SARS-CoV-2 viability under different meteorological conditions, surfaces, fluids and transmission between animals

Seasonal patterns of air pollution in Delhi: interplay between meteorological conditions and emission sources

Air pollution (AP) poses a significant public health risk, particularly in developing countries, where it contributes to a growing prevalence of health issues. This study investigates seasonal variations in key air pollutants, including particulate matter, nitrogen dioxide (NO2), sulfur dioxide (SO2), carbon monoxide (CO), and ozone (O3), in New Delhi during 2024. Utilizing Sentinel-5 satellite data processed through the Google earth engine (GEE), a cloud-based geospatial analysis platform, the study evaluates pollutant dynamics during pre-monsoon and post-monsoon seasons. The methodology involved programming in JavaScript to extract pollution parameters, applying cloud filters to eliminate contaminated data, and generating average pollution maps at monthly, seasonal, and annual intervals. The results revealed distinct seasonal pollution patterns. Pre-monsoon root mean square error (RMSE) values for CO, NO2, SO2, and O3 were 0.13, 2.58, 4.62, and 2.36, respectively, while post-monsoon values were 0.17, 2.41, 4.31, and 4.60. Winter months exhibited the highest pollution levels due to increased emissions from biomass burning, vehicular activity, and industrial operations, coupled with atmospheric inversions. Conversely, monsoon months saw a substantial reduction in pollutant levels due to wet deposition and improved dispersion driven by stronger winds. Additionally, post-monsoon crop residue burning emerged as a major episodic pollution source. This study underscores the utility of Sentinel-5 products in monitoring urban air pollution and provides valuable insights for policymakers to develop targeted mitigation strategies, particularly for urban megacities like Delhi, where seasonal and source-specific interventions are crucial for reducing air pollution and its associated health risks.

Amazon tropical fishes of commercial interest show human-cell contamination but no SARS-CoV-2 in a real-life scenario

BACKGROUND

Amazonas was one of the most impacted Brazilian states by the COVID-19 pandemic. Mortality rates were high, and the health systems collapsed. It is important to identify possible intermediate reservoirs to avoid animal-to-human contamination. Several tropical fish are of commercial interest and are sold in large open-air markets in the region, representing a large economic and dietary importance.

OBJECTIVES

This study aimed to verify if fish species of commercial importance, aerosols, and fish wastewater in local open-air markets, at a major capital city in the western Brazilian Amazon, are contaminated by SARS-CoV-2.

METHODS

488 fish, 50 aerosol, and 45 wastewater samples were analyzed for the presence of SARS-CoV-2. The samples were subjected to extraction using the BIOGENE Viral DNA/RNA Extraction kit, and the molecular diagnosis was tested for SARS-CoV-2 using the Bio-Manguinhos SARS-CoV-2 (EDx) Molecular Kit.

RESULTS

It was not possible to detect the virus (Ct≤40, for Gene E) in these samples, however, in 181 samples of fish it was possible to detect the human RP gene (Ct≤35, for the RP Gene), indicating human contact. There was a high number of COVID-19 diagnoses in all city districts in which the samples were collected, showing that SARS-CoV-2 was circulating.

CONCLUSION

This study indicates that fish of local commercial importance do not carry SARS-CoV-2 viral particles, despite circulation of SARS-CoV-2, and are not an important source of animal-to-human contamination. Despite these results, the human RP gene was found detectable in fish, air, and fish wastewater, showing that such places may carry human pathogens.

Laboratory studies on the infectivity of human respiratory viruses: Experimental conditions, detections, and resistance to the atmospheric environment

The environmental stability of infectious viruses in the laboratory setting is crucial to the transmission potential of human respiratory viruses. Different experimental techniques or conditions used in studies over the past decades have led to diverse understandings and predictions for the stability of viral infectivity in the atmospheric environment. In this paper, we review the current knowledge on the effect of simulated atmospheric conditions on the infectivity of respiratory viruses, mainly focusing on influenza viruses and coronaviruses, including severe acute respiratory syndrome coronavirus 2 and Middle East respiratory syndrome coronavirus. First, we summarize the impact of the experimental conditions on viral stability; these involve the methods of viral aerosol generation, storage during aging and collection, the virus types and strains, the suspension matrixes, the initial inoculum volumes and concentrations, and the drying process. Second, we summarize and discuss the detection methods of viral infectivity and their disadvantages. Finally, we integrate the results from the reviewed studies to obtain an overall understanding of the effects of atmospheric environmental conditions on the decay of infectious viruses, especially aerosolized viruses. Overall, this review highlights the knowledge gaps in predicting the ability of viruses to maintain infectivity during airborne transmission.

