Removing microplastics from aquatic environments: A critical review

Turning the tide on microplastic pollution: Leveraging the potential of geopolymers for mitigation

Microplastic pollution represents a significant environmental challenge due to its persistence and role as a vector for harmful contaminants. Conventional mitigation strategies, such as filtration, oxidative degradation, and microbial treatments, often exhibit limitations in efficiency, scalability, or result in the generation of secondary pollutants. This review examines the emerging potential of geopolymers as sustainable materials for microplastic remediation. Owing to their high porosity, chemical stability, tunable surface chemistry, and regenerative properties, geopolymers demonstrate considerable promise as both adsorbents and membrane materials. Extensive research has validated the efficacy of geopolymers in the removal of various environmental contaminants, including heavy metals and organic pollutants. For example, fly ash-based geopolymers modified with cetyltrimethylammonium bromide (CTAB) achieved a 98.2% removal efficiency for anionic acid blue 185 (AB185), while porous amorphous geopolymers synthesized from fly ash and iron ore tailings exhibited a copper (Cu2+) uptake capacity of 113.41 mg/g at 40 °C. These findings underscore the versatility of geopolymers in complex wastewater treatment applications. To date, only one direct study has explored geopolymer application in microplastic removal, demonstrating that silane-modified superhydrophobic geopolymer foam achieved up to 99% removal efficiency for polyethylene microspheres in wastewater. While this result highlights the feasibility of geopolymer-based microplastic remediation, dedicated research in this area remains sparse. This review consolidates existing knowledge on geopolymer interactions with other environmental pollutants to inform potential mechanisms for microplastic remediation. By drawing parallels between the removal of heavy metals and organic pollutants, this work identifies transferable principles and outlines research gaps necessary to advance geopolymer-based solutions for microplastic pollution. Overall, the findings affirm geopolymers' transformative potential in addressing microplastic contamination, while underscoring the urgent need for further experimental and field-based studies in this domain.

Protective effect of curcumin against microplastic and nanoplastics toxicity

Microplastics and nanoplastics (MNPs) are present in urban dust and the aquatic environments of industrialized cities. MNPs in the human body accumulate in the lymphoid follicles, Peyer's patches of the gastrointestinal tract, and pulmonary vascular endothelial cells, which slowly result in toxicity. Since previous studies introduced curcumin as a natural protective agent against environmental toxins, we reviewed preclinical studies that had used curcumin to protect organs or cells from toxicity secondary to exposure to MNPs. It was found that exposure to MNPs resulted in osteolysis, immunotoxicity, thyroid disturbances, nephrotoxicity, neurotoxicity, hepatotoxicity, pulmonary toxicity, gastrointestinal toxicity, cardiovascular toxicity, and especially endocrine, and reproductive toxicity. Nevertheless, except for one study reviewed, curcumin restored all oxidative and histopathological damages induced by MNPs to normal due to curcumin's inherent antioxidant, antiapoptotic, anti-inflammatory, and anti-proliferative properties.

Determining Antimicrobial Resistance in the Plastisphere: Lower Risks of Nonbiodegradable vs Higher Risks of Biodegradable Microplastics

The plastisphere is a potential contributor to global antimicrobial resistance (AMR), posing potential threats to public and environmental health. However, comprehensively quantifying the contribution of microplastics with different biodegradability to AMR is lacking. In this study, we systematically quantified AMR risk mediated by biodegradable and nonbiodegradable microplastics using abundance-based methods and a custom AMR risk ranking framework that includes antimicrobial resistance genes (ARGs) abundance, mobility, and host pathogenicity. Our results demonstrated that biodegradable microplastics exhibited higher AMR risk compared to that of nonbiodegradable plastics. Key resistance genes, including those for multidrug, bacitracin, and aminoglycoside resistance, were predominant. Machine learning analysis identified cell motility as the most significant signature associated with AMR risk, highlighting its potential role in promoting ARGs dissemination. In addition, biodegradable microplastics promoted oxidative stress and SOS responses, which likely enhanced horizontal gene transfer (HGT) and AMR. Metagenome-assembled genomes (MAGs) analysis uncovered the colocalization of microplastic degradation genes, ARGs, and virulence factors (VFs), further supporting the elevated risk in biodegradable plastisphere. The proximity of ARGs to mobile genetic elements (MGEs) suggests that microplastic degradation processes might favor ARGs mobility. These findings would contribute critical insights into AMR dissemination in the plastisphere, emphasizing the need for integrated environmental and public health strategies under the context of One Health.

