Pectin recovery from sugar beet pulp enhanced by high-voltage electrical discharges

Spectroscopic and Microscopic Analysis of Apple Pectins

Apple pomace pectins, extracted using various methods (water, cellulase, arabinase, and arabinase with mannanase), and commercial apple pectin were studied, analyzing their morphology and chemical structure. The microscopic analysis revealed morphological differences, with a log-normal particle size distribution observed in most samples, except for those extracted with water. Cellulase-extracted pectin exhibited the most spherical morphology, while enzymatically extracted pectins displayed uneven surfaces. The FT-IR analysis indicated structural changes, shifts in O-H bands, and the degree of methoxylation (DM) ranged from 30.25% to 58%, with all the pectins classified as high-methoxy pectins. The NMR (1H and 13C) analysis confirmed the presence of arabinans, galactans, galacturonans, and rhamnose, and the calculated DM and acetylation (DAc) values were consistent with the results obtained using conventional methods. These results provide insight into the influence of extraction methods on pectin properties, which is relevant to the pharmaceutical and food industries, and confirm the structural similarity between enzymatically extracted pectins and commercial pectin.

Efficient pectin recovery from sugar beet pulp as effective bio-based coating for Pacific white shrimp preservation

This study demonstrates the valorization of sugar beet pulp (SBP)-derived pectin to produce bio-based coatings for shrimp preservation. Pectin extraction was assessed at varying temperatures and extraction times to achieve tailored properties (high methoxyl-pectins, degree of esterification-DE >79.0 %) leading to 11.5 % extraction yield, 78.1 % galactouronic acid content and 80 % DE at optimal conditions (pH 1.5, 80 °C, 2 h). Pectin-based coatings supplemented with ascorbic acid (AA) (0.5-2.0 %) led to organoleptically acceptable shrimps with significantly lower total color differences during 28-days of storage, compared to uncoated and pectin-coated counterparts. AA-based coatings delayed shrimp melanosis, expressed as reduced polyphenoloxidase activity (48-86 %). Rich-in-holocellulose solids derived after pectin extraction were used for bacterial cellulose (BC) production, pinpointing the SBP potential as a multi-purpose feedstock. Fed-batch fermentation enhanced BC concentration (by 110 %) and productivity (1.6-fold higher) compared to batch-cultures. Pectin produced within a SBP-based biorefinery could be applied as bio-based coating with food packaging potential.

An innovative technique for the extraction and stability of polyphenols using high voltage electrical discharge: HVED-Assisted Extraction of Polyphenols

Polyphenols are the main group of phytochemicals with several biological activities. Due to the adverse effects of conventional solvent extraction methods, innovative extraction techniques have been used as alternatives to overcome these problems. High voltage electric discharge (HVED) is an eco-friendly innovative extraction technique based on the phenomenon of electrical breakdown in water. This technique induces physical and chemical processes, leading to product fragmentation, cellular damage, and liberation of bioactive compounds. HVED treatment can extract polyphenols at lower temperatures and shorter times than the conventional solvent extraction methods. This review summarizes the effect of HVED processing parameters on the recovery and stability of polyphenols from plant sources. Hydroethanolic solutions improve the HVED-assisted extraction of polyphenols compared to water. Moreover, acidic solvents are suitable for the high recovery and protection of polyphenols during electric discharges. This study revealed the efficacy of the HVED technique in extracting polyphenols for their utilization in the food and pharmaceutical industries.

Tailoring Pectin-PLA Bilayer Film for Optimal Properties as a Food Pouch Material

This study focuses on developing a biodegradable film using a novel hybrid citrus peel pectin. A bilayer approach with PLA was proposed and optimized using Response Surface Methodology (RSM) to complement pectin films' mechanical and barrier property limitations. The optimized film composition (2.90 g PLA and 1.96 g pectin) showed enhanced mechanical strength with a tensile strength (TS) of 7.04 MPa and an elongation at break (EAB) of 462.63%. In addition, it demonstrated lower water vapor (1.45 × 10-10 g/msPa), oxygen (2.79 × 10-7 g/ms) permeability, and solubility (23.53%). Compared to single-layer pectin films, the optimized bilayer film had a 25% increased thickness, significantly improved water barrier (3806 times lower) and oxygen barrier (3.68 times lower) properties, and 22.38 times higher stretchability, attributed to hydrogen bond formation, as confirmed by FTIR analysis. The bilayer film, effectively protected against UV and visible light, could be a barrier against light-induced lipid oxidation. Moreover, it demonstrated superior seal efficiency, ensuring secure sealing in practical applications. The bilayer pouch containing mustard dressing exhibited stable sealing with no leakage after immersion in hot water and ethanol, making it suitable for secure food pouch packaging.