Experimental and in silico evaluations of the possible molecular interaction between airborne particulate matter and SARS-CoV-2

During the early stage of the COVID-19 pandemic (winter 2020), the northern part of Italy has been significantly affected by viral infection compared to the rest of the country leading the scientific community to hypothesize that airborne particulate matter (PM) could act as a carrier for the SARS-CoV-2. To address this controversial issue, we first verified and demonstrated the presence of SARS-CoV-2 RNA genome on PM2.5 samples, collected in the city of Bologna (Northern Italy) in winter 2021. Then, we employed classical molecular dynamics (MD) simulations to investigate the possible recognition mechanism(s) between a newly modelled PM2.5 fragment and the SARS-CoV-2 Spike protein. The potential molecular interaction highlighted by MD simulations suggests that the glycans covering the upper Spike protein regions would mediate the direct contact with the PM2.5 carbon core surface, while a cloud of organic and inorganic PM2.5 components surround the glycoprotein with a network of non-bonded interactions resulting in up to 4769 total contacts. Moreover, a binding free energy of -207.2 ± 3.9 kcal/mol was calculated for the PM-Spike interface through the MM/GBSA method, and structural analyses also suggested that PM attachment does not alter the protein conformational dynamics. Although the association between the PM and SARS-CoV-2 appears plausible, this simulation does not assess whether these established interactions are sufficiently stable to carry the virus in the atmosphere, or whether the virion retains its infectiousness after the transport. While these key aspects should be verified by further experimental analyses, for the first time, this pioneering study gains insights into the molecular interactions between PM and SARS-CoV-2 Spike protein and will support further research aiming at clarifying the possible relationship between PM abundance and the airborne diffusion of viruses.

Mechanisms controlling the transport and evaporation of human exhaled respiratory droplets containing the severe acute respiratory syndrome coronavirus: a review

Transmission of the coronavirus disease 2019 is still ongoing despite mass vaccination, lockdowns, and other drastic measures to control the pandemic. This is due partly to our lack of understanding on the multiphase flow mechanics that control droplet transport and viral transmission dynamics. Various models of droplet evaporation have been reported, yet there is still limited knowledge about the influence of physicochemical parameters on the transport of respiratory droplets carrying the severe acute respiratory syndrome coronavirus 2. Here we review the effects of initial droplet size, environmental conditions, virus mutation, and non-volatile components on droplet evaporation and dispersion, and on virus stability. We present experimental and computational methods to analyze droplet transport, and factors controlling transport and evaporation. Methods include thermal manikins, flow techniques, aerosol-generating techniques, nucleic acid-based assays, antibody-based assays, polymerase chain reaction, loop-mediated isothermal amplification, field-effect transistor-based assay, and discrete and gas-phase modeling. Controlling factors include environmental conditions, turbulence, ventilation, ambient temperature, relative humidity, droplet size distribution, non-volatile components, evaporation and mutation. Current results show that medium-sized droplets, e.g., 50 µm, are sensitive to relative humidity. Medium-sized droplets experience delayed evaporation at high relative humidity, and increase airborne lifetime and travel distance. By contrast, at low relative humidity, medium-sized droplets quickly shrink to droplet nuclei and follow the cough jet. Virus inactivation within a few hours generally occurs at temperatures above 40 °C, and the presence of viral particles in aerosols impedes droplet evaporation.

Good and bad get together: Inactivation of SARS-CoV-2 in particulate matter pollution from different fuels