The transport of polystyrene microplastics in saturated porous media: Impacts of functional groups and solution chemistry

Global attention to microplastics (MPs) pollution has been increasing as it has become a novel environmental issue. Natural aging processes alter MPs surface properties, introducing charged functional groups that affect their transport in porous media. This study investigated the transport of polystyrene microplastics (PSMPs) in saturated porous media through column experiments, including non-functionalized PSMPs (PS-Bare), carboxyl-modified PSMPs (PS-COOH), and amino-modified PSMPs (PS-NH2). Unlike previous studies focusing on pristine microplastics, our research integrated the effects of surface functionalization with complex solution chemistry, including ionic strength, cation valence, and pH. Results indicated that surface functional groups and solution chemistry combined to impact PSMPs migration through zeta potential and hydrodynamic size. Increasing ionic strength decreased migration rates due to double-layer compression and charge screening. Higher cation valence and lower pH decreased PS-Bare and PS-COOH migration rates, while PS-NH2 showed the opposite trend due to differences in surface charges. As pH increased, carboxyl groups dissociated, enhancing the negative charge on PS-COOH and promoting its migration, while amino groups deprotonated, reducing the positive charge on PS-NH2 and inhibiting its migration. PS-NH2 exhibited higher mobility than expected. Despite its positive charge, PS-NH2 preferentially occupied active sites on sand surfaces, reducing aggregation and enhancing transport. In the presence of Al3+, PSMPs recovery rates were PS-NH2 (94.60%) > PS-COOH (41.48%) > PS-Bare (41.12%). This study enhances understanding of functionalized microplastics transport and its potential impact on groundwater contamination.

Biophysics-guided uncertainty-aware deep learning uncovers high-affinity plastic-binding peptides

Plastic pollution, particularly microplastics (MPs), poses a significant global threat to ecosystems and human health, necessitating innovative remediation strategies. Biocompatible and biodegradable plastic-binding peptides (PBPs) offer a potential solution through targeted adsorption and subsequent MP detection or removal from the environment. A challenge in discovering plastic-binding peptides is the vast combinatorial space of possible peptides (i.e., over 1015 for 12-mer peptides), which far exceeds the sample sizes typically reachable by experiments or biophysics-based computational methods. One step towards addressing this issue is to train deep learning models on experimental or biophysical datasets, permitting faster and cheaper evaluations of peptides. However, deep learning predictions are not always accurate, which could waste time and money due to synthesizing and evaluating false positives. Here, we resolve this issue by combining biophysical modeling data from Peptide Binder Design (PepBD) algorithm, the predictive power and uncertainty quantification of evidential deep learning, and metaheuristic search methods to identify high-affinity PBPs for several common plastics. Molecular dynamics simulations show that the discovered PBPs have greater median adsorption free energies for polyethylene (5%), polypropylene (18%), and polystyrene (34%) relative to PBPs previously designed by PepBD. The impact of including uncertainty quantification in peptide design is demonstrated by the increasing improvement in the median adsorption free energy with decreasing uncertainty. This robust framework accelerates peptide discovery, paving the way for effective, bio-inspired solutions to MP remediation.

Towards sustainable microplastic cleanup: Al/Fe ionotropic chitosan hydrogels for efficient PET removal

Chitosan (CHI) was modified with iron and aluminum salts to create ionotropic beads, Fe-CHI and Al-CHI, for the removal of polyethylene terephthalate microplastics (PET-MP) from water. Infrared spectroscopy revealed reduced hydrogen bonding associated with N-H vibration of CHI (3500-3100 cm-1) due to the interaction with the metal ions, and absorption peaks between 500 and 916 cm⁻1 predominantly due to metal-oxygen stretching vibrations. The swelling behavior of the beads increased with temperature but decreased as pH and metal doping concentration increased. Conductivity and PET-MP removal efficiency improved with higher metal ion concentrations, with Al-CHI exhibiting greater swelling and conductivity compared to Fe-CHI. The highest efficiency for MP remediation was recorded at low pH levels. MP adsorption decreased with rising temperatures and varied with pH changes due to protonation and deprotonation reactions of CHI, along with the various cationic and anionic species formed by the metals. At pH 7, MP removal by Fe-CHI beads declined as the doping concentration increased, attributed to specific Fe species that emerged at this pH. The zeta potential measurements showed that both the beads and the MP were in an unstable range at low pH but shifted towards stability at higher pH levels. Re-adsorption efficiencies exceeded 70% for both low and high-doped Fe-CHI and Al-CHI beads when tested with ~ 40 MP/mL of MP suspension over three different cycles. Overall, the use of ionotropic CHI beads offers a promising, eco-friendly method for effectively reducing PET-MPs in water.

Collaborative removal of microplastics, bacteria, antibiotic resistance genes, and heavy metals in a full-scale wastewater treatment plant

Plastics are used in large quantities in food packaging and industrial products in China, which results in ecological risks of microplastics (MPs) to the environment. In this study, the MPs' removal efficiency of a full-scale wastewater treatment plant (WWTP) and the internal interaction of microorganisms, antibiotic resistance genes (ARGs), and heavy metals with MPs were investigated. The dominant MPs in urban sewage were polyurethane (PU), acrylate copolymer (ACR), fluororubber, and polyethylene. MPs in wastewater were removed by WWTP with a total efficiency of 76%. The removal efficiencies of ACR, ethylene-vinyl acetate copolymer, polybutadiene, poly(tetrafluoroethylene), polystyrene, and polypropylene reached 100%. The highest concentration of MPs PU in the influent got a removal efficiency of 93.41%. The interactions between MPs, heavy metals, microorganisms, and ARGs involved adsorption, hydrogen bonds, coprecipitation, and polar interaction. Heavy metals and MPs formed larger aggregated particles, which were removed in the primary process. Heavy metals accumulated in sludge pose ecological risks to soil during landfill or compost to fertilizer. The release of MPs from WWTPs leads to accumulation in organisms and soil. It may affect the entire food chain and promote the transmission of ARGs in the environment, posing potential threats to the entire ecosystem.