Novel edible films fabricated with HG-type pectin extracted from different types of hybrid citrus peels: Effects of pectin composition on film properties

This study investigated the valorization of novel HG-type hybrid citrus pectins derived from three cultivars: Setoka (ST), Kanpei (KP), and Shiranui (SH), and their application as packaging materials. The physicochemical properties of these pectins and their corresponding films were evaluated and compared to commercial citrus pectin. Significant variations were observed in pectin yield (18.15-24.12 %) and other physicochemical characteristics, such as degree of esterification (DE), degree of methoxylation (DM), and monosaccharide composition, among the different cultivars. All hybrid citrus pectins were classified as high-methoxy pectin types (66.67-72.89 %) with typical structural configurations like commercial citrus pectin. However, hybrid citrus pectin films exhibited superior physical properties, including higher mechanical strength, flexibility, and lower water solubility than commercial citrus pectin film, while maintaining similar transparency and moisture content. Additionally, the films displayed smooth and uniform surface morphology, confirming their excellent film-forming properties. Correlation analysis revealed that DE positively influenced mechanical properties (r = 1.0). Furthermore, the monosaccharide composition of pectins showed strong relationships (r = 0.8-1.0) with the film's mechanical and barrier properties. These findings highlight the potential of hybrid citrus pectin as potential packaging material, and the knowledge of the structure-function relationship obtained in this study could be useful for the tailored modification of citrus pectin-based packages.

Valorization of walnut green husk (Juglans regia L.) through sequential electrohydrodynamic extraction of pectin and phenolics: Process optimization and multidimensional analysis

This study aimed to optimize the extraction of pectin and phenolics from walnut green husk using the electrohydrodynamic method (EHD) and assess its impact on the chemical structure and properties of pectin. A comparative analysis was conducted with acidified water as the conventional extraction method. The results revealed significant improvements under the optimal EHD conditions (36.8 min, 17.5 kV, 90 °C), leading to a remarkable increase of over 64 % in pectin yield and >20 % in total phenolic content in half the extraction time. Chemical analysis showed that pectin samples contain 1.4-1.7 % ash, 3.6-4.6 % protein, over 90 % carbohydrates, and a galacturonic acid content ranging from 67.7 to 68.2 g/g. Both extraction methods yielded pectin with a high methoxyl degree, comparable thermal stability, and amorphous structure. EHD treatment resulted in reduced molecular weight, degree of esterification, water-holding capacity, and emulsion stability of pectin while enhancing its solubility and emulsion capacity. In summary, EHD treatment significantly improved extraction yield and changed the functionality of pectin, particularly in terms of emulsion activity. This alteration should be considered when utilizing pectin for specific applications.

Advances in efficient extraction of essential oils from spices and its application in food industry: A critical review

With the increase of people's awareness of food safety, it is crucial to find natural and green antimicrobial agents to replace traditional antimicrobial agents. Essential oils of spices (SEOs) are low toxicity or nontoxic, which exhibited antioxidants and antimicrobial activity according to many in vitro and in situ experiments. Spices are widely available and low cost as a plant raw material for the extraction of SEOs. This review summarized highly efficient extraction techniques for SEOs, such as physical field assisted extraction technology, supercritical fluid extraction, and biological-based techniques. Furthermore, purification of SEOs and components were also recapitulated. Purification techniques of SEOs improve their utilization value due to the increased content of bioactive components. Finally, the review concentrated on the applications of SEOs in food industry, including food preservation, food active packaging by means of films or coatings, antioxidant properties. In addition, addressing the problem of unstability of SEOs and its role to inhibit the pathogenic bacteria, the encapsulation of SEOs for use in the food industrial sectors reduces the safety risk to human health.

