Antioxidant activity of barley as affected by extrusion cooking

Extrusion of plant proteins: A review of lipid and protein oxidation and their impact on functional properties

Extrusion processing can improve the functional and nutritional value of plant proteins, making them a sustainable source for various applications. During both low- and high-moisture extrusion, raw materials are subjected to harsh process conditions, leading to lipid and protein oxidation. In general, oxidation products are associated with adverse effects on product properties and human health. The oxidation rates are influenced by a number of factors, including temperature, water, oil content, and protein source, with lipid-protein interactions playing a significant role in oxidation dynamics and measurement accuracy. Higher extrusion temperatures and water content promote oxidation, yet are also necessary for fiber formation. Mild protein oxidation can improve functional properties and digestibility, while extensive oxidation tends to reduce both. Therefore, adjusting extrusion parameters is critical for controlling oxidation. In addition, natural antioxidants may reduce oxidation during extrusion, but their impact on functional properties requires further investigation.

High moisture extrusion induced interaction of Tartary buckwheat protein and starch mitigating the in vitro starch digestion

This study investigated the effects of adding 4-20 % Tartary buckwheat protein (TBP, with a purity of 93.35 %) on the structural, thermal, and digestive properties of Tartary buckwheat starch (TBS) by high moisture (60 %) extrusion. The added TBP embedded and enwrapped the starch matrix, which formed protein-starch complexes. After adding 4 %-20 % TBP, the shear degradation of AP decreased. Conversely, the shear degradation of AM chains increased. The addition of TBP promoted the retrogradation of starch in extrudates, enhancing their short- and long-range ordered structures. Compared with extruded TBS, extrudates contained TBP showed a reduction of gelatinization enthalpy, a high content of resistant starch, and a lower starch digestibility. These findings provided an insight into the protein-starch interactions under high moisture extrusion, which would promote the advancement of starch-based foods with high TBP content.

Effects of different processing methods on phenolic compounds in flaxseed meal

This study examined effects of different processing methods on phenolic compounds in flaxseed meal. The optimal SE treatment was 1.0 MPa for 3 min, and the contents of total flavonoids and phenolic acid were 2.26 times and 1.63 times of the control group, respectively. Notably, erucic acid increased 85.76 %. Optimal extrusion conditions (15 % moisture content, 140 °C, 29 hz) led to the presence of rutin and a 2.81 times increase in protocatechuic acid content over the control. Fermenting with 3 % Bacillus subtilis for 4 days yielded gallic acid in bound form and vanillic acid in free form, with protocatechuic acid increasing 40.65 % compared to the control. Among all the treatments, extrusion produced the highest levels of phenolic compounds in flaxseed meal. Each treatment significantly increased the open ring isomer ester phenol (SDG) compared to the control. Overall, various processing methods impacted the phenolic content and composition in flaxseed meal differently.

Effect of extrusion using plasma-activated water on the structural, physicochemical, antioxidant and in vitro digestive properties of yam flour

The synergistic effects of plasma-activated water (PAW) and twin-screw extrusion (TSE) on the structural, physicochemical, antioxidant, and digestive properties of yam flour (YF) were studied. Compared to common TSE, PAW-TSE reduced the protein, starch, and polyphenol contents, swelling power, and gel property of YF, while PAW-TSE enhanced the flavonoid content, whiteness index, solubility, and antioxidant property of YF. Moreover, the results of structural characterization and differential scanning calorimetry indicated that the long-range or short-range ordering, and gelatinization enthalpy of starch in YF were reduced after PAW-TSE, while the structure ordering of proteins in YF increased. Furthermore, the in vitro digestibility results demonstrated a reduction in the rate of enzymatic hydrolysis, coupled with an increase in total contents of slowly digestible and resistant starch after PAW-TSE. It should be noted that TSE using PAW prepared by a longer plasma treatment resulted in a more significant improvement effect on YF.

Flaking of millets and its impact on bioactivity, pasting, digestibility, structural and thermal properties

Five different millets (foxtail, little, barnyard, kodo and browntop) with and without sprouting were subjected to flaking. Phytic acid and phenolic content tends to decrease significantly, whereas antioxidant activity increased up to 77.32% on flaking of millets. A significant decrease in peak and final viscosity was observed in millet flakes. A-type diffraction pattern was predominant for unsprouted millets whereas the flaked millets showed V-type crystallinity. The protein digestibility significantly increased up to 37.77% in flakes made from sprouted millets. The mineral bioavailability upon flaking of millets increased, especially Ca (88.22% for little), Fe (43.04% for barnyard) and Zn (61.77% for kodo), which is attributed to the reduction in phytic acid. Flaking, however, led to an increase in rapidly and slowly digestible starch with a corresponding decrease in resistant starch. Among the unsprouted and sprouted millet flakes, foxtail received the highest sensory scores for overall acceptability.

Valorisation of apple pomace for the development of high-fibre and polyphenol-rich wheat flour cookies

Apple pomace, abundant in dietary fibre and polyphenols, often goes unutilized, contributing to environmental pollution as it is discarded in open fields of Jammu and Kashmir. This study aimed to develop functional cookies fortified with apple pomace powder (APP), an industrial by-product. Wheat flour-APP formulations (0%, 5%, 10%, and 15%) were assessed. APP addition notably affected color values and functional properties, enhancing water and oil absorption capacities, swelling power, foam capacity and stability. Phenolic content increased significantly (p < 0.05) post-fortification, elevating antioxidant properties. FT-IR spectroscopy identified distinctive chemical components in wheat flour and APP. Sensory evaluation favored cookies with 10% APP, indicating their potential for consumer acceptance. Thus, APP shows promise for producing innovative functional cookies, improving consumer health, utilizing industrial by-products, and reducing waste from apple processing plants, thereby mitigating environmental pollution.

