Novel solid dispersions of benznidazole: Preparation, dissolution profile and biological evaluation as alternative antichagasic drug delivery system

Organic solvent-free benznidazole nanosuspension as an approach to a novel pediatric formulation for Chagas disease

Aim: Benznidazole (BNZ), a class-II drug, is the primary treatment for Chagas disease, but its low aqueous solubility presents challenges in formulation and efficacy. Nanosuspensions (NS) could potentially address these issues.Methods: BNZ-NS were prepared using a simple, organic solvents-free nano-milling approach. Physicochemical characterizations were conducted on both NS and lyophilized solid-state BNZ-nanocrystals (NC).Results: BNZ-NS exhibited particle size <500 nm, an acceptable polydispersity index (0.23), high Z-potential, and physical stability for at least 90 days. BNZ-NC showed tenfold higher solubility than pure BNZ. Dissolution assays revealed rapid BNZ-NS dissolution. BNZ-NC demonstrated biocompatibility on an eukaryotic cell and enhanced BNZ efficacy against trypomastigotes of Trypanosoma cruzi.Conclusion: BNZ-NS offers a promising alternative, overcoming limitations associated with BNZ for optimized pharmacotherapy.

Poly-ε-Caprolactone Implants for Benznidazole Prolonged Release: An Alternative to Chagas Disease Oral Treatment

Benznidazole (BZ) tablets are the currently prescribed treatment for Chagas disease. However, BZ presents limited efficacy and a prolonged treatment regimen with dose-dependent side effects. The design and development of new BZ subcutaneous (SC) implants based on the biodegradable poly-ɛ-caprolactone (PCL) is proposed in this study for a controlled release of BZ and to improve patient compliance. The BZ–PCL implants were characterized by X-ray diffraction, differential scanning calorimetry, and scanning electron microscopy, which indicated that BZ remains in its crystalline state dispersed in the polymer matrix with no polymorphic transitions. BZ–PCL implants, even at the highest doses, induce no alteration of the levels of hepatic enzymes in treated animals. BZ release from implants to blood was monitored in plasma during and after treatment in healthy and infected animals. Implants at equivalent oral doses increase the body’s exposure to BZ in the first days compared with oral therapy, exhibiting a safe profile and allowing sustained BZ concentrations in plasma to induce a cure of all mice in the experimental model of acute infection by the Y strain of T. cruzi. BZ–PCL implants have the same efficacy as 40 daily oral doses of BZ. Biodegradable BZ implants are a promising option to reduce failures related to poor adherence to treatment, with more comfort for patients, and with sustained BZ plasma concentration in the blood. These results are relevant for optimizing human Chagas disease treatment regimens.

pH-responsive phthalate cashew gum nanoparticles for improving drugs delivery and anti-Trypanosoma cruzi efficacy

Nanotechnology is a crucial technology in recent years has resulted in new and creative applications of nanomedicine. Polymeric nanoparticles have increasing demands in pharmaceutical applications and require high reproducibility, homogeneity, and control over their properties. Work explores the use of cashew phthalate gum (PCG) as a particle-forming polymer. PCG exhibited a pH-sensitive behavior due to the of acid groups on its chains, and control drug release. We report the development of nanoparticles carrying benznidazole. Formulations were characterized by DLS, encapsulation efficiency, drug loading, FTIR, pH-responsive behavior, release, and in vitro kinetics. Interaction between polymer and drug was an evaluated by molecular dynamics. Morphology was observed by SEM, and in vitro cytotoxicity by MTT assay. Trypanocidal effect for epimastigote and trypomastigote forms was also evaluated. NPs responded to the slightly basic pH, triggering the release of BNZ. In acidic medium, they presented small size, spherical shape, and good stability. It was indicated NP with enhanced biological activity, reduced cytotoxicity, high anti T. cruzi performance, and pH-sensitive release. This work investigated properties related to the development and enhancement of nanoparticles. PCG has specific physicochemical properties that make it a promising alternative to drug delivery, however, there are still challenges to be overcome.

