Microplastics increase soil microbial network complexity and trigger diversity-driven community assembly

Deciphering the response of nodule bacteriome homeostasis in the bulk soil-rhizosphere-root-nodule ecosystem to soil microplastic pollution

Microplastic polyethylene (PE) is one of the most widely distributed pollutants in agricultural soils. However, its effects on the assembly and co-occurrence of the coevolved bacteriome of legume plants, especially on nodule bacteriome homeostasis, remain unclear. We analyzed nodule numbers, the difference between leaf δ15N and soil δ15N (Δδ15N), and bacterial communities from nodule, root, rhizosphere, and bulk soil under different microplastic PE treatments. We found that microplastic PE treatments accelerated nodulation, resulting Δδ15N decreased from -2.48 ‰ to -5.06 ‰. The microplastic PE treatments promoted the enrichment of nodule species from the root at an early stage with a source ratio increasing from 0.4 % to 46.6-89.6 %, and reduced selection on the nodule bacteriome with an increase in drift (from 2.8 % to 14.3-36.0 %), probably benefiting the function of Bradyrhizobium in the microbial network whose edges or molecularity increased. In the root, microplastic PE treatments resulted in an increase in homogeneous selection (increase from 29.2 % to 42.8-77.8 %) on the root bacteriome. This study provides new evidence that microplastics can promote nodulation and biological N fixation, revealing a mechanism by which microplastics change nodule bacteriome homeostasis in an Afisol.

Biodegradation of polyethylene with polyethylene-group-degrading enzyme delivered by the engineered Bacillus velezensis

Microplastics (MPs) pose an emerging threat to vegetable growing soils in Harbin, which have a relatively high abundance (11,065 n/kg) with 17.26 of potential ecological risk of single polymer hazard (EI) and 33.92 of potential ecological risk index (PERI). Polyethylene (PE) is the main type of microplastic pollution in vegetable growing soils in Harbin. In this study, the engineered Bacillus velezensis with polyethylene-group-degrading enzyme pathway (BCAv-PEase) was constructed to enhance the degradation of MPs of PE (PE-MPs). BCAv-PEase increased the biodegradation of PE-MPs, promoted weight loss of PE films, elevated surface tension, and decreased the surface hydrophobicity of PE through upregulating activities of depolymerases, dehydrogenase, and catalase. Mechanism analysis showed that BCAv-PEase degraded PE-MPs by promoting the secretion of PEase, thereby leading to the generation of new oxygenated functional groups within the PE-MPs substrate, which further accelerated the metabolic pathway of PE-MPs. The analysis of the microbial community during the PE-MPs degradation processes revealed that BCAv-PEase emerged as the principal bacterial player and stimulated the abundance of microbes and functional genes associated with the biodegradation of PE. In conclusion, this study provides a potential mechanism for biodegradation of PE-MPs mediated by BCAv-PEase via modulating substrate selectivity and optimizing biocatalytic pathways.

Discrepant effects of microplastics on soil phosphorus availability under different phosphorus fertilizer applications

The microplastic (MP) interaction with phosphorus (P) fertilizers and effects on P transformation and availability remain unclear. We conducted a 56-day soil incubation experiment with 1 % polyethylene (PE) and polylactic acid (PLA) microplastics (MPs) to analyze their influence on soil P fractions and availability under different P fertilizer regimes. While PE and PLA MPs had a negligible impact on P fraction and availability in unfertilized soils, they exhibited different effects in soils with organic fertilizer and calcium-magnesium-phosphate (CMP) fertilizer. Specifically, MPs decreased the available P content (13.95 %-28.99 %) in organic-fertilized soils after 28 days of incubation. This decreased available P was associated with reduced soil labile organic P content and soil acid phosphatase (ACP) activities. 16S rRNA high-throughput sequencing revealed that MP addition significantly reduced the relative abundance of Burkholderia-Caballeronia-Paraburkholderia (P < 0.05), potentially suppressing P mineralization and consequently decreasing soil P availability. In contrast to organic fertilizer-applied soils, available P content increased (4.48 %-26.95 %) in MP-treated soils with CMP fertilizer, leading to re-fixation of inorganic P by aluminum/iron (hydr)oxides. Arthrobacter and Streptacidiphilus might enhance P solubilization and mineralization in CMP fertilizer-applied soils after MP exposure. Traditional PE MPs exhibited a stronger influence on soil P availability than biodegradable PLA MPs, owing to their more pronounced effects on soil ACP activity and P-transforming microorganisms. These findings provided insights into the ecological risks of MP pollution in terrestrial ecosystems and emphasized the need to optimize P fertilizer application in the context of MP pollution and P resource limitation.

