Soil pollution at a major West African E-waste recycling site: Contamination pathways and implications for potential mitigation strategies

Decabromodifenyl Ether (BDE-209) in Surface Soils from Warsaw and Surrounding Areas: Characterization of Non-Carcinogenic Risk Associated with Oral and Dermal Exposure

Polybrominated diphenyl ethers (PBDEs) have been used for many years as flame retardants. Due to their physicochemical and toxicological properties, they are considered to be persistent organic pollutants (POPs). BDE-209 is the main component of deca-BDE, the one PBDE commercial mixture currently approved for use in the European Union. The aim of this study was to analyse BDE-209 in surface soil samples from Warsaw and surrounding areas (Poland) as an indicator of environmental pollution with PBDEs, and to characterise the associated health risk. A total of 40 samples were analysed using gas chromatography with electron capture detection (GC-µECD). Concentrations of BDE-209 in soil ranged from 0.4 ng g-1 d.w. (limit of quantification) to 158 ng g-1 d.w. Overall, 52.5% of results were above the method's limit of quantification. The highest levels were found at several locations with heavy traffic and in the vicinity of a CHP plant in the city. The lowest concentrations were observed in most of the samples collected from low industrialized or green areas (<0.4 to 1.68 ng g-1 d.w.). Exposure to BDE-209 was estimated for one of the most sensitive populations, i.e., young children. The following exposure routes were selected: oral and dermal. No risk was found to young children's health.

Tourmaline-enhanced bioremediation of Cd/BDE-153 co-contaminated soil: Migration, soil microorganism structure and enzyme activities

The efficient remediation of the soil co-contaminated with heavy metals and polybrominated diphenyl ethers (PBDEs) from electronic disassembly zones is a new challenge. Here, we screened a fungus of F. solani (F.s) can immobilize Cd and remove PBDEs. wIt combined with tourmaline enhances the remediation of co- pollutants in the soil. Furthermore, the environment risks of the enhanced technology were assessed through the amount of Cd/BDE-153 in Amaranthus tricolor L. (amaranth) migrated from soil, as well as the changes of soil microorganism communities and enzyme activities. The results showed the combined treatment of tourmaline and F.s made the removal percentage of BDE-153 in rhizosphere soil co-contaminated with BDE-153 and Cd reached 46.5%. And the weak acid extractable Cd in rhizosphere soil decreased by 33.7% compared to control group. In addition, the combined remediation technology resulted in a 32.5% (22.8%), 45.5% (37.2%), and 50.7% (38.1%) decrease in BDE-153 (Cd) content in the roots, stems, and leaves of amaranth, respectively. Tourmaline combined with F.s can significantly increase soil microorganism diversity, soil dehydrogenase and urease activities, further improving the remediation rate of Cd and BDE-153co-pollutants in soil and the biomass of amaranth. This study provides the remediation technology of soil co-contaminated with heavy metal and PBDEs and ensure the maintenance of food security.

Systematic literature review of heavy metal contamination of the Nigerian environment from e-waste management: Associated health and carcinogenic risk assessment

E-waste -the aftermath of large amount of electrical and electronic equipment ferried into Africa from which Nigeria receives a significant chunk, is composed of components known to be hazardous to health. Composition of series of heavy metals (HMs) in e-waste is traceable to many health conditions including cancer which is hitherto incompletely understood. This study harmonizes primary data on HMs from e-waste in different Nigerian environmental media including the air, soil, surface dust, water and plant. We estimated the possible health implications, single and aggregative soil and water pollution indices both in adult and children categories, carcinogenic and non-carcinogenic risks secondary to HM exposure and mapped out the possible mechanism of carcinogenesis. Analysis showed that soil, water, surface dust and plant matrices in Nigerian environment are variedly but considerably contaminated with combination of HMs. The significantly high values of the hazard quotient and hazard index of both water and surface dust matrices are indicative of adverse health effect of the non-carcinogenic risk. The highest HQ is generated by Pb and Cr through dermal exposure to soil and surface dust with mean values of 1718.48, 1146.14, 1362.10 and 1794.61 respectively among Nigerian children followed by the oral exposure. This pattern of observation is similar to that obtained for adult category. HI due to Pb and Cr in soil constitutes the highest HI (2.05E+03 and 1.18E+03 respectively) followed by surface dust. However, this study precipitates the observation that children are more at health risk than adults in contaminated environment. Carcinogenic risk also follows the same pattern of expression in the Nigerian environment. We conclude that exposure to e-waste poses significant carcinogenic and non-carcinogenic health risks and the induction of toxicity may be mediated via DNA damage, oxidative stress and inflammatory/immune cells dysfunction in Nigerian environment.

Emerging environmental contaminants: Sources, effects on biodiversity and humans, remediation, and conservation implications

Ecosystems, biodiversity, and the human population all depend on a quality or uncontaminated environment. Quality environment provides people and wildlife access to nutrition, medications, dietary supplements, and other ecosystem services. The conservation of biodiversity-that is, species richness, abundance, heredities, and diversity-as well as the control of climate change are facilitated by such an uncontaminated environment. However, these advantages are jeopardized by newly emerging environmental chemical contaminants (EECCs) brought on by increased industrialization and urbanization. In developing countries, inadequate or poor environmental policies, infrastructure, and national standards concerning the usage, recycling, remediation, control, and management of EECCs hasten their effects. EECCs in these countries negatively affect biodiversity, ecological services and functions, and human health. This review reveals that the most deprived or vulnerable local communities in developing countries are those residing near mining or industrial areas and cultivating their crops and vegetables on contaminated soils, as is wildlife that forages or drinks in EECC-contaminated water bodies. Yet, people in these countries have limited knowledge about EECCs, their threats to human well-being, ecosystem safety, and the environment, as well as remediation technologies. Besides, efforts to efficiently control, combat, regulate, and monitor EECCs are limited. Thus, the review aims to increase public knowledge concerning EECCs in developing countries and present a comprehensive overview of the current status of EECCs. It also explores the sources and advancements in remediation techniques and the threats of EECCs to humans, ecosystems, and biodiversity.

Unveiling the distribution characteristics of rpf-like genes and indigenous resuscitation promoting factor production in PCB-contaminated soils

Resuscitation promoting factors (Rpfs), known for their anti-dormancy cytokine properties, have been extensively investigated in the medical field. Although the Rpf from Micrococcus luteus has been successfully utilized to resuscitate and stimulate microbial populations for the degradation of polychlorinated biphenyls (PCBs), the presence of indigenous Rpf homologs in PCB-contaminated soils has not been established. In this study, the distribution characteristics of rpf-like genes and indigenous strain capable of producing Rpf in PCB-contaminated soils were explored. The results revealed the widespread presence of Rpf-like domains and their associated genes, particularly in close association with heavy metals and PCBs. The rpf-like genes were predominantly found in Proteobacteria and displayed a positive correlation with genes involved in PCB degradation and viable but non-culturable (VBNC) formation. Notably, the recombinant Rpf-Ac protein derived from the indigenous strain Achromobacter sp. HR2 exhibited muralytic activity and demonstrated significant efficacy in resuscitating the growth of VBNC cells, while also stimulating the growth of normal cells. These findings shed light on the prevalent presence of Rpf homologs in PCB-contaminated soils and their potential to resuscitate functional populations in the VBNC state, thereby enhancing in situ bioremediation.

Simultaneous targeted and non-targeted analysis of plastic-related contaminants in e-waste impacted soil in Agbogbloshie, Ghana

An LC-MS based analytical method was developed and validated for the simultaneous targeted analysis and suspect screening of plastic-related contaminants in e-waste impacted soils. Satisfactory recoveries (97 ± 13 %) were achieved using ultrasound-assisted extraction for 14/15 of the targeted analytes (7 bisphenols and 8 plasticizers) in a range of agricultural and non-agricultural soils. The method was applied to 53 soil samples collected in May 2015 in the region of Agbogbloshie (Ghana) at e-waste facilities (incl. Dump, trade, and burn sites), neighboring non-agricultural (incl. upstream, downstream, and community) and agricultural fields, and at two control agricultural sites away from e-waste recycling facilities. Bisphenol A (BPA) and bis(2-ethylhexyl) phthalate (DEHP) were the two dominant contaminants in e-waste soil (with concentrations up to 48.7 and 184 μg g-1, respectively), especially at the trade site, where e-waste was sorted and dismantled. The non-targeted workflow was successfully applied to identify additional plastic-related contaminants previously unreported in e-waste impacted soils, including bis(2-propylheptyl) phthalate, diisononyl phthalate, trioctyl trimellitate, 4-dodecylbenzenesulfonic acid, perfluorooctanesulfonic acid, perfluorobutanesulfonic acid, diphenyl phosphate, and triethylene glycol monobutyl ether. The agricultural soils surrounding the e-waste sites were also contaminated by plastic-related chemicals (especially DEHP), highlighting the impact of e-waste activities on the surrounding agricultural system.