Current Trends on Solid Dispersions: Past, Present, and Future

Solid dispersions have achieved significant interest as an effective means of enhancing the dissolution rate and thus the bioavailability of a range of weakly water-soluble drugs. Solid dispersions of weakly water-soluble drugs with water-soluble carriers have lowered the frequency of these problems and improved dissolution. Solid dispersion is a solubilization technology emphasizing mainly on, drug-polymer two-component systems in which drug dispersion and its stabilization is the key to formulation development. Therefore, this technology is recognized as an exceptionally useful means of improving the dissolution properties of poorly water-soluble drugs and in the latest years, a big deal of understanding has been accumulated about solid dispersion, however, their commercial application is limited. In this review article, emphasis is placed on solubility, BCS classification, and carriers. Moreover, this article presents the diverse preparation techniques for solid dispersion and gathers some of the recent technological transfers. The different types of solid dispersions based on the carrier used and molecular arrangement were underlined. Additionally, it summarizes the mechanisms, the methods of preparing solid dispersions, and the marketed drugs that are available using solid dispersion approaches.

Improving the oral delivery of benznidazole nanoparticles by optimizing the formulation parameters through a design of experiment and optimization strategy

Chagas disease is a neglected tropical disease affecting the American continent and also some regions of Europe. Benznidazole, approved by FDA, is a drug of choice but its poor aqueous solubility may lead to a low bioavailability and efficacy. Therefore, the aim of this study was to formulate nanoparticles of benznidazole for improving its solubility, dissolution and permeability. A Plackett-Burman design was applied to identify the effect of 5 factors over 4 responses. Then, a Central Composite design was applied to estimate the values of the most important factors leading to the best compromise between highest nanoprecipitation efficiency, drug solubility and lower particle size. The optimized nanoparticles were evaluated for in vitro drug release in biorelevant media, stability studies and transmission electron microscopy. Biocompatibility and permeability of nanoparticles were evaluated on the Caco-2 cell line. The findings of the optimization process indicated that concentration of drug and stabilizer influenced significantly the particle size while concentration of stabilizer and organic/water phase volume ratio mainly influenced the drug solubility. Stability studies suggested that benznidazole nanoparticles were stable after 12 months at different temperatures. Minimal interactions of those nanoparticles and mucin glycoproteins suggested favorable properties to address the intestinal mucus barrier. Cell viability studies confirmed the safety profile of the optimized formulation and showed an increased permeation through the Caco-2 cells. Thus, this study confirmed the suitability of the design of experiment and optimization approach to elucidate critical parameters influencing the quality of benznidazole nanoparticles, which could lead to a more efficient management of Chagas disease by oral route.

Recent advances in the surfactant and controlled release polymer-based solid dispersion

The oral route is the most preferred delivery route for drug administration due to its advantages such as lower cost, improved patient compliance, no need for trained personnel and the drug reactions are generally less severe. The major problem with new molecules in the drug discovery pipeline is poor solubility and dissolution rate that ultimately results in low oral bioavailability. Numerous techniques are available for solubility and bioavailability (BA) enhancement, but out of all, solid dispersion (SD) is proven to be the most feasible due to the least issues in manufacturing, processing, storage, and transportation. In the past few years, SD had been extensively applied to reinforce the common issues of insoluble drugs. Currently, many hydrophobic and hydrophilic polymers are used to prepare either immediate release or controlled release SDs. Therefore, the biological behavior of the SDs is contingent upon the use of appropriate polymeric carriers and methods of preparation. The exploration of novel carriers and methodologies in SD technology leads to improved BA and therapeutic effectiveness. Moreover, the clinical applicability of SD-based formulations has been increased with the discovery of novel polymeric carriers. In this review, emphasis is laid down on the present status of recent generations of SDs (i.e., surfactant and controlled release polymer-based SD) and their application in modifying the physical properties of the drug and modulation of pharmacological response in different ailments.

Benznidazole/Poloxamer 407 Solid Dispersion as a New Strategy to Improve the Treatment of Experimental Trypanosoma cruzi Infection

Benznidazole and nifurtimox are the only drugs specifically approved for the treatment of Chagas disease. Both compounds are given orally in tablets, but occasionally are ineffective and cause adverse effects. Benznidazole, the first-line treatment in many countries, is a compound with low solubility in water that is administered at high doses for long periods of time. To improve its solubility, we developed a new liquid formulation on the basis of solid dispersions (SD) using the amphiphilic polymer poloxamer 407. Herein we present data on its trypanocidal performance in mouse models of acute and chronic Trypanosoma cruzi infection. SD at doses of 60 or 15 mg/kg per day given with different administration schedules were compared with the commercial formulation (CF; 50 mg/kg per day) and vehicle. The SD performance was assessed by direct parasitemia, total anti-T. cruzi antibodies, and parasitic burden in tissues after 4 or 6 mo posttreatment. The efficacy of the SD was equivalent to the CF but without manifest side effects and hepatotoxicity. Considering our previous data on solubility, together with these on efficacy, this new liquid formulation represents a promising alternative for the treatment of Chagas disease, particularly in cases when dosing poses a challenge, as in infants.