Impact of polyethylene microplastics on the nitrogen removal and bacterial community in sequencing batch reactor at different hydraulic retention times

Both hydraulic retention time (HRT) and microplastics (MPs) are factors affecting the performance of biological wastewater treatment processes, but how MPs affect the role of HRT in biological wastewater treatment performance has not been investigated. In this study, the effects of polyethylene MPs (PE-MPs) on the nitrogen removal performance in a sequencing batch reactor (SBR) at different HRTs were investigated by analyzing the changes in the content and composition of extracellular polymer substances (EPS) and in the bacterial communities and metabolic pathways. In the PE-MPs absence, the HRT was shortened from 1440 to 720 min, resulting in a decrease in the average elimination of chemical oxygen demand and ammonia nitrogen by 13.21 % and 3.78 %, respectively. Whereas the presence of 0.5 mg/L PE-MPs enhanced the reduction by 73.36 % and 93.85 %, respectively. PE-MPs did not change the promotional impacts of HRT shortening on the levels of protein (PN) and polysaccharide (PS) within EPS, while amplified this effect. Aromatic PN of EPS was more sensitive to PE-MPs and HRT than tryptophan-like PN. PE-MPs resulted in a lower enzyme level in nitrification and denitrification metabolism pathways at different HRTs compared to no PE-MPs. This research offers novel perspectives for understanding how PE-MPs intervene in the influence of HRT on biological wastewater treatment performance.

Enhanced methane production through synergistic integration of quorum sensing Signals and microbial electrolysis in anaerobic digestion of low-quality biomass

This study explored the synergistic effects of exogenous acyl homoserine lactones (AHLs) and microbial electrolysis (ME) on enhancing anaerobic digestion (AD) of low-quality biomass. The combined AHLs + ME strategy achieved a 79.50 % increase in cumulative methane production compared to the control, outperforming individual treatments. This enhancement was attributed to accelerated substrate degradation, selective enrichment of hydrogenotrophic methanogens (Methanobrevibacter, Methanobacterium, Methanofollis), and strengthened quorum sensing, electron transfer, and methane synthesis pathways. Metagenomic analysis revealed abundance upregulation of key genes involved in AHL synthesis (bjaI, rpaI, braI, rhiI) and sensing (solR, cepR, tofR), direct interspecies electron transfer (pilA, mtrC), and hydrogenotrophic methanogenesis (ftr, mvhD, vhuD, vhcD). This study offers a novel and sustainable strategy to optimize methane production from recalcitrant biomass, advancing AD-based waste-to-energy systems.

Potential impacts of microplastic pollution on soil-water-plant dynamics

This study was designed to assess the potential impact of microplastic (MP) pollution on soil hydrology, specifically in retaining and releasing moisture. Herein, High-Density Polyethylene (HDPE) MP of different sizes (i.e., 0.5-1, 1-3, and 3-5 mm) and shapes (i.e., fiber, film, and fragment) were evaluated for their effects on water retention curve (WRC) of sandy loam soil, chosen for its agricultural relevance and widespread environmental presence of HDPE. Nine contamination scenarios were simulated with a low MP pollution rate, 0.01% w/w. Van Genuchten models were used to assess plant available water (PAW), wilting point (WP), and water holding capacity (WHC). Results showed that studied MP could significantly affect WRC and PAW mainly by changing WHC rather than WP and that this effect varied with MP shape and size. According to the results, fragment MP had the greatest impact on soil WHC by increasing 36.3%, followed by fibers and films by 19.8% and 15.7%. MP particles significantly increased WHC, while WP remained relatively unchanged. An observed trend indicated that the impact on WHC increased with the size of the MP particles. These findings emphasize the need to manage soil MP pollution to protect plant growth, agriculture, and water dynamics.

