Toxicity of ZnO nanoparticles (NPs) to A549 cells and A549 epithelium in vitro: Interactions with dipalmitoyl phosphatidylcholine (DPPC)

A green approach coupled with molecular dynamics simulations and toxicity assays to infer the mode of action for organophosphate esters

Organophosphate esters (OPEs) have attracted extensive attention due to their toxic effects on human health and biological systems as plasticizers and flame retardants. This study focused on exploring a green approach to get toxicity mechanisms that used less solvents or organisms. The toxicity values of selected organophosphate esters including tri (2-chloroethyl) phosphate (TCEP), tri (1, 3-dichloro-2-propyl) phosphate (TDCP), tripropyl phosphate (TPrP), tri-n-butyl phosphate (TnBP), and tritolyl Phosphate (TCrP) to Photobacterium phosphoreum were determined. Their EC50 range was between 7.27 × 10-8-5.12 × 10-6 mol/L. Based on molecular dynamics simulation the data of binding affinity between OPEs and n-octanol / phospholipid bilayer were calculated respectively. Coupling with binding affinity energies and toxicity values, the mode of action (MOA) of OPEs including types of reactive or anesthetic mechanism could be fast deduced. The proposed hypothesis of n-octanol (C8H18O) as a virtual biofilm to replace phospholipid bilayer was verified. The alternative green approach could simplify toxicity assay and realize fast predicting MOA for different chemicals and model organisms.

Influences of TiO2 nanoparticle and fipronil co-exposure on metabolite profiles in mouse intestines

Food contaminates, such as insecticide, may influence the toxicity of nanoparticles (NPs) to intestine. The present study investigated the combined toxicity of TiO2 NPs and fipronil to male mouse intestine. Juvenile mice (8 weeks) were orally exposed to 5.74 mg/kg TiO2 NPs, 2.5 mg/kg fipronil, or both, once a day, for 5 days. We found that both TiO2 NPs and fipronil induced some pathological changes in intestines, accompanying with defective autophagy, but these effects were not obviously enhanced after TiO2 NP and fipronil co-exposure. Fipronil promoted Ti accumulation but induced minimal impact on other trace elements in TiO2 NP-exposed intestines. Metabolomics data revealed that the exposure altered metabolite profiles in mouse intestines, and two KEGG pathways, namely, ascorbate and aldarate metabolism (mmu00053) and glutathione metabolism (mmu00480), were only statistically significantly changed after TiO2 NP and fipronil co-exposure. Five metabolites, including 2-deoxy-D-erythro-pentofuranose 5-phosphate, 5alpha-cholestanol, beta-D-glucopyranuronic acid, elaidic acid, and isopentadecanoic acid, and maltotriose, were more significantly up-regulated after the co-exposure, whereas trisaccharide and xylonolactone were only significantly down-regulated by the co-exposure. We concluded that fipronil had minimal impact to enhance the toxicity of TiO2 NPs to mouse intestines but altered metabolite profiles.

Combined effects of TiO2 nanoparticle and fipronil co-exposure on microbiota in mouse intestine

Oral exposure to nanoparticles (NPs) may affect intestinal microbiota, and this effect may be further changed by co-contaminates. In the present study, we investigated the combined effects of TiO2 NPs and fipronil (FPN) on microbiota in mouse intestines. Mice were intragastric exposed to 5.74 mg/kg TiO2 NPs, 2.5 mg/kg FPN, or both of them, once a day, for 30 days. The results showed that individual exposure to TiO2 NPs or FPN decreased body weight and induced pathological changes in intestines. The exposure was also associated with increased cleaved caspase-3 protein, oxidative stress and decreased tight junction protein expression. Furthermore, the levels of diamine oxidase (DAO), lipopolysaccharide (LPS) and inflammatory cytokines in serum were also elevated, indicating increased intestinal barrier permeability. As expected, both TiO2 NPs and FPN decreased the diversity and altered the composition of microbiota. However, the observed effects were not further enhanced after the co-exposure to TiO2 NPs and FPN, except that Romboutsia was only significantly increased after the co-exposure to TiO2 NPs + FPN. We concluded that oral exposure to TiO2 NPs and FPN showed minimal synergistic effects on microbiota in mouse intestine.

Differentially Induced Autophagy by Engineered Nanomaterial Treatment Has an Impact on Cellular Homeostasis and Cytotoxicity

Considering the increasing production of engineered nanomaterials (ENMs), new approach methodologies (NAMs) are essential for safe-by-design approaches and risk assessment. Our aim was to enhance screening strategies with a focus on reactivity-triggered toxicities. We applied in vitro tests to 10 selected benchmark ENMs in two cell models, lung epithelial A549 and differentiated THP-1 macrophage-like cells. Previously, we categorized ENMs based on surface reactivity. Here we elucidated their reactivity-triggered cytotoxicity and mode of action using the WST-1 assay (metabolic activity), LDH assay (cell membrane integrity), autophagosome detection, and proteomics. Nonreactive SiO2 NM-200 showed no significant impact on cell viability. Conversely, highly reactive CuO and ZnO (NM-110 and NM-111) disrupted cell homeostasis. Interestingly, moderately reactive TiO2 (NM-101 and NM-105) and CeO2 (NM-211 and NM-212), apparently without an adverse effect, induced autophagosome formation, evidencing autophagy as a defensive mechanism. Our improved in vitro testing strategy, combined with state-of-the-art reactivity information, screens ENMs for potential reactivity-triggered toxicity.

Activity of zinc oxide and zinc borate nanoparticles against resistant bacteria in an experimental lung cancer model

BACKGROUND

Recent research indicates a prevalence of typical lung infections, such as pneumonia, in lung cancer patients. Klebsiella pneumoniae, Pseudomonas aeruginosa, and Acinetobacter baumannii stand out as antibiotic-resistant pathogens. Given this, there is a growing interest in alternative therapeutic avenues. Boron and zinc derivatives exhibit antimicrobial, antiviral, and antifungal properties.

OBJECTIVES

This research aimed to establish the effectiveness of ZnO and ZB NPs in combating bacterial infections in lung cancer cell lines.

