The rise of low-cost sensing for managing air pollution in cities

Suitability of using carbon dioxide as a tracer gas for studying vehicle emission dispersion in a real street canyon

High-rise buildings form deep urban street canyons and restrict the dispersion of vehicle emissions, posing severe health risks to the public by aggravating roadside air quality. Field measurements are important for understanding the dispersion process of tailpipe emissions in street canyons, while a major challenge is the lack of a suitable tracer gas. Carbon dioxide (CO2), which is safe to the public and inexpensive to obtain, can be reliably measured by existing gas analysers. This study investigated the suitability of using CO2 as a tracer gas for characterising vehicle emission dispersion in a real-world street canyon. The tracer gas was released via a line or point source, whose dispersion was characterised by a sensors network comprising low-cost air quality sensors. The results showed that the CO2 contained in the exhaust gas of a test vehicle itself had unmeasurable effect at roadsides. Both the line and point sources produced obvious CO2 level elevations at approximately 30 s after the test vehicle passed by. In addition, for both line and point sources, the CO2 elevations were much more distinct at the roadside next to tailpipe exit than the opposite side, and were higher at 0.8 m than 1.6 m above the ground. The present study demonstrated that using CO2 as a tracer gas is feasible for investigating vehicle emission dispersion in real-world street canyons. Future studies are needed to improve the gas release rate of the developed tracer gas systems for more reliable measurements and larger street canyons.

Leveraging low-cost sensors to predict nitrogen dioxide for epidemiologic exposure assessment

BACKGROUND

Statistical models of air pollution enable intra-urban characterization of pollutant concentrations, benefiting exposure assessment for environmental epidemiology. The new generation of low-cost sensors facilitate the deployment of dense monitoring networks and can potentially be used to improve intra-urban models of air pollution.

OBJECTIVE

Develop and evaluate a spatiotemporal model for nitrogen dioxide (NO2) in the Puget Sound region of WA, USA for the Adult Changes in Thought Air Pollution (ACT-AP) study and assess the contribution of low-cost sensor data to the model's performance through cross-validation.

METHODS

We developed a spatiotemporal NO2 model for the study region incorporating data from 11 agency locations, 364 supplementary monitoring locations, and 117 low-cost sensor (LCS) locations for the 1996-2020 time period. Model features included long-term time trends and dimension-reduced land use regression. We evaluated the contribution of LCS network data by comparing models fit with and without sensor data using cross-validated (CV) summary performance statistics.

RESULTS

The best performing model had one time trend and geographic covariates summarized into three partial least squares components. The model, fit with LCS data, performed as well as other recent studies (agency cross-validation: CV- root mean square error (RMSE) = 2.5 ppb NO2; CV- coefficient of determination (R 2 ) = 0.85). Predictions of NO2 concentrations developed with LCS were higher at residential locations compared to a model without LCS, especially in recent years. While LCS did not provide a strong performance gain at agency sites (CV-RMSE = 2.8 ppb NO2; CV-R 2  = 0.82 without LCS), at residential locations, the improvement was substantial, with RMSE = 3.8 ppb NO2 andR 2  = 0.08 (without LCS), compared to CV-RMSE = 2.8 ppb NO2 and CV-R 2  = 0.51 (with LCS).

IMPACT

We developed a spatiotemporal model for nitrogen dioxide (NO2) pollution in Washington's Puget Sound region for epidemiologic exposure assessment for the Adult Changes in Thought Air Pollution study. We examined the impact of including low-cost sensor data in the NO2 model and found the additional spatial information the sensors provided predicted NO2 concentrations that were higher than without low-cost sensors, particularly in recent years. We did not observe a clear, substantial improvement in cross-validation performance over a similar model fit without low-cost sensor data; however, the prediction improvement with low-cost sensors at residential locations was substantial. The performance gains from low-cost sensors may have been attenuated due to spatial information provided by other supplementary monitoring data.

The Role of Community Science in Addressing Policy Change: A Critical Review of Air Pollution Literature

BACKGROUND

Community air pollution science serves as a vital tool in public health and urban planning, enabling communities to advocate for policy changes that improve public health outcomes. Despite its potential, there is a noticeable gap in translating research findings into policy actions.

OBJECTIVES

This review aims to assess the focus of studies on community air pollution science published between 1990-2023 and identify the extent to which these studies address the research-to-policy gap.

METHODS

We conducted a comprehensive review of 131 studies that utilize low-cost sensors for monitoring air pollution. The review specifically looked for how these studies contribute to bridging the research-to-policy gap.

RESULTS

Our findings indicate a significant emphasis on evaluating the performance of low-cost sensors, with 90% of the studies centered on this aspect. Only 10% of the studies explicitly aimed at addressing the research-to-policy gap. Among these, 10 studies employed distinct theories of change to tackle this issue effectively.

CONCLUSION

There is a critical need for a paradigm shift in community science research to enhance the impact of scientific findings on policy-making. This shift should include strategies such as equitable sensor distribution, a broader focus on regions in the Global South, and proactive engagement with policymakers from the early stages of research.

RECOMMENDATIONS

Future research should prioritize closing the research-to-policy gap by incorporating these strategies to ensure that community air pollution science fully realizes its potential in shaping public health policies.

Traditional and low-cost technical approaches for investigating greenhouse gases and particulate matter distribution along an urban-to-rural transect (Greve River Basin, Central Italy)

Human activities, largely tied to fossil fuels and intensive agriculture, emit massive amounts of climate-altering species and harmful pollutants into the atmosphere that affect soil, ecosystems, and water. Air quality monitoring is crucial to minimize harmful effects and protect human and environmental health. The Greve River basin (Tuscany, central Italy) represents an excellent example of an ecosystem affected by various anthropogenic air contaminants. The upstream areas are predominantly rural, while the downstream zones are characterized by urban and industrial development. Air pollutants throughout the basin were measured adopting two strategies: (i) fixed monitoring at five sites using multiparametric stations equipped with low-cost sensors for CO2, CH4, and PM2.5 concentrations; (ii) measurements along a transect using a mobile monitoring station equipped with a Picarro G2201-i analyzer for the determination of CO2 and CH4 concentrations and 13C/12C values of the two gases. Results revealed relatively high CO2 and CH4 concentrations downstream, mainly due to vehicular traffic based on the isotopic signature. The temporal and spatial distribution of the contaminants mirrored the evolution of the Planetary Boundary Layer, with peak concentrations in the early morning due to stable atmospheric conditions, and contaminant dilution due to air turbulence during the daytime. Particulate (PM2.5) distribution showed a trend similar to gaseous pollutants, being strongly dependent on wind speed and rainfall events. The high spatiotemporal resolution of data acquisition provided by the low-cost stations for air quality measurements represents an important advance for developing monitoring strategies, complementing the traditional instrumentation commonly used by agencies.

Air Pollution Monitoring Using Cost-Effective Devices Enhanced by Machine Learning

Given the significant impact of air pollution on global health, the continuous and precise monitoring of air quality in all populated environments is crucial. Unfortunately, even in the most developed economies, current air quality monitoring networks are largely inadequate. The high cost of monitoring stations has been identified as a key barrier to widespread coverage, making cost-effective air quality monitoring devices a potential game changer. However, the accuracy of the measurements obtained from low-cost sensors is affected by many factors, including gas cross-sensitivity, environmental conditions, and production inconsistencies. Fortunately, machine learning models can capture complex interdependent relationships in sensor responses and thus can enhance their readings and sensor accuracy. After gathering measurements from cost-effective air pollution monitoring devices placed alongside a reference station, the data were used to train such models. Assessments of their performance showed that models tailored to individual sensor units greatly improved measurement accuracy, boosting their correlation with reference-grade instruments by up to 10%. Nonetheless, this research also revealed that inconsistencies in the performance of similar sensor units can prevent the creation of a unified correction model for a given sensor type.

Exploring Climate and Air Pollution Mitigating Benefits of Urban Parks in Sao Paulo Through a Pollution Sensor Network

Ambient air pollution is the most important environmental factor impacting human health. Urban landscapes present unique air quality challenges, which are compounded by climate change adaptation challenges, as air pollutants can also be affected by the urban heat island effect, amplifying the deleterious effects on health. Nature-based solutions have shown potential for alleviating environmental stressors, including air pollution and heat wave abatement. However, such solutions must be designed in order to maximize mitigation and not inadvertently increase pollutant exposure. This study aims to demonstrate potential applications of nature-based solutions in urban environments for climate stressors and air pollution mitigation by analyzing two distinct scenarios with and without green infrastructure. Utilizing low-cost sensors, we examine the relationship between green infrastructure and a series of environmental parameters. While previous studies have investigated green infrastructure and air quality mitigation, our study employs low-cost sensors in tropical urban environments. Through this novel approach, we are able to obtain highly localized data that demonstrates this mitigating relationship. In this study, as a part of the NERC-FAPESP-funded GreenCities project, four low-cost sensors were validated through laboratory testing and then deployed in two locations in São Paulo, Brazil: one large, heavily forested park (CIENTEC) and one small park surrounded by densely built areas (FSP). At each site, one sensor was located in a vegetated area (Park sensor) and one near the roadside (Road sensor). The locations selected allow for a comparison of built versus green and blue areas. Lidar data were used to characterize the profile of each site based on surrounding vegetation and building area. Distance and class of the closest roadways were also measured for each sensor location. These profiles are analyzed against the data obtained through the low-cost sensors, considering both meteorological (temperature, humidity and pressure) and particulate matter (PM1, PM2.5 and PM10) parameters. Particulate matter concentrations were lower for the sensors located within the forest site. At both sites, the road sensors showed higher concentrations during the daytime period. These results further reinforce the capabilities of green-blue-gray infrastructure (GBGI) tools to reduce exposure to air pollution and climate stressors, while also showing the importance of their design to ensure maximum benefits. The findings can inform decision-makers in designing more resilient cities, especially in low-and middle-income settings.

