Microfibrillated cellulose from the peel of prickly pear fruits

Recent developments in sugarcane bagasse fibre-based adsorbent and their potential industrial applications: A review

In recent years, there has been an increase in research devoted to the advancement of cellulose and nanocellulose-based materials, which are advantageous due to their renewable nature, strength, rigidity, and environmental friendliness. This exploration complies with the fundamental tenets of environmental stewardship and sustainability. An area of industrial biotechnology where cellulosic agricultural residues have the potential to be economically utilized is through the conversion of such residues; sugarcane bagasse is currently leading this charge. SCB, a plentiful fibrous byproduct produced during the sugarcane industry's operations, has historically been utilized in various sectors, including producing paper, animal feed, enzymes, biofuel conversion, and biomedical applications. Significantly, SCB comprises a considerable amount of cellulose, approximately 40 % to 50 %, rendering it a valuable source of cellulose fibre for fabricating cellulose nanocrystals. This review sheds light on the significant advances in surface modification techniques, encompassing physical, chemical, and biological treatments, that enhance sugarcane bagasse fibres' adsorption capacity and selectivity. Furthermore, the paper investigates the specific advancements related to the augmentation of sugarcane bagasse fibres' efficacy in adsorbing a wide range of pollutants. These pollutants span a spectrum that includes heavy metals, dyes, organic pollutants, and emerging contaminants. The discussion provides a comprehensive overview of the targeted removal processes facilitated by applying modified fibres. The unique structural and chemical properties inherent in sugarcane bagasse fibres and their widespread availability position them as highly suitable adsorbents for various pollutants. This convergence of attributes underscores the potential of sugarcane bagasse fibres in addressing environmental challenges and promoting sustainable solutions across multiple industries.

Development of Plum Seed-Derived Carboxymethylcellulose Bioink for 3D Bioprinting

Three-dimensional bioprinting represents an innovative platform for fabricating intricate, three-dimensional (3D) tissue structures that closely resemble natural tissues. The development of hybrid bioinks is an actionable strategy for integrating desirable characteristics of components. In this study, cellulose recovered from plum seed was processed to synthesize carboxymethyl cellulose (CMC) for 3D bioprinting. The plum seeds were initially subjected to α-cellulose recovery, followed by the synthesis and characterization of plum seed-derived carboxymethyl cellulose (PCMC). Then, hybrid bioinks composed of PCMC and sodium alginate were fabricated, and their suitability for extrusion-based bioprinting was explored. The PCMC bioinks exhibit a remarkable shear-thinning property, enabling effortless extrusion through the nozzle and maintaining excellent initial shape fidelity. This bioink was then used to print muscle-mimetic 3D structures containing C2C12 cells. Subsequently, the cytotoxicity of PCMC was evaluated at different concentrations to determine the maximum acceptable concentration. As a result, cytotoxicity was not observed in hydrogels containing a suitable concentration of PCMC. Cell viability was also evaluated after printing PCMC-containing bioinks, and it was observed that the bioprinting process caused minimal damage to the cells. This suggests that PCMC/alginate hybrid bioink can be used as a very attractive material for bioprinting applications.

Nano/micro-cellulose-based materials as remarkable sorbents for the remediation of agricultural resources from chemical pollutants

Overusing pesticides, fertilizers, and synthetic dyes has significantly increased their presence in various parts of the environment. The transportation of these pollutants into agricultural soil and water through rivers, soils, and groundwater has seriously threatened human and ecosystem health. Applying techniques and materials to clean up agricultural sources from pesticides, heavy metals (HMs), and synthetic dyes (SDs) is one of the major challenges in this century. The sorption technique offers a viable solution to remediate these chemical pollutants (CHPs). Cellulose-based materials have become popular in nano and micro scales because they are widely available, safe to use, biodegradable, and have a significant ability to absorb substances. Nanoscale cellulose-based materials exhibit greater capacity in absorbing pollutants compared to their microscale counterparts because they possess a larger surface area. Many available hydroxyl groups (-OH) and chemical and physical modifications enable the incorporation of CHPs on to cellulose-based materials. Following this potential, this review aims to comprehensively summarize recent advancements in the field of nano- and micro-cellulose-based materials as effective adsorbents for CHPs, given the abundance of cellulosic waste materials from agricultural residues. The recent developments pertaining to the enhancement of the sorption capacity of cellulose-based materials against pesticides, HMs, and SDs, are deliberated.