Effect of 3D printing and traditional molding on phenolic compounds and antioxidant activity in steamed bread

The production process of fermented black wheat steamed bread is closely related to the overall quality and nutritional content. In this study, we investigated the accuracy, product texture profile and antioxidant activity of fermented black wheat steamed bread samples produced by piston and spiral three-dimensional (3D) printers. The steaming process generally increased the total phenolic content and flavonoid content of the samples. The spiral 3D printer obtained samples with higher accuracy, total phenolic content up to 1960.43 Mg GAE/kg, and higher cellular antioxidant activity (CAA) content. The samples printed by the piston 3D printer showed higher total flavonoid content (575.75 Mg QE/kg), 2, 2'-azobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) values and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) values. This study shows that antioxidant-rich health foods can be prepared using 3D printed black wheat flour. The choice of 3D printing method affects the overall quality and nutritional content of the final product.

Effects of fatty acids and glycerides on the structure, cooking quality, and in vitro starch digestibility of extruded buckwheat noodles

This study aimed to explore the effects of various lipids on the structure, cooking quality, and in vitro starch digestibility of extruded buckwheat noodles (EBNs) with and without 20% high-amylose corn starch (HACS). Fourier transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction revealed that lauric acid bound more strongly to starch than did stearic acid and oleic acid, and the binding capacity of fatty acids with starch was stronger than that of glycerides. The presence of HACS during extrusion facilitated increased formation of starch-lipid complexes. Evaluations of cooking quality and digestion characteristics showed that EBNs containing 20% HACS and 0.5% glycerol monooleate demonstrated the lowest cooking loss (7.28%), and that with 20% HACS and 0.5% oleic acid displayed the lowest predicted glycemic index (pGI) (63.54) and highest resistant starch (RS) content (51.64%). However, excessive starch-lipid complexes were detrimental to EBNs cooking quality and the resistance of starch to digestive enzymes because of the damage to the continuity of the starch gel network. This study establishes a fundamental basis for the development of EBNs with superior cooking quality and a relatively lower GI.

In Vitro Antioxidant and Antimicrobial Properties of Composite Flour Formulations Developed Using Selected Local Grain Varieties

The aim of this study was to determine the in vitro antioxidant potential of four extruded and domestically prepared composite flour formulations developed by composting selected locally available grain varieties in Sri Lanka. The potential of the flour extracts to scavenge free radicals were evaluated by performing DPPH, ABTS, and FRAP assays. Furthermore, the antimicrobial activities of the flour formulations against selected Gram-positive and Gram-negative pathogenic microorganisms were comparatively evaluated using agar well diffusion and disk diffusion assays. Ethanol and water extracts of the samples were evaluated for their antimicrobial potential. The results showed that extruded samples possessed high antioxidant properties than samples prepared using the conventional cooking. Furthermore, the antioxidant potential of the formulations evaluated using different assays was strongly correlated. Moreover, the formulations reported positive antimicrobial potential against tested Gram-negative and Gram-positive bacteria. The ethanol extracts of flour formulations exhibited higher susceptibility to tested microbes than that of water extracts while agar well diffusion resulted significantly high inhibition against pathogenic bacteria than that of agar disk diffusion method (p < 0.05). In overall, the highest inhibition zone of 17.64 mm was depicted by F4 against Salmonella, while the lowest diameter of 6.09 mm was depicted by F1 against Listeria. In conclusion, the developed flour formulations contained natural antimicrobial agents which can combat common food spoilage and pathogenic bacteria and can be promoted as value-added products with health benefits beyond nutrition.

An investigation into the effects of various processing methods on the characteristic compounds of highland barley using a widely targeted metabolomics approach

This study explored the influence of diverse processing methods (cooking (CO), extrusion puffing (EX), and steam explosion puffing (SE), stir-frying (SF) and fermentation (FE)) on highland barley (Qingke) chemical composition using UHPLC-MS/MS based widely targeted metabolomics. Overall, 827 metabolites were identified and categorized into 16 classes, encompassing secondary metabolites, amino acids, nucleotides, lipids, etc. There 43, 85, 131, 51 and 98 differential metabolites were respectively selected from five comparative groups (raw materials (RM) vs CO/EX/SE/SF/FE), mainly involved in amino acids, nucleotides, flavonoids, and alkaloids. Compared to other treated groups, FE group possessed the higher content of crude protein (15.12 g/100 g DW), and the relative levels of free amino acids (1.32 %), key polyphenols and arachidonic acid (0.01 %). EX group had the higher content of anthocyanins (4.22 mg/100 g DW), and the relative levels of free amino acids (2.02 %) and key polyphenols. SE group showed the higher relative levels of phenolic acids (0.14 %), flavonoids (0.20 %) and alkaloids (1.17 %), but the lowest free amino acids (0.75 %). Different processing methods all decreased Qingke's antioxidant capacity, with the iron reduction capacity (988.93 μmol/100 g DW) in SE group was the lowest. On the whole, FE and EX were alleged in improving Qingke's nutritional value. CO and SF were also suitable for Qingke processing since fewer differential metabolites were identified in CO vs RM and SF vs RM groups. Differential metabolites were connected to 14 metabolic pathways, with alanine, aspartate, and glutamate metabolism being central. This study contributed theoretical groundwork for the scientific processing and quality control of Qingke products.