Roles of physical fields in the extraction of pectin from plant food wastes and byproducts: A systematic review

Pectin is a naturally occurring hydrocolloid found in the cell wall and middle lamella of many plants and has numerous functional applications in food and other related industries. The type of extraction methods used in production has a strong influence on the structural or physicochemical properties of the resultant pectin and the potential application or market value of the produced pectin. Many conventional extraction methods are well-established and commercially well adopted. However, the increased demand for pectin due to limitations of the existing methods in terms of efficiency and influence on end product quality has been renewed in developing novel techniques or procedures that help to alleviate these problems. In this review paper, a series of strategies involving the application of physical fields, such as acoustic, electromagnetic, electric and mechanical one, are reviewed for potential opportunities to improve the yield and quality attributes of pectin extracted from plant food wastes and byproducts. The extraction mechanism, processing equipment, key operating parameters as well as advantages and disadvantages of each method are systematically reviewed, and findings and conclusions on the potential applications of each method are described. Moreover, the challenges and future directions of physical field assisted extraction (PFAE) of pectin are also discussed to facilitate a better understanding of the complex mechanism in PFAE and optimizing operational parameters. This review may also provide specific theoretical information and practical applications to improve the design and scale up PFAE of pectin.

Evaluation of pectin extractions and their application in the alkaline Maillard reaction

A 2³ factorial design was used to evaluate the influence of temperature, catalyst and time and esterification degree (DE) of pectin obtained from mango, orange and tangerine peels as well as tamarind seeds by using the acid hydrolysis method. The study showed that a high temperature positively influenced the percentage of pectin yield for the four second generation biomasses. Nevertheless, the temperature showed a greater influence in the solubility and diffusion of the acid solvent in the tamarind seed matrix, resulting a pectin recovery 32.9%. Concerning the %DE, the most statistically significant value observed was dependent on the type of biomass studied. The %DE and the nature of the pectin are determining factors in the pectin's final use, in the present work the pectin extracted was used to produce furfural, a precursor of high value chemicals. The furfural production was achieved through alkaline hydrolysis and enhanced using the Maillard reaction, reaching a maximum concentration of 71.8 g/L which represents a 42.1% increase from the alkaline hydrolysis.

A review of sugar beet pectin-stabilized emulsion: extraction, structure, interfacial self-assembly and emulsion stability

In recent years, sugar beet pectin as a natural emulsifier has shown great potential in food and pharmaceutical fields. However, the emulsification performance depends on the molecular structure of sugar beet pectin, and the molecular structure is closely related to the extraction method. This review summarizes the extraction methods of pectin, structure characterization methods and the current research status of sugar beet pectin-stabilized emulsions. The structural characteristics of sugar beet pectin (such as degree of methylation, degree of acetylation, degree of blockiness, molecular weight, ferulic acid content, protein content, neutral sugar side chains, etc.) are of great significance to the emulsifying activity and stability of sugar beet pectin. Compared with traditional hot acid extraction method, ultrasonic-assisted extraction, microwave-assisted extraction, subcritical water-assisted extraction, induced electric field-assisted extraction and enzyme-assisted extraction can improve the yield of sugar beet pectin. At the same time, compared with harsh extraction conditions (too high temperature, too strong acidity, too long extraction time, etc.), mild extraction conditions can better preserve these emulsifying groups in sugar beet pectin molecules, which are beneficial to improve the emulsifying properties of sugar beet pectin. In addition, the interfacial self-assembly behavior of sugar beet pectin induced by the molecular structure is crucial to the long-term stability of the emulsion. This review provides a direction for extracting or modifying sugar beet pectin with specific structure and function, which is instructive for finding alternatives to gum arabic.

Characterization of Pectin from Grape Pomace: A Comparison of Conventional and Pulsed Ultrasound-Assisted Extraction Techniques

The yield, physicochemical and rheological parameters of grape pomace pectin (Fetească Neagră and Rară Neagră) obtained by conventional extraction (CE) were compared to those acquired by pulsed ultrasound-assisted extraction (PUAE). Extraction temperature (70–90 °C), pH (1–3) and time (1–3 h) were considered as independent variables for CE, while amplitude (20–100%), pH (1–3) and time (20–60 min) for PUAE. The optimal conditions for maximum yield and physicochemical parameters of pectin samples extracted by CE were temperature of 90 °C, pH 1.9 for 164 min (9.96% yield, 79.91 g/100 g of galacturonic acid (GalA) content, 81.28% of degree of esterification (DE) and 5.52 × 10⁴ g/mol of molecular weight (M_w) for Fetească Neagră (FN) pectin; 11.08% yield, 80.05 g/100 g of GalA content, 80.86% of DE and 5.59 × 10⁴ g/mol of M_w for Rară Neagră (RN) pectin), while for PUAE they were amplitude of 100%, pH 1.8 for 60 min (8.83% yield, 80.24 g/100 g of GalA content, 81.07% of DE and 4.19 × 10⁴ g/mol of M_w for FN pectin; 8.94% yield, 78.64 g/100 g of GalA content, 80.04% of DE and 4.23 × 10⁴ g/mol of M_w for RN pectin). The yield and physicochemical parameters of CE pectin were higher than PUAE pectin. The FT-IR spectra of pectin samples revealed the occurrence of polysaccharide compound, while rheology characteristics confirming its application in different food products.