METHODS

Initially, this study determined the minimal inhibitory concentration (MIC) and fractional inhibitory concentration (FIC) of zinc oxide nanoparticles (ZnO NPs) and zinc borate (ZB) on chosen benchmark strains. Subsequent steps involved gauging treatment success through a lung cancer-bacteria combined culture and immunohistochemical analysis.

RESULTS

The inhibitory impact of ZnO NPs on bacteria was charted as follows: 0.97 µg/mL for K. pneumoniae 700603, 1.95 µg/mL for P. aeruginosa 27853, and 7.81 µg/mL for Acinetobacter baumannii 19,606. In comparison, the antibacterial influence of zinc borate was measured as 7.81 µg/mL for Klebsiella pneumoniae 700603 and 500 µg/mL for both P. aeruginosa 27853 and A.baumannii 19606. After 24 h, the cytotoxicity of ZnO NPs and ZB was analyzed using the MTT technique. The lowest cell viability was marked in the 500 µg/mL ZB NPs group, with a viability rate of 48.83% (P < 0.001). However, marked deviations appeared at ZB concentrations of 61.5 µg/mL (P < 0.05) and ZnO NPs at 125 µg/mL.

CONCLUSION

A synergistic microbial inhibitory effect was observed when ZnO NP and ZB were combined against the bacteria under investigation.

Cytotoxicity prediction of nano metal oxides on different lung cells via Nano-QSAR

In recent years, nanomaterials have found extensive applications across diverse domains owing to their distinctive physical and chemical characteristics. It is of great importance in theoretical and practical terms to carry out the relationship between structural characteristics of nanomaterials and different cytotoxicity and to achieve practical assessment and prediction of cytotoxicity. This study investigated the intrinsic quantitative constitutive relationships between the cytotoxicity of nano-metal oxides on human normal lung epithelial cells and human lung adenocarcinoma cells. We first employed quasi-SMILES-based nanostructural descriptors by selecting the five physicochemical properties that are most closely related to the cytotoxicity of nanometal oxides, then established SMILES-based descriptors that can effectively describe and characterize the molecular structure of nanometal oxides, and then built the corresponding Nano-Quantitative Structure-Activity Relationship (Nano-QSAR) prediction models, finally, combined with the theory of reactive oxygen species (ROS) biotoxicity, to reveal the mechanism of toxicity and differences between the two cell types. The established model can efficiently and accurately predict the properties of targets, reveal the corresponding toxicity mechanisms, and guide the safe design, synthesis, and application of nanometal oxides.

Mapping the evolution of inhaled drug delivery research: Trends, collaborations, and emerging frontiers

Inhaled drug delivery is a unique administration route known for its ability to directly target pulmonary or brain regions, facilitating rapid onset and circumventing the hepatic first-pass effect. To characterize current global trends and provide a visual overview of the latest trends in inhaled drug delivery research, bibliometric analysis of data acquired from the Web of Science Core Collection database was performed via VOSviewer and CiteSpace. Inhaled drug delivery can not only be utilized in respiratory diseases but also has potential in other types of diseases for both fundamental and clinical applications. Overall, we provide an overview of present trends, collaborations, and newly discovered frontiers of inhaled drug delivery.

Thermal and biological properties of novel sodium carboxymethylcellulose-PPFMA nanocomposites containing biosynthesized Ag-ZnO hybrid filler

The aim of this study was to produce new nanocomposites with antimicrobial, antioxidant and anticancer properties that can be used in biomedical research based on carboxymethyl cellulose (NaCMC) biopolymer. First, poly(2-oxo-2-(pentafluorophenoxy)ethyl-2-methylprop-2-enoate) (PPFMA) was synthesized and characterized by FTIR and NMR techniques. It was then blended with NaCMC by in situ/hydrothermal method to produce a semi-synthetic functional material. Changes in the FTIR data of the blend and the single Tg value from DSC confirmed the compatibility of the blend. To enhance the thermal and biological properties of the NaCMC-PPFMA blend, biosynthesized Ag-ZnONPs were hydrothermally incorporated into the blend at different weight ratios. The prepared materials were characterized by SEM, EDX, TEM, XRD and FTIR. The thermal stability of the materials was determined by thermogravimetric analysis (TGA), and glass transition temperatures (Tg) was determined by differential scanning calorimeter (DSC). The oxidant, antioxidant, antimicrobial, and cytotoxic properties of PPFMA, Ag-ZnONPs, PPFMA-NaCMC blend, and nanocomposites were investigated in detail. The total oxidant state (TOS) value of the NaCMC-PPFMA blend, which was 0.72 μmol equivalent H2O2/L, increased to 7.2-10.4 μmol equivalent H2O2/L with the addition of Ag-ZnONPs. Ag-ZnONPs decreased total antioxidant state (TAS) levels of the nanocomposites while increasing their oxidant activity. Therefore, an increase in the antimicrobial activity of the nanocomposites was observed. Adding Ag-ZnONPs to the NaCMC-PPFMA blend increased the thermal stability by 22 °C and the Tg value by 9 °C. Finally, the potential of Ag-ZnONPs containing nanocomposites in wound healing therapies was examined. The findings suggest that nanocomposites prepared by incorporating Ag-ZnONPs into the semi-synthetic NaCMC-PPFMA blend can be a source of bio-safe raw materials and can be used as potential wound healers.

Preparation of nanocomposite based on chitosan-PDCOEMA containing biosynthesized ZnO: Biological and thermal characterization

In this study, poly(2-(3,5-dichloroanilino)-2-oxoethyl 2-methylprop-2-enoate) (PDCOEMA), a new synthetic polymer based on methacrylate, was synthesized and characterized. The blend of PDCOEMA with chitosan (CS) was prepared by the hydrothermal method and the DSC technique confirmed its formation. It was observed that PDCOEMA increased the thermal stability and glass transition temperature (Tg) of CS. The Tg value of the PDCOEMA-CS blend was increased at about 7 °C with the highest ZnO NPs contribution rate. PDCOEMA-CS/ZnO nanocomposites were prepared by adding ZnO NPs produced by biosynthesis at different weight ratios to the PDCOEMA-CS blend by hydrothermal method. When the thermal stability of nanocomposites determined by TGA was examined, it was observed that it increased significantly compared to CS. While the initial decomposition temperature of CS was 270 °C, this value increased to 293 °C after blending with DCOEMA, and to 317 °C with the addition of 7 % ZnO NPs. Antimicrobial, anticancer, cytotoxic, antioxidant, and wound healing properties of PDCOEMA, CS, PDCOEMA-CS blend, and nanocomposites were determined. According to the obtained results, it was observed that nanocomposites containing 5 % and 7 % ZnO NPs showed good anticancer activity against A549 cells at a dose of 10 μg/mL. The results show that the produced nanocomposites can contribute to developing CS-based materials.