Spatiotemporal modeling of long-term PM2.5 concentrations and population exposure in Greece, using machine learning and statistical methods

The lack of high-resolution, long-term PM2.5 observations in Greece and the Eastern Mediterranean hampers the development of spatial models that are crucial for providing representative exposure estimates to health studies. This work presents a spatial modeling approach to address this gap and assess PM2.5 spatial variability for the first time on a national level in Greece, by integrating in situ observations, meteorology, emissions and satellite AOD data among others. A high-resolution (1 km2) gridded dataset of PM2.5 concentrations across Greece from 2015 to 2022 was developed, and seven statistical, machine learning, and hybrid models were evaluated under different prediction scenarios. Random Forest (RF) models demonstrated superior performance, (R2 = 0.73, MAE = 2.2 μg m-3), validated against ground-based measurements. Winter months consistently showed the highest PM2.5 levels, averaging 16.8 μg m-3, over the domain, due to residential biomass burning (BB) and limited atmospheric dispersion. Summer months had the lowest concentrations, averaging 10.3 μg m-3, while substantial decreases nationwide were observed during the 2020 COVID-19 lockdown. Population exposure analysis indicated that the entire Greek population was exposed to long-term PM2.5 concentrations exceeding the WHO air quality guideline (AQG) of 5 μg m-3. Moreover, the dataset revealed elevated PM2.5 levels across several regions of mainland Greece. Notably, 70 % to 90 % of the population experience levels exceeding 10 μg m-3 in Central and Northern regions of continental Greece like Thessaly, Central Macedonia, and Ioannina. The Ioannina region, which is severely impacted by residential BB, recorded pollution levels up to five times the WHO AQG highlighting the urgent need for targeted interventions. The high-resolution RF model's superior performance for monthly average concentrations, compared to the Copernicus Atmosphere Monitoring Service (CAMS) dataset, renders it a reliable tool for long-term PM2.5 assessment in Greece that can support air quality management and health studies.

Spatiotemporal distribution prediction for PM2.5 based on STXGBoost model and high-density monitoring sensors in Zhengzhou High Tech Zone, China

The increasing demand for air pollution control has driven the application of low-cost sensors (LCS) in air quality monitoring, enabling higher observation density and improved air quality predictions. However, the inherent limitations in data quality from LCS necessitate the development of effective methodologies to optimize their application. This study established a hybrid framework to enhance the accuracy of spatiotemporal predictions of PM2.5, standard instrument measurements were employed as reference data for the remote calibration of LCS. To account for local emission characteristics, the calibration model was trained using statistical values from LCS during periods of reduced anthropogenic emissions. This calibration approach significantly improved data quality, increasing R2 values of LCS data from 0.60 to 0.85. Subsequently, an advanced predictive model, STXGBoost, was developed, combining Kriging interpolation technology with high-density LCS data to integrate temporal trends and geographic spatial correlations. The STXGBoost model effectively captured the spatiotemporal variability of PM2.5 data, producing accurate and high spatiotemporal resolution PM2.5 prediction maps, with R2 values of 0.96, 0.92, and 0.89 for 1-h, 4-h, and 48-h predictions, respectively. These findings demonstrate the feasibility of generating high-resolution urban air pollution maps by integrating high-density ground monitoring data with advanced computational approaches. This framework provides valuable support for precise management and informed decision-making in urban atmospheric environments.

Three-Dimensionally Printed Mini Air Scrubbing Cartridges Based on Nano-Graphite for Air Pollution Monitoring

Ecosystems and environments are impacted by atmospheric pollution, which has significant effects on human health and climate. For these reasons, devices for developing portable and low-cost monitoring systems are required to assess human exposure during daily life. In the last decade, the advancements of 3D printing technology have pushed researchers to exploit, in different fields of applications, the advantages offered, such as rapid prototyping and low-cost replication of complex sample treatment devices. In this work, we present the fabrication and testing of 3D printed cartridges based on both commercial photopolymer and a modified version with the intrusion of nano graphite. The air scrubbing performances towards some volatile organic compounds have been investigated, inserting the cartridges into a low-cost monitoring system using a photoionization sensor. In particular, the cartridges were tested in the presence of concentrations of ethanol, benzene, and toluene to evaluate the abatement percentage with and without their use. Although the results have shown that all cartridges abated ethanol and toluene, the abatement of benzene increased 20 times in the case of cartridges based on modified resin with nano graphite. These results could enable their employment to reduce the concentration of interfering compounds in low-cost monitoring systems.

Pinpointing sources of pollution using citizen science and hyperlocal low-cost mobile source apportionment

Currently, methodologies for the identification and apportionment of air pollution sources are not widely applied due to their high cost. We present a new approach, combining mobile measurements from multiple sensors collected from the daily walks of citizen scientists, in a high population density area of Birmingham, UK. The methodology successfully pinpoints the different sources affecting the local air quality in the area using only a handful of measurements. It was found that regional sources of pollution were mostly responsible for the PM2.5 and PM1 concentrations. In contrast, PM10 was mostly associated with local sources. The total particle number and the lung deposited surface area of PM were almost solely associated with traffic, while black carbon was associated with both the sources from the urban background and local traffic. Our analysis showed that while the effect of the hyperlocal sources, such as emissions from construction works or traffic, do not exceed the distance of a couple of hundred meters, they can influence the health of thousands of people in densely populated areas. Thus, using this novel approach we illustrate the limitations of the present measurement network paradigm and offer an alternative and versatile approach to understanding the hyperlocal factors that affect urban air quality. Mobile monitoring by citizen scientists is shown to have huge potential to enhance spatiotemporal resolution of air quality data without the need of extensive and expensive campaigns.

Spatiotemporal Analysis of Complex Emission Dynamics in Port Areas Using High-Density Air Sensor Network

Cargo terminals, as pivotal hubs of mechanical activities, maritime shipping, and land transportation, are significant sources of air pollutants, exhibiting considerable spatiotemporal heterogeneity due to the complex and irregular nature of emissions. This study employed a high-density air sensor network with 17 sites across four functional zones in two Shanghai cargo terminals to monitor NO and NO2 concentrations with high spatiotemporal resolution post sensor data validation against regulatory monitoring stations. Notably, NO and NO2 concentrations within the terminal surged during the night, peaking at 06:00 h, likely due to local regulations on heavy-duty diesel trucks. Spatial analysis revealed the highest NO concentrations in the core operational areas and adjacent roads, with significantly lower levels in the outer ring, indicating strong emission sources and limited dispersion. Employing the lowest percentile method for baseline extraction from high-resolution data, this study identified local emissions as the primary source of NO, constituting over 80% of total emissions. Elevated background concentrations of NO2 suggested a gradual oxidation of NO into NO2, with local emissions contributing to 32-70% of the total NO2 concentration. These findings provide valuable insights into the NO and NO2 emission characteristics across different terminal areas, aiding decision-makers in developing targeted emission control policies.

Characterizing and Implementing the Hamamatsu C12880MA Mini-Spectrometer for Near-Surface Reflectance Measurements of Inland Waters

In recent decades, inland water remote sensing has seen growing interest and very strong development. This includes improved spatial resolution, increased revisiting times, advanced multispectral sensors and recently even hyperspectral sensors. However, inland waters are more challenging than oceanic waters due to their higher complexity of optically active constituents and stronger adjacency effects due to their small size and nearby vegetation and built structures. Thus, bio-optical modeling of inland waters requires higher ground-truthing efforts. Large-scale ground-based sensor networks that are robust, self-sufficient, non-maintenance-intensive and low-cost could assist this otherwise labor-intensive task. Furthermore, most existing sensor systems are rather expensive, precluding their employability. Recently, low-cost mini-spectrometers have become widely available, which could potentially solve this issue. In this study, we analyze the characteristics of such a mini-spectrometer, the Hamamatsu C12880MA, and test it regarding its application in measuring water-leaving radiance near the surface. Overall, the measurements performed in the laboratory and in the field show that the system is very suitable for the targeted application.