Harnessing Nature's Ingenuity: A Comprehensive Exploration of Nanocellulose from Production to Cutting-Edge Applications in Engineering and Sciences

Primary material supply is the heart of engineering and sciences. The depletion of natural resources and an increase in the human population by a billion in 13 to 15 years pose a critical concern regarding the sustainability of these materials; therefore, functionalizing renewable materials, such as nanocellulose, by possibly exploiting their properties for various practical applications, has been undertaken worldwide. Nanocellulose has emerged as a dominant green natural material with attractive and tailorable physicochemical properties, is renewable and sustainable, and shows biocompatibility and tunable surface properties. Nanocellulose is derived from cellulose, the most abundant polymer in nature with the remarkable properties of nanomaterials. This article provides a comprehensive overview of the methods used for nanocellulose preparation, structure-property and structure-property correlations, and the application of nanocellulose and its nanocomposite materials. This article differentiates the classification of nanocellulose, provides a brief account of the production methods that have been developed for isolating nanocellulose, highlights a range of unique properties of nanocellulose that have been extracted from different kinds of experiments and studies, and elaborates on nanocellulose potential applications in various areas. The present review is anticipated to provide the readers with the progress and knowledge related to nanocellulose. Pushing the boundaries of nanocellulose further into cutting-edge applications will be of particular interest in the future, especially as cost-effective commercial sources of nanocellulose continue to emerge.

Opportunities for Ivory Nut Residue Valorization as a Source of Nanocellulose Colloidal Suspensions

Ivory nut seeds have been traditionally exploited in Central and South America for obtaining vegetable ivory. The residues from this industry are susceptible to valorization as a source of fatty acids (by organic extraction) and mannans (by alkaline dissolution and regeneration). Nonetheless, cellulose may also be recovered at the end of this fractionation process by acid hydrolysis and functionalization, with associated advantages over other lignocellulosic sources due to the absence of lignin in the endospermic tissue. In this work, various experimental parameters (sulfuric acid concentration, temperature, and hydrolysis time) were investigated to optimize the processing conditions for preparing stable nanocellulose suspensions after ultrasonication. The most stable nanocellulose gel (1 wt% solid content) was obtained after 4-h hydrolysis at 60 °C with 8 M H2SO4 and was characterized by using complementary tech-niques, including dynamic light scattering (DLS), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), nano-fibril sulfation measurements, vibrational and solid-state nuclear magnetic resonance (CP/MAS 13C-NMR) spectroscopies, and thermal analysis. This nanocellulose hydrogel is susceptible to further utilization in various applications and fields, e.g., in agricul-ture for controlling the release of agrochemicals, in pharmaceutics for developing new dosage forms, and in the treatment of wastewater from the textile and paper industries.

Applications and Pharmacological Properties of Cactus Pear (Opuntia spp.) Peel: A Review

Nowadays, there is a growing interest in the exploitation of by-products from fruits and vegetables, generated from industrial processing or human feeding. Residues of popularly consumed fruits such as orange, lemon, banana, pomegranate, among others, have been widely described and studied; however, cactus pear (Opuntia spp.) residues, as a locally consumed product, have been forgotten. The whole fruit can be divided into the edible portion (pulp) and the non-edible portion (seeds and peel). Several studies mainly focus on the characteristics of the edible portion or in the whole fruit, ignoring by-products such as peels, which are rich in compounds such as phenols, flavonoids and dietary fiber; they have also been proposed as an alternative source of lipids, carbohydrates and natural colorants. Some uses of the peel have been reported as a food additives, food supplements, as a source of pectins and for wastewater treatment; however, there have not been any deep investigations of the characteristics and potential uses of the cactus pear peel (CPP). The aim of the present paper is to provide an overview of the current research on CPP. CPP has many bio-active compounds that may provide health benefits and may also be useful in pharmaceutical, food and manufacturing industries; however, greater research is needed in order to gain thorough knowledge of the possibilities of this by-product.