Therapeutic Applications of Solid Dispersions for Drugs and New Molecules: In Vitro and In Vivo Activities

This review aims to provide an overview of studies that address the use, in therapeutic applications, of solid dispersions (SDs) with biological activities in vitro and/or in vivo mainly made up of polymeric matrices, as well as to evaluate the bioactive activity of their constituents. This bibliographic survey shows that the development of solid dispersions provides benefits in the physicochemical properties of bioactive compounds, which lead to an increase in their biological potential. However, despite the reports found on solid dispersions, there is still a need for biological assay-based studies, mainly in vivo, to assist in the investigation and to devise new applications. Therefore, studies based on such an approach are of great importance to enhance and extend the use of solid dispersions in the most diverse therapeutic applications.

Formulation technologies and advances for oral delivery of novel nitroimidazoles and antimicrobial peptides

Antibiotic resistance has become a global crisis, driving the exploration for novel antibiotics and novel treatment approaches. Among these research efforts two classes of antibiotics, bicyclic nitroimidazoles and antimicrobial peptides, have recently shown promise as novel antimicrobial agents with the possibility to treat multi-drug resistant infections. However, they suffer from the issue of poor oral bioavailability due to disparate factors: low solubility in the case of nitroimidazoles (BCS class II drugs), and low permeability in the case of peptides (BCS class III drugs). Moreover, antimicrobial peptides present another challenge as they are susceptible to chemical and enzymatic degradation, which can present an additional pharmacokinetic hurdle for their oral bioavailability. Formulation technologies offer a potential means for improving the oral bioavailability of poorly permeable and poorly soluble drugs, but there are still drawbacks and limitations associated with this approach. This review discusses in depth the challenges associated with oral delivery of nitroimidazoles and antimicrobial peptides and the formulation technologies that have been used to overcome these problems, including an assessment of the drawbacks and limitations associated with the technologies that have been applied. Furthermore, the potential for supercritical fluid technology to overcome the shortcomings associated with conventional drug formulation methods is reviewed.

Efficacy of continuous versus intermittent administration of nanoformulated benznidazole during the chronic phase of Trypanosoma cruzi Nicaragua infection in mice

Background

Benznidazole and nifurtimox are effective drugs used to treat Chagas’ disease; however, their administration in patients in the chronic phase of the disease is still limited, mainly due to their limited efficacy in the later chronic stage of the disease and to the adverse effects related to these drugs.

Objectives

To evaluate the effect of low doses of nanoformulated benznidazole using a chronic model of Trypanosoma cruzi Nicaragua infection in C57BL/6J mice.

Methods

Nanoformulations were administered in two different schemes: one daily dose for 30 days or one dose every 7 days, 13 times.

Results

Both treatment schemes showed promising outcomes, such as the elimination of parasitaemia, a reduction in the levels of T. cruzi-specific antibodies and a reduction in T. cruzi-specific IFN-γ-producing cells, as well as an improvement in electrocardiographic alterations and a reduction in inflammation and fibrosis in the heart compared with untreated T. cruzi-infected animals. These results were also compared with those from our previous work on benznidazole administration, which was shown to be effective in the same chronic model.

Conclusions

In this experimental model, intermittently administered benznidazole nanoformulations were as effective as those administered continuously; however, the total dose administered in the intermittent scheme was lower, indicating a promising therapeutic approach to Chagas’ disease.

Improving the Dissolution of Triclabendazole from Stable Crystalline Solid Dispersions Formulated for Oral Delivery

