Removal of gaseous DiBP and DnBP by ionizer-assisted filtration with an external electrostatic field

Tuning multi-scale pore structures in carbonaceous films via direct ink writing and sacrificial templates for efficient indoor formaldehyde removal

The primary challenges impeding the extensive application of adsorption for indoor air purification have been low efficiency and effective capacity. To fill the research gap, we developed carbonaceous net-like adsorption films featuring multi-scale porous structures for efficient indoor formaldehyde removal. By optimizing the interfacial mass transfer and internal diffusion, we designed macro- to mesoscale meshes on the film surface and micro- to nano-scale pores within the materials, which were achieved by direct-ink-writing (DIW) printing and sacrificial template methods, respectively. Compared to unmodified planar films, the developed films exhibited a significant increase in the initial single-pass efficiency of formaldehyde from 68.1 % to 89.0 %, with the 8-hour effective adsorption capacity (EACad) spiking from 2.74 mg/g to 8.60 mg/g. Through thermal regeneration, the film demonstrated stable operation for 30 days through a long-term experiment over 250 hours, and EACad significantly increased to 241.7 mg/g. The multi-scale adsorption films achieved nearly the highest purification rates and capacities among existing physisorption and chemisorption technologies, with the lowest energy cost of 0.37 kW·h per day. The innovative design and fabrication of multi-scale adsorption films evidence its substantial application for indoor formaldehyde purification and provide a viable solution for carbon capture and gas separation in environmental engineering.

Global perspectives on indoor phthalates and alternative plasticizers: Occurrence and key transport parameters

Phthalates and emerging alternative plasticizers have garnered significant attention due to their ubiquitous presence indoors and potential adverse health effects. However, the occurrences and key transport parameters of indoor alternative plasticizers have not been sufficiently summarized and analyzed, complicating exposure evaluation and pollution control efforts. This study addresses the gap by providing a comprehensive overview of the occurrence and key transport parameters of the most reported plasticizers, including 10 phthalates and 14 alternative plasticizers. The plasticizer content in source materials was found to range up to 27.6 wt%. An empirical formula was developed to predict the surface-adjacent gaseous plasticizer concentration (y0) of source materials, with values ranging from 0.015 to 64.7 μg/m3. Variations in plasticizer concentrations across source, gas, particle, and dust phases were thoroughly analyzed over both temporal and spatial dimensions from a global perspective, indicating significant differences between continents over time. A detailed investigation of phthalate regulations across continents suggests that the earlier enactment of phthalate bans in Europe is likely a key factor contributing to the most significant decrease in indoor phthalate concentrations. Furthermore, after systematically reviewing mass-transfer and partitioning theories, we developed empirical formulas to predict mass-transfer coefficients (hm) and partition coefficients (K) for both phthalates and alternative plasticizers. Notably, the hm and K parameters of the plasticizers were thoroughly calculated for typical indoor interfaces, including airborne particles, settled dust, and impermeable and permeable materials. Overall, this study advances the understanding of indoor plasticizers, facilitating health-risk assessment and the development of suitable control and monitoring technologies.

Polystyrene microplastics facilitate the chemical journey of phthalates through vegetable and aggravate phytotoxicity

Polystyrene microplastics (PS) and dibutyl phthalate (DBP) are emerging pollutants widely coexisting in agroecosystems. However, the efficacies of PS as carriers for DBP and their interactive mechanisms on crop safety remain scarce. Here, this study investigated the combined exposure effects and the interacting mechanisms of PS laden with DBP on choy sum (Brassica parachinensis L.). Results showed that PS could efficiently adsorb and carry DBP, with a maximum carrying capacity of 9.91 %, facilitating the chemical translocation of DBP in choy sum and exacerbating phytotoxicity. Due to the changes in the properties of PS, DBP loading aggravated the phytotoxicity of choy sum, exhibiting synergistically toxic effects compared with individual exposure. The Trojan-horse-complexes formed by PS+DBP severely delayed the seed germination process and altered spatial growth patterns, causing disruptions in oxidative stress, osmoregulation, photosynthetic function, and elemental reservoirs of choy sum. Combined pollutants enhanced the uptake and translocation of both PS and DBP by 8.90-31.94 % and 136.81-139.37 %, respectively; while the accumulation processes for PS were more complex than for DBP. Visualization indicated that PS was intensively sequestered in roots with a strong fluorescent signal after loading DBP. This study comprehensively investigated the efficacies of PS carrying DBP on phytotoxicity, bioavailability, and their interactive mechanisms, providing significant evidence for food safety assessment of emerging contaminant interactions.