Influences of repeated exposure to low levels of TiO2 nanoparticles on Kruppel-like factors in 3D Caco-2 spheroids and mouse intestines

Kruppel-like factors (KLFs) are a set of transcription factors (TFs) involved in the regulation of many basic biological processes, and recent studies suggested that nanoparticles (NPs) were capable to change KLFs in different models even at non-cytotoxic concentrations. In this study, we repeatedly exposed 3D Caco-2 spheroids and mice to TiO2 NPs, one of the most frequently used metal oxide NPs, and investigated the changes of KLF-signaling pathways based on RNA-sequencing. Although the internalization of TiO2 NPs did not induce cytotoxicity in vitro, repeated exposure (three times within 7 days) to 15.7 ng/ml TiO2 NPs increased KLF4 but decreased KLF6. Consistently, KLF4/KLF6-regulated gene ontology terms were altered, including those involved in the regulation of gene expression. We further verified that repeated exposure to 15.7 ng/ml TiO2 NPs increased the expression of KLF4 and proto-oncogene, bHLH transcription factor (MYC), but decreased the expression of KLF6 and activating transcription factor 3 (ATF3). But with the increase of NP concentrations, the expression of these genes was decreased. In mice following intragastrical exposure to 4.39 and 43.9 mg/kg TiO2 NPs (once a day for 5 continuous days), we observed increased expression of klf4, klf6, myc, and atf3, along with morphological changes of intestines. We concluded that repeated exposure to low levels of TiO2 NPs altered KLF-signaling pathways in intestinal cells both in vitro and in vivo.

Activation of KLF6 by titanate nanofibers and regulatory roles of KLF6 on ATF3 in the endothelial monolayer and mouse aortas

Although titanium (Ti)-based nanomaterials (NMs) were traditionally considered as biologically inert materials, it was recently reported that Ti-based NMs induce adverse vascular effects by inhibiting Kruppel-like factor 2 (KLF2) and/or KLF4, vasoprotective KLFs with well-documented regulatory activity in NO signaling. However, the potential roles of other KLFs are not clear. KLF6 was recently identified as an important KLF involved in regulating endothelial dysfunction, inflammation, and angiogenesis, therefore, this study investigated the influence of titanate nanofibers (TiNFs) on KLF6-mediated events. Ingenuity pathway analysis (IPA) showed that TiNFs altered the expression of a panel of KLF6-related genes: KLF6-mediated gene ontology (GO) terms were altered, categories including cytokine-mediated signaling pathways, transcription factor (TF) functions and membrane-bound organelles. Additionally, RT-PCR confirmed that TiNFs increased KLF6 activating transcription factor 3 (ATF3), a TF involved in endoplasmic reticulum (ER) stress, and ELISA confirmed the increase of soluble monocyte chemotactic protein 1 (sMCP-1), a KLF6-related inflammatory cytokine. Interestingly, the activation of klf6, atf3 and C-C motif chemokine ligand 2 (ccl2; mcp-1 encoding gene) was observed in aortas of mice following one-time intravenous injection but not intratracheal instillation of TiNFs (100 μg per mouse), indicating a need for direct contact with NMs to activate klf6-mediated pathways in vivo. In endothelial cells, KLF6 knockdown inhibited the expression of ATF3 but not CCL2, suggesting the regulatory role of KLF6 in ATF3 expression. Overall, this study uncovered a previously unknown role of KLF6 in TiNF-induced vascular effects both in vitro and in vivo.

The cytotoxicity of zinc oxide nanoparticles to 3D brain organoids results from excessive intracellular zinc ions and defective autophagy

Although the neurotoxicity of ZnO nanoparticles (NPs) has been evaluated in animal and nerve cell culture models, these models cannot accurately mimic human brains. Three-dimensional (3D) brain organoids based on human-induced pluripotent stem cells have been developed to study the human brains, but this model has rarely been used to evaluate NP neurotoxicity. We used 3D brain organoids that express cortical layer proteins to investigate the mechanisms of ZnO NP-induced neurotoxicity. Cytotoxicity caused by high levels of ZnO NPs (64 μg/mL) correlated with high intracellular Zn ion levels but not superoxide levels. Exposure to a non-cytotoxic concentration of ZnO NPs (16 μg/mL) increased the autophagy-marker proteins LC3B-II/I but decreased p62 accumulation, whereas a cytotoxic concentration of ZnO NPs (64 μg/mL) decreased LC3B-II/I proteins but did not affect p62 accumulation. Fluorescence micro-optical sectioning tomography revealed that 64 μg/mL ZnO NPs led to decreases in LC3B proteins that were more obvious at the outer layers of the organoids, which were directly exposed to the ZnO NPs. In addition to reducing LC3B proteins in the outer layers, ZnO NPs increased the number of micronuclei in the outer layers but not the inner layers (where LC3B proteins were still expressed). Adding the autophagy flux inhibitor bafilomycin A1 to ZnO NPs increased cytotoxicity and intracellular Zn ion levels, but adding the autophagy inducer rapamycin only slightly decreased cellular Zn ion levels. We conclude that high concentrations of ZnO NPs are cytotoxic to 3D brain organoids via defective autophagy and intracellular accumulation of Zn ions.