Unveiling the PCB biodegradation potential and stress survival strategies of resuscitated strain Pseudomonas sp. HR1

The exploration of resuscitated strains, facilitated by the resuscitation promoting factor (Rpf), has substantially expanded the pool of cultivated degraders, enhancing the screening of bio-inoculants for bioremediation applications. However, it remains unknown whether these resuscitated strains can re-enter the viable but non-culturable (VBNC) state and the specific stress conditions that trigger such a transition. In this work, the whole genome, and polychlorinated biphenyl (PCB)-degrading capabilities of a resuscitated strain HR1, were investigated. Notably, the focus of this exploration was on elucidating whether HR1 would undergo a transition into the VBNC state when exposed to low temperature and PCBs, with and without the presence of heavy metals (HMs). The results suggested that the resuscitated strain Pseudomonas sp. HR1 harbored various functional genes related to xenobiotic biodegradation, demonstrating remarkable efficiency in Aroclor 1242 degradation and strong resistance against stress induced by low temperature and PCBs. Nevertheless, when exposed to the combined stress of low temperature, PCBs, and HMs, HR1 underwent a transition into the VBNC state. This transition was characterized by significant decreases in enzyme activities and notable changes in both morphological and physiological traits when compared to normal cells. Gene expression analysis revealed molecular shifts underlying the VBNC state, with down-regulated genes showed differential expression across multiple pathways and functions, including oxidative phosphorylation, glycolysis, tricarboxylic acid cycle, amino acid metabolism, translation and cytoplasm, while up-regulated genes predominantly associated with transcription regulation, membrane function, quorum sensing, and transporter activity. These findings highlighted the great potential of resuscitated strains as bio-inoculants in bioaugmentation and shed light on the survival mechanisms of functional strains under stressful conditions, which should be carefully considered during bioremediation processes.

Modelling of soil environmental quality and early warning of integrated ecological risk

The knowledge of dynamic trend in soil heavy metal contamination and associated risk is important for soil pollution prevention, safe utilization and early warning of soil environmental quality and ecological risk. In this study, a modified integrated risk index (NIRI) was adopted to evaluate ecological risk in agricultural soil in Wenzhou with 70 samples, which is located in the southeast of China. In addition, two scenarios with different metal fluxes (optimistic and default scenario) were constructed to predict future dynamic trend of metal concentrations. Results showed the agricultural soil was mainly contaminated by Cd and Pb. The NIRI indicated moderate to considerable risk in most sites and Cd posed the greatest contribution to NIRI value. Besides, higher risk was determined in paddy soil than that in vegetable. Scenario simulation results revealed general declining trend in optimistic scenario while increasing trend in default scenario for metal concentration. However, exceedance varied with prediction period, soil types and metals. Ecological risk probability showed similar trend with metal concentration, indicating significant shift to higher risk level in default scenario while insignificant decrease in optimistic scenario. The proposed scenario simulation results provide reference to support soil quality improvement and risk management.

Assessment of legacy and alternative halogenated organic pollutants in outdoor dust and soil from e-waste sites in Nigeria: Concentrations, patterns, and implications for human exposure

E-waste is often processed informally, particularly in developing countries, resulting in the release of harmful chemicals into the environment. This study investigated the co-occurrence of selected persistent organic pollutants (POPs), including legacy and alternative halogenated flame retardants (10 polybrominated diphenyl ethers (PBDEs), decabromodiphenyl ethane (DBDPE), syn and anti-dechlorane plus (DP)), 32 polychlorinated biphenyls (PCBs) and 12 organochlorine pesticides (OCPs), in 20 outdoor dust and 49 soil samples from 7 e-waste sites in Nigeria. This study provides the first report on alternative flame retardants (DBDPE and DP) in Nigeria. The total concentration range of the selected classes of compounds was in the order: ∑10PBDEs (44-12300 ng/g) > DBDPE (4.9-3032 ng/g) > ∑2DP (0.7-278 ng/g) > ∑32PCBs (4.9-148 ng/g) > ∑12OCPs (1.9-25 ng/g) for dust, and DBDPE (4.9-9647 ng/g) > ∑10PBDEs (90.3-7548 ng/g) > ∑32PCBs (6.1-5025 ng/g) > ∑12OCPs (1.9-250 ng/g) > ∑2DP (2.1-142 ng/g) for soil. PBDEs were the major contributors to POP pollution at e-waste dismantling sites, while PCBs were the most significant contributors at e-waste dumpsites. DBDPE was found to be significantly associated with pollution at both e-waste dismantling and dumpsites. Estimated daily intake (EDI) via dust and soil ingestion and dermal adsorption routes ranged from 1.3 to 2.8 ng/kg bw/day and 0.2-2.9 ng/kg bw/day, respectively. In the worst-case scenario, EDI ranged from 2.9 to 10 ng/kg bw/day and 0.8-5.8 ng/kg bw/day for dust and soil, respectively. The obtained intake levels posed no non-carcinogenic risk, but could increase the incidence of cancer at some of the studied e-waste sites, with values exceeding the USEPA cancer risk lower limit (1.0 × 10-6). Overall, our results suggest that e-waste sites act as emission point sources of POPs.

A review of heavy metal risks around e-waste sites and comparable municipal dumpsites in major African cities: Recommendations and future perspectives

In Africa, the effects of informal e-waste recycling on the environment are escalating. It is regularly transported from developed to developing nations, where it is disassembled informally in search of precious metals, thus increasing human exposure to harmful compounds. Africa has a serious problem with e-waste, as there are significant facilities in Ghana and Nigeria where imported e-waste is unsafely dismantled. however, because they are in high demand and less expensive than new ones, old electronic and electrical items are imported in large quantities, just like in many developing nations. After that, these objects are frequently scavenged to recover important metals through heating, burning, incubation in acids, and other techniques. Serious health hazards are associated with these activities for workers and individuals close to recycling plants. At e-waste sites in Africa, there have been documented instances of elevated concentrations of hazardous elements, persistent organic pollutants, and heavy metals in dust, soils, and vegetation, including plants consumed as food. Individuals who handle and dispose of e-waste are exposed to highly hazardous chemical substances. This paper examines heavy metal risks around e-waste sites and comparable municipal dumpsites in major African cities. Elevated concentrations of these heavy metals metal in downstream aquatic and marine habitats have resulted in additional environmental impacts. These effects have been associated with unfavourable outcomes in marine ecosystems, such as reduced fish stocks characterized by smaller sizes, increased susceptibility to illness, and decreased population densities. The evidence from the examined studies shows how much e-waste affects human health and the environment in Africa. Sub-Saharan African nations require a regulatory framework that includes specialized laws, facilities, and procedures for the safe recycling and disposal of e-waste.

Sources of polychlorinated biphenyls (PCBs) in sediments of the East China marginal seas: Role of unintentionally-produced PCBs

The production and use of intentionally-produced polychlorinated biphenyls (PCBs) in China have a short history compared with countries of North America and Europe, where technical PCB mixtures were manufactured in large amounts for decades before being banned. Unintentionally-produced PCB emissions increased dramatically in China, leading to unique profiles of PCB burdens. This study first time evaluated 208 individual PCB congeners at 94 sites from surface sediments of the East China Marginal Seas (ECMSs) and explored their sources. Non-technical PCBs transported from atmospheric transport and river discharge played a dominant role in most areas of the ECMSs, while historical residuals of technical PCBs occupied the fine-grained sediments in muddy areas of the central Yellow Sea (YS), regarding to the low sedimentation rate in the central YS. Furthermore, emissions from Taizhou located on the coast of the East China Sea (ECS), which is an important electronic waste dismantling site in East China, contributed additional technical PCBs to the inner shelf of the ECS. Our results indicate that non-technical PCBs have become the dominant PCB species in the ECMSs, and emphasize the synergistic effects of large riverine input, long-range atmospheric transport, and muddy shelf deposition on PCB source and sink of in marginal seas.

Industrial impact on sustainable dairy farms: Essential elements, hazardous metals and polycyclic aromatic hydrocarbons in forage and cow's milk

Sustainable dairy farms are characterised by the self-production of forage for animal feed. These farms are sometimes located near industrial areas, entailing a risk of food chain contamination with hazardous metals and polycyclic aromatic hydrocarbons (PAHs). Accordingly, evaluating the impact of pollution on forage and milk is of great interest. In this study, the effects of industrial factors on sustainable forage from 43 dairy farms and possible correlations between inorganic elements and PAHs were studied. Spearman's correlation and principal component analysis (PCA) were performed for the forage and milk. Most of the inorganic elements in the forage were below the maximum residual limits for cadmium (Cd) and lead (Pb), established in EU 2013/1275 and EU 2019/1869, respectively. However, arsenic (As) and mercury (Hg) levels were above their respective limits in the forage (EU 2019/1869). No milk samples exceeded the maximum residual limits for Pb (EU 488/2014) or Cd (EU 1881/2006) in dairy products. Heavy-weight PAHs (HW-PAHs, four or more aromatic rings) were detected in forage but not in milk. In the forage samples, HW-PAHs were positively correlated with Zn and Cd. In addition, some hazardous metals (chromium (Cr), iron (Fe), As, Hg, and Pb) also were positively correlated with Zn and Cd. Interestingly, no correlations were found between forage pollutants and milk, suggesting that these pollutants have a low transfer rate to milk. The PCA results highlighted the predominant contribution of PAHs to the global variance in forage samples collected at different distances from industrial areas. In milk, the contributions of hazardous metals and PAHs were more balanced than in forages. Finally, when distances to potential pollution sources were included in the PCA of forage samples, a negative correlation was observed between the former and the concentrations of HW-PAHs, Cd, and Zn, suggesting that thermal power plants and steel factory emissions were the main sources of polluting forage in this area.