Effect of extrusion cooking on the chemical and nutritional properties of instant flours: a review

Satisfying the nutritional requirements of consumers has made food industries focus on the development of safe, innocuous, easy-to-prepare products with high nutritional quality through efficient processing technologies. Extrusion cooking has emerged as a prominent technology associated with the nutritional and functional attributes of food products. This review aims to establish a theoretical framework concerning the influence of extrusion parameters on the functional and nutritional properties of precooked or instant flours, both as end-products and ingredients. It highlights the pivotal role of process parameters within the extruder, including temperature, screw speed, and raw materials moisture content, among others, and elucidates their correlation with the modifications observed in the structural composition of these materials. Such modifications subsequently induce notable changes in the ultimate characteristics of the food product. Detailed insights into these transformations are provided within the subsequent sections, emphasizing their associations with critical phenomena such as nutrient availability, starch gelatinization, protein denaturation, enhanced in vitro digestibility, reduction in the content of antinutritional factors (ANFs), and the occurrence of Maillard reactions during specific processing stages. Drawing upon insights from available literature, it is concluded that these effects represent key attributes intertwined with the nutritional properties of the end-product during the production of instant flours.

Identification of the chemical composition of distiller's grain polyphenols and their effects on the fecal microbial community structure

Distiller grains are the main by-products of Baijiu production and are usually discarded, ignoring their abundant functional phytochemicals. The free and bound polyphenols from distiller grains were extracted and their potential effect on modulating fecal microbiota was investigated using in vitro fecal fermentation. The results showed that 34 polyphenols were quantified from distiller grains. The antioxidant activity was positively correlated with quercetin, myricetin, epicatechin, and naringenin. The abundance of Bifidobacterium, Ruminobacterium, Lactobacillus, Akkermansia, and butyrate-producing bacteria was enhanced by distiller's grain polyphenols by approximately 10.66-, 6.39-, 7.83-, 2.59-, and 7.74-fold, respectively. Moreover, the production of short-chain fatty acids (SCFAs), especially acetic, butyric, and propionic acid, was promoted (increased 1.99-, 1.71-, and 1.34-fold, respectively). Correlated analysis revealed quercetin, daidzein, and kaempferol as the key polyphenols by analyzing the effects on gut microbiota and SCFAs. This study could provide a reference for converting distiller grains into high-nutrient functional food ingredients and feeds.

Three thermal treated methods improve physicochemical and functional properties of wheat bran-germ and the bran-germ containing products

BACKGROUND

To fully investigate the effect of different stabilization methods on WBG in the same environment, we studied the effect of microwaving, baking, and extrusion on the nutritional, physicochemical, and processability properties of WBG and whole wheat bran-germ noodle (WBGN). Principal component analysis was used to comprehensively evaluate the qualities of WBG and WBGN. Machine learning-based research was conducted to predict the quality of WBGN based on the features of WBG.

RESULTS

The results showed that three methods improved antioxidant ability, bound flavonoids, bound and total phenolics, and the processing properties in WBG (P < 0.05). Extruded-WBG showed a lower polyphenol oxidase activity, lipase activity (35.02 ± 2.02 U and 20.29 ± 0.47 mg g^-1 ) and particle size (54.08 ± 0.38 μm), and higher water hold capacity (2.60 ± 0.68%) and bound phenolic levels. The enhanced quantity of bound polyphenols had a major role in the increased antioxidant potential of WBGN. Extruded-WBGN showed higher antioxidant ability for 2,2-diphenyl-1-picrylhydrazyl (171.28 ± 3.16 μmol Trolox eq kg^-1 ). The extruded-WBGN had high concentrations of WBG aroma compounds, and low contents of bitterness and raw bran-germ flavor compounds. Next, the enzymatic activity, powder properties, color, and antioxidant capacity of WBG were further utilized to predict the polyphenolic, flavonoids, flavor compounds, and antioxidant capacities of WBGN, where the R² value of the model exceeded 0.90. The best comprehensive quality modification method of the WBG and WBGN was extrusion, followed by baking and microwaving.

CONCLUSION

The present study shows that extrusion is a promising way to improve WBG into a nutritious and flavorful cereal food ingredient. © 2023 Society of Chemical Industry.

Polyethylene Glycol and Sorbitol-Mediated In Vitro Screening for Drought Stress as an Efficient and Rapid Tool to Reach the Tolerant Cucumis melo L. Genotypes

An efficient method to instantly assess drought-tolerant plants after germination is using osmoregulation in tissue culture media. In this study, the responses of three Iranian melon genotypes to sorbitol (0.1, 0.2, and 0.4 M) or polyethylene glycol (PEG) (0.009, 0.012, and 0.015 M) were evaluated as drought stress simulators in MS medium. 'Girke' (GIR), 'Ghobadloo' (GHO), and 'Toghermezi' (TOG) were the genotypes. GIR is reputed as a drought-tolerant genotype in Iran. The PEG or sorbitol decreased the coleoptile length, fresh weight, and photosynthetic pigments content while enhancing proline and malondialdehyde (MDA) contents. Protein content and antioxidant enzyme activity were utterly dependent on genotype, osmotic regulators, and their concentration. Coleoptile length, root and shoot fresh weight, root dry weight, proline and MDA content, and guaiacol peroxidase (GPX) activity can be used as indicators for in vitro screening of Cucumis melo L. genotypes. The results showed that sorbitol mimics drought stress better than PEG. Overall, our findings suggest that in vitro screening could be an accurate, rapid, and reliable methodology for evaluating and identifying drought-tolerant genotypes.