Cytotoxic effects of crystalline silica in form of micro and nanoparticles on the human lung cell line A549

Airborne crystalline silica (SiO₂) particles are one of the most common pollutants in stone industries. Limited studies have investigated the health effects of crystalline SiO₂ nanoparticles. Hence, the objective of this study was to study the cytotoxicity of SiO₂ in nano and micron sizes. A mineral quartz sample in the range of 0.2-0.8 mm sizes was purchased. These particles were ground at about 5 and 0.1 microns. Human cell line A549 was exposed to micro and nanometer particles at concentrations of 10, 50, 100, and 250 μg/ml for 24 and 72 h. Subsequently, the cytotoxicity of exposed cells was investigated by measuring cell survival, ROS generation, mitochondrial permeability, and intracellular glutathione content. The results showed that crystalline SiO₂ nano and microparticles decreased cell survival, increased ROS generation, damaged the mitochondrial membrane, and lowered the antioxidant content of these cells in a concentration- and time-dependent manner. The toxicity of crystalline SiO₂ microparticles at concentrations ≤50 μg/mL was greater than for nanoparticles, which was the opposite at concentrations ≥100 μg/mL. Exposure time and concentration were crucial factors for the cytotoxicity of exposed A549 cells to crystalline SiO₂ particles, which can affect the severity of the effect of particle size. Due to the limitation of exposure concentration and test durations in this study, further studies on the parameters of nanoparticle toxicity and underlying mechanisms could advance our knowledge.

ZnO Nanoparticles from Different Precursors and Their Photocatalytic Potential for Biomedical Use

Semiconductor photocatalysts, particularly ZnO nanoparticles, were synthesized via the precipitation method using four different precursors (zinc acetate/zinc nitrate/zinc sulfate/zinc chloride) and compared, according to their optical, structural, photocatalytic, and anticancer properties. The materials were characterized via X-ray Diffraction method (XRD), micro-Raman, Fourier Transform Infrared Spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), Dynamic Light Scattering (DLS), and Field Emission Scanning Electron Microscope (FESEM) analysis. Photocatalysis was conducted under UV and visible light irradiation, using Rhodamine B as the organic pollutant. It was observed that the highest photocatalysis efficiency was obtained by the nanoparticles synthesized from the zinc acetate used as precursor material. A cell-dependent anticancer efficiency of the tested ZnO nanoparticles was also observed, that was also attributed to the different precursors and the synthesis method, revealing that the nanoparticles that were synthesized from zinc acetate were more bioactive among the four tested precursors. Overall, the data revealed that both the enhanced photocatalytic and biological activity of ZnO nanoparticles derived from zinc acetate precursor could be attributed to the reduced crystalline size, increased surface area, as well as the observed hexagonal crystalline morphology.

Biosynthesis of ZnONP Using Chamaecostus cuspidatus and Their Evolution of Anticancer Property in MCF-7 and A549 Cell Lines

The ZnO nanoparticle synthesis using the leaf part of Chamaecostus cuspidatus was characterized using UV-Vis spectrophotometry, IR, XRD, DLS, FESEM, EDX, TEM, AFM and XPS. The MTT assay was used to examine the cytotoxicity activity against lung epithelial and breast cell lines, and the IC₅₀ value was determined. The presence of ZnO nanoparticles, which range in size from 200 to 800 nm, was confirmed by the absorption peak at 350 nm. The median particle size was 145.1 nm, and the ζ -the potential was -19.45 mV, showing that ZnONP is stable. Zinc, carbon, and oxygen contribute to the elemental composition of ZnONP, as determined by EDX analysis. MTT assay was used to investigate in vitro cytotoxicity in MCF-7 and A549 cell lines. The cytotoxicity activity IC₅₀ value was determined to be 30 μg/mL for the A549 cell line and 37 μg/mL for the MCF-7 cell line.

Graphene oxide links alterations of anti-viral signaling pathways with lipid metabolism via suppressing TLR3 in vascular smooth muscle cells

Vascular smooth muscle cells (VSMCs), the main cells constructing blood vessels, are important in the regulation of the pathophysiology of vascular systems; however, relatively few studies have investigated the influence of nanomaterials (NMs) on VSMCs. In this study, we found that the interaction between graphene oxide and human VSMCs led to the cytotoxicity and morphological changes of cells. Because transcriptomic data suggested that graphene oxide decreased anti-viral signaling pathways via decreasing Toll-like receptor 3 (TLR3), we further verified that graphene oxide decreased interferon induced protein with tetratricopeptide repeats 1 (IFIT1) and the radical S-adenosyl methionine domain containing 2 (RSAD2), and TLR3-downstream genes involved in anti-viral responses. Due to the involvement of RSAD2 in lipid dysfunction, we also verified that graphene oxide disrupted lipid homeostasis and increased adipose triglyceride lipase (ATGL). Adding TLR3 agonist polyinosinic:polycytidylic acid (Poly IC) partially increased TLR3-downstream protein interleukin-8 (IL-8) and some lipid classes, particularly lysophosphatidylcholine (LPC) and lysophosphatidylethanolamine (LPE), in graphene oxide-exposed VSMCs. In mice receiving repeated intravenous injection of graphene oxide, significantly decreased TLR3, IFIT1 and RSAD2 but increased ATGL proteins were observed in aortas. We conclude that graphene oxide altered anti-viral signaling pathways and lipid metabolism via decreasing TLR3 in VSMCs.

Current Research on Zinc Oxide Nanoparticles: Synthesis, Characterization, and Biomedical Applications

Zinc oxide nanoparticles (ZnO-NPs) have piqued the curiosity of researchers all over the world due to their extensive biological activity. They are less toxic and biodegradable with the capacity to greatly boost pharmacophore bioactivity. ZnO-NPs are the most extensively used metal oxide nanoparticles in electronic and optoelectronics because of their distinctive optical and chemical properties which can be readily modified by altering the morphology and the wide bandgap. The biosynthesis of nanoparticles using extracts of therapeutic plants, fungi, bacteria, algae, etc., improves their stability and biocompatibility in many biological settings, and its biofabrication alters its physiochemical behavior, contributing to biological potency. As such, ZnO-NPs can be used as an effective nanocarrier for conventional drugs due to their cost-effectiveness and benefits of being biodegradable and biocompatible. This article covers a comprehensive review of different synthesis approaches of ZnO-NPs including physical, chemical, biochemical, and green synthesis techniques, and also emphasizes their biopotency through antibacterial, antifungal, anticancer, anti-inflammatory, antidiabetic, antioxidant, antiviral, wound healing, and cardioprotective activity. Green synthesis from plants, bacteria, and fungus is given special attention, with a particular emphasis on extraction techniques, precursors used for the synthesis and reaction conditions, characterization techniques, and surface morphology of the particles.