Soil heavy metal pollution from waste electrical and electronic equipment of repair and junk shops in southern Thailand and their ecological risk

The waste electrical and electronic equipment (WEEE) stream in Thailand shifted from exporting WEEE to recycling them in domestic enterprises after China's import restrictions on e-waste in 2018. This study aims to investigate the pollution status, pollution sources, and ecological risk of heavy metals from manual WEEE dismantling facilities (12 repair shops and 8 junk shops) in the Nakhon Si Thammarat province of southern Thailand by examining the concentrations of As, Cd, Ni, and Pb in the topsoil (0-15 cm) during the wet and dry seasons. The results revealed that the mean concentrations of all heavy metals were higher during the dry season than in the wet season. The concentrations of analyzed soil heavy metals decreased as the intensity of e-waste dismantling activities increased, with recycling sites > repair sites > control sites (no e-waste recycling activities). Only 10% of WEEE processing workshops (junk shops) had soil Pb and As concentrations that exceeded Thailand's residential soil quality standards. However, ecological indexing models based on the geo-accumulation index found that 75% of electric repair shops were contaminated with the analyzed heavy metals, particularly Pb. Moreover, the Nemerow integrated pollution index indicated that 16.7% of electric repair shops were on the pollution warning line. Our findings suggest that policymakers should promote ecological risk assessment as a method for mitigating the negative environmental impact of electronic repair businesses, which are widely dispersed in residential areas and tend to dominate the WEEE stream because of the circular economy concept of "right to repair", and highlight the decline of junk shops and e-waste dismantling villages for waste export resulting from China's ban.

Integrated metabolomics, transcriptomics, and proteomics analyses reveal co-exposure effects of polycyclic aromatic hydrocarbons and cadmium on ryegrass (Lolium perenne L.)

Cadmium (Cd) and polycyclic aromatic hydrocarbons (PAHs) are prominent soil contaminants found in industrial sites, and their combined effects on plants are not yet fully understood. To investigate the mechanisms underlying the co-exposure of Cd and PAHs and identify key biomarkers for their co-effects, an integrated analysis of metabolomics, transcriptomics, and proteomics was conducted on ryegrass leaves cultivated in soil. In nontarget metabolomics analysis, nine differentially expressed metabolites that were specifically induced by the compound exposure were identified. When combined with the analysis of differentially expressed genes and proteins, it was determined that the major pathways involved in the response to the co-stress of Cd and PAHs were linoleic acid metabolism and phenylpropanoid biosynthesis. The upregulation of 12,13-dihydroxy-9Z-octadecenoic acid and the downregulation of sinapyl alcohol were identified as typical biomarkers, respectively. Compared to scenarios of single exposures, the compound exposure to Cd and PAHs disrupted the oxidation of linoleic acid, leading to alterations in the profiles of linoleate metabolites. Additionally, it intensified hydroxylation, carboxylation, and methylation processes, and interfered with reactions involving coenzyme A, thus inhibiting lignin production. As a result, oxidative stress was elevated, and the cell wall defense system in ryegrass was weakened. The findings of this study highlight the ecological risks associated with unique biological responses in plants co-exposed to Cd and PAHs in polluted soils.

The unseen world beneath our feet: Heliyon soil science. Exploring the cutting-edge techniques and ambitious goals of modern soil science

In the face of climate change, ecosystem destruction, desertification, and increasing food demand, soil conservation is crucial for ensuring the sustainability of life on Earth. The Soil Section of Heliyon aims to be a platform for basic and applied soil science research, emphasizing the central role of soils and their interactions with human activities. This editorial highlights recent research trends in soil science, including the evolving definition of soil, the multifunctionality of soils and their biodiversity, soil degradation and erosion, the role of soil microflora, advancements in soil mapping techniques, global change and the carbon cycle, soil health, the relationship between soil and buildings, and the importance of considering soil quality in land use planning and policies. The Heliyon Soil Science section seeks to publish scientifically accurate and valuable research that explores the diverse functions of soil and their significance in sustainable land-use systems.

Contamination and risk surveillance of potentially toxic elements in different land-use urban soils of Osogbo, Southwestern Nigeria

The concentrations of potentially toxic elements (PTEs) and their contamination indices were determined in urban soil from five different land-use zones, namely municipal solid waste landfill (MWL), industrial area (INA), heavy traffic area (TRA), residential area with commercial activities (RCA), and farmland (FAL) in Osogbo Metropolis. Ecological and human health risk assessments were also evaluated. Based on the average concentrations, the highest values of As, Cr, Cu, Fe, Mn, Ni, Pb, V, and Zn were found at INA, while the maximum concentrations of Ba, Cd, and Co were observed at MWL. The average enrichment factor (EF) values of Cd, Cu, Pb, and Zn showed very high to extremely high enrichment in the soils of INA, MWL, TRA, and RCA, while the EF values of Ba, Co, Cr, Fe, Ni, and V were significantly to moderately enriched in the aforementioned land-use zones. This trend was consistent with the average contamination factor (Cf) values of Cd, Cu, Pb, and Zn, which indicated considerable to very high contamination at INA, MWL, TRA, and RCA. However, Cf values of Ba, Co, Cr, Fe, Ni, and V had moderate contamination variously at the different land-use zones. Furthermore, the potential ecological risk factor (Eri) values for all the PTEs were < 40, which indicated low Eri, except for Cd and to some extent Pb. The Eri value of Cd was high to very high at MWL, INA, TRA, and RCA, and low at FAL, while Eri of Pb was only moderate at INA. Assessment of health quotient (HQ) of non-carcinogenic health risks was within acceptable limit (< 1) for most of the PTEs in the different zones for adults and children, except the maximum HQ value of Pb at INA (HQ = 1.0), which was beyond the acceptable limit for children. The carcinogenic risk was within the acceptable limit (1.0 × 10-6) in all the zones, except INA. This may pose health challenges to children in the vicinity of the pollution sources. Continuous monitoring of PTEs to reduce exposure to PTE should be considered.

Chlorinated paraffins and dechloranes in free-range chicken eggs and soil around waste disposal sites in Tanzania

Electronic waste is a source of both legacy and emerging flame retardants to the environment, especially in regions where sufficient waste handling systems are lacking. In the present study, we quantified the occurrence of short- and medium chain chlorinated paraffins (SCCPs and MCCPs) and dechloranes in household chicken (Gallus domesticus) eggs and soil collected near waste disposal sites on Zanzibar and the Tanzanian mainland. Sampling locations included an e-waste facility and the active dumpsite of Dar es Salaam, a historical dumpsite in Dar es Salaam, and an informal dumpsite on Zanzibar. We compared concentrations and contaminant profiles between soil and eggs, as free-range chickens ingest a considerable amount of soil during foraging, with potential for maternal transfer to the eggs. We found no correlation between soil and egg concentrations or patterns of dechloranes or CPs. CPs with shorter chain lengths and higher chlorination degree were associated with soil, while longer chain lengths and lower chlorination degree were associated with eggs. MCCPs dominated the CP profile in eggs, with median concentrations ranging from 500 to 900 ng/g lipid weight (lw) among locations. SCCP concentrations in eggs ranged from below the detection limit (LOD) to 370 ng/g lw. Dechlorane Plus was the dominating dechlorane compound in all egg samples, with median concentrations ranging from 0.5 to 2.8 ng/g lw. SCCPs dominated in the soil samples (400-21300 ng/g soil organic matter, SOM), except at the official dumpsite where MCCPs were highest (65000 ng/g SOM). Concentrations of dechloranes in soil ranged from below LOD to 240 ng/g SOM, and the dominating compounds were Dechlorane Plus and Dechlorane 603. Risk assessment of CP levels gave margins of exposure (MOE) close to or below 1000 for SCCPs at one location.

Informal E-waste recycling practices and environmental pollution in Africa: What is the way forward?