Novel Gluten-Free Breakfast Cereals Produced by Extrusion Cooking from Rice and Teff: Effects on Microstructural, Physical and Nutritional Properties

Current gluten-free products often have nutritional inadequacies. Teff is generating a growing interest for its excellent nutritional value. In this study, the effects of teff enrichment of extruded gluten-free breakfast cereals based on rice flour and two process parameters-feed moisture and temperature-were investigated based on their physical, microstructural and nutritional properties. The independent variables were modulated and examined by a Box-Behnken design. The incorporation of teff flour affected the sensory properties of extruded cereals, particularly lightness and crispness, with estimated linear effects of -6.91 and -8.49, respectively. The enrichment of breakfast cereals with teff flour also increased the total phenolic content and antioxidant capacity in both free and bound fractions, as well as the amount of insoluble dietary fibre. By varying all independent variables, the microstructural and physical properties of samples changed considerably. At the lowest feed moisture, wall thickness was small while showing the highest expansion. Samples with the highest teff flour addition exhibited an increased number of small pores which decreased crispness. These findings suggest that, by optimized extrusion cooking, the use of teff flour seems to be promising for the preparation of gluten-free breakfast cereals with superior nutritional properties and good structural characteristics.

Nutritional and bioactive components of rice-chickpea based snacks as affected by severe and mild extrusion cooking

BACKGROUND

Severe extrusion cooking (SEC) has been extensively explored for product development and has been compared with mild extrusion cooking (MEC). Different blends of chickpea-rice flour for extrusion can be used to achieve a balance between nutritive value and valued product characteristics. This study was therefore designed to optimize the severe and mild extrusion conditions for rice-chickpea flour blends to cater for increasing consumer demand for snacks with the aim of comparing the effects of severe and mild extrusion cooking (MEC) on nutritional quality.

RESULTS

The results revealed a significantly (P < 0.05) higher percentage reduction in sucrose during severe extrusion (46.85%) compared to mild extrusion (7.88%). Likewise, the percentage increase in maltose, glucose, and fructose was significantly (P < 0.05) higher during SEC than during mild extrusion. Total phenolic content increased by 13.96% during mild extrusion, whereas, during severe extrusion it decreased by 15%. Total flavonoid content and total antioxidant activity decreased by 11.11% and 15.63%, respectively, during severe extrusion whereas, total flavonoid content and total antioxidant activity increased by 13.17% and 24.29%, respectively, during MEC. The loss in condensed tannin content was significantly (P < 0.05) higher (33.82%) during SEC than with MEC (12.05%). With regard to amino acids, the maximum loss was observed in methionine (53.38%) followed by lysine (40.63%) during SEC. However, the mineral content was found to increase during SEC.

CONCLUSION

This study revealed that MEC is superior to SEC in terms of minimizing deleterious effects on overall nutritional value of ready-to-eat snacks. © 2022 Society of Chemical Industry.

Phytochemical properties and health benefits of pregelatinized Tartary buckwheat flour under different extrusion conditions

This work investigated the phytochemical properties and health benefits of Tartary buckwheat flour obtained with different extrusion conditions including high, medium, and low temperature. Extrusion significantly decreased the fat content and changed the original color of Tartary buckwheat flour. The contents of protein, total flavonoids, and D-chiro-inositol were affected by the extrusion temperature and moisture. Extrusion significantly decreased the total flavonoids and flavonoid glycosides contents, while it significantly increased aglycones. Compared to native Tartary buckwheat flour and pregelatinization Tartary buckwheat flour obtained with traditional extrusion processing technology, the pregelatinization Tartary buckwheat flour obtained with improved extrusion processing technology contained higher aglycones and lower flavonoid glycosides, which had stronger antioxidant capacity, α-glucosidase inhibitory activity and relatively mild α-amylase inhibitory activity. Correlation analysis proved that the aglycone content was positively correlated with antioxidant and α-glucosidase inhibitory activities. These findings indicate that the pregelatinization Tartary buckwheat flour obtained with improved extrusion processing technology could be used as an ideal functional food resource with antioxidant and anti-diabetic potential.

Butterfly Pea Flower as a Novel Ingredient to Produce Antioxidant-Enriched Yellow Pea-Based Breakfast Cereals

Butterfly pea flower (BP) is a rich source of bioactive components and can potentially be utilized to produce appealing, wholesome foods. Antioxidant and dietary fiber-enriched breakfast cereals were produced by extrusion cooking using blends of BP and yellow pea flour (YP). BP was added to YP at 0%, 5% and 10% levels (w/w), respectively, and extruded at two temperature profiles with die temperatures of 130 and 150 °C. Incorporation of BP significantly (p < 0.05) improved the total phenolics content, antioxidant properties, and insoluble and total dietary fiber content of the extrudates, with 10% BP extrudates showing the highest values. At a die temperature of 150 °C, the extrudates had a higher expansion ratio, a lower dry hardness, and a higher dry crispiness as compared to those at 130 °C. The color of BP-incorporated extrudates was darker and bluer as compared to the no-BP extrudates. The 10% BP extrudates retained relatively more of their hardness, crispiness, and crunchiness after soaking, indicating a better bowl-life and, therefore, better suitability of this blend formula for breakfast cereal production. Overall, this research shows that healthier breakfast cereals with appealing color and relatively longer bowl-life can be produced using BP, making BP a potential novel ingredient for extrusion formulations.