First in-Lab Testing of a Cost-Effective Prototype for PM2.5 Monitoring: The P.ALP Assessment

The goal of the present research was to assess, under controlled laboratory conditions, the accuracy and precision of a prototype device (named 'P.ALP': Ph.D. Air-quality Low-cost Project) developed for PM2.5 concentration level monitoring. Indeed, this study follows a complementary manuscript (previously published) focusing on the in-field evaluation of the device's performance. Four P.ALP prototypes were co-located with the reference instrument in a calm-air aerosol chamber at the NIOSH laboratories in Pittsburgh, PA (USA), used by the Center for Direct Reading and Sensor Technologies. The devices were tested for 10 monitoring days under several exposure conditions. To evaluate the performance of the prototypes, different approaches were employed. After the data from the devices were stored and prepared for analysis, to assess the accuracy (comparing the reference instrument with the prototypes) and the precision (comparing all the possible pairs of devices) of the P.ALPs, linear regression analysis was performed. Moreover, to find out the applicability field of this device, the US EPA's suggested criteria were adopted, and to assess error trends of the prototype in the process of data acquisition, Bland-Altman plots were built. The findings show that, by introducing ad hoc calibration factors, the P.ALP's performance needs to be further implemented, but the device can monitor the concentration trend variations with satisfying accuracy. Overall, the P.ALP can be involved in and adapted to a wide range of applications because of the inexpensive nature of the components, the small dimensions, and the high data storage capacity.

Combining Google traffic map with deep learning model to predict street-level traffic-related air pollutants in a complex urban environment

BACKGROUND

Traffic-related air pollution (TRAP) is a major contributor to urban pollution and varies sharply at the street level, posing a challenge for air quality modeling. Traditional land use regression models combined with data from fixed monitoring stations may be unable to predict and characterize fine-scale TRAP, especially in complex urban environments influenced by various features. This study aims to estimate fine-scale (50 m) concentrations of nitrogen oxides (NO and NO₂) in Hong Kong using a deep learning (DL) structured model.

METHODS

We collected data from mobile air quality sensors on buses and crowd-sourced Google real-time traffic status as a proxy for real-time traffic emissions. Our DL model was compared with existing machine learning models to assess performance improvements. Using an interpretable machine learning method, we hierarchically evaluated the global, local, and interaction effects for different features.

RESULTS

Our DL model outperformed existing machine learning models, achieving R2 values of 0.72 for NO and 0.69 for NO₂. The incorporation of traffic status as a key predictor improved model performance by 9% to 17%. The interpretable machine learning method revealed the importance of traffic-related features and their pairwise interactions.

CONCLUSION

The results indicate that traffic-related features significantly contribute to TRAP and provide insights and guidance for urban planning. By incorporating crowd-sourced Google traffic information, we assessed traffic abatement scenarios that could inform targeted strategies for improving urban air quality.

Environmental impact assessment based on particulate matter, and chlorophyll content of urban trees

The amount of dust deposited on tree leaves is a cost-effective indicator of air quality. Our aim was to explore the leaf surface deposition, and chlorophyll content of leaves along a road section that started at an intersection, and ended in a less disturbed suburban area in Debrecen, Hungary. We also assessed the impact of meteorological conditions on the amount of deposited dust. Leaf samples were collected in July, and September 2022 from Celtis occidentalis, a frequent species in green urban areas of Debrecen. We found a significant negative correlation between dust deposition, and the distance from the intersection in July. In September, dust deposition decreased considerably compared to July, due to rainfall before the second sampling. Surprisingly, we found a positive correlation between dust deposition and chlorophyll content in July. Our findings suggest that dust deposition on leaves serves as a reliable indicator of traffic intensity, because the excess dust caused by the proximity of vehicle traffic can be detected on the leaf surface. Although, rainfall can disrupt the patterns in dust deposition that have developed over an extended period through wash-off and resuspension. Hence, it is advisable to consider these effects while selecting the sampling time and evaluating the results.

Real-time AIoT platform for monitoring and prediction of air quality in Southwestern Morocco

Urbanization and industrialization have led to a significant increase in air pollution, posing a severe environmental and public health threat. Accurate forecasting of air quality is crucial for policymakers to implement effective interventions. This study presents a novel AIoT platform specifically designed for PM2.5 monitoring in Southwestern Morocco. The platform utilizes low-cost sensors to collect air quality data, transmitted via WiFi/3G for analysis and prediction on a central server. We focused on identifying optimal features for PM2.5 prediction using Minimum Redundancy Maximum Relevance (mRMR) and LightGBM Recursive Feature Elimination (LightGBM-RFE) techniques. Furthermore, Bayesian optimization was employed to fine-tune hyperparameters of popular machine learning models for the most accurate PM2.5 concentration forecasts. Model performance was evaluated using Root Mean Square Error (RMSE), Mean Absolute Error (MAE), and the coefficient of determination (R2). Our results demonstrate that the LightGBM model achieved superior performance in PM2.5 prediction, with a significant reduction in RMSE compared to other evaluated models. This study highlights the potential of AIoT platforms coupled with advanced feature selection and hyperparameter optimization for effective air quality monitoring and forecasting.

Impacts of daily household activities on indoor particulate and NO2 concentrations; a case study from oxford UK

This study explores indoor air pollutant (PM1, PM2.5 and NO2) concentrations over a 15-week period during the COVID-19 pandemic in a typical suburban household in Oxford, UK. A multi-room intensive monitoring study was conducted in a single dwelling using 10 air quality sensors measuring real-time pollutant concentrations at 10 second intervals to assess temporal and spatial variability in PM1, PM2.5 and NO2 concentrations, identify pollution-prone areas, and investigate the impact of residents' activities on indoor air quality. Significant spatial variations in PM concentrations were observed within the study dwelling, with highest hourly concentrations (769.0 & 300.9 μg m-3 for PM2.5, and PM1, respectively) observed in the upstairs study room, which had poor ventilation. Cooking activities were identified as a major contributor to indoor particulate pollution, with peak concentrations aligning with cooking events. Indoor NO2 levels were typically higher than outdoor levels, particularly in the kitchen where a gas-cooking appliance was used. There was no significant association observed between outdoor and indoor PM concentrations; however, a clear correlation was evident between kitchen PM emissions and indoor levels. Similarly, outdoor NO2 had a limited influence on indoor air quality compared to kitchen activities. Indoor sources were found to dominate for both PM and NO2, with higher Indoor/Outdoor (I/O) ratios observed in the upstairs bedroom and the kitchen. Overall, our findings highlight the contribution of indoor air pollutant sources and domestic activities to indoor air pollution exposure, notably during the COVID-19 pandemic when people were typically spending more time in domestic settings. Our novel findings, which suggest high levels of pollutant concentrations in upstairs (first floor) rooms, underscore the necessity for targeted interventions. These interventions include the implementation of source control measures, effective ventilation strategies and occupant education for behaviour change, all aimed at improving indoor air quality and promoting healthier living environments.

High-resolution urban air pollution mapping

Variation in urban air pollution arises because of complex spatial, temporal, and chemical processes, which profoundly affect population exposure, human health, and environmental justice. This Review highlights insights from two popular in situ measurement methods-mobile monitoring and dense sensor networks-that have distinct but complementary strengths in characterizing the dynamics and impacts of the multidimensional urban air quality system. Mobile monitoring can measure many pollutants at fine spatial scales, thereby informing about processes and control strategies. Sensor networks excel at providing temporal resolution at many locations. Increasingly sophisticated studies leveraging both methods can vividly identify spatial and temporal patterns that affect exposures and disparities and offer mechanistic insight toward effective interventions. This Review summarizes the strengths and limitations of these methods and discusses their implications for understanding fine-scale processes and impacts.

Gene-environment interactions within a precision environmental health framework

Understanding the complex interplay of genetic and environmental factors in disease etiology and the role of gene-environment interactions (GEIs) across human development stages is important. We review the state of GEI research, including challenges in measuring environmental factors and advantages of GEI analysis in understanding disease mechanisms. We discuss the evolution of GEI studies from candidate gene-environment studies to genome-wide interaction studies (GWISs) and the role of multi-omics in mediating GEI effects. We review advancements in GEI analysis methods and the importance of large-scale datasets. We also address the translation of GEI findings into precision environmental health (PEH), showcasing real-world applications in healthcare and disease prevention. Additionally, we highlight societal considerations in GEI research, including environmental justice, the return of results to participants, and data privacy. Overall, we underscore the significance of GEI for disease prediction and prevention and advocate for integrating the exposome into PEH omics studies.

How urban growth dynamics impact the air quality? A case of eight Indian metropolitan cities

Air pollution is a matter of great significance that confronts the sustainable progress of urban areas. Against India's swift urbanization, several urban areas exhibit the coexistence of escalating populace and expansion in developed regions alongside extensive spatial heterogeneity. The interaction mechanism between the growth of urban areas and the expansion of cities holds immense importance for the remediation of air pollution. Henceforth, the present investigation utilizes geographically weighted regression (GWR) to examine the influence of urban expansion and population growth on air quality. The examination will use a decade of data on the variation in PM2.5 levels from 2010 to 2020 in eight Indian metropolitan cities. The study's findings demonstrate a spatial heterogeneity between urban growth dynamics and air pollution levels. Urban growth and the expansion of cities demonstrate notable positive impacts on air quality, although the growth of infilling within expanding urban areas can significantly affect air quality. Given the unique trajectories of urban development in developing countries, this research provides many suggestions for urban administrators to foster sustainable urban growth.