Cellulose in Secondary Xylem of Cactaceae: Crystalline Composition and Anatomical Distribution

Cellulose is the main polymer that gives strength to the cell wall and is located in the primary and secondary cell walls of plants. In Cactaceae, there are no studies on the composition of cellulose. The objective of this work was to analyze the crystallinity composition and anatomical distribution of cellulose in Cactaceae vascular tissue. Twenty-five species of Cactaceae were collected, dried, and milled. Cellulose was purified and analyzed with Fourier transform infrared spectroscopy, the crystallinity indexes were calculated, and statistical analyzes were performed. Stem sections were fixed, cut, and stained with safranin O/fast green, for observation with epifluorescence microscopy. The crystalline cellulose ratios had statistical differences between Echinocereus pectinatus and Coryphantha pallida. All cacti species presented a higher proportion of crystalline cellulose. The fluorescence emission of the cellulose was red in color and distributed in the primary wall of non-fibrous species; while in the fibrous species, the distribution was in the pits. The high percentages of crystalline cellulose may be related to its distribution in the non-lignified parenchyma and primary walls of tracheary elements with helical or annular thickenings of non-fibrous species, possibly offering structural rigidity and forming part of the defense system against pathogens.

Mechanochemical Transformations of Biomass into Functional Materials

Biomass is one of the promising alternatives to petroleum-derived materials and plays a major role in our fight against climate change by providing renewable sources of chemicals and materials. Owing to its chemical and structural complexity, the transformation of biomass into value-added products requires a profound understanding of its composition at different scales and innovative methods such as combining physical and chemical processes. In this context, the use of mechanochemistry in biomass valorization is currently growing owing to its potentials as an efficient, sustainable, and environmentally friendly approach. This review highlights the latest advances in the transformation of biomass (i. e., chitin, cellulose, hemicellulose, lignin, and starch) to functional materials using mechanochemical-assisted methods. We focused here on the methodology of biomass processing, influencing factors, and resulting properties with an emphasis on achieving functional materials rather than breaking down the biopolymer chains into smaller molecules. Opportunities and limitations associated this methodology were discussed accordingly for future directions.

Cellulose and Its Nano-Derivatives as a Water-Repellent and Fire-Resistant Surface: A Review

The inevitable destructive effects of moisture and temperature are obvious in cellulosic and nanocellulosic substrates. These materials are the main foundations of interdependent industries that produce products such as currency notes or high-quality packaging for sanitary, cosmetics, or ammunition in the defense industry. Therefore, it is essential to develop procedures to eliminate problems arising from humidity and fire to improve the quality of these green and sustainable materials. The production of waterproof and flame-resistant cellulose-based substrates has drawn increasing attention to resolve these drawbacks. In this review paper, we have initially summarized the most accessible cellulosic substrates, different kinds of nanocellulose, and the general information about water repellents and intumescent fireproof surfaces. Then, the potential and necessity of using cellulosic biobased substrates are addressed for use in modified shapes as waterproof and fire inhibitor coatings. Cost-effective, eco-friendly, and durable, dual-function coatings are also introduced as future challenges, which are exploited as water-repellents and flame-retardant cellulose-based surfaces for pulp and paper applications.

Production and Surface Modification of Cellulose Bioproducts

Petroleum-based synthetic plastics play an important role in our life. As the detrimental health and environmental effects of synthetic plastics continue to increase, the renewable, degradable and recyclable properties of cellulose make subsequent products the "preferred environmentally friendly" alternatives, with a small carbon footprint. Despite the fact that the bioplastic industry is growing rapidly with many innovative discoveries, cellulose-based bioproducts in their natural state face challenges in replacing synthetic plastics. These challenges include scalability issues, high cost of production, and most importantly, limited functionality of cellulosic materials. However, in order for cellulosic materials to be able to compete with synthetic plastics, they must possess properties adequate for the end use and meet performance expectations. In this regard, surface modification of pre-made cellulosic materials preserves the chemical profile of cellulose, its mechanical properties, and biodegradability, while diversifying its possible applications. The review covers numerous techniques for surface functionalization of materials prepared from cellulose such as plasma treatment, surface grafting (including RDRP methods), and chemical vapor and atomic layer deposition techniques. The review also highlights purposeful development of new cellulosic architectures and their utilization, with a specific focus on cellulosic hydrogels, aerogels, beads, membranes, and nanomaterials. The judicious choice of material architecture combined with a specific surface functionalization method will allow us to take full advantage of the polymer's biocompatibility and biodegradability and improve existing and target novel applications of cellulose, such as proteins and antibodies immobilization, enantiomers separation, and composites preparation.