Globally, e-waste is the fastest growing and most valuable waste-stream. While countries worldwide are increasingly acknowledging the e-waste problem and introducing policies and regulations that deal with e-waste, large quantities of e-waste still go undocumented. Much of these global e-wastes are accumulating in open-dumpsites and landfills in African-countries where they are recycled informally resulting in significant environmental and public-health concerns. Although, there is a plethora of studies on e-waste management and disposal, only a few-studies have focused on African-countries who are major recipients of e-waste. Moreover, despite the attempts to mitigate the problem of e-waste in African-countries, e-waste has remained a major-concern and there are currently very limited workable solutions. This study examines informal e-waste recycling, environmental pollution and the extent of environmental and health impacts in major countries of concern including Ghana, Nigeria, Egypt, Kenya and South Africa. The global e-waste Waste Atlas Report, 2020 identified these countries as major recipients of e-waste. To achieve the aims of this research, previous studies from 2005 to 2022 are collected from various databases and analyzed. Accordingly, this study focuses on environmental pollution and public-health impacts resulting from e-waste dumping and informal recycling practices, illegal transboundary shipment of e-waste to the selected countries, and the interventions of governments and international organizations in reducing the impact of e-waste pollution and informal recycling practices in Africa. Based on the outcomes of this study, practical approaches on the way-forward are recommended. The findings of this study contribute to a growing-body of research on informal e-waste recycling practices in Africa to document that individuals working within e-waste sites and residents in nearby communities are exposed to a number of toxic-substances, some at potentially concerning levels.

The Spatial Distribution and Potential Risk Assessment of POPs in Farmland around a Typical E-Waste Dismantling Site

Pollution from electronic-waste (E-waste) dismantling is of great concern. This study investigated the concentrations of polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), and polybrominated diphenyl ethers (PBDEs) in 253 cropland soil samples around an abandoned E-waste dismantling site in Taizhou city, Zhejiang province in China, using an analytical method which simultaneously extracted, purified and determined the identity and quantity of the three types of persistent organic pollutants. Meanwhile, their spatial distributions, pollution characteristics, and risk assessments were further analyzed. Total PCBs in the test soils ranged from below method detection limits (ND) to 2985.25 μg kg^-1 on a dry weight basis (d.w.), and the spatial distribution indicated a "hot spot" of PCBs pollution in the study area. The PAHs were detected in all samples with total concentrations ranging from 4.99 to 2723.06 μg kg^-1 d.w. The distribution of PBDEs showed the pollution characteristics of "family-run workshops", with a total content range of ND ~ 899.34 μg kg^-1 d.w., of which BDE209 was typically the dominant congener, accounting for 74.05% of the total PBDEs content in the test soils, with the highest content reaching 857.72 μg kg^-1 d.w. Results showed that the ecological and lifetime carcinogenic risks of PCBs and PAHs were low in the study area, but the health risk caused by oral ingestion and dermal contact accounted for the highest proportion of the total exposure risks, while inhalation could be ignored. PBDEs in soils of the study area were a potential chronic non-carcinogenic risk, particularly for children. Therefore, in order to protect human health and environment, it is necessary to regulate the management of E-waste dismantling sites and pollution control.

Mercury contamination of two e-waste recycling sites in Ghana: an investigation into mercury pollution at Dagomba Line (Kumasi) and Agbogbloshie (Accra)

This study investigated mercury pollution at two e-waste recycling sites in Ghana-Dagomba Line in Kumasi and Agbogbloshie in Accra. A total of 129 soil samples taken at 100 m and 50 m resolutions, respectively, for Dagomba Line and Agbogbloshie, were analysed for mercury using a Zeeman atomic absorption spectrometry. Mercury concentrations from the recycling sites (ranging from 0.11 to 7.57 mg/kg Dagomba Line, and 0.01-4.36 mg/kg at Agbogbloshie) were significantly higher than that of the surrounding areas (0.01-0.17 mg/kg in Kumasi and 0.01-2.18 mg/kg in Accra) and unpolluted control sites (0.05 mg/kg in Kumasi and 0.02 mg/kg in Accra). The dismantling sites at both locations had the highest mercury concentrations. Furthermore, the concentrations were significantly higher at the Dagomba Line site in Kumasi than at Agbogbloshie, even though the Dagomba Line site is relatively recent. The mercury concentrations at both sites exceeded the pollution prevention and abatement level of 0.1 mg/kg. However, the estimated human health risk showed no potential human health effects. Moreover, the mercury concentrations in water and sediment (0.12-7.69 ng/L and 0.02-0.28 ng/L for Dagomba Line and Agbogbloshie, respectively) were below the US EPA standards. Findings from this study show that e-waste recycling can contaminate the topsoil with mercury, irrespective of the scale of the activity.

Valorization of biowastes for clean energy production, environmental depollution and soil fertility

The mother earth is a source of natural resources that, in conjunction with anthropogenic activities, generates a wide spectrum of different biowastes. These biomaterials can be used as low-cost raw feedstock to produce bioenergy, value-added products, and other commodities. However, the improper management and disposal of these biowastes can generate relevant environmental impacts. Consequently, it is imperative to explore alternative technologies for the valorization and exploitation of these wastes to obtain benefits for the society. This review covers different aspects related to valorization of biowastes and their applications in water pollution, soil fertility and green energy generation. The classification and characteristics of different biowastes (biosolids, animal wastes and effluents, plant biomass, wood and green wastes) including their main generation sources are discussed. Different technologies (e.g., pyrolysis, hydrothermal carbonization, anaerobic digestion, gasification, biodrying) for the transformation and valorization of these residues are also analyzed. The application of biowastes in soil fertility, environmental pollution and energy production are described and illustrative examples are provided. Finally, the challenges related to implement low-cost and sustainable biowaste management strategies are highlighted. It was concluded that reliable simulation studies are required to optimize all the logistic stages of management chain of these residues considering the constraints generated from the economic, environmental and social aspects of the biowaste generation sources and their locations. The recollection and sorting of biowastes are key parameters to minimize the costs associated to their management and valorization. Also, the concepts of Industry 4.0 can contribute to achieve a successful commercial production of the value-added products obtained from the biowaste valorization. Overall, this review provides a general outlook of biowaste management and its valorization in the current context of circular economy.

Enhancement of nitrogen fixation and diazotrophs by long-term polychlorinated biphenyl contamination in paddy soil

Biological nitrogen fixation (BNF) driven by diazotrophs is a major means of increasing available nitrogen (N) in paddy soil, in addition to anthropogenic fertilization. However, the influence of long-term polychlorinated biphenyl (PCB) contamination on the diazotrophic community and nitrogen fixation in paddy soil is poorly understood. In this study, samples were collected from paddy soil subjected to > 30 years of PCB contamination, and the soil diazotrophic community and N₂ fixation rate were evaluated by Illumina MiSeq sequencing and acetylene reduction assays, respectively. The results indicated that high PCB contamination increased diazotrophic abundance and the N₂ fixation rate, and altered diazotrophic community structure in the paddy soil. The random forest model demonstrated that the β-diversity of the diazotrophic community was the most significant predictor of the N₂ fixation rate. Structure equation modeling identified a specialized keystone diazotrophic ecological cluster, predominated by Bradyrhizobium, Desulfomonile, and Cyanobacteria, as the key driver of N₂ fixation. Overall, our findings indicated that long-term PCB contamination enhanced the N₂ fixation rate by altering diazotrophic community abundance and structure, which may deepen our understanding of the ecological function of diazotrophs in organic-contaminated soil.

Spatial distribution of polycyclic aromatic hydrocarbons in dust and soils from informal trade sites in southern Nigeria: Implications for risk and source analysis

Polycyclic aromatic hydrocarbons (PAHs) are a group of semi-volatile and persistent organic compounds considered priority pollutants because of their pervasive nature and high toxicity to the ecosystem and humans. Therefore, this study aimed to evaluate the PAH concentrations in dust and soils around informal trade sites (ITS) in Nigeria to determine the level of risk, sources, and significance of these activities to the PAH load of the environment. The 16 US EPA PAHs in dust and soils from ITS were determined by gas chromatography-mass spectrometry (GC-MS). The PAH concentrations in dust from these informal trade sites varied from 120 to 8790, 56 to 4780, and 102-1090 μg kg^-1 for automobile mechanic workshops (AMW), car dismantling (CDS), and material recovery sites (MRS), respectively, whereas those of soils ranged from 3000 to 95,500, 554 to 14,700, and 966-25,200 μg kg^-1 for AMW, CDS, and MRS respectively. The PAH profiles indicated that 3- to 5-ring PAHs were prominent in dust and soils around the ITS. The concentrations of the US EPA 16 PAHs in dust and soils from these ITS showed no correlation with organic matter, while the concentrations of PAH homologues in soils of these ITS showed no correlation with those of dust. Incremental lifetime cancer risk (ILCR) values in the magnitude of 10^-4 to 10¹ were obtained for adult and childhood exposure to PAHs in dust and soils from these ITS. Exposure to PAHs in dust from these ITS gives rise to less risk than for soils. The results indicated that automobile mechanic workshops contribute more PAHs to the environment than car dismantling and material recovery activities. The source analysis showed that the PAH contamination of these sites arises from burning of biomass, plastic materials, and oils, and emissions from vehicles.