Meta-analysis of in-vitro cytotoxicity evaluation studies of zinc oxide nanoparticles: Paving way for safer innovations

Nano-based products have shown their daunting presence in several sectors. Among them, Zinc Oxide (ZnO) nanoparticles wangled the reputation of providing "next-generation solutions" and are being utilized in plethora of products. Their widespread application has led to increased exposure of these particles, raising concerns regarding toxicological repercussions to the human health and environment. The diversity, complexity, and heterogeneity in the available literature, along with correlation of befitting attributes, makes it challenging to develop one systematic framework to predict this toxicity. The present study aims at developing predictive modelling framework to tap the prospective features responsible for causing cytotoxicity in-vitro on exposure to ZnO nanoparticles. Rigorous approach was used to mine the information from complete body of evidence published to date. The attributes, features and experimental conditions were systematically extracted to unmask the effect of varied features. 1240 data points from 76 publications were obtained, containing 14 qualitative and quantitative attributes, including physiochemical properties of nanoparticles, cell culture and experimental parameters to perform meta-analysis. For the first time, the efforts were made to investigate the degree of significance of attributes accountable for causing cytotoxicity on exposure to ZnO nanoparticles. We show that in-vitro cytotoxicity is closely related with dose concentration of nanoparticles, followed by exposure time, disease state of the cell line and size of these nanoparticles among other attributes.

Rapid and efficient testing of the toxicity of graphene-related materials in primary human lung cells

Graphene and its derivative materials are manufactured by numerous companies and research laboratories, during which processes they can come into contact with their handlers' physiological barriers—for instance, their respiratory system. Despite their potential toxicity, these materials have even been used in face masks to prevent COVID-19 transmission. The increasingly widespread use of these materials requires the design and implementation of appropriate, versatile, and accurate toxicological screening methods to guarantee their safety. Murine models are adequate, though limited when exploring different doses and lengths of exposure—as this increases the number of animals required, contrary to the Three R's principle in animal experimentation. This article proposes an in vitro model using primary, non-transformed normal human bronchial epithelial (NHBE) cells as an alternative to the most widely used model to date, the human lung tumor cell line A549. The model has been tested with three graphene derivatives—graphene oxide (GO), few-layer graphene (FLG), and small FLG (sFLG). We observed a cytotoxic effect (necrosis and apoptosis) at early (6- and 24-h) exposures, which intensified after seven days of contact between cells and the graphene-related materials (GRMs)—with cell death reaching 90% after a 5 µg/mL dose. A549 cells are more resistant to necrosis and apoptosis, yielding values less than half of NHBE cells at low concentrations of GRMs (between 0.05 and 5 µg/mL). Indeed, GRM-induced cell death in NHBE cells is comparable to that induced by toxic compounds such as diesel exhaust particles on the same cell line. We propose NHBE as a suitable model to test GRM-induced toxicity, allowing refinement of the dose concentrations and exposure timings for better-designed in vivo mouse assays.

Physicochemical properties of nanoparticles affecting their fate and the physiological function of pulmonary surfactants

Pulmonary drug delivery has drawn great attention due to its targeted local lung action, reduced side effects, and ease of administration. However, inhaled nanoparticles (NPs) could adsorb different pulmonary surfactants depending on their physicochemical properties, which may impair the physiological function of the pulmonary surfactants or alter the fate of the NPs. Thus, the objective of this review is to summarize how the physicochemical properties of NPs affecting the physiological function of pulmonary surfactants and their fate. First of all, the composition and characteristics of pulmonary surfactants, methods for studying pulmonary surfactant interaction with NPs are introduced. Thereafter, the influence of physicochemical properties of NPs on hydrophobic protein adsorption and strategies to decrease the interaction of NPs with pulmonary surfactants are discussed. Finally, the influence of physicochemical properties of NPs on lipids and hydrophilic protein adsorption and consequently their fate is described. In conclusion, a better understanding of the interaction of NPs with pulmonary surfactants will promote the faster development of safe and effective nanomedicine for pulmonary drug delivery. STATEMENT OF SIGNIFICANCE: Drug delivery carriers often face complex body fluid components after entering the human body. Pulmonary surfactants diffuse at the lung gas-liquid interface, and particles inevitably interact with pulmonary surfactants after pulmonary nanomedicine delivery. This review presents an overview of how the physicochemical properties of nanoparticles affecting their fate and physiological function of pulmonary surfactants. We believe that the information included in this review can provide important guiding for the development of safe and effective pulmonary delivery nanocarriers.

Polyhexamethylene guanidine aerosol triggers pulmonary fibrosis concomitant with elevated surface tension via inhibiting pulmonary surfactant

Environmental chemicals inhalation exposure could induce pulmonary fibrosis, which is characterized by the excessive proliferation of fibroblasts and accumulation of extracellular matrix components, in which surface tension usually plays vital roles. Polyhexamethylene guanidine (PHMG) was first recognized as a potential hazard ingredient in humidifier disinfectants, which caused an outbreak of pulmonary fibrosis in South Korea. However, the underlying mechanisms involved in PHMG-induced pulmonary fibrosis have not yet been fully elucidated. Therefore, this study mainly focuses on the effect of PHMG on surface tension to unveil the influence and involved mechanisms in PHMG-induced pulmonary fibrosis. C57BL/6J mice were exposed to sub-acute PHMG aerosol for 8 weeks. The results indicated that PHMG induced pulmonary fibrosis combined with elevated surface tension. Results from in vitro study further confirmed PHMG elevated surface tension by inhibited pulmonary surfactant. Mechanistically, PHMG suppressed the key surfactant protein SP-B and SP-C by inhibiting protein expression and block their active sites. The present study, for the first time, revealed the molecular mechanism of PHMG-induced pulmonary fibrosis based on pulmonary surfactant inhibition mediated surface tension elevated. And pulmonary surfactant may be a potential target for further intervention to prevent PHMG-induced fibrosis or alleviate the symptom of relevant patients.