Quantifying the impacts of Canadian wildfires on regional air pollution networks

Wildfire smoke greatly impacts regional atmospheric systems, causing changes in the behavior of pollution. However, the impacts of wildfire smoke on pollution behavior are not easily quantifiable due to the complex nature of atmospheric systems. Air pollution correlation networks have been used to quantify air pollution behavior during ambient conditions. However, it is unknown how extreme pollution events impact these networks. Therefore, we propose a multidimensional air pollution correlation network framework to quantify the impacts of wildfires on air pollution behavior. The impacts are quantified by comparing two time periods, one during the 2023 Canadian wildfires and one during normal conditions with two complex network types for each period. In this study, the value network represents PM2.5 concentrations and the rate network represents the rate of change of PM2.5 concentrations. Wildfires' impacts on air pollution behavior are captured by structural changes in the networks. The wildfires caused a discontinuous phase transition during percolation in both network types which represents non-random organization of the most significant spatiotemporal correlations. Additionally, wildfires caused changes to the connectivity of stations leading to more interconnected networks with different influential stations. During the wildfire period, highly polluted areas are more likely to form connections in the network, quantified by an 86 % and 19 % increase in the connectivity of the value and rate networks respectively compared to the normal period. In this study, we create novel understandings of the impacts of wildfires on air pollution correlation networks, show how our method can create important insights into air pollution patterns, and discuss potential applications of our methodologies. This study aims to enhance capabilities for wildfire smoke exposure mitigation and response strategies.

Dissecting PM sensor capabilities: A combined experimental and theoretical study on particle sizing and physicochemical properties

Recent advancements in particulate matter (PM) optical measurement technology have enhanced the characterization of particle size distributions (PSDs) across various temporal and spatial scales, offering a more detailed analysis than traditional PM mass concentration monitoring. This study employs field experiments, laboratory tests, and model simulations to evaluate the influence of physicochemical characteristics of particulate matter (PM) on the performance of a compact, multi-channel PM sizing sensor. The sensor is integrated within a mini air station (MAS) designed to detect particles across 52 channels. The field experiments highlighted the sensor's ability to track hygroscopicity parameter κ-values across particle sizes, noting an increasing trend with particle size. The sensor's capability in identifying the size and mass concentration of different PM types, including ammonium nitrate, sodium chloride, smoke, incense, and silica dust particles, was assessed through laboratory tests. Laboratory comparisons with the Aerodynamic Particle Sizer (APS) showed high consistency (R2 > 0.96) for various PM sources, supported by Kolmogorov-Smirnov tests confirming the sensor's capability to match APSsize distributions. Model simulations further elucidated the influence of particle refractive index and size distributions on sensor performance, leading to optimized calibrant selection and application-specific recommendations. These comprehensive evaluations underscore the critical interplay between the chemical composition and physical properties of PM, significantly advancing the application and reliability of optical PM sensors in environmental monitoring.

Challenges and Opportunities in Calibrating Low-Cost Environmental Sensors

The use of low-cost environmental sensors has gained significant attention due to their affordability and potential to intensify environmental monitoring networks. These sensors enable real-time monitoring of various environmental parameters, which can help identify pollution hotspots and inform targeted mitigation strategies. Low-cost sensors also facilitate citizen science projects, providing more localized and granular data, and making environmental monitoring more accessible to communities. However, the accuracy and reliability of data generated by these sensors can be a concern, particularly without proper calibration. Calibration is challenging for low-cost sensors due to the variability in sensing materials, transducer designs, and environmental conditions. Therefore, standardized calibration protocols are necessary to ensure the accuracy and reliability of low-cost sensor data. This review article addresses four critical questions related to the calibration and accuracy of low-cost sensors. Firstly, it discusses why low-cost sensors are increasingly being used as an alternative to high-cost sensors. In addition, it discusses self-calibration techniques and how they outperform traditional techniques. Secondly, the review highlights the importance of selectivity and sensitivity of low-cost sensors in generating accurate data. Thirdly, it examines the impact of calibration functions on improved accuracies. Lastly, the review discusses various approaches that can be adopted to improve the accuracy of low-cost sensors, such as incorporating advanced data analysis techniques and enhancing the sensing material and transducer design. The use of reference-grade sensors for calibration and validation can also help improve the accuracy and reliability of low-cost sensor data. In conclusion, low-cost environmental sensors have the potential to revolutionize environmental monitoring, particularly in areas where traditional monitoring methods are not feasible. However, the accuracy and reliability of data generated by these sensors are critical for their successful implementation. Therefore, standardized calibration protocols and innovative approaches to enhance the sensing material and transducer design are necessary to ensure the accuracy and reliability of low-cost sensor data.

Indoor and outdoor air quality in street corner kiosks in a large metropolitan area

Poor air quality in workplaces constitutes a great concern on human health as a good fraction of our time is spent at work. In Greece, very unique workplaces are the street corner kiosks, which are freestanding boxes placed on sidewalks next to city streets and vehicular traffic, where one can find many consumer goods. As such, its employees are exposed to both outdoor and indoor air pollutants. Very few studies have examined the occupational exposure of kiosk workers to air pollutants, and thus the magnitude of this unique indoor and outdoor exposure remains unknown. The objective of this study is to investigate and compare the levels of indoor and outdoor particulate matter (PM10 and PM2.5), ultrafine particles (UFPs) and black carbon (BC) in different kiosks located in Athens, Greece, in urban-traffic and urban-background environments. Continuous measurements of the above-mentioned pollutants were carried out on a 24-h basis over 7 consecutive days at three kiosks from September to October 2019. Indoor PM10 concentrations in the urban kiosk ranged from 19.0 to 44.0 μg/m3, PM2.5 values ranged from 14.0 to 33.0 μg/m3, whereas BC concentrations ranged from 1.2 to 7.0 μg/m3 and UFPs from almost 9.5 to 47.0 × 103 pt/cm3. Outdoor PM10 and PM2.5 measurements ranged from 29.0 to 59.0 μg/m3 and from 22.0 to 39.0 μg/m3, respectively. BC outdoor concentrations ranged from 1.1 to 2.2 μg/m3. The mean hazard quotient (HQ) for PM10 (4.9) and PM2.5 (4.7) among all participants was >1. The health risk of exposure to PM10 and PM2.5 was found to be at moderate hazard levels, although in some cases we observed HQ values higher than 10 due to high PM10 and PM2.5 concentrations in the kiosks. Overall our study indicates that people working at kiosks can be exposed to very high concentrations on particulate pollution depending on a number of factors including the traffic that strongly depends on location and the time of the day.

Multi-Scenario Validation and Assessment of a Particulate Matter Sensor Monitor Optimized by Machine Learning Methods

OBJECTIVE

The aim was to evaluate and optimize the performance of sensor monitors in measuring PM2.5 and PM10 under typical emission scenarios both indoors and outdoors.

METHOD

Parallel measurements and comparisons of PM2.5 and PM10 were carried out between sensor monitors and standard instruments in typical indoor (2 months) and outdoor environments (1 year) in Shanghai, respectively. The optimized validation model was determined by comparing six machining learning models, adjusting for meteorological and related factors. The intra- and inter-device variation, measurement accuracy, and stability of sensor monitors were calculated and compared before and after validation.

RESULTS

Indoor particles were measured in a range of 0.8-370.7 μg/m3 and 1.9-465.2 μg/m3 for PM2.5 and PM10, respectively, while the outdoor ones were in the ranges of 1.0-211.0 μg/m3 and 0.0-493.0 μg/m3, correspondingly. Compared to machine learning models including multivariate linear model (ML), K-nearest neighbor model (KNN), support vector machine model (SVM), decision tree model (DT), and neural network model (MLP), the random forest (RF) model showed the best validation after adjusting for temperature, relative humidity (RH), PM2.5/PM10 ratios, and measurement time lengths (months) for both PM2.5 and PM10, in indoor (R2: 0.97 and 0.91, root-mean-square error (RMSE) of 1.91 μg/m3 and 4.56 μg/m3, respectively) and outdoor environments (R2: 0.90 and 0.80, RMSE of 5.61 μg/m3 and 17.54 μg/m3, respectively), respectively.

CONCLUSIONS

Sensor monitors could provide reliable measurements of PM2.5 and PM10 with high accuracy and acceptable inter and intra-device consistency under typical indoor and outdoor scenarios after validation by RF model. Adjusting for both climate factors and the ratio of PM2.5/PM10 could improve the validation performance.