Production of cellulosic ethanol and value-added products from corn fiber

Corn fiber, a by-product from the corn processing industry, mainly composed of residual starch, cellulose, and hemicelluloses, is a promising raw material for producing cellulosic ethanol and value-added products due to its abundant reserves and low costs of collection and transportation. Now, several technologies for the production of cellulosic ethanol from corn fiber have been reported, such as the D3MAX process, Cellerate™ process, etc., and part of the technologies have also been used in industrial production in the United States. The ethanol yields range from 64 to 91% of the theoretical maximum, depending on different production processes. Because of the multicomponent of corn fiber and the complex structures highly substituted by a variety of side chains in hemicelluloses of corn fiber, however, there are many challenges in cellulosic ethanol production from corn fiber, such as the low conversion of hemicelluloses to fermentable sugars in enzymatic hydrolysis, high production of inhibitors during pretreatment, etc. Some technologies, including an effective pretreatment process for minimizing inhibitors production and maximizing fermentable sugars recovery, production of enzyme preparations with suitable protein compositions, and the engineering of microorganisms capable of fermenting hexose and pentose in hydrolysates and inhibitors tolerance, etc., need to be further developed. The process integration of cellulosic ethanol and value-added products also needs to be developed to improve the economic benefits of the whole process. This review summarizes the status and progresses of cellulosic ethanol production and potential value-added products from corn fiber and presents some challenges in this field at present.

Effect of extrusion processing on techno-functional, textural and bioactive properties of whole grain corn flour-based breakfast cereals sweetened with honey

The present study investigated the effect of honey and extrusion processing parameters on techno-functional and bioactive properties of wholegrain corn flour breakfast cereals. The central composite rotatable design (CCRD) was used to plan the experiments using feed moisture (FM), extrusion temperature (ET), and honey level as process variables and sectional expansion ratio (SER), bulk density (BD), water absorption index (WAI), water solubility index (WSI), and textural hardness as response variables. The feed containing honey and wholegrain corn flour was extruded through a twin-screw extruder according to CCRD. The data were fit in the appropriate regression models based on model significance and insignificant lack-of-fit. The selected experiments from CCRD were considered for studying the bioactive properties and the effect of ET and honey level on bioactive properties was determined. The results of the study indicated that FM and honey adversely affected the SER, BD, and textural hardness while ET augmented these properties of breakfast cereals. The WAI decreased with an increase in honey level and ET during extrusion. The incremental addition of honey in the mix as well extrusion at elevated temperature led to higher WSI. The whole grain corn flour added with 10.22% honey and extruded at 16.06% FM, and 138.07 ^o C ET produced optimum quality breakfast cereals with 0.70 desirability. The total phenolic content of breakfast cereals decreased and antioxidant activity, and hydroxymethylfurfural content increased upon extrusion at the higher temperatures. Honey addition lowers the loss of phenolic content during extrusion and improved the antioxidant activity of breakfast cereals. This article is protected by copyright. All rights reserved.

Evaluating the Effects of Wheat Cultivar and Extrusion Processing on Nutritional, Health-Promoting, and Antioxidant Properties of Flour

Wheat has been considered one of the most important staple foods for thousands of years. It is one of the largest suppliers of calories in the daily diet, which is added to many different products. Wheat is also a good source of health-benefiting antioxidants. This study aims toinvestigate the changes in the antioxidant properties, such as total phenol content, 2,2-diphenyl-1-picrylhydrazyl (DPPH), metal chelating activity, 2,2′-azino-bis (3-ethylbenz-thiazoline-6-sulfonic acid) diammonium salt (ABTS⁺) scavenging activity, and color intensity, during the extrusion processing of six different wheat cultivars. The extrusion factors evaluated were 15% feed moisture and two extrusion temperatures (150 and 180°C). Extrusion processing increased antioxidant activity (DPPH, metal chelating activity, and ABTS⁺ scavenging activity), whereas total flavonoids content and total phenolic content were decreased. The L^* values of wheat flours increased significantly (p < 0.05) after extrusion at 150 and 180°C, 15% mc. Furthermore, redness was decreased from control wheat cultivars (range: 0.17–0.21) to extrusion at 150°C (range: 0.14–0.17) and 180°C (range: 0.1–0.14). The study suggests that extruded wheat could improve the antioxidant potential in food products.

Effect of Flaking and Precooking Procedures on Antioxidant Potential of Selected Ancient Cereal and Legume Flours

Consumption of cereals (and particularly ancient cereals) is considered the base of a healthy diet, and all current dietary guidelines have cereals at the bottom of the nutrition pyramid. Together with cereals, legumes are an excellent source of nutrients and nutraceuticals. The effects of agroindustrial pretreatments (flaking and precooking processes) on the antioxidant potential of flours from ancient cereals and legumes were studied. The extraction of free hydrophilic phenolic compounds was carried out in a hydroalcoholic solvent mixture via an ultrasound-assisted process. Furthermore, the solid residue was successively hydrolyzed by an alkaline solution to extract the bound phenolic fraction. Both free and bound extracted fractions were then quantitatively characterized for total polyphenolic and flavonoid contents, and the antioxidant potential was determined by carrying out the ABTS and DPPH radical scavenging assays, expressing the results (in both cases) as the Trolox equivalent antioxidant capacity (TEAC/ABTS and TEAC/DPPH, respectively). The samples were also extracted in organic apolar solvents (acetone or water-saturated iso-butanol) to quantitatively characterize lipophilic antioxidant compounds and pigments. A discussion on the comparison of these analytical parameters of flours obtained from raw, flaked, and precooked cereals and legumes is reported revealing that (i) phenolic compounds are mainly present in the post-hydrolysis extract (bound fraction), (ii) the precooking process significantly reduced the concentration of antioxidants, (iii) the flaking process slightly increased the phenolic content, (iv) legumes were less influenced by pretreatments, suggesting the possibility of using legumes to enrich cereal foods.