Insights into soil microbial assemblages and nitrogen cycling function responses to conventional and biodegradable microplastics

Biodegradable microplastics (MPs) are proposed as sustainable alternatives to conventional MPs, yet their distinct effects on soil microbial communities and ecological functions remain insufficiently understood. This study compares the impacts of biodegradable polylactic acid (PLA) and conventional polyvinyl chloride (PVC) MPs on soil microbial assemblages and nitrogen cycling. Fluorescein diacetate hydrolase (FDAse) activity was temporarily stimulated by 2 % (w/w) PLA and PVC MPs, while 7 % (w/w) PVC MPs initially inhibited FDAse activity before promoting it. PLA MPs (2 % and 7 %, w/w) dramatically reduced bacterial diversity and altered community structure, enriching genera such as Nocardioides, Arthrobacter, Agromyces, Amycolatopsis, Saccharothrix, and Ramlibacter, known for degrading complex compounds. Conversely, PVC MPs (2 % and 7 %, w/w) showed minimal influence on bacterial diversity, with only temporary structural shifts at high concentrations (7 % w/w). Network analysis revealed greater microbial complexity with PLA MPs, where MPs-degrading taxa emerged as keystone species. PLA MPs at both concentrations notably increased the abundance of nitrogenase iron protein subunit H gene (nifH) and nitrogen-fixing bacteria, such as Bradyrhizobium, while also sustaining ammonia monooxygenase subunit A gene (AOB amoA) effects up to day 90. At higher doses (7 % w/w), PLA MPs enriched copper-containing nitrite reductase gene (nirK) and cytochrome cd1 nitrite reductase gene (nirS) abundance, boosting denitrifiers like Cupriavidus, Pseudarthrobacter, and Ensifer. In contrast, PVC MPs showed short-term effects on nitrogen cycling function. These findings have important implications for promoting sustainable agriculture and managing the environmental risks posed by MPs in soil ecosystems.

Effect of Multiyear Biodegradable Plastic Mulch on Soil Microbial Community, Assembly, and Functioning

The increasing use of biodegradable plastic mulch like polybutylene adipate terephthalate (PBAT) has raised concerns about its long-term environmental impact. In this study, we investigated the effects of multiyear PBAT mulch application on bacterial and fungal communities, assembly mechanisms, and key ecological functions. The microbial community diversity and composition were significantly altered after multiyear biodegradable plastic mulching. We observed that PBAT treatment enriched specific bacterial genera, such as Pantoea, potentially involved in plastic degradation, and fungal genera like Cephaliophora and Stephanosporaceae, which may play a role in organic matter decomposition. A null model analysis revealed that bacterial community assembly was largely shaped by deterministic processes, with stronger environmental selection pressures in PBAT-treated soils, while fungal communities were more influenced by stochastic processes. In addition, multiyear PBAT mulch application also impacted the functionality of the soil microbial communities. PBAT exposure enhanced biofilm formation in aerobic bacteria, promoting aerobic degradation processes while also reducing the abundance of stress-tolerant bacteria. Additionally, PBAT altered key microbial functions related to carbon, nitrogen, and sulfur cycling. Notably, the fungal communities exhibited functional shifts, with an increase in saprotrophic fungi being beneficial for nutrient cycling, alongside a potential rise in plant pathogenic fungi. These findings underscore the multiyear ecological impacts of biodegradable plastics, suggesting microbial adaptation to plastic degradation and changes in key ecological functions, with implications for agricultural sustainability and bioremediation strategies.

Microbial Electrochemical Technologies: Sustainable Solutions for Addressing Environmental Challenges

Addressing global challenges of waste management demands innovative approaches to turn biowaste into valuable resources. This chapter explores the potential of microbial electrochemical technologies (METs) as an alternative opportunity for biowaste valorisation and resource recovery due to their potential to address limitations associated with traditional methods. METs leverage microbial-driven oxidation and reduction reactions, enabling the conversion of different feedstocks into energy or value-added products. Their versatility spans across gas, food, water and soil streams, offering multiple solutions at different technological readiness levels to advance several sustainable development goals (SDGs) set out in the 2030 Agenda. By critically examining recent studies, this chapter uncovers challenges, optimisation strategies, and future research directions for real-world MET implementations. The integration of economic perspectives with technological developments provides a comprehensive understanding of the opportunities and demands associated with METs in advancing the circular economy agenda, emphasising their pivotal role in waste minimisation, resource efficiency promotion, and closed-loop system renovation.