Development and machine learning-based calibration of low-cost multiparametric stations for the measurement of CO2 and CH4 in air

The pressing issue of atmospheric pollution has prompted the exploration of affordable methods for measuring and monitoring air contaminants as complementary techniques to standard methods, able to produce high-density data in time and space. The main challenge of this low-cost approach regards the in-field accuracy and reliability of the sensors. This study presents the development of low-cost stations for high-time resolution measurements of CO2 and CH4 concentrations calibrated via an in-field machine learning-based method. The calibration models were built based on measurements parallelly performed with the low-cost sensors and a CRDS analyzer for CO2 and CH4 as reference instrument, accounting for air temperature and relative humidity as external variables. To ensure versatility across locations, diversified datasets were collected, consisting of measurements performed in various environments and seasons. The calibration models, trained with 70 % for modeling, 15 % for validation, and 15 % for testing, demonstrated robustness with CO2 and CH4 predictions achieving R2 values from 0.8781 to 0.9827 and 0.7312 to 0.9410, and mean absolute errors ranging from 3.76 to 1.95 ppm and 0.03 to 0.01 ppm, for CO2 and CH4, respectively. These promising results pave the way for extending these stations to monitor additional air contaminants, like PM, NOx, and CO through the same calibration process, integrating them with remote data transmission modules to facilitate real-time access, control, and processing for end-users.

Evaluating the performance and influencing factors of three portable black carbon monitors for field measurement

Black carbon (BC) is associated with adverse human health and climate change. Mapping BC spatial distribution imperatively requires low-cost and portable devices. Several portable BC monitors are commercially available, but their accuracy and reliability are not always satisfactory during continuous field observation. This study evaluated three models of portable black carbon monitors, C12, MA350 and DST, and investigates the factors that affect their performance. The monitors were tested in urban Beijing, where portable devices running for one month alongside a regular-size reference aethalometer AE33. The study considers several factors that could influence the monitors' performance, including ambient weather, aerosol composition, loading artifacts, and built-in algorithms. The results show that MA350 and DST present considerable discrepancies to the reference instrument, mainly occurring at lower concentrations (0-500 ng/m3) and higher concentrations (2500-8000 ng/m3), respectively. These discrepancies were likely caused by the anomalous noise of MA350 and the loading artifacts of DST. The study also suggests that the ambient environment has limited influence on the monitors' performance, but loading artifacts and accompanying compensation algorithms can result in unrealistic data. Based on the evaluation, the study suggests that C12 is the best choice for unsupervised field measurement, DST should be used in scenarios where frequent maintenance is available, and MA350 is suitable for research purposes with post-processing applicable. The study highlights the importance of assigning portable BC monitors to appropriate applications and the need for optimized real-time compensation algorithms.

Unraveling Ammonia and Trimethylamine Uptake on Conductive Doped Polyaniline

Polyaniline (PAni)-based sensors are a promising solution for ammonia (NH3) detection at the ppb level. However, the nature of the NH3-PAni interaction and underlying drivers remain unclear. This paper proposes to characterize the interaction between doped PAni (dPAni) sensing material and NH3 by using a Knudsen cell. First, to characterize the dPAni interface, the probe-gas method, i.e., titration of surface sites with a gas of specific properties, is deployed. The dPAni interface is found to be homogeneous with more than 96% of surface sites of acid nature or with hydroxyl functional groups. This result highlights that basic gases such as amines might act as interfering gases for NH3 detection by polyaniline-based sensors. Second, the adsorption isotherms of NH3 and trimethylamine (TMA) on dPAni are reported at ambient temperature conditions, 293 K. The uptake of NH3 and TMA on dPAni follows a Langmuir-type behavior. This approach allows for the first time to quantify the uptake of NH3 and TMA on gas-sensor materials and determine typical Langmuir adsorption parameters, i.e., the partitioning coefficient, KLang, and the maximum surface coverage, Nmax. The corresponding values obtained for NH3 and TMA are Klang (NH3) = 19.7 × 10-15 cm3 molecules-1 Nmax (NH3) = 11.6 × 1014 molecules cm-2, KLang (TMA) = 7.0 × 10-15 cm3 molecules-1 Nmax (TMA) = 5.0 × 1014 molecules cm-2. KLang and Nmax values of NH3 are higher than those of TMA, suggesting that NH3 is more efficiently taken up than TMA on dPAni. The results of this work suggest that strong hydrogen bonding drives the performance of a polyaniline-based gas sensor for NH3 and amines. In conclusion, the Knudsen cell approach allows reconsidering the fundamentals of NH3 interactions with dPAni and provides new insights on drivers to enhance sensing properties.

Environmental Quality bOX (EQ-OX): A Portable Device Embedding Low-Cost Sensors Tailored for Comprehensive Indoor Environmental Quality Monitoring

The continuous monitoring of indoor environmental quality (IEQ) plays a crucial role in improving our understanding of the prominent parameters affecting building users' health and perception of their environment. In field studies, indoor environment monitoring often does not go beyond the assessment of air temperature, relative humidity, and CO2 concentration, lacking consideration of other important parameters due to budget constraints and the complexity of multi-dimensional signal analyses. In this paper, we introduce the Environmental Quality bOX (EQ-OX) system, which was designed for the simultaneous monitoring of quantities of some of the main IEQs with a low level of uncertainty and an affordable cost. Up to 15 parameters can be acquired at a time. The system embeds only low-cost sensors (LCSs) within a compact case, enabling vast-scale monitoring campaigns in residential and office buildings. The results of our laboratory and field tests show that most of the selected LCSs can match the accuracy required for indoor campaigns. A lightweight data processing algorithm has been used for the benchmark. Our intent is to estimate the correlation achievable between the detected quantities and reference measurements when a linear correction is applied. Such an approach allows for a preliminary assessment of which LCSs are the most suitable for a cost-effective IEQ monitoring system.

Automation and Computerization of (Bio)sensing Systems

Sensing systems necessitate automation to reduce human effort, increase reproducibility, and enable remote sensing. In this perspective, we highlight different types of sensing systems with elements of automation, which are based on flow injection and sequential injection analysis, microfluidics, robotics, and other prototypes addressing specific real-world problems. Finally, we discuss the role of computer technology in sensing systems. Automated flow injection and sequential injection techniques offer precise and efficient sample handling and dependable outcomes. They enable continuous analysis of numerous samples, boosting throughput, and saving time and resources. They enhance safety by minimizing contact with hazardous chemicals. Microfluidic systems are enhanced by automation to enable precise control of parameters and increase of analysis speed. Robotic sampling and sample preparation platforms excel in precise execution of intricate, repetitive tasks such as sample handling, dilution, and transfer. These platforms enhance efficiency by multitasking, use minimal sample volumes, and they seamlessly integrate with analytical instruments. Other sensor prototypes utilize mechanical devices and computer technology to address real-world issues, offering efficient, accurate, and economical real-time solutions for analyte identification and quantification in remote areas. Computer technology is crucial in modern sensing systems, enabling data acquisition, signal processing, real-time analysis, and data storage. Machine learning and artificial intelligence enhance predictions from the sensor data, supporting the Internet of Things with efficient data management.

RPCA-based techniques for pattern extraction, hotspot identification and signal correction using data from a dense network of low-cost NO2 sensors in London

High-density low-cost air quality sensor networks are a promising technology to monitor air quality at high temporal and spatial resolution. However the collected data is high-dimensional and it is not always clear how to best leverage this information, particularly given the lower data quality coming from the sensors. Here we report on the use of robust Principal Component Analysis (RPCA) using nitrogen dioxide data obtained from a recently deployed dense network of 225 air pollution monitoring nodes based on low-cost sensors in the Borough of Camden in London. RPCA addresses the brittleness of singular value decomposition towards outliers by using a decomposition of the data into low-rank and sparse contributions, with the latter containing outliers. The modal decomposition enabled by RPCA identifies major periodic patterns including spatial and temporal bias, dominant spatial variance, and north-south bias. The five most descriptive components capture 98 % of the data's variance, achieving a compression by a factor of 1500. We present a new technique that uses the sparse part of the data to identify hotspots. The data indicates that at the locations of the top 15 % most susceptible nodes in the network, the model identifies 23 % more hotspots than in all other locations combined. Moreover, the median hotspot event at these at-risk locations exceeds the mean NO2concentration by 33μg/m3. We show the potential of RPCA for signal correction; it corrects random errors yielding a reference signal with R2>0.8. Moreover, RPCA successfully reconstructs missing data from a sensor with R2=0.72 from the rest of the sensor network, an improvement upon PCA of around 50 %, allowing air quality estimations even if a sensor is out of use temporarily.

Enhancing spatial inference of air pollution using machine learning techniques with low-cost monitors in data-limited scenarios

Ensuring environmental justice necessitates equitable access to air quality data, particularly for vulnerable communities. However, traditional air quality data from reference monitors can be costly and challenging to interpret without in-depth knowledge of local meteorology. Low-cost monitors present an opportunity to enhance data availability in developing countries and enable the establishment of local monitoring networks. While machine learning models have shown promise in atmospheric dispersion modelling, many existing approaches rely on complementary data sources that are inaccessible in low-income areas, such as smartphone tracking and real-time traffic monitoring. This study addresses these limitations by introducing deep learning-based models for particulate matter dispersion at the neighbourhood scale. The models utilize data from low-cost monitors and widely available free datasets, delivering root mean square errors (RMSE) below 2.9 μg m-3 for PM1, PM2.5, and PM10. The sensitivity analysis shows that the most important inputs to the models were the nearby monitors' PM concentrations, boundary layer dissipation and height, and precipitation variables. The models presented different sensitivities to each road type, and an RMSE below the regional differences, evidencing the learning of the spatial dependencies. This breakthrough paves the way for applications in various vulnerable localities, significantly improving air pollution data accessibility and contributing to environmental justice. Moreover, this work sets the stage for future research endeavours in refining the models and expanding data accessibility using alternative sources.