Structural Determination of Pectins by Spectroscopy Methods

Plant polysaccharides include pectins, which are responsible for an important role in plant physiology and are part of the plant cell wall. These compounds are known as gelling and stabilizing agents, which are widely used in the food industry. The scientific literature lacks precise information on the spectroscopy of apple pectin and citrus pectin. Therefore, the aim of this work was to test and compare the physicochemical properties of these compounds. The curves of FT-IR, NMR, ESI-MS, and thermogravimetric analysis (TGA) of pectin samples were measured and discussed. The analysis of the spectroscopic results confirms that the isolated pectins using various enzymes (xylanase and cellulase) have a structure similar to the commercially available pectin (PectaSol-C), with a noticeable change in morphology. These characteristics are helpful for further basic research and application.

Valorization of sugar beet pulp to value-added products: A review

The processing of sugar beet in the sugar production industry releases huge amounts of sugar beet pulp as waste which can be considered a valuable by-product as a source of cellulose, hemicellulose, and pectin. Valorization of sugar beet pulp into value added products occurs through acid hydrolysis, hydrothermal techniques, and enzymatic hydrolysis. Biochemical conversion of beet pulp into simple fermentable sugars for producing value added products occurs through enzymatic hydrolysis is a cost effective and eco-friendly process. While beet pulp has predominantly been used as a fodder for livestock, recent developments in its biotechnological valorization have unlocked its value as a feedstock in the production of biofuels, biohydrogen, biodegradable plastics, and platform chemicals such as lactic acid, citric acid, alcohols, microbial enzymes, single cell proteins, and pectic oligosaccharides. This review brings forward recent biotechnological developments made in the valorization of sugar beet pulp into valuable products.

Strategies to Increase the Biological and Biotechnological Value of Polysaccharides from Agricultural Waste for Application in Healthy Nutrition

Nowadays, there is a growing interest in the extraction and identification of new high added-value compounds from the agro-food industry that will valorize the great amount of by-products generated. Many of these bioactive compounds have shown beneficial effects for humans in terms of disease prevention, but they are also of great interest in the food industry due to their effect of extending the shelf life of foods by their well-known antioxidant and antimicrobial activity. For this reason, an additional research objective is to establish the best conditions for obtaining these compounds from complex by-product structures without altering their activity or even increasing it. This review highlights recent work on the identification and characterization of bioactive compounds from vegetable by-products, their functional activity, new methodologies for the extraction of bioactive compounds from vegetables, possibly increasing their biological activity, and the future of the global functional food and nutraceuticals market.

Ferulated Pectins and Ferulated Arabinoxylans Mixed Gel for Saccharomyces boulardii Entrapment in Electrosprayed Microbeads

Ferulated polysaccharides such as pectin and arabinoxylan form covalent gels which are attractive for drug delivery or cell immobilization. Saccharomyces boulardii is a probiotic yeast known for providing humans with health benefits; however, its application is limited by viability loss under environmental stress. In this study, ferulated pectin from sugar beet solid waste (SBWP) and ferulated arabinoxylan from maize bioethanol waste (AX) were used to form a covalent mixed gel, which was in turn used to entrap S. boulardii (2.08 × 10⁸ cells/mL) in microbeads using electrospray. SBWP presented a low degree of esterification (30%), which allowed gelation through Ca²⁺, making it possible to reduce microbead aggregation and coalescence by curing the particles in a 2% CaCl₂ cross-linking solution. SBWP/AX and SBWP/AX+ S. boulardii microbeads presented a diameter of 214 and 344 µm, respectively, and a covalent cross-linking content (dimers di-FA and trimer tri-FA of ferulic acid) of 1.15 mg/g polysaccharide. The 8-5′, 8-O-4′and 5-5′di-FA isomers proportions were 79%, 18%, and 3%, respectively. Confocal laser scanning microscopy images of propidium iodide-stained yeasts confirmed cell viability before and after microbeads preparation by electrospray. SBWP/AX capability to entrap S. boulardii would represent an alternative for probiotic immobilization in tailored biomaterials and an opportunity for sustainable waste upcycling to value-added products.