Removal of Cadmium and Chromium by Mixture of Silver Nanoparticles and Nano-Fibrillated Cellulose Isolated from Waste Peels of Citrus Sinensis

Nano-fibrillated cellulose (NFC) was extracted by a chemical method involving alkali and acid hydrolysis. The characterisation of the citrus sinensis fruit peel bran and nano-fibrillated cellulose was performed by XRD, FTIR, TEM, and FESEM. XRD confirmed the phase of NFC which showed monoclinic crystal with spherical to rod shape morphology with a size of 44-50 nm. The crystallinity index of treated NFC increased from 39% to 75%. FTIR showed the removal of lignin and hemicellulose from waste peels due to the alkaline treatment. Silver nanoparticles were also synthesised by utilizing extract of citrus sinensis skins as a reducing agent. Pharmaceutical effluent samples from an industrial area were tested by Atomic Absorption Spectrometry. Out of the four metals obtained, cadmium and chromium were remediated by silver nanoparticles with nano-fibrillated cellulose via simulated method in 100 mg/L metal-salt concentrations over a time period of 160 min. The highest removal efficiency was found for cadmium, i.e., 83%, by using silver and NFC together as adsorbents. The second highest was for chromium, i.e., 47%, but by using only NFC. The Langmuir and Freundlich isotherms were well fitted for the sorption of Cd (II) and Cr (II) with suitable high R2 values during kinetic simulation. Thus, the isolation of NFC and synthesis of silver nanoparticles proved efficient for heavy metal sorption by the reuse of waste skins.

Microfibrillated cellulose from Argania spinosa shells as sustainable solid particles for O/W Pickering emulsions

Microfibrillated cellulose (MFC) from Argan (Argania spinosa) shells was prepared by chemical purification of cellulose, then mechanical disintegration via high pressure homogenization was performed to isolate fibrils of cellulose. Chemical characterization of raw argan shell (AS-R), purified cellulose (AS-C), and argan shell MFC (AS-MFC) included FT-IR, XRD and NMR. Morphological characterization of AS-MFC was assessed using TEM. Next, the use of AS-MFC as oil-in-water (O/W) emulsions stabilizer was investigated. The particle concentration was observed to affect the long-term stability of the emulsions; high concentrations (0.5-1 % w/w) of AS-MFC resulted in emulsions that were thermodynamically stable during 15 days of storage, which was demonstrated by the droplet's size evolution. The suitable oil concentration for a maximum volume of emulsion using 1 % w/w AS-MFC was demonstrated. The results show that AS-MFC is able to stabilize 70 % w/w MCT oil without visual phase separation. Finally, CLSM shows the adsorption of AS-MFC at the oil-water interface and the formation of a 3D network surrounding oil droplets, confirming Pickering emulsion formation and stabilization.

Recent studies on modified cellulose/nanocellulose epoxy composites: A systematic review

Cellulose and its derivatives are widely explored for films and thickening of pharmaceutical solutions, in paints, as reinforcement in composites, among others. This versatility is due to advantages such as renewability, low cost, and environmental friendliness. When used in polymer composites, due to the hydrophilic character of the cellulose, surface chemical modification is highly recommended to improve its compatibility with the polymeric matrix. Hence, this paper presents a systematic review of chemically modified cellulose/epoxy resin composites focusing on the last five years. The investigation followed the PRISMA protocol that delivers a meticulous summary of all available primary research in response to a research question. After including/excluding steps, thirty-six studies were included in the review. The results were presented focusing on thermal, mechanical and dynamic-mechanical properties of the composites. In brief, this methodology helped identifying the main gaps in knowledge in that field.

Bio-Composites Consisting of Cellulose Nanofibers and Na+ Montmorillonite Clay: Morphology and Performance Property

This paper reports the usage of cellulose nanofibers (CNFs) as a continuous nanoporous matrix and nanoclay (NC) as additive to fabricate hybrid films. CNF/Cloisite Na+ nanoclay composite films containing 10-50 wt % of NC were prepared for the study. The effects of NC incorporation and its content on mechanical, wettability and thermal degradation properties were investigated. The results showed that the film had a multilayer structure with gradually deposited CNT-NC hybrid on the filter paper Pure CNF films had higher moduli compared with those from the composite films, as the incorporation of NC decreased hydrogen bonding and networking ability of CNFs, especially at the high NC loading levels. The composite films demonstrated self-extinguishing ability when being exposed to the open flame. Composites with over 35 wt % NC did not burn because of the formation of a protective barrier containing ordered NC platelets. The addition of montmorillonite NC led to increased surface water contact angle, showing enhanced hydrophobicity of the material. During the film's thermal pyrolysis, the first process occurred between 100 and 200 °C, resulting mainly from the evaporation of absorbed water; the second, between 280 and 350 °C, indicated thermal decomposition of cellulose; and the slow third stage happened from the 350 to 600 °C, representing carbonization. The results demonstrate that the apparent activation energies for all the CNF/NC composites were higher than the pure CNF film. CNF/NC films fabricated in this process are a promising barrier material for packaging applications.