Exposure to nanoparticles derived from diesel particulate filter equipped engine increases vulnerability to arrhythmia in rat hearts

Air pollution is well recognized as a central player in cardiovascular disease. Exhaust particulate from diesel engines (DEP) is rich in nanoparticles and may contribute to the health effects of particulate matter in the environment. Moreover, diesel soot emitted by modern engines denotes defective surfaces alongside chemically-reactive sites increasing soot cytotoxicity. We recently demonstrated that engineered nanoparticles can cross the air/blood barrier and are capable to reach the heart. We hypothesize that DEP nanoparticles are pro-arrhythmogenic by direct interaction with cardiac cells. We evaluated the internalization kinetics and the effects of DEP, collected from Euro III (DEPe3, in the absence of Diesel Particulate Filter, DPF) and Euro IV (DEPe4, in the presence of DPF) engines, on alveolar and cardiac cell lines and on in situ rat hearts following DEP tracheal instillation. We observed significant differences in DEP size, metal and organic compositions derived from both engines. DEPe4 comprised ultrafine particles (<100 nm) and denoted a more pronounced toxicological outcome compared to DEPe3. In cardiomyocytes, particle internalization is fastened for DEPe4 compared to DEPe3. The in-vivo epicardial recording shows significant alteration of EGs parameters in both groups. However, the DEPe4-instilled group showed, compared to DEPe3, a significant increment of the effective refractory period, cardiac conduction velocity, and likelihood of arrhythmic events, with a significant increment of membrane lipid peroxidation but no increment in inflammation biomarkers. Our data suggest that DEPe4, possibly due to ultrafine nanoparticles, is rapidly internalized by cardiomyocytes resulting in an acute susceptibility to cardiac electrical disorder and arrhythmias that could accrue from cellular toxicity. Since the postulated transfer of nanoparticles from the lung to myocardial cells has not been investigated it remains open whether the effects on the cardiovascular function are the result of lung inflammatory reactions or due to particles that have reached the heart.

Inflammatory response in human alveolar epithelial cells after TiO2 NPs or ZnO NPs exposure: Inhibition of surfactant protein A expression as an indicator for loss of lung function

The increasing use of metal oxide nanoparticles (MONPs) as TiO₂ NPs or ZnO NPs has led to environmental release and human exposure. The respiratory system, effects on lamellar bodies and surfactant protein A (SP-A) of pneumocytes, can be importantly affected. Exposure of human alveolar epithelial cells (A549) induced differential responses; a higher persistence of TiO₂ in cell surface and uptake (measured by Atomic Force Microscopy) and sustained inflammatory response (by means of TNF-α, IL-10, and IL-6 release) and ROS generation were observed, whereas ZnO showed a modest response and low numbers in cell surface. A reduction in SP-A levels at 24 h of exposure to TiO₂ NPs (concentration-dependent) or ZnO NPs (the higher concentration) was also observed, reversed by blocking the inflammatory response (by the inhibition of IL-6). Loss of SP-A represents a relevant target of MONPs-induced inflammatory response that could contribute to cellular damage and loss of lung function.

Modeling better in vitro models for the prediction of nanoparticle toxicity: a review

Exposure to nanoparticles (NPs) is plausible in real life due to ambient particulate exposure or development of nanotechnologies, hence the evaluation of NP toxicity as well as mechanism-based studies are necessary. The in vitro models allow rapid testing of NP toxicity, but it is required that the developed in vitro models are reliable to reflect the toxicity of NPs. In this review, we discussed the principles to model better in vitro models to predict the toxicity of NPs based on our own experiences and works of literature. We suggested that in vitro nanotoxicological studies should consider (1) using normal cells because the commonly used cancer cell lines might not reflect the toxicity of NPs to normal tissues; (2) the possible influence of biological molecules to reflect the toxicity of NPs in a biological microenvironment; (3) the influence of pathophysiological conditions to mimic the responses of NPs under different in vivo conditions; and (4) developing advanced tissue-based models to reflect the responses of tissues/organs to NPs. It is our hope that this review may provide useful information for the future design of in vitro nanotoxicological studies.

Anthocyanins decrease the internalization of TiO2 nanoparticles into 3D Caco-2 spheroids

The influence of food components on nanoparticle (NP) internalization indicates a need to investigate the behaviors of NPs in a complex system. This study measured the changes of TiO2 NP colloidal stability and quenching of anthocyanin fluorescence to indicate NP-anthocyanin interactions, and cytotoxicity, oxidative stress, expression of ABC transporters and intracellular Ti concentrations in 3D Caco-2 spheroids co-exposed to NPs and anthocyanins to indicate the influence of anthocyanins on NP bio-effects. The anthocyanins were observed to have minimal impacts on colloidal properties of TiO2 NPs. Meanwhile, NP-anthocyanin co-exposure did not induce cytotoxicity or oxidative stress. The fluorescence quenching study indicated the binding of anthocyanins onto TiO2 NPs, and the binding affinity was inversely correlated with NP internalization into 3D Caco-2 spheroids. This may be partially related with the up-regulation of ABC transporters. Our results may provide novel insights into understanding the interactions of NPs and anthocyanins with human intestinal cells.

Quartz crystal microbalances (QCM) are suitable for real-time dosimetry in nanotoxicological studies using VITROCELL®Cloud cell exposure systems

Background

Accurate knowledge of cell−/tissue-delivered dose plays a pivotal role in inhalation toxicology studies, since it is the key parameter for hazard assessment and translation of in vitro to in vivo dose-response. Traditionally, (nano-)particle toxicological studies with in vivo and in vitro models of the lung rely on in silio computational or off-line analytical methods for dosimetry. In contrast to traditional in vitro testing under submerged cell culture conditions, the more physiologic air-liquid interface (ALI) conditions offer the possibility for real-time dosimetry using quartz crystal microbalances (QCMs). However, it is unclear, if QCMs are sensitive enough for nanotoxicological studies. We investigated this issue for two commercially available VITROCELL®Cloud ALI exposure systems.