Survival and transfer potential of Salmonella enterica serovar Typhimurium colonising polyethylene microplastics in contaminated agricultural soils

Agricultural environments are becoming increasingly contaminated with plastic pollution. Plastics in the environment can also provide a unique habitat for microbial biofilm, termed the 'plastisphere', which can also support the persistence of human pathogens such as Salmonella. Human enteric Salmonella enterica serovar Typhimurium can enter agricultural environments via flooding or from irrigation with contaminated water. Using soil mesocosms we quantified the ability of S. Typhimurium to persist on microplastic beads in two agriculturally relevant soils, under ambient and repeat flood scenarios. S. Typhimurium persisted in the plastisphere for 35 days in both podzol and loamy soils; while during multiple flood events was able to survive in the plastisphere for up to 21 days. S. Typhimurium could dissociate from the plastisphere during flooding events and migrate through soil in leachate, and importantly could colonise new plastic particles in the soil, suggesting that plastic pollution in agricultural soils can aid S. Typhimurium persistence and facilitate further dissemination within the environment. The potential for increased survival of enteric human pathogens in agricultural and food production environments due to plastic contamination poses a significant public health risk, particularly in potato or root vegetable systems where there is the potential for direct contact with crops.

Microplastic pollution promotes soil respiration: A global-scale meta-analysis

Microplastic (MP) pollution likely affects global soil carbon (C) dynamics, yet it remains uncertain how and to what extent MP influences soil respiration. Here, we report on a global meta-analysis to determine the effects of MP pollution on the soil microbiome and CO2 emission. We found that MP pollution significantly increased the contents of soil organic C (SOC) (21%) and dissolved organic C (DOC) (12%), the activity of fluorescein diacetate hydrolase (FDAse) (10%), and microbial biomass (17%), but led to a decrease in microbial diversity (3%). In particular, increases in soil C components and microbial biomass further promote CO2 emission (25%) from soil, but with a much higher effect of MPs on these emissions than on soil C components and microbial biomass. The effect could be attributed to the opposite effects of MPs on microbial biomass vs. diversity, as soil MP accumulation recruited some functionally important bacteria and provided additional C substrates for specific heterotrophic microorganisms, while inhibiting the growth of autotrophic taxa (e.g., Chloroflexi, Cyanobacteria). This study reveals that MP pollution can increase soil CO2 emission by causing shifts in the soil microbiome. These results underscore the potential importance of plastic pollution for terrestrial C fluxes, and thus climate feedbacks.

Insight into effect of polyethylene microplastic on nitrogen removal in moving bed biofilm reactor: Focusing on microbial community and species interactions

Microplastics (MPs) pollution has emerged as a global concern, and wastewater treatment plants (WWTPs) are one of the potential sources of MPs in the environment. However, the effect of polyethylene MPs (PE) on nitrogen (N) removal in moving bed biofilm reactor (MBBR) remains unclear. We hypothesized that PE would affect N removal in MBBR by influencing its microbial community. In this study, we investigated the impacts of different PE concentrations (100, 500, and 1000 μg/L) on N removal, enzyme activities, and microbial community in MBBR. Folin-phenol and anthrone colorimetric methods, oxidative stress and enzyme activity tests, and high-throughput sequencing combined with bioinformation analysis were used to decipher the potential mechanisms. The results demonstrated that 1000 μg/L PE had the greatest effect on NH4+-N and TN removal, with a decrease of 33.5 % and 35.2 %, and nitrifying and denitrifying enzyme activities were restrained by 29.5-39.6 % and 24.6-47.4 %. Polysaccharide and protein contents were enhanced by PE, except for 1000 μg/L PE, which decreased protein content by 65.4 mg/g VSS. The positive links of species interactions under 1000 μg/L PE exposure was 52.07 %, higher than under 500 μg/L (51.05 %) and 100 μg/L PE (50.35 %). Relative abundance of some metabolism pathways like carbohydrate metabolism and energy metabolism were restrained by 0.07-0.11 % and 0.27-0.4 %. Moreover, the total abundance of nitrification and denitrification genes both decreased under PE exposure. Overall, PE reduced N removal by affecting microbial community structure and species interactions, inhibiting some key metabolic pathways, and suppressing key enzyme activity and functional gene abundance. This paper provides new insights into assessing the risk of MPs to WWTPs, contributing to ensuring the health of aquatic ecosystems.