Coagulation performance and mechanism of different novel covalently bonded organic silicon-aluminum/iron composite coagulant for As(V) removal from water: The role of hydrolysate species and the effect of coexisting microplastics

Arsenate [As(V)] pollution is a challenge for water treatment, and the effect of coexisting microplastics (MPs) on As(V) removal is still not clear. In this study, series novel covalently bonded organic silicon-aluminum/iron composite coagulants (CSA/F) with different Al/Fe molar ratios were prepared for enhancing As(V) removal. The effect mechanism of MPs (PS MPs and PS-COOH MPs) on As(V) removal by using CSAF coagulation was analyzed. CSAF and CSF showed significantly better As(V) removal performance than other coagulants under the same conditions, especially CSF, more than 90 % As(V) removal was achieved at dosage of 20 mg/L and pH of 4.0-8.0. Interestingly, the introduction of silane coupling agent and the increase of Fe content in CSA/F changed the Al/Fe species distribution. Charge neutralization dominant in As(V) removal by using CSA, whereas adsorption and net sweeping contributed to As(V) coagulation by using CSAF and CSF with higher iron proportion at neutral pH. 3 µm MPs were removed by net sweeping of amorphous Al/Fe hydroxides, while 26 µm MPs were charge-neutralized or surface adsorbed by coagulant hydrolysates. The aliphatic C-H and -COOH functional groups of MPs were the main sites of hydrogen bonding adsorption with the hydroxyl groups of coagulant hydrolysates. This study is conducive to mitigating the environmental toxicity of arsenic and provides new insights into the interaction mechanism between composite pollutants and coagulants in waters.

Integrating the quintuple helix approach into atmospheric microplastics management policies for planetary health preservation

Microplastic pollution has become a major global environmental issue, negatively impacting terrestrial and aquatic ecosystems as well as human health. Tackling this complex problem necessitates a multidisciplinary approach and collaboration among diverse stakeholders. Within this context, the Quintuple Helix framework, which highlights the involvement of academia, government, industry, civil society, and the environment, provides a comprehensive and inclusive perspective for formulating effective policies to manage atmospheric microplastics. This paper discusses each helix's roles, challenges, and opportunities and proposes strategies for collaboration and knowledge exchange among them. Furthermore, the paper highlights the importance of interdisciplinary research, innovative technologies, public awareness campaigns, regulatory frameworks, and corporate responsibility in achieving sustainable and resilient microplastic management policies. The Quintuple Helix approach can mitigate microplastics, safeguard ecosystems, and preserve planetary health by fostering collaboration and coordination among diverse stakeholders.

An in-depth analysis of microbial response to exposure to high concentrations of microplastics in anaerobic wastewater fermentation

The impact of microplastics (MPs) in anaerobic wastewater treatment on microbial metabolism is significant. Anaerobic granular sludge (AS) and biofilm (BF) are two common ways, and their responses to microplastics will have a direct impact on their application potential. This study investigated the microbial reactions of AS and BF to three types of MPs: polyethylene (PE), polyvinyl chloride (PVC), and a mixture of both (MIX). Results exhibited that MPs reduced methane output by 44.65 %, 55.89 %, and 53.18 %, elevated short-chain fatty acid (SCFA) levels by 95.93 %, 124.49 %, and 110.78 %, and lowered chemical oxygen demand (COD) removal by 28.77 %, 36.78 %, and 33.99 % for PE-MP, PVC-MP, and MIX-MP, respectively, with PVC-MP showing the greatest inhibition. Meanwhile, microplastics also facilitated the relative production of reactive oxygen species (ROS, 40.29 %-96.99 %), lactate dehydrogenase (LDH, 20.01 %-75.02 %), and adenosine triphosphate (ATP, 26.64 %-43.80 %), while reducing cytochrome c (cyt c, 23.60 %-49.02 %) and extracellular polymeric substances (EPS, 17.44 %-26.58 %). AS and BF displayed distinct enzymatic activities under MPs exposure. Correspondingly, 16S-rRNA sequencing indicated that AS was mainly involved in acetate generation by Firmicutes, while BF performed polysaccharide degradation by Bacteroidota. Metatranscriptomic analysis showed AS to be rich in acetogens (Bacillus, Syntrophobacter) and methanogens (Methanothrix, Methanobacterium), while BF contained more fermentation bacteria (Mesotoga, Lentimicrobium) and electroactive microorganisms (Clostridium, Desulfuromonas) under MIX-MP. Moreover, BF exhibited higher glycolysis gene expression, whereas AS was more active in methane metabolism, primarily through the acetoclastic methanogenic pathway's direct acetate conversion. This study provides new insights into understanding the microbial response produced by microplastics during anaerobic wastewater digestion.