Point-of-Use SERS Approach for Efficient Determination and Removal of Phthalic Acid Esters Based on a Metal-Organic Framework-Coated Melamine Sponge

Phthalic acid esters (PAEs) are ubiquitous environmental contaminants, and their real-time monitoring and removal remain challenging. Herein, a point-of-use (POU) device integrating adsorption, surface-enhanced Raman spectroscopy (SERS), and removal strategy was developed and realized ultrafast on-site determination of PAEs and cleanup of them from water. A piece of flexible melamine sponge (MS) was coated with gold nanostars (AuNSs) and metal-organic frameworks (MOFs), thus obtaining SERS activity and adsorption capacity. Based on this multifunctional AuNSs@MOFs/MS composite, clear trends were observed between SERS signal intensity and concentration of di(2-ethylhexyl)phthalate (DEHP) and dibutyl phthalate (DBP). The method detection limits of DEHP and DBP were calculated to be 0.75 × 10-7 and 0.67 × 10-7 M in water, respectively, proving good sensitivity. Furthermore, this POU device exhibited satisfactory adsorption capacity (∼82.3 g/g for DBP and ∼90.0 g/g for DEHP), high adsorption efficiency (equilibrium in 100 s), and good regeneration capability (removal efficiency >70% after 5 cycles). The applicability of this device was verified by its good determination and removal performance in real environmental water matrices. The whole process could be completed within 5 min. This approach provides a new POU alternative for real-time monitoring and removal of PAEs in water.

Phthalates in glass window films are associated with dormitory characteristics, occupancy activities and habits, and environmental factors

Phthalates are environmental endocrine disruptors that enter the human body through a variety of pathways and harm human health. The study aimed to explore the associations between phthalate concentrations in glass window films with dormitory characteristics, occupancy activities and habits, and environmental factors, of university dormitories. We surveyed these associations and measured the indoor environmental parameters of 144 dormitories from 13 universities in Beijing. Based on the results, we further explored the factors affecting phthalate concentrations using multivariate logistic regression. The results showed that phthalate concentrations in glass window films were associated with dormitory type, duration of occupancy, daily ventilation duration, window cleaning frequency, indoor relative humidity, light intensity, temperature, and particulate matter (PM₁₀) concentration. To date, there have only been a few studies on the factors that influence phthalate concentrations in glass window films; therefore, further study is needed. Our findings determined the influence of external factors on the different types of phthalates in window films, which helps understand indoor phthalate pollution and evaluate human exposure based on phthalate concentrations in glass window films.

Measurement methods and impact factors for the key parameters of VOC/SVOC emissions from materials in indoor and vehicular environments: A review

The emissions of volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs) from indoor building and vehicle cabin materials can adversely affect human health. Many mechanistic models to predict the VOC/SVOC emission characteristics have been proposed. Nowadays, the main obstacle to accurate model prediction is the availability and reliability of the physical parameters used in the model, such as the initial emittable concentration, the diffusion coefficient, the partition coefficient, and the gas-phase SVOC concentration adjacent to the material surface. The purpose of this work is to review the existing methods for measuring the key parameters of VOCs/SVOCs from materials in both indoor and vehicular environments. The pros and cons of these methods are analyzed, and the available datasets found in the literature are summarized. Some methods can determine one single key parameter, while other methods can determine two or three key parameters simultaneously. The impacts of multiple factors (temperature, relative humidity, loading ratio, and air change rate) on VOC/SVOC emission behaviors are discussed. The existing measurement methods span very large spatial and time scales: the spatial scale varies from micro to macro dimensions; and the time scale in chamber tests varies from several hours to one month for VOCs, and may even span years for SVOCs. Based on the key parameters, a pre-assessment approach for indoor and vehicular air quality is introduced in this review. The approach uses the key parameters for different material combinations to pre-assess the VOC/SVOC concentrations or human exposure levels during the design stage of buildings or vehicles, which can assist designers to select appropriate materials and achieve effective source control.