Colonization characteristics and dynamic transition of archaea communities on polyethylene and polypropylene microplastics in the sediments of mangrove ecosystems

Microplastics are a growing concern in mangrove ecosystems; however, their effects on archaeal communities and related ecological processes remain unclear. We conducted in situ biofilm-enrichment experiments to investigate the ecological influence of polyethylene (PE) and polypropylene microplastics on archaeal communities in the sediments of mangrove ecosystems. The archaeal community present on microplastics was distinct from that of the surrounding sediments at an early stage but became increasingly similar over time. Bathyarchaeota, Thaumarchaeota, Euryarchaeota, and Asgardaeota were the most abundant phyla. Methanolobus, an archaeal biomarker, was enriched in PE biofilms, and significantly controlled by homogeneous selection in the plastisphere, indicating an increased potential risk of methane emission. The dominant archaeal assembly process in the sediments was deterministic (58.85%-70.47%), while that of the PE biofilm changed from stochastic to deterministic during the experiment. The network of PE plastispheres showed less complexity and competitive links, and higher modularity and stability than that of sediments. Functional prediction showed an increase in aerobic ammonia oxidation during the experiment, whereas methanogenesis and chemoheterotrophy were significantly higher in the plastisphere. This study provides novel insights into the impact of microplastic pollution on archaeal communities and their mediating ecological functions in mangrove ecosystems.

Microplastics change soil properties, plant performance, and bacterial communities in salt-affected soils

Microplastics (MPs) are emerging contaminants found globally. However, their effects on soil-plant systems in salt-affected habitats remain unknown. Here, we examined the effects of polyethylene (PE) and polylactic acid (PLA) on soil properties, maize performance, and bacterial communities in soils with different salinity levels. Overall, MPs decreased soil electrical conductivity and increased NH4+-N and NO3--N contents. Adding NaCl alone had promoting and inhibitive effects on plant growth in a concentration-dependent manner. Overall, the addition of 0.2% PLA increased shoot biomass, while 2% PLA decreased it. Salinity increased Na content and decreased K/Na ratio in plant tissues (particularly roots), which were further modified by MPs. NaCl and MPs singly and jointly regulated the expression of functional genes related to salt tolerance in leaves, including ZMSOS1, ZMHKT1, and ZMHAK1. Exposure to NaCl alone had a slight effect on soil bacterial α-diversity, but in most cases, MPs increased ACE, Chao1, and Shannon indexes. Both MPs and NaCl altered bacterial community composition, although the specific effects varied depending on the type and concentration of MPs and the salinity level. Overall, PLA had more pronounced effects on soil-plant systems compared to PE. These findings bridge knowledge gaps in the risks of MPs in salt-affected habitats.

Discrepant soil microbial community and C cycling function responses to conventional and biodegradable microplastics

Biodegradable microplastics (MPs) are promising alternatives to conventional MPs and are of high global concern. However, their discrepant effects on soil microorganisms and functions are poorly understood. In this study, polyethylene (PE) and polylactic acid (PLA) MPs were selected to investigate the different effects on soil microbiome and C-cycling genes using high-throughput sequencing and real-time quantitative PCR, as well as the morphology and functional group changes of MPs, using scanning electron microscopy and Fourier transform infrared spectroscopy, and the driving factors were identified. The results showed that distinct taxa with potential for MP degradation and nitrogen cycling were enriched in soils with PLA and PE, respectively. PLA, smaller size (150-180 µm), and 5% (w/w) of MPs enhanced the network complexity compared with PE, larger size (250-300 µm), and 1% (w/w) of MPs, respectively. PLA increased β-glucosidase by up to 2.53 times, while PE (150-180 µm) reduced by 38.26-44.01% and PE (250-300 µm) increased by 19.00-22.51% at 30 days. Amylase was increased by up to 5.83 times by PLA (150-180 µm) but reduced by 40.26-62.96% by PLA (250-300 µm) and 16.11-43.92% by PE. The genes cbbL, cbhI, abfA, and Lac were enhanced by 37.16%- 1.99 times, 46.35%- 26.46 times, 8.41%- 69.04%, and 90.81%- 5.85 times by PLA except for PLA1B/5B at 30 days. These effects were associated with soil pH, NO3--N, and MP biodegradability. These findings systematically provide an understanding of the impact of biodegradable MPs on the potential for global climate change.