Beet pulp dietary fiber exposed to an extremely low-frequency electromagnetic field: detoxification properties

Introduction. The lack of dietary fibre in the Russian people diet contributes to the development of various diseases. In this regard, it seems worthwhile to enrich foods with dietary fibre obtained from various types of raw materials. In our experiments, we used beet pulp. This study aimed to develop a technology for obtaining combined dietary fibre using the electrophysical method and evaluate its detoxification properties. Study objects and methods. Study objects were pectin substances and combined detoxicants from beet pulp obtained by extracting with succinic acid with and without an extremely low-frequency electromagnetic field (ELF EM) treatment. The profiles of combined detoxicants and pectin substances were identified by IR-Fourier spectrometry. Beet pectin, beet cellulose, and their combined detoxicants were tested for complexing (binding) capacity with respect to lead ions (Pb2+). For this, we applied the trilonometric method with some modifications. Results and discussion. The analysis of the absorption bands of carboxyl groups carbonyls revealed the presence of free carboxyl groups in the combined detoxicants. The combined detoxicant with a 1:0.5 ratio of cellulose and pectin substances showed a high complexing (binding) capacity (601 mg/Pb2+) with respect to lead ions (Pb2+). Conclusion. We developed a technology for producing combined detoxicants with a high complexing capacity with respect to lead ions analysed microstructures of gels obtained during the interaction between the combined detoxicant and lead acetate solution.

The Potential of High Voltage Discharges for Green Solvent Extraction of Bioactive Compounds and Aromas from Rosemary (Rosmarinus officinalis L.)-Computational Simulation and Experimental Methods

Rosemary (Rosmarinus officinalis L.) is a Mediterranean medicinal and aromatic plant widely used due to valuable bioactive compounds (BACs) and aromas. The aim of the study was to evaluate the extraction of intracellular compounds from rosemary combining experimental procedure by means of high voltage electrical discharge (HVED), with a theoretical approach using two computational simulation methods: conductor-like screening model for real solvents and Hansen solubility parameters. The optimal HVED parameters were as follows: frequency 100 Hz, pulse width 400 ns, gap between electrodes 15 mm, liquid to solid ratio 50 mL/g, voltage 15 and 20 kV for argon, and 20 and 25 kV for nitrogen gas. Green solvents were used, water and ethanol (25% and 50%). The comparison was done with modified conventional extraction (CE) extracted by magnetic stirring and physicochemical analyses of obtained extracts were done. Results showed that HVED extracts in average 2.13-times higher total phenol content compared to CE. Furthermore, nitrogen, longer treatment time and higher voltage enhanced higher yields in HVED extraction. HVED was confirmed to have a high potential for extraction of BACs from rosemary. The computational stimulation methods were confirmed by experimental study, ethanol had higher potential of solubility of BACs and aromas from rosemary compared to water.

Difficulties with Use of Cocoa Bean Shell in Food Production and High Voltage Electrical Discharge as a Possible Solution

The cocoa and chocolate industries have huge problems with the utilization of waste generated during the production process. Waste material generated during production include cocoa pod husk, pulp, and cocoa bean shell. Cocoa shell is a by-product that has great potential because of its composition. It consists of dietary fibers, proteins, polyphenols, methylxanthines, etc. However, despite its favorable composition, cocoa shell often cannot be used directly in food production because it may contain components that are harmful for human health. Cocoa shell can carry mycotoxins, different microorganisms, polycyclic aromatic hydrocarbons, and heavy metals. High voltage electrical discharge presents a novel non-thermal method that has great potential for the decontamination of waste materials and can also be used for extraction of valuable compounds from cocoa shell.