Anti-nutrient & bioactive profile, in vitro nutrient digestibility, techno-functionality, molecular and structural interactions of foxtail millet (Setaria italica L.) as influenced by biological processing techniques

The present investigation aimed at assessing the impact of biological processing techniques on bio-and techno-functional characteristics of foxtail millet (Setaria italica L.). Grains were exposed to soaking, germination, fermentation and combination of aforesaid treatments and significant variation (p < 0.05) in anti-nutritional factors, in vitro starch and protein digestibility, bioactive constituents and associated antioxidant potential was noted. Bioprocessed flours were characterized by altered functional properties due to hydrolytic action of activated enzymes. ATR-FTIR spectra and X-ray diffraction patterns revealed structural variation in macromolecular arrangement, synthesis of bioactive compounds in bioprocessed flours and slight reduction in the crystallinity of starch molecules. Bioprocessed flours exhibited degraded protein matrix; however, only fermentation and combination treatments caused hydrolysis of granular starch. Principal component analysis was employed to validate the differences in processing treatments and observations. The results are suggestive that bioprocessed flours could serve as potential ingredients with improved techno-and bio-functionality in valorized cereal products.

Enrichment in Different Health Components of Barley Flour Using Twin-Screw Extrusion Technology to Support Nutritionally Balanced Diets

Due to its good dietary role, barley has attracted a growing amount of interest for the manufacture of functional foods in recent years. In barley, a number of bioactive components, including as phenolic compounds, have been discovered, and barley extrudates could be used to formulate various processed foods, including ready-to-eat cereals, baby, and pet foods and support nutritionally balanced diets. This study was conducted to investigate the effect of extrusion processing on resistant starch (RS), glycemic index (GI), and antioxidant compounds of barley flour. The L^* and ΔE values of barley flours decreased significantly (p < 0.05) after extrusion is done at 150 and 180°C. The a^* and b^* values, however, increased after extrusion. Extrusion increased antioxidant activity (AOA), metal chelating activity (MCA), and ABTS⁺ scavenging activity, whereas total phenolic content (TPC) and total flavonoids content (TFC) decreased. Barley extrudates at 150 and 180°C showed decreased TPC by 16.4–34.2% and 23.4–38.1%. Moreover, improved RS and reduced GI values were recorded for barley extrudates as compared to barley non-extrudates. Therefore, extrusion of barley could be an alternative to produce pregelatinized barley flour with improved RS low GI values and improved antioxidant potential.

The Influence of Hop Phenolic Compounds on Dry Hopping Beer Quality

Background: The article considers the phenolic hop compounds’ effect on the quality indicators of finished beer. The topic under consideration is relevant since it touches on the beer matrix colloidal stability when compounds with potential destabilizing activity are introduced into it from the outside. Methods: The industrial beer samples’ quality was assessed by industry-accepted methods and using instrumental analysis methods (high-performance liquid chromatography methods—HPLC). The obtained statistical data were processed by the Statistics program (Microsoft Corporation, Redmond, WA, USA, 2006). Results: The study made it possible to make assumptions about the functional dependence of the iso-α-bitter resins and isoxanthohumol content in beer samples. Mathematical analysis indicate interactions between protein molecules and different malted grain and hop compounds are involved in beer structure, in contrast to dry hopped beer, where iso-a-bitter resins, protein, and coloring compounds were significant, with a lower coefficient of determination. The main role of rutin in the descriptor hop bitterness has been established in kettle beer hopping technology, and catechin in dry beer hopping technology, respectively. The important role of soluble nitrogen and β-glucan dextrins in the perception of sensory descriptors of various technologies’ beers, as well as phenolic compounds in relation to the formation of bitterness and astringency of beer of classical technology and cold hopping, has been shown. Conclusions: The obtained mathematical relationships allow predicting the resulting beer quality and also make it possible to create the desired flavor profiles.

Assessment of Casuarina glauca as biofiltration model of secondary treated urban wastewater: effect on growth performances and heavy metals tolerance

The use of fast-growing tree species, such as Casuarina glauca for wastewater treatment could improve the quality of wastewater and offer an ecological and sustainable system. A hydroponically experiment was conducted to evaluate C. glauca ability to remove heavy metals from secondary treated urban wastewater (SWW). The effect of the SWW on plant biomass, some physiological parameters, heavy metals (Cd, Pb, Ni and Zn) bioaccumulation and removal from wastewater was evaluated. After 28 days, wastewater treatment C. glauca showed high efficiency for the removal of pathogenic bacteria such as faecal coliforms and faecal streptococci from SWW. A significant reduction was found for electrical conductivity, biochemical oxygen demand, chemical oxygen demand and suspended solids with 31%, 92%, 83% and 31% respectively. Casuarina glauca plants were able to remove heavy metal ions Cd, Pb, Ni and Zn from SWW and the removal efficiency was 92%, 77%, 83% and 73%, respectively. Casuarina glauca plants accumulated concentrations of heavy metals (Cd, Pb, Ni and Zn) in their roots higher than the shoots. SWW had a remarkable effect on plant growth and photosynthetic capacity in C. glauca compared with plants grown in tap water (control). The results indicated that C. glauca can act as scavengers of heavy metal ions from polluted water and confirms their ability for wastewater treatment.