Residues of polychlorinated biphenyls (PCBs) in a wild predatory fish from an e-waste site in South China between 2009 and 2016

Crude electronic waste (e-waste) recycling has been banned due to the serious environmental pollution it caused, leaving many abandoned e-waste sites. However, information on the current levels and associated ecological risks of e-waste-derived contaminants such as polychlorinated biphenyls (PCBs) in e-waste site is limited. Wild fish, because they can accumulate high pollutant levels, are suitable indicators for environmental pollution monitoring and has been widely employed as biomonitoring. In this study, we investigated the changes in the levels and profiles of PCBs in a wild fish species, the northern snakehead (Channa argus), before (2009) and after (2016) the ban of crude e-waste recycling from a typical e-waste recycling site in South China. The mean total PCB concentration in the northern snakehead sampled in 2016 (343 ng/g ww) declined by 75% compared with that (1410 ng/g ww) in 2009. The contributions of less chlorinated congeners (tri-CBs and tetra-CBs) in the northern snakehead tended to decrease over the years, indicating that the lighter congeners are more easily eliminated than the heavier ones in the environment. Our findings suggested no fresh PCB input in these years, as well as the positive impacts of laws and regulations on the prohibition of e-waste recycling. The ecological risk assessment suggested that PCB exposure may have median to high risks to the wild fish and fish-eating wildlife that inhabit the e-waste site, even after the ban of crude e-waste recycling activities.

A Future Perspective on Waste Management of Lithium-Ion Batteries for Electric Vehicles in Lao PDR: Current Status and Challenges

Lithium-ion batteries (LIBs) have become a hot topic worldwide because they are not only the best alternative for energy storage systems but also have the potential for developing electric vehicles (EVs) that support greenhouse gas (GHG) emissions reduction and pollution prevention in the transport sector. However, the recent increase in EVs has brought about a rise in demand for LIBs, resulting in a substantial number of used LIBs. The end-of-life (EoL) of batteries is related to issues including, for example, direct disposal of toxic pollutants into the air, water, and soil, which threatens organisms in nature and human health. Currently, there is various research on spent LIB recycling and disposal, but there are no international or united standards for LIB waste management. Most countries have used a single or combination methodology of practices; for instance, pyrometallurgy, hydrometallurgy, direct recycling, full or partial combined recycling, and lastly, landfilling for unnecessary waste. However, EoL LIB recycling is not always easy for developing countries due to multiple limitations, which have been problems and challenges from the beginning and may reach into the future. Laos is one such country that might face those challenges and issues in the future due to the increasing trend of EVs. Therefore, this paper intends to provide a future perspective on EoL LIB management from EVs in Laos PDR, and to point out the best approaches for management mechanisms and sustainability without affecting the environment and human health. Significantly, this review compares the current EV LIB management between Laos, neighboring countries, and some developed countries, thereby suggesting appropriate solutions for the future sustainability of spent LIB management in the nation. The Laos government and domestic stakeholders should focus urgently on specific policies and regulations by including the extended producer responsibility (EPR) scheme in enforcement.

Source apportionment of soil heavy metals: A new quantitative framework coupling receptor model and stable isotopic ratios

Tracing the source of heavy metals in soils is crucial for reversing the worrisome situation of heavy metal contamination. In this study, the origins of heavy metal pollution in soil were examined in a primary electronic waste treatment and disposal hub in China, using a synergistic source apportionment framework consisting of the positive matrix factorization (PMF) model and the Bayesian stable-isotope analysis mixing model (MixSIAR). Industrial activity is significant to heavy metal contamination in both industrial park and farmland soils, however, the contribution varied through PMF model (industrial park, 64.2%; farmland, 35.6%). In the industrial park, Pb was identified as the major pollutant in the soils, and the local children suffered from noncarcinogenic risks. Moreover, the contribution of Pb contamination sources were allocated more accurately (electronic waste dismantling, 25.1%; industrial production, 23.7%; vehicle exhaust from leaded gasoline, 9.1%; vehicle exhaust from unleaded gasoline, 20.2%; natural process, 21.9%) using MixSIAR for the first time. The main soil contaminants in surrounding farmland were Cd, Cu, and Zn. The variations in heavy metal pollution sources in soils were found to be associated with local policies and regulations, such as the phasing out of leaded gasoline and the conversion of industrial park from electronic waste demolition switched to production and storage. The identification of the source of heavy metals in soil will support targeted reduction of the associated emissions, which can immediately help alleviating soil contamination and control human health risks.

Effects of combined pollution of organic pollutants and heavy metals on biodiversity and soil multifunctionality in e-waste contaminated soil

Electronic waste (e-waste) is increasing globally, but the impact of this source of combined pollution on soil biodiversity and multiple soil functions (i.e., ecosystem multifunctionality) remains unclear. Here, we evaluated the effects of combined pollution on the biodiversity and soil multifunctionality using samples collected from upland and paddy soils chronically contaminated with e-waste. Overall biodiversity, as well as the relative abundance and biodiversity of key ecological clusters, as combined pollution concentrations increased in upland soil, while the opposite was true in paddy soil. Soil multifunctionality followed the same trend. Organic pollutants had significant negative effects on soil multifunctionality and were the main influencing factors in upland soil. Heavy metals had significant positive effects on soil multifunctionality in paddy soil. Moreover, driving soil multifunctionality was overall biodiversity in upland soil but key biodiversity in paddy soil. Importantly, a strong positive association between key organism biodiversity and soil multifunctionality was found in soil with low contamination. However, the relationship between key organism biodiversity and soil multifunctionality weakened or disappeared in highly contaminated soil, whereas overall biodiversity was significantly and positively correlated with multifunctionality. Our results emphasized that severe e-waste contamination would reduce soil biodiversity and soil multifunctionality and warrants high attention.

Novel insights into probabilistic health risk and source apportionment based on bioaccessible potentially toxic elements around an abandoned e-waste dismantling site

The study of potentially toxic element (PTE) hazards around e-waste recycling areas has attracted increasing attention but does not consider elemental bioaccessibility. Here, the respiratory and oral bioaccessibilities were incorporated into probabilistic health risk evaluation and source contribution apportionment. The results showed that soil Cd yielded the highest respiratory and oral bioaccessibility, whereas Cr in soils and vegetables attained the lowest oral bioaccessibility. When incorporating metal bioaccessibility into health risk assessment, a 48.3%-55.7% overestimation of non-cancer and cancer risks can be avoided relative to the risk assessment based on the total concentrations of PTEs. More importantly, priority control metals were misidentified without consideration of bioaccessibility. Cadmium, As, and Cr were screened as the priority metal(loid)s for targeted risk control based on the total PTEs, whereas Cd, Zn, and Cu were the priority metal(loid)s based on the bioaccessible PTEs. Furthermore, source apportionment revealed that >50% of oral bioaccessible Cd, Cu, Ni, Pb, and Zn in farmland were contributed by e-waste dismantling activities, whereas bioaccessible As and Cr mainly originated from agrochemical applications and natural sources, respectively. This study emphasizes the refinement of risk estimation and source apportionment through metal bioaccessibility adjustment, which facilitates the realistic assessment of adverse health effects in humans and the precise identification of high-risk sources.

Mercury in air and soil on an urban-rural transect in East Africa

There are large knowledge gaps concerning concentrations, sources, emissions, and spatial trends of mercury (Hg) in the atmosphere in developing regions of the Southern Hemisphere, particularly in urban areas. Filling these gaps is a prerequisite for assessing the effectiveness of international regulation and for enabling a better understanding of the global transport of Hg in the environment. Here we use a passive sampling technique to study the spatial distribution of gaseous elemental Hg (Hg(0), GEM) and assess emission sources in and around Dar es Salaam, Tanzania's largest city. Included in the study were the city's main municipal waste dumpsite and an e-waste processing facility as potential sources of GEM. To complement the GEM data and for a better overview of the Hg contamination status of Dar es Salaam, soil samples were collected from the same locations where passive air samplers were deployed and analysed for total Hg. Overall, GEM concentrations ranged between <0.86 and 5.34 ng m^-3, indicating significant local sources within the urban area. The municipal waste dumpsite and e-waste site had GEM concentrations elevated above the background, at 2.41 and 1.77 ng m^-3, respectively. Hg concentrations in soil in the region (range 0.0067 to 0.098 mg kg^-1) were low compared to those of other urban areas and were not correlated with atmospheric GEM concentrations. This study demonstrates that GEM is a significant environmental issue in the urban region of Dar es Salaam. Further studies from urban areas in the Global South are needed to better identify sources of GEM.