Impacts of microplastics on ecosystem services and their microbial degradation: a systematic review of the recent state of the art and future prospects

Microplastics are tiny plastic particles with a usual diameter ranging from ~ 1 μ to 5 µm. Recently, microplastic pollution has raised the attention of the worldwide environmental and human concerns. In human beings, digestive system illness, respiratory system disorders, sleep disturbances, obesity, diabetes, and even cancer have been reported after microplastic exposure either through food, air, or skin. Similarly, microplastics are also having negative impacts on the plant health, soil microorganisms, aquatic lives, and other animals. Policies and initiatives have already been in the pipeline to address this problem to deal with microplastic pollution. However, many obstacles are also being observed such as lack of knowledge, lack of research, and also absence of regulatory frameworks. This article has covered the distribution of microplastics in water, soil, food and air. Application of multimodel strategies including fewer plastic item consumption, developing low-cost novel technologies using microorganisms, biofilm, and genetic modified microorganisms has been used to reduce microplastics from the environment. Researchers, academician, policy-makers, and environmentalists should work jointly to cope up with microplastic contamination and their effect on the ecosystem as a whole which can be reduced in the coming years and also to make earth clean.

A critical review of microplastics in aquatic ecosystems: Degradation mechanisms and removing strategies

Plastic waste discarded into aquatic environments gradually degrades into smaller fragments, known as microplastics (MPs), which range in size from 0.05 to 5 mm. The ubiquity of MPs poses a significant threat to aquatic ecosystems and, by extension, human health, as these particles are ingested by various marine organisms including zooplankton, crustaceans, and fish, eventually entering the human food chain. This contamination threatens the entire ecological balance, encompassing food safety and the health of aquatic systems. Consequently, developing effective MP removal technologies has emerged as a critical area of research. Here, we summarize the mechanisms and recently reported strategies for removing MPs from aquatic ecosystems. Strategies combining physical and chemical pretreatments with microbial degradation have shown promise in decomposing MPs. Microorganisms such as bacteria, fungi, algae, and specific enzymes are being leveraged in MP remediation efforts. Recent advancements have focused on innovative methods such as membrane bioreactors, synthetic biology, organosilane-based techniques, biofilm-mediated remediation, and nanomaterial-enabled strategies, with nano-enabled technologies demonstrating substantial potential to enhance MP removal efficiency. This review aims to stimulate further innovation in effective MP removal methods, promoting environmental and social well-being.

Microplastics in marine ecosystems: A comprehensive review of biological and ecological implications and its mitigation approach using nanotechnology for the sustainable environment

Microplastic contamination has rapidly become a serious environmental issue, threatening marine ecosystems and human health. This review aims to not only understand the distribution, impacts, and transfer mechanisms of microplastic contamination but also to explore potential solutions for mitigating its widespread impact. This review encompasses the categorisation, origins, and worldwide prevalence of microplastics and methodically navigates the complicated structure of microplastics. Understanding the sources of minute plastic particles infiltrating water bodies worldwide is critical for successful removal. The presence and accumulation of microplastics has far reaching negative impacts on various marine creatures, eventually extending its implications to human health. Microplastics are known to affect the metabolic activities and the survival of microbial communities, phytoplankton, zooplankton, and fauna present in marine environments. Moreover, these microplastics cause developmental abnormalities, endocrine disruption, and several metabolic disorders in humans. These microplastics accumulates in aquatic environments through trophic transfer mechanisms and biomagnification, thereby disrupting the delicate balance of these ecosystems. The review also addresses the tactics for minimising the widespread impact of microplastics by suggesting practical alternatives. These include increasing public awareness, fostering international cooperation, developing novel cleanup solutions, and encouraging the use of environment-friendly materials. In conclusion, this review examines the sources and prevalence of microplastic contamination in marine environment, its impacts on living organisms and ecosystems. It also proposes various sustainable strategies to mitigate the problem of microplastics pollution. Also, the current challenges associated with the mitigation of these pollutants have been discussed and addressing these challenges require immediate and collective action for restoring the balance in marine ecosystems.

Meta-ecosystem Frameworks Can Enhance Control of the Biotic Transport of Microplastics

The lack of systematic approaches and analyses to identify, quantify, and manage the biotic transport of microplastics (MPs) along cross-ecosystem landscapes prevents the current goals of sustainable environmental development from being met. This Perspective proposes a meta-ecosystem framework, which considers organismal and resource flows among ecosystems to shed light on the research and management challenges related to both abiotic and biotic MP transport at landscape levels. We discuss MP transport pathways through species movements and trophic transfers among ecosystems and sub-ecosystems, and highlight these pathways in the mitigation of MP pollution. The integration of biotic pathways across landscapes prioritizes management actions for MP transport using diverse approaches such as wastewater treatment and plastic removal policies to mitigate contamination. In addition, our framework emphasizes the potential sink enhancement of MPs through habitat conservation and enhancement of riparian vegetation. By considering the mechanisms of meta-ecosystem dynamics through the processes of biotic dispersal, accumulation, and the ultimate fate of MPs, advances in the environmental impact assessment and management of MP production can proceed more effectively.