Partitioning of airborne PAEs on indoor impermeable surfaces: A microscopic view of the sorption process

Organic films were widely found on indoor impermeable surfaces exposed to gaseous organic compounds, but few studies have addressed the film growth details on different indoor substrates. In this study, we observed the topography evolution of phthalic acid ester (PAE) organic films on three impermeable substrates: polished glass (G-P), mirror-polished stainless steel (SS-M) and drawn stainless steel (SS-D). PAE organic films were preferentially formed upon the flat surface with sparse inherent nano-peaks of substrate G-P and in valleys of substrate SS-M and SS-D. Surface uniformity of substrates and viscosity of PAE molecules were inferred as critical parameters determining the surface average adhesion forces. We obtained the partition coefficients of DEP, DnBP, BBP and DEHP on substrate G-P, SS-M and SS-D by fitting the initial monolayer adsorption process. Organic films continuously grew instead of reaching adsorption equilibrium after long-term PAE exposure, indicating that multilayer adsorption may occur. The organic film growth rates in saturated gas-phase PAE concentrations were quantified as about one-tenth of the results in previous studies where substrates were simultaneously exposed to multiple pollutants. To sum up, the results outline PAE adsorption details on impermeable materials and provide a reference for better estimation on PAE exposure assessment.

The reaction laws and toxicity effects of phthalate acid esters (PAEs) ozonation degradation on the troposphere

Low-molecular-weight (LMW) phthalate acid esters (PAEs) tend to enter the atmosphere, flying for several kilometers, so it is easy to endanger human health. This work is the first to use quantum chemistry calculations (Gaussian 16 program) and computational toxicology (ECOSAR, TEST, and Toxtree software) to comprehensively study the ozonolysis mechanism of six LMW PAEs (dimethyl phthalate (DMP), diethyl phthalate (DEP), dipropyl phthalate (DPP), diisopropyl phthalate (DIP), dibutyl phthalate (DBP), and diisobutyl phthalate (DIBP)) in the atmosphere and the toxicity of DMP (take DMP as an example) in the conversion process. The results show that the electron-donating effect of the ortho position of the LMW PAEs has the most obvious influence on the ozonolysis. We summarized the ozonation reaction law of LMW PAEs at the optimal reaction site. At 298 K, the law of initial ozonolysis total rate constant of the LMW PAEs is k_DIP > k_DPP > k_DIBP > k_DMP > k_DEP > k_DBP, and the range is 9.56 × 10^-25 cm³ molecule^-1 s^-1 - 1.47 × 10^-22 cm³ molecule^-1 s^-1. According to the results of toxicity assessment, the toxicity of products is lower than DMP for aquatic organisms after ozonolysis. But those products have mutagenicity, developmental toxicity, non-genotoxicity, carcinogenicity, and corrosiveness to the skin. The proposed ozonolysis mechanism promotes our understanding of the environmental risks of PAEs and provides new ideas for studying the degradation of PAEs in the tropospheric gas phase.

The gas/particle partitioning behavior of phthalate esters in indoor environment: Effects of temperature and humidity

Phthalate esters (PAEs) are ubiquitous and among the most abundant semi-volatile organic compounds (SVOCs) in indoor environments. Due to their low saturated vapor pressure, SVOCs tend to adhere to indoor surfaces and particulate matters, which may result in higher total concentrations than occur in the gas phase alone. Thus, gas/particle partitioning of PAEs plays an important role in their indoor fates and health risks. However, the influence of indoor environmental parameters, including temperature and humidity, on the partitioning of PAEs between air and particles is rarely known. In this study, a novel experimental system was designed to investigate the effects of temperature and humidity on partitioning behavior between gas- and particle-phase PAEs. The chamber experiments were conducted at temperatures of 12.5 °C, 17.5 °C, 24.0 °C, 29.5 °C and 40.0 °C and moisture contents of 3.5 g/kg, 5.0 g/kg, 6.5 g/kg, 8.0 g/kg and 9.5 g/kg dry air. The results showed that higher temperatures led to stronger emission of phthalate esters from the PVC panel, which resulted in higher gas-phase concentrations of phthalate esters and particle-phase concentrations. In addition, temperature has a strong negative effect on the gas/particle partition coefficient (K_p), and an order of magnitude difference in K_p was observed between 12.5 and 40 °C. There are exponential decay laws between K_p and the absolute temperature. However, a smaller effect of humidity than of temperature on K_p was revealed, and no obvious law was found. Moreover, K_p of compounds with larger molecular weights are more obviously influenced by the variations in environmental factors. This study is of positive significance for reducing the health risks of PAEs by guiding the regulation of indoor environmental parameters.