Freeze-thaw aged polyethylene and polypropylene microplastics alter enzyme activity and microbial community composition in soil

In cold regions, microplastics (MPs) in the soil undergo freeze-thaw (FT) aging process. Little is known about how FT aged MPs influence soil physico-chemical properties and microbial communities. Here, two environmentally relevant concentrations (50 and 500 mg/kg) of 50 and 500 µm polyethylene (PE) and polypropylene (PP) MPs treated soils were subjected to 45-day FT cycles (FTCs). Results showed that MPs experienced surface morphology, hydrophobicity and crystallinity alterations after FTCs. After 45-day FTCs, the soil urease (SUE) activity in control (MPs-free group that underwent FTCs) was 33.49 U/g. SUE activity in 50 µm PE group was reduced by 19.66 %, while increased by 21.16 % and 37.73 % in 500 µm PE and PP groups compared to control. The highest Shannon index was found in 50 µm PP-MPs group at 50 mg/kg, 2.26 % higher than control (7.09). Compared to control (average weighted degree=8.024), all aged MPs increased the complexity of network (0.19-1.43 %). Bacterial biomarkers of aged PP-MPs were associated with pollutant degradation. Aged PP-MPs affected genetic information, cellular processes, and disrupted the biosynthesis of metabolites. This study provides new insights into the potential hazards of MPs after FTCs on soil ecosystem in cold regions.

Interaction patterns and keystone taxa of bacterial and eukaryotic communities during sulfamethoxazole mineralization in lake sediment

Sulfamethoxazole (SMX) is a common antibiotic pollutant in aquatic environments, which is highly persistent under various conditions and significantly contributes to the spread of antibiotic resistance. Biodegradation is the major pathway to eliminate antibiotics in the natural environment. The roles of bacteria and eukaryotes in the biodegradation of antibiotics have received considerable attention; however, their successions and co-occurrence patterns during the biodegradation of antibiotics remain unexplored. In this study, 13C-labled SMX was amended to sediment samples from Zhushan Bay (ZS), West Shore (WS), and Gonghu Bay (GH) in Taihu Lake to explore the interplay of bacterial and eukaryotic communities during a 30-day incubation period. The cumulative SMX mineralization on day 30 ranged from 5.2 % to 19.3 %, which was the highest in WS and the lowest in GH. The bacterial community showed larger within-group interactions than between-group interactions, and the positive interactions decreased during incubation. However, the eukaryotic community displayed larger between-group interactions than within-group interactions, and the positive interactions increased during incubation. The proportion of negative interactions between bacteria and eukaryotes increased during incubation. Fifty genera (including 46 bacterial and 4 eukaryotic genera) were identified as the keystone taxa due to their dominance in the co-occurrence network and tolerance to SMX. The cumulative relative abundance of these keystone taxa significantly increased during incubation and was consistent with the SMX mineralization rate. These taxa closely cooperated and played vital roles in co-occurrence networks and microbial community interactions, signifying their crucial role in SMX mineralization. These findings broadened our understanding of the complex interactions of microorganisms under SMX exposure and their potential functions during SMX mineralization, providing valuable insights for in situ bioremediation.

Microplastics enhance the invasion of exotic submerged macrophytes by mediating plant functional traits, sediment properties, and microbial communities

Plant invasions and microplastics (MPs) have significantly altered the structure and function of aquatic habitats worldwide, resulting in severe damage to aquatic ecosystem health. However, the effects of MPs on plant invasion and the underlying mechanisms remain largely unknown. In this study, we conducted mesocosm experiments over a 90-day period to assess the effects of polystyrene microplastics on the invasion of exotic submerged macrophytes, sediment physicochemical properties, and sediment bacterial communities. Our results showed that PS-MPs significantly promoted the performance of functional traits and the invasive ability of exotic submerged macrophytes, while native plants remained unaffected. Moreover, PS-MPs addition significantly decreased sediment pH while increasing sediment carbon and nitrogen content. Additionally, MPs increased the diversity of sediment bacterial community but inhibited its structural stability, thereby impacting sediment bacterial multifunctionality to varying degrees. Importantly, we identified sediment properties, bacterial composition, and bacterial multifunctionality as key mediators that greatly enhance the invasion of exotic submerged macrophytes. These findings provide compelling evidence that the increase in MPs may exacerbate the invasion risk of exotic submerged macrophytes through multiple pathways. Overall, this study enhances our understanding of the ecological impacts of MPs on aquatic plant invasion and the health of aquatic ecosystems.