Mitigating Dietary Microplastic Accumulation and Oxidative Stress Response in European Seabass (Dicentrarchus labrax) Juveniles Using a Natural Microencapsulated Antioxidant

Aquafeed's contamination by microplastics can pose a risk to fish health and quality since they can be absorbed by the gastrointestinal tract and translocate to different tissues. The liver acts as a retaining organ with the consequent triggering of oxidative stress response. The present study aimed to combine the use of natural astaxanthin with natural-based microcapsules to counteract these negative side effects. European seabass juveniles were fed diets containing commercially available fluorescent microplastic microbeads (1-5 μm; 50 mg/kg feed) alone or combined with microencapsulated astaxanthin (AX) (7 g/kg feed; tested for half or whole feeding trial-30 or 60 days, respectively). Fish from the different dietary treatments did not evidence variations in survival and growth performance and did not show pathological alterations at the intestinal level. However, the microplastics were absorbed at the intestinal level with a consequent translocation to the liver, leading, when provided solely, to sod1, sod2, and cat upregulation. Interestingly, the dietary implementation of microencapsulated AX led to a mitigation of oxidative stress. In addition, the microcapsules, due to their composition, promoted microplastic coagulation in the fish gut, limiting their absorption and accumulation in all the tissues analyzed. These results were supported by in vitro tests, which demonstrated that the microcapsules promoted microplastic coagula formation too large to be absorbed at the intestinal level and by the fact that the coagulated microplastics were released through the fish feces.

Bioelectrochemical anaerobic digestion mitigates microplastic pollution and promotes methane recovery of wastewater treatment in biofilm system

Bioelectrochemical systems (BES) offer significant potential for treating refractory waste and recovering bioenergy. However, their ability to mitigate microplastic pollution in wastewater remains unexplored. This study showed that BES facilitated the treatment of polyethylene (PE), polyvinyl chloride (PVC), and Mix (PE+PVC) microplastic wastewater and the methane recovery (40.61%, 20.02%, 21.19%, respectively). The lactate dehydrogenase (LDH), adenosine triphosphate (ATP), cytochrome c, and nicotinamide adenine dinucleotide (NADH/NAD+) ratios were elevated with electrical stimulation. Moreover, the applied voltage improved the polysaccharides content of the extracellular polymeric substances (EPS) in the PE-BES but decreased in PVC-BES, while the proteins showed the opposite trend. Metatranscriptomic sequencing showed that the abundance of fermentation bacteria, acetogens, electrogens, and methanogens was greatly enhanced by applying voltage, especially at the anode. Methane metabolism was dominated by the acetoclastic methanogenic pathway, with the applied voltage promoting the enrichment of Methanothrix, resulting in the direct conversion of acetate to acetyl-CoA via acetate-CoA ligase (EC: 6.2.1.1), and increased metabolic activity in the anode. Moreover, applied voltage greatly boosted the function genes expression level related to energy metabolism, tricarboxylic acid (TCA) cycle, electron transport, and transporters on the anode biofilm. Overall, these results demonstrate that BES can mitigate microplastic pollution during wastewater treatment.

Photocatalytic systems: reactions, mechanism, and applications

The photocatalytic field revolves around the utilization of photon energy to initiate various chemical reactions using non-adsorbing substrates, through processes such as single electron transfer, energy transfer, or atom transfer. The efficiency of this field depends on the capacity of a light-absorbing metal complex, organic molecule, or substance (commonly referred to as photocatalysts or PCs) to execute these processes. Photoredox techniques utilize photocatalysts, which possess the essential characteristic of functioning as both an oxidizing and a reducing agent upon activation. In addition, it is commonly observed that photocatalysts exhibit optimal performance when irradiated with low-energy light sources, while still retaining their catalytic activity under ambient temperatures. The implementation of photoredox catalysis has resuscitated an array of synthesis realms, including but not limited to radical chemistry and photochemistry, ultimately affording prospects for the development of the reactions. Also, photoredox catalysis is utilized to resolve numerous challenges encountered in medicinal chemistry, as well as natural product synthesis. Moreover, its applications extend across diverse domains encompassing organic chemistry and catalysis. The significance of photoredox catalysts is rooted in their utilization across various fields, including biomedicine, environmental pollution management, and water purification. Of course, recently, research has evaluated photocatalysts in terms of cost, recyclability, and pollution of some photocatalysts and dyes from an environmental point of view. According to these new studies, there is a need for critical studies and reviews on photocatalysts and photocatalytic processes to provide a solution to reduce these limitations. As a future perspective for research on photocatalysts, it is necessary to put the goals of researchers on studies to overcome the limitations of the application and efficiency of photocatalysts to promote their use on a large scale for the development of industrial activities. Given the significant implications of the subject matter, this review seeks to delve into the fundamental tenets of the photocatalyst domain and its associated practical use cases. This review endeavors to demonstrate the prospective of a powerful tool known as photochemical catalysis and elucidate its underlying tenets. Additionally, another goal of this review is to expound upon the various applications of photocatalysts.