Analysis of environmental sustainability of e-waste in developing countries - a case study from Pakistan

The electronic waste generation rate is increasing drastically at a rate of 3 to 5% per year in developing countries. The aim of this study is to analyze the environmental sustainability and economic benefits of such e-waste management in the developing economies like Pakistan. The life cycle assessment (LCA) method has been employed for streamlined impact analysis of the end-of-life processing of e-waste focusing mainly on laptop computers and liquid crystal display (LCD) desktop computers in Pakistan. The method of cumulative exergy extraction from the natural environment (CEENE) has also been deployed for the relative assessment of resources' consumption of e-waste recycling versus landfilling scenario. The determined impact scores are 1.79E + 03 kg CO₂ eq., 7.19E-07 kg CFC-11 eq., 1.02E + 03 kg 1,4-DCB, 7.13E + 01 kg 1,4-DCB, and 3.41E-03 kg Cu eq. in climate change potential, stratospheric ozone depletion, ecotoxicity potential, human noncarcinogenic potential, and mineral resource depletion impact categories, respectively. The results of CEENE analysis reveal that approximately 80% of the impact on natural resources is reduced by the efficient recycling of e-waste. The comparative assessment of respective scores for current and target material weight recovery (MWR) indicators represented that by increasing the MWR indicator by 33.8% for laptop computers and by 27.2% for LCD computers, the country will achieve an annual economic benefit of US $191.56 million. This is greatly significant for a transitional shift towards e-waste revalorization while realizing the objectives of sustainable resource consumption. Innovative improvement measures ensuring economically feasible, energy-efficient, and environment friendly waste collection, treatment, and recycling practices present an invaluable opportunity for developing countries.

E-Device Purchase and Disposal Behaviours in the UAE: An Exploratory Study

The United Arab Emirates (UAE) is one of the high-income countries in the Middle Eastern region and is vying for sustainable development in every sector. One of the UAE sustainable development goals is to ensure sustainable consumption and production patterns; hence, the emphasis is on circular economy. UAE is one of largest consumers of e-devices, and their proper disposal is of paramount importance. E-waste disposal awareness leads to better disposal behaviors. Therefore, the purpose of the study was to understand the e-device purchase and disposal behaviour among university communities in the UAE. A survey was conducted among the students and staff members of a federally funded university in the UAE, namely Zayed University, and quantitative methodology was adopted to analyze the collected data. The study found that 47.95% of respondents purchased mobile phones, and 65% of the respondents purchased 1–3 electronic devices every year. Through chi-square test, gender of the respondents was found to be related with e-device ownership. Through the analysis of variance (ANOVA), age and field of specialization were found to affect the knowledge about e-waste. Older and the respondents with science specialization were more aware about e-waste. Most of the respondents disposed e-devices, such as batteries, earphones/headphones, and electronic toys, along with the household trash. A very small percentage of respondents disposed e-devices such as laptops, phones, and tablets with the household trash. Mostly, these were either repaired, donated, or sold to second-hand users. Many respondents were neither aware of the government initiatives on e-waste collection nor participated in government-sponsored e-waste recycling. The study further identified that 67% of the respondents were aware of the toxicity of e-waste, and 61% of the respondents were keen to join e-waste recycling drives at university. The findings of the study imply that the policy makers need to incentivize e-waste-disposal systems and develop targeted awareness approaches to enhance e-waste disposal in the UAE.

Photodegradation of Decabrominated Diphenyl Ether in Soil Suspensions: Kinetics, Mechanisms and Intermediates

Pollution by polybrominated diphenyl ethers (PBDEs) is a major concern due to their bioaccumulation, persistence, and carcinogenicity. This study aimed to investigate the decabrominated diphenyl ether (BDE-209) photodegradation in soil suspensions. The results indicate BDE-209 can degrade in soil suspensions and its degradation follows pseudo-first-order kinetics. The light sources and intensity effects were studied and the photodegradation rates were 500 W Mercury Lamp > 300 W Mercury Lamp > 500 W Xenon Lamp > 300 W Xenon Lamp, which indicates UV light is the main reason for BDE-209 degradation. Soil particle inhibits BDE-209 photodegradation due to the light-shielding effect. BDE-209 photodegradation rates increased from 0.055 to 0.071 h−1 with pH value increasing from 3.5 to 9.5. This may be because the products are more easily produced in higher pH soil suspensions. The presence of humic acid (HA) may inhibit BDE-209 photodegradation by photo-shielding. Fe3+ and Cu2+ have an adverse effect on BDE-209 photodegradation due to the photo competition. The •OH and 1O2 were detected in soil solutions. Analysis of the photoproducts of BDE-209 by gas chromatography mass spectrometry (GC-MS) and liquid chromatography time of flight mass spectrometry (LC-TOF-MS) showed that BDE-209 was mainly debrominated to the lower-brominated BDEs and the reactive oxygen radicals may not lead to BDE-209 degradation.

Modeling and visualizing the transport and retention of cationic and oxyanionic metals (Cd and Cr) in saturated soil under various hydrochemical and hydrodynamic conditions

Cationic and oxyanionic metals are widely existed in the aquatic and soil environment with the process of industrialization and they may behave different transport properties in aquifer systems due to the opposite charges. In this study, the comparative transport behaviors of Cd²⁺ and CrO₄^2- in water-saturated soil columns were investigated under a variety of hydrochemical and hydraulic conditions such as pH, ionic strength (IS), and flow rate. The transport mechanisms of Cd(II) and Cr(VI) were explored by fitting the breakthrough curves with a two-site non-equilibrium transport model. Results indicated that high solution pH inhibited the transport of Cd(II) due to the enhanced electrostatic interaction. In contrast, the migration of Cr(VI) was promoted with the least amount of Cr(VI) (1.23 mg) being retained in soil at high pH, ascribing to the stronger electrostatic repulsion between anions and soil surface. Meanwhile, high pH conditions were not favorable for the participation of reduced iron in the reduction process of Cr(VI), resulting in the least amount of Cr(III) detected (22%). The increase in ionic strength decreased the negativity of the potential at the adsorption plane, which enhanced the transport of cationic Cd(II) and the retardation of anionic Cr(VI). In addition, the increase in flow rate facilitated the transport of Cd(II) and Cr(VI), mainly due to the decreasing contacting with porous media and enhanced dispersion effect. These findings demonstrated that the fate and environmental behavior of metal cations and anions differed with the change of hydrochemical and hydrodynamic properties, which should be considered for the risk assessment and remediation of metal contaminated sites.

Bioremediation of PAHs and heavy metals co-contaminated soils: Challenges and enhancement strategies

Systemic studies on the bioremediation of co-contaminated PAHs and heavy metals are lacking, and this paper provides an in-depth review on the topic. The released sources and transport of co-contaminated PAHs and heavy metals, including their co-occurrence through formation of cation-π interactions and their adsorption in soil are examined. Moreover, it is investigated that co-contamination of PAHs and heavy metals can drive a synergistic positive influence on bioremediation through enhanced secretion of extracellular polymeric substances (EPSs), production of biosynthetic genes, organic acid and enzymatic proliferation. However, PAHs molecular structure, PAHs-heavy metals bioavailability and their interactive cytotoxic effects on microorganisms can exert a challenging influence on the bioremediation under co-contaminated conditions. The fluctuations in bioavailability for microorganisms are associated with soil properties, chemical coordinative interactions, and biological activities under the co-contaminated PAHs-heavy metals conditions. The interactive cytotoxicity caused by the emergence of co-contaminants includes microbial cell disruption, denaturation of DNA and protein structure, and deregulation of antioxidant biological molecules. Finally, this paper presents the emerging strategies to overcome the bioavailability problems and recommends the use of biostimulation and bioaugmentation along with the microbial immobilization for enhanced bioremediation of PAHs-heavy metals co-contaminated sites. Better knowledge of the bioremediation potential is imperative to improve the use of these approaches for the sustainable and cost-effective remediation of PAHs and heavy metals co-contamination in the near future.

Gastric bioaccessibility and human health risks associated with soil metal exposure via ingestion at an E-waste recycling site in Kumasi, Ghana

Over 1000 people make a living by processing electronic and electrical waste (E-waste) and scrap metals for the recovery of valuable metals and integrated circuits at Dagomba Line, Kumasi, Ghana. The processing includes activities such as dismantling, open burning and open dumping of E-waste which can potentially release toxic metals into the environment and thus impact the health of recyclers and nearby residents. This study investigated the distribution of toxic metals (As, Cd, Cr, Cu, Hg, Ni, Pb, Sb and Zn) in surface soils at the E-waste recycling sites and determined the associated human health risk via ingestion incorporating bioaccessibility measurements. Metal concentrations in the activity sites were highly elevated, significantly higher than those in the surrounding area and exceeded international soil quality guidelines such as the Canadian soil quality guidelines for residential land use and the Dutch Intervention Value. Bioaccessibility was high for Pb (70.8%), Cd (64.1%), Cu (62.3%) and Ni (53.6%) which could be credited to the existence of oxidized species as a result of the E-waste burning. Non-carcinogenic effects were unacceptably high (hazard indices > 1) at 14 out of 31 sites, and the cancer risk for arsenic for adult workers was greater than 1 × 10^-5 at five of the sampling sites.