Characterization of spatial-temporal distribution and microenvironment source contribution of PM2.5 concentrations using a low-cost sensor network with artificial neural network/kriging techniques

Low-cost sensors (LCS) network is widely used to improve the resolution of spatial-temporal distribution of air pollutant concentrations in urban areas. However, studies on air pollution sources contribution to the microenvironment, especially in industrial and mix-used housing areas, still need to be completed. This study investigated the spatial-temporal distribution and source contributions of PM2.5 in the urban area based on 6-month of the LCS network datasets. The Artificial Neural Network (ANN) was used to calibrate the measured PM2.5 by the LCS network. The calibrated PM2.5 were shown to agree with reference PM2.5 measured by the BAM-1020 with R2 of 0.85, MNE of 30.91%, and RMSE of 3.73 μg/m3, which meet the criteria for hotspot identification and personal exposure study purposes. The Kriging method was further used to establish the spatial-temporal distribution of PM2.5 concentrations in the urban area. Results showed that the highest average PM2.5 concentration occurred during autumn and winter due to monsoon and topographic effects. From a diurnal perspective, the highest level of PM2.5 concentration was observed during the daytime due to heavy traffic emissions and industrial production. Based on the present ANN-based microenvironment source contribution assessment model, temples, fried chicken shops, traffic emissions in shopping and residential zones, and industrial activities such as the mechanical manufacturing and precision metal machining were identified as the sources of PM2.5. The numerical algorithm coupled with the LCS network presented in this study is a practical framework for PM2.5 hotspots and source identification, aiding decision-makers in reducing atmospheric PM2.5 concentrations and formulating regional air pollution control strategies.

Assessing the spatial distribution of odor at an urban waterfront using AERMOD coupled with sensor measurements

Impressions of a place are partly formed by smell. The urban waterfronts often leave a rather poor impression due to odor pollution, resulting in recurring complaints. The nature of such complaints can be subjective and vague, so there is a growing interest in quantitative measurements of emissions to explore the causes of malodorous influence. In the present work, an air quality monitor with an H2S sensor was employed to continuously measure emissions of malodors at 1-min resolution. H2S is often considered to be the predominant odorous substance from sludge and water bodies as it is readily perceptible. The integrated means of concentration from in situ measurements were combined with the AERMOD dispersion model to reveal the spatial distribution of odor concentrations and estimate the extent of odor-prone areas at a daily time step. Year-long observations showed that the diurnal profile exhibits a positively skewed distribution. Meteorology plays a vital role in odor dispersion; the degree of dispersion was explored on a case-by-case basis. There is a greater likelihood of capturing the concentration peaks at night (21:00 to 6:00) as the air is more stable then with less tendency for vertical mixing but favors a horizontal spread. This study indicates that malodors are changeable in time and space and establishes a new approach to using H2S sensor data and resolves a long-standing question about odor in Hong Kong.Implications: this study establishes a new approach combining dispersion model with novel H2S sensor data to understand the characteristics and pattern of odor emanated from the urban waterfront in Hong Kong. The sensor has dynamic concentration range to detect the episodic level of H2S and low level at background conditions. It provides more complete information in relation to odor annoyance, as well as quantitative information useful for odor regulation.

Other's shoes also fit well: AI technologies contribute to China's blue skies as well as carbon reduction

Artificial intelligence (AI) technology represents a disruptive innovation that has garnered significant interest among researchers for its potential applications in ecological and environmental management. While many studies have investigated the impact of AI on carbon emissions, relatively few have delved into its relationship with air pollution. This study sets out to explore the causal mechanisms and constraints linking AI technologies and air pollution, using provincial panel data collected from 2007 to 2020 in China. Furthermore, this study examines the distinct pathways through which AI technology can ameliorate air pollution and reduce carbon emissions. The findings reveal the following key insights: (1) AI technologies have the capacity to significantly reduce air pollution, particularly in terms of PM2.5 and SO2 levels. (2) AI technologies contribute to enhanced air quality by facilitating adjustments in energy structures, improving energy efficiency, and strengthening digital infrastructure. Nonetheless, it is important to note that adjusting the energy structure remains the most practical approach for reducing carbon emissions. (3) The efficacy of AI in controlling air pollution is influenced by geographical location, economic development level, level of information technology development, resource dependence, and public attention. In conclusion, this study proposes novel policy recommendations to offer fresh perspectives to countries interested in leveraging AI for the advancement of ecological and environmental governance.

Fine particulate matter (PM2.5) exposure assessment among active daily commuters to induce behaviour change to reduce air pollution

Fine particulate matter (PM2.5), a detrimental urban air pollutant primarily emitted by traffic and biomass burning, poses disproportionately significant health risks at relatively limited exposure during commuting. Previous studies have mainly focused on fixed locations when assessing PM2.5 exposure, while neglecting pedestrians and cyclists, who often experience higher pollution levels. In response, this research aimed to independently validate the effectiveness of bicycle-mounted low-cost sensors (LCS) adopted by citizens, evaluate temporal and spatial PM2.5 exposure, and assess associated health risks in Ljubljana, Slovenia. The LCS quality assurance results, verified by co-location field tests by air quality monitoring stations (AQMS), showed comparable outcomes with an average percentage difference of 21.29 %, attributed to humidity-induced nucleation effects. The colder months exhibited the highest air pollution levels (μ = 32.31 μg/m3) due to frequent thermal inversions and weak wind circulation, hindering vertical air mixing and the adequate dispersion of pollutants. Additionally, PM2.5 levels in all sampling periods were lowest in the afternoon (μ = 12.09 μg/m3) and highest during the night (μ = 61.00 μg/m3) when the planetary boundary layer thins, leading to the trapping of pollutants near the surface, thus significantly affecting diurnal and seasonal patterns. Analysis of exposure factors revealed that cyclists were approximately three times more exposed than pedestrians. However, the toxicological risk assessment indicated a minimal potential risk of PM2.5 exposure. The collaborative integration of data from official AQMS and LCS can enhance evidence-based policy-making processes and facilitates the realignment of effective regulatory frameworks to reduce urban air pollution.

Evaluating low-cost monitoring designs for PM2.5 exposure assessment with a spatiotemporal modeling approach

Determining the most feasible and cost-effective approaches to improving PM2.5 exposure assessment with low-cost monitors (LCMs) can considerably enhance the quality of its epidemiological inferences. We investigated features of fixed-site LCM designs that most impact PM2.5 exposure estimates to be used in long-term epidemiological inference for the Adult Changes in Thought Air Pollution (ACT-AP) study. We used ACT-AP collected and calibrated LCM PM2.5 measurements at the two-week level from April 2017 to September 2020 (N of monitors [measurements] = 82 [502]). We also acquired reference-grade PM2.5 measurements from January 2010 to September 2020 (N = 78 [6186]). We used a spatiotemporal modeling approach to predict PM2.5 exposures with either all LCM measurements or varying subsets with reduced temporal or spatial coverage. We evaluated the models based on a combination of cross-validation and external validation at locations of LCMs included in the models (N = 82), and also based on an independent external validation with a set of LCMs not used for the modeling (N = 30). We found that the model's performance declined substantially when LCM measurements were entirely excluded (spatiotemporal validation R2 [RMSE] = 0.69 [1.2 μg/m3]) compared to the model with all LCM measurements (0.84 [0.9 μg/m3]). Temporally, using the farthest apart measurements (i.e., the first and last) from each LCM resulted in the closest model's performance (0.79 [1.0 μg/m3]) to the model with all LCM data. The models with only the first or last measurement had decreased performance (0.77 [1.1 μg/m3]). Spatially, the model's performance decreased linearly to 0.74 (1.1 μg/m3) when only 10% of LCMs were included. Our analysis also showed that LCMs located in densely populated, road-proximate areas improved the model more than those placed in moderately populated, road-distant areas.