Triclabendazole belongs to the class II/IV of the Biopharmaceuticals Classification System, and its low aqueous solubility represents a major drawback during the development of effective dosage forms. Therefore, the goal of this study was to elucidate whether polymeric solid dispersions would represent a suitable approach to overcome such disadvantage. Due to the lack of information on triclabendazole release, four different dissolution media were evaluated to analyze drug dissolution rate. The polymeric solid dispersions were characterized by X-ray diffraction and Fourier transform infrared spectroscopy. The selected final formulations were further stored for 24 months, and their physical stability was evaluated by means of X-ray diffraction and drug dissolution assays. Drug solubility studies indicated that poloxamer 407 (P407) solubilized a higher amount of drug than polyethylene glycol 6000. Drug-to-carrier ratio, nature of the selected carriers, and the type of dissolution media were important factors for increasing dissolution. By infrared spectroscopy, there were no specific interactions between the drug and polymers. The physicochemical characterization of the systems showed a detectable evidence of drug amorphization by increasing the carrier ratio. Micromeritic studies indicated that raw triclabendazole, physical mixtures, and reference formulation showed poor flow properties, in contrast to the triclabendazole:P407 solid dispersion sample. Both the crystalline properties and dissolution rate of selected samples were very similar after 24 months at room temperature. Thus, considering physical stability and dissolution studies, the development of the solid dispersion is a very suitable methodology to improve triclabendazole dissolution and, potentially, its biopharmaceutical performance.

Using prodigiosin against some gram-positive and gram-negative bacteria and Trypanosoma cruzi

Background

This work aimed to explore the action of natural prodigiosin on both bacterial organisms and Trypanosoma cruzi cells.

Methods

Natural prodigiosin pigment was extracted and purified from cultures of Serratia marcescens. Two media, peanut broth and peptone glycerol broth, both recommended in the literature for prodigiosin production, were compared. The prodigiosin obtained was employed to explore its antimicrobial properties against both bacteria and Trypanosoma cruzi cells.

Results

Peanut broth yielded four times more prodigiosin. The prodigiosin showed remarkable activity (minimal inhibitory concentrations in the range of 2-8 µM for bacteria and half maximal inhibitory concentration of 0.6 µM for Trypanosoma cruzi). In fact, the prodigiosin concentration required to inhibit parasite growth was as low as 0.25 mg/l versus 4.9 mg/l of benznidazole required. Furthermore, atomic force microscopy revealed marked morphological alterations in treated epimastigote forms, although no pore-formation activity was detected in protein-free environments.

Conclusions

This work demonstrates the potential usefulness of prodigiosin against some gram-positive and gram-negative bacteria and Trypanosoma cruzi although further studies must be done in order to assess its value as a candidate molecule.

Development and characterization of benznidazole nano- and microparticles: A new tool for pediatric treatment of Chagas disease?

Benznidazole (BNZ) is the drug of choice for the treatment of Chagas disease in many countries. However, its low water solubility produces low and/or variable oral bioavailability. Thus, the aim of this work was to formulate micro- and nanoparticles based on Eudragit^® RS PO and Eudragit^® RL PO as a convenient approach to increase the dissolution rate of BNZ. The microparticles were obtained by means of spray-drying process while the nanoparticles were prepared through the nanoprecipitation technique and further freeze-drying. The results indicated that nanoparticles were obtained in 86% yield while microparticles were obtained in 68% yield. In both cases, the encapsulation efficiency of particles was greater than 78% while drug loading capacity was nearly 24% w/w and 18% w/w, after spray-drying and freeze-drying procedures, respectively. Images of scanning electron microscopy showed that the particles obtained by spray-drying and freeze-drying were in the micrometer and nanometer scale, respectively. FT-IR spectra of BNZ-loaded particles obtained by both methods showed characteristic bands of BNZ confirming that part of drug remained on their surface. Thermal analysis revealed that the drug crystallinity after both methods decreased. Physical stability evaluation of the nanoparticles confirmed that Pluronic^® F68 was suitable to keep the particles size in a range of 300 nm after 70 days storage at 4 ± 2 °C. In-vitro release studies showed increased dissolution rate of drug from the particles obtained by both methods respect to untreated BNZ. The kinetics of drug release in acid media followed the Higuchi kinetics indicating drug diffusion mechanism from particles.