Ecotoxicological evaluation of chitosan biopolymer films particles in adult zebrafish (Danio rerio): A comparative study with polystyrene microplastics

To mitigate the environmental impact of microplastics (MPs), the scientific community has innovated sustainable and biodegradable polymers as viable alternatives to traditional plastics. Chitosan, the deacetylated form of chitin, stands as one of the most thoroughly investigated biopolymers and has garnered significant interest due to its versatile applications in both medical and cosmetic fields. Nevertheless, there is still a knowledge gap regarding the impact that chitosan biopolymer films (CBPF) may generate in aquatic organisms. In light of the foregoing, this study aimed to assess and compare the potential effects of CBPF on the gastrointestinal tract, gills, brain, and liver of Danio rerio against those induced by MPs. The findings revealed that both CBPF and MPs induced changes in the levels of oxidative stress biomarkers across all organs. However, it is essential to note that our star plots illustrate a tendency for CBPF to activate antioxidant enzymes and for MPs to produce oxidative damage. Regarding gene expression, our findings indicate that MPs led to an up-regulation in the expression of genes associated with apoptotic response (p53, casp3, cas9, bax, and bcl2) in all fish organs. Meanwhile, CBPF produced the same effect in genes related to antioxidant response (nrf1 and nrf2). Overall, our histological observations substantiated these effects, revealing the presence of plastic particles and tissue alterations in the gills and gastrointestinal tract of fish subjected to MPs. From these results, it can be concluded that CBPF does not represent a risk to fish after long exposure.

Unraveling the nexus: Microplastics, antibiotics, and ARGs interactions, threats and control in aquaculture - A review

In recent years, aquaculture has expanded rapidly to address food scarcity and provides high-quality aquatic products. However, this growth has led to the release of significant effluents, containing emerging contaminants like antibiotics, microplastics (MPs), and antibiotic resistance genes (ARGs). This study investigated the occurrence and interactions of these pollutants in aquaculture environment. Combined pollutants, such as MPs and coexisting adsorbents, were widespread and could include antibiotics, heavy metals, resistance genes, and pathogens. Elevated levels of chemical pollutants on MPs could lead to the emergence of resistance genes under selective pressure, facilitated by bacterial communities and horizontal gene transfer (HGT). MPs acted as vectors, transferring pollutants into the food web. Various technologies, including membrane technology, coagulation, and advanced oxidation, have been trialed for pollutants removal, each with its benefits and drawbacks. Future research should focus on ecologically friendly treatment technologies for emerging contaminants in aquaculture wastewater. This review provided insights into understanding and addressing newly developing toxins, aiming to develop integrated systems for effective aquaculture wastewater treatment.

Nano revolution: pioneering the future of water reclamation with micro-/nano-robots

Earth's freshwater reserves are alarmingly limited, with less than 1% readily available. Factors such as industrialisation, population expansion, and climate change are compounding the scarcity of clean water. In this context, self-driven, programmable micro- and nano-scale synthetic robots offer a potential solution for enhancing water monitoring and remediation. With the aid of these innovative robots, diffusion-limited reactions can be overcome, allowing for active engagement with target pollutants, such as heavy metals, dyes, nano- and micro-plastics, oils, pathogenic microorganisms, and persistent organic pollutants. Herein, we introduced and reviewed recent influential and advanced studies on micro-/nano-robots (MNR) carried out over the past decade. Typical works are categorized by propulsion modes, analyzing their advantages and drawbacks in detail and looking at specific applications. Moreover, this review provides a concise overview of the contemporary advancements and applications of micro-/nano-robots in water-cleaning applications.

Synthesis and preliminary evaluation of Ag-TiO2/CNT hybrid nanocomposite for the degradation of polystyrene microplastics under solar irradiation

Currently, microplastics (MPs) are considered as emerging aqueous pollutants. However, existing methods for the separation and treatment of MPs from an aquatic environment are limited by their low efficiency. Advanced oxidation processes (AOPs) are novel techniques that employ photo-induced electron/hole pairs to generate active radicals for MP mineralization. Thus, in this study, a photocatalyst, i.e., Ag+ ion-doped TiO2, heterojunctioned with carbon nanotubes (CNT), was synthesized to study the degradation of typical MPs such as polystyrene (PS) under solar irradiation. Effectiveness of the prepared photocatalyst for the PS degradation was estimated through FESEM, FTIR, total organic carbon (TOC) analyzer, and gas chromatography-mass spectroscopy (GC-MS). Quantitatively, 31.7% degradation of PS microbeads was achieved within 48 h. Therefore, this study provides an efficient and cost-effective strategy for the degradation of MPs from the aqueous medium.

Microplastics and associated chemicals in drinking water: A review of their occurrence and human health implications

Microplastics (MPs) have entered drinking water (DW) via various pathways, raising concerns about their potential health impacts. This study provides a comprehensive review of MP-associated chemicals, such as oligomers, plasticizers, stabilizers, and ultraviolet (UV) filters that can be leached out during DW treatment and distribution. The leaching of these chemicals is influenced by various environmental and operating factors, with three major ones identified: MP concentration and polymer type, pH, and contact time. The leaching process is substantially enhanced during the disinfection step of DW treatment, due to ultraviolet light and/or disinfectant-triggered reactions. The study also reviewed human exposure to MPs and associated chemicals in DW, as well as their health impacts on the human nervous, digestive, reproductive, and hepatic systems, especially the neuroendocrine toxicity of endocrine-disrupting chemicals. An overview of MPs in DW, including tap water and bottled water, was also presented to enable a background understanding of MPs-associated chemicals. In short, certain chemicals leached from MPs in DW can have significant implications for human health and demand further research on their long-term health impacts, mitigation strategies, and interactions with other pollutants such as disinfection byproducts (DBPs) and per- and polyfluoroalkyl substances (PFASs). This study is anticipated to facilitate the research and management of MPs in DW and beverages.