The effect of Vaccinium bracteatum Thunb. leaves addition on antioxidant capacity, physicochemical properties, and in vitro digestibility of rice extrudates

Vaccinium bracteatum Thunb.leaves (VBTL) are a traditional Chinese herbal medicine with potential natural pigments and antioxidants. Its application information on extrusion is limited. In this study, to increase the usage of foods containing VBTL, rice-based extrudates with VBTL were investigated. The extrusion was performed at a wide temperature range (60-140°C) and with different VBTL supplementations (3%-10%). The extrudates with 10% VBTL showed a significant decrease in total phenolic content (TPC), total flavonoid content (TFC), and antioxidant activity upon extrusion. TPC and TFC increased with the rise of barrel temperature. The VBTL color was stable during the wide-temperature extrusion process. The bioactivities of the extrudates were positively correlated with the VBTLsupplement (R = 0.943-0.989). In addition, different addition levels of VBTL significantly changed the water absorption index (WAI), water solubility index (WSI), pasting properties, and in vitro starch digestibility of the extrudates. Moreover, extrudates with 3% VBTL showed the highest WAI and peak viscosity but the lowest in vitro starch digestibility. These results may suggest that rice extrudates with a low supplement of VBTL have an acceptable color and may be used as functional additives for high antioxidant and low glycemic response diets. PRACTICAL APPLICATION: The results showed that the Vaccinium bracteatum Thunb. leaves (VBTL) color and antioxidation were stable during the wide-temperature extrusion process. Extrusion processing can be used to enlarge the usage of VBTL and simplify its traditional processing method. Applying VBTL to the process of extrusion appears to be a suitable method of producing value-added and low glycemic response extrudates.

Changes in Phenolics during Cooking Extrusion: A Review

In this paper, significant attention is paid to the retention of phenolics in extrudates and their health effects. Due to the large number of recent articles devoted to total phenolic content (TPC) of input mixtures and extrudates, the technological changes are only presented for basic raw materials and the originating extrudates, and only the composites identified has having the highest amounts of TPC are referred to. The paper is also devoted to the changes in individual phenolics during extrusion (phenolic acids, flavonoids, flavonols, proanthocyanidins, flavanones, flavones, isoflavons, and 3-deoxyanthocyanidins). These changes are related to the choice or raw materials, the configuration of the extruder, and the setting the technological parameters. The results found in this study, presented in the form of tables, also indicate whether a single-screw or twin-screw extruder was used for the experiments. To design an extrusion process, other physico-chemical changes in the input material must also be taken into account, such as gelatinization of starch; denaturation of protein and formation of starch, lipids, and protein complexes; formation of soluble dietary fiber; destruction of antinutritional factors and contaminating microorganisms; and lipid oxidation reduction. The chemical changes also include starch depolymerization, the Maillard reaction, and decomposition of vitamins.

Properties of Extruded Snacks Prepared from Corn and Carrot Powder with Ascorbic Acid Addition

The objective of this research was to investigate the potentiality of carrot powder (CP) utilization at levels 4, 6, or 8% as ingredient of corn snacks and evaluation of the extrusion influence on functionally important ingredients such as carotenoids (color), polyphenols, fiber, fat, and antioxidant activity. The influence of ascorbic acid (AA) as an external source at levels 0.5 and 1% on this particular extrusion was also investigated. A single-screw extruder at two temperature regimes (135/170/170 °C (E1) and 100/150/150 °C (E2)) carried out extrusion. The E1 temperature regime acted favorably on total polyphenol content and crude fiber, but fat preferred the E2 regime. Extrusion, especially the E1 temperature regime, increased the extractability of carotenoids. Ascorbic acid degraded during extrusion, but it still provided protection to carotenoids and color attributes of extrudates. Snacks with increased nutritional and functional value due to carrot powder addition were successfully produced, which is a starting point for production of a new type of extruded snacks.

Extruded coffee parchment shows enhanced antioxidant, hypoglycaemic, and hypolipidemic properties by releasing phenolic compounds from the fibre matrix

The dietary fibre and phenolic contents and the functional properties of extruded coffee parchment flour were studied to evaluate its possible use as an ingredient rich in dietary fibre (DF) with potential antioxidant, hypoglycaemic and hypolipidemic properties in extruded products. Coffee parchment flour treated at 160-175 °C and 25% moisture feed showed higher DF (84.3%) and phenolic contents (6.5 mg GAE per g) and antioxidant capacity (32.2 mg TE per g). The extrusion process favoured the release of phenolic compounds from the fibre matrix. Phytochemicals liberated during in vitro simulated digestion exhibited enhanced antioxidant capacity and attenuated reactive oxygen species in intestinal cells (IEC-6). However, the physicochemical and techno-functional properties were just affected by extrusion at high temperature, although extruded coffee parchment flours exhibited lower bulk density and higher swelling capacity than non-extruded ones. Extruded coffee parchment preserved the glucose adsorption capacity and enhanced the α-amylase in vitro inhibitory capacity (up to 81%). Moreover, extruded coffee parchment maintained the ability to delay glucose diffusion and exhibited improved capacity to retard starch digestion in the gastrointestinal tract. The extrusion of coffee parchment flours preserved the cholesterol-binding ability and augmented the capacity of this ingredient to bind bile salts, favouring the inhibition of pancreatic lipase by coffee parchment. These discoveries generate knowledge of the valorisation of coffee parchment as a food dietary fibre ingredient with antioxidant, hypoglycaemic, and hypolipidemic properties that are enhanced by the release of phenolic compounds from the fibre matrix through the production of extruded products.