Tailoring microstructural, drug release properties, and antichagasic efficacy of biocompatible oil-in-water benznidazol-loaded nanoemulsions

This study explored the transition of lamellar-type liquid crystal (LLC) to biocompatible oil-in-water nanoemulsions able to modify benznidazole (BNZ) release and target the drug to cells infected with the T. cruzi parasite. Three cosolvents (2methylpyrrolidone [NMP], polyethylene glycol [POL], and propylene glycol [PRO] were tested to induce the transition of anisotropic LLC systems to isotropic nanoemulsions. Mixtures of soy phosphatidylcholine with sodium oleate stabilized the dispersions of medium chain triglyceride in water. Rheological measurements, polarized microscopy, and small angle X-ray scattering demonstrated that there is a phase transition from LLC to desired nanoemulsions. These small and narrow droplet-sized nanocarriers exhibited some advantages and promising features, such as the enhanced BNZ aqueous solubility and slow drug release rate. In vitro cell biocompatibility of formulations was assessed in the Vero E6 and SiHa cell lines. Drug-loaded nanoemulsions inhibited the epimastigote growth of the T. cruzi parasite (IC50 0.208 ± 0.052 μg mL^-1) and reduced its infective life form trypomastigote (IC50 0.392 ± 0.107 μg mL^-1). The oil-in-water nanoemulsions were demonstrated as promising biocompatible liquid drug delivery systems capable of improving the BNZ trypanocidal activity for the treatment of Chagas disease.

Technological innovation strategies for the specific treatment of Chagas disease based on Benznidazole

Caused by Trypanosoma cruzi, Chagas disease is responsible for public health problems greater in magnitude than those attributed to malaria, schistosomiasis, or leishmaniasis. A factor in the socioeconomic development of poor countries, Chagas disease can cause death due to a high parasitic burden during its acute phase due and irreversible damage in organs such as the heart, esophagus, and colon during its chronic phase, even when the number of parasites is minimal. For treating Chagas disease, benznidazole (BNZ) remains the drug of choice and, in Latin America, the only drug on the market for treating the disease. However, BNZ has exhibited insufficient activity in the chronic phase of Chagas disease, required administration in large doses, prolonged treatment, and shown a high incidence of adverse reactions (vomiting, rash, peripheral neuropathy, and spinal cord depression), toxicity, and low solubility in water. As an antidote, pharmaceutical technologies have been introduced that can improve BNZ's solubility and dissolution, as well as reduce side effects in light of its bioavailability, all of which can enhance therapy for Chagas disease. In response to that trend, by conducting a literature review, we sought to identify current pharmaceutical technologies used in tandem with BNZ to improve therapy for Chagas disease. Documented techniques include emulsion and microemulsion formation, solutions, parenteral formulas, micronization, and drug delivery systems supported by the development of nanoparticles and cyclodextrins, solid dispersions, and the use of metal-organic frameworks as innovative excipients. Such technologies increase the water solubility of BNZ by 4-25-fold on dissolution and an 85% release with efficacy in only a few minutes, as recorded during a viability experiment with nanoparticle suspensions. That experiment demonstrated the need for a lower concentration of BNZ to kill 50% of trypomastigote forms of T. cruzi, described in terms of the formation of BNZ-cyclodextrin complexes, and modulating and vectoring of the antichagasic by using metal-organic frameworks. Altogether, the promising results of research identified can enable strategies to improve solubility and efficacy of BNZ, as well as therapy for Chagas disease.

Multi-kinetic release of benznidazole-loaded multiparticulate drug delivery systems based on polymethacrylate interpolyelectrolyte complexes

Interpolyelectrolyte complexes (IPEC) formulated as multiparticulate drug delivery systems (MDDS) are interesting carriers to improve drug' performance. Benznidazole (BZ) is the first-line drug for Chagas treatment; however, it presents side effects and toxicity, conditioning its efficacy and safety. The goal of this work was to obtain novel MDDS composed by IPEC based on different polymethacrylate carriers loaded with BZ and to investigate in vitro drug delivery performance for oral administration. Physicochemical characterizations were studied and preclinical studies in a murine model of acute Chagas disease were also performed. The MDDS composed by BZ-loaded IPEC based on polymethacrylates were obtained by casting solvent followed by wet granulation methods with yields >83%. FT-IR demonstrated ionic interaction between the polyelectrolytes. Confocal microscopy, DSC and PXRD revealed a fraction uniformly distributed of free BZ on the multiparticles. The rheological evaluation of the MDDS showed adequate flow features for their formulation in hard gelatin-capsules. The type and composition of IPEC conditioned the modulation of BZ release and fluid uptake results. MDDS based on more hydrophylic Eudragit® showed very fast dissolution (Q_15min > 85%), while an extended release (Q_120min ≤ 40%) for the hydrophobic ones was observed. Capsules containing a combination of two MDDS with different release profile of BZ showed promising properties to improve Chagas disease pharmacotherapy in the preliminary in vivo assay performed, in which the BZ-loaded MDDS exhibited efficacy to reduce parasitemia, while decreasing the levels of liver injury markers in comparison to BZ conventional treatment. Multi-kinetic BZ delivery systems developed are interesting pharmaceutical alternatives to improve the treatment of Chagas disease.