Interactions between MPs and PFASs in aquatic environments: A dual-character situation

Microplastics (MPs) and per- and polyfluoroalkyl substances (PFASs) have drawn great attention as emerging threats to aquatic ecosystems. Although the literature to study the MPs and PFASs alone has grown significantly, our knowledge of the overlap and interactions between the two contaminations is scarce due to the unawareness of it. Actually, numerous human activities can simultaneously release MPs and PFASs, and the co-sources of the two are common, meaning that they have a greater potential for interactions. The direct interaction lies in the PFASs adsorption by MPs in water with integrated mechanisms including electrostatic and hydrophobic interactions, plus many influence factors. In addition, the existence and transportation of MPs and PFASs in the aquatic environment have been identified. MPs and PFASs can be ingested by aquatic organisms and cause more serious combined toxicity than exposure alone. Finally, curbing strategies of MPs and PFASs are overviewed. Wastewater treatment plants (WWTPs) can be an effective place to remove MPs from wastewater, while they are also an important point source of MPs pollution in water bodies. Although adsorption has proven to be a successful curbing method for PFASs, more technological advancements are required for field application. It is expected that this review can help revealing the unheeded relationship and interaction between MPs and PFASs in aquatic environments, thus assisting the further investigations of both MPs and PFASs as a whole.

Using Spirulina platensis as a natural biocoagulant for polystyrene removal from aqueous medium: performance, optimization, and modeling

Microplastics (MPs) are newly recognized contaminants that result from the breakdown of plastics released into aquatic environments. This study focuses on the elimination of polystyrene (PS) using S. platensis, a natural biocoagulant, from aqueous solutions. The research investigated several crucial variables, including the initial level of PS ranging from 100 to 900 mg L-1, pH levels from 4 to 10, the contact time of 20-40 min, and doses of S. platensis ranging from 50 to 250 mg L-1. The analysis of the data revealed that the quadratic model offered the best fit for the experimental results. In the present study, we utilized S. platensis as a novel natural biocoagulant to effectively eliminate PS from aqueous solutions. Process optimization was performed using a Box-Behnken design (BBD). The best-fitting model for the data was the quadratic model. The results displayed that the highest elimination of PS (81%) was occurred at a pH of 4, with a contact time of 30 min, a dose of S. platensis at 250 mg L-1, and a PS concentration of 500 mg L-1. These findings show that S. platensis has a significant effect on removing PS from the aquatic environment. Algae can serve as a convenient and eco-friendly method, replacing chemical coagulants, to effectively remove MPs from the aquatic environment.

Application of advanced oxidation processes for the removal of micro/nanoplastics from water: A review

Micro/nanoplastics (MNPs) have been increasingly found in environments, food, and organisms, arousing wide public concerns. MNPs may enter food chains through water, posing a threat to human health. Therefore, efficient and environmentally friendly technologies are needed to remove MNPs from contaminated aqueous environments. Advanced oxidation processes (AOPs) produce a vast amount of active species, such as hydroxyl radicals (·OH), known for their strong oxidation capacity. As a result, an increasing number of researchers have focused on using AOPs to decompose and remove MNPs from water. This review summarizes the progress in researches on the removal of MNPs from water by AOPs, including ultraviolet photolysis, ozone oxidation, photocatalysis, Fenton oxidation, electrocatalysis, persulfate oxidation, and plasma oxidation, etc. The removal efficiencies of these AOPs for MNPs in water and the influencing factors are comprehensively analyzed, meanwhile, the oxidation mechanisms and reaction pathways are also discussed in detail. Most AOPs can achieve the degradation of MNPs, mainly manifest as the decrease of particle size and the increase of mass loss, but the mineralization rate is low, thus requiring further optimization for improved performance. Investigating various AOPs is crucial for achieving the complete decomposition of MNPs in water. AOPs will undoubtedly play a vital role in the future for the removal of MNPs from water.

Phytoremediation: A promising approach to remove microplastics from the aquatic environment

Due to the increasing amount of microplastics (MPs) in the environment, various technologies for their removal have been investigated. One of the possible technologies are phytoremediation methods, but insufficient understanding of the interactions between MPs and aquatic macrophytes limits their further development. In this context, the aim of this study was to investigate the interactions between polyethylene MPs and the floating aquatic macrophyte Lemna minor in terms of the extent and time frame of MPs adhesion to the plant biomass, the stability of the interactions under water movement and understanding the nature of the adsorption process through the adsorption isotherm models. The results showed that the maximum number of adhered MPs was reached after 24 h. With increased amount of plant biomass the number of adhered MPs increased as well. Slow movement of water had no statistically significant effect on the adhesion of MPs. Among several adsorption models, the Freundlich adsorption isotherm model was the best fit to the experimental data, which assumes weak binding of MPs to plant biomass. Finally, 79% of MPs was removed during 15 cycles of phytoremediation (i.e., the biomass was removed and replaced with new biomass 15 times) and it was calculated that 53 cycles would be needed to remove all MPs from the water phase under test conditions.