Results

Quantitative fluorescence spectroscopy of fluorescein-spiked saline aerosol was used to determine detection limit, precision and accuracy of the QCMs implemented in a VITROCELL®Cloud 6 and Cloud 12 system for dose-controlled ALI aerosol-cell exposure experiments. Both QCMs performed linearly over the entire investigated dose range (200 to 12,000 ng/cm²) with an accuracy of 3.4% (Cloud 6) and 3.8% (Cloud 12). Their precision (repeatability) decreased from 2.5% for large doses (> 9500 ng/cm²) to values of 10% and even 25% for doses of 1000 ng/cm² and 200 ng/cm², respectively. Their lower detection limit was 170 ng/cm² and 169 ng/cm² for the Cloud 6 and Cloud 12, respectively. Dose-response measurements with (NM110) ZnO nanoparticles revealed an onset dose of 3.3 μg/cm² (or 0.39 cm²/cm²) for both cell viability (WST-1) and cytotoxicity (LDH) of A549 lung epithelial cells.

Conclusions

The QCMs of the Cloud 6 and Cloud 12 systems show similar performance and are highly sensitive, accurate devices for (quasi-) real-time dosimetry of the cell-delivered particle dose in ALI cell exposure experiments, if operated according to manufacturer specifications. Comparison with in vitro onset doses from this and previously published ALI studies revealed that the detection limit of 170 ng/cm² is sufficient for determination of toxicological onset doses for all particle types with low (e.g. polystyrene) or high mass-specific toxicity (e.g. ZnO and Ag) investigated here. Hence, in principle QCMs are suitable for in vitro nanotoxciological studies, but this should be investigated for each QCM and ALI exposure system under the specific exposure conditions as described in the present study.

Potential risks and benefits of zinc oxide nanoparticles: a systematic review

Zinc oxide nanoparticles are well-known metal oxide nanoparticles having numbers of applications in the field of cosmetology, medicine, and chemistry. However, the number of reports has indicated its toxicity also such as hepatotoxicity, pulmonary toxicity, neurotoxicity, and immunotoxicity. Thus, in this article, we have analyzed the potential risks and benefits of zinc oxide nanoparticles. The data related to risks and benefits of zinc oxide nanoparticles have been extracted from PubMed (from January 2007 to August 2019). A total of 3,892 studies have been published during this period regarding zinc oxide nanoparticles. On the basis of inclusion and exclusion criteria, 277 studies have been included for the analysis of risks and benefits. Emerging reports have indicated both risks and benefits of zinc oxide nanoparticles in concentration- and time-dependent manner under in vitro and in vivo conditions through different mechanism of action. In conclusion, zinc oxide nanoparticles could play a beneficial role in the treatment of various diseases but safety of these particles at particular effective concentration should be thoroughly evaluated.

Evaluation of in vitro toxicity of silica nanoparticles (NPs) to lung cells: Influence of cell types and pulmonary surfactant component DPPC

Cultured human lung epithelial cells, particularly A549 cells, are commonly used as the in vitro model to evaluate the inhalational toxicity of nanoparticles (NPs). However, A549 cells are cancer cells that might not reflect the response of normal tissues to NP exposure. In addition, the possible influence of pulmonary surfactant also should be considered. This study used silica NPs as model NPs, and evaluated the toxicity of silica NPs to both 16HBE human bronchial epithelial cells and A549 adenocarcinomic cells, with or without the presence of pulmonary surfactant component dipalmitoyl phosphatidylcholine (DPPC). We found that silica NPs induced cytotoxicity at the concentration of 128 μg/mL in 16HBE cells but not A5490 cells, and the cytotoxicity of silica NPs to 16HBE cells was inhibited by DPPC. Intracellular reactive oxygen species (ROS) was only induced in 16HBE cells, accompanying with decreased thiol levels. Moreover, 16HBE cells internalized more silica NPs compared with A549 cells, and the internalization was reduced with the presence of DPPC in both types of cells. The retention of ABC transporter substrate Calcein was only significantly induced by silica NPs at high concentrations in 16HBE cells, and was partially reduced due to the presence of DPPC. In addition, ABC transporter inhibitor MK571 increased the toxicity of silica NPs to both types of cells, with 16HBE cells being more sensitive. Our data revealed that the cell types and pulmonary surfactant components could influence the toxicological consequences of silica NPs to human lung cells. Therefore, it is recommended that in vitro studies should carefully select suitable models to evaluate the inhalational toxicity of NPs.

Influence of pristine and hydrophobic ZnO nanoparticles on cytotoxicity and endoplasmic reticulum (ER) stress-autophagy-apoptosis gene expression in A549-macrophage co-culture

Exposure to ZnO nanoparticles (NPs) might modulate endoplasmic reticulum (ER) stress-autophagy gene expression, but the possible influence of hydrophobic surface coating on these responses was less studied. This study used A549-macrophage co-culture as the in vitro model for lung barrier and investigated the toxicity of pristine and hydrophobic ZnO NPs. Pristine and hydrophobic NPs exhibited different Zeta potential and solubility in water, which suggested that hydrophobic surface coating might alter the colloidal aspects of ZnO NPs. However, pristine and hydrophobic ZnO NPs induced cytotoxicity and reduced the release of soluble monocyte chemotactic protein-1 (sMCP-1) in A549-macrophage co-culture to a similar extent. Exposure to pristine ZnO NPs significantly promoted the expression of ER stress-apoptosis genes, namely DDIT3, XBP-1s, CASP9, CASP12 and BAX (p < 0.05), but hydrophobic ZnO NPs only significantly promoted the expression of BAX (p < 0.05). Exposure to pristine ZnO NPs also significantly reduced the expression of autophagic gene BECN1 (p < 0.05) but not ATG7 (p > 0.05), whereas hydrophobic ZnO NPs significantly reduced the expression of ATG7 and BECN1 (p < 0.01). Moreover, the expression of XBP-1s, HSPA5, CASP9, CASP12, BAX and ATG7 in pristine ZnO NP-exposed co-culture was significantly lower than that in hydrophobic ZnO NP-exposed co-culture (p < 0.05). In conclusion, hydrophobic surface coating might influence the colloidal aspects of ZnO NPs and alter ER stress-apoptosis-autophagy gene expression pattern by pristine ZnO NPs in A549-macrophage co-culture.