Benznidazole Nanoformulates: A Chance to Improve Therapeutics for Chagas Disease

This article describes the characterization of various encapsulated formulations of benznidazole, the current first-line drug for the treatment of Chagas disease. Given the adverse effects of benznidazole, safer formulations of this drug have a great interest. In fact, treatment of Chagas disease with benznidazole has to be discontinued in as much as 20% of cases due to side effects. Furthermore, modification of delivery and formulations could have potential effects on the emergence of drug resistance. The trypanocidal activity of new nanostructured formulations of benznidazole to eliminate Trypanosoma cruzi was studied in vitro as well as their toxicity in two cultured mammalian cell lines (HepG2 and Fibroblasts). Nanoparticles tested included nanostructured lipid carriers, solid lipid nanoparticles, liposomes, quatsomes, and cyclodextrins. The in vitro cytotoxicity of cyclodextrins-benznidazole complexes was significantly lower than that of free benznidazole, whereas their trypanocidal activity was not hampered. These results suggest that nanostructured particles may offer improved therapeutics for Chagas disease.

Characterization of Heterogeneity and Spatial Distribution of Phases in Complex Solid Dispersions by Thermal Analysis by Structural Characterization and X-ray Micro Computed Tomography

PURPOSE

This study investigated the effect of drug-excipient miscibility on the heterogeneity and spatial distribution of phase separation in pharmaceutical solid dispersions at a micron-scale using two novel and complementary characterization techniques, thermal analysis by structural characterization (TASC) and X-ray micro-computed tomography (XμCT) in conjunction with conventional characterization methods.

METHOD

Complex dispersions containing felodipine, TPGS, PEG and PEO were prepared using hot melt extrusion-injection moulding. The phase separation behavior of the samples was characterized using TASC and XμCT in conjunction with conventional thermal, microscopic and spectroscopic techniques. The in vitro drug release study was performed to demonstrate the impact of phase separation on dissolution of the dispersions.

RESULTS

The conventional characterization results indicated the phase separating nature of the carrier materials in the patches and the presence of crystalline drug in the patches with the highest drug loading (30% w/w). TASC and XμCT where used to provide insight into the spatial configuration of the separate phases. TASC enabled assessment of the increased heterogeneity of the dispersions with increasing the drug loading. XμCT allowed the visualization of the accumulation of phase separated (crystalline) drug clusters at the interface of air pockets in the patches with highest drug loading which led to poor dissolution performance. Semi-quantitative assessment of the phase separated drug clusters in the patches were attempted using XμCT.

CONCLUSION

TASC and XμCT can provide unique information regarding the phase separation behavior of solid dispersions which can be closely associated with important product quality indicators such as heterogeneity and microstructure.

Exploring the potential activity spectrum of two 5-nitroindazolinone prototypes on different Trypanosoma cruzi strains

In the present study, the potential activity of two 5-nitroindazole derivatives previously proposed as suitable antichagasic prototypes was further evaluated on diverseTrypanosoma cruzistrains belonging to two discrete typing units (DTUs) frequently associated with human infection (i.e. DTUs TcII and TcVI). The trypanocidal profile that both 2-benzyl-1-propyl (22) and 2-benzyl-1-butyl (24) derivatives achieved on Tulahuen amastigotes (IC50 = 3·56 ± 0·99 and 6·31 ± 1·04 µm, respectively) correlates with that of formerly obtained on CL Brener, corroborating an outstanding activity on DTU TcVI parasites. Moreover, a sequential screening on extracellular and intracellular stages ofT. cruziY (DTU TcII) demonstrated also the effectiveness of 22 and 24 over this strain on a similar range of activity (IC50epimastigotes = 3·55 ± 0·47 and 7·92 ± 1·63 µm, IC50amastigotes = 2·80 ± 0·46 and 9·02 ± 5·26 µm, respectively). These results, supported by a lack of toxicity registered over either L929 fibroblasts or primary cultures of cardiomyocytes, confirm that 5-nitroindazolinones 22 and 24 display great selectivity on both drug-sensitive (CL and Tulahuen) and drug-moderately resistant (Y)T. cruzistrains, and therefore, represent an important outcome in the research of Chagas disease chemotherapy.