Air pollution and associated particulate matter (PM) affect environmental and human health worldwide. The intense vehicle usage and the high population density in urban areas are the main causes of this public health impact. Epidemiological studies have provided evidence on the effect of air pollution on airborne SARS-CoV-2 transmission and COVID-19 disease prevalence and symptomatology. However, the causal relationship between air pollution and COVID-19 is still under investigation. Based on these results, the question addressed in this study was how long SARS-CoV-2 survives on the surface of PM from different origin to evaluate the relationship between fuel and atmospheric pollution and virus transmission risk. The persistence and viability of SARS-CoV-2 virus was characterized in 5 engine exhaust PM and 4 samples of atmospheric PM₁₀. The results showed that SARS-CoV-2 remains on the surface of PM₁₀ from air pollutants but interaction with engine exhaust PM inactivates the virus. Consequently, atmospheric PM₁₀ levels may increase SARS-CoV-2 transmission risk thus supporting a causal relationship between these factors. Furthermore, the relationship of pollution PM and particularly engine exhaust PM with virus transmission risk and COVID-19 is also affected by the impact of these pollutants on host oxidative stress and immunity. Therefore, although fuel PM inactivates SARS-CoV-2, the conclusion of the study is that both atmospheric and engine exhaust PM negatively impact human health with implications for COVID-19 and other diseases.

Speaking-Induced Charge-Laden Face Masks with Durable Protectiveness and Wearing Breathability

Face masks, which serve as personal protection equipment, have become ubiquitous for combating the ongoing COVID-19. However, conventional electrostatic-based mask filters are disposable and short-term effective with high breathing resistance, causing respiratory ailments and massive consumption (129 billion monthly), intensifying global environmental pollution. In an effort to address these challenges, the introduction of a piezoelectric polymer was adopted to realize the charge-laden melt-blown via the melt-blowing method. The charge-laden melt-blown could be applied to manufacture face masks and to generate charges triggered by mechanical and acoustic energy originated from daily speaking. Through an efficient and scalable industrial melt-blown process, our charge-laden mask is capable of overcoming the inevitable electrostatic attenuation, even in a high-humidity atmosphere by long-wearing (prolonging from 4 to 72 h) and three-cycle common decontamination methods. Combined with outstanding protective properties (PM2.5 filtration efficiency >99.9%), breathability (differential pressure <17 Pa/cm2), and mechanical strength, the resultant charge-laden mask could enable the decreased replacement of masks, thereby lowering to 94.4% of output masks worldwide (∼122 billion monthly) without substituting the existing structure or assembling process.

Meteorological parameters and cases of COVID-19 in Brazilian cities: an observational study

Meteorological parameters modulate transmission of the SARS-Cov-2 virus, the causative agent related to coronavirus disease-2019 (COVID-19) development. However, findings across the globe have been inconsistent attributed to several confounding factors. The aim of the present study was to investigate the relationship between reported meteorological parameters from July 1 to October 31, 2020, and the number of confirmed COVID-19 cases in 4 Brazilian cities: São Paulo, the largest city with the highest number of cases in Brazil, and the cities with greater number of cases in the state of Parana during the study period (Curitiba, Londrina and Maringa). The assessment of meteorological factors with confirmed COVID-19 cases included atmospheric pressure, temperature, relative humidity, wind speed, solar irradiation, sunlight, dew point temperature, and total precipitation. The 7- and 15-day moving averages of confirmed COVID-19 cases were obtained for each city. Pearson's correlation coefficients showed significant correlations between COVID-19 cases and all meteorological parameters, except for total precipitation, with the strongest correlation with maximum wind speed (0.717, <0.001) in São Paulo. Regression tree analysis demonstrated that the largest number of confirmed COVID-19 cases was associated with wind speed (between ≥0.3381 and <1.173 m/s), atmospheric pressure (<930.5mb), and solar radiation (<17.98e⁺³). Lower number of cases was observed for wind speed <0.3381 m/s and temperature <23.86°C. Our results encourage the use of meteorological information as a critical component in future risk assessment models.

Persistence of viable MS2 and Phi6 bacteriophages on carpet and dust

Resuspension of dust from flooring is a major source of human exposure to microbial contaminants, but the persistence of viruses on dust and carpet and the contribution to human exposure are often unknown. The goal of this work is to determine viability of MS2 and Phi6 bacteriophages on cut carpet, looped carpet, and house dust both over time and after cleaning. Bacteriophages were nebulized onto carpet or dust in artificial saliva. Viability was measured at 0, 1, 2, 3, 4, 24, and 48 h and after cleaning by vacuum, steam, hot water extraction, and disinfection. MS2 bacteriophages showed slower viability decay rates in dust (-0.11 hr^-1 ), cut carpet (-0.20 hr^-1 ), and looped carpet (-0.09 hr^-1 ) compared to Phi6 (-3.36 hr^-1 , -1.57 hr^-1 , and -0.20 hr^-1 , respectively). Viable viral concentrations were reduced to below the detection limit for steam and disinfection for both MS2 and Phi6 (p < 0.05), while vacuuming and hot water extraction showed no significant changes in concentration from uncleaned carpet (p > 0.05). These results demonstrate that MS2 and Phi6 bacteriophages can remain viable in carpet and dust for several hours to days, and cleaning with heat and disinfectants may be more effective than standard vacuuming.