Electronic wastes: A near inexhaustible and an unimaginably wealthy resource for water splitting electrocatalysts

E-wastes comprise complex combinations of potentially toxic elements that cause detrimental effects of the environmental contamination; besides their posing threat, most of the products also contain valuable and recoverable materials (Li, Au, Ag, W, Se, Te, etc.), which make them distinct from other forms of industrial wastes. Most of these value-added elements which are primarily employed in electronic goods are disposed of by incineration and land-filling. This is a serious issue besides just environmental pollution, as IUPAC recognized that such ignorance of or poor attention to e-waste recycling has put several elements in the periodic table to the list of endangered elements. Recycling these wastes utilized for electrocatalytic water splitting to produce H₂. These recovered e-wastes materials are used as electrocatalysts for the water-splitting, additives to enhance reaction kinetics, and substrate electrodes as well. Recycling and recovery of value-added materials in the view of applying them to electrocatalytic water splitting with endangered elements' perspective have not been covered by any recent review so far. Hence, this review is dedicated to discussing the opportunities available with recycling e-wastes, types of value-added materials that can be recovered for water splitting, strategies exploited, and prospects are discussed in details.

Recent advances in PCB removal from historically contaminated environmental matrices

Despite being drastically restricted in the 1970s, polychlorinated biphenyls (PCBs) still belong among the most hazardous contaminants. The chemical stability and dielectric properties of PCBs made them suitable for a number of applications, which then lead to their ubiquitous presence in the environment. PCBs are highly bioaccumulative and persistent, and their teratogenic, carcinogenic, and endocrine-disrupting features have been widely reported in the literature. This review discusses recent advances in different techniques and approaches to remediate historically contaminated matrices, which are one of the most problematic in regard to decontamination feasibility and efficiency. The current knowledge published in the literature shows that PCBs are not sufficiently removed from the environment by natural processes, and thus, the suitability of some approaches (e.g., natural attenuation) is limited. Physicochemical processes are still the most effective; however, their extensive use is constrained by their high cost and often their destructiveness toward the matrices. Despite their limited reliability, biological methods and their application in combinations with other techniques could be promising. The literature reviewed in this paper documents that a combination of techniques differing in their principles should be a future research direction. Other aspects discussed in this work include the incompleteness of some studies. More attention should be given to the evaluation of toxicity during these processes, particularly in terms of monitoring different modes of toxic action. In addition, decomposition mechanisms and products need to be sufficiently clarified before combined, tailor-made approaches can be employed.

Occupational exposures to particulate matter and PM2.5-associated polycyclic aromatic hydrocarbons at the Agbogbloshie waste recycling site in Ghana

Electronic waste (e-waste) disposal and recycling activities such as burning and smelting can emit particulate matter (PM), polycyclic aromatic hydrocarbons (PAHs), and other pollutants that expose workers and nearby communities. At informal e-waste recycling facilities, both emission controls and protective measures for workers are absent. This study characterizes personal exposures (breathing zone) of PM and PAHs of e-waste workers at the large Agbogbloshie e-waste site in Accra, Ghana. We collected gravimetric and optical measurements of PM2.5 and PM10 using shift samples for workers and for an age- and gender-matched reference population. PM2.5 filters were analyzed for 26 PAHs using gas chromatography/mass spectroscopy. Among e-waste workers, PM2.5 and PM10 concentrations were 99 ± 56 and 218 ± 158 µg/m3 (median ± interquartile range, optical measurements), respectively; these levels were 78 and 57% higher, respectively, than levels measured at a fixed site that was centrally located at the waste site. In the reference community, breathing zone PM2.5 and PM10 levels were lower, 49 ± 20 and 131 ± 108 µg/m3, respectively, and the fraction of coarse PM was larger. We detected all 26 target PAHs, of which naphthalene and phenanthrene were the most abundant. PAH concentrations were weakly correlated to PM levels, but PAH abundances, representing the fraction of PAH mass to the total PM2.5 mass collected, were strongly and inversely correlated to PM levels, suggesting multiple and different sources of PAHs and PM that affected exposures. Both PM and PAH levels were elevated for workers performing burning and dismantling, and both exceeded standards or risk-based guidelines, e.g., lifetime excess cancer risks for several PAHs were in the 10-4 to 10-6 range, indicating the need to reduce emissions as well as provide respiratory protection. The study emphasizes the importance of using personal and shift samples to accurately characterize worker exposure.

A contemporary review of electronic waste through the lens of inhalation toxicology

Inhalation is a significant route of exposure to toxic chemicals for electronic waste (e-waste) workers, especially for those whose activities take place in the informal sector. However, there remains a dearth of research on the health effects produced by the hazardous dismantling of e-waste and associated outcomes and biological mechanisms that occur as a result of inhalation exposure. This contemporary review highlights a number of the toxicological and epidemiological studies published on this topic to bring to light the many knowledge gaps that require further research, including in vitro and ex vivo investigations to address the health outcomes and underlying mechanisms of inhaled e-waste-associated pulmonary disease.

Airborne volatile organic compounds at an e-waste site in Ghana: Source apportionment, exposure and health risks

Informal e-waste recycling processes emit various air pollutants. While there are a number of pollutants of concern, little information exists on volatile organic compounds (VOCs) releases at e-waste sites. To assess occupational exposures and estimate health risks, we measured VOC levels at the Agbogbloshie e-waste site in Ghana, the largest e-waste site in Africa, by collecting both fixed-site and personal samples for analyzing a wide range of VOCs. A total of 54 VOCs were detected, dominated by aliphatic and aromatic compounds. Mean and median concentrations of the total target VOCs were 46 and 37 μg/m³ at the fixed sites, and 485 and 162 μg/m³ for the personal samples. Mean and median hazard ratios were 2.1 and 1.4, respectively, and cancer risks were 4.6 × 10^-4 and 1.5 × 10^-4. These risks were predominantly driven by naphthalene and benzene; chloroform and formaldehyde were also high in some samples. Based on the VOC composition, the major sources were industry, fuel evaporation and combustion. The concentration gradient across sites and the similarity of VOC profiles indicated that the e-waste site emissions reached neighboring communities. Our results suggest the need to protect e-waste workers from VOC exposure, and to limit emissions that can expose nearby populations.

Status of short-chain chlorinated paraffins in matrices and research gap priorities in Africa: a review

Chlorinated paraffins (CPs) have been applied as additives in a wide range of consumer products, including polyvinyl chloride (PVC) products, mining conveyor belts, paints, sealants, adhesives and as flame retardants. Consequently, CPs have been found in many matrices. Of all the CP groups, short-chain chlorinated paraffins (SCCPs) have raised an alarming concern globally due to their toxicity, persistence and long-range transportation in the environment. As a result, SCCPs were listed in the Stockholm Convention on Persistent Organic Pollutants (POPs) in May 2017. Additionally, a limit for the presence of SCCPs in other CP mixtures was set at 1% by weight. CPs can be released into the environment throughout their life cycle; therefore, it becomes crucial to assess their effects in different matrices. Although about 199 studies on SCCP concentration in different matrices have been published in other continents; however, there are scarce/or limited studies on SCCP concentration in Africa, particularly on consumer products, landfill leachates and sediment samples. So far, published studies on SCCP concentration in the continent include SCCPs in egg samples, e-waste recycling area and indoor dust in Ghana and South Africa, despite absence of any production of SCCPs in Africa. However, there still remains a huge research gap in the continent of Africa on SCCPs. Consequently, there is a need to develop robust SCCP inventories in Africa since the Stockholm Convention has already developed guidance document in this respect. This review, therefore, examines the state of knowledge pertaining to the levels and trends of these contaminants in Africa and further provides research gaps that need to be considered in order to better understand the global scale of the contaminant.

Groundwater contaminated with short-chain chlorinated paraffins and microbial responses

The vertical migrations of toxic and persistent short-chain chlorinated paraffins (SCCPs) in soils as well as the microbial responses have been reported, however, there is a paucity of data on the resulting groundwater contamination. Here, we determined the concentration and congener profile of SCCPs in the groundwater beneath a production plant of chlorinated paraffins (CPs) and characterized the microbial community to explore their responses to SCCPs. Results showed that SCCPs ranged from not detected to 70.3 μg/L, with C₁₃-CPs (11.2-65.8%) and Cl₇-CPs (27.2-50.6%), in mass ratio, as the dominant groups. Similar to the distribution pattern in soils, SCCPs in groundwater were distributed in hotspot pattern. CP synthesis was the source of SCCPs in groundwater and the entire contamination plume significantly migrated downgradient, while there was an apparent hysteresis of C₁₃-CP migration. Groundwater microbial community was likely shaped by both hydrogeological condition (pH and depth) and SCCPs. Specifically, the microbial community responded to the contamination by forming a co-occurrence network with "small world" feature, where Desulfobacca, Desulfomonile, Ferritrophicum, Methylomonas, Syntrophobacter, Syntrophorhabdus, Syntrophus, and Thermoanaerobaculum were the keystone taxa. Furthermore, the interrelations between bacterial taxa and SCCPs indicated that the microbial community might cooperate to achieve the dechlorination and mineralization of SCCPs through either anaerobic organohalide respiration mainly functioned by the keystone taxa, or cometabolic degradation processes functioned by Aquabacterium and Hydrogenophaga. Results of this study would provide a better understanding of the environmental behavior and ecological effects of SCCPs in groundwater systems.

