance. A hybrid supercapacitor of CoP/rGO/NF//AC was designed, which presents a superior energy density of 43.2 Wh kg^-1 at a power density of 1010.5 W kg^-1. After 10 000 cycles, the CoP/rGO/NF//AC supercapacitor reveals excellent cycling durability with a capacitance retention of 89%. This work provides a new insight into the design of high-performance electrode materials by combining high capacitive metal phosphides with conductive carbon, which is of great significance for energy storage systems.

Transition Metal Oxide Electrode Materials for Supercapacitors: A Review of Recent Developments

In the past decades, the energy consumption of nonrenewable fossil fuels has been increasing, which severely threatens human life. Thus, it is very urgent to develop renewable and reliable energy storage devices with features of environmental harmlessness and low cost. High power density, excellent cycle stability, and a fast charge/discharge process make supercapacitors a promising energy device. However, the energy density of supercapacitors is still less than that of ordinary batteries. As is known to all, the electrochemical performance of supercapacitors is largely dependent on electrode materials. In this review, we firstly introduced six typical transition metal oxides (TMOs) for supercapacitor electrodes, including RuO₂, Co₃O₄, MnO₂, ZnO, XCo₂O₄ (X = Mn, Cu, Ni), and AMoO₄ (A = Co, Mn, Ni, Zn). Secondly, the problems of these TMOs in practical application are presented and the corresponding feasible solutions are clarified. Then, we summarize the latest developments of the six TMOs for supercapacitor electrodes. Finally, we discuss the developing trend of supercapacitors and give some recommendations for the future of supercapacitors.

Mechanism orienting structure construction of electrodes for aqueous electrochemical energy storage systems: a review

Aqueous electrochemical energy storage systems (AEESS) are considered as the most promising energy storage devices for large-scale energy storage. AEESSs, including batteries and supercapacitors, have received extensive attention due to their low cost, eco-friendliness, and high safety. However, the insufficient energy densities of the state-of-the-art AEESSs limit their practical applications which are mainly dominated by the electrochemical performances of individual electrode materials. Understanding the underlying relationship between structures, reaction mechanisms, and performances can further lead to the design and optimization of structures of the electrodes instructively, thereby harvesting favorable performances. This review classified the intrinsic logic of structure-mechanism-performance by taking some prevailing mechanisms with some classical structures of materials as examples. Moreover, some problem-oriented structural engineering strategies are proposed aiming to optimize their performance. Finally, comprehensive structural design engineering and some suggestions for fine modifications of electrode materials at the atomic and molecular levels are proposed to combine the advantages of supercapacitor- and battery-type materials for designing excellent electrode materials for AEESSs.

Direct Growth of Oxygen Vacancy-Enriched Co3O4 Nanosheets on Carbon Nanotubes for High-Performance Supercapacitors

Ultrathin Co₃O₄ nanosheets (NSs) with abundant oxygen vacancies on conductive carbon nanotube (CNT) nanocomposites (termed as Co₃O₄-NSs/CNTs) are easily achieved by an effective NaBH₄-assisted cyanogel hydrolysis strategy under ambient conditions. The specific capacitance of Co₃O₄-NSs/CNTs with 5% CNT mass can reach 1280.4 F g^-1 at 1 A g^-1 and retain 112.5% even after 10 000 cycles, demonstrating very high electrochemical capability and stability. When assembled in the two-electrode Co₃O₄-NSs/CNTs-5%//reduced graphene oxide (rGO) system, a maximum specific energy density of 37.2 Wh kg^-1 (160.2 W kg^-1) is obtained at room temperature. Ultrathin structure of nanosheets, abundant oxygen vacancies, and the synergistic effect between Co₃O₄-NSs and CNTs are crucial factors for excellent electrochemical performance. Specifically, these characteristics favor rapid electron transfer, complete exposure of the active interface, and sufficient adsorption/desorption of electrolyte ions within the active material. This work gives insights into the efficient construction of two-dimensional hybrid electrodes with high performance for the new-generation energy storage system.

Urchin-like NiCo2O4 hollow microspheres with oxygen vacancies synthesized by self-template for supercapacitor

The designed urchin-like NiCo2O4 material exhibits excellent supercapacitive performance due to the hollow porous structure and oxygen vacancies.

ZIF-67-derived NiCo2O4@Co2P/Ni2P honeycomb nanosheets on carbon cloth for high-performance asymmetric supercapacitors

NiCo2O4@Co2P/Ni2P-CC, for the first time, was prepared using ZIF-67 as sacrificial templates through 4 steps procedure. Based on honeycomb structures, NiCo2O4@Co2P/Ni2P-CC electrode shows high areal capacitance and excellent cycle stability.

Ultralow Ru-Induced Bimetal Electrocatalysts with a Ru-Enriched and Mixed-Valence Surface Anchored on a Hollow Carbon Matrix for Oxygen Reduction and Water Splitting

Rational design of trifunctional electrocatalysts with robust efficiency used for oxygen reduction, oxygen evolution, and hydrogen evolution reactions (ORR, OER, and HER) is of significance to renewable energy conversion techniques, which remains a challenging issue. This study integrates dominant Co/Co₃O₄ with a small fraction of RuO₂ and the CoRu alloy anchored on a hollow carbon matrix, originating from the novel Ru-doped hollow metal-organic framework (MOF) precursor, which is synthesized via tannic etching and ion exchange. Notably, the introduced ultralow Ru (1.28 wt %) not only generates new Ru-based species but also induces a Ru-enriched surface with abundant oxygen vacancies. Moreover, a suitable balance among different valencies of Co or Ru can be tuned by oxidation time, resulting in preferable Co²⁺ and Ru⁴⁺ species. Triggered by these unparalleled surface properties along with good conductivity, hollow structure, and the synergistic effect of multiple active sites, the resulting CoRu-O/A@hollow nitrogen-doped carbon (HNC) shows robust catalytic performance for ORR/OER/HER in an alkaline electrolyte. Typically, it exhibits a potential gap of 0.662 V for OER/ORR and enables an alkaline water electrolyzer with a cell voltage of 1.558 V at 10 mA cm^-2. This work would serve as guidance for well construction of transition-metal-based trifunctional electrocatalysts by the MOF-assisted strategy or the modulation effects of low-content Ru.

The Application of Metal-Organic Frameworks and Their Derivatives for Supercapacitors

Supercapacitors (SCs), one of the most popular types of energy-storage devices, present lots of advantages, such as large power density and fast charge/discharge capability. Being the promising SCs electrode materials, metal-organic frameworks (MOFs) and their derivatives have gained ever-increasing attention due to their large specific surface area, controllable porous structure and rich diversity. Herein, the recent development of MOFs-based materials and their application in SCs as the electrode are reviewed and summarized. The preparation method, the morphology of the materials and the electrical performance of various MOFs and their derivatives (such as carbon, metal oxide/hydroxide and metal sulfide) are briefly discussed. Most of recent works concentrate on Ni-, Co- and Mn-MOFs and their composites/derivatives. Conclusions and our outlook for the researches are also given, which would be a valuable guideline for the rational design of MOFs materials for SCs in the near future.

Self-supported beaded Au@Co3O4 nanowire arrays perform electrocatalytic CO2 reduction in water to syngas and water oxidation to O2

Beaded Au@Co₃O₄ nanowire arrays were prepared and function as a bifunctional electrocatalyst with outstanding electrochemical performance in producing syngas and the oxygen evolution reaction.