Presence of SARS-CoV-2 RNA on Surfaces of Public Places and a Transportation System Located in a Densely Populated Urban Area in South America

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a highly transmissible RNA virus that causes COVID-19. Being aware of the presence of the virus on different types of surfaces and in different environments, and having a protocol for its detection, is important to understand the dynamics of the virus and its shedding patterns. In Ecuador, the detection of viral RNA in urban environmental samples has not been a priority. The present study analyzed samples from two densely populated neighborhoods and one public transportation system in Quito, Ecuador. Viral RNA presence was assessed using RT-LAMP. Twenty-eight out of 300 surfaces tested positive for SARS-CoV-2 RNA (9.33%). Frequently touched surfaces, especially in indoor spaces and on public transportation, were most likely to be positive for viral RNA. Positivity rate association for the two neighborhoods and for the surface type was not found. This study found viral RNA presence on urban surfaces; this information provides an insight into viral dissemination dynamics. Monitoring environmental SARS-CoV-2 could support the public health prevention strategies in Quito, Ecuador.

Rapid determination of infectious SARS-CoV-2 in PCR-positive samples by SDS-PMA assisted RT-qPCR

The ongoing COVID-19 pandemic has generated a global health crisis that needs well management of not only patients but also environments to reduce SARS-CoV-2 transmission. The gold standard RT-qPCR method is sensitive and rapid to detect SARS-CoV-2 nucleic acid, but does not answer if PCR-positive samples contain infectious virions. To circumvent this problem, we report an SDS-propidium monoazide (PMA) assisted RT-qPCR method that enables rapid discrimination of live and dead SARS-CoV-2 within 3 h. PMA, a photo-reactive dye, can react with viral RNA released or inside inactivated SARS-CoV-2 virions under assistance of 0.005% SDS, but not viral RNA inside live virions. Formation of PMA-RNA conjugates prevents PCR amplification, leaving only infectious virions to be detected. Under optimum conditions, RT-qPCR detection of heat-inactivated SARS-CoV-2 resulted in larger than 9 Ct value differences between PMA-treated and PMA-free groups, while less than 0.5 Ct differences were observed in the detection of infectious SARS-CoV-2 ranging from 20 to 5148 viral particles. Using a cutoff Ct difference of 8.6, this method could differentiate as low as 8 PFU live viruses in the mixtures of live and heat-inactivated virions. Further experiments showed that this method could successfully monitor the natural inactivation process of SARS-CoV-2 on plastic surfaces during storage with comparable results to the gold standard plaque assay. We believe that the culture-free method established here could be used for rapid and convenient determination of infectious SARS-CoV-2 virions in PCR-positive samples, which will facilitate better control of SARS-CoV-2 transmission.

SARS-CoV-2 and Public Transport in Italy

Although direct contact is considered the main mode of transmission of SARS-CoV-2, environmental factors play an important role. In this study, we evaluated the presence of SARS-CoV-2 on bus and train surfaces. From the buses, we took samples from the following areas: handrails used to enter or exit the bus, stop request buttons and handles next to the seats. From the trains, the sampled surfaces were handrails used to enter or exit the train, door open/close buttons, handles next to the seats, tables and toilet handles. SARS-CoV-2 was detected on 10.7% of the tested surfaces overall, 19.3% of bus surfaces and 2% of train surfaces (p < 0.0001). On the buses, the most contaminated surfaces were the handles near the seats (12.8%), followed by door open/close buttons (12.5%) and handrails (10.5%). Of the five analyzed transport companies, bus companies were the most contaminated, in particular, companies C (40%) and B (23.3%). A greater number of positive samples were found among those taken at 10:00 a.m. and 10:55 a.m. (45% and 40%, respectively). The presence of the virus on many bus surfaces highlights how the sanitation systems on public transport currently in use are not sufficient to limit the spread of SARS-CoV-2.