Phenolic and Antioxidant Analysis of Olive Leaves Extracts (Olea europaea L.) Obtained by High Voltage Electrical Discharges (HVED)

Background: The aim of this study was to evaluate high voltage electrical discharges (HVED) as a green technology, in order to establish the effectiveness of phenolic extraction from olive leaves against conventional extraction (CE). HVED parameters included different green solvents (water, ethanol), treatment times (3 and 9 min), gases (nitrogen, argon), and voltages (15, 20, 25 kV). Methods: Phenolic compounds were characterized by ultra-performance liquid chromatography-tandem mass spectrometer (UPLC-MS/MS), while antioxidant potency (total phenolic content and antioxidant capacity) were monitored spectrophotometrically. Data for Near infrared spectroscopy (NIR) spectroscopy, colorimetry, zeta potential, particle size, and conductivity were also reported. Results: The highest yield of phenolic compounds was obtained for the sample treated with argon/9 min/20 kV/50% (3.2 times higher as compared to CE). Obtained results suggested the usage of HVED technology in simultaneous extraction and nanoformulation, and production of stable emulsion systems. Antioxidant capacity (AOC) of obtained extracts showed no significant difference upon the HVED treatment. Conclusions: Ethanol with HVED destroys the linkage between phenolic compounds and components of the plant material to which they are bound. All extracts were compliant with legal requirements regarding content of contaminants, pesticide residues and toxic metals. In conclusion, HVED presents an excellent potential for phenolic compounds extraction for further use in functional food manufacturing.

Pectin and Neutral Monosaccharides Production during the Simultaneous Hydrothermal Extraction of Waste Biomass from Refining of Sugar-Optimization with the Use of Doehlert Design

We propose a one-stage hydrothermal extraction of sugar beet pulp leading to effective co-production of pectin and neutral monosaccharides with a relatively high yield and satisfactory purity without the presence of an acidic catalyst. The optimal experimental design methodology was used for modelling and optimizing the yield of pectin and neutral monosaccharides. In good agreement with experimental results (R² = 0.955), the model predicts an optimal yield of pectin (approx. 121.1 g kg⁻¹ ± 0.47 g kg⁻¹) at a temperature and time of about 118.1 °C and 21.5 min, respectively. The highest yield of the sum of neutral monosaccharides (approx. 82.6 g kg⁻¹ ± 0.72 g kg⁻¹) was obtained at about 116.2 °C and 26.4 min (R² = 0.976). The obtained results are suitable for industrial upscaling and may provide an incentive to implement a new, environmentally friendly, simple, and effective method for treating waste product from the sugar refining industry, which has proved onerous until now.

Extraction of bioactive compounds and essential oils from mediterranean herbs by conventional and green innovative techniques: A review

Market interest in aromatic plants from the Mediterranean is continuously growing mainly due to their medicinal and bioactive compounds (BACs) with other valuable constituents from essential oils (EOs). From ancient times, these plants have been important condiments for traditional Mediterranean cuisine and remedies in folk medicine. Nowadays, they are considered as important factors for food quality and safety, due to prevention of various deteriorative factors like oxidations and microbial spoilage. EOs have different therapeutic benefits (e.g. antioxidant, anti-inflammatory, antimicrobial, and antifungal), while BACs mostly affect nutritive, chemical, microbiological, and sensory quality of foods. Currently, many plant extracts are used for functional (healthy) foods, which additionally fuels consumer and industrial interest in sustainable and non-toxic routes for their production. EO yields from dried plants are below 5%. Their extraction is strongly dependent on the hydrophobic or lipophilic character of target molecules, hence the common use of organic solvents. Similarly, BACs encompass a wide range of substances with varying structures as reflected by their different physical/chemical qualities. Thus, there is a need to identify optimal non-toxic extraction method(s) for isolation/separation of EO/BCs from plants. Various innovative non-thermal extractions (e.g. ultrasound-, high-pressure-, pulsed electric fields assisted extraction, etc.) have been proposed to overcome the above mentioned limitations. These techniques are "green" in concept, as they are shorter, avoid toxic chemicals, and are able to improve extract yields and quality with reduced consumption of energy and solvents. This research provides an overview of such extractions of both BAC and EOs from Mediterranean herbs, sustained by innovative and non-conventional energy sources.

Electric field-based technologies for valorization of bioresources

This review provides an overview of recent research on electrotechnologies applied to the valorization of bioresources. Following a comprehensive summary of the current status of the application of well-known electric-based processing technologies, such as pulsed electric fields (PEF) and high voltage electrical discharges (HVED), the application of moderate electric fields (MEF) as an extraction or valorization technology will be considered in detail. MEF, known by its improved energy efficiency and claimed electroporation effects (allowing enhanced extraction yields), may also originate high heating rates - ohmic heating (OH) effect - allowing thermal stabilization of waste stream for other added-value applications. MEF is a simple technology that mostly makes use of green solvents (mainly water) and that can be used on functionalization of compounds of biological origin broadening their application range. The substantial increase of MEF-based plants installed in industries worldwide suggests its straightforward application for waste recovery.