The effects of Micro/Nano-plastics exposure on plants and their toxic mechanisms: A review from multi-omics perspectives

In recent years, plastic pollution has become a global environmental problem, posing a potential threat to agricultural ecosystems and human health, and may further exacerbate global food security problems. Studies have revealed that exposure to micro/nano-plastics (MPs/NPs) might cause various aspects of physiological toxicities, including plant biomass reduction, intracellular oxidative stress burst, photosynthesis inhibition, water and nutrient absorption reduction, cellular and genotoxicity, seed germination retardation, and that the effects were closely related to MP/NP properties (type, particle size, functional groups), exposure concentration, exposure duration and plant characteristics (species, tissue, growth stage). Based on a brief review of the physiological toxicity of MPs/NPs to plant growth, this paper comprehensively reviews the potential molecular mechanism of MPs/NPs on plant growth from perspectives of multi-omics, including transcriptome, metabolome, proteome and microbiome, thus to reveal the role of MPs/NPs in plant transcriptional regulation, metabolic pathway reprogramming, protein translational and post-translational modification, as well as rhizosphere microbial remodeling at multiple levels. Meanwhile, this paper also provides prospects for future research, and clarifies the future research directions and the technologies adopted.

Effects of hexabromocyclododecane and polyethylene microplastics on soil bacterial communities

Hexabromocyclododecane (HBCD) and polyethylene (PE) microplastic are ubiquitous pollutants, and knowledge about the effects of HBCD and PE pollution on soil bacterial communities remains obscure. In this study, the effects of different HBCD and PE concentrations and combined HBCD and PE exposure on the diversity, composition, and function of agricultural soil bacterial communities over 4 months were systematically examined for the first time. Generally, soil bacterial communities were influenced in both the 1-month and 4-month scenarios through HBCD and PE separately as well as combined exposure. After 4 months of exposure, PE and combined exposure significantly affected soil bacterial alpha diversity, however, low concentration of HBCD showed no apparent influence. 1-month and 4-month HBCD, PE, and combined exposure significantly influenced bacterial beta diversity. Compared with 1 month of exposure, HBCD, PE, and combined exposure demonstrated remarkable influences on soil bacteria after 4 months of exposure, especially on Nitrospirae, Elusimicrobia, Rokubacteria at the phylum level, and on MND1, Ruminiclostridium, Lysobacter, Anaeromyxobacter, Alistipes, WCHB1 at the genus level. The bacterial function analysis indicated that amino acid metabolism, carbohydrate metabolism, and membrane transport were the three predominant enriched bacterial functions after 1-month and 4-month HBCD and PE exposure. This research provides a comprehensive grasp of the effects of HBCD and PE pollution on soil microbial communities, which could have a beneficial impact on future soil pollution control.

Toward an intensive understanding of sewer sediment prokaryotic community assembly and function

Prokaryotic communities play important roles in sewer sediment ecosystems, but the community composition, functional potential, and assembly mechanisms of sewer sediment prokaryotic communities are still poorly understood. Here, we studied the sediment prokaryotic communities in different urban functional areas (multifunctional, commercial, and residential areas) through 16S rRNA gene amplicon sequencing. Our results suggested that the compositions of prokaryotic communities varied significantly among functional areas. Desulfomicrobium, Desulfovibrio, and Desulfobacter involved in the sulfur cycle and some hydrolytic fermentation bacteria were enriched in multifunctional area, while Methanospirillum and Methanoregulaceae, which were related to methane metabolism were significantly discriminant taxa in the commercial area. Physicochemical properties were closely related to overall community changes (p < 0.001), especially the nutrient levels of sediments (i.e., total nitrogen and total phosphorus) and sediment pH. Network analysis revealed that the prokaryotic community network of the residential area sediment was more complex than the other functional areas, suggesting higher stability of the prokaryotic community in the residential area. Stochastic processes dominated the construction of the prokaryotic community. These results expand our understanding of the characteristics of prokaryotic communities in sewer sediment, providing a new perspective for studying sewer sediment prokaryotic community structure.