Functionalized Masks: Powerful Materials against COVID-19 and Future Pandemics

The outbreak of COVID-19 revealed the vulnerability of commercially available face masks. Without having antibacterial/antiviral activities, the current masks act only as filtering materials of the aerosols containing microorganisms. Meanwhile, in surgical masks, the viral and bacterial filtration highly depends on the electrostatic charges of masks. These electrostatic charges disappear after 8 h, which leads to a significant decline in filtration efficiency. Therefore, to enhance the masks' protection performance, fabrication of innovative masks with more advanced functions is in urgent demand. This review summarizes the various functionalizing agents which can endow four important functions in the masks including i) boosting the antimicrobial and self-disinfectant characteristics via incorporating metal nanoparticles or photosensitizers, ii) increasing the self-cleaning by inserting superhydrophobic materials such as graphenes and alkyl silanes, iii) creating photo/electrothermal properties by forming graphene and metal thin films within the masks, and iv) incorporating triboelectric nanogenerators among the friction layers of masks to stabilize the electrostatic charges and facilitating the recharging of masks. The strategies for creating these properties toward the functionalized masks are discussed in detail. The effectiveness and limitation of each method in generating the desired properties are well-explained along with addressing the prospects for the future development of masks.

Home alone? Effect of weather-induced behaviour on spread of SARS-CoV-2 in Germany

In early 2020 the world was struck by the epidemic of novel SARS-CoV-2 virus. Like many others, German government has introduced severe contact restrictions to limit the spread of infection. This paper analyses effects of weather on the spread of the disease under the described circumstances. We demonstrate that regions reported lower growth rates of the number of the infection cases after days with higher temperatures, no rain and low humidity. We argue that this effect is channelled through human behaviour. The evidence suggests that "good" weather attracts individuals to outdoor (safer) environments, thus, deterring people from indoor (less safe) environments. Understanding this relationship is important for improving the measures aiming at combating the spread of the virus.

A systematic review of human coronaviruses survival on environmental surfaces

The current pandemic caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) has led people to implement preventive measures, including surface disinfection and use of alcohol-based hand gel, in order to avoid viral transmission via fomites. However, the role of surface transmission is still debated. The present systematic review aims to summarize all the evidence on surface survival of coronaviruses infecting humans. The analysis of 18 studies showed the longest coronavirus survival time is 28 days at room temperature (RT) on different surfaces: polymer banknotes, vinyl, steel, glass, and paper banknotes. Concerning SARS-CoV-2 human infection from contaminated surfaces, dangerous viral load on surfaces for up to 21 days was determined on polymer banknotes, steel, glass and paper banknotes. For viruses other than SARS-CoV-2, the longest period of survival was 14 days, recorded on glass. Environmental conditions can affect virus survival, and indeed, low temperatures and low humidity support prolonged survival of viruses on contaminated surfaces independently of surface type. Furthermore, it has been shown that exposure to sunlight significantly reduces the risk of surface transmission. Although studies are increasingly investigating the topic of coronavirus survival, it is difficult to compare them, given the methodology differences. For this reason, it is advisable to define a reference working protocol for virus survival trials, but, as an immediate measure, there is also a need for further investigations of coronavirus survival on surfaces.

Evaluation of SARS-CoV-2 viability on experimental surfaces over time

Infected SARS-CoV-2 virus occurs not only through contact with an infected person, but also through surfaces with wich the illnes has contacted. The problem of preserving an infectious virus over time capable of infecting remains actual. We evaluated the SARS-CoV-2 viability preservation on different model surfaces over time. Ceramic tiles, metal (aluminum foil), wood (chipboard), plastic and cloth (towel) were used as model materials. Assessment of the presence of SARS-CoV-2 RNA was carried out by quantitative RT-PCR. Viable virus was determined by tissue culture assay on 293T/ACE2 cells. It was found that the SARS-CoV-2 RNA was detected on all studied surfaces for 360 minutes, but a significant decrease RNA by 1 log10 copies/ml was detected after contact of the virus with cloth (towel). While the viability of the virus was completely lost after 120 minutes. Type of experimental surface significantly affects viability preservation.

Long-Term Exposure to Fine and Coarse Particulate Matter and COVID-19 Incidence and Mortality Rate in Chile during 2020

BACKGROUND

Several countries have documented the relationship between long-term exposure to air pollutants and epidemiological indicators of the COVID-19 pandemic, such as incidence and mortality. This study aims to explore the association between air pollutants, such as PM2.5 and PM10, and the incidence and mortality rates of COVID-19 during 2020.