Microcrystalline cellulose (MCC) based materials as emerging adsorbents for the removal of dyes and heavy metals - A review

In an attempt to overcome such threats posed by water pollution, various processes ranging from physical, chemical as well as biological were applied to get rid of wastewater pollutants. The simplicity, high efficiency and cheapness of an adsorption process make it the most widely used among various other processes. Adsorbents with different properties were used in the adsorption process but this paper was focused on reviewing various articles published by numerous researchers on the isolation of microcrystalline cellulose (MCC), a popular carbohydrate polymer from lignocellulosic biomass and utilization of MCC based materials as effective adsorbents for the successful removal of dyes and heavy metals from synthetic wastewater. The sudden interest on MCC and MCC-based materials as adsorbents cannot be separated from their excellent properties such as renewability, biodegradability, biocompatibility, economic value, non-toxicity, high mechanical properties and surface area. Upon comparison with established adsorbents reported from literature, MCC-based materials performed excellently well in the adsorption of dyes and heavy metals with Langmuir isotherm and pseudo-second order reported mostly as the best fit models for the generated equilibrium and kinetic data, respectively pointing at the distribution of adsorption sites to be homogeneous as well as the formation of monolayer adsorbate on their surfaces. The various thermodynamic studies reported further revealed the adsorption processes of both dyes and heavy metals onto MCC-based materials to be entropy driven processes, spontaneous, and endothermic. Finally, future research was suggested to focus on optimization to enhance the performance of the MCC-based adsorbents, carrying out the adsorption on real wastewater instead of synthetic ones as well as expanding the range of adsorbates to include other contaminants such as chlorophenols, herbicides, pesticides and others in addition to dyes and heavy metals.

Promising Physical, Physicochemical, and Biochemical Background Contained in Peels of Prickly Pear Fruit Growing under Hard Ecological Conditions in the Mediterranean Countries

Background

Prickly pear (Opuntia spp.), called Barbary fig, is a cultivated species springing from family Cactaceae. It is native to Mexico and has been naturalized in other continents, especially the Mediterranean countries (North Africa). The aim of the study was to investigate the physical, physicochemical, and biochemical criteria of peels of three Moroccan prickly pear varieties (Aakria, Derbana, and Mles) growing in the Rhamna regions (dry area).

Material and Methods

Both physicochemical characteristics (humidity, water activity, Brix, ash content, pH, and total titratable acidity) and biochemical characteristics (total carotenoid content, betalain content, total polyphenolic content, and ascorbic acid content) were were studied according to previously reported methods.

Results

Regarding the physiochemical criteria, the moisture of the fresh peels of studied varieties ranged from 81.59 ± 0.02 to 83.47 ± 0.02%. The water activity (aw) ranged from 0.862 ± 0.001 to 0.872 ± 0.001. The values of Brix varied from 14.69 ± 0.05° Bx to 15.80 ± 0.03° Bx. pH values varied from 5.13 ± 0.01 to 5.32. The total titratable acidity values ranged from 0.130 ± 0.008 to 0.196 ± 0.014 g of citric acid/100 g of FM (fresh matter). The ash content values ranged from 8.92 ± 0.10 to 11.04 ± 0.06 g/100 g of FM. Regarding the biochemical criteria, the total carotenoid content ranged from 2.29 ± 0.01 to 2.87 ± 0.01 μg/g of FM. The total betalain content ranged from 6213.46 ± 58.86 to 8487.19 ± 51.71 μg/100 g of FM. The total polyphenolic content varied from 160 ± 3.55 to 243.79 ± 5.55 mg GA E/100 g of FM. The ascorbic content ranged from 58.21 ± 0.24 to 74.72 ± 0.17 mg/100 g of FM.

Conclusion

The findings of physicochemical and biochemical criteria of the investigated varieties growing in Moroccan drylands showed promising results in terms of studied parameters.