Photocatalytic degradation of different types of microplastics by TiOx/ZnO tetrapod photocatalysts

We investigated the use of titania coated ZnO tetrapods for photocatalytic degradation of two common types of microplastics, namely polyethylene (PE) microparticles and polyester (PES) microfibers. We found that the plastics morphology affects the rate of degradation, and that the use of electron scavengers is needed to maintain the reactivity of the photocatalysts over a prolonged period of time. Complete mass loss of PE and PES is achieved under UV illumination for 480 h and 624 h, respectively. In addition to pristine microplastics, the degradation of environmental microplastics sample (consisting primarily of polypropylene) was also demonstrated, though in this case longer degradation time (∼816 h) was needed to achieve complete mass loss of the samples.

The first evidence of microplastic occurrence in mine water: The largest black coal mining area in the Czech Republic

Climate change is creating new challenges for water supply worldwide, making the search for new sources of water vital. As mine water could serve as a potential source, this study investigated the presence of microplastics in water from terminated deep mines in the largest coal basin in the Czech Republic, as well as in water from nearby shallow wells. The particles found were analyzed for size, polymer composition, color and morphology using the ImageJ tool, infrared spectroscopy with Fourier transform (FTIR) and an optical stereomicroscope with a digital camera. Microplastics were detected in all tested sites. Their range accounted for 2.5-17.5 items/L for mine water samples and 2.5-20 items/L for well samples, with fibers being the dominant type. The average width of particles from mine water and wells amounted to 58 µm; 71 µm, length to 655 µm; 501 µm and area to 22,067 µm2; 28,613 µm2, respectively. Blue color was prevalent, among materials, in both cases, plastic coated paper was found dominant to Polyethylene terephthalate (PET), Polyester (PES), Tetrafluoroethylene-perfluoro (Propyl Vinyl Ether) - Copolymer (TFE-PPVE), and polypropylene (PP). The research provides the first evidence of microplastics' presence in underground waters from deep mines and shallow wells in the same area. The data suggest that it is almost impossible to find underground water sources free of microplastic contamination. In this context, atmospheric contamination from mine ventilation and infiltration through terminated mines were identified as potential sources, while infiltration through soil and rock formations is unlikely given the geological composition. The results of this study can serve as a relevant basis for further research on microplastics in mine waters. Additionally, the conclusions can advance the development in remediation technologies of microplastics from deep underground waters and their implementation in practice, particularly in light of upcoming legislation.

Recent advances towards micro(nano)plastics research in wetland ecosystems: A systematic review on sources, removal, and ecological impacts

In recent years, microplastics/nanoplastics (MPs/NPs) have received substantial attention worldwide owing to their wide applications, persistence, and potential risks. Wetland systems are considered to be an important "sink" for MPs/NPs, which can have potential ecological and environmental effects on the ecosystem. This paper provides a comprehensive and systematic review of the sources and characteristics of MPs/NPs in wetland ecosystems, together with a detailed analysis of MP/NP removal and associated mechanisms in wetland systems. In addition, the eco-toxicological effects of MPs/NPs in wetland ecosystems, including plant, animal, and microbial responses, were reviewed with a focus on changes in the microbial community relevant to pollutant removal. The effects of MPs/NPs exposure on conventional pollutant removal by wetland systems and their greenhouse gas emissions are also discussed. Finally, current knowledge gaps and future recommendations are presented, including the ecological impact of exposure to various MPs/NPs on wetland ecosystems and the ecological risks of MPs/NPs associated with the migration of different contaminants and antibiotic resistance genes. This work will facilitate a better understanding of the sources, characteristics, and environmental and ecological impacts of MPs/NPs in wetland ecosystems, and provide a new perspective to promote development in this field.

Insights into Anthropogenic Micro- and Nanoplastic Accumulation in Drinking Water Sources and Their Potential Effects on Human Health

Anthropogenic microplastics (MPs) and nanoplastics (NPs) are ubiquitous pollutants found in aquatic, food, soil and air environments. Recently, drinking water for human consumption has been considered a significant pathway for ingestion of such plastic pollutants. Most of the analytical methods developed for detection and identification of MPs have been established for particles with sizes > 10 μm, but new analytical approaches are required to identify NPs below 1 μm. This review aims to evaluate the most recent information on the release of MPs and NPs in water sources intended for human consumption, specifically tap water and commercial bottled water. The potential effects on human health of dermal exposure, inhalation, and ingestion of these particles were examined. Emerging technologies used to remove MPs and/or NPs from drinking water sources and their advantages and limitations were also assessed. The main findings showed that the MPs with sizes > 10 μm were completely removed from drinking water treatment plants (DWTPs). The smallest NP identified using pyrolysis-gas chromatography-mass spectrometry (Pyr-GC/MS) had a diameter of 58 nm. Contamination with MPs/NPs can occur during the distribution of tap water to consumers, as well as when opening and closing screw caps of bottled water or when using recycled plastic or glass bottles for drinking water. In conclusion, this comprehensive study emphasizes the importance of a unified approach to detect MPs and NPs in drinking water, as well as raising the awareness of regulators, policymakers and the public about the impact of these pollutants, which pose a human health risk.