Emerging sensing, imaging, and computational technologies to scale nano-to macroscale rhizosphere dynamics - Review and research perspectives

The soil region influenced by plant roots, i.e., the rhizosphere, is one of the most complex biological habitats on Earth and significantly impacts global carbon flow and transformation. Understanding the structure and function of the rhizosphere is critically important for maintaining sustainable plant ecosystem services, designing engineered ecosystems for long-term soil carbon storage, and mitigating the effects of climate change. However, studying the biological and ecological processes and interactions in the rhizosphere requires advanced integrated technologies capable of decoding such a complex system at different scales. Here, we review how emerging approaches in sensing, imaging, and computational modeling can advance our understanding of the complex rhizosphere system. Particularly, we provide our perspectives and discuss future directions in developing in situ rhizosphere sensing technologies that could potentially correlate local-scale interactions to ecosystem scale impacts. We first review integrated multimodal imaging techniques for tracking inorganic elements and organic carbon flow at nano- to microscale in the rhizosphere, followed by a discussion on the use of synthetic soil and plant habitats that bridge laboratory-to-field studies on the rhizosphere processes. We then describe applications of genetically encoded biosensors in monitoring nutrient and chemical exchanges in the rhizosphere, and the novel nanotechnology-mediated delivery approaches for introducing biosensors into the root tissues. Next, we review the recent progress and express our vision on field-deployable sensing technologies such as planar optodes for quantifying the distribution of chemical and analyte gradients in the rhizosphere under field conditions. Moreover, we provide perspectives on the challenges of linking complex rhizosphere interactions to ecosystem sensing for detecting biological traits across scales, which arguably requires using the best-available model predictions including the model-experiment and image-based modeling approaches. Experimental platforms relevant to field conditions like SMART (Sensors at Mesoscales with Advanced Remote Telemetry) soils testbed, coupled with ecosystem sensing and predictive models, can be effective tools to explore coupled ecosystem behavior and responses to environmental perturbations. Finally, we envision that with the advent of novel high-resolution imaging capabilities at nano- to macroscale, and remote biosensing technologies, combined with advanced computational models, future studies will lead to detection and upscaling of rhizosphere processes toward ecosystem and global predictions.

Quantification of ambient PM2.5 concentrations adjacent to informal brick kilns in the Vhembe District using low-cost sensors

The widespread exposure to ambient PM2.5 poses a substantial health risk globally, with a more pronounced impact on low- to medium-income nations. This study investigates the spatiotemporal distribution of PM2.5 in the communities hosting informal brickmaking industries in Vhembe District. Utilizing Dylos DC1700, continuous monitoring of PM2.5 was conducted at nine stations adjacent to informal brick kilns from March 2021 to February 2022. The study determined the correction factor for PM2.5 measurements obtained from the Dylos DC1700 when it was collocated with the GRIMM Environmental Dust Monitor 180. Additionally, the diurnal and seasonal variations across monitoring stations were assessed, and potential PM2.5 sources were identified. The study also evaluated the compliance of ambient PM2.5 concentrations across the stations with the South African National Ambient Air Quality Standard (NAAQS) limits. Annual PM2.5 concentrations for the stations ranged from 22.6 to 36.2 μgm-3. Diurnal patterns exhibited peak concentrations in the morning and evening, while seasonal variations showed higher concentrations in winter and lower concentrations in summer and spring. All monitoring stations reported the highest daily exceedance with respect to the daily NAAQS limit in the winter. Major PM2.5 sources included domestic biomass combustion, vehicular emissions, industrial emissions, and construction sites. Well-calibrated low-cost sensors could be employed in suburb regions with scarce air quality data. Findings from the study could be used for developing mitigation strategies to reduce health risks associated with PM2.5 exposure in the area.

AirQo sensor kit: A particulate matter air quality sensing kit custom designed for low-resource settings

Air pollution remains a major public health risk. People living in urban spaces are among those most affected by exposure to unhealthy levels of air pollution. However, many urban spaces especially in low- and middle-income countries lack high resolution and long-term data on the state of air quality. Without high resolution air quality data on the different spaces in a city, citizens and authorities are unable to quantify the challenge and act. This is in part attributed to the high cost of air quality monitoring equipment that are expensive to set up, maintain and not designed for local operating conditions that characterise environments in such contexts. In this paper, we describe AirQo sensor kit, a low-cost sensing hardware system designed for and custom made to work in low-resource settings and outdoor urban environments. We describe the design of the air quality sensing device, 3D-printed enclosure, installation-mount, fabrication and deployment configurations. We demonstrate that the low-cost sensing hardware provides a complete solution comparable to the traditional monitoring system and inspires action to tackle air pollution issues. The sensor kit presented in this paper has been widely deployed in cities in Eastern, Western and Central African countries.

Correlation between air pollution and cognitive impairment among older individuals: empirical evidence from China

BACKGROUND

Little information is available regarding the impact of air pollution on cognitive impairment in older individuals in developing countries. This study empirically tested the impacts of the air quality index (AQI), air pollution intensity (quantified by the number of days of extreme air pollution in a year), and different pollutants on the cognitive abilities of older Chinese individuals.

METHODS

A panel of 28,395 participants spanning 122 cities in 2015 and 2018 was used, based on 3-year follow-up survey data from the China Health and Retirement Longitudinal Study (CHARLS) database. Data from the two phases of the CHARLS microsurvey were combined with relevant statistical data on air pollution in each region in the current year. These two surveys were used to investigate changes in basic health and macro-environmental indicators in older individuals in China, and a mean difference test was conducted. We then reduced the sample selection error by controlling for environmental migration and used two-way fixed and instrumental variable methods for endogenous treatment to avoid the estimation error caused by missing variables.

RESULTS

Air pollution had a significantly negative effect on the cognitive abilities of older individuals (odds ratio [OR]: 1.4633; 95% confidence interval [95% CI]: 1.20899-1.77116). Different pollution intensities(only AQI value is greater than 200 or more) had apparent effects on cognitive impairment, with an OR of approximately 1.0. Sulfur dioxide had significantly negative effects on cognitive ability, with OR of 1.3802 (95% CI: 1.25779-1.51451). Furthermore, air pollution impact analysis showed heterogeneous results in terms of age, sex, education, and regional economic development level. In addition, social adaptability (calculated using social participation, learning, adaptability, and social support) not only had a significant positive effect on the cognitive abilities of older individuals, but also regulated the cognitive decline caused by air pollution.

CONCLUSIONS

Air pollution affects cognitive impairment in older individuals, especially in those with lower education levels, and living in economically underdeveloped areas. This effect is synchronous and has a peak at an AQI of > 200.

Assessment of air pollution tolerance and anticipated performance index of roadside trees in urban and semi-urban regions

Rapid urbanization and rising vehicular population are the main precursors in increasing air pollutants concentration which negatively influences the surrounding ecosystem. Roadside plants are frequently used as the barrier against traffic emissions to minimize the effects of air pollution. They are, however, vulnerable to various contaminants, and their tolerance capacity varies. This necessitates a scientific inquiry into the role of roadside plantations in improved urban sprawl planning and management, where chosen trees could be cultivated to reduce air pollution. The present study assesses biochemical and physiological characteristics to evaluate the air pollution tolerance index (APTI) in Ranchi, Jharkhand. The anticipated performance index (API) was assessed based on calculated APTI and socioeconomic characteristics of a selected common tree species along the roadside at different sites. According to APTI, Mangifera indica and Eugenia jambolana were the most tolerant species throughout all the sites, while Ficus benghalensis and Ficus religiosa were intermediately tolerant towards air pollution. The one-way ANOVA shows no significant variation in APTI throughout all the sites. The regression plot shows the positive correlation of APTI with ascorbic acid among all the parameters. According to API, the Mangifera indica, Eugenia jambolana Ficus religiosa and Ficus benghalensis were excellent and best performers among all the sites. So, the air pollution-resistant tree species can be recommended for roadside plantations for the development of green belt areas in urban regions.

Towards sustainable and net-zero cities: A review of environmental modelling and monitoring tools for optimizing emissions reduction strategies for improved air quality in urban areas

Climate change is a defining challenge for today's society and its consequences pose a great threat to humanity. Cities are major contributors to climate change, accounting for over 70% of global greenhouse gas emissions. With urbanization occurring at a rapid rate worldwide, cities will play a key role in mitigating emissions and addressing climate change. Greenhouse gas emissions are strongly interlinked with air quality as they share emission sources. Consequently, there is a great opportunity to develop policies which maximize the co-benefits of emissions reductions on air quality and health. As such, a narrative meta-review is conducted to highlight state-of-the-art monitoring and modelling tools which can inform and monitor progress towards greenhouse gas emission and air pollution reduction targets. Urban greenspace will play an important role in the transition to net-zero as it promotes sustainable and active transport modes. Therefore, we explore advancements in urban greenspace quantification methods which can aid strategic developments. There is great potential to harness technological advancements to better understand the impact of greenhouse gas reduction strategies on air quality and subsequently inform the optimal design of these strategies going forward. An integrated approach to greenhouse gas emission and air pollution reduction will create sustainable, net-zero and healthy future cities.

Enhancing the reliability of particulate matter sensing by multivariate Tobit model using weather and air quality data

Low-cost particulate matter (PM) sensors have been widely used following recent sensor-technology advancements; however, inherent limitations of low-cost monitors (LCMs), which operate based on light scattering without an air-conditioning function, still restrict their applicability. We propose a regional calibration of LCMs using a multivariate Tobit model with historical weather and air quality data to improve the accuracy of ambient air monitoring, which is highly dependent on meteorological conditions, local climate, and regional PM properties. Weather observations and PM2.5 (fine inhalable particles with diameters ≤ 2.5 μm) concentrations from two regions in Korea, Incheon and Jeju, and one in Singapore were used as training data to build a visibility-based calibration model. To validate the model, field measurements were conducted by an LCM in Jeju and Singapore, where R2 and the error after applying the model in Jeju improved (from 0.85 to 0.88) and reduced by 44% (from 8.4 to 4.7 μg m-3), respectively. The results demonstrated that regional calibration involving air temperature, relative humidity, and other local climate parameters can efficiently correct the bias of the sensor. Our findings suggest that the proposed post-processing using the Tobit model with regional weather and air quality data enhances the applicability of LCMs.