Cytotoxicity, cytokine release and ER stress-autophagy gene expression in endothelial cells and alveolar-endothelial co-culture exposed to pristine and carboxylated multi-walled carbon nanotubes

Recently we found that direct exposure of human umbilical vein endothelial cells (HUVECs) to multi-walled carbon nanotubes (MWCNTs) might induce toxicological responses through the modulation of ER stress gene expression, but whether this signal could be transferred from other cells to endothelial cells (ECs) is unknown. This study investigated the toxicity of pristine and carboxylated MWCNTs to HUVECs and alveolar-endothelial co-culture, the later of which could mimic the possible signaling communications between ECs and MWCNT exposed alveolar cells. The results showed that direct contact with high levels of MWCNTs induced cytotoxicity and modulated expression of genes associated with ER stress (HSPA5, DDIT3 and XBP-1s) and autophagy (BECN1 and ATG12) both in A549-THP-1 macrophages cultured in the upper chambers as well as HUVECs. However, most of these responses were minimal or negligible in HUVECs cultured in the lower chambers. Moreover, significantly increased cytokine release (interleukin-6 and soluble vascular cell adhesion molecule-1) was only observed in MWCNT exposed HUVECs (p < 0.01) but not HUVECs cultured in the lower chambers (p > 0.05). The minimal or even absent response was likely due to relatively low translocation of MWCNTs from upper chambers to lower chambers, whereas A549-macrophages cultured in the upper chambers internalized large amount MWCNTs. The results indicated that ER stress-autophagy signaling might not be able to transfer from alveolar cells to endothelial cells unless sufficient MWCNTs are translocated.

Toxicity of ZnO nanoparticles (NPs) with or without hydrophobic surface coating to THP-1 macrophages: interactions with BSA or oleate-BSA

It is recently shown that biological macromolecules in food could interact with nanoparticles (NPs) and consequently change the biological effects of NPs. In this study, the interactions between ZnO NPs with or without hydrophobic surface coating and bovine serum albumin (BSA) or oleate (OA) complexed to BSA (OA-BSA) were assessed. Atomic force microscope (AFM) showed topographic changes of both types of NPs by BSA or OA-BSA, which could indicate the formation of protein corona. ZnO NPs showed negative Zeta potential, which was slightly decreased by BSA or OA-BSA, with OA-BSA being more effective. The UV-Vis was increased, whereas the fluorescence and synchronous fluorescence was decreased by the presence of ZnO NPs. Exposure to both types of ZnO NPs was associated with cytotoxicity to THP-1 macrophages, which was equally mitigated by BSA or OA-BSA associated with decreased cellular Zn elements. Exposure to ZnO NPs was associated with decreased release of cytokines, which was not affected by BSA or OA-BSA. In combination, the results from this study suggested that both BSA and OA-BSA could be adsorbed to ZnO NPs regardless of hydrophobic surface coating, which reduced the cytotoxicity of NPs to macrophages probably due to reduced association between NPs and cells. BSA and OA-BSA equally protected THP-1 macrophages from ZnO NP exposure, which might indicate that complexation to OA did not compromise the cytoprotective effects of BSA. These data might also indicate the complex interaction between NPs and biological macromolecules as food components, which should be considered for future nanotoxicological studies.

Cytotoxicity and ER stress-apoptosis gene expression in ZnO nanoparticle exposed THP-1 macrophages: influence of pre-incubation with BSA or palmitic acids complexed to BSA

In a biological microenvironment, biological macromolecules could interact with nanoparticles (NPs) and consequently influence the toxicity of NPs. This study investigated the effects of BSA or palmitic acids complexed to BSA (PA-BSA) on the toxicity of ZnO NPs to THP-1 macrophages. Atomic force microscopy showed the increase of NP heights after pre-incubation with BSA or PA-BSA, but PA-BSA more effectively altered the hydrodynamic size and zeta potential of NPs. Pre-incubation with BSA but not PA-BSA alleviated ZnO NP induced cytotoxicity, and transmission electron microscopy confirmed fewer intrastructural changes after exposure to ZnO NPs pre-incubated with BSA. ZnO NP exposure increased intracellular Zn ions but decreased reactive oxygen species (ROS) and release of soluble monocyte chemotactic protein-1 (sMCP-1), whereas pre-incubation with BSA and PA-BSA induced a different pattern of intracellular Zn ions and modestly increased intracellular ROS. The expression of ER stress marker DDIT3 was only significantly induced after exposure to NPs pre-incubated with PA-BSA, and CASP12 expression was significantly lower after exposure to NPs pre-incubated with BSA compared to NPs with or without pre-incubation of PA-BSA. In summary, these results showed that pre-incubation with BSA was more effective compared with PA-BSA to alleviate the toxicity of ZnO NPs to THP-1 macrophages, which should be considered for the evaluation of NP toxicity in a biological microenvironment.

Chemical Structures of Polyphenols That Critically Influence the Toxicity of ZnO Nanoparticles

Recent studies suggested that phytochemicals as natural antioxidants in food could alleviate nanoparticle (NP) toxicity. This study investigated the combined toxicity of ZnO NPs and a panel of polyphenols. Surprisingly, polyphenols with both high and almost no radical scavenging activities could elicit cytoprotective effects against NP exposure in Caco-2 cells, which were primarily influenced by the positions of the hydroxyl group. Polyphenols with different chemical structures variously influenced the hydrodynamic size, zeta potential, and solubility of ZnO NPs as well as NP-induced intracellular superoxide and Zn ions, which could all contribute to the combined effects. Responses of human endothelial cells appeared to be different from the responses of Caco-2 cells, which may indicate cell-type dependent responses to combined exposure of NPs and phytochemicals. In conclusion, the data from this study suggested a pivotal role of chemical structures of phytochemicals in determining their capacity to affect ZnO NP toxicity.