Food Industry By-Products as Raw Materials in the Production of Value-Added Corn Snack Products

The addition of brewer's spent grain (BSG), sugar beet pulp (SBP) and apple pomace (AP), on the nutritional properties of directly expanded snack products based on corn grits was investigated. Snack products were produced in a laboratory single screw extruder with the addition of 5, 10 and 15% d. m. of these by-products in corn grits. Chemical composition, total phenolic content, antioxidant activity, dietary fiber, resistant starch, starch damage and pasting properties of the mixtures and extruded samples were determined. Extrusion process and by-product additions had a significant effect on the proximate chemical composition. All three by-products increased contents of both soluble and insoluble dietary fiber, while the extrusion caused a reduction of insoluble fiber and increase of soluble fiber. After the extrusion process starch damage and antioxidant activity increased, while resistant starch content and total polyphenol content decreased. According to obtained results, it can be concluded that the investigated by-products can be used in the production of nutritionally more valuable corn snacks.

Characterisation of Wheat–Oat Flour Extrudate: Physicochemical and Β-Glucan Attributes

The objective of this study was to evaluate the effect of wheat–oat flour ratio on the physical properties and β-glucan characteristics of extrudates. Results showed that increasing the wheat–oat flour ratio resulted in a decrease in the water solubility index (r2=0.8567) and hardness (r2=0.9316), whereas the expansion ratio (r2=0.9307) and water absorption index (r2=0.9061) increased. Wheat flour generally caused an increase in L values from 57.81 to 62.94 providing bright samples. Few cells were observed at high wheat–oat flour ratios under a scanning electron microscope, and a smooth surface was noted. Meanwhile, the total (r2=0.9867) and soluble (r2=0.9848) β-glucan contents were inversely proportional to the wheat–oat flour ratio. Extrudates with added wheat flour had a high molecular weight, but wheat flour had no significant (P<0.05) effect on the viscosity of β-glucan extracts. Conclusively, incorporation of wheat flour at a wheat–oat flour ratio of 2.33 provides ready-to-eat food based on whole oat flour, on account of improving the texture and providing sufficient β-glucan contents (0.806 g/100 g) without significantly affecting β-glucan viscosity.

Antimicrobial, Antioxidant, Sensory Properties, and Emotions Induced for the Consumers of Nutraceutical Beverages Developed from Technological Functionalised Food Industry By-Products

This study aims to develop nutraceutical beverages containing food processing by-products in their formulation, and determine the opinion of consumers. This is done by testing whether they know that the main ingredients of the product are by-products, performing an overall acceptability test of the developed beverages, and evaluating the emotions induced by the newly developed beverages for consumers. The main ingredients used for the preparation of added-value beverages were fermented milk permeate (containing galactooligosaccharides), extruded and fermented wheat bran (WB) (containing ≥6.0 log₁₀ CFU g⁻¹ viable antimicrobial properties showing lactic acid bacteria (LAB) strains), and different fruit/berry by-products (FBB) (as a source of compounds showing antioxidant properties). The definition of the quantities of bioactive ingredients was based on the overall acceptability of the prepared beverages, as well as on emotions induced in consumers by the tested beverages. Functional properties of the developed beverages were proofed by the evaluation of their antimicrobial and antioxidant properties, as well as viable LAB count during storage. Desirable changes in extruded and fermented WB were obtained: Fermentation reduced sugar concentration and pH in samples with predominant lactic acid isomer L(+). In addition, the viable LAB count in the substrate was higher than 6.0 log₁₀ CFU g⁻¹, and no enterobacteria remained. By comparing the overall acceptability of the beverages enriched with WB, the highest overall acceptability was shown for the samples prepared with 10 g of the extruded and fermented WB (7.9 points). FBB showed desirable antimicrobial activity: Shepherd inhibited—2, sea buckthorn—3, blueberries—5, and raspberries—7 pathogens from the 10 tested. Comparing different beverage groups prepared with different types of FBB, in most cases (except sea buckthorn), by increasing FBB content the beverages overall acceptability was increased, and the highest score (on average, 9.5 points) was obtained for the samples prepared with 5.0 and 7.5 g of blueberries FBB. Moreover, a very strong positive correlation (r = 0.8525) was found between overall acceptability and emotion “happy” induced in consumers by the prepared beverages enriched with extruded and fermented WB and FBB. By comparing the samples prepared with the addition of WB with samples prepared with WB and FBB, it was observed that most FBB increased total phenolic compounds (TPC) content (on average, by 9.0%), except in the case of samples prepared with sea buckthorn. A very high positive correlation (r = 0.9919) was established between TPC and antioxidant activity. Finally, it can be stated that the newly developed nutraceutical beverages were acceptable for consumers, induced positive emotions, and possessed desirable antimicrobial and antioxidant properties, while being prepared in a sustainable and environmentally friendly manner.

Peptides from Extruded Lupin (Lupinus albus L.) Regulate Inflammatory Activity via the p38 MAPK Signal Transduction Pathway in RAW 264.7 Cells

In this study, protein was extracted from extruded lupin and submitted to gastroduodenal digests to obtain lupin peptides, which were characterized using ultraperformance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). After this, IQDKEGIPPDQQR (IQD), the lupine peptide monomer characterized after UPLC-MS/MS, was screened out by macrophage inflammatory cytokine production assay. RNA-sequencing analysis was performed to explore the mechanisms underlying the anti-inflammatory activity associated with this peptide. The results indicated that lupin peptides effectively inhibited the lipopolysaccharide-induced overproduction of proinflammatory mediators. IQD inhibited the production of tumor necrosis factor-α, interleukin (IL)-6, IL-1β, and monocyte chemoattractant protein-1 by 51.20, 38.52, 44.70, and 40.43%, respectively. RNA-sequencing results showed that IQD inhibited the inflammatory response by regulating the gene expression of the p38 mitogen-activated protein kinase pathway and inhibiting downstream inflammatory cytokines. These bioactive peptides may be used to develop new ingredients for anti-inflammatory nutritional supplements.