Preparation of Nanocellulose Aerogel from the Poplar (Populus tomentosa) Catkin Fiber

: The effects of chemical pretreatment on the purification of poplar (Populus tomentosa) catkin fiber and the effect of ultrasonic time for the microfibrillarization of poplar catkin fiber (PCF) were studied. The nanocellulose aerogels were prepared by freeze drying the cellulose solutions. The density, porosity, micro morphology, thermal stability and mechanical properties of the aerogels were analyzed. It was found that the dewaxing time of PCF is shorter than that of unsonicated nanocellulose. After the treatment of 0.5 wt% sodium chlorite for 2 h, the lignin of PCF was removed. After the chemical purification, the PCF was treated with 2 and 5 wt% NaOH solution and ultrasonicated for 5 and 10 min, respectively. When the ultrasonic time was 10 min, the diameter of the nanocellulose was 20-25 nm. When the ultrasonic time was 5 min, the aerogels with porous honeycomb structure can be prepared by using the nanocellulose sol of PCF as raw material. The density of the aerogels was only 0.3-0.4 mg/cm3 and the porosities of the aerogels were all larger than 99%. The difference between the pyrolysis temperature of aerogels was small, the elastic modulus of aerogels was 30–52 kPa, and the compressive strength was 22–27 kPa. With the increase of the concentration of NaOH solution (5 wt%) and ultrasonic time (10 min), the elastic modulus of aerogels increased gradually and reached the maximum value of 52 kPa, while the compressive strength reached the maximum value of 27 kPa when the PCF being treated in 5 wt% NaOH solution and was ultrasonicated for 5 min.

Sugar palm nanofibrillated cellulose (Arenga pinnata (Wurmb.) Merr): Effect of cycles on their yield, physic-chemical, morphological and thermal behavior

Nanofibrillated cellulose (NFCs) were extracted from sugar palm fibres (SPS) in two separate stages; delignification and mercerization to remove lignin and hemicellulose, respectively. Subsequently, the obtained cellulose fibres were then mechanically extracted into nanofibres using high pressurized homogenization (HPH). The diameter distribution sizes of the isolated nanofibres were dependent on the cycle number of HPH treatment. TEM micro-images displayed the decreasing trend of NFCs diameter, from 21.37 to 5.5 nm when the number of cycle HPH was increased from 5 to 15 cycles, meanwhile TGA and XRD analysis showed that the degradation temperature and crystallinity of the NFCs were slightly increased from 347 to 347.3 °C and 75.38 to 81.19% respectively, when the number of cycles increased. Others analysis also were carried on such as FT-IR, FESEM, AFM, physical properties, zeta potential and yield analysis. The isolated NFCs may be potentially applied in various application, such as tissue engineering scaffolds, bio-nanocomposites, filtration media, bio-packaging and etc.

Management of citrus waste by switching in the production of nanocellulose

Citrus fruit processing industries produce a vast quantity of waste materials as peel and pulp that are not handled properly. In present study, waste generated from citrus has been used for extraction of cellulose and nanocellulose. The aggregated cellulose, derived after alkaline treatment, was acid hydrolysed; resulted in reduction of the size of cellulose fibre. The cellulose showed amorphous structure revealed by X-ray diffraction analysis. Scanning electron microscopy analysis explained densely packed structure of nanocellulose. High magnification revealed break points in cellulose fibre due to acidic treatment; looked like carbon nanotubes. The simple solubility test demonstrated that different solvents had different effects on the dissolution of nanocellulose. The study reveals that citrus peel is also a good candidate of cellulose that can be utilised for different applications.

Characterization of Nanofibrillated Cellulose Produced by Different Methods from Cabbage Outer Leaves

The potential use of cabbage outer leaves as a starting material for the production of nanofibrillated cellulose (NFC) was investigated. Chemical-free pretreatment methods, namely, autoclaving, ultrasonication (US), and high-shear homogenization (HS), were applied to remove noncellulosic components from cabbage cell walls prior to defibrillation, which was conducted by subjecting a pretreated sample to HS and then high-pressure homogenization. The sample undergone autoclaving at 130 °C for 2 hr was noted to contain a significantly higher cellulose content (36.5% dry mass) compared with the fresh leaves (12.48% dry mass). This led to an increase in the crystallinity index (CI) of the autoclaved cabbages from 30.8% to 50.7%. Further increase in the cellulose content (47.0% to 49.2% dry mass) was observed when subjecting the autoclaved sample to either US at 37 kHz for 1 hr, HS at 3800 × g for 15 min or HS followed by US at the aforementioned conditions. After pretreatment and defibrilllation, a suspension of NFC with the diameters of 4 to 50 nm was obtained, with the CI of 59.1% to 66.7%. Such a suspension exhibited a gel-like behavior with tan δ in the range of 0.12 to 0.13; the suspension exhibited a similar behavior to that prepared by the conventional chemical pretreatment method.