E-Waste in Africa: A Serious Threat to the Health of Children

Waste electronic and electrical equipment (e-waste) consists of used and discarded electrical and electronic items ranging from refrigerators to cell phones and printed circuit boards. It is frequently moved from developed countries to developing countries where it is dismantled for valuable metals in informal settings, resulting in significant human exposure to toxic substances. E-waste is a major concern in Africa, with large sites in Ghana and Nigeria where imported e-waste is dismantled under unsafe conditions. However, as in many developing countries, used electronic and electrical devices are imported in large quantities because they are in great demand and are less expensive than new ones. Many of these used products are irreparable and are discarded with other solid waste to local landfills. These items are then often scavenged for the purpose of extracting valuable metals by heating and burning, incubating in acids and other methods. These activities pose significant health risks to workers and residents in communities near recycling sites. E-waste burning and dismantling activities are frequently undertaken at e-waste sites, often in or near homes. As a result, children and people living in the surrounding areas are exposed, even if they are not directly involved in the recycling. While toxic substances are dangerous to individuals at any age, children are more vulnerable as they are going through important developmental processes, and some adverse health impacts may have long-term impacts. We review the e-waste situation in Africa with a focus on threats to children's health.

Persistent Organic Pollutants (POPs) and Related Chemicals in the Global Environment: Some Personal Reflections

Persistent organic pollutants (POPs) and related chemicals are fascinating because of their combination of physical-chemical properties and complex effects. Most are man-made, but some also have natural origins. They are persistent in the environment, but they can be broken down variously by biodegradation, atmospheric reactions, and abiotic transformations. They can exist in the gas or particle phases, or both, in the atmosphere and in the dissolved or particulate phases, or both, in water. These combinations mean that they may undergo long-range transport in the atmosphere or oceans, or they may stay close to sources. Hence, emissions from one country are frequently a source of contamination to another country. They are also usually lipophilic, so-combined with persistence-this means they can accumulate in organisms and biomagnify through food chains. We all have a baseline of POPs residues in our tissues, even the unborn fetus via placental transfer and the newly born baby via mother's milk. POPs in biological systems occur in mixtures, so confirming effects caused by POPs on humans and other top predators is never straightforward. Depending on which papers you read, POPs may be relatively benign, or they could be responsible for key subchronic and chronic effects on reproductive potential, on immune response, as carcinogens, and on a range of behavioral and cognitive end points. They could be a factor behind diseases and conditions which have been increasingly reported and studied in modern societies. In short, they are endlessly fascinating to scientists and a nightmare to regulators and policy makers.

Maternal transfer and occurrence of siloxanes, chlorinated paraffins, metals, PFAS and legacy POPs in herring gulls (Larus argentatus) of different urban influence

Urban herring gulls (Larus argentatus) are exposed to contaminants from aquatic, terrestrial and anthropogenic sources. We aim to assess if differences in urbanisation affect ecological niche and contaminant concentrations in female herring gulls. Furthermore, we investigated maternal transfer from mothers to eggs for all the target compounds, including chlorinated paraffins (CPs) and cyclic volatile methyl siloxane (cVMSs), which to our knowledge have not been assessed in herring gulls previously. We compare concentrations of legacy and emerging contaminants and metals in blood and eggs between two herring gull colonies located 51 km apart, in the urban influenced Norwegian Oslofjord. While both colonies are within an urbanised area, the inner fjord is more so, as it is surrounded by Oslo, the capital and largest city in Norway Stable isotopes of carbon and nitrogen indicated a more marine ecological niche in the outer than the inner fjord colony, although with overlap. Persistent organic pollutant (POP) concentrations were similar in the inner and outer fjord colonies, while the short-chained chlorinated paraffins (SCCP), which are recently added to the Stockholm convention and contaminants of emerging concern (CECs) varied, with higher concentrations of SCCP and the cVMS decamethylcyclopentasiloxane (D5) in females and eggs of the inner fjord colony. Per- and polyfluorinated substances (PFAS) concentrations were higher in the outer fjord colony, likely linked to releases from a point-source (airport and waste management facility with open access to food waste). In blood, chlorinated paraffins contributed most the total lipophilic contaminants (inner: 78%, outer: 56%), while polychlorinated biphenyls (PCBs) were the most abundant lipophilic contaminants in eggs (inner: 62%, outer: 46%). Dechloranes and brominated flame retardants (BFRs) were detected in few samples. Maternal transfer, assessed by egg to blood ratios, of cVMSs were similar to the POPs with mean log ratio 0.39 (D5), while it was lower for SCCPs, with log ratios-0.77. Our results indicate comparable POP exposure of the herring gulls in the inner and outer Oslofjord, likely due to overlap in ecological niches between the colonies and wide distribution of POPs. The differences between the colonies in concentrations of PFAS, cVMS and CPs shows that point source exposures and urban influence may be more important than ecological niche for these compounds.

Environmental contamination and public health effects of electronic waste: an overview

Purpose

In recent years, electronic waste has become the fastest growing waste stream globally with potential deleterious environmental and public health effects from its hazardous constituents. This review aims at providing an up-to-date information on the environmental and public health effects of e- wastes, and also identify research gaps that could form basis of further innovative studies on this important subject.

Methods

We carried out literature survey using several search engines. All available literature which reported directly on environmental contamination of air, soil, and water by e-wastes, and their effects on exposed plants, animals, and humans were used in other to generate an updated information.

Results

High production volume coupled with indiscriminate disposal and informal recycling has made electronic waste (e-waste) to become a global public and environmental health issue. E-waste is made up of different hazardous substances such as heavy metals and persistent organic pollutants with the capacity to contaminate the environment if processed or recycled inappropriately. Humans and animals become exposed to e-waste constituents via ingestion, inhalation, and dermal contact. Several health effects have been linked to e-wastes. The most susceptible were children, pregnant women, and workers in primitive recycling sites. Generation of e-waste is predicted to increase drastically in the next decade with the potential complex interactive effects of its constituents.

Conclusion

This review is an up-to-date assessment of studies and reports on e-waste environmental contamination and public health effects. The review has shown that e-waste contains constituents that caused adverse environmental effects and toxicity to the biota. However, there is an enormous data gap between exposure quantification and possible health effects. More studies are needed to elucidate and provide holistic information on environmental and public health dangers posed by e-waste constituents.

Polybrominated Diphenyl Ethers and Heavy Metals in a Regulated E-Waste Recycling Site, Eastern China: Implications for Risk Management

Serious pollution of multiple chemicals in irregulated e-waste recycling sites (IR-sites) were extensively investigated. However, little is known about the pollution in regulated sites. This study investigated the occurrence of 21 polybrominated diphenyl ethers (PBDEs) and 10 metals in a regulated site, in Eastern China. The concentrations of PBDEs and Cd, Cu, Pb, Sb, and Zn in soils and sediments were 1-4 and 1-3 orders of magnitude lower than those reported in the IR-sites, respectively. However, these were generally comparable to those in the urban and industrial areas. In general, a moderate pollution of PBDEs and metals was present in the vegetables in this area. A health risk assessment model was used to calculate human exposure to metals in soils. The summed non-carcinogenic risks of metals and PBDEs in the investigated soils were 1.59-3.27 and 0.25-0.51 for children and adults, respectively. Arsenic contributed to 47% of the total risks and As risks in 71.4% of the total soil samples exceeded the acceptable level. These results suggested that the pollution from e-waste recycling could be substantially decreased by the regulated activities, relative to poorly controlled operations, but arsenic pollution from the regulated cycling should be further controlled.

Increased adverse effects during metabolic transformation of short-chain chlorinated paraffins by cytochrome P450: A theoretical insight into 1-chlorodecane

Short-chain chlorinated paraffins (SCCPs), frequently detected in human tissues or organs, can result in threat to human health by disturbing normal metabolism. However, their metabolism mechanisms and fates are largely unclear. Therefore, to better understand the impacts of SCCPs and their metabolites on the human health, the metabolic mechanism and kinetics of SCCPs by cytochrome P450 enzymes (CYPs) were explored using density functional theory employed 1-chlorodecane as a model SCCPs. The results show that 1-chlorodecane could be readily metabolized by CYPs, and the rate constant reaches up 42.3 s^-1 in human body. Dechlorination of 1-chlorodecane is unlikely to occur and hydroxylation is dominated via H-abstraction pathways, especially from the intermediate C atom of 1-chlorodecane. The toxicity assessments suggest that the two metabolites, 10-chloro-decan-5-ol and 1-chlorodecanol could exhibit higher bioaccumulation, carcinogenicity and more serious damage on cardiovascular system after the metabolism of 1-chlorodecane. To our knowledge, this is the first study from the viewpoint of theoretical analysis to explore the metabolism of typical SCCPs in human body. It may provide deep insight into the metabolic transformation mechanism of SCCPs and cause the concerns about the adverse effects of their metabolites in human body.