METHODS

The incidence and mortality rates were estimated using the COVID-19 cases and deaths from the Chilean Ministry of Science, and the population size was obtained from the Chilean Institute of Statistics. A chemistry transport model was used to estimate the annual mean surface concentration of PM2.5 and PM10 in a period before the current pandemic. Negative binomial regressions were used to associate the epidemiological information with pollutant concentrations while considering demographic and social confounders.

RESULTS

For each microgram per cubic meter, the incidence rate increased by 1.3% regarding PM2.5 and 0.9% regarding PM10. There was no statistically significant relationship between the COVID-19 mortality rate and PM2.5 or PM10.

CONCLUSIONS

The adjusted regression models showed that the COVID-19 incidence rate was significantly associated with chronic exposure to PM2.5 and PM10, even after adjusting for other variables.

Multiple relationships between aerosol and COVID-19: A framework for global studies

COVID-19 (Corona Virus Disease 2019) is a severe respiratory syndrome currently causing a human global pandemic. The original virus, along with newer variants, is highly transmissible. Aerosols are a multiphase system consisting of the atmosphere with suspended solid and liquid particles, which can carry toxic and harmful substances; especially the liquid components. The degree to which aerosols can carry the virus and cause COVID-19 disease is of significant research importance. In this study, we have discussed aerosol transmission as the pathway of SARS-CoV-2 (Severe Acute Respiratory Syndrome Coronavirus 2), and the aerosol pollution reduction as a consequence of the COVID-19 lockdown. The aerosol transmission routes of the SARS-CoV-2 can be further subdivided into proximal human-exhaled aerosol transmission and potentially more distal ambient aerosol transmission. The human-exhaled aerosol transmission is a direct dispersion of the SARS-CoV-2. The ambient aerosol transmission is an indirect dispersion of the SARS-CoV-2 in which the aerosol acts as a carrier to spread the virus. This indirect dispersion can also stimulate the up-regulation of the expression of SARS-CoV-2 receptor ACE-2 (Angiotensin Converting Enzyme 2) and protease TMPRSS2 (Transmembrane Serine Protease 2), thereby increasing the incidence and mortality of COVID-19. From the aerosol quality data around the World, it can be seen that often atmospheric pollution has significantly decreased due to factors such as the reduction of traffic, industry, cooking and coal-burning emissions during the COVID-19 lockdown. The airborne transmission potential of SARS-CoV-2, the infectivity of the virus in ambient aerosols, and the reduction of aerosol pollution levels due to the lockdowns are crucial research subjects.

Graphene: A Disruptive Opportunity for COVID-19 and Future Pandemics?

The graphene revolution, which has taken place during the last 15 years, has represented a paradigm shift for science. The extraordinary properties possessed by this unique material have paved the road to a number of applications in materials science, optoelectronics, energy, and sensing. Graphene-related materials (GRMs) are now produced in large scale and have found niche applications also in the biomedical technologies, defining new standards for drug delivery and biosensing. Such advances position GRMs as novel tools to fight against the current COVID-19 and future pandemics. In this regard, GRMs can play a major role in sensing, as an active component in antiviral surfaces or in virucidal formulations. Herein, the most promising strategies reported in the literature on the use of GRM-based materials against the COVID-19 pandemic and other types of viruses are showcased, with a strong focus on the impact of functionalization, deposition techniques, and integration into devices and surface coatings.

Sensitivity of SARS-CoV-2 to different temperatures

This study was designed to investigate the sensitivity of SARS-CoV-2 to different temperatures, to provide basic data and a scientific basis for the control of COVID-19 epidemic. The virus was dispersed in 1 mL basal DMEM medium at a final concentration of 103.2 TCID50/mL and then incubated at 4, 22, 30, 35, 37, 38, 39 and 40°C for up to 5 days. The infectivity of residual virus was titrated using the Vero E6 cell line. The results showed that the virus remained viable for 5 days at 4°C, and for 1 day only at 22 and 30°C. We found that the infectivity of the virus was completely lost after less than 12 hours at 37, 38 and 39°C, while at 40°C, the inactivation time of the virus was rapidly reduced to 6 hours. We show that SARS-CoV-2 is sensitive to heat, is more stable at lower temperatures than higher temperature, remains viable for longer at lower temperatures, and loses viability rapidly at higher temperatures.