PRACTICAL APPLICATION

NFC could be produced from cabbage outer leaves, which are an abundantly available by-product of a vegetable processing plant, via the combined hydrothermal and mechanical pretreatment without the use of any chemicals. This chemical-free preparation process is highly desirable as it leaves no residues in the product and causes no chemical waste that needs to be treated. Cabbage-based NFC also exhibits similar characteristics to that prepared via a chemically treated route.

Production of nanofibrillated cellulose with superior water redispersibility from lime residues via a chemical-free process

Water removal during drying of nanofibrillated cellulose (NFC) generally results in the formation of hydrogen bonds between fibers, leading to irreversible fiber agglomeration and hence their poor water redispersibility. The feasibility of using lime residues after juice extraction to produce dried NFC possessing superior redispersibility was here investigated. After autoclaving at 110-130 °C for 2 h, high-shear homogenization at 3800 × g for 15 min and high-pressure homogenization at 40 MPa for 5 passes, NFC having the diameters of 5-28 nm and crystallinity index of 44-46% could be obtained. After hot air drying at 60 °C, dried NFC could be well dispersed in water, with viscoelastic property similar to that of the originally prepared NFC suspension. Pectin associated with cellulose nanofibrils helped prevent fiber aggregation during drying and hence facilitating nanofiber redispersion in water. This observed trend was opposite to that belonging to fiber undergone chemical treatments to remove non-cellulosic constituents.

Valorization of Agricultural Residues for Cellulose Nanofibrils Production and Their Use in Nanocomposite Manufacturing

This paper reports the isolation of cellulose nanofibrils (CNFs) from almond stems, available as agricultural residues. The CNF suspensions were prepared by the combination of chemical and mechanical treatment: the microscopic fibres were firstly isolated by the delignification-bleaching process, followed by TEMPO-mediated oxidation to facilitate the further nanofibrillation using high-pressure homogenization process at 600 bar for 10 passes as a mechanical treatment. The ensuing CNFs were characterized by several methods, such as transmission electron microscopy (TEM), degree of fibrillation, and carboxyl content. Different nanocomposites were prepared by casting-evaporation method from the mixture of CNF suspension in the commercial acrylic latex as a matrix. The effect of CNF loading on mechanical and thermal properties of the composites was then studied. The considerable enhancement of both Young’s modulus and tensile strength was observed, which clearly indicates that the nanocomposites reinforced with the nanofibrils from Prunus amygdalus have promising mechanical properties.

Microencapsulation of betalains obtained from cactus fruit (Opuntia ficus-indica) by spray drying using cactus cladode mucilage and maltodextrin as encapsulating agents

The microencapsulation of betalains from cactus fruit by spray drying was evaluated as a stabilization strategy for these pigments. The betalains used as active agent were extracted from purple fruits of Opuntia ficus-indica (BE) and encapsulated with maltodextrin and cladode mucilage MD-CM and only with MD. The microcapsulates were characterized by scanning electron microscopy (SEM), thermal analysis (TGA-DSC), tristimulus colorimetry, as well as, their humidity, water activity and dietary fiber content were also determined. The active agent content was measured by UV-Vis spectrophotometry and its composition confirmed by HPLC-ESIMS. A pigment storage stability test was performed at 18 °C and different relative humidities. The addition of CM in the formulation increased the encapsulation efficiency, diminished the moisture content, and allowed to obtain more uniform size and spherical particles, with high dietary fiber content. These microencapsulates are promising functional additive to be used as natural colorant in the food industry.

Ultrasonic treatment of α-chitin regenerated from a NaOH/urea solvent with tunable capacity for stabilization of oil in water emulsion

α-chitin cannot be dispersed directly with ultrasonic treatment because of the strong intermolecular forces.

Easily deconstructed, high aspect ratio cellulose nanofibres from Triodia pungens; an abundant grass of Australia's arid zone

The production of high aspect ratio cellulose nanofibres without resorting to very harsh mechanical and/or chemical processing steps remains a challenge that hinders progress in the fast-moving nanocellulose field.