Calibration Assessment of Low-Cost Carbon Dioxide Sensors Using the Extremely Randomized Trees Algorithm

As the monitoring of carbon dioxide is an important proxy to estimate the air quality of indoor and outdoor environments, it is essential to obtain trustful data from CO₂ sensors. However, the use of widely available low-cost sensors may imply lower data quality, especially regarding accuracy. This paper proposes a new approach for enhancing the accuracy of low-cost CO₂ sensors using an extremely randomized trees algorithm. It also reports the results obtained from experimental data collected from sensors that were exposed to both indoor and outdoor environments. The indoor experimental set was composed of two metal oxide semiconductors (MOS) and two non-dispersive infrared (NDIR) sensors next to a reference sensor for carbon dioxide and independent sensors for air temperature and relative humidity. The outdoor experimental exposure analysis was performed using a third-party dataset which fit into our goals: the work consisted of fourteen stations using low-cost NDIR sensors geographically spread around reference stations. One calibration model was trained for each sensor unit separately, and, in the indoor experiment, it managed to reduce the mean absolute error (MAE) of NDIR sensors by up to 90%, reach very good linearity with MOS sensors in the indoor experiment (r² value of 0.994), and reduce the MAE by up to 98% in the outdoor dataset. We have found in the outdoor dataset analysis that the exposure time of the sensor itself may be considered by the algorithm to achieve better accuracy. We also observed that even a relatively small amount of data may provide enough information to perform a useful calibration if they contain enough data variety. We conclude that the proper use of machine learning algorithms on sensor readings can be very effective to obtain higher data quality from low-cost gas sensors either indoors or outdoors, regardless of the sensor technology.

Gas-Phase Interaction of CO, CO2, H2S, NH3, NO, NO2, and SO2 with Zn12O12 and Zn24 Atomic Clusters

Atmospheric pollutants pose a high risk to human health, and therefore it is necessary to capture and preferably remove them from ambient air. In this work, we investigate the intermolecular interaction between the pollutants such as CO, CO₂, H₂S, NH₃, NO, NO₂, and SO₂ gases with the Zn₂₄ and Zn₁₂O₁₂ atomic clusters, using the density functional theory (DFT) at the meta-hybrid functional TPSSh and LANl2Dz basis set. The adsorption energy of these gas molecules on the outer surfaces of both types of clusters has been calculated and found to have a negative value, indicating a strong molecular-cluster interaction. The largest adsorption energy has been observed between SO₂ and the Zn₂₄ cluster. In general, the Zn₂₄ cluster appears to be more effective for adsorbing SO₂, NO₂, and NO than Zn₁₂O₁₂, whereas the latter is preferable for the adsorption of CO, CO₂, H₂S, and NH₃. Frontier molecular orbital (FMO) analysis showed that Zn₂₄ exhibits higher stability upon adsorption of NH₃, NO, NO₂, and SO₂, with the adsorption energy falling within the chemisorption range. The Zn₁₂O₁₂ cluster shows a characteristic decrease in band gap upon adsorption of CO, H₂S, NO, and NO₂, suggesting an increase in electrical conductivity. Natural bond orbital (NBO) analysis also suggests the presence of strong intermolecular interactions between atomic clusters and the gases. This interaction was recognized to be strong and noncovalent, as determined by noncovalent interaction (NCI) and quantum theory of atoms in molecules (QTAIM) analyses. Overall, our results suggest that both Zn₂₄ and Zn₁₂O₁₂ clusters are good candidate species for promoting adsorption and, thus, can be employed in different materials and/or systems for enhancing interaction with CO, H₂S, NO, or NO₂.

Health Research in the Wake of Disasters: Challenges and Opportunities for Sensor Science

BACKGROUND

Disaster events adversely affect the health of millions of individuals each year. They create exposure to physical, chemical, biological, and psychosocial hazards while simultaneously exploiting community and individual-level vulnerabilities that allow such exposures to exert harm. Since 2013, the National Institute of Environmental Health Sciences (NIEHS) has led the development of the Disaster Research Response (DR2) program and infrastructure; however, research exploring the nature and effects of disasters on human health is lacking. One reason for this research gap is the challenge of developing and deploying cost-effective sensors for exposure assessment during disaster events.

OBJECTIVES

The objective of this commentary is to synergize the consensus findings and recommendations from a panel of experts on sensor science in support of DR2.

METHODS

The NIEHS convened the workshop, "Getting Smart about Sensors for Disaster Response Research" on 28 and 29 July 2021 to discuss current gaps and recommendations for moving the field forward. The workshop invited full discussion from multiple viewpoints, with the goal of identifying recommendations and opportunities for further development of this area of research. The panel of experts included leaders in engineering, epidemiology, social and physical sciences, and community engagement, many of whom had firsthand experience with DR2.

DISCUSSION

The primary finding of this workshop is that exposure science in support of DR2 is severely lacking. We highlight unique barriers to DR2, such as the need for time-sensitive exposure data, the chaos and logistical challenges that ensue from a disaster event, and the lack of a robust market for sensor technologies in support of environmental health science. We highlight a need for sensor technologies that are more scalable, reliable, and versatile than those currently available to the research community. We also recommend that the environmental health community renew efforts in support of DR2 facilitation, collaboration, and preparedness. https://doi.org/10.1289/EHP12270.

Representativeness of the particulate matter pollution assessed by an official monitoring station of air quality in Santiago, Chile: projection to human health

Santiago, capital city of Chile, presents air pollution problems for decades mainly by particulate matter, which significantly affects population health, despite national authority efforts to improve air quality. Different properties of the particulate matter (PM₁₀, PM_2.5 and PM₁ fractions, particle surface and number) were measured with an optical spectrometer. The sampling was done during spring 2019 at different sites within the official representative area of Independencia monitoring station (ORMS-IS). The results of this study evidence large variations in PM mass concentration at small-scale areas within the ORMS-IS representative zone, which reports the same value for the total area. Results from PM properties such as PM₁, particle number and particle surface distribution show that these properties should be incorporated in regular monitoring in order to improve the understanding of the effects of these factors on human health. The use of urban-climate canopy-layer models in a portion of the sampled area around the monitoring station demonstrates the influence of street geometry, building densities and vegetation covers on wind velocity and direction. These factors, consequently, have an effect on the potential for air pollutants concentrations. The results of this study evidence the existence of hot spots of PM pollution within the area of representativeness of the ORMS-IS. This result is relevant from the point of view of human health and contributes to improve the effectiveness of emission reduction policies.

End-user perspective of low-cost sensors for urban stormwater monitoring: a review

The large-scale deployment of low-cost monitoring systems has the potential to revolutionize the field of urban hydrology monitoring, bringing improved urban management, and a better living environment. Even though low-cost sensors emerged a few decades ago, versatile and cheap electronics like Arduino could give stormwater researchers a new opportunity to build their own monitoring systems to support their work. To find out sensors which are ready for low-cost stormwater monitoring systems, for the first time, we review the performance assessments of low-cost sensors for monitoring air humidity, wind speed, solar radiation, rainfall, water level, water flow, soil moisture, water pH, conductivity, turbidity, nitrogen, and phosphorus in a unified metrological framework considering numerous parameters. In general, as these low-cost sensors are not initially designed for scientific monitoring, there is extra work to make them suitable for in situ monitoring, to calibrate them, to validate their performance, and to connect them with open-source hardware for data transmission. We, therefore, call for international cooperation to develop uniform low-cost sensor production, interface, performance, calibration and system design, installation, and data validation guides which will greatly regulate and facilitate the sharing of experience and knowledge.

Building and optimising an automatic monitoring system network for outdoor PM2.5: a case study of Ho Chi Minh City

PM2.5 exposure data are important for air quality management. Optimal planning and determination of locations where PM2.5 is continuously monitored are important for urban areas in Ho Chi Minh City (HCMC), a megacity with specific environmental problems. Objectives of the study to propose an automatic monitoring system network (AMSN) to measure outdoor PM2.5 concentrations in HCMC using low-cost sensors. Data related to the current monitoring network, population, population density, threshold reference standards set by the National Ambient Air Quality Standard (NAAQS) and the World Health Organisation (WHO), and inventory emissions from various sources, both anthropogenic and biogenic, were obtained. Coupled WRF/CMAQ models were used to simulate PM2.5 concentrations in HCMC. The simulation results were extracted from the grid cells, from which the values of points exceeding the set thresholds were determined. The population coefficient was calculated to determine the corresponding total score (TS). Optimisation of the monitoring locations was statistically performed using Student's t-test to select the official locations for the monitoring network. TS values ranged from 0.0031 to 3215.9. The TSmin value was reached in the Can Gio district and the TSmax value was reached in SG1. Based on the t-test results, 26 initial locations were proposed for a preliminary configuration, from which 10 optimal monitoring sites were selected to develop the AMSN of outdoor PM2.5 concentration measurements